Tag Archives: Iron Man (Toyline)

Flashback Friday Figure Addendum #0046: Hawkeye

Posted by Ethan Wilson in Flashback Friday Figure Addendum and tagged with , , , , ,

HAWKEYE

IRON MAN (TOY BIZ)

Okay, I was a bit late on the draw with today’s post, so I bet you thought it wasn’t happening.  Well, ha-ha!  I’m here!  I’m doing the thing!  It’s Friday, so let’s go ahead and flashback, taking aim at Hawkeye!

 Countdown to Avengers: Age of Ultron: 9 days remaining.

Okay, we’re very definitely getting into the selection of characters that I consider to be the quintessential Avengers. And no one gets more quintessential-y than good ol’ Clint Barton, aka Hawkeye! So, let’s have look at a figure of that guy, shall we? In fact, let’s look at the very first figure of that guy ever released! That’ll be nifty!

THE FIGURE ITSELF

HawkeyeIM2Hawkeye was released in Series 2 of the 90s Iron Man line, which was done to tie-in with the Iron Man cartoon of the time. Unsurprisingly, Hawkeye is based upon his appearance in that show, which in turn was based upon the design he had in the comics around the early 90s. It’s a tweak on his classic design, and it’s not too overly 90s, so it works. I do miss the buccaneer boots and loincloth, but oh well. The figure stands roughly 5 inches in height and sports 8 points of articulation, which is actually a little bit below the standard of the time. The lack of proper arm articulation is certainly odd, what with him being an archer and all, but he actually managed okay, thanks to the pose of his arms. The figure’s sculpt was wholly original to him. It’s not bad, especially for the time. The proportions are generally pretty good. The hands and feet are a little on the large side, and the shoulders are a little high-set. He’s also got some ridiculously defined musculature, but to be fair, that’s actually true to the show. The costume details are pretty well handled, with clean lines and some nice texture work on the purple parts. The head is pretty much spot on for the character, with just the right amount of cockiness in his expression. Hawkeye’s paintwork is pretty much on par with other figures from the same time. It’s simple, but well-done. The colors are nice and bold, and everything is clean, with no real slop or bleed over. The eyes are totally white and pupil-less, which is not in keeping with his appearance on the show. However, given how small they are, it’s likely that pupils would have looked rather goofy here, so it was probably the right call. Hawkeye included a bow, arrow, quiver, a small knife, and the weird character badge thingy that was included with all of the figures in the first few series. Of course, my figure has none of these things because silly child Ethan decided to lose them all. Way to go younger me!

THE ME HALF OF THE EQUATION

So, I don’t recall the exact circumstances by which I came to own Hawkeye. I’m fairly certain that he was a gift from my parents. I know my Dad had a Hawkeye figure first, and that I really liked it, so I’m pretty sure he took note of this and bought me one of my own. It’s definitely an important piece in my becoming such an Avengers fanatic, I know that much. Looking back at it, it’s not a perfect figure. The arms are a weird choice, and he’s held back a little by the fact that he’s in a relatively short-lived costume. All that said, he’s my first Hawkeye figure, and he’s still my favorite.

This guy got reviewed as part of my big countdown to Avengers: Age of Ultron, which took up most of the month of April in 2015.  I was really excited for that movie, which feels like maybe it was slightly overboard in retrospect.  I mean, I was still very pleased with the final product and all, but of all the movies to rally so hard behind, that one feels slightly odd.  Far be it from me to get too harsh on my past self for enjoying something, though.  I recall there was almost some last minute shuffling on the schedule, and this guy almost got replaced by the Marvel Select Hawkeye, but I decided that two Hawkeyes in a month was okay by me.  My review’s not too bad.  Hits all the important notes, and is generally positive about a figure that I do still very much like.  I was missing all of his accessories, though, and I’ve thankfully been able to locate them all in the mean time.  He sure does look a lot less silly actually having his bow and arrows!

#3800: Whirlwind

Posted by Ethan Wilson in Reviews and tagged with , , , ,

WHIRLWIND

IRON MAN (TOY BIZ)

“A mutant born with the power to spin at superhuman velocities, Whirlwind delights in using his special talents to terrorize others-first as the neighborhood bully, and now as a powerful costumed Super Villain! Volatile and brutal, Whirlwind doesn’t really care what target the evil Mandarin sends him to destroy-he’ll obliterate it in an instant with maniacal glee!”

We’re back with the Iron Man reviews today, specifically of the Toy Biz variety because that’s what I like to do. I’m keeping things rolling with the antagonists, I suppose. Today’s entry is Whirlwind! It’s worth noting that despite the show’s insistence on sticking purely to Iron Man villains, not filling in with more interesting villains, Whirlwind’s actually not really an Iron Man villain at all, and is instead an Ant-Man and Wasp villain, but I guess Iron Man just sort of takes what he wants. It does seem kind of cruel to steal from Ant-Man, but, you know, that’s just Tony. He’s a bit cruel. This was Whirlwind’s very first action figure, which was pretty cool for him, so let’s take a look at it!

THE FIGURE ITSELF

Whirlwind was released in the second series of Toy Biz’s Iron Man toy line. He’s based on his animated incarnation, which was in turn based on his classic costume, more specifically his second costume design after he added the chain mail and also added a shirt. Thank you for that, Whirlwind. The figure stands about 5 inches tall and he has 9 points of articulation. The articulation on this one is kind of interesting because it’s a sort of a mix of unique and kind of basic. He loses the knee joints, which had become fairly standard of this point, but has disc and peg shoulders. The shoulders are rather loose in order to facilitate his action feature. He also has a waist swivel, but again it’s restricted to facilitate his action feature and isn’t really much for posing. His sculpt is pretty much on par with what we expected from the line. He is a little on the bulky side, but also not bad for Whirlwind. The chainmail detailing is actually pretty good. The hands and feet seemed rather large, and conversely the helmet feels a little small, like it might be difficult to fit an actual head underneath. The face plate is also definitely giving like more ironron Man vibes than Whirlwind usually did, but it’s not bad. Whirlwind’s paintwork is pretty decent, and pretty basic. It’s really just the silver applications. His hands are a little bit more prone to chipping, which is a little bit of a bummer, but not the end of the world. Whirlwind is packed with two removable wrist sawblades, which are super easy to lose, but also super cool. as well as an ID card like the other non-armored characters in the series. Whirlwind has a spinning feature; turning his waist a number of times and then pressing the button on his back to release it will cause his upper half to spin. It works okay, but it does cause some issues with posability.

THE ME HALF OF THE EQUATION

I actually got Whirlwind back close to the original run. I’ve brought up Ageless Heroes a few times on the site. It was a comic store, not too far from where I grew up, that went out of business in ’99/’000. They had a lot of Toy Biz Marvel figures and had they put them on pretty deep discount. So, I picked up a lot of them at the time. This one in particular was sort of consolation prize. The Avengers: United They Stand figures have just been released and were very hard to find at first. After a failed trip trying to find them, my dad took me to Ageless Heroes where I picked out this guy. He’s not perfect, but he’s pretty cool and I do really like him. And, it’s not like there’s a plethora of Whirlwind figures out there.

#3795: Blizzard

Posted by Ethan Wilson in Reviews and tagged with , , , ,

BLIZZARD

IRON MAN (TOY BIZ)

“A once-brilliant scientist driven insane when he tested his portable cold generator on himself, the man now known as the Blizzard has become the twisted enemy of all that is decent. Possessing the ability to create untold amounts of ice and snow with a single thought, the Blizzard always has a chilly reception ready for those who would oppose him-particularly his arch-enemy, Iron Man!”

Okay, let’s jump back into the Iron Man villain well, I suppose!  Last week was Whiplash Blacklash, who’s always been sort of forgettable.  Today it’s Blizzard, who’s not as forgettable in general, but is minorly forgettable in the sense that most people don’t know there’s actually two of them.  The full face mask and generally similar designs don’t really help matters there.  Nor does the fact the cartoon the Iron Man line was based on identified Blizzard as one guy, while the toy identified him as another.  Hooray for confusion!

THE FIGURE ITSELF

Blizzard was released in Series 2 of Toy Biz’s Iron Man line, as one of the three “antagonist” figures.  He’s an adaptation of Blizzard’s animated design, which was a pretty good, solid “classic” Blizzard design.  The figure stands about 5 inches tall and he has 10 points of articulation.  His movement is pretty decent for the era, though it’s not revolutionary or anything.  The sculpt was new at the time (though it saw re-use later down the line for Dormammu of all characters), and it’s generally okay, apart from one odd quirk.  The general build and layout of the costume elements certainly works, but, for some reason, he kinda looks like he has two left feet?  Guess he’s not much of a dancer.  His paint work is limited to a bunch of white on blue plastic.  It honestly works pretty well, though, so it’s pretty striking.  Blizzard is packed with an ice glove attachment for his right hand, an ice cane, and an identification card.  Generally, it’s a nice selection of extras.  He also gets an action feature; much like a number of the earlier Wolverine figures, he has a little thumb-hold on his back, so you can move him at the waist, which will swing his arms up and down.

THE ME HALF OF THE EQUATION

I’ve always liked Blizzard pretty well, and I especially liked him in the cartoon.  I didn’t get this one new, but I got him *relatively* close to new.  I found him loose at a toy show, in the early ’00s.  He didn’t have any of his accessories, but he worked for my purposes at the time.  I just got the chance to complete him a few weeks ago, when a complete one came in through work.  Aside from the slightly odd foot sculpt, he’s a really nice, pretty basic figure.

#3785: Iron Man – Hydro Armor

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

IRON MAN — HYDRO ARMOR

IRON MAN (TOY BIZ)

“When the power of Iron Man is not sufficient to meet the needs of a given situation, the genius of Tony Stark compensates – by creating specialty suits of armor to get the job done! Iron Man’s Hydro Armor is designed to withstand the enormous pressure of deep sea exploration, and is equipped with a battery of on-board weapons designed to function in the murky depths of the deepest parts of the ocean!”

Okay, I’m kicking the month off with another retro Marvel review!  It’s an Iron Man review, specifically from Toy Biz’s Iron Man.  I last looked at this line back in October, with Tony Stark, and now I’m taking a look at one of his many armored Iron Man variants from the show that spawned the line.  The Model 6 Hydro Armor was introduced in the comics in the late ’80s for use in deep sea operations, and it turned up a number of times on the show, which also netted it an action figure.

THE FIGURE ITSELF

Hydro Armor Iron Man was released in Series 1 of Toy Biz’s Iron Man line.  Given the focus on the armor in the show’s first season, it made sense.  The figure was subsequently re-packed in a two-pack with Mr. Fantastic from the FF line, and repacked a few times in the Marvel Universe line.  They were certainly fond of this one.  The figure stands a little over 5 inches tall and he has 7 points of articulation.  In terms of articulation and build, he’s very similar to the other armored figures from this line.  He uses the under-lying figure with clip-on armor set-up.  The under the armor look isn’t based on anything specific, but it’s a neat enough design.  His head is a re-use of the Modular armor head, which tracks with the show design. When fully assembled, the armor looks pretty good, and fairly accurate to the design.  The arm pieces have a little trouble staying put, but that was sort of a recurrent issue with the line.  The head dome piece is cool, even if the entire concept of the dome piece is slightly weird.  The color work on this guy is alright, but suffers from an odd clash between the yellow parts and the chromed gold armored bits.  It doesn’t work as well with gold as it did with silver and red.  The figure is packed with “Deep Sea Weapns”, which translates to a missile launcher and two missiles.

THE ME HALF OF THE EQUATION

I got my original copy of this figure from the KB Toys near my family’s usual vacation spot, during an off-season visit, I believe shortly before my brother was born?  He was appropriately thematic for the trip, but beyond that, he was never a major focus in my collection, especially because I lost most of his armor, and that made him extra pointless.  I wound up getting a replacement very recently, when a complete one came into All Time.  He’s neat, but perhaps not the coolest of the Iron Men this line had to offer.

#3719: Tony Stark

Posted by Ethan Wilson in Reviews and tagged with , , , ,

TONY STARK

IRON MAN (TOY BIZ)

Tony Stark!  Makes you feel!  He’s a cool exec with a heart of steel!  …you know, like in the song?  What, do you not all just have the ’60s Marvel cartoon theme songs on repeat in your heads?  Well, they’re pretty catchy, for what it’s worth.  Today, though, I’m not talking about the Iron Man cartoon with the Tony Stark making you feel, I’m talking about the Iron Man cartoon after that one, from the ’90s.  It had a whole tie-in line of figures, which I don’t look at super, super often.  So, you know what, let’s look at that cool exec with a heart of steel now!

THE FIGURE ITSELF

Tony Stark was released in Series 3 of Toy Biz’s Iron Man line in 1995.  He was one of the three Iron Man variants in the assortment, though I guess he’s only *technically* an Iron Man.  This was Toy Biz’s second go at a suit-up version of Tony-to-Iron Man, and the first to be properly marketed as Tony.  He was also re-released in 1997 under the Marvel Universe banner, though the figures proper are virtually identical.  The figure stands a little over 5 inches tall and he has 9 points of articulation.  His sculpt was all-new, and remained unique to this guy.  It’s based on his “tech underwear” look from Season 1 of the cartoon, right down to the first season’s shorter hair style.  It’s a weird look to be sure, but it’s captured well enough here, and it has the benefit of letting him more easily interface with the rest of the line’s armor gimmick.  He’s got the same ports as the other Iron Men, so you can move over the armor pieces from those ones to sort of mix and match him, if you so choose.  The head sculpt is actually quite nice, and goes a bit further with the detailing than the animation model, with more texturing on the hair and mustache.  His paint work’s pretty sharply handled, if generally on the basic.  The silver and gold is all painted and it’s cleanly applied, as is the black for the hair and the eyes.  Stark is packed with his armor carrying suitcase, which carries his helmet and a pair of shin guards.  The whole thing unfolds to look somewhat like his unfolded armor on the show, and there’s an etched in detail for the armor parts that aren’t present.  The armor pieces are pretty nice.  The helmet’s particularly cool, even if it just covers the front half of his face.

THE ME HALF OF THE EQUATION

If I’m recalling correctly, this figure is actually my first Iron Man.  Well, not Iron Man proper, of course; that was Space Armor Iron Man.  But this one allowed me to dip my toes into the Iron Man world a bit.  I’m pretty sure I got him from a trip to KB with my Dad, and I want to say I got Gambit at the same time?  I still have my original, and most of his parts, but he’s taken a beating over the years, so I got the less beaten up one seen here at Yesterday’s Fun over the summer.  He’s very much function over form, but that only further solidifies him as a fun figure, whom I very much enjoy.

#3350: Spider-Woman

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SPIDER-WOMAN

IRON MAN (TOY BIZ)

“Single mother and Stark Enterprises Vice President, Julia Carpenter conceals a fantastic secret: she possesses the ability to weave psionic webs, and has the strength, speed and agility of a spider! Now, in the guise of Spider-Woman, Julia is determined to turn her astonishing abilities to the downfall of the Mandarin and his sinister schemes of conquest!”

Since Iron Man is a character that’s had a spotty track record with supporting casts over the years, when it came time to give him a cartoon in the ’90s, the show had to sort of make due with the super team he was running around with at the time.  Unfortunately, it was during the brief period of time where that team *wasn’t* the Avengers, and was, instead “Force Works,” a replacement for the Avengers West Coast team, which lasted an astonishingly long 22 issues.  Force Works adopted most of the remaining West Coast line-up, which included Julia Carpenter, the second Spider-Woman, who wound up as one of the members chosen to get the largest focus in the Iron Man cartoon, even remaining in the show when the rest of the team left during the show’s second season.  She got a figure out of the deal, as well, and I’m taking a look at that one today!

THE FIGURE ITSELF

Spider-Woman was released in the first series of Toy Biz’s Iron Man line, as not only this series, but in fact the whole line’s only female figure.  Fellow team member Scarlet Witch was less fortunate (a streak that would continue for United They Stand‘s tie-in line), as was the villainess Hypnotia (who remains without any action figures to this day).   The figure stands 5 inches tall and she has 6 points of articulation.  I’ve looked at Julia’s sculpt previously, once in its slightly modified form as Jessica Drew, and also in its completely repainted form as the Invisible Woman.  Apart from issues with the articulation, it’s actually not a half-bad sculpt, and its only flaw when used for Sue was the lack of eyes, which isn’t a problem here.  Other than that, it’s a rather nice, rather balanced sculpt.  The figure’s paint work is decent enough; to keep with her animation look, there’s a slight purple shade to the “black” sections of her costume, which actually doesn’t look half bad.  The application is a little fuzzy in some spots, but it certainly could be worse.  Julia was packed with her Psionic Webs, which were a big goofy purple thing, as well as an ID badge with her bio on it.  She also got an action feature; there’s a lever on her back, which flips her arms up rather spastically.  It was meant to be a “Psionic Web Hurling Action” according to the package, but it really just looks like she’s flipping over a table or celebrating a touch down or something.

THE ME HALF OF THE EQUATION

Spider-Woman is a figure that I don’t vividly recall getting.  I know she was still new when I got her, and that she was more than likely a gift, probably for either my birthday or Christmas.  I’d guess she came from my parents, since they’re the most likely culprits for purchasing her.  She’s one of those ones that I just recall always being in my collection.  She’s honestly a pretty solid figure, just start to finish.

#3280: Hulk Buster Iron Man

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

HULK BUSTER IRON MAN

IRON MAN (TOY BIZ)

“When Iron Man’s regular armor isn’t powerful enough to get the job done, Tony Stark devises new specialty suits of armor — each tailored to the needs of a specific mission! The heavy combat armor contains few built-in weapons — but it boosts Iron Man’s physical strength to near-impossible levels!”

First appearing in Iron Man #304 as an add-on for the newly introduced Modular Armor, Iron Man’s Hulk Buster armor has become a steady fixture of the character’s armor set-ups.  It was quickly adapted into animation as part of the ’90s cartoon, and with its official appearance in the show occurring the much-improved second season.  The design was granted its first figure in that show’s tie-in line, and I’m taking a look at said figure today!

THE FIGURE ITSELF

Hulk Buster Iron Man is part of Series 3 of Toy Biz’s Iron Man line, as one of three Iron Man variants in the line-up.  Though the armor appeared in the show, this figure’s design owes less to that look and more to his appearance in the comics, likely owing to this figure being released prior to the show’s second season, and the final design not yet being ready*.  The figure stands just over 5 inches tall and he has 9 points of articulation.  The Hulkbuster armor is typically a lot larger in stature than a standard Iron Man, but this one’s only a very slight bit taller, with most of his difference in size being more of a width thing.  He’s certainly bulkier, but he definitely feels somewhat diminutive compared to where he should be.  This was presumably done to keep him within the standard price point range.  As with the rest of the line, the figure’s assembly consists of a core figure with a number of armor add-on pieces, though there are notably a lot less of the armor pieces for this release than there were for the others.  The underlying figure isn’t too far removed from the whole design, but he’s certainly less impactful than the fully-assembled look.  Fully assembled, he gets an additional helmet (rare for these figures), shoulder pads, wrists gauntlets, and boots.  The coloring is a mix of metallic and flat.  It works out alright, but there’s definitely a little clashing between the reds.  At least the yellows match.  Beyond the extra armor pieces, the Hulk Buster doesn’t have any other accessories.  Not that there’s a ton more you could include, I suppose.

THE ME HALF OF THE EQUATION

I was a really big fan of the Iron Man cartoon and its corresponding toy line when I was a kid, so I actually had most of the figures, especially the Iron Men.  Hulk Buster was included.  I don’t recall exactly how I got him, though I assume he was probably a gift from my parents, because they got me most of my Iron Man figures.  While I lost a few of the armor pieces to my original over the years, I was able to snag a replacement that came through All Time a few years ago.  Calling it a win.  I was always the slightest bit let-down by this figure’s scale, but he’s otherwise not a bad little figure.

*Had the Iron Man tie-in line continued, we would have received a more accurate recreation of the show’s actual animation design, also matching the stature and general concept of the Hulkbuster a bit more.  The figure was ultimately scrapped, but the molds would resurface for a few other releases, including the Battle-Action Mega Armor Wolverine.

#1656: Fin Fang Foom

Posted by Ethan Wilson in Reviews and tagged with , , , ,

FIN FANG FOOM

IRON MAN (TOY BIZ)

“Little is known of the powerful and dangerous dragon Fin Fang Foom, only that is is said he is the Mandarin’s worst enemy and greatest ally. He occasionally comes to Mandarin’s aid when he is beckoned, but only doing so because he needs the power of the Mandarin’s rings. He knows that they hold the key to his way back home!”

The Iron Man cartoon from the ‘90s had some troubles finding some decent foes for Tony to face.  His usual gallery of rogues isn’t always the most thrilling.  Perhaps one of the coolest is one that’s not exclusively his.  In fact, it’s a character who wasn’t even created to fight super heroes at all.  Yep, Fin Fang Foom was not originally a super-villain, but instead comes from Marvel’s pre-super hero monster books.  After the super hero craze hit, he got refitted, and he’s been batted around the Marvel Universe over the years.  He’s only had three action figures in his run.  I’ll be looking at the first of these figures today.

THE FIGURE ITSELF

Fin Fang Foom is one of the three figures in the Dragons sub-set of the ‘90s Iron Man line.  He’s based on Foom’s design on the Iron Man cartoon of the time, which isn’t too far removed from his classic design.  I mean, he’s missing the purple shorts, but I suppose that’s not the end of the world.  The figure stands 8 inches tall and he has 9 points of articulation.  His sculpt was unique to him, and remained unique to him.  How many Jack Kirby-designed dragons are there that could make use of it?  Not that many.  To quote Highlander, there can be only one!  The sculpt is pretty decent.  Obviously, it’s a product of its time, and it matches up with the other figures from this line stylistically.  It’s certainly got some elements that are rudimentary in design, especially the legs, which have rather an inorganic shaping to them.  That being said, the overall look is pretty great, and the face in particular has a lot of expression to it, doing a spot-on job of capturing the show design.  The paint work on Foom is actually pretty subtle, with its varying shades of green.  The application isn’t super complicated or anything, but it’s cleanly done, and again, it matches the show pretty well.  Fin Fang Foom doesn’t have any accessories (though you do have to pop his wings into place out of the box), but he does have an action feature.  When you press the button on his back, his wings flap.  Nothing super complex, but a cool little extra nonetheless.

THE ME HALF OF THE EQUATION

Fin Fang Foom was picked up a few months back from the bi-annual Dave Hart toy show.  I’d had my eye on him for a few years, but never gotten around to actually buying him.  Actually seeing him in person was enough to push me to grab him.  He’s kind of a dated figure, like a lot of these guys, but he’s still a pretty fun figure, and a nice piece for the collection.

#1644: Crimson Dynamo

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CRIMSON DYNAMO

IRON MAN (TOY BIZ)

“As the United States had its armored champion in Iron Man, so did the former Soviet Union have their own crusader — the Crimson Dynamo! His first mission was to destroy the symbol of Western democracy — Iron Man — a mission which led to the first of many defeats for the Dynamo. As the Cold War came to a close, so did their animosity; now these uneasy allies focus their combined might against such foes as Fin Fang Foom and Titanium Man!”

The biggest problem faced by the ‘90s Iron Man toyline was Iron Man’s overall lack of a really strong rogue’s gallery.  I mean, he’s got Mandarin, and….alcohol?  That’s hard to do in a toyline, though.  Another good, solid Iron Man foe (and my personal favorite) is Crimson Dynamo.  Unfortunately, Dynamo wasn’t very prominent in the cartoon that the toyline was based on, so it took a few assortments.  Still, at least he got a figure.  Living Laser was on the show a couple of times, and he never did…

THE FIGURE ITSELF

Crimson Dynamo was released in Series 4 of Toy Biz’s Iron Man line, as the assortment’s only villain.  The figure stands 5 inches tall and he has 9 points of articulation.  This figure uses Dynamo’s armor design from the Valentin Shatalov incarnation of the character, which was the most recent version  of the character at the time of this figure’s release.  It’s got a lot more silver than most Dynamo designs (the cartoon even recolored the whole thing red to keep him consistent with other versions), and is a but thinner, making it much more similar to an Iron Man design.  Personally, I’d have preferred one of the earlier models, but I think it’s fair to say this version worked a bit better with the overall style of the line.  As with all of the Iron Men and War Machines of this line, Crimson Dynamo’s fished look is completed using a base figure with a bunch of clip-on armor pieces.  Dynamo had 9 clip-on pieces, for his chest plate, back plate, gauntlets, belt, boots, and helmet horns.  What’s that you say?  You don’t see any horns on his helmet?  Yep, mine’s missing his.  I’d have borrowed them from my dad’s figure, but his is missing them too.  They have a tendency to go missing.  Why they didn’t just make them a permanent fixture of the head is anyone’s guess.  I can’t imagine why someone would want him without them.  The rest of the armor is cool enough, though I’m not a huge fan of how the boots work, since they make posing the figure a bit difficult.  Another major issue with the figure’s design is linked to his action feature, which launches a missile from the middle of the figure’s torso, resulting in a big hole in the middle of his chest.  Another item that harms the integrity of the figure’s appearance for essentially no good reason.  On the plus side, the paint’s decent enough.  Moderate slop on the edges of the silver, but nothing too terrible.  Beyond the clip-on armor, Dynamo also included a flame-styled projectile, meant to go in that big gaping hole int he torso.

THE ME HALF OF THE EQUATION

I believe Dynamo was a gift, possibly for Christmas.  I definitely remember getting one of the other Series 4 figures for Christmas that year, so I think Dynamo was part of the same set of gifts.  Honestly, Dynamo is one of the line’s weaker entries.  Off costume choice, and a number of very strange design choices in the actual implementation of the figure.  He’s hardly a bad figure, but he’s still a rather frustrating one.

#1373: War Machine

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

WAR MACHINE

IRON MAN (TOY BIZ)

“A long-time friend and confidant of Tony Stark, chopper pilot Jim Rhodes was rewarded for his loyalty with his own suit of technological combat armor, turning him into a one man War Machine!  Now armed with an impressive array of cutting-edge weaponry almost the equal of Iron Man’s, War Machine battles shoulder-to-shoulder with the armored avenger in his secret war against the forces of the Mandarin!”

And, just like that, we’re back to Marvel.  That’s gonna be happening a lot.  So, today, I’ll be going back to a ‘90s Marvel line that I feel I haven’t looked at enough: Iron Man!  With just four series (plus a fifth one that was cancelled), it’s hardly one of Toy Biz’s longer-running entries, but four series of an Iron Man line more than a decade before the general public cared about Iron Man is far from the worst thing.  Attempting to capitalize on the success of the then-current cartoon, the line provided us with most of ol’ Shellhead’s supporting players from the show, including Tony’s wingman, Jim “Rhodey” Rhodes, aka War Machine!

THE FIGURE ITSELF

War Machine was released in Series 1 of Toy Biz’s Iron Man line.  This was the very first War Machine figure ever produced (though not the first James Rhodes; Rhodey was still Iron Man at the time of Secret Wars, meaning that figure is technically him).  The figure stands a little over 5 inches tall and has 9 points of articulation.  War Machine is based on the second version of the armor, which was the first one worn by Rhodey.  It’s the version seen in the cartoon, and is one of the best known versions of the character.  As I noted in my review of Space Armor Iron Man, the Iron Man line’s armored figures were handled in a slightly unique way; each of them was a basic figure, with extra clip-on armor parts to really complete their look.  War Machine was actually one of the more faithful basic figures, and can essentially function without the extra pieces if need be, which is a definite plus in his favor.  The sculpt is generally pretty sharp, and the details of the armor match up pretty well with both the show and the comics, though some parts are more condensed and streamlined.  There are the armor ports, of course, which still look a little goofy, but they’re far from the worst thing.  There were 10 clip-on armor pieces included with War Machine: Chest plate, back plate, belt (front and back), shoulder pads, gauntlets, and shin covers.  These pieces serve to enhance the look of the figure, and really make for quite a faithful War Machine figure.  War Machine had one of the better paint schemes of the armored figures; all of the basic paint is nice and clean, and the armor, by virtue of it’s silver coloring, is less prone to issues with chipping and such, which plagued the more colorful Iron Men.  In addition to the clip-on armor, War Machine also included two cannons to be mounted on his shoulders, one of which has missile launching feature.

THE ME HALF OF THE EQUATION

As with a number of the ‘90s Marvel lines, I had to play a little bit of catch-up on the first series of Iron Man figures.  By the time I was really collecting the line for myself, they were onto Series 2.  While I was able to track down a few of the Series 1 figures, I had to settle for Series 4’s War Machine II as my main version of the character.  I’ve been looking for this guy for a little while, but the armored figures from this line aren’t always the easiest to find, especially when you primarily go for loose offerings, like I do.  I was pleasantly surprised to find a loose but complete War Machine at Pop Culture Exchange, for under $5, no less.  He’s definitely a strong offering for the line, and I’m very happy to have finally tracked him down!