Category Archives: Reviews

#3294: Aayla Secura

Posted by Ethan Wilson in Reviews and tagged with , , , ,

AAYLA SECURA

STAR WARS: THE BLACK SERIES (HASBRO)

“A cunning warrior and Jedi Knight during the rise of the Clone Wars. A master of the emotional detachment necessary in the Jedi Order, she tried to pass on what she learned”

Even before the tide had generally turned on how people viewed the Star Wars Prequels, there were certain elements that were always pretty well accepted.  Pretty much, anything having to do with Clones, of course, but also a good chunk of the newly introduced Jedi Knights also picked up quite a fanbase.  It helped that they added new ones for each film, and it helped even more when The Clone Wars added further depth to a good number of their stories.  First appearing as one of the Jedi sent to rescue Anakin, Obi-Wan, and Padme from Geonosis in Attack of the Clones, Aayla Secura was a pretty popular character right from the start.  Look, being a blue skinned space chick in a revealing outfit gets you a lot of good will with fanboys.  She resurfaced for Revenge of the Sith, this time paired off with fan-favorite Clone Commander Bly, and she got a rather memorable send-off during the Order 66 sequence.  Despite her fan favorite status, her figures are definitely a bit spaced out.  It’s taken her a decade to finally make her way into The Black Series, but she’s finally here, and I’m taking a look at that figure today!

THE FIGURE ITSELF

Aayla Secura is part of the first main assortment of Star Wars: The Black Series‘s 2023 line-up.  She’s under the Attack of the Clones heading, where she’s figure #3.  Though she’s officially billed as an AOTC Aayla, thanks to her design remaining consistent, she’s able to work as both the Revenge of the Sith and Clone Wars versions of the character as well.  The figure stands 6 inches tall and she has 28 points of articulation.  Aayla’s articulation scheme isn’t quite as impressive as some of the other more recent Black Series figures, being a bit more on par with the pre-2020 stuff.  She’s still able to get some decent poses, but she’s not quite as agile as she could be, I suppose.  Part of this is centered around re-using some parts, as she makes use of the legs from Vice Admiral Holdo, as well as the right arm from Aurra Sing.  Everything else appears to be new.  It’s a pretty decent sculpt, up to par with the rest of the line.  She’s not the spitting image of her on-screen counterpart, but we also only briefly see her on-screen counterpart anyway.  She winds up a little skinnier, I think, than she should be, and her face looks a little rounder, but the rest of the detailing works pretty well.  Her color work is largely handled with molded colors, with just a little bit of paint to cover the basics.  Her eyes seem just a tad askew on my figure, but otherwise, things are basically what they need to be.  Aayla is on the lighter side for accessories, including only her lightsaber.

THE ME HALF OF THE EQUATION

I’ll be honest, I’m starting to slow down on Black Series these days.  Most of the assortment that Aayla’s in wasn’t anything I was dying to own, so I largely skipped on this round.  I did decide to grab Aayla, if for no reason other than that I have Commander Bly, and you can hardly have Bly without his General, right?  She’s not exactly ground breaking or anything, but she’s got a fun visual, and it’s nice to finally get her added to the line after all these years.  And, more Jedi is always a good thing.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#3293: Roboto

Posted by Ethan Wilson in Reviews and tagged with , , , ,

ROBOTO

MASTERS OF THE UNIVERSE: MASTERVERSE (MATTEL)

My Masters of the Universe reviews around here are getting further and further between, I’ll admit.  Part of that is because I’m trying to really stick to my guns on only buying specific characters from each line.  I have three characters that are a lock for any Masters line I’m picking up: Mekaneck, Orko, and Roboto.  The irony of this is that, up til now, Masterverse, the line I’ve been focussing the most on, has only actually had one of those three, Orko, and he was only as a pack-in at that.  Thankfully, there’s been at least one change on that front, as Roboto has officially been added to the Masterverse line!  Let’s see how he turned out!

THE FIGURE ITSELF

Roboto is part of Series 7 of the Masterverse line, alongside Sorceress Evil-Lyn, Stratos, and Frosta.  Roboto falls under the line’s Revelation banner, being specifically based on his appearance in the show.  His very awesome appearance in the show, where he’s the best part.  It was really cool, you guys.  You should check it out.  In Roboto’s case, it means he’s still a pretty classically-inspired version of the character, so he doubles as an update to his original figure, if that’s more your speed.  The figure stands just shy of 7 1/2 inches tall and he has 32 points of articulation (which includes his moving mouthplate).  Roboto’s articulation is largely pretty similar to the others in the line, though he gains an extra swivel at the top of his right forearm, and lacks the usual mid-torso joint, due to the nature of his design.  On my figure, both of the arms had one half of the double elbow stuck right out of the box, so sticking joints is still a recurring issue for the line.  At least the hips aren’t as bad on this guy.  Roboto’s construction is a mix of old and new.  He’s re-using the legs and feet from Trapjaw; the two of them have shared legs going back to the vintage line, and its consistent with their respective designs in Revelation, so the re-use is a sensible one.  I’m still a little iffy on how the articulation works respective to the kneepads on the boots, but it does bug me less on this release than it did on Trapjaw.  The rest of his sculpt is an all-new, and it’s honestly my favorite to come out of Masterverse so far.  It’s very clean, very sleek, and very sharp.  It matches up nicely with his animated design, while still melding well with the established look of the rest of the line.  In particular, I really like the internal structure on the torso.  Roboto’s color work is generally pretty solid.  The paint application is nice and clean, and I dig the mix of metallic and flat colors.  As always, that clear torso’s a lot of fun, and works well with all the sculpted elements inside.  Roboto is packed with two different styles of blaster attachments to swap out for the right hand, as well as the two halves of the Power Sword, this time in a translucent orange, as if he’s fusing them.  The only thing notably missing is his poncho, which does bum me ever so slightly, but I guess it’s an okay omission.  He’s got the needed sculpted attachments, and that’s what really counts.

THE ME HALF OF THE EQUATION

Roboto was my absolute favorite part of Revelation, and I’ve been eagerly awaiting his addition to the line ever since the show dropped.  It sure did feel like they were dragging their feet, but he’s finally here.  I really dig this figure.  Lack of poncho aside, he does everything he needs to, and he’s by far my favorite figure from the line thus far.  Just a real standout, all things considered, and one that’s going to be very hard to top.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3292: Ron Swanson

Posted by Ethan Wilson in Reviews and tagged with , , , ,

RON SWANSON

PARKS & RECREATION REACTION FIGURES (SUPER 7)

At the very beginning of the year, I discussed Parks & Recreation and how it’s the superior workplace comedy when compared to The Office.  Why do I bring this up again?  Well, for one to remind you all that I said it.  I said it and I stand by it.  I’m not backing down on it.  So there.  But, also, it’s because, at the time, I only looked at five figures out of the six figure assortment of figures that Super 7 put out under their ReAction umbrella.  The one figure missing was a character that, if he’s not one of the best characters in the history of TV, is at the very least one of the most distinctive.  That’s right, it’s Ron ****ing Swanson.

THE FIGURE ITSELF

Ron Swanson is the sixth and final figure in the first series of Super 7’s Parks & Recreation ReAction Figures line.  He’s seen here in his usual attire from Season 2 and on, after they’d nailed down the long sleeved polo and khakis look which would become his definitive outfit.  The figure stands about 3 3/4 inches tall and he has 5 points of articulation.  Of the six figures in the set, I think Ron may just have the best likeness.  There’s little mistaking who this guy is supposed to be, right down to his somewhat surly expression.  That’s definitely Nick Offerman, and he’s definitely playing Ron Swanson.  The body sculpt is far more basic, of course, but matches well with the rest of the line.  He’s a little stockier than the other men in the set, which is appropriate for Ron, and he’s again just got the rather standard pose.  Ron’s paint work is rather straight forward.  On mine, it’s a little cleaner than the others I’ve gotten from the line.  I did, however, notice one in the case that I pulled mine from that was, rather amusingly, missing his eyebrows.  Guess he was a Season 3 Ron, huh?  Ron is packed with a plate of breakfast meat, which seems about right for a guy that has a framed picture of breakfast meat on his wall.  Also, it means he pairs off well with Leslie and her waffles.  He still can’t really hold the plate, but at this point that’s expected.

THE ME HALF OF THE EQUATION

When I found the rest of the set, Ron was the only one not present, and I haven’t seen him anywhere since either.  He looks to be the first one to sell out everywhere, which I guess makes some sense.  Thankfully, I was able to get one through work, so my set is complete.  I’m glad I did, because Ron’s honestly the best of the first batch of figures.  He just really nails the character.  I’m hopeful that this set does well enough to justify more, because I really would love to get the whole main cast, and maybe a few of the recurring characters.  But, if it doesn’t, I’m happy that we at least got what we did.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3291: Tactical Wolverine & Marvel Now Magneto

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

TACTICAL WOLVERINE & MARVEL NOW MAGNETO

MARVEL MINIMATES

For the last few years of Fox’s hold on the X-Men film rights, Disney actively discouraged licensees from doing any direct tie-ins with Fox’s movie releases.  So, while we got tie-in assortments for both X-Men Origins: Wolverine and The Wolverine from Minimates, the last of the solo Wolverine films, Logan, went without.  To tie-in with the general themes, however, there was still a comics-based Wolverine assortment in the main line, as well as a corresponding TRU-exclusive.  Today, I’m looking at the TRU-exclusive.

THE FIGURES THEMSELVES

Tactical Wolverine and Marvel Now Magneto were released in the 23rd TRU-exclusive assortment of Marvel Minimates, alongside two shared sets from Series 72 of the main specialty line.

TACTICAL WOLVERINE

“A verteran of many wars, the slow-aging Logan has acquired a great many human combat skills to complement his natural animal instincts.”

As the 65th version of Wolverine to grace the line, Tactical Wolverine definitely comes from a place of “what more can we do to make different versions of this one guy?”  The answer, as it turns out, is add a headband and a vest.  Very exciting stuff, really.  The figure is based on the standard post-c3 ‘mate body, so he’s about 2 1/4 inches tall and has 14 points of articulation.  He’s got add-ons for his hair and vest, plus the adjusted hands and feet with the claws and signature boots.  The hair is the same piece unmasked hair piece that had been in use for a few years at this point, and the hands and feet were the same set-up.  The vest appears to be a unique part.  It’s alright.  Kinda soft on the details, but not the worst.  The paint work on this guy gives him his brown costume, and it’s actually pretty crisp and clean.  I definitely dig the extra stubble on his face; it looks really cool.  For accessories, he’s packed with a mask piece, so that you can convert him to a proper Brown Costume Wolverine, as well as a clear display stand.

MARVEL NOW MAGNETO

“Max Eisenhardt has been both friend and foe to the X-Men over the years. His magnetic powers make him one of the most powerful mutants on Earth.”

Ah, yes, Marvel Now.  Or, I guess Marvel Then at this point, since none of it stuck.  Well, except for Magneto going monochromatic, I guess.  Yay.  Glad that stuck.  Big fan of that.  There were a few different versions of his costume in play.  This one’s sleeveless and black.  He’s got add-ons for his helmet, cape, belt and wrist cuffs.  The belt and cuffs appear to be new, while the cape is a re-use from the Avengers Vs X-Men Scarlet Witch and the helmet is from the Series 50 Onslaught.  The parts are all pretty respectable matches for the source material, so that’s cool.  His paint, monochromatic though it may be, is pretty crisp and clean, and just quite nice looking.  His head gets full face detailing, as well as ears, since Magneto was bald at the time he had this look.  He’s still got the hole in his head, of course, but, you know, there it is.  Magneto’s packed with both a flight stand and a clear display stand.  The flight stand is a bit too small, so his foot doesn’t actually securely stay put, which makes balancing him a real…well, balancing act, I suppose.

THE ME HALF OF THE EQUATION

None of these sets really appealed to me at the time of their release, largely due to me not having a whole lot of money to throw at Minimates.  I got these for the same reason I got most of the Minimates of the same era: TRU was going out of business and they were cheap.  Both figures are pretty nice, all things considered, but they’re also both non-essential looks, which makes this set as a whole kind of extraneous.  Still, they’re not bad.

#3290: Wildcat

Posted by Ethan Wilson in Reviews and tagged with , , ,

WILDCAT

JUSTICE LEAGUE UNLIMITED (MATTEL)

First appearing as a second fiddle of sorts to Wonder Woman in Sensation Comics #1, Wildcat became something of a journeyman hero.  He didn’t officially join the JSA until after the Golden Age had wrapped, but became quite a fixture for the team in the ensuing years.  He’s found his real footing in recent years as the old-timer hero involved in training a good chunk of DC’s street level heroes.  That was the role he found himself in for Justice League Unlimited, where his role as Black Canary’s mentor served as the basis of their shared debut episode “The Cat and the Canary.”  His part in the show got him his second time as an action figure, and I’m taking a look at that figure today.

THE FIGURE ITSELF

Wildcat was released in the second series of three packs for Mattel’s Justice League Unlimited line, alongside Metamorpho and a re-packed Batman figure.  He was subsequently re-packed as a single with a few extra accessories later down the line.  The figure stands about 4 3/4 inches tall and he has 5 points of articulation.  Wildcat is based on the larger male base body, which was based upon the first Superman sculpt from the line.  It’s a decent build for the character, but he does have a little bit of trouble standing.  He’s got to lean all the way back to really balance, which doesn’t quite feel very true to the character.  Wildcat got a unique head and arms.  The head’s a little bit on the tiny side, but is otherwise a nice mold, which does a respectable job of capturing the animation design.  The arms are similar to the standard ones, but with slight tufts of fur on the forearms.  It’s a small touch, but an effective one.  The figure’s paint work is fairly minimal.  Largely, he’s just the molded off-black/purple.  He does get a little bit of paint for his face and his hands.  Nothing too crazy, but it gets the job done.

THE ME HALF OF THE EQUATION

When it first launched, JLU was a rather tricky to acquire line, especially when it came to the three-packs.  After finally managing to get most of the first assortment, I actually lucked into almost all of the second series at once, while vacationing with my family back when they first dropped.  I’ve always had a soft spot for Wildcat, and I liked his appearance on the show, so I was happy to have gotten him.  He’s a pretty basic figure, but he does what he needs to, and he fits the line well.

#3289: Captain America – Tech-On Avengers

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

CAPTAIN AMERICA — TECH-ON AVENGERS

S.H. FIGUARTS (BANDAI)

There’s something of an irony to the most recurrent character at the center of my S.H. Figuarts reviews for the last couple of years has been Captain America, but, well, here I am.  And you know what?  I’m gonna do it again.  In 2021, Marvel partnered with Bandai Namco for a Super Sentai-inspired Avengers series, Tech-On Avengers.  Marvel’s part was publishing a six issue tie-in miniseries, while Bandai’s part was releasing some Figuarts based on the designs seen in the comics.  The premise is pretty simple: the Avengers lose their powers due to shenanigans caused by the Red Skull, so they all have to be outfitted with Stark-designed armor, to become the Iron Avengers.  And I, being me, have the Captain America, which I’ll be taking a look at today.

THE FIGURE ITSELF

Captain America — Tech-On Avengers is the second Tech-On Avengers release in Bandai’s S.H. Figuarts line-up, following the Iron Man from earlier in 2022.  Cap started arriving domestically towards the end of the year, in that early to mid December area.  The figure stands right at 6 inches tall and he has 45 points of articulation.  The articulation on this guy is a little bit finicky; Figuarts often are, but they’ve been getting less so as of late.  This guy’s even more finicky than usual, especially when it comes to the pelvis area.  The waist folds inwards on itself, and the hips are just generally kind of a little tight, which is only made potentially worse by having the waist folded in too far.  There’s also a floating pelvis piece to contend with, which just further complicates movement.  You can still get a decent range out of the figure, but it can take some getting used to.  On the plus side, the way the shoulders are laid out is actually pretty intuitive, and gives him a solid range of motion.  Cap’s sculpt is an all-new one, based on his tech-ed up look.  It’s honestly a pretty fun look, and I kind of dig the Ultraman manga vibe going on here.  It’s a good merging of the Cap, Iron Man, and Sentai vibes, while still maintaining the classic Cap vibe through and through.  The sculpt is quite nicely detailed.  It’s very sharp and clean, and appropriately sleek.  The construction uses just a little bit of die cast metal, which appears to be confined to the feet.  Not sure exactly why, but I guess it at least makes him rather sure footed.  His color work is generally pretty classic Cap fare; red, white, and blue, or at least a close variation of it.  I dig the metallic blue and the varying shades of red, but I’m a bit less sold on the light grey in place of white.  It lacks some of the pop that it should have.  At the very least, the paint work is cleanly applied.  Cap gets an impressive selection of accessories, including five sets of hands (in fists, gripping, flat, open gesture, and with pegs for use with the blast effects), a slightly more tech-y version of his usual shield, four different styles of straps for said shield (for mounting on his back, proper gripping, loose hanging, and one for throwing), a throwing effect, four different blast effects, and a display stand.  One of the gimmicks for Cap’s armor is the ability to use his shield as an extra armor-up feature.  To facilitate that, this guy gets an alternate larger set of hands, forearm guards, shoulder pads, front, back, and lower torso plates, a version of the shield that’s opening up for the armor up feature, and effects for the shield, the front of the torso, and his fist.

THE ME HALF OF THE EQUATION

Overall, Tech-On is a concept that I don’t have much use for.  It’s a bunch of gimmicky variants of characters I have plenty of times over, and they’re all rather on the expensive side.  That being said, I’m a sucker for a fun Captain America variant, and that’s what this guy is.  He’s still perhaps a bit on the pricey side, but there’s plenty going on with this guy that makes him feel worthwhile.  And he’s even got fighting fists?  How can I not love a Cap that has fighting fists?

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3288: Cyclops

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CYCLOPS

MARVEL LEGENDS (HASBRO)

“Scott Summers, aka Cyclops, is one of Xavier’s very first students and fights tirelessly for Xavier’s dream as the X-Men field leader!”

Oh sure, just go ahead and make me buy the same design for a third time, why don’t you?  What do you think I am, Hasbro, an easy target?  Because I am.  I mean, at least when there’s a ’90s Cyclops on the table.  Which there is.  Check it out.  ’90s Cyclops.  Oh, you want context?  Yeah, okay, I’ll give you context.  Remember how Hasbro’s been doing this whole line of animation-inspired X-Men figures based specifically on X-Men: The Animated Series?  Yeah, that’s been pretty cool.  I’ve picked up most of them (I’ve been focusing really just on the core team members, though), and I’ve been enjoying them a fair bit.  But, it’s all been a build up to the one figure I was really, really hoping to see, which was an updated version of ’90s Cyclops.  And, yes, I know I’ve gotten him updated.  On multiple occasions even.  But, look, I can always use more ’90s Cyclops.  And would you look at that?  More ’90s Cyclops.  Let’s review the ’90s Cyclops.

THE FIGURE ITSELF

Cyclops is the eighth figure in the X-Men: The Animated Series sub-line of Marvel Legends.  He follows up on the Mystique figure that I didn’t review, and is currently the last figure in the line-up, at least as far as we know.  Following Scott, Hasbro’s shifting things over to Spider-Man: The Animated Series, so Cyclops is our send-off for the line.  Like the last handful of figures from the set, Cyclops was shown off and went up for order on his own.  He was originally slated for a March 2023 release, but wound up making it out just before Christmas.  As with the rest of the line, Cyclops ships in a VHS-inspired package, with an illustration by Dan Veesenmeyer on the front.  It’s honestly my favorite illustration thus far, but I’m probably a bit biased.  The figure stands about 6 1/4 inches tall and he has 34 points of articulation.  From a structural stand point, Cyclops is using the Vulcan body as a basis.  It’s a decent choice, since it’s been deigned the replacement for Bucky Cap, which was the recurring base body for Scott previously.  It’s just a little bit bulkier, which actually fits a little more with the ’90s Cyclops than Bucky Cap, honestly.  The only down side to the Vulcan sculpt is the glove line on the forearm; it’s not terribly noticeable, but it’s still just a little bit annoying.  Cyclops shares his slightly modified legs with the previously released Morph figure, allowing him to have the proper strappy bits for this costume.  He also re-uses the wrist straps from the prior ’90s Cyclops, which is fair enough.  The figure also gets a new head and a modified torso piece, both courtesy of sculptor Rene Aldrete.  The head is quite similar to the prior ’90s Cyclops head, but goes a bit more in depth with its detailing.  I liked the last sculpt a lot, but this one is a marked improvement across the board.  It’s worth noting that, similar to Morph, the sculpt walks the line between animation accuracy and the line’s usual stylings, suggesting it’s likely to get re-used for a standard color variant at some point down the line.  The new torso, much like the legs, takes the standard torso set-up, and makes the strappy bits an affixed element, rather than just a free-floating piece.  The floating nature of the prior release’s harness was one of my few issues with it, so working it into the torso sculpt not only makes it less of a pain to pose him, it also just makes for a tighter fit and a generally better looking design.  Following in the footsteps of the rest of the line, Cyclops’s paint work replicates the cel shading of the cartoon.  It’s not too pronounced, and like the others, it works surprisingly well from different angles.  I myself still quite like the cel shading on these figures, but I know others aren’t quite as keen on it.  If nothing else, it makes this release a bit more unique.  Cyclops is packed with five different hands, a pair of fists, a pair relaxed, and his usual left hand with the two fingers extended for proper optic blast unleashing.  It’s a little bit bare bones, honestly, but it’s on par with most of these releases, especially given how much new sculpting this one got.

THE ME HALF OF THE EQUATION

I’ll admit, I was pretty hyped for Morph when this line began, because he’s unique and everything, but the figure I was absolutely hoping for the most from this line-up was this guy.  X-Men: The Animated Series‘ take on Cyclops shaped a lot of my view on the character, as well as shaping a lot of what I like in characters in general.  I like a good clean cut hero, what can I say?  I’ve gotten pretty much every possible version of the ’90s Cyclops design out there, and I honestly do love them all.  This guy is just a step above the rest, though.  And, I look forward to buying this exact same figure again, but without the cel shading.  Look, I know what I’m about, okay?

#3287: Starscream – Armada Universe

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

STARSCREAM — ARMADA UNIVERSE

TRANSFORMERS LEGACY (HASBRO)

Launched in 2002, Transformers: Armada really did a great job of moving the collective consciousness back to vehicle mode Transformers after the shift caused by Beast Wars.  With it celebrating 20 years last year, it’s being given a little bit of extra focus in Hasbro’s Legacy imprint, albeit in a rather slow and drawn out sense.  To kick things off, Hasbro’s starting with one of the show’s real fan-favorites, its uniquely heroic take on Starscream.  I’m taking a look at that guy today!

THE FIGURE ITSELF

Starscream is part of the third Voyager Class assortment of Transformers Legacy, alongside the Beast Wars version of Inferno.  The figures hit just before the end of last year.  This figure marks Armada Starscream’s second update since the original Armada run, following up on the Thrilling 30 release from 2014.  In his robot mode, Starscream stands about 6 1/2 inches tall and he has 24 workable points of articulation.  He’s quite a bit more posable than his older release, which is definitely cool.  He’s definitely good for more than just standing around like the old one.  The all-new sculpt is a pretty solid piece.  He’s not quite as thick and blocky as the original figure, but he’s not as angular and thin as the Thrilling 30 release.  It’s a nice middle ground, as I always felt the Thrilling release was just a bit too far removed from that much bulkier Armada aesthetic.  This version hits the spot a lot better, and does a nice job of sticking pretty closely to how he looks in animation.  There’s one sizable downside to this sculpt: his complete lack of any sort of Mini Con ports.  The Cons were pretty essential to the whole Armada thing, and even if packing them in with the figures doesn’t cost out, not including the ports means that they can’t even be released after the fact.  Fortunately, it looks like there was a rather quick course correct on this one, as the upcoming Hot Shot has the ports accounted fore.  Like his sculpt, Starscream’s color work is likewise a pretty good match for his animated design.  The only notable change up is the lack of the black “collar” around the neck.  Otherwise, it looks spot-on, and the application’s all nice and cleanly applied.  Starscream is packed with his Energon Sword (designed to mimic the folding wing sword from the original release), as well as a small version of the Star Saber.

Like his original toy, this version of Armada Starscream transforms into a sci-fi jet.  The same sci-fi jet, even, which is nice bout of consistency.  His transformation sequence is a little more involved than the original, but it’s still got a similar layout.  It’s not too tricky, and it ultimately winds up with a pretty satisfying jet-mode.  He’s stripped of any of the electronic features of the original, but I can’t say I miss them.  In this mode, the swords can both be mounted under the wings, which isn’t quite as convenient and worked in as the original figure, but at least they can go somewhere?

THE ME HALF OF THE EQUATION

Armada hits a real soft spot for me, being the first iteration of the franchise that I actively followed, while it was still fresh and new, no less.  I only had three figures during the original line’s run, but Starscream was one of them, and I’ve always enjoyed this take on the character.  I got a direct replacement for my original Starscream back in 2021, but the idea of an update, especially one a little more true to the character than the Thrilling 30 release.  The lack of Mini Con ports really does suck, but other than that, he’s a very fun update on a figure that I already really liked.  I’m even more hyped for Hot Shot now!

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3286: Nebula & Drax

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

NEBULA & DRAX

MARVEL MINIMATES

“Set to the all-new sonic backdrop of Awesome Mixtape #2, Marvel’s Guardians of the Galaxy Vol. 2 continues the team’s adventures as they traverse the outer reaches of the cosmos! The Guardians must fight to keep their newfound family together as they unravel the mystery of Peter Quill’s true parentage. Old foes become new allies and fan-favorite characters from the classic comics will come to our heroes’ aid as the Marvel Cinematic Universe continues to expand.”

On December 20 of 2017, I noted in the intro to my Minimates Taserface and Mantis review that I hadn’t picked up the Toys R Us-exclusive Nebula and Drax two-pack. Well, the times they are a-changin…in the spring of 2018…when I actually bought this set.  And…then I took quite a few years to actually review it.  And I’m probably making it worse by drawing attention to it here.  But, you know what, I’m just going for it.

THE FIGURES THEMSELVES

Nebula and Drax were the TRU-exclusive pack in the Guardians of the Galaxy Vol 2 tie-in assortment of Marvel Minimates, hitting about two months before the film’s release in 2017.  This pair rounded out the titular team from the film.

NEBULA

For the first movie, Nebula was exclusive to the specialty assortment, while this time around flipped the script and moved her over to TRU.  Still exclusive, but differently so, I suppose.  This release places her in her updated outfit she gets from the Ravagers mid-way through the film.  It’s not crazy different, but it’s got sleeves, and it’s a little redder.  The figure is based on the standard post-C3 Minimate body, so she’s about 2 1/4 inches tall and she has 14 points of articulation.  Like her first release, Nebula is a vanilla ‘mate with no add-ons.  It makes sense, since she’s pretty svelte, and has no notable things that would require anything extra on the standard body.  Nebula’s paint is where the main work is going on.  The detail work is pretty solid; she gets things toned down a bit compared to the previous version, but it’s still impressive, as is the base color work.  Nebula is packed with a blaster pistol and a clear display stand.

DRAX

Drax’s look is the least changed of the main characters in the second Guardians, which makes this release seem pretty unneeded at first glance.  However, this one was largely used to correct an issue with the last release, which bulked him up with a bulky chest piece, generally seen as not the greatest choice for the character.  This one’s only sculpted add-on is a generic pelvis cap piece, which gives him a little more bulk without going too overboard.  Beyond the change of sculpt there are also some changes in terms of paint.  The upper half of the figure is fairly similar to the first movie version, but just a touch crisper on the details.  He also gets the blue Nova uniform pants, rather than the all-black ones, which feature a fair bit more detailing than the all-black ones from the first film.  Drax is packed with his two knives and a clear display stand.

THE ME HALF OF THE EQUATION

While I got the whole Specialty assortment for this movie within a few months after their release, I held off on this one, for a few reasons.  Firstly, I hadn’t gone out and actually tried to find them, and moreover, I was content with the prior versions.  But, with TRU going out of business in 2018, I had another chance at them, for a much better deal.  Nebula I can take or leave; the first one is still a favorite of mine, so this one’s just different to be different.  Drax is actually an improvement, and I quite like the changes they’ve made here.

#3285: Warhawk

Posted by Ethan Wilson in Reviews and tagged with , , ,

WARHAWK

JUSTICE LEAGUE UNLIMITED (MATTEL)

“In the not too distant future, an older Bruce Wayne trains high school student Terry McGinnis to become the new Batman, ensuring the protection of Gotham City for years to come. This new Batman eventually joins the future JLU, teaming up with heroes such as Warhawk, the tough-as-nails son of John Stewart and Shayera Hol.”

Since Batman Beyond‘s tie-in toyline from when it was on the air wasn’t particularly comprehensive, and was effectively non-existent by the time of the later seasons, its best toy coverage came not in its own line, but rather as part of the line for its follow-up show, Justice League Unlimited.  JLU the show was used to more clearly tie the entire DCAU together, in particular giving a little more time to Beyond, as well as its own continuation of the Justice League, the Justice League….Unlimited.  Team member Warhawk, who had previously been something of a blank canvas, was given an actual proper backstory, which wound up being a key plot point within JLU‘s last couple seasons.  As such, he was a pretty natural fit to get his first action figure in JLU‘s tie-in line.

THE FIGURE ITSELF

Warhawk was released in one of the final retail three-pack assortments for Mattel’s Justice League Unlimited line, alongside the previously reviewed Batman Beyond and Bruce Wayne.  The figure stands about 4 1/4 inches tall and has the usual 5 points of articulation.  Warhawk’s starting point was the medium base body, which was patterned on Green Lantern.  Given Warhawk’s parentage, as well as his usual build in the shows, it’s a pretty solid choice of base.  He gets a new head and an overlay piece for his shoulder plating and wings.  The head is a solid piece, though it seems to be a little more inspired by his Beyond appearances than by JLU proper.  They’re not terribly different, so it’s not like it’s really terribly noticeable, especially at this scale.  The overlay is pretty basic; while the hawk symbol appears to be a cut out piece on the show, it’s just painted here, probably for the sake of integrity of the piece.  The wings are separate pieces, glued in place here.  Warhawk’s paint work is fairly well handled.  It’s again going more for the Beyond appearance, given the shading of the skin, but the rest of the colors are pretty neutral for both sets of appearances.  Warhawk was without any accessories.  Most of the three-packs didn’t get any extras, and Warhawk already got quite a few new parts, so it’s not terribly surprising.

THE ME HALF OF THE EQUATION

As I noted in my review of Bruce and Terry, I was mostly out of the line by the time this set came along.  I saw the prototypes, but never anything in person.  Through All Time, I was able to get the other two a couple of years back, which was pretty cool.  But, I certainly had this distinct lack of a Warhawk figure in my collection, and, as luck would have it, the missing piece of the set made its way into All Time.  Boom.  Warhawk.  I’m glad I got him, because he’s honestly the best in the set.  Sure, it would be nice to have the whole team, but at least this guy got a cool toy out of it all.