Tag Archives: Marvel

#0360: Iceman, Bobby Drake, & Sentinel(s)

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ICEMAN, BOBBY DRAKE, & SENTINEL(S)

MARVEL MINIMATES

Of all the original X-Men, Bobby Drake, aka Iceman, is probably the most straight forward. It’s all there in the name. He’s a guy who does stuff with ice. That’s pretty simple. Interestingly enough, he was also one of the first X-Men to make it big, thanks to his role as one of the titular friends in Spider-Man and His Amazing Friends. He’s often looked at as rather goofy, but he’s actually got one of the more impressive power sets on the team. Anyway, Bobby has distinctive looks for his powered up and powered down forms, and it’s rare to see the powered down form in the toy world. Diamond is using their recent All-New X-Men themed wave to break convention and give us both versions of him, as well as one of those wacky, purple, mutant-hunting robots, the Sentinels.

THE FIGURES THEMSELVES

These figures were released in Series 59 of Marvel Minimates. Each of the Icemen was packed with a Sentinel, with the iced-up version being the more plentiful version and Bobby Drake being the one-per-case variant for this series.

ICEMAN

Iceman pretty much breaks even on the whole “All-New” thing. Bobby really hasn’t had much happen to him since the early days of the X-Men, so his character has remained relatively the same. Still, you can’t bring all but one of the original X-Men forward in time; they’re kind of a package deal. Iceman is about 2 ½ inches tall and he’s got 14 points of articulation. He’s in his iced-up form, but you can make out most of his Immomen-designed costume. Iceman is a “vanilla ‘mate,” which means he’s built out of the standard Minimate body with no other add-ons. It’s not really a surprise, since that’s in line with the design. This means the figure is entirely reliant on the paint. The good thing here is that Iceman easily has the cleanest paintwork in the series. He’s molded in solid white plastic, which is a departure from the usual semi-transparent plastic we’ve seen on previous figures. I think I like it better because the detail lines stand out much better. The detail work is really great, with all the proper line work for his uniform, as well as some additional texturing to really sell the ice look. Iceman includes an ice blast, an ice sled, and a clear display stand. Both of the ice structures are new to this figure, and they look really great, sculpt wise. The ice sled is a piece I’ve been waiting to see for quite some time now.  However, the pieces are a little bit yellowed, which doesn’t seem right.

BOBBY DRAKE

Ah, yes, the illusive Bobby Drake. So, this is what Iceman looks like powered down. How about that? Like his icy incarnation, Bobby is about 2 ½ inches tall and features 14 points of articulation. He’s completely powered down, allowing you to see his All-New X-Men uniform in full detail. Bobby makes use of the standard Minimate body with one sculpted addition: his hair. Now, here’s where things get interesting. Bobby’s hair is a re-use of the T2 Kyle Reese’s hair, but that’s not what’s in the pictures. Somehow, my Bobby ended up with a different piece. This one is from T2’s young John Connor. I’m not sure how it happened, but there it is. Both pieces are respectable hair pieces, though neither one is a direct match for Bobby’s hair in the comics. If I’m honest, I probably prefer the hair I got, so I don’t mind the mix-up. Bobby’s paint is pretty well done. It’s not as clean as Iceman’s, but it’s a bit more complex, so there’s that. The initial prototype for this figure was missing the black details on the shoulders, due to Bobby’s comic design being changed before print, but DST managed to get it fixed before the figures saw release. The coolest thing about Bobby is that the detail’s line up perfectly between him and Iceman, very nicely conveying that they are one and the same. Bobby includes an ice blast, a chunk of ice that a figure can be placed in, and a clear display stand. The ice blast is shared with the main Iceman, and the chunk of ice was originally seen with the Frozen Captain America from the CA: TTA set.  They too seem a bit yellowed, which is a shame.

SENTINEL(S)

The final figures in the set are the Sentinels. This marks the fourth version of the Sentinel in the line (not counting Nimrod, since he’s kind of a different thing). The Sentinel is a little over 2 ½ inches tall and sports 12 points of articulation. As is a common issue with the Sentinels in this line, he’s woefully out of scale, but that’s just a thing everyone has to live with. The Sentinel is a hybrid of multiple designs, with a leaning towards classic. The figure makes use of the basic Minimate body with sculpted add-ons for the helmet, upper torso, waist, gloves, and boots. The parts on this figure are 100% re-use. The helmet is from the Marvel vs Capcom 3 Sentinel, the hands are from the TRU exclusive Omega Red, the torso cover is from the TRU exclusive Extremis Iron Man, and the waist and boots are from the TRU Exclusive Box. These pieces are pretty well chosen, though the upper torso is just a bit too distinctive to Iron Man. The changed colors mean this isn’t too noticeable, but it’s there. The paint on the Sentinel is pretty good overall. The base colors are a bit more drab than what we saw on the DoFP Sentinel, but that’s not necessarily a bad thing. There’s a bit of slop on one of my Sentinels’ torso pieces, but nothing too distracting. The torso and waist feature full detailing, allowing you to remove the covers and display the Sentinel in a classic set-up if you so choose. The Sentinel includes two tendrils (courtesy of Omega Red), a blast off base (previously used on the Marvel vs Capcom 3 MODOK), and a clear display stand.

THE ME HALF OF THE EQUATION

Iceman and his corresponding Sentinel were purchased from my local comicbook store, Cosmic Comix, just like the other two sets. However, my store had already sold Bobby, so I had to order him through the always reliable Luke’s Toy Store. Iceman is the real star here, but Bobby and the Sentinel are still respectable ‘mates in their own right. Bobby is just slightly off from the source material (which is true even with the right hairpiece), and the Sentinel’s only real fault is that I don’t personally like it as much as the recent DOFP Sentinel. Still, this is a good set of figures, and the series as a whole is really a lot of fun.

#0359: Angel & Beast

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ANGEL & BEAST

MARVEL MINIMATES

It there’s one thing the X-Men are good at, it’s costume changes. As a team, they have to have the highest turnover rate in uniforms of any team in comics. Another thing that X-Men are big on is alternate versions of established team members running around. Combine those two, and you have a dynamite pitch for selling lots of toys of the same characters. This seems to be the case with the line-up of All-New X-Men, which has brought early versions of the original X-Men to the present, and given them a new set of threads along the way. Yesterday, I looked at Cyclops and Marvel Girl; today, I’ll be looking at Angel and Beast, both in their “pre-blue” forms.

THE FIGURES THEMSELVES

Angel and Beast are a two-pack from Series 59 of Marvel Minimates, which is based on the designs of the team as seen in recent issues of All-New X-Men.

ANGEL

Angel is a character that has kind of broken even on the whole “previous version” thing. The old Angel has certainly gone through his fair share of stuff, but his thing is mostly ping-ponging between being classic Angel and Archangel. I guess it’s not terrible to have a pre-ping-ponging version running around. The figure is about 2 ½ inches in height and he features 16 points of articulation, thanks to the wings. He’s based on All-New Angel’s second costume, which is a variant of the base costume everyone else got. His is accented with red, which serves as a nice callback to his Champions and X-Factor costumes. The figure features the basic Minimate body, with add-ons for his wings and hair. The wings are the same three-part piece we’ve seen on previous versions of Angel, and the hair was first used on Lost in Space’s Doctor Smith. The hair offers a nice “rich-boy” look, and the wings are a very definite case of “if it ain’t broke, don’t fix it.” Angel’s paint is generally a lot cleaner than what we saw in the Cyclops/Marvel Girl set. There are still a few sloppy areas with the base paint, but overall everything is pretty clean. I think the face looks perhaps a little too old for a younger Angel, but that’s really a personal thing. Angel includes a flight stand and a clear display stand.

BEAST

Beast seems like the one time-shifted X-Man who might work pretty well in conjunction with his modern day counterpart, but not as a replacement. They haven’t really screwed Beast up too bad, and most people like the few changes they’ve made to the character. Still, this reset version does serve as a pretty good counter point. Beast is a little over 2 ½ inches tall and features 12 points of articulation. Like the others in this series, Beast is in his second, Immomen-designed costume. Honestly, Beast’s is probably my least favorite of the five. The brown accents seem odd, almost like he got them because all the other colors were taken by the rest of the team. The brown/yellow, coupled with the goggles, kind of makes him look more like X-Men foe Mimic than Beast. Beast is built from the basic Minimate body, with add-ons to bulk up his torso, waist, shoulders, hands, thighs, and feet, as well as a goggle/hair combo. The hair and goggles piece is new, and it looks pretty spot in to what’s seen in the comic. The bulk up pieces have been seen on the Avengers movie Hulk (hands and feet), GotG’s Drax (torso), and countless other figures (everything else). I’m not sure I’m a fan of Beast being this bulky, but that’s gonna vary from person to person. Overall, Beast’s paintwork is pretty good. Mostly, the lines are clean. However, there is a random bit of brown paint on his goggles that very definitely shouldn’t be there. Beast includes a spare head/hair (with hair from Universal Monsters’ Henry Frankenstein) and a clear display stand. The extra head features a pair of glasses and a more reserved facial expression for Hank.

THE ME HALF OF THE EQUATION

Like Cyclops and Marvel Girl, Angel and Beast were picked up from my local comic book store Cosmic Comix. I hadn’t initially intended to get these two, but I wanted Cyclops and I liked the Icemen, so I figured I might as well complete the team. I still think this is the weakest set in the series, but they aren’t bad. Perhaps if Beast had costume detailing under the bulked up pieces, I’d enjoy him more, but I can’t fault Diamond for going that route. All in all, this set is good, but not great.

#0358: Cyclops & Marvel Girl

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CYCLOPS & MARVEL GIRL

MARVEL MINIMATES

The X-Men may not be the merchandise powerhouse they once were, but they still maintain a decent hold on the market. One of the things that makes old fans of the series love the team while simultaneously scaring away new fans is the sheer level of backstory involved. In an effort to help make the team a bit more approachable, Marvel has done an interesting move: they brought back the original X-Men. Yeah, the founding five have been brought forward in time, allowing for the series to present them in a more innocent, less complicated form. Diamond has decided to base their most recent series of Marvel Minimates on this incarnation of the team. Today, I’ll be looking at Cyclops and Marvel Girl.

THE FIGURES THEMSELVES

Cyclops and Marvel Girl were released as a two-pack in Series 59 of Marvel Minimates, which is based on the team as they’ve appeared in recent issues of All-New X-Men.

CYCLOPS

Perhaps the character to benefit the most from a “continuity reset” is the team’s leader Cyclops. Cyclops is a character who writers don’t really seem to know what to do with, resulting in a lot of questionable things being done with him in the last 20-30 years. Recently, a lot of those things have piled one, leading to the character coming off as a tremendous jerk and becoming essentially a villain. A Cyclops without all of these things is a breath of fresh air. Cyclops is about 2 ½ inches tall and features 14 points of articulation. He’s based on All-New Cyclops’s second costume, designed by Staurt Immomen. It matches the rest of the team without being too similar, and it’s all-around not a bad design. Cyclops is built on the traditional Minimate body, with an add-on for his hair/visor. This is an all new piece, and it does a pretty great job of capturing the design from the comic. The rest of the figure is reliant on paint. It’s not bad overall, but it could be better. The base paint is rather sloppy, especially on Scott’s visor. Fortunately, the detail lines are all nice and sharp, which helps to offset the questionable base paint. Cyclops includes two alternate hair pieces, one sans-visor(a re-use piece, seen on numerous figures) and one with his optic blast in full force. He also includes a standard clear display stand. The sans-visor hair is nice, as it allows for you to display the sunglasses painted under Scott’s visor, and the optic blast head makes for a lot of fun setups. I am hopeful that the optic blast piece is the new standard for Cyclops Minimates going forward.

MARVEL GIRL

Marvel Girl, aka Jean Grey, aka the Pheonix, aka the Song that doesn’t end, also benefited from the reset. Her present day counterpart is dead and all, plus now she just has the one code name, as opposed the 37 or so she had before. Marvel Girl is about 2 ½ inches in height and she sports 14 points of articulation. Like Scott, she is based on her second, Immomen-designed costume. I really like the green accents on hers; they really make her pop. The figure makes use of the base Minimate body, with the addition of a hairpiece. The piece is a re-use, first seeing use on The Spirit’s Sand Serif. It was also used on the first appearance Jean from a few years ago, so it’s a nice call back to see it here. I think it’s one of the nicer female hairpieces. The paint on Marvel Girl is similar to that of Cyclops: the base work is sloppy, but the detail lines are nice and sharp, which helps save the figure. I do wish the patterns on her legs were actually mirrors of each other, but they aren’t terrible. Marvel Girl includes a spare head/hair for a full “powered-up” effect (I’m gonna assume it has something to do with the Phoenix, but I haven’t read All-New X-Men, so I can’t confirm), a “jumping stand” and a clear display stand.

THE ME HALF OF THE EQUATION

Cyclops and Marvel Girl were picked up from my local comicbook store Cosmic Comix. Initially, this was the only set I had planned on getting from this series. I don’t read All-New X-Men, but I have been following Cyclops, which stars this version of the character. Ultimately, I ended up getting the rest of the series, but these two still remain my favorites. There are a few paint issues that could stand to be worked on, but other than that, this was a really strong set.

#0357: Young Magneto & Mystique

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

YOUNG MAGNETO & MYSTIQUE

MARVEL MINIMATES

 I realize as I write this review that I have made nary a mention of X-Men: Days of Future Past on this site. I guess that’s what happens when there is minimal merchandising for a movie. Well, there’s no time like the present. Simply put, Days of Future Past was the X-Men movie I’ve been waiting for since the very first X-Men movie was announced. It handled the characters brilliantly and had one of the best emotional through lines I’ve ever seen in a super hero movie. It was a very, very good movie. When it was first announced that the roles of Charles Xavier and Magneto were going to be recast for X-Men: First Class, I was hesitant. Patrick Stewart and Ian McKellen set the bar pretty high. However, James McAvoy and Michael Fassbender did an exceptional job filling those shoes. Fassbender in particular has become one of my favorite parts of the franchise, thanks to his wonderful performance as the younger Magneto. Today, I’ll be looking at the Minimates of Fassbender’s Magneto and Jennifer Lawrence’s Mystique.

THE FIGURES THEMSELVES

Young Magneto and Mystique were released as a two-pack in Series 58 of Marvel Minimates. Originally, Young Magneto was supposed to be packed with old Xavier and Mystique was supposed to be packed with old Magneto, but Diamond changed the pairings at the last minute. I find that this pairing makes more sense, as Magneto and Mystique’s conflict in the 70s is a major point in the film.

YOUNG MAGNETO

Magneto, as far as the movie goes, is actually the more minor character in this set. He still has a pretty substantial role, but he kind of takes a back seat to Charles and Raven during the movie’s climax. This is the second time we’ve seen Fassbender’s Magneto in Minimate form; the first was in the TRU exclusive series based on First Class. The figure is about 2 ½ inches tall and he features 14 points of articulation. Obviously, he’s based on Magneto from the 70s timeline, but more specifically he’s based on Magneto’s fully costumed look from the second half of the movie. It’s a slightly toned down version of the costume we saw him wearing at the end of First Class, and I think it’s one of the better costume designs we’ve seen in an X-Men movie. The figure makes use of the traditional Minimate body, with add-ons for his half-cape thing and his helmet. Both of these are new pieces, and they both look pretty good. I wish the helmet was just a tad smaller, but it looks pretty good, and it’s a pretty great replica of the helmet seen in the movie. I’m not sure what movie-verse Magneto’s obsession with half-capes is (he sports one in both timelines) but they’ve done a good job translating this one to the Minimate form. The figure’s paint work is all pretty great. Nothing is too sloppy and there’s no bleed over to speak of. The detail lines on the head, torso, and legs all look nice and sharp, and the head bears a pretty decent Fassbender likeness. Magneto includes an alternate hairpiece, a flight stand, and a clear display stand. Like the helmet, I feel the hair is just a bit too large, but it isn’t monumentally off.

MYSTIQUE

Mystique is arguably the lead character of Days of Future Past. She’s very definitely the most important character. It was nice to see her get some serious screen time, especially after she was essentially a bit player in the first three movies. Like Fassbender’s Magneto, this is the second time we’ve gotten Jennifer Lawrence’s Mystique in the Minimate form. And, as an added bonus, she works pretty well as a Rebecca Romijn Mystique too! The figure is about 2 ½ inches in height and she sports 14 points of articulation. Mystique’s pretty much just got the blue-scaly-naked look, so that’s the one they went with. Mystique is built on the usual Minimate body with the addition of a hairpiece. The piece is brand new to the figure, and it looks to be a pretty spot on recreation of Mystique’s hair in the movie. It has some very nice detail work, so that’s good. The rest of Mystique’s look is done with paint, so a good paint job is key. Fortunately, Diamond has delivered on that front. While it’s hard to mess up straight blue, they’ve also done a tremendous amount of detail work, all of which has turned out really well. What impresses me most are the eyes, which have way more detail than you’d expect at this scale. Mystique’s sole accessory is a clear display stand. It’s a bit of a letdown after the comic DOFP set did such a great job conveying Mystique’s powers with the accessories. A Trask head on par with the Senator Kelly head from that set really would have put this two pack over the bar.

THE ME HALF OF THE EQUATION

This set was purchased from my local comicbook store Cosmic Comix. I must admit I was a little underwhelmed by the Days of Future Past Minimates when I first saw them. Still, I enjoyed the movie, and they were still Minimates. Plus, I certainly wasn’t going to pass up a figure of the 70s Magneto design. I’m glad I decided to pick this set up, because these two are truly impressive. Mystique is a long needed figure, and Magneto may very well be one of my favorite Minimates.

#0353: Deadliest Foes of Spider-Man Minimates

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CARNAGE, DOCTOR OCTOPUS, LIZARD & SANDMAN

MARVEL MINIMATES

One of the greatest rogues galleries in comics is the Spider-Man rogues gallery. When you take into account that his main competition for that spot is Batman, a character that has been around for an extra 20 years, it’s a pretty impressive feat. With Minimates, getting Spider-Man’s rogues proved a bit tricky. Thanks to the multi-pack format, each spider-villain was bound to be packed with yet another variant of Spidey. However, Diamond has been getting more inventive with their sets, and just recently, they finally offered a set of Spider-Man villains with no Spider-Man included. Okay, it’s all figures with previous figures, but it’s the gesture that matters!

THE FIGURES TEMSELVES

This set was released in the title “Deadliest Foes of Spider-Man.” It was originally meant to be one of two exclusive sets carried by Action Figure Xpress, but they had to back out, leaving the sets in limbo. Minimate retailer Luke’s Toy Store stepped up and picked up this set as an exclusive to their store.

TENDRIL ATTACK CARNAGE

Carnage is the most recent character in this set, though he’s still over 20 years old, so I guess he’s still a “classic.” Generally, he’s not as well-known as Venom, the other Symbiote villain, but Venom has gotten his fair share of Minimates recently. The original Carnage Minimate from way back in Series 2 is generally considered to be one of the best of the early Minimates, so he’s definitely a tough act to follow. The figure is about 2 ½ inches tall and he features 14 points of articulation. Carnage has only ever had one basic look, so the figure unsurprisingly makes use of that look. He makes use of the basic Minimate body, with non-standard upper arms, a tendril add-on piece for the neck, a tendril hand, and an axe hand. The upper arms and neck piece were both previously seen on the “Venom: Through the Ages” Ann Weying. Since that figure was released, there’s been a campaign for those pieces to be used for Carnage, so it’s good to see that finally pan out. The hands are both brand-new, and they work pretty great for the character. I do kinda wish the tendril wasn’t quite as straight, but that’s a minor complaint. The big focus for Carnage is his paint. This was the strongest area of the very first Carnage, and I’m happy to say this one has surpassed him. The paint work on this figure is truly outstanding. Virtually every surface of the figure is covered in detail, which is not something you usually see on Minimates. Carnage includes an alternate Cletus Cassiday head (which re-uses the hair from Ghostbusters’ Janoz), an additional tendril hand, two claw hands, and a clear display stand.

ARM ATTACK DOCTOR OCTOPUS

Otto Octavius, aka Doctor Octopus, is probably the best known of the villains in this set. He’s also kinda dead right now, but his stint as the Superior Spider-Man just ended, so he’s still on everyone’s mind. The last proper Doc Ock Minimate was in the “Friends and Foes of Spider-Man” set from a few years ago. However, that set was riddled with horrible quality control, so Ock was in dire need of an update. The figure is about 2 ½ inches tall and features 18 points of articulation, courtesy of the extra arms. The figure is based on Ock’s classic green and yellow spandex look he sported throughout the 70s and 80s, which is the same look seen on both of his previous Minimates. The figure is built on the standard Minimate body, with additional pieces for his hair, torso, and his mechanical arms. These are all new pieces, and they are all really great for the character. The paint on Doc Ock is pretty good, though it could be a little better. The actual detail work is really great. Ock’s face is spot on for the character, and all the colors and such look just right. Unfortunately, the application of the yellow paint is rather sloppy, which is fairly distracting. It’s not enough to ruin the figure, but it is a little annoying. Doc Ock includes a spare set of lower arms which allow him to stand on them, and two display stands to facilitate this.

TRANSFORMING LIZARD

Curt Connors, aka The Lizard, is probably one of Spider-Man’s more tragic foes. He only becomes The Lizard due to his desire to grow back his missing right arm, and The Lizard is a personality entirely separate from his own. Curt Connors was a minor character in two of the Sam Rami Spider-Man movies, and The Lizard served as the primary antagonist in the first Amazing Spider-Man, so the character is certainly well enough known. He’s had one comic Minimate before, back in Series 37. That one was based on his design from his earlier appearances, whereas this one is meant to be based on his appearances in the 80s and 90s. The figure is about 2 ½ inches tall, and in his default set up, he has 12 points of articulation. The Lizard is built on the same Minimate base as the other two, but he features a different set of lower legs, as well as clawed hands, a lab coat, and a slip-over lizard head. The lower legs originally saw release on the Movie Lizard in Series 46, and the coat was originally used on the Series 37 Lizard. Near as I can tell, the head and hands are new. The reused pieces are sensible, though I’m not 100% sold on the lower legs. They seem a little off. The head is better than I thought it would be. Prototype pictures made it look far too large, but in person it looks about right. The paint work on the Lizard is pretty good overall. He doesn’t have any real issues with slop, but it would be nice if there was a little bit more detail on the head, especially on the teeth. The Lizard has the best accessories assortment in the set; he includes a hair piece (re-used from the “Captain America: Through the Ages” Armored Cap), a lab coat and an alternate half arm (both from the Amazing Spider-Man Doctor Connors), an extra hand, and spare legs, allowing him to be converted into a comic-styled Curt Connors. The parts are excellently chosen, and fully assembled he’s a spot-on Connors figure!

SHAPE-SHIFTER SANDMAN

Sandman is an early Spider-Man villain, but he’s had a more varied history than most. After fighting Spider-Man a few times, he joined up with the Fantastic Four villains The Frightful Four for a little while and then he even joined the Avengers, before once again returning to Spider-Man’s rogues gallery. Most notably, he was one of the villains in Spider-Man 3, which contributes a lot to his notoriety amongst the more casual fans. Sandman is no stranger to Minimates; he’s had two previous comic-styled Minimates and two Minimates based on his film appearance. The figure is about 2 ½ inches tall and features either 14 or 4 points of articulation, depending on how you set him up. He’s overall based on the character’s classic design, though I’m not 100% sure when he had the short sleeves. Right out of the box, the figure only makes use of the standard Minimate head and torso, with non-standard arms, and a sand base in place of his legs, as well as a sculpted hairpiece. The arms and sand base both were previously seen on the Series 18 Sandman, and the hair was first used on the Thunderbolts set’s Norman Osborn. The sand pieces work great, but I’m not sold on the hair. I didn’t particularly care for it on Norman, and I think it’s even less fitting on Sandman. It’s just too bulky to look right, especially in the back. The paint on Sandman is really great. All the base work is nice and clean, and the details are all really sharp. The face has just the right look for Sandman, which is great. Sandman includes spare arms and a regular lower half, allowing for him to be displayed as Flint Marko, as well as a clear display stand.

THE ME HALF OF THE EQUATION

Like yesterday’s “Days of Future Past” set, I picked this set up from Luke’s Toy Store. Not that it should be a shock, what with it being a LTS exclusive and all. I’ve been pretty excited for this set pretty much since day one. It’s a really great set, and it fulfills several needed figures. Lizard is definitely my favorite, with Carnage not far behind. Were the QC on Ock a little better, I’d probably like him more, but as is, he’s a good update to an essential character. Sandman is the weakest in the set, mostly due to him being the only one with no new pieces and his look being a little off. Still, he’s not a bad figure, so I can’t complain. All in all, this is one of the best sets of Minimates put out this year, and that’s really saying something. So, if you’re a Spider-Man fan or a Minimate fan, or just a fan of good toys, head on over to Luke’s Toy Store and pick this set up. It’s worth it!

(Holy crap, that was a long review.  I guess I had a lot to say…)

#0352: Days of Future Past Minimates

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

FUTURE WOLVERINE, FUTURE KITTY PRYDE, MYSTIQUE & FUTURE SENTINEL

MARVEL MINIMATES

Minimates! Oh, how I’ve missed you. It’s been almost 30 reviews since I last looked at a set of Minimates, and almost 50 since I last looked at any Marvel Minimates. I’m not sure how I let that happen. I guess I was just buying too much other stuff. So, here’s a set based on one of the best known X-Men stories of all time!

THE FIGURES THEMSELVES

This set was released as a San Diego Comic Con exclusive, just this summer. It’s based on the “Days of Future Past” story that ran through X-Men #141-142. The set was released to coincide with the movie adaptation of that story, released this past summer.

FUTURE WOLVERINE

It wouldn’t be a proper X-Men set without Wolverine, now would it? Wolverine is, as the figure’s name notes, based on the version of the character from the bad future presented in DOFP. This isn’t the first time we’ve seen this version of Wolverine in Minimate form, as it was also a variant all the way back in Marvel Minimates Series 13. However, a few things necessitate a re-do of this particular look: 1) The style of Minimates has changes since then, 2) This figure actually represents what wolverine looks like in the actual issue, while that one was based on the slightly different look from the cover, and 3) the old figure just isn’t very good. The figure is about 2 ½ inches tall and he has 14 points of articulation. He’s built on the basic Minimate body, with a set of clawed hands and additional pieces for his hair, coat, belt and the pouch on his leg. All of these pieces are re-use. The hair and hands have been used on a handful of previous Wolverines. Thecoat is from the Street Fight Wolverine from Series 52. The belt is a generic piece used several times before, and the pouch has been used before, but I don’t know where. Aside from the coat being a touch long for the one Wolverine was sporting in the story, all these pieces are spot on, and they do a great job translating the look to the Minimate form. For the most part, the paint on Wolverine is relatively basic, but it’s pretty good. There are a few areas on the coat and around the boot lines where the lines are a little sloppy, but otherwise it looks pretty great. The face and torso also have some very nice detail line work, which give the figures some pretty good dimension. Future Wolverine includes a clear display stand. 

FUTURE KITTY PRYDE

Okay, so right off the bat, I have a slight bone to pick with DST: In DOFP, Kitty isn’t Kitty Pryde, she’s Kate Pryde. It’s a small but important difference. That being said, I suppose for marketing purposes, it makes sense to call her Kitty. Anyway, she’s the main character of the comic version of the story, so it’s good to see her included here. She is, of course based on the future version of Kitty from the story. In her default setup, she’s meant to replicate Kate’s look from the cover of X-Men #141. Kate stands about 2 ½ inches tall and features 14 points of articulation. She’s built on the standard Minimate body, with additional pieces for her hair, collar, and coat. Like Wolverine, all of the pieces are re-use. The hair is from the Shadowcat Minimate from Series 31, the coat is from the Series 46 Peter Parker, and the collar is just a generic collar piece. These pieces make for a decent approximation of Kate’s cover look, which is good. The coat has a small hole on the right shoulder where Peter’s book bag originally attached, but it’s forgivable since it’s re-use. The paint on Kate is basic, but clean. The jacket, pants and shoes are all solid colors, but at least she doesn’t have any slop. The facial expression is a near perfect recreation of her face from the cover, so that’s great. Kitty includes a clear display stand, a spare hairpiece (re-used from Series 43’s Aunt May), and extra arms and legs. By removing the coat and replacing the arms and legs, you can recreate Kate’s prison camp look, which is the look she actually has in the story itself. It’s a masterfully done extra look and it’s absolutely spot on to what she looked like in the story.

MYSTIQUE

Mystique is the only “current” figure in the set. She’s a great choice, seeing as she operates as the main antagonist in all of the present day sequences, plus she was in dire need of an update. Mystique is in her classic costume, which is the one she was wearing in DOFP, so that’s cool. Mystique is about 2 ½ inches in height and features 14 points of articulation. Like the others, she features the standard Minimate body as her starting point, with add-ons for her hair and skirt. The hair is re-used from the “Curse of the Mutants” Vampire Jubilee and the skirt is from the Series 38 Elektra. These are both very nicely sculpted pieces, and they work great for Mystique. Mystique’s paint is very well done. Everyhing is clean and sharp, and the line work brilliantly translates Mystique from the page to the Minimate. There are even ties on her sides going from the front to the back of her dress! Mystique includes a clear display stand and two extra heads: one Senator Kelly and one half-Kelly/half-Mystique (both of which make use of the hair previously seen on the Lost in Space Minimates Doctor Smith). The heads are a great idea. The half-and-half head makes for a perfect illustration of Mystique’s abilities and with the addition of a spare suit body, the Kelly head allows you to make your own Senator Kelly, another character pivotal to the story. (For reference, I used the body of a Series 43 J Jonah Jameson, which I have several of thanks to SHIELD Agent army building.)

FUTURE SENTINEL

This particular Sentinel could work equally as a current day and future Sentinel, but the box says “Future” so that’s what I’m going with. The Sentinels are the antagonists of the future sequences, so the inclusion of one here is perfect. I just wish it were available outside of this four pack because I’d love to have a few of them. The Sentinel is based on the classic Sentinel design, as was seen in DOFP. The figure is a little over 2 ½ inches tall and features 12 points of articulation. The height puts him way out of scale with the rest of the set, but that’s just a thing we’ll have to live with. The Sentinel is built using the standard Minimate body, with add-ons for the helmet, hands, torso extender, and feet. The helmet first saw use on the Marvel vs Capcom 3 Sentinel, the hands are from the TRU exclusive Annihilus, the torso extender has seen a few uses, and the boots are from the TRU exclusive Box. All of these pieces add up to the best looking Sentinel the line has offered yet. The paint on the Sentinel seems particularly good. All of the details are very shard and clean, and the shades of purple and pink are just right, which was something I always found off about the previous Sentinels. The Sentinel includes an alternate battle-damaged head, an orange flight base, and a clear display stand.

THE ME HALF OF THE EQUATION

Since I did not attend San Diego Comic Con, this set was picked up from my very favorite Minimate retailer, Luke’s Toy Store. When Diamond first announced they were planning on doing a set based on the story, I was pretty excited, and this set really lives up to my expectations. Mystique and the Sentinel are easily my default versions of those characters now, and Wolverine and Kate are fun variants. Throw in the fact that I can build my very own Senator Kelly, who I never though in a million years we’d get, and I’m as happy as I could be with this set.

#0336: Marvel’s Wonder Man

Posted by Ethan Wilson in Reviews and tagged with , , , ,

MARVEL’S WONDER MAN

AVENGERS INFINITE

WonderManAI1

Is a rather commonly known fact that death in comics is far from a permanent thing. Characters die and come back at the drop of a hat. In some cases, the same character will do this several times. The usual go to example of such a character is Jean Grey, but in reality Jean’s only actually died and come back once. A great example is Simon Williams, aka Wonder Man (or Marvel’s Wonder Man, as the packaging would lead you to believe), a character who has died and returned no less than three times, which is actually impressive for a character who is relatively minor. When Kurt Busiek brough Simon back to life from his second death, he was given an extra set of “Ionic Powers” which manifested as a cool new energy look, just ripe for the toy form! This look was recently brought into toy form for the second time in Hasbro’s Avengers Infinite line.

THE FIGURE ITSELF

WonderManAI3Wonder Man was released as part of the fourth series of Avengers Infinite. He is the only actual Avenger in the line-up, so I guess he’s just there to maintain the name. The figure is about 4 inches in height and features 22 points of articulation. As mentioned in the intro, he’s based on the Ionic version of the character, which is what he looks like when he’s directly channeling his Ionic powers. Essentially, what this boils down to is that he’s a basic Wonder Man molded in a translucent blue/purple plastic. The figure is, head-to-toe, a complete re-use of the previous Wonder Man, released in the Marvel Universe line. Since I haven’t reviewed that figure yet, I may as well talk about the sculpt here. He makes use of the basic “larger male” buck that Hasbro used on the Wrecking Crew and the like, with the addition of a new head, plus wrist band and belt add-ons to make the figure more Wonder Man-specific. The body is one of the better base bodies that the MU line had to offer, and it’s a pretty good fit for Wonder Man. The head is a pretty great piece, and it captures Wonder Man’s personality pretty well. Technically, the belt and wrist bands aren’t accurate to the look, as they aren’t visible in his Ionic form, and they are even absent on all of the prototype shots, but here they are on the final figure. It’s hard to be mad at them for including extra pieces, but it does seem odd that they’d make use of unnecessary pieces. The figure features minimal paint, with details only for his eyes and logo. The eyes are clean, but the logo shows some pretty bad slop, especially on the shoulders. Wonder Man includes no accessories, but I can’t really think of anything he would need. Maybe a stand? Or a pointless missile launcher!

THE ME HALF OF THE EQUATION

Kurt Busiek’s run on Avengers began just as I was starting to read comics on my own. I knew most of the characters already, but I didn’t know Wonder Man until Busiek brought him back. He quickly became one of my favorite Avengers, and in the last 20 years, I’ve managed to acquire every single figure of him. Okay, so there are only eight of them, but it’s still a thing. The MU version was my favorite version of the character for a while, so I certainly don’t mind having another figure built from the same pieces. Plus, he’s got that whole translucent plastic going for him, which is always cool! All in all, he’s a pretty cool figure, and he’s helped by the fact that he’s really the only new figure in series four.

WonderManAI4

#0318: The Thing – 1st Appearance

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

THE THING – 1ST APPEARANCE

MARVEL LEGENDS

Thing1st1

Following Toybiz’s venture into the 6-inch scale with Spider-Man Classics, they quickly launched a more general series of figures based on the larger Marvel universe, dubbed Marvel Legends. The Thing initially appeared in the second series of the line, but that figure suffered from slightly odd proportions, and was before Toybiz had quite figured out how to articulate larger characters. Once they got into the swing of things, they saw fit to give the Thing a second shot! Let’s see how that turned out!

THE FIGURE ITSELF

Thing1stWilsonThe Thing was released as part of the Legendary Riders series of Toybiz’s Marvel Legends, which was the 11th series of the line. He’s just over 6 inches in height and features 36 points of articulation. The Thing has been dubbed 1st Appearance, though he’s better described as “early appearance.” He’s based on Jack Kirby’s early renditions of Ben, prior to the character taking on his more widely known rocky appearance. Interesting tidbit about the figure: while he’s based on Jack Kirby’s work, he was actually designed by prominent artist Art Adams, who did a fair bit of Toybiz around the time. The Thing features a completely unique sculpt. It’s one of Toybiz’s better sculpts from this line, and it’s actually aged pretty well, which is more than can be said for the majority of Marvel Legends. Ben has a truly unique build that sets him apart from the rest of the line, and the figure is really nicely detailed. It’s not all perfect, though. The feet are a little on the flat side, looking not unlike flippers, and the scale pattern on the upper torso is just a little too regular, which makes it look just a bit off. The Thing features pretty top-quality paintwork. He’s been molded in orange, with several different accents added to bring out the sculpt. It’s pretty great and really makes the figure’s sculpt pop. The theme of the “Legendary Riders” series was each figure included a vehicle of some sort. A lot of these vehicles were rather forced, but Ben’s wasn’t too bad. He comes with his hover cycle, which he was known to ride around on from time to time. The cycle come packaged in six pieces, and is pretty easily put together. In addition, Thing includes a reprint on Fantastic Four #1 and a Thing card from the VS System card game.

THE ME HALF OF THE EQUATION

The Thing is a figure I passed on at the time of initial release. I’m not sure why, if I’m honest.  I’ve always liked Ben, and this is a pretty great figure of him. Regardless, I ended up picking him up from my local comicbook store, Cosmic Comix, a few weeks ago when they purchased someone’s Marvel Legends collection. He was only $10, which is a great price for a figure in this scale nowadays. I’m glad I finally got the figure, and he may well be my favorite version of the character in this scale.

Thing1st2

#0311: Marvel’s Cyclops

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

MARVEL’S CYCLOPS

MARVEL LEGENDS INFINITE SERIES

CyclopsNow1

Ever since I first got into the marvelous mutants of the X-Men, I’ve been a pretty big fan of Cyclops. Well, the idea of Cyclops, I suppose. His powers are cool, and he’s been graced with some of the cooler costume designs in comics. In the 90s, every X-Man got a figure, and Cyclops even got several. They were of varying quality, but I had just about all of them, and I loved them all. When Marvel figures moved to the 6-inch scale with Marvel Legends, I patiently awaited that awesome figure that would live up to my expectations of good ol’ one-eye. Sadly, while Toybiz did eventually produce a Cyclops, it was far from what I’d hoped. Cyclops made a few more appearances in the Marvel Legends style, but none of them did much for me. I recently picked up my first Cyclops figure in what feels like forever, courtesy of Hasbro’s Marvel Legends Infinite Series.

THE FIGURE ITSELF

CyclopsNowWilsonThis version of Cyclops was released in the recent X-Men themed series of Marvel Legends Infinite Series. The series is done to loosely tie-in with Days of Future Past, and it is exclusive to Toys R Us. Cyclops stands a little over 6 inches tall and features 32 points of articulation. He’s based on the character’s “Marvel Now!” look. Well, one of them anyway. There are currently two versions of Scott Summers running around the Marvel universe. This one’s the older one. He’s all surly. According to the back of the box, Scott has lost control of his powers. Well, more so than before, I guess. What that means design-wise is that instead of the traditional visor we’ve all grown accustomed to, Scott now has a big red “X” on his face. Yay comics! Cyclops is built on Hasbro’s new standard male buck, used on figures such as Boomerang and Zemo. It’s a pretty decent, medium-build type body that works for a lot of characters, so that’s cool. Scott also has a pair of fists stolen from the recent Nova figure, as well as an all-new head sculpt and belt add-on. The head is actually a very nice sculpt. The X-visor has been etched in place, and Scott’s been given a facial expression that befits his older, surlier self. The belt is a basic belt with pouches, but it’s well sculpted, so that’s cool. It’s generic enough that I could see Hasbro putting it to use elsewhere. The rest of Scott’s details are handled via paint. The figure is CyclopsNow2molded in black, with red, orange, and flesh-tone paint providing the various details. The paint is fairly cleanly applied, but it’s not perfect. The red lines on his costume are pretty good, but his visor’s a bit of a mess. It seems like the paint didn’t want to stay in the lines. In addition, the “x” on Scott’s belt is off center, once again failing to follow the sculpted line work. Still, this isn’t as bad as some Hasbro efforts, and the figure does end up looking better as a whole. Cyclops’s only accessory is the arm to this Series’ Build-A-Figure, Jubilee. I don’t know why, but for some reason this BaF figure piece seems more morbid tan previous ones.

THE ME HALF OF THE EQUATION

In all honesty, I was not a fan of this Cyclops design when it was first revealed. But, as other artists (read: NOT Joe Quesada) started to draw it, I actually kind of warmed up to it a bit. It’s one of those rare modern costumes that doesn’t suffer from being too over-designed. So, when this series of Marvel Legends was announced, I was a little bit interested in the figure, but I wasn’t 100% sold.

The other day, I had a rough day at work, and decided to stop by my local TRU, just to see what they had. I found the remnants of a case of this series. All that was left were two Wolverines and this guy. In person, I was even more impressed with the costume’s design, and so I decided, what the heck, I’ll go for it. To be honest, he’s probably the best Marvel Legends version of Scott produced. Also, now I kinda want to finish Jubilee, but that means I’ll have to buy a Stryfe figure. I’m not sure I’m ready for that…

CyclopsNow3ALT

#0310: Daredevil – Yellow

Posted by Ethan Wilson in Reviews and tagged with , , , ,

DAREDEVIL – YELLOW

SPIDER-MAN CLASSICS

YellowDareDevil1

In the 90s, Toybiz was king of the toy aisles with their expansive selection of action figures based on characters from the Marvel Universe. Eventually, opinions and expectations of toys began to change. Toybiz wanted to stay at the top, so they changed with the times. In an effort to tie into the hype of the character’s first foray onto the big screen, Toybiz launched Spider-Man Classics, a line that upped the scale, the detail, and the articulation. The second series of the line introduced not only an outreach to other corners of the Marvel universe with the character Daredevil, but also the very first instance of something that would become a staple of future Toybiz lines: the Variant. A slight change to one of the figures in the series, packed at one to a case. The figure immediately caught collector, and scalper, attention and its price sky-rocketed on the aftermarket. What was this figure everyone had to have? Yellow Daredevil!

THE FIGURE ITSELF

YellowDaredevilWilsonDaredevil was released in the second series of Spider-Man Classics. This figure is the variant of the regular Daredevil, dubbed “Yellow Daredevil” because it’s based on Daredevil’s first appearance costume, which was predominantly yellow. The figure is 6 inches tall and sports 30 points of articulation, a point that is proudly boasted on the figure’s packaging. Daredevil’s sculpt makes use of the basic body sculpt of Black Spider-Man from the first series, with a new head, hands, feet, as well as an add-on for his billy-club holster. The sculpt hasn’t aged all that well. The body is long and lanky, and the hands and feet are a bit on the large side. For the time, it was pretty impressive, though. The head sculpt is one piece that still manages to look pretty good. It’s a bit exaggerated, but it works. I will admit I also really like the sculpted tread around the bottom of his feet. It does a lot to make the figure stand out from the Black Spider-Man it was based on. Daredevil’s paint is a bit of a mixed bag. There’s some great detail work, and they’ve done some cool things to make the design pop. I do like the slight occurrences of red on the black areas, which is a nice way of paying tribute to the red highlights he was often seen with. However, the figure shows quite a bit of slop, uneven paint application, and a few very fuzzy lines. These aren’t immediately apparent, but do crop up with a tiny bit of examination. It becomes a bit more forgivable when you remember these figures had a retail of $7. Daredevil includes his billy-club, a wall mountable display stand that looks like a stained glass window, and a copy of Daredevil #241.

YellowDareDevil2 YellowDaredevil3

THE ME HALF OF THE EQUATION

The Yellow Daredevil figure has for quite some time been one of my personal grails. For whatever reason, I’ve always been fascinated with the design. When word of this figure first broke out, I was eager to get one. In fact, my Dad made it his mission to try and find me one. Sadly, we were never able to find one on the shelves. As the original “variant figure” the figure maintained a hefty value on the aftermarket. More than once I picked one up at a convention, only to be told the price (usually well over $100), which would lead to do the “back away slowly” move. Years passed and I pretty much gave up. Instead, I resigned to just get every other figure of Yellow Daredevil (which incidentally led to my getting into Minimates, but that’s a story for another time). A few weeks ago, my local comicbook store Cosmic Comix posted on their site that they had gotten in a pretty large collection of figures, and they would be selling them for a set price. I got there to pick up my comics and looked over the table of figures. I found one or two, but nothing really jumped out at me. I walked up to the counter and the owner, who knows I’m a big action figure collector, asked if I’d like to look at the more expensive figures before they were officially priced. This is a scary idea for me, but I figured it wouldn’t hurt to look. I moved one figure from the top of the stack, and there was Yellow Daredevil. As it turns out, he’s actually gone down a bit in price in the last few years. On top of that, the owner agreed to cut me a pretty great deal. So, I got the figure I’ve been trying to find for 13 years, and I got him for a pretty reasonable price. Is he the perfect figure? No. There’s some definite flaws. But, to me, he’s more than just a figure, he’s an accomplishment.  After all that time, I’m just glad to finally have this figure.

And yes, I took him out of the box. Deal.