Tag Archives: Star Wars

#0693: Finn (Jakku)

Posted by Ethan Wilson in Reviews and tagged with , , ,

FINN (JAKKU)

STAR WARS: THE BLACK SERIES

FinnTBS1

If you thought I was done reviewing figures of Star Wars characters I know nothing about, you were sadly mistaken. See, I’ve looked at all the 3 ¾ inch figures I’ve picked up, but, ah, I still have the Black Series figures to look at, don’t I? So, that’ll be the next four days of reviews. Let’s kick things off by taking another look at Finn!

THE FIGURE ITSELF

FinnTBS2Finn is part of what is technically the 10th series of Star Wars: The Black Series figures. Hasbro has once again re-numbered, making him #01. To their credit, The Force Awakens serves as a re-launch of all their stuff and the packaging’s been changed up too, so this feels more like a genuine re-starting of the line than the previous re-numbering. The figure stands 6 inches tall and has 23 points of articulation. The articulation scheme is pretty good here; in fact, he may well have the best movement of any of the Awakens figures. The elbows do seem a bit too restricted, but the forward/back movement on his right wrist helps compensate for this a bit. The ankle movement is notable in that it’s the smoothest movement I’ve seen on a Hasbro figure in some time. Finn gets an all-new sculpt for this figure. He is once again presented in his “Jakku” gear, lending credence to this being the character’s primary look in the film. It’s not the most exciting design ever, but the jacket’s pretty cool and he’s not far out of line from the franchise’s previous stars. The sculpt does a pretty good job of keeping the figure from being too boring. The jacket is once again given a very wrinkled, worn-in sort of look, which adds to the character. The rest of his outfit is similarly textured. The shirt in particular exhibits some very nice pattern work, which was present on the smaller figure, but was much easier to miss. The head exhibits some pretty decent work. The likeness is passable; it’s not spot on, but you can see who it’s supposed to be. The detail, especially on the hair, is very well handled, and adds a lot of depth to the figure. I don’t often touch on this in reviews, but the plastic quality on this figure feels sturdier than the last few series of SWBS, especially on the joints. It’s a minor change, but it makes a world of difference when posing the figure. The paintwork on the figure is mostly straightforward; there’s some fairly basic color work, all of which is handled pretty cleanly. There’s just a bit of extra detailing at the bottoms of his legs, which makes it look like he’s been wandering around through a sandy place. It’s a small touch, but it works pretty well. Finn’s only accessory is a blaster, which looks to be the same style as the one included with the smaller figure. It’s not my favorite design, but it’s rendered well here, and the paint is very nicely handled.

THE ME HALF OF THE EQUATION

After striking out at Toys R Us, and only finding a small selection of Black Series figures at the Target at which I stopped, I came across Finn at the Walmart across the street from the Target. So there. The Black Series figures were the items I was most interested in from Force Friday, so I was definitely glad to find them. Finn’s 3 ¾ inch figure wasn’t bad, but I think he’s better served by this figure, which just offers a lot more fun. That said, he does feel a little light for the price, especially in comparison to the others in this set. Hasbro might need to do some re-assessing of the pricing of these guys if they want the line to succeed.

#0692: Rey (Starkiller Base)

Posted by Ethan Wilson in Reviews and tagged with , , ,

REY (STARKILLER BASE)

STAR WARS: THE FORCE AWAKENS

Rey1

Coming up with intros for characters you don’t actually know anything about isn’t the easiest thing in the world, if I’m being completely honest. And yet, here I am, doing it for the third day in a row. Today, I’ll be looking at the third member of the Star Wars universe’s new “power trio.” Ummm…so, her name is Rey, and she’s a scavenger from the planet Jakku. There’s what I know about her. I also know she has two action figures, and I’ll be looking at the first of those in this review.

THE FIGURE ITSELF

Rey2Rey is part of the first assortment of Hasbro’s 3 ¾ inch Star Wars: The Force Awakens figures. She’s from the “arctic” subset of figures. Like Finn, she’s one of the lower price-point figures, and I still can’t figure out exactly how that pricing works out, but, whatever. Rey is just shy of 3 ¾ inches tall and has (can you guess how many?) 5, count ‘em, 5 points of articulation. Officially, the figure is listed as being the “Starkiller Base*” version, so I think it’s safe to say this is what she’ll be wearing in that location. With that said, this appears to be the look she’ll be sporting for at least most of the movie, going by what we’ve seen. Rey has an all-new sculpt, and it’s pretty decent over all. She does seem just a bit frail, but her proportions seem pretty close to what they should be. The detail on the clothes is good, but somewhat on the inconsistent side; the torso has much finer detail on the texturing and folds than the legs do. Also, the hip articulation is definitely worked in very awkwardly and obviously. It’s not far removed from how robed characters were handled in the vintage line, but it looks clunky nowadays and the design would have been far better served by an overlay piece of some sort. The feet are somewhat pidgeon-toed, which makes her a little hard to stand and looks a little Rey3unnatural. The likeness on the head sculpt doesn’t seem quite as close as what we saw on Finn and Poe. I suppose there’s a little of Daisy Ridley in there, but when I look at the figure, all I can see is Kiera Knightley. Paint-wise, the figure makes out well enough. Paint is once again pretty sparse, but what’s there is fairly well applied. It’s rather hard to tell, but she does actually have two different tones to the over and underlying portions of the robes, which is a nice touch. She also has the cleanest hairline of the three figures I’ve looked at so far. Rey is packed with a staff, backpack, and another weird build-a…..thing. I wish she could hold the staff a little better and the random piece of whatever is still somewhat confusing, but it’s a nice enough accessory compliment.

THE ME HALF OF THE EQUATION

Rey was the third and final of the 3 ¾ inch figures I picked up at Target on my second go at the Force Friday thing. It’s yet another character I don’t really have a lot of knowledge about, but she’s at the very least pretty cool looking. Unfortunately, she ended up being the weakest of the 3 ¾ inchers I’ve picked up so far, which was somewhat disappointing. She isn’t terrible or anything, and perhaps I’ll like her more after seeing the movie. All in all, the 3 ¾ inch figures aren’t without issue, but they do feel like an improvement on the earlier 5 POA figures.

*For the record, I think it’s a pretty cool touch using Luke’s original last name for the name of the base. That attention to the mythos’ beginnings makes me at least a little more hopeful about how the film will turn out.

Rey4

#0691: Finn (Jakku)

Posted by Ethan Wilson in Reviews and tagged with , , ,

FINN (JAKKU)

STAR WARS: THE FORCE AWAKENS

Finn1

Alright, I’ve played it nice and safe on the last two Force Awakens reviews. Not anymore. Are you guys ready for the controversy? Probably not. I mean, I know I’m not. So, yeah, today we’ll be taking a look at Finn, another member of the new “power trio.” He’s also the very first new character we saw, way back in the first teaser trailer. And boy did some people make a big deal out of him. Why was he the first person we saw? Why was he in Stormtrooper armor? Me? I’m just really, really hoping he doesn’t turn out to be related in any way to Lando or Mace. It’s a simple hope really. Let’s just look at the figure already!

THE FIGURE ITSELF

Finn3Finn is one of the first assortment of 3 ¾ inch Star Wars: The Force Awakens figures. The line is divided into a few sub-sets, and Finn is from the “Lava” themed set, so…yeah, there’s that. He’s one of the lower price point figures, and, if I’m honest, I really can’t figure out why. The figure is, unsurprisingly, 3 ¾ inches tall and he has the usual 5 points of articulation. Finn’s presented here in a more casual set of clothes than the Stormtrooper armor uniform in which we first saw him. It’s actually pretty similar to what Poe was wearing. At the very least the jackets are the same, though whether it’s actually the same jacket or just a shared uniform piece is yet to be seen. This is the look that all of the Finn figures are sporting, so I’d say it’s safe to assume it’s his main look from the film. He gets an all-new sculpt, which is pretty impressive, because, as I said, the jacket’s the same as the one Poe was wearing. However, rather than just re-use the parts, Hasbro’s actually used this common piece of clothing to add some extra character to the two. Finn’s jacket is much more worn and wrinkled than Poe’s, which is handled very convincingly. The rest of Finn’s sculpt is pretty decently handled, too. The proportions of the body are pretty well balanced, and the head sports a pretty decent likeness of actor John Boyega. Perhaps the only negative thing about the sculpt is that Finn2legs are sculpted with a slight step to them, which makes it a little difficult to keep him standing. The paintwork here is pretty similar to that of Poe. There’s not a ton of detail, but what’s there is pretty clean. On the plus side, the paint on Finn’s face is much better handled, which is encouraging to see. Finn is packed with two accessories: a gun and a…thing. The gun is fine, though he has some trouble holding it. The other thing, though. I really don’t know what it is. It might be a backpack, or a gun thing. All I know is it combines with the parts from the other figures in the “lava” set, allowing you to build a…larger thing.

THE ME HALF OF THE EQUATION

Finn was one of the figures I picked up from Target on my way down to visit Super Awesome Girlfriend last weekend. I don’t know a whole lot about the guy, but he looks to be pretty important. As a plus, the figure’s pretty well done on too!

#0690: Poe Dameron

Posted by Ethan Wilson in Reviews and tagged with , , ,

POE DAMERON

STAR WARS: THE FORCE AWAKENS

PoeDam1

I’m in a bit of Star Wars mood. I’m sure none of my readers have the slightest idea as to why that might be. Certainly, it can’t have anything to do with a little thing called Force Friday, could it? I can neither confirm nor deny. Well, after a bit of a disappointing start at Toys R Us, my Force Friday experience worked out alright in the end, resulting in a nice little hall of figures, mixed between the two main scales. I figure I’ll be true to the franchise and kick things off with a look at the 3 ¾ inch figures, starting with my man Poe here. Poe, for those of you unaware, is one of Force Awakens’ new characters, and by all accounts he’s set to be part of the new “power trio” of characters.

THE FIGURE ITSELF

PoeDam2Poe Dameron is part of the first assortment of 3 ¾ inch The Force Awakens figures. There are a few different sub-assortments so far, with some slightly different themes. Poe is part of the “Armor Up” set, which are a set of slightly more expensive figures, which feature armor pieces. He’s one of the two 3 ¾ inch Poe figures available (three if you count the one included with the X-Wing.) He’s the only of the three figures not to be based on Poe in his flight gear look, instead presenting him in what appear to be Rebel fatigues. I have no idea which look will end up being the more prominent in the film, but I liked this one. The figure stands 3 ¾ inches tall and has the now standard 5 points of articulation. The articulation is disappointing, but I won’t continue to harp on it. Poe features an all-new sculpt; it’s not bad. The body is nicely proportioned, and the detail work on his clothing is quite intricate. You can even make out all the different types of seams and pockets on his jacket, which is pretty cool. The likeness on the head isn’t spot-on, but it bears more than a passing resemblance to actor Oscar Isaac, which is pretty good at this scale. As far as paint goes, there’s not a ton of it. Most of the plastic is molded in the proper colors. There’s a bit of detailing on the jacket, as well as the belt and the boots. Most of the application is decent, if a little bit sloppy. The head is okay, but the hairline is definitely a little off and they missed his sideburns almost entirely. This was actually the better of the two figures I saw; the other was missing a fair portion of the front of his hair. Poe is packed with a blaster rifle, which has an impressive amount of detail for the scale (Tim was even able to identify the real gun it was built on and what mods were made), as well as the somewhat gimmicky armor piece. It’s some sort of helmet/chestplate/jetpack combo, which I have a sneaking suspicion won’t be showing up in the movie. I do wish the helmet were a separate piece, since it actually looks to be somewhat accurate.

THE ME HALF OF THE EQUATION

So, clearly, I didn’t get Poe from my late night Toys R Us run. I was bummed about not getting much at the 12:01 opening, so, while on my way to visit Super Awesome Girlfriend for Labor Day weekend, I decided to stop by a few other stores. The first was a Target, where I found Poe and a handful of other 3 ¾ inch figures. I like this figure a lot, actually. I know next nothing about the character, but he intrigues me for whatever reason, and, aside from the articulation issues, this is a well done figure.

#0689: Stormtrooper Commando & Attack Walker

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

STORMTROOPER COMMANDO & ASSAULT WALKER

STAR WARS: THE FORCE AWAKENS

Trooper&Walker1

Behold! The Star Wars stuff! Here it is! Do you see it? There’s a ton of it! Go, look! I’ll wait. Did you see it? Isn’t there a lot of Star Wars stuff? Man, I gotta be honest, it’s a relief to see it all. The last few months, stores have been almost completely devoid of all things Star Wars toys, and it was getting just a little bit depressing. But now, the Episode 7 stuff has finally hit, and now all the die-hard fans are up for another round of “buy all these figures before seeing the movie they’re from and just really hope they’re worth it to you after the fact.” It’s a long name for a thing. So, what was my first Force Awakens purchase? Well, I played it safe and went for a Stormtrooper. Of course, I couldn’t find just a basic Stormtrooper, so I had to settle for this one included with a vehicle.

THE FIGURE ITSELF

Trooper&Walker2The included figure is the Stormtrooper Commando, a variation on the all-new First Order Stormtrooper design. Essentially, it’s just the basic Stormtrooper with a shoulder pauldron. The figure stands 3 ¾ inches tall and has 5 points of articulation. It’s still kind of sad to see Hasbro cut articulation so drastically, but I’ve gotten enough of the reduced articulation figures that it’s begun to bother me less. The sculpt is pretty decently handled. The First Order Stormtrooper is an interesting re-design of the basic Stormtrooper we’ve all come to know and love, with a heavy emphasis on making them look as sleek as possible. The armor is a lot more smooth and rounded then what we’ve seen before. It’s definitely an interesting look. The sculpt does a nice job translating the new design to the small scale. While it’s not the most intricate design ever, there are some finer details, which are handled with nice precision, making the armor look appropriately clean. The right leg has a raised up section, with a small slot, meant for holding the figure’s weapon, which is a nice improvement over previous troopers. The Trooper&Walker3pauldron, which is the main unique piece here, is a rather straightforward add-on piece. It slips over the neck joint and can easily be removed by popping off the head. As far as paint goes, the Stormtrooper Commando is pretty basic. He’s molded in white plastic, and has black paint for detailing. That’s it. Now, to be fair, that looks to be accurate to the film, so it’s not like Hasbro’s skimped out on any additional colors or anything. The actual application of the paint is decent but nothing fantastic. None of the paint is drastically out of place, but the black is all pretty fuzzy around the edges, and a few of the smaller areas are missing their black detailing all together. None of it is quite as obvious as the missing shoulder paint from the Rebels Stormtrooper, but it’s still a minor annoyance. The pauldron is molded in straight black. I have no idea if that’s accurate to the movie, but it looks decent enough. The Stormtrooper includes a blaster, which looks to be their standard blaster for the film. It’s pretty well sculpted and nicely painted. I dig the two-toned thing. It sits a little odd in his hand, but it plugs into the side of his leg pretty securely.

THE VEHICLE ITSELF

Trooper&Walker4The main selling point of this set is the vehicle here, dubbed the Assault Walker. It appears to be a variant of the AT-ST “Chicken Walker” from Return of the Jedi, though, at this size, I guess it’s more patterned after the smaller walkers we saw in Clone Wars and Revenge of the Sith. It stands roughly 7 inches tall and has articulation at the tops of the legs, the ankles, the mounted gun on the front, and the handle bars. That’s not a whole lot of movement, and it would have at the very least been nice to get joints at all the sculpted joints on the legs, but what’s there is serviceable. The sculpt on the walker is pretty impressively handled. Sure, it’s not Hot Toys level of detail or anything, but it’s got a nice, geometric build, with a fair amount of seam lines and visible mechanics to keep it Trooper&Walker5interesting visually. There’s a lot of hollow areas to keep the vehicle low weight, so it looks better from some angles than it does others. That’s not ideal, but it’s also not terrible, and it’s not like it’s out of line from previous Star Wars vehicles. Paintwork on the walker is relatively minimal, with most of the color work being handled through molded colors. That said, there are a few areas that have some painted details, all of which are handled relatively cleanly. The best work is definitely on the front shield piece, which has a nicely executed camo pattern. The Assault Walker doesn’t have any accessories, though, if you really want to get technical, the Stormtrooper Commando is an accessory.

THE ME HALF OF THE EQUATION

After missing out on the midnight releases of all the Star Wars prequel toys, I decided to go to this year’s “Force Friday” event. I went to Toys R Us, mostly due to none of my local Targets or Walmarts participating in the 12:01 openings. I got there about 45 minutes before midnight and got a fairly decent spot in line. Then I went in. “Underwhelming” is the word I’d say best describes he experience. TRU’s distribution completely misidentified the target audience, resulting in far too few action figures to satisfy demand. I had been wanting to grab a few of the Black Series figures, but only one case was sent to the store, and every figure in it was grabbed by the first person in line. In my search for the Black Series stuff, I walked past the 3 ¾ inch-ers, and by the time I got back to them, they were all but gone. I picked up this set to look at it, and next thing I knew, every other set around it was gone. So, I clung tight to this set, as well as the lone Pop! figure I had managed to grab and called that a small victory. This is actually a pretty fun little set. The Walker is a neat vehicle that doesn’t take up too much space, and the Stormtrooper Commando is a good enough stand-in for a basic Stormtrooper to make me happy. So, I guess the trip wasn’t a total loss.

Trooper&Walker6

#0672: Bounty Hunter Chewbacca

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BOUNTY HUNTER CHEWBACCA

STAR WARS: POWER OF THE FORCE II

ChewieBountyHunter1

My first introduction to Star Wars toys was courtesy of Kenner’s Power of the Force II line of figures. The interesting thing is that I came into the line during the second round of figures, so some of my initial versions of the main characters weren’t exactly standard issue. I’ve already discussed how Dagobah training Luke was my first figure in the line, and some of the other main characters followed a similar pattern. Chewbacca was one such character, which seems a little odd, since you wouldn’t think there would be a lot of potential Chewbacca variants. Well, faithful reader, feast your eyes on Bounty Hunter Chewbacca!

THE FIGURE ITSELF

ChewieBountyHunter2Bounty Hunter Chewbacca was part of the second year of Power of the Force II figures. He was released as part of a small subset of figures based on Shadows of the Empire, which is a story set between Empire and Jedi. In the story, Chewbacca has to take on the guise of well-known Wookie bounty hunter Snoova in order to infiltrate Imperial City. So, technically, this figure could pass for either character. This is only the third time that Chewbacca had made it into the 3 ¾ inch line, which is surprisingly low, given his prominence. The figure stands a little over 4 inches tall and has 6 points of articulation. As a Chewbacca variant, you might think that this figure would be heavy on reuse. However, that’s not the case, as the only shared part between this and the regular POTF2 Chewie is the left leg. Everything else is new to this guy, though the sculpt maintains more than a few similarities with the regular version. Chewbacca definitely has a slightly exaggerated style about him (as did most of the POTFII figures) but I think this is one of the few figures in the line that really couldn’t work without the slightly cartoony feel. The concept looks pretty nifty here, presented in all its over-complicated 90s glory, but placed on a more realistically proportioned body I dare say it would look downright silly. And being exaggerated certainly doesn’t mean the figure doesn’t have some great texturing. The armor in particular looks sufficiently worn and beaten. Someone had a lot of fun sculpting this guy. This version of Chewbacca also got some of the very best paintwork POTF2 had to offer. All of the base paint is cleanly applied, with minimal bleed over. He’s also got some pretty nice work on his fur, which, in story, has patches died to make him look more like Snoova. They could have just been solid blotches of color, but they’ve actually been worked in rather subtly, making them look like they’re actually died into his fur. Chewbacca was packed with a giant blaster and a sci-fi looking axe, which both just add to the 90s over-complication thing. They can both be held, or the axe can also be plugged into his back for storage.

THE ME HALF OF THE EQUATION

This guy was my very first Chewbacca figure. If I recall correctly, Chewie was one of the last main characters I got. I remember that my Grandmother took me to the store (Sears, I think) specifically because I had asked to get a Chewbacca figure. I seem to recall that both versions of Chewbacca were there, but I picked this one. Even then I knew what cool was! The one pictured is actually a replacement I picked up a few months ago, as the original got lost some ways back. I have to admit, I was ready to tear into this one for its absurdity when I first sat down to write this, but I’ve come out of the review with a rekindled love for this X-Treme little guy.

#0624: Yoda

Posted by Ethan Wilson in Reviews and tagged with , , , ,

YODA

STAR WARS: THE BLACK SERIES

Yoda1

After a bit of a hiatus, I’m finally getting back into Star Wars: The Black Series. It’s not really by choice or anything, it’s just that I’ve finally started finding the figures I want again. The stores around me are all still drowning in a sea of Episode III Obi-Wans, so none of them have been getting any of the new figures. So, I have to check other places, outside of my usual stops to actually find the guys I want. Fortunately, luck’s been on my side, allowing me to track down several desired figures, including today’s focus, Yoda.

THE FIGURE ITSELF

Yoda2Yoda was part of the…umm… he was released in the…hmmm. Okay, yeah, Star Wars: The Black Series has done it again. Hasbro’s releases are strange and more than a little hard to follow, so I’m never quite sure where figures actually got released. Yoda’s been given the number 06, but, in all honesty, those numbers are mostly meaningless, since a) they restarted the numbering with Series 4 and b) the numbers don’t seem to have anything to do with order of release. The TIE Pilot is #05, but I know for a fact he came after Yoda. I think Yoda might have been part of the same assortment as the Clone Sergeant, which I believe was the sixth series of figures. The figure is about 3 inches tall and has 19 points of articulation. Now, here’s where the first real issues begin to crop up. See, that’s plenty of articulation, but, for some reason, the figure’s been given double elbow joints, which seem excessive, and nothing but thigh cuts on the legs, so he can’t really do much but stand. Kind of a bummer. The figure has a brand new sculpt, which isn’t a huge surprise. It’s pretty good, overall. The head, hands, and feet all have a nice amount of detail, and the Yoda4clothes are well textured.  The arms are a little bit long, but that’s minor. Of course, most of the sculpt won’t ever be seen, due to the outer robe being done with cloth. I don’t mind the cloth robe at all. It could maybe be a little better tailored and I’m not sure how it will stand the test of time, but it’s not bad. It’s held in place by a small rubber belt, which does its job well, so that’s good. Paint is the one area where the figure (and the line, really) could stand to improve. It’s not bad, but it’s not super great either. The basic colors are fine, but the application is sloppy, and pretty much everything bleeds over. Yoda has a fairly decent selection of accessories, including his signature cane, the blissl flute and snake of the vintage figure, and a lightsaber. What’s that you say? You don’t see a lightsaber in any of the pictures? Well, that’s because goofball Ethan lost it before taking the pictures. Of course, I’m not much of a fan of Yoda having a lightsaber anyway. Plus, as what is clearly an Empire Strikes Back version of the character, the lightsaber’s really not accurate.

THE ME HALF OF THE EQUATION

So, as I mentioned in the intro, none of my main retail stops have gotten any Black Series since Series 2. This presents problems in getting anything that is after Series 2, which happens to be most of the line. With Yoda, things weren’t helped by him being the only OT figure in his assortment, and the only truly new figure as well. So, I kinda figured I wouldn’t be getting one. But, I was killing some time in a Walgreens, and I actually managed to stumble upon this guy! Ultimately, he’s just an okay figure. He won’t be winning any awards or anything. That said, he does a decent job of conveying the character, and he looks good with the rest of the line. Just don’t pay an arm and a leg for him. He’s not worth it.

Yoda3

#0599: TIE Fighter Pilot

Posted by Ethan Wilson in Reviews and tagged with , , , ,

TIE FIGHTER PILOT

STAR WARS: THE BLACK SERIES

TIEPilot1

Star Wars: The Black Series started out pretty strong, but it sort of got a little bit lost for a while, with weird case packouts and a few questionable character version choices. However, it seems like things have picked up a little bit in more recent assortments.  I’ve been starting to find new figures at a more steady pace, which is always a good thing! Let’s have a look at one of the line’s more recent additions, the TIE Fighter Pilot!

THE FIGURE ITSELF

TIEPilot2The TIE Fighter Pilot is part of …ummm….Series 5(?) of Star Wars: The Black Series. I think that’s just means it was the fifth series of the 2014-2015 segment of the line. Hasbro likes to confuse people that way. He’s marked #005 on the package; I think that places him in the second round of numbering, though it would seem he’s been released out of sequence. The figure is just over 6 inches tall and features 28 points of articulation. The TIE Pilot is based on his appearance from A New Hope. The sculpt is mostly new, which actually surprised me a bit. At first glance, I assumed that the TIE Pilot was making use of Pilot Luke’s body. However, upon closer examination, the only pieces they share are the left hand, and the hips. Some of the other parts are similar, but the TIE Pilot is taller than Luke, and the proportions have been tweaked to match. The star piece here is definitely the head sculpt. It’s got a lot in common with the Stormtrooper, but it’s all new. The details are nice and crisp, and everything is properly symmetrical. It looks pretty much like a miniaturized version of the real thing. Paint on the TIE Pilot is on the light side, but what’s there is quite well handled. He’s got the proper Imperial emblems on his shoulders and helmet, which are nice and clean. Also, the figure may be all black, but he’s got matte and shiny finishes on various parts of the uniform, which adds a nice level of realism. The TIE Pilot is also a bit light on accessories, including only a basic Stormtrooper rifle. However, given that the Pilot’s spend most of their time in the TIE Fighters, there aren’t really a lot of accessory options, so I guess it’s forgivable.

THE ME HALF OF THE EQUATION

The TIE Pilot is another addition to my collection courtesy of Super Awesome Girlfriend. We needed to pick up a few things from Wegman’s, and, as I’m prone to do, I wandered over to their small toy aisle, where I found this guy. Since she felt bad for dragging me along on a run to the grocery store, Super Awesome Girlfriend decided to buy the figure for me. Because, as I’ve noted many, many times before, she’s waaaaaaaaaay too supportive of this whole collecting thing. The TIE Fighter is a fun addition to the Black Series line-up, and I’m happy to have one.

TIEPilot4

#0580: Chewbacca

Posted by Ethan Wilson in Reviews and tagged with , , ,

CHEWBACCA

STAR WARS: THE BLACK SERIES

Chewbacca1

Once a line of figures gets a few series in, there will inevitably crop up one or two characters that are noticeably absent. Following the first three series of Star Wars: The Black Series, it was quite obvious that these two characters were Darth Vader and Chewbacca. Then, both found their way into the 5th series of the line. And there was much rejoicing! Yay! Except for one small issue: they weren’t exactly easy to find. See, there were two things that led to this. The first was that stores were sitting on lots of unsold stock of the first four series, so they under-ordered Series 5. In addition, while the series was all new figures, two of the four were variants of previously released characters. Obviously, this made the two new characters even more desirable, causing quite a bit of scarcity. I myself missed out on Chewbacca the first time around, but, fortunately for me, he got a rerelease!

THE FIGURE ITSELF

Chewbacca2Chewbacca was originally part of Series 5 of Star Wars: The Black Series, however he eventually found his way into Series 7 cases as well. He’s figure number 04 in the second round of numbering for the line. The figure has 27 points of articulation and stands a whopping 8 inches tall. He’s actually so tall that he was pushed back to Series 5 from Series 4 so that Hasbro would have time to re-design the packaging so that poor Chewy wouldn’t have to be crammed in some contorted pose in order to be properly seen. Dude’s really big.  Chewbacca is one of the handful of characters who essentially look the same in all of the Star Wars films they appear in. That being said, you can sort of tell which movie he’s from by what his “bangs” are doing. For this figure, they’ve gone with the slicked back A New Hope look, which works fine with me. Given Chewbacca’s unique look, it’s no surprise that he makes use of an entirely new set of sculpted pieces. To be totally honest, it isn’t one of my favorites that the line has produced. It’s certainly not bad, and in fact, they’ve done an admirable job of translating a design that doesn’t work very well on an articulated figure to…umm…an articulated figure. The fur is all pretty well textured, but the breaks for articulation are rather obvious and obtrusive. Not sure it could have been any better, but it looks off. The head was actually the part of the figure I liked the least at first, but my opinion has changed over time and now I think it might be my favorite part of the figure. I’m still not 100% sold on the decision for the mouth to be open, but it looks perfectly fine in person. The sculpt being a little on the wonky side is not at all helped by an iffy paint job. Now, to be fair, this paint isn’t poorly applied or messy. It’s all exactly where it should be. It’s just not as…subtle as it could be. There are two different shades of brown: one dark and one light. The problem is that there’s no shade between, so the change from one to another is rather sudden. It really doesn’t help that many of these changes occur at the connections of joints, which are already a bit jarring to begin with. Chewbacca is armed only with his trusty bowcaster. It might have been nice to get another Stormtrooper rifle or maybe a set of handcuffs, but the lighter accessory load is excusable given the figure’s size.

THE ME HALF OF THE EQUATION

When Series 5 was announced, I knew I wanted to get a Chewbacca figure. However, when I ended up finding the series, I could only find Luke and Vader, with no sign of Chewbacca. That bummed me out quite a bit. I mentioned it to my dad, who kept an eye out for Chewbacca for several months. He finally came across one while getting lunch from Wegman’s one day, much to my excitement. I know I was a little down on this guy in my actual review. I stand by that, but I will say that just having the figure in hand improves my personal opinion of the figure, even if the actual quality could be a bit better. I think part of it is just that Chewy is an important piece of the films and a collection wouldn’t be complete without him.

Chewbacca4

#0579: Bossk

Posted by Ethan Wilson in Reviews and tagged with , , , ,

BOSSK

STAR WARS: THE BLACK SERIES

Bossk1

After going a fair bit of time with no new Black Series figures, I’ve actually managed to pick up a few of them in a relatively short span of time. And, as an added bonus, I didn’t actually have to resort to breaking my “no prequel figures” rule again. Yay? Empire Strikes Back is a lot of people’s favorite film of the original trilogy, due in no small part to the introduction of a rather memorable selection of bounty hunters. Now, they certainly can’t all be Boba Fett when it comes to popularity, but today’s focus, Bossk, is certainly up there.

THE FIGURE ITSELF

Bossk2Bossk was released as part of Series 7 of Star Wars: The Black Series. He’s figure number 10 in the line, though it is important to note that he’s number 10 of the second batch of numbers. Because Hasbro enjoys confusing people. The figure stands just over 6 inches in height and sports 30 points of articulation. His jaw moves, guys. His jaw moves. That’s pretty cool. Bossk features a sculpt that is all-new to this figure. Simply put, the sculpt is nothing short of amazing. The design from the movies has been translated quite nicely. The figure is also just covered in texturing, which makes him quite interesting to look at and shows that Hasbro definitely didn’t phone things in on this guy. Bossk’s paintwork is decent, though not quite up to par with the sculpt. This is Hasbro we’re dealing with here. On the plus side, the base color work is all very well-matched to the film look, and the colors are nice and clean. He also has a nice wash over his head, hands, and feet, which really brings out the smaller details of the sculpt. So, what’s the bad with the paint? Well, you’d be hard-pressed to find an edge on this figure that doesn’t have any bleed over, and you’d be just as hard-pressed to find a surface devoid of any stray marks of incorrect colors. From a few feet away, it’s hardly noticeable, but up close, the figure looks pretty rough. Not terrible, but rough. Bossk’s lone accessory is his blaster rifle. It’s a little difficult to get into his hands, but it’s well sculpted, and once it’s in place it looks great.

THE ME HALF OF THE EQUATION

Bossk was purchased for me by my Dad. He was grabbing lunch at Wegman’s of all places and they had a case of this series. Here I was sitting in Political Science and in comes a text asking if I want Bossk and Chewbacca. Bossk was something of a slow-burn figure for me. I knew I wanted to see him made when the line began, and I was certainly happy to see the prototype, but I just never got really excited about him. That did change a little, but not as much as I would have hoped. The figure probably has the best sculpt in the line so far, but he’s really pulled back by the less than stellar paint. I really wish that Hasbro would put some more work into the paint on their figures, because so many fantastic sculpts are being hidden by lackluster paint.

Bossk4