#4154: Professor X

PROFESSOR X

X-MEN: THE MOVIE (TOY BIZ)

“Charles Francis Xavier possesses the most powerful mind on earth. The mutant telepath also known as Professor X can read the thoughts of others, impose his own will to take over other people’s minds or erase their memories. This visionary has dedicated his life to fighting for his dream of peaceful co-existence between man and mutantkind. To aid in this crusade, he founded a school for gifted youngsters to secretly train young mutants to control their amazing powers. Xavier now uses his special abilities to lead his clandestine team of “X-Men” into battle against Magneto and his brotherhood of evil mutants.”

It has been a week since the passing of Sir Patrick Stewart, and, honestly, I’m still kind of at a loss for words about it.  I never got the chance to meet him, but he had an immense impact on my life (along with many, many others), and there’s this sort of a hollow feeling about the whole thing still.  Sir Patrick took on many roles in his 86 years, but he devoted decades of his life to the roles of Jean-Luc Picard and Charles Xavier, both part of rather merchandise driven franchises, so he did at least get his fair share of action figures along the way.  His final film performance will be in December’s Avengers: Doomsday, where he reprises the role of Charles Xavier for the ninth and final time.  I’m jumping back to the very beginning of this particular journey, with his figures from the very first X-Men movie.

THE FIGURE ITSELF

Professor X was released in the first series of Toy Biz’s X-Men: The Movie tie-in line, released alongside the second series in the spring of 2000, to coincide with the release of the first movie.  There were two variants released, with different suit colors.  The standard release was the blue suit with the red tie, while the slightly rarer variant was the black suit with the silver tie.  The figure is just under 6 inches…long I guess would be the best way to describe him?  Tall is incorrect, because he doesn’t stand.  He has 12 points of movement, but I hesitate to call it all articulation.  Why all the roundaboutness?  Because the figure’s hip and knee joints are super loose, so they cannot hold a pose or even really sustain the figure’s weight.  That would make this perhaps the only Xavier mold to properly recreate his paralysis, so kudos to Toy Biz on that.  The mold was new to this line, and it’s a little bit awkward at times, especially compared to the more naturalistic sculpting of some of the line’s other figures.  He’s a bit stiff, and most of the articulation is rudimentary in its implementation.  There are some interesting quirks to the mold; there’s two peg holes in the back meant to connect him to his chair, as well as an additional sort of lever, which moves his arms upward, for some sort of magnetic feature that’s kind of odd and hard to understand the utility of.  The head sculpt is an interesting piece in that it’s kind of hard to address its quality without talking about the paint.  The original release, the blue suit, leaves the head’s skin tone unpainted, which leaves the sculpt with very little resemblance to Stewart.  The black suited variant, however, fully paints the head, resulting in a far better likeness.  It’s honestly astounding how much of a difference the paint application can make.  Both versions of the figure include the same chair, a rather involved piece of work, with a magnetic feature on the back and a pull-back motorized feature for the wheels.  It’s an accurate recreation of the signature chair used in the movies, and Toy Biz would also re-use the same mold for their Marvel Legends Professor X a few years later.  Professor X also included a Cerebro helmet accessory, which I’m unfortunately missing from both of my figures.  The second round of figures from the movie also included a third Professor X variant, this time sporting his non-metal chair from his visit to Magneto’s jail cell at the end of the movie.  The main Xavier figure uses the same mold, with a third paint scheme (and once again paints the skin on the head, for a far better likeness), while the chair has been modified to be a little closer to the one from the end of the movie.  It’s not a perfect recreation of the piece seen in the movie, since it just changes the wheels and arm rests, but it gets the idea across.

THE ME HALF OF THE EQUATION

The release of the first X-Men movie is the first time I can really recall being hyped for a movie release.  I followed all the news and casting announcements closely, and I was very excited about Patrick Stewart’s presence, as he was honestly the only actor I knew beforehand.  When the figures hit, obviously, my first figure was Cyclops, but when my Nana took my cousin Rusty and I to Toys “R” Us to pick out some figures for a “hey you finished school” treat, I got to pick out two more X-Men and I chose Jean and Professor X.  There was some back and forth about the choice, and a definite push to get me to buy Magneto and Wolverine instead, but I couldn’t be swayed, so I got my Jean and Professor X.  That was the blue suited Xavier, with the spotty likeness.  I got the clear chair Xavier next, courtesy of a trip to KB Toys with my Grandmother (which also got me Civilian Cyclops), and I kind of figured that was it for my movie Xaviers.  But, when cleaning my room a while later, I found a Toys “R” Us gift card I didn’t know the value of, and my parents told me I could get whatever the value of the card would cover.  The card had somewhere in the area of $2 on it, so I was left digging through the clearance bin, which is how I found the variant Xavier, thus rounding out the set.  None of them are great figures, but there are limited options for Stewart Xavier figures, and to that end, I do quite like them.

Sir Patrick Stewart brought an immeasurable level of class and depth to every one of his very many roles (yes, even the Poop Emoji), and had a sincere presence that’s not easily found.  He was also, by all accounts, just a very good person, who stood up for those he felt needed it, and we could honestly use more people like him.  Losing him is huge, and his presence will very much be missed.

#4153: Batman

BATMAN

SUPER POWERS (McFARLANE)

“As a child, Bruce Wayne watched as his parents were brutally killed in Gotham City’s Crime Alley. Traumatized by their deaths, he devoted his life to becoming the world’s greatest weapon against crime– the Batman.”

As prevalent as the character may be in toy form, I don’t actually review *a ton* of Batman figures around here, mostly because I think I’m just largely tapped out on buying new Batman figures these days?  McFarlane’s tenure with the DC license has had a lot of Batman figures, and their Super Powers line has Batman as its recurrent character.  Despite that, I’ve only thus far picked up and reviewed a single Super Powers Batman (I guess technically reviewed a Batman Beyond as well, but I feel like that’s different).  Well, they’re selling the figures in sets now, so I can’t avoid it if there’s a Batman variant, and if I’m gonna buy him, I guess I might as well review him.  So, here’s this Batman.

THE FIGURE ITSELF

Batman is the first figure in Series 15 of McFarlane’s Super Powers line, where he’s officially numbered 73 in the overall line-up.  He’s the 12th Batman released in the line.  The figure is just the tiniest bit over 4 1/2 inches tall and he has 7 points of articulation.  This Batman marks the seventh use of the updated classic Batman mold, which was the only other Batman I’ve looked at from this line.  It’s clearly aiming to be a pretty close replica of the original Kenner mold, and it’s a good one at that.  I get why they keep using it.  What makes this release special?  The coloring.  The first release of the mold went for a pretty straight classic Batman blue and grey color palette, and subsequent uses have all tweaked it in some way.  We’ve gotten one subsequent take on that scheme through the crowd funded release, which was darker than the first version, and now we’ve got this one, which is…also darker?  Its aim is to be an early ‘90s Batman, per the naming, and I guess it does that fine, but it’s also not super different, aside from just being different.  It’s definitely a bit of different for different’s sake.  I know the Series 4 release was pretty hard to get, so I can’t say I fault McFarlane for wanting to put out another go at the mold with the blue and grey, but I also can’t say it’s terribly exciting.

THE ME HALF OF THE EQUATION

I was very excited by the reveals of 13 and 14 of this line, but 15 was the first one where I just felt largely underwhelmed, and this Batman is certainly a large piece of that.  Maybe I’d feel different if I hadn’t gotten the Series 4 figure? I don’t know.  I do know I only have this one because I wanted the set.  He’s…fine.  Like, not bad, but just not anything to really give any much thought to.

#4152: Galactus

GALACTUS

FANTASTIC FOUR (TOY BIZ)

“Feared throughout the cosmos, the nearly omnipotent Galactus must consume the life energies of entire planets to satisfy his burning hunger! Only the herculean efforts of the Fantastic Four and Galactus’s former herald, the Silver Surfer, have prevented the world-devourer from making a meal of the Earth! But, should he return, the future of all mankind will once again be in doubt!”

Just before my winter hiatus last December, I wrapped up my reviews of the all the standard figures from Toy Biz’s Fantastic Four toyline.  I didn’t, however, quite look at *all* the figures, because they weren’t all exactly created equal.  If you’re doing really much of anything at all with the FF, you’re bound to run into their big, planet-eating foe, Galan of Taa, the Devourer of Worlds, best known as Galactus.  Galactus has a number of appearances on Fantastic Four: The Animated Series, and his herald Silver Surfer was present in the first series of the tie-in toyline, so it made quite a bit of sense for the big G to be included as well, and in fact he was, with a deluxe sized figure that I’ll be taking a look at today!

THE FIGURE ITSELF

Galactus was released in 1995, alongside the first series of Toy Biz’s Fantastic Four line.  He was his own stand alone release, a deluxe item offered up in a similar fashion to the dragons from the Iron Man line at the same time, and also somewhat like the Sentinel released in the X-Men line the year prior.  Galactus did differ from those other releases, however, in his use of electronic features.  The figure stands just under 14 1/2 inches tall and he has 7 points of articulation.  In terms of scaling, Galactus is clearly not quite the towering giant he tends to be, relative to the others, he’s got a good 9 inches on the standard figures, making him larger enough visibly to sell the idea, while not being so large as to be an impractical size for play and display. Galactus’s articulation is very much a restricted thing, with motion at the shoulders, elbows, wrists, and neck.  The neck is a very small degree of back and forth movement, and the arms, though certainly better in their range, still aren’t really doing much other than sitting at his sides or raising up a bit to hold his accessory.  Due to the electronic features, there is no movement at all in the waist or legs, so he’s a bit more statuesque in that regard.  He’s mostly just meant for standing there and looking rather menacing, which, to be fair, is kind of his main deal.  The mold was brand-new to Galactus at the time (tough the main bulk of it was later re-used for a second deluxe Galactus figure as part of the Silver Surfer tie-in line in 1998), patterned on his classic comics design, as well as aligning with his design as seen in the cartoon at the time (specifically his appearance in Season 1).  It’s more on the basic and stripped down side in terms of detailing, going for broader strokes, softer detailing, and some simpler line work.  The proportions are notably on the chunky side of things, and his head, already enlarged by the helmet, seems a bit too large for the body it’s sitting upon.  There are also some compromises made for the sake of the action features, with a mount on the torso for his accessory, as well as holes in the eyes where the pupils would be, in order to make way for the light up feature, and a spot for a speaker in his abdomen.  The most jarring of these is definitely the mount on the torso, but that’s easier to explain away as having a practical use on his armor, I suppose.  Though certainly leaning more into the toy side, the sculpt does still do a decent enough job of bringing his design into toy form, and it certainly fits well with the other figures stylistically.  The figure’s “horns” and skirt pieces are separate, removable parts on this release.  The horns can warp a bit (as seen on my figure), but do click into place securely.  The skirt pieces….don’t click into place securely, especially the back one, which will fall off at just about any given chance.  Galactus’s color work follows the usual hallmarks of his design, with a lot of purple and blue.  There’s some rather notable issues of matching between the different parts of his assembly, which is a little odd, but the design has enough segmentation to at least hide it a bit more.  Galactus was packed with a large “drill” accessory, which he can hold in front of him and which connects to the front of the figure.  There are actually two variants to the exact connection style of the drill, as seen in the photo, but the Galactus figure’s connection appears to remain the same.  There is a lights and sounds feature to the figure, and the drill interacts with this as well, but between the two copies of this figure I currently own, I wasn’t able to get either working to test it out.  For shame.

THE ME HALF OF THE EQUATION

I got my original Galactus, at least in part, because he was defective.  The local KB Toys had one whose electronic features didn’t work, so he was discounted, and my dad bought it so that he and my granddad could repair him and get him into working order, and, boom, working Galactus.  For a while, anyway.  This guy got carried around a lot to a lot of different things and certainly got a lot of play time before spending about a decade in the garage, without most of his parts.  In recent years, I’ve put some more serious effort into returning him to his original glory, and found all of his original parts, minus a single horn for his helmet.  Do you know how difficult it is to find just a single horn for a Toy Biz Galactus?  Really difficult, I’ll tell you.  The most practical way to go about it, it turns out, is just buying a second, complete, Galactus, which I in fact did (well, my Dad did, swooping in to buy the second one for me like he did the original) over the summer, when I found one for a good price at Yesterday’s Fun while vacationing with the family.  Perhaps this figure isn’t quite as impressive as the more recent HasLab release, but he certainly fills out the Toy Biz Fantastic Four line-up nicely, and I’m happy to have him back together again.  There: now I’m actually done with the Fantastic Four reviews.