Tag Archives: Marvel

#0962: Gambit

Posted by Ethan Wilson in Reviews and tagged with , , , ,

GAMBIT

X-MEN: CLASSIC (TOY BIZ)

The ‘90s were quite good to the X-Men. They several top selling comics, a few video games, and a cartoon. But, most importantly, they had an awesome, hugely expansive line of action figures, courtesy of Toy Biz. Earlier figures in the line were fairly straightforward versions of the X-Men, but as the line continued, Toy Biz started experimenting with a number of different gimmicks to keep things interesting. The very first “gimmick series” gave each figure a light-up feature. Though light-up features weren’t new to the line, these figures were different in that, rather than lighting up themselves, they used a two-part light-up feature that allowed them to light up their accessories. Mostly, the series was just an excuse to release new versions of a few outdated figures. Today, I’ll be looking at Gambit from that series.

THE FIGURE ITSELF

Gambit was released in the X-Men: Classic “Light-Up Weapons Series,” which was the 13th series of figures in Toy Biz’s 5-inch X-Men line. This was Gambit’s second figure in the line, after getting his first back in Series 3. The figure stands about 5 ½ inches tall and has 9 points of articulation. His articulation isn’t terrible, but the light-up feature’s inner workings are in his chest and right arm, which reduces the posablilty of the right shoulder quite a bit and also necessitates removing the usual elbow joints. Though the X-Men line was meant as a tie-in for the cartoon running at the same time, the figures tended to be more directly based on their comics appearances. Gambit actually looks to take a lot of influence from his Capcom game appearances, since he’s rather beefy and stylized. The overall look isn’t too bad, though it does seem like Gambit’s been juicing just a bit, since he’s usually more slender than he’s depicted here. He’s about to burst out of his sleeves for Pete’s sake! Also, his hands are absolutely huge, and if I’m honest the right one barely even looks like a hand at this point. The head exhibits the best sculpted work, and does quite a nice job of capturing Gambit’s smarmy personality. Gambit’s paint is fairly decent, if not fantastic. There’s a bit of slop here and there, especially on the fingers, and the pink lines on the sides of his pants are way more subtle than they should be. The color scheme they picked is once again pretty game-inspired, but it has a nice degree of pop, so no complaints here. Gambit included his usual staff, as well as a piece showing a fan of playing cards being kinetically charged, as if Gambit has just thrown them. The latter piece is the source of the light up feature. When plugged into Gambit’s right hand, the cards would light up at the push of the button on Gambit’s back.

THE ME HALF OF THE EQUATION

This is another ‘90s X-Men figure that I’ve owned two of. The first was bought for me by my grandparents on my Mom’s side, I believe as a reward for finishing kindergarten. I got him and Juggernaut, but I think I mostly got Gambit because my grandparents felt I needed to get a “good guy” figure to go with the villain. Somewhere along the way, I lost that figure, so I picked up this replacement from a dealer at Balticon this year. He’s not a terrible figure, but he definitely shows his age.

#0960: Captain America

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

CAPTAIN AMERICA

MARVEL LEGENDS (HASBRO)

CapCW1

Despite the movie being out for over a month now, the tie-in toys for Captain America: Civil War are still coming out in little dabs and trickles, here and there. There are three assortments of Marvel Legends being released this year to coincide with Civil War, and while the first of those three has been out for a few months, the actual movie-related figures are in the second and third assortments. The second set is starting to hit stores now, and today I’ll be taking a look at the latest version of Captain America!

THE FIGURE ITSELF

CapCW2Cap is part of the second series of this year’s Captain America-inspired Marvel Legends. The series has officially been dubbed the “Giant-Man Series,” after its Build-A-Figure. The figure is about 6 inches tall and he has 32 points of articulation. He’s based on Cap’s appearance in Civil War…sort of. Why “sort of”? Well, if you’re a faithful follower of the site, this guy probably looks familiar. That’s because his sculpt is 100% the same as the one used for the Age of Ultron version of Cap. Which in turn means it’s using everything but the torso from the Winter Soldier STRIKE Suit Cap. That’s not a terrible thing; those are both strong figures, mostly due to the high quality of the sculpt.  And, to be fair, the three designs aren’t that different from each other. However, the AoU figure made some compromises on his design for the sake of re-use from the STRIKE Suit Cap, so this figure inherits those compromises, in addition to having several of his own. The AoU figure at least got the new torso to somewhat make up for it, but this figure doesn’t get anything new. At the very least, a new set of hands without the extra holes in the gloves would have been nice. Also, while the sculpt is still very strong, minor flaws that weren’t a big deal the first time around, such as the slightly small stature of the figure, become much more noticeable with each iteration. This isn’t a bad sculpt at all, and independent from the other two figures to use it, this Cap is still quite good. The paintwork on this figure is a marked improvement over the AoU figure, at least in terms of application, which is all around much sharper and exhibits far less bleed over. The actual palette is much more subdued than the AoU figure, which I think suits the sculpt a bit more than the brighter look of the AoU Cap. For accessories, Cap includes his shield (the same as the ones included with the other two Caps), and the head of Giant-Man. He lacks the unmasked head and extra hands of the last two figures, which coupled with the much smaller B-A-F piece and the totally reused sculpt is a serious step down in terms of value.

THE ME HALF OF THE EQUATION

Super Awesome Girlfriend and I found this figure at a Walmart on the way back from the beach. She asked if I wanted him and I decided I’d be good and skip him, since I already have the other two. So, she decided she’d buy Cap anyway, for herself. Then, when we walked out of the store, she turned to me and said: “Upon further thought, I don’t have space for this Captain America right now. I think I’ll have to leave it with you. Do you think you can take care of it, like a shared custody thing?” She’s crafty that one.

This figure perplexes me. I’ve gotten more or less the same figure twice before, but this time he’s got a far less impressive accessory complement. Plus, they’re putting almost the exact same figure in a three-pack with Spidey, only that one had the missing accessories. I should be annoyed by this figure. But I’m not. Actually, he’s my favorite of the three Caps, and I don’t feel like he’s a waste at all. It’s weird.

CapCW3

#0958: Venom

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

VENOM

SPIDER-MAN: ORIGINS (HASBRO)

VenomSig1

When Hasbro took over the Marvel license, it was actually a little bit of time before they started producing their own molds. The first two series of Marvel Legends had already been designed and sculpted by Toy Biz, which eased the transition there. Since the beginning of Marvel Legends, there was a complementary Spider-Man line. Hasbro kept this tradition up, and launched Spider-Man: Origins, which was a line made up exclusively of repainted figures, offering collectors a second chance at some harder to find molds, and earning them a little bit of good will with the fans. Today, I’ll be looking at one of those repaints, which happens to be a figure of Venom. And awaaaaaay we go!

THE FIGURE ITSELF

VenomSig2Venom was released as part of a two-pack in the “Battle-Packs” assortment of Spider-Man: Origins. He was packed with a fairly basic classic Spider-Man. This Venom is just a repaint of the version from Series 4 of Toy Biz’s 6-inch Spider-Man line, a figure which itself made use of re-tooled pieces from the Planet of the Symbiotes Lasher figure. The figure stands 7 ½ inches tall and has 20 points of articulation. Though his articulation count’s fairly high, his actually movement is rather limited, so he’s not good for much besides a basic standing pose. I reviewed this sculpt rather favorably back when it was Lasher, but I’m not sure how well it made the transition into Venom. Some of the details specific to Lasher have been removed, which makes sense, but also robs the sculpt of some of its richness. The new pieces include the head, lower arms, and lower legs. The head’s not a bad piece, though to position of the neck coupled with the limited articulation means he’s stuck looking up forever. The arms and legs aren’t terrible, but they’re rather long and thin (presumably to make him a bit taller than Lasher), which means they don’t match up very well with the stockier pieces from Lasher. They also don’t have the same sort of musculature, which makes them stand out a bit. And that’s not even touching on the clown shoe feet this guy’s sporting. Yeesh. The original release’s paint was one of its weaker points. Toy Biz tried to do blue highlights, and ended up highlighting a bit too much. Hasbro opted to forego the highlights, instead just doing the black parts in a dark blue/grey. It’s not perfect, and it lacks the striking nature of the original design, but it looks better than the original, overall.

THE ME HALF OF THE EQUATION

This Venom is another figure from the small lot of figures I got from Goodwill a few weeks ago (the same lot that included SM3 Venom and the 12-Inch Symbiote Spider-Man). Neither variation of this figure was ever at the top of my list, but he was in with other figures I was interested in, and the whole thing was only $10. He’s not a super exciting figure, but he’s not horrible either.

#0957: Kang

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

KANG

MARVEL SUPER HEROES SECRET WARS (MATTEL)

KangSW1

Yesterday, I said that Doctor Doom was the greatest comicbook villain of all time. But, what about the second greatest comicbook villain? If I’m honest, I’d probably go with the focus of today’s review, Kang the Conqueror. Now, I’m sure at least some of my readers aren’t super familiar with Kang. Kang’s an old-school Avengers villain. He’s a guy from the future, who went all the way back to ancient Egypt, then decided to come to the present, and then eventually went back to the future, so that he could then come back to the present. It’s a little complicated. In his past he was both Rama Tut and Iron Lad, and in the future he becomes Immortus (another Avengers villain). The point is, he’s a lot of fun. He’s managed to get a surprising number of action figures over the years, but today I’ll be looking at his very first.

THE FIGURE ITSELF

KangSW2Kang is another figure from the first series of Mattel’s Marvel Super Heroes Secret Wars line. He’s kind of an odd choice, truth be told. He’s not one of Marvel’s better known villains, and plays a very minor role in the tie-in comics. Still,I’m hardly going to complain about getting a Kang figure! He stands 4 ½ inches tall and has 5 points of articulation. Kang was built on the basic body for the line, with the arms from Iron Man (and Doctor Doom) and a unique head. The head is goofy, but not a terrible translation of his design from the comics. It’s not quite as good as some of the later Kang figures, but it doesn’t totally suck. It’s a little flat. The Iron Man arms are actually a pretty good fit, though Kang is usually depicted in a loose-fitting shirt in the comics. Kang also has an add-on piece for his belt/suspender thing, which works pretty decently for what it’s supposed to be. Kang’s paintwork isn’t super exciting. I mean, it’s accurate to his design, more or less, but it doesn’t do a whole lot to make it very exciting. The purple and green are both very dark and sort of run together. Also, the face is just straight light blue, with no variation, which looks kind of lazy. Kang included a blaster and yet another goofy lenticular shield.

THE ME HALF OF THE EQUATION

I got Kang at the same time as Doom (and, by extension, Bane), from a dealer at Balticon. My Dad actually bought a Kang about 15 years ago at a flea market, and I’ve sort of wanted my own ever since, though not enough to do any serious searching. But, for $2, he was definitely worth picking up. There have been better Kangs since this one, but this one’s still not bad!

#0956: Doctor Doom

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

DOCTOR DOOM

MARVEL SUPER HEROES SECRET WARS (MATTEL)

DoomSW1

If you asked me who I though the greatest super hero in comics was, I probably wouldn’t be able to give you a single answer. Maybe I could give like a list of five or so, but that’s the best I can do. The best super VILLAIN in comics, though? That’s easy. It’s Doctor Doom. No question. He’s as good as it gets, mostly because he doesn’t shy away from being an absurd comicbook caricature. He’s ridiculous, his plans are over the top and needlessly complicated, and he likes to speak in the third person a lot. He’s just a very fun character. Of course, movie makers decided that they could “improve” on that, resulting in two rather terrible live-action takes on the character, but I digress. Despite being the number one foe of the Fantasic Four, who were all represented in Mego’s World’s Greatest Super Heroes line, Victor Von Doom wouldn’t get his first action figure for another decade. I’ll be looking at that figure today.

THE FIGURE ITSELF

DoomSW2Doctor Doom was released in the first series of Mattel’s Marvel Super Heroes Secret Wars line. Doctor Doom has an interesting place in the line. He had a rather prominent role in the tie-in comic series produced by Marvel, but it’s worth noting that three of the four members of the Fantastic Four were also prominent in the series, yet Doom is the only FF-related character that the line released. Slightly odd if you ask me, but given how much of this line relied on using the same basic pieces for every figure, I guess Mattel just didn’t want to justify the costs of new molds for the likes of Sue or Ben.  Anyway, this figure stands 4 ½ inches tall and he has 5 points of articulation. Rather than going with the classic Doctor Doom design (because, hey, it had only been around for 20 years. Nobody was attached to it or anything), this figure gets a Mattel original design. It keeps a lot of the same basic cues as the usual Doom look, but gives him a more generic battle armor sort of look. To be fair, the design did appear in the comic tie-in towards the end, but I feel that was more to tie-in with the toy than working the other way around. Despite the line being mostly built on the same basic body, Doom actually uses none of the standard parts. That’s not to say he’s totally unique; he shares his arms and legs with Iron Man. Though Doom’s armor is usually not as sleek as Iron Man’s, but they’re close enough that it works alright. The right leg has been slightly tweaked to add a leg strap (apparently Doom was ahead of the ‘90s pouch craze), which works well enough. Doom has a unique head and torso, which are…decent? They don’t suck. There are even some fun little details, such as the jetpack on the back of the torso and the little rivets on the faceplate. Individually, they really aren’t bad, but they don’t work very together. The weirdest thing is the head, which has Doom’s signature hood, which ends rather abruptly. It’s almost as if it was sculpted to rest on top of some sort of cape piece, but no such piece was included. At one time, Doctor Doom had a rather complicated paint scheme on the torso, but Secret Wars figures are notorious for their paint wear, and this figure was no exception. As it stands, my figure’s only paint is on the head, for the eyes and mask, which are basic, but pretty well handled. Doctor Doom originally included two blasters and one of the wonky lenticular shields that all of the line’s figures had.

THE ME HALF OF THE EQUATION

I picked up Doctor Doom last weekend at Balticon. I got him from the same vendor’s table where I got Bane, so he was another $2 figure. Secret Wars really isn’t a line I saw myself getting very invested in, but I keep finding them for pretty good deals. Doom is probably the weakest figure I’ve looked at so far. He really shows off a lot of the line’s flaws, especially with the toy-original design. Still, he’s not the worst figure I’ve ever owned, and I like having him for the novelty.

#0953: Captain America & Winter Soldier

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

CAPTAIN AMERICA & WINTER SOLDIER

MARVEL MINIMATES

Cap&WSCW1

As big a movie as it was, one of the best parts of Captain America: Civil War was that it didn’t abandon the plot threads of its predecessor, The Winter Soldier. Cap and Bucky’s friendship was front and center, and their desire to look out for each other forms the emotional core of the film. Neither character is a stranger to toys, but they’ve gotten a few movie specific figures, including some Minimates, which I’ll be looking at today.

THE FIGURES THEMSELVES

Captain America and Winter Soldier are part of Marvel Minimates Series 66, which is the first of two series based on Captain America: Civil War. Like Panther & Iron Man, these two are one of the sets shared between the specialty and TRU assortments.

CAPTAIN AMERICA

Cap&WSCW2Cap’s STRIKE Suit in The Winter Soldier is generally viewed as one of the stronger MCU designs, so it’s not a shock that his subsequent looks have been tweaks on that design. His Civil War design isn’t much different than his AoU design, just with a few minor changes here and there. Because of the similarity in designs, this Cap and the Series 61 Cap are constructed from the same selection of pieces: add-ons for the helmet, harness, belt, and gloves.  These are all pretty great pieces, and they work very nicely capturing Cap’s onscreen design. Cap’s paintwork is also pretty strong. His costume is exquisitely detailed, and the linework is some of the sharpest that I’ve seen on a Minimate in some time. There’s some minor issue with the basic color work, such as the misplaced “A” on the forehead and the slight bleed over from the brown of the gloves onto the “fingers.” However, the overall paint looks pretty solid. Under the mask, there’s a very angry Steve Rogers, which matches up well with the Mark 46’s Tony expression. For accessories, Cap includes his shield, a shield-bearing hand, an extra hairpiece for an unmasked look, and a clear display stand.

WINTER SOLDIER

Cap&WSCW3Though he might seem a little lacking compared to his pack -mate’s eight different MCU-based Minimates, Bucky here has still gotten three MCU-mates of his own. This one is based on Bucky’s look from the back half of the film. It’s admittedly not quite as exciting a look as the one he was sporting in Winter Soldier, but it’s not terrible. The figure is about 2 ½ inches tall and he has 14 points of articulation. Bucky has two add-on pieces, both re-used: one for his hair and on for the bottom bit of his jacket. The hair isn’t quite a perfect match (since his hair’s a bit shorter this time than it was last time), but it’s close enough to work. Bucky’s paint isn’t quite as solid as Cap’s. A lot of it’s the design, which just doesn’t allow for as many fun details, but there are also a few instances of slop or smears, most noticeably the red star on his shoulder. In addition, there’s one notable flaw: his left hand. The fingers should be silver, since that’s his robotic side, but the figure gives fleshy fingers to both hands. It’s a rather simple mistake, and not too difficult to correct. The likeness on the face is a bit generic, but there’s some definite resemblance to Sebastian Stan. In terms of accessories, this Winter Soldier is a little lacking compared to the last movie’s version. He includes a pistol, an SMG, two knives, and a clear display stand. That’s an okay assortment, but I feel like a rifle would have been a better fit.

THE ME HALF OF THE EQUATION

This set was picked up at the same time as Panther and Iron Man. I don’t find this set to be quite as strong as that one, but it’s not bad. Cap’s a pretty strong figure. He’s not super different from the AoU version, but he definitely has a superior paint job. I think that the Series 55 version of Winter Soldier is still my preferred version, but this one’s still a pretty solid ‘mate.

#0952: Black Panther & Iron Man

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

BLACK PANTHER & IRON MAN – MARK 46

MARVEL MINIMATES

PantherIM1

It’s not really news to the regular followers of this site, but I really, really enjoyed Captain America: Civil War. While it was still undeniably Cap’s movie, the supporting players really stood out. One of the best parts of the movie was Black Panther, who was introduced into the MCU with a standout performance from Chadwick Boseman. I can’t wait to see more of this guy! Until his solo Black Panther movie hits, I’ll just have to hold myself over with some of his toys. Though I haven’t yet found his awesome looking Marvel Legends figure, I did manage to snag his Minimate, which I’ll be looking at today, along with his pack-mate Iron Man.

THE FIGURES THEMSELVES

Panther and Iron Man were released in Series 66 of the Marvel Minimates line. The whole series is based on Captain America: Civil War. These two are also one of the shared sets between the specialty and TRU assortments.*

BLACK PANTHER

PantherIM2Amazingly enough, is is only Black Panther’s third appearance as a Minimate. He hasn’t shown up since Series 29! This one is, unsurprisingly, based on his movie appearance. Admittedly, it’s not very far off from his basic comics appearance, so he could really work as either version in a pinch. The figure stands about 2 ½ inches tall and has the usual 14 points of articulation. Panther’s only add-on is his mask, which is the same piece used by the last two Panther ‘mates. It’s a well-sculpted, simplistic piece, which suits the character very well. It’s too bad he didn’t get a set of clawed hands as well, but that’s a fairly minor nit. The rest of Panther’s detailing is done via paintwork, and it’s some pretty exceptional work at that. There’s a ton of small detail work to make up the unique texturing of Panther’s costume in the movie, and I love how much depth the variations of finish give him. Under the mask, there’s a fully detailed head, with painted on hair and ears. It’s not a perfect likeness of Boseman as T’Challa; for some reason he’s missing his facial hair (which appears to be the case with the Legends figure as well), and his expression is also a bit bland. But, it’s still a nice touch, and adds an extra bit of coolness to the figure. Panther’s only accessory is a clear display stand. It seems a bit light, but I’m not really sure what else they could have given him.

IRON MAN – MARK 46

PantherIM3Tony Stark really likes tweaking his armor. The Mark 46 serves as his only armor during the course of Civil War (I believe this is the first time he’s only had one). It’s not too far removed from the Mark 45, which he wore at the end of Age of Ultron. However, there are a few minor differences, most of which seem to be there to help bulk Tony up so he doesn’t look too overpowered by Cap. As a Minimate, the Mark 46 is built from the same pieces as the Marks 42 and 43, minus the chest piece. That means he’s got add-ons for his helmet, gloves, pelvis, and boots, as well as a non-standard set of upper arms. It’s not my favorite set of pieces, and the selection isn’t a spot-on recreation of what’s seen in the film (there are way too many join lines), but the end result isn’t too bad. The upper arms are still very limiting in terms of articulation, but the effect is at least somewhat lessened by the omission of the chest plate. The paint does a lot to really sell this figure. The colors of red and gold chosen work pretty nicely together, and the detail lines all do a good job of recreating the on-screen armor. There’s a bit of slop on the arms, but it’s all minor and fairly unnoticeable. Under the helmet, there’s a very angry Tony Stark face. I like the change of expression, though I do wonder why he’s lacking the black eye that Tony was sporting during all of his armored scenes. Iron Man is packed with a spare hair piece, a flying stand, and a clear display stand.

THE ME HALF OF THE EQUATION

I picked these two up from Cosmic Comix the week they were released. Amusingly enough, it was actually on the way to take Super Awesome Girlfriend to see the movie. Panther’s definitely the selling point of this set. He’s a new addition to the MCU subset of ‘mates, and the first shot a lot of newer collectors have had at a Black Panther Minimate. He’s also just a pretty solid ‘mate all around. Iron Man’s certainly not a bad addition, but there’s so many Iron Men out there that this one blends in with the crowd a bit. He’s really not bad, and he may well be my favorite MCU Iron Man. He’s just not super thrilling is all. Still, this is definitely a fun set!

*Amusingly enough, in a similar fashion to the Hawkeye/Vision set, the first Black Panther ‘mate was packed with an Iron Man variant.  History repeats!

 

#0950: Axe Attack Thor

Posted by Ethan Wilson in Reviews and tagged with , , , ,

ATTACK AXE THOR
THOR: THE MIGHTY AVENGER

ThorAA1Typically, when a superhero movie gets tie-in toys, the toy company wants to be able to cram as many versions of the main character into the line as possible. This means they tend to invent a bunch of non-canon variants, each one more gimmicky than the last. This is a time honored tradition, going back to Kenner’s toys for the 1989 Batman movie. For some characters, it works pretty well, and the figures sell regardless of their silliness. For others, it’s less successful, resulting in a bunch of figures absolutely no one wants. Well, except for me, because I’m the freaking personification of the Island of Misfit Toys. So, here’s a Thor variant!
THE FIGURE ITSELF
ThorAA2Axe Attack Thor was released in the fourth series of the Thor: The Mighty Avenger line, which was released to coincide with the 2011 Thor movie. The figure stands roughly 4 inches tall and he has 25 points of articulation (the Thor line was one of the last movie lines from Hasbro to be fully articulated). In case you hadn’t gathered from the intro, he’s not based on any design from the movie, but is instead from the minds of Hasbro’s design team. This is the second use of this mold in this line: it was originally used for Series 1’s Battle Hammer Thor. Regardless of where the design came from, the sculpt’s actually pretty awesome. There’s lots of fun detail work, and Athens sculpt is all-around pretty sharp. The head isn’t a spot-on Hemsworth likeness, but it isn’t terribly far off, and it at the very least looks suitably Thor-like. The paint is the thing that differentiates this guy from Battle Hammer Thor. Rather than the usual silver, black, and red, this guy is a mix of blues and turquoises, with just a bit of brown thrown in. It’s not your standard Thor look, but it actually looks pretty solid. The application is also pretty great, with only a few minor issues cropping up. Thor included his gimmicky namesake weapon, which is a weird axe/sword thing with spinning blades at the top. He also includes Mjolnir, but it’s molded in a translucent blue, which goes really well with the figure.
THE ME HALF OF THE EQUATION
I didn’t intend to get this figure, I really didn’t. I picked up the main Thor from Series 1, and that was enough for me. Unfortunately, due to an insane over stocking of the first series, the later series didn’t make it to stores in any timely fashion. Since I wanted Series 4’s Lady Sif figure, I broke down and bought a full set of Series 4 from Big Bad Toy Store, thus getting this guy. I ended up getting rid of most of the other figures, but this guy intrigued me enough to keep him. He’s a bit weird, but I quite like him.

#0949: Iron Man Now! & Indestructible Hulk

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

IRON MAN NOW! & INDESTRUCTIBLE HULK

MARVEL MINIMATES

IM&HulkNow1

Okay, today’s another Minimates review. It’s also another Marvel review, another Iron Man review, and another Hulk review. None of those are particularly rare things for this site, so I’ll admit that I’m running out of things to say about them. So, umm, here’s a review of some Iron Man and Hulk Minimates?

THE FIGURES THEMSELVES

These two were part of the 16th series of Toys R Us exclusive Marvel Minimates. The series was complementary to Series 51 of the main line, and both series were based on the “ Marvel Now!” relaunch from 2013.

IRON MAN NOW!

IM&HulkNow3Though he didn’t get his first ‘mate until Series 6, Iron Man’s become one of the most frequently produced characters in Marvel Minimates. Fortunately, Iron Man’s had lots of diverse looks over the years, which keeps his ‘mates from getting too redundant. This figure stands about 2 ½ inches tall and gas 12 points of articulation. He’s based on his Now! look, which was also the inspiration of the Iron Man in the Hulkbuster Series of Marvel Legends. While that figure used Greg Land’s (traced) interiors for its reference (allowing for the figure to be a simple repaint), this figure seems to draw a bit more from the initial (and far more interesting) design for the armor. Iron Man has six add-on pieces for his helmet, chest plate, gloves, and boots, as well as non-standard pieces for his upper arms. The boots are re-used from Series 45’s Mark VII Iron Man, but the rest of the pieces were new to this figure. He’s a little on the bulky side, but the figure does a pretty nice job of capturing the look from the initial design sheets. Also, the shoulders limit movement a bit, but at least they’re better than the Mark 42/43/45 shoulders. The paint on this Iron Man is pretty standard. He’s got the appropriate black and gold for this design, with a few spots of red thrown in. The red is a bit sloppy in some areas, but not terrible. Under the helmet, there’s a Tony Stark face, which for some reason has random patches of black on it. I think that’s a story specific thing, but I didn’t read Iron Man’s Now! series, so I honestly can’t say. The Tony face is consistent with the other modern Tony’s we’ve gotten, so that’s good. Marvel Now Iron Man includes both a normal display stand and a rocket blast stand.

INDESTRUCTIBLE HULK

IM&HulkNow2This isn’t the first time I’ve reviewed an Indestructible Hulk Minimate, however, this is chronologically the first of the two produced. This figure presents Hulk in his less armored up appearance, which isn’t quite as exciting a design, but I guess it’s a bit more conventional Hulk. The figure has add-ons for the hair, torso, upper arms, hands, pelvis, upper legs, and feet, and he also has an extra riser piece to make him a little taller. The torso, pelvis, and upper legs are new parts, designed to replicate Hulk’s armored shorts. They’re pretty nicely sculpted, which is good. The rest of the parts are reused, which is alright for the most part. The feet don’t have any toes, which is rather odd looking. Of course, the first 15 Hulks didn’t have toes either, but that was before the move to bulked up Hulks. Hulk’s paintwork is decently handled. The linework seems a little thicker than usual, but it doesn’t look bad. The face is a little odd looking; I’m not sure exactly what his expression is supposed to be. It’s not terrible, but it’s not the greatest. Hulk includes R.O.B. (the Recording Observation Bot), a flight stand (for R.O.B.), and a clear display stand.

THE ME HALF OF THE EQUATION

I picked up this pair from TRU’s online store, along with two other sets from Series 16. It was kind of an impulse buy. I can’t say this is one of my favorite sets. Iron Man’s a decent enough variant, but the armor wasn’t super long-lived, and isn’t very memorable. Ultimately, he’s a solidly done figure of a rather drab design. Hulk’s okay, but he suffers from being the lesser of the two Indestructible Hulks, and that toe thing is just weird. Not a bad set, but nothing to write home about.

#0945: Weapon X

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

WEAPON X – BURNED

MARVEL LEGENDS (TOY BIZ)

WeaponXAoA1

The ‘90s had a lot of big comics “events,” especially compared to prior decades, which had virtually none. I think a lot of it had to do with the success of the likes of Crisis and Secret Wars in the ‘80s, prompting the Big Two to do whatever they could to recapture some of that glory. Marvel’s efforts were primarily focused on their cash cow of the time, the X-Men, who found themselves dealing with all sorts of events of epic proportions. At one point, Marvel deemed that it wasn’t enough to make life hell for our own merry mutants, so they showed us how much worse things could have been by launching the alternate reality-based Age of Apocalypse, which examined what the X-Men ‘verse would have been like without Professor Charles Xavier. The storyline took over all of the X-Men-related books, and was generally pretty successful for Marvel. There’s been a smattering of different figures from it all over the years and today I’ll be looking at one of the four Marvel Legends to be based on the event, Weapon X! Apparently, one of the things that changed in the AoA reality was that the title “Wolverine” went to a different character, so poor Logan had to stick with his Weapon X title. Thrilling! Let’s look at the figure!

THE FIGURE ITSELF

WeaponXAoA2Weapon X was part of the Giant-Man Series of Toy Biz’s Marvel Legends. It was exclusive to Walmart and was one of the last series to be produced under Toy Biz’s tenure. There were two versions of Weapon X offered: normal and burned. The difference between the two versions is the head and the stump on the left arm. The figure here is the burned version (the only one of the two I still have). Though this figure was technically a variant, he was packed in equal numbers to his regular counterpart and also featured a different Giant-Man piece, which was quite frustrating for a lot of collectors at the time. The figure is about 6 inches tall and he has 35 points of articulation. Weapon X made use of a lot of pieces from the Series 6 brown costume Wolverine. It was one of Toy Biz’s best Wolverines, and one of the best parts about it was that they really got down Logan’s short, stocky physique. The re-use here was definitely warranted. He got a new head, lower arms, and lower legs, all of which fit pretty well with the rest of the parts, and make for an overall pretty cohesive looking figure. The head is actually really cool. I’m not sure if it’s based on a specific instance of Logan getting burned, since it happens a few times, but the level of detail is pretty awesome, and it’s a nice, refreshing take on the usual Wolverine look. The other unique piece here is the stump, which has claws on this version. In the story, it was revealed that Logan’s claws had been retracted when he lost his hand, so he could still pop them out of his wrist. That’s cool, I guess. The claws suffer from a bit of warping, but are otherwise pretty cool. Weapon X’s paint isn’t bad, provided you ignore his rather doofy looking outfit. Most of the work is pretty clean, and there’s some rather nice accent work in several places. There’s a few instances of scratches or slop, but that’s relatively minor. Also, the painted on arm hair’s a bit silly in some places, but it’s overall an okay attempt. The best part is once again the head, which looks convincingly burned, while still managing to not look too out of place next to the unburned skin of the neck and arms. The only accessory included with Weapon X was the left hand of Giant-Man. Honestly, it feels like the burned head and clawed stump would have made for decent accessories to the regular Weapon X, rather than being a separate figure, but I guess Toy Biz really wanted to sell that extra Logan.

THE ME HALF OF THE EQUATION

Weapon X was given to me as a birthday present by my friend Cindy Woods. I was super into Marvel Legends at the time, and this particular series was fairly difficult to get. She was so excited to find this guy for me that she didn’t notice that some jerk had stolen the Giant-Man piece right out of the side of the box (in her defense, the piece was hidden by the figure’s name tag. Also, who steals just the piece? The figures were like $8!). Fortunately, my dad was able to find another Weapon X online with the piece, so it worked out alright. On the face, this feels like an extraneous Wolverine variant that nobody really asked for. However, this guy’s fun and different enough that he ended up being my one of my favorite Legends Wolverines produced. Definitely a winner!