Tag Archives: Ch’od Series

#3419: Ch’od Series Wrap-Up

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , , ,

EMMA FROST, KID OMEGA, & CHO’D

MARVEL LEGENDS (HASBRO)

I’ve done most of this X-wave as single reviews, but it’s safe to say I’ve taken things as far as I possibly can on that front.  There’s only so much prolonged discussion I can have about X-Men history, especially as we move towards the more recent stuff.  So, let’s get one more assortment out of the way, shall we?  Onto the remainder of the Ch’od Series!

THE FIGURES THEMSELVES

Emma Frost and Kid Omega are figures 1 and 5, respectively, in the Ch’od Series of Marvel Legends, and are the last two figures neccessary to assemble to the set’s Build-A-Figure, wrapping up what appears to be this year’s only BaF assortment for X-Men.  Ch’od is the assortment’s titular Build-A-Figure, assembled by purchasing six of the seven figures in the assortment.

EMMA FROST

“The former Hellfire Club White Queen must grapple with her teammates’ misgivings about her joining the X-Men, as well as her own.”

During Grant Morrison’s run on X-Men, Cyclops and Emma Frost, formerly the White Queen, began a…slightly more than platonic relationship, born out of her assisting him with overcoming being possessed by Apocalypse and then dying and coming back…look, early ’00s X-Men isn’t a great time, guys.  When Jean Grey died at the end of Morrison’s run, Marvel tried real hard to push Scott and Emma as a proper couple, which included placing them both in central spots for the Astonishing X-Men line-up.  Yep, we’re going back to that time that Marvel really wanted up to make proper heroic Emma a thing.  Oh goody.  This is our fifth Emma in Legends form, all of them under Hasbro’s tenure.  This one’s notable for being a proper update to Hasbro’s very first version of the character.  Boy, was that a bad figure.  This one doesn’t have a hard bar to clear to be better.  The figure stands about 6 1/4 inches tall and she has 27 points of articulation.  Her articulation scheme is very restricted, both by the long hair and the cape, which render the shoulder articulation largely useless.  It’s part of the trick of working with this particular design, I suppose.  The sculpt does at least look pretty decent, especially in contrast to other attempts at the character, even just limiting to this look.  She looks quite a bit like Cassidy’s artwork from the book, while still fitting the overall aesthetic of the line as well.  Emma’s color work is basic, but honestly better than I’d expected.  The hair and face get some really strong accent work, which brings a nice degree of life to the figure.  Emma is packed with two sets of hands, in fists and open gesture, as well as the right leg of Ch’od.

KID OMEGA

“Omega-level telepath Quentin Quire, inspired by the attempt of Professor Xavier’s life, joins the mutant nation Krakoa’s new secret defense team, X-Force, as Kid Omega.”

Quentin Quire hails from Morrison and Quitely’s New X-Men run, and, if I’m honest, he’s not a character that’s ever really clicked with me.  He’s just so emphatically symbolic of the sort of self-assured, really insufferable sorts of characters that Morrison really likes to write.  Later writers haven’t really done much to change my opinion.  But, who am I to stop other people from getting a Quentin Quire figure if they want one?  The figure stands about 6 1/4 inches tall and he has 34 points of articulation.  Quire is built on the Amazing Fantasy Spidey base, which is a fantastic starting point for any figure, really.  It’s a more modern Quire, so he’s in a jumpsuit, which works with the base body set-up.  He gets a new head sculpt, which is fine.  It’s not amazing or terribly unique or thrilling, but it looks enough like the character to get the idea across.  The “glasses” are a soft plastic, and prone to warping, which does wind up looking a little bit silly, but that comes with the territory.  The paint work on Kid Omega is decent enough; the pink detailing is sharp and pretty eye-catching, which is cool.  The fingers are painted for the fingerless gloves, and that’s a little sloppy on the edges.  Kid Omega is packed with two sets of hands in fists and gripping poses, as well as a recolor of the Doomlands Vagabond-patterned gun that came with Cable.  Unfortunately, he doesn’t have trigger fingers on either gripping hand, so he can’t really hold the gun properly.  He’s also packed with the torso of Ch’od.

CH’OD

“An alien from the Shi’ar galaxy, Ch’od’s monstrous, reptillian form belittles his keen intellect and heroic heart. Once a slave, he has regained his freedom, and now travels the spaceways in the company of the Starjammers, always on the lookout for other victims of tyranny in need of his aid!”

Hey!  It’s Ch’od!  This guy’s awesome!  A creation of Dave Cockrum and one of the most consistent members of the space pirate team the Starjammers, Ch’od’s the big lizard guy at Marvel who’s *not* Abomination.  I swear, he’s much nicer.  This marks Ch’od’s second figure ever, with his only other release being the one from the Toy Biz 5-inch line.  It’s been quite a while.  The figure stands about 7 3/4 inches tall and he has 29 points of articulation.  Remember what I said above about Ch’od *not* being Abomination.  Well, let’s take that and admit there’s some similarity of design elements between the two.  Hasbro’s taken advantage of said similarities for this figure, as he re-using all but the head, forearms, and hands of the Abomination Build-A-Figure from 2016.  It’s not a pitch-perfect match for Ch’od’s design, but it’s very close, and certainly as close as we can expect for a Ch’od figure in this day and age, honestly.  He gets a new head, forearms, hands, and belt.  The head is absolutely fantastic; it’s a good likeness of Ch’od, and is clearly unique from Abomination.  I especially like the articulated jaw; it adds a lot of character to the figure.  The arms and hands are fairly basic, with only minor changes to the prior pieces for just a touch more accuracy.  His color work is basic, with largely molded plastics, but that works well for the character, and the colors are nice and bright.  What paint work is present is pretty clean, so that’s definitely nice.  Ch’od actually gets an accessory: his furry companion Cr’eee!  It’s an all-new sculpt, with an articulated head and everything.

THE ME HALF OF THE EQUATION

This set is admittedly one that I was more actively invested in than the other two I’ve done these wrap-ups on.  In fact, I think this one is a pretty strong line-up, all things considered.  There’s a pretty solid flow of character choices, and it’s got a pretty killer Build-A-Figure.  Ultimately, it’s Ch’od that’s really the star piece.  He’s just one of those figures I honestly wasn’t expecting to see, and he does well with the parts re-use.  Corsair’s a pretty strong solo contender, being just a very clean and well-implemented release.  Cyclops is a solid figure in his own right, even if he’s ultimately in a slightly less definitive costume.  Fang and Chamber are both a lot of fun, and hampered only ever so slightly by some iffy parts re-use choices.  Monet’s not much to write home about on her own, but serves as a decent set-up for other characters.  Emma is honestly the best version of this costume out there and is only held back by the same design issues that hold back literally every version of this costume.  And Quire’s not really exciting either, but he’s not a character I was invested in in the first place, so that’s hardly surprising.

Thanks to my sponsors over at All Time Toys for setting me up with these figures to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3414: Fang

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

FANG

MARVEL LEGENDS (HASBRO)

“Wolverine takes advantage of his likeness to Imperial Guard Fang and impersonates him to infiltrate the Shi’ar.”

Okay, so, like, that’s….that’s not right. Like at all. Ignoring the very obvious issue that the bio above is talking about Wolverine, and not the actual character this figure is meant to represent, there’s also the fact that while Wolverine and Fang do sport similar characteristics, they certainly don’t look enough like each other for one to impersonate the other. Also, Wolverine didn’t impersonate him to infiltrate the Shi’ar. What actually happened was that Wolverine, in need of a new costume after his was destroyed in battle, stole a replacement from Imperial Guardsman Fang, an expy of the Legion of Superheroes’ Timber Wolf, who was himself something of an inspiration to Wolverine. It gave Wolverine a new look for a few issues, and gave Fang’s design a little extra highlight, which serves as a decent justification for making a Fang figure. I’ll take it!

THE FIGURE ITSELF

Fang is figure 2 in the Ch’od Series of Marvel Legends. He’s one of the three Phoenix Saga related figures in the set, as well as the second Guard in the line (after Gladiator), and Fang’s first actual figure. The figure stands about 6 1/4 inches tall and he has 32 points of articulation. He’s using the cleaned up version of the Spider-UK body that was previously used for Strucker, which is decent enough, but in a perfect world, I think it might have made more sense to put him on the Wolverine body, since they’re depicted as being similarly sized and all. But, they opted for this one, so here we are. He gets a new head sculpt, courtesy of Paul Harding, as well as new add-on pieces for the necklace, belt, and boot and glove cuffs.  The new head is a mix of a few of Fang’s looks from over the years, but it captures the general feel of the character pretty well.  The new add-ons have a little difficulty staying in place, but we’re not quite at the level of 90s Cyclops’s leg bands, so it’s not awful.  The whole thing winds up as a solid recreation of his comics design.  Aiding in that is the color work; it’s basic, but it’s clean, and the color scheme looks like it should.  Fang is packed with two sets of hands, in fists and open claws, as well as the head for the Ch’od Build-A-Figure, and his little animal companion.  He does *not* include any Wolverine parts, which feels like a missed opportunity, and also like it might have been a slight change of plans, especially given the character bio he received.

THE ME HALF OF THE EQUATION

Honestly, this figure surprised me.  I mean, I thought a Fang Wolverine was a longshot, so just a Fang figure, with no Wolverine connection at all, seemed downright impossible.  But, I guess not so much.  Fang is overall fairly by the numbers.  I’m admittedly a little bummed by the lack of Wolverine parts, but he stands out well enough on his own, and I’m certainly not upset about getting another Imperial Guard member.  Here’s to hoping we see some more of them!

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3409: Monet St. Croix

Posted by Ethan Wilson in Reviews and tagged with ,

MONET ST. CROIX

MARVEL LEGENDS (HASBRO)

“Monet St. Croix studies to become the next generation of X-Men at the Massachusetts Academy while unraveling her mysterious connection to some of the team’s greatest enemies.”

Boy, is that just the tip of the iceberg.  Monet St. Croix, sometimes codenamed “M”, is either the first of three sisters, or the combination of the two youngest of three sisters (while the eldest is off being trapped as Penance), or perhaps even a combination of the eldest and one of the two younger ones, or possibly even all three. Her powers are pretty much whatever the writers decide she can do at any given moment, which is both convenient and confusing. She is, however, notable for being a rare Muslim super hero, which was especially notable in the ’90s when she first appeared. And she’s also one of the few Generation X members that the writers cared about after their book ended. Good for her? Up to now, she’s not actually had any action figures, but that’s officially changed!

THE FIGURE ITSELF

Monet St Croix is figure 3 in the Ch’od Series of Marvel Legends, and is the second member of Generation X in this set, following up on the Chamber figure.  She’s sporting her classic team suit, which is by far the most logical choice, especially if Hasbro’s looking to properly build up the team.  The figure stands about 6 1/4 inches tall and she has 29 points of articulation.  Monet is making use of a good chunk of parts from the Shriek mold, which is becoming a go-to starting point for any female figure in this post-pinned joints era of the line.  It’s a pretty decent sculpt all around.  She’s tall and slender, which seems about right for the character.  She gets a new head and upper torso, as well as add-on pieces for the gauntlets, belt, and boots.  The head definitely looks the part, even if that part may be just a tad non-distinct.  At the very least, she does look to be the correct ethnicity, which has classically been troublesome with depictions of Monet.  The suit details are definitely on the mark, and will surely see some re-use as Hasbro gets further into the rest of the team.  If nothing else, she’s a quick head swap away from just being a Husk figure, so she’s got that going for her.  The color work on Monet is decently handled.  She definitely gets the colors of the uniform down the way they were depicted in the comics.  Her skin tone was always all over the place, but I think they arrived at a good spot for her on this release, and the face printing is nice and sharp on this one.  The only thing I’m not crazy about is how lopsided the X is on the belt buckle.  That’s definitely something that should be more consistent.  Monet is packed with two sets of hands, one in fists, the other in open gesture, as well as Ch’od’s left leg.  She feels a bit light to me, especially given how “meh” the alternate hands wind up being.  Given the uniformed look, an alternate Husk head would have been cool, but if they didn’t want to do multiple characters at once, at least a different expression for Monet herself, or even one that could work as one of her sisters might have been cool.

THE ME HALF OF THE EQUATION

I don’t have a ton of attachment to Monet as a character, thanks largely to her not getting a figure in the vintage run, and then not really appearing in much that I followed after that.  All that said, I can appreciate that she’s been in need of a figure for a while.  Since I was getting Chamber, and was therefore going down the Generation X rabbit hole already, she was a pretty easy sell.  She’s not a bad figure.  Not sure about the longevity of me sticking with the team, but hey, we’ll see.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3404: Chamber

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

CHAMBER

MARVEL LEGENDS (HASBRO)

“At the Massachusetts Academy and as a member of Generation X, Chamber learns to manage his biokinetic flame which covers his chest and face”

Okay, but you know that the flame doesn’t *cover* his chest and face, right? It’s important to me that you know it doesn’t *cover* his chest and face. Because, like, his powers actually blew away is jaw and the upper portion of his torso when they manifested. Like, they’re just gone. Anyway, let’s talk about Generation X. Generation X is the generation between the baby boomers and the millennials. No, that’s not right. Generation X is an English rock band fronted by Billy Idol. No, still not it. Generation X is an X-Men spin-off, launched out of “The Phalanx Covenant” crossover in 1994. While most of the initial team was formed from the group of young mutants gathered by the Phalanx during the event, one of their most distinctive members didn’t join until their series proper launched later that year. But join he did, and no one can deny that Chamber was worry the wait.

THE FIGURE ITSELF

Chamber is figure 6 in the Ch’od Series of Marvel Legends. He’s one of the two debut Generation X figures in the line-up, and he’s also Chamber’s first figure since his old Toy Biz figure.  While he would eventually get a variation on the team uniform look, during his initial run, Chamber had his own look, which was really just civilian garb.  That’s what this one goes with.  The figure stands about 6 1/4 inches tall and he has 30 points of articulation.  Chamber’s mobility is a little more on the restricted, partially due to design (it’s hard to get good neck movement with this look), and partially due to the parts he’s re-using.  He’s making use of the lower-half of the Coulson body, which isn’t the most charming selection of parts.  The movement is very limited, especially on the hips and ankles, and the sculpt is also broken up quite a bit by posing the figure, which isn’t very fun.  It also means that he’s wearing dress shoes, which seems a bit off for Chamber.  Thankfully, the rest of him looks to be all-new.  The head’s the real star piece here.  It’s the work of sculptor Paul Harding, who seems to be Hasbro’s go-to for cool fire sculpts right now.  It’s very dynamic, which is truly the best way to handle Chamber’s appearance.  It’s largely meant to be viewed from the front, but it still works from other angles as well.  Chamber also gets a new torso and arms, which aren’t as flashy as the head sculpt, but still pretty solid pieces.  I’m particularly impressed by the texturing on the sweater, because that’s where I am with my life, I guess.  The figure’s color work is largely black, which is expected.  The variation on the head keeps with the dynamic nature of the sculpt, which I certainly enjoy.  Chamber is packed with two sets of hands, as well as the left arm for the Ch’od Build-A-Figure.  Since the head is on a ball-joint, I would have liked to see an alternate head with his collar pulled up over his energy, like he did a lot in the comics.  But, I guess that’s a lot to ask.

THE ME HALF OF THE EQUATION

Chamber’s another one of those characters that I just have this sort of attachment to.  I don’t know exactly why.  He’s just really cool looking, I guess.  I really liked the ’90s figure back in the day, and I’ve been waiting for an update.  This one was very high on my list in a wave that has other very high on my list figures.  I’m not super thrilled about the leg re-use; it seems rather limiting and backwards, honestly.  Beyond that, though, I do really like him, and he’s certainly a step-up from the original figure.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3399: Starjammer Corsair

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

STARJAMMER CORSAIR

MARVEL LEGENDS (HASBRO)

“Cyclops’ world is forever changed when Starjammer Captain and cavalier space pirate Corsair reveals he’s Christopher Summers, Scott’s long-lost father.”

Man, spoilers much?  I mean, seriously, what if I’m not up on my reading from the ’70s?  Or my viewing from the ’90s?  Won’t you think of the people that live under rocks, and yet still inexplicably buy toys?  No?  Well, that’s probably fair.  Since we already know his big secret, I guess, here’s Corsair!  Corsair, the assiumed name of Christopher Summers.  Which is just one name.  Like Madonna.  Or Beyonce.  It’s certainly not “Corsair Summers,” I’ll tell you that much.  Why bring this up?  Personal trauma, that’s why.  But let’s not get into that.  There’s an awesome Corsair figure to be looked at!

THE FIGURE ITSELF

Corsair is figure 4 in the Ch’od Series of Marvel Legends.  This assortment has an interesting flow to it, all sort of headed by Cyclops, so it’s rather appropriate that Scott’s father would be a part of the set.  This is Corsair’s first time as a Legend, and only his third time as a figure, following his Toy Biz and Minimate counterparts.  He’s based on his original, sans shoulder pads design, which makes sense, since that’s the one he’s spent most of his carreer wearing.  The figure stands 6 1/4 inches tall and he has 34 points of articulation.  Corsair makes use of the Vulcan body, which is a sensible choice, seeing as it’s the one used by two of his three sons, and he’s typically depicted as about the same build as them.  He gets a new head and belt piece, as well as a modified upper torso (adding the collar) and forearms (adding the gloves).  I love the new head sculpt.  It really captures that feel of Corsair, and he’s even got that flowy hair!  Plus the dynamic flow on his headband looks really cool, too.  The new torso piece is somewhat baffling, not because it’s bad or anything, but because it’s a different piece than the nearly identical piece that was just used for Banshee, who is also built on the same base body.  Sure, the collars are a little different, but different enough for there to need to be two distinct and different pieces?  I don’t really feel so.  I’m not complaining, or anything, but it’s certainly odd.  Corsair’s paint work is clean, bright, and bold, which are really all of the things that I’d want out of it.  There’s a little extra detailing to help bring some more life to the face, which is very nice, and it’s otherwise just very clean.  Corsair is packed with two sets of hands (in gripping and fists), his pistol, his sword (re-used from Citizen V), and the right arm for the Ch’od Build-A-Figure.

THE ME HALF OF THE EQUATION

“The Phoenix Saga” is hands down my favorite portion of the X-Men books (and also the animated series), so I’m down for anything related to it in toy form.  I’ve held onto my old Toy Biz figure since he was new, but I’ve been hoping to see some Legends love for a while.  Hasbro definitely didn’t disappoint with this one.  He does what he needs to, and he does it well, and he’s just a lot of fun, as a good space pirate should be.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3394: Cyclops

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

CYCLOPS

MARVEL LEGENDS (HASBRO)

“With the loss of Jean Grey still weighing on the team, Cyclops must rally the X-Men to face unprecedented new threats.”

At the turn of the millennium, the X-Men were in a rather creatively bankrupt spot, having burned out exactly all of the momentum they had built up at the beginning of the prior decade.  In order to rejuvenate things, as well as bring things more in line with the first live action film, Marvel hired JLA scribe Grant Morrison, who did a hefty re-work on the team.  And, at the end of Morrison’s run, which was admittedly a rather self-contained story, they needed to re-work things again to keep them rolling forward.  So, they brought in another big-name writer, Joss Whedon, and paired him with a big-name artist, John Cassidy, and they launched Astonishing X-Men.  The results were admittedly pretty mixed, and ultimately, the book kind of thrashed around without purpose for another good while.  But Cassidy did at least come up with some pretty cool costume designs for the team, and that included a cool Cyclops who also makes for a cool figure.  Neat.

THE FIGURE ITSELF

Cyclops is the one unnumbered figure in the Ch’od Series of Marvel Legends, which is the second X-Men assortment of the year, and the first to get a Build-A-Figure.  Cyclops himself is the non-Build-A-Figure-piece-bearing double-pack figure for the assortment.  He’s based specifically on Cassidy’s revamped costume for the character, and marks the second time the look has been adapted to Legends, following one waaaaaay back in Hasbro’s first year with the license. The figure stands 6 1/4 inches tall and he has 34 points of articulation. His articulation scheme is pretty much the same as the Vulcan body, which is a pretty good set-up for Scott. That being said, his actual sculpt doesn’t appear to be borrowing any parts from the Vulcan body, instead being and all-new offering, courtesy of Rene Aldrete. It matches the build of the Vulcan base, which is a good fit for Scott, but adds all of the specific elements for this particular design, with all of the piping, seams, and buckles being 3D elements. It works quite well. I’m not a fan of how the wrist pieces sit, but beyond that, I do like it. The head in particular is rather fun; the little bit of stray energy trailing from his visor is a unique touch.  Though not advertised anywhere, like, at all, the energy effect can be removed, if you so choose.  It leaves quite an indent on the head, and you can’t swap it for other blast effects, which is a slight bummer, but the options are nice. Cyclops’s color work is pretty solid. Not a ton going on, but what’s there is very clean, and gets the job done. Cyclops is packed with two sets of hands, in fists and a relaxed/visor operating combo. It’s a bit light, given he’s got no Build-A-Figure piece, but he’s also a totally new sculpt, so it’s offset.

THE ME HALF OF THE EQUATION

Astonishing X-Men was the first X-book I actively read while it was coming out, so I have a bit of a nostalgic kick for it. Admittedly, it doesn’t really hold up in the end, but there’s no denying that Cassidy’s art was its strongest suit. And I’m always a sucker for a new Cyclops. This one is quite nice. Is he VHS Cyclops? No, but he’s still very nice, and it’s clear a lot of care went into him.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.