Tag Archives: Marvel

#0059: Rescue & Robot Hulk

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

RESCUE ARMOR IRON MAN & ROBOT HULK

MARVEL MINIMATES

Today marks the final entry from the most recent Toys R Us exclusive series of Diamond’s quite expansive Marvel Minimates line.  For the last review, I’ll be looking at not quite Iron Man, and not quite the Hulk.  So, maybe it’s not quite a review…

THE FIGURES THEMSELVES

These two were released as part of the 17th Toys R Us exclusive series of Marvel Minimates.

RESCUE ARMOR IRON MAN

First up, it’s Iron Man…according to the box anyway.  In actuality, it’s Pepper, Tony’s on-again-off-again-love-interest.  She recently (okay, in the last five years or so) got her own suit of armor and took up heroing under the name “Rescue.”  I guess Toys R Us wasn’t interested in a figure just called Rescue, but add Iron Man to the end, and their on board!  That ends up being a little awkward for Pepper, who really doesn’t qualify as Iron MAN, but if anyone can bend gender stereotypes, it’s Pepper Potts!  The figue is built on the basic Minimate body, with a few sculpted add-ons, so she’s got 12 points of articulation and stands about 2 ½ inches tall.  She’s got sculpted boots and gloves, as well as a slip over mask.  All these pieces have been used before, but are put to a good effect.  The paint on Rescue is quite well done, with no noticeable slop, smudges or fuzziness, and lots of fine detail work.  The metallic red and silver are also nice and consistent.  Rescue includes a blast off stand, a clear display stand and a spare hair piece to display Pepper unmasked.  That last accessory is great because, Pepper’s unmasked face is one of the highlights of the figure.

ROBOT HULK

Next, it’s Robot Hulk, the robot approximation of Hulk.  Yeah, it’s a complicated concept.  He’s based on…the minds of toy makers everywhere.  Robo Hulk is based on the basic Minimate body with sculpted parts, so he’s got 12 points of articulation and stands a little over 2 ½ inches tall.  He’s got sculpted hair, torso cover, hands, thigh covers and feet.  All but the hair were previously used on the Marvel vs Capcom Sentinel, and the hair is taken from one of the recent Colossuses.  The reuse is warranted and gives him a nice angular, robotic look.  The paint work is all nice and sharp.  Like yesterday’s Venom, Robot Hulk also has a whole nother Minimate underneath all of his sculpted parts.  This time around, it depicts a terminator like rob-suit, piloted by long-time Hulk and Iron Man foe the Gremlin.  It’s a great touch and really adds a lot to the figure.  Robot Hulk is topped off by a clear display stand.

THE ME HALF OF THE EQUATION

As with the rest of this series, the two were ordered from TRU’s online store, with a shocking amount of ease.  Rescue gives us a great comic styled Pepper, which has been a long time coming.  Robot Hulk is kind of filler, but he’s really cool filler, and his importance is helped by the little image of Gremlin piloting, kind of making this a new character.

#0058: Nova & Alien Symbiote Venom

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

NOVA & ALIEN SYMBIOTE VENOM

MARVEL MINIMATES

Today, it’s another entry from the Marvel Minimates line.  Like the last two reviews, this set comes from the most recent Toys R Us Exclusive series.  This time around, it’s the latest incarnation of the character Marvel really wants to take off Nova, and villainous Spider-Man knock-off Venom.

THE FIGURES THEMSELVES

These two were released as part of the 17th Toys R Us exclusive series of Marvel Minimates.

NOVA

First up, it’s everyone’s favorite Galactic Law enforcer!  No, it’s not Ryan Reynolds, it’s actually Nova, specifically of the All New variety.  It’s Sam Alexander, the most recent incarnation of Nova.  He’s built on the usual Minimate body, so he’s got 14 points of articulation and stands about 2 ½ inches tall.  He’s got a sculpted helmet, shoulder pads, and gloves.  The shoulder pads are reused from Wolverine, but the helmet and gloves are new pieces.  They look to be accurate to the source material, which is good.  The paint isn’t terrible, though there is some noticeable slop and a few fuzzy lines.  It’s not terrible, but it keeps the figure from being “great”.   Nova also includes an extra golden helmet to replace his regular one, an extra head w/ hair to make the figure into Sam’s dad, a clear blue blast off base, and the usual clear display stand.

VENOM

Next, it’s everyone’s favorite Topher Grace role!  …okay, not really…look, it’s Venom, okay?  Happy?  Venom is based on the look that Venom’s pretty consistently had since his introduction.  If it ain’t broke, don’t fix it, I guess.  The characters size has varied over the years, and this figure’s meant to show him all ‘roided out like he was towards the end of the 90s.  The figure’s built on the basic Minimate body, with some sculpted parts which bring his articulation to 12 points and his height to a little over 2 ½ inches.  Venom’s got a sculpted mask, torso cover, pelvis cover, thigh covers, feet, upper arm covers and clawed hands.  The bulked up pieces have been used on several of the larger Marvel characters before, and the Venom specific parts have been used before in the Venom: Through the Ages set.  Venom is usually depicted in black and white, but for this figure, Diamond’s replaced the usual black with a dark, semi-metallic blue.  It’s not a huge difference, but it makes the figure different from previous releases I guess.  The paint is pretty good overall, with less of the slop that’s present on Nova.  As a cool bonus, if you remove all the added on parts, and give him the included normal hands and feet, you can assemble a black-costume Spider-Man.   Venom also includes a tendril that can be swapped out for one of his hands, and a clear display stand.

THE ME HALF OF THE EQUATION

Like the rest of this series, I got these two from TRU’s online store, with no real issues for a change.  This set is a perfectly fine addition to my collection, even if it isn’t necessarily.  The ability to use Venom as a Symbiote Spider-Man adds a whole lot to the set, as I think it might be my favorite take on that particular version of the character yet.

#0057: Hawkeye & Black Widow

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

HAWKEYE & BLACK WIDOW

MARVEL MINIMATES

Today, it’s another entry from the Marvel Minimates line.  The two are once again from the recently acquired Toys R Us Exclusive series.  This time around, its Hawkeye and Black Widow, two characters who received a lot of notoriety from last year’s film The Avengers.

THE FIGURES THEMSELVES

These two were released as part of the 17th Toys R Us exclusive series of Marvel Minimates.

HAWKEYE

First up, it’s nobody’s favorite Avenger, Hawkeye (okay, that’s not true.  He’s actually one of my favorites)!  Hawkeye is depicted here in his most recent costume, prominently featured in his current solo series.  I follows the tradition of changing a character’s look to be more in line with their movie look of which Marvel’s grown so fond.  It’s not a terrible look, and it translated well, so no complaints here.  Hawkeye’s built on the basic Minimate body, so he stands about 2 ½ inches tall and has 14 points of articulation.  He’s got a fair deal of sculpted bits, including:  hair, gloves, utility harness with a quiver, a belt, and leg bands.  The hair, belt, leg bands and harness are reused from previous figures, but they are chosen well, so no issues there.  The quiver and gloves appear to be new.  The quiver looks appropriate to the character, and the gloves are a might in the bulky side, but not too bad.  The paint on the figure is a bit hit and miss, the face looks perfect for the version of the character they’re going for, and the change in finish to designate the boots looks cool, but places like the edges of his sleeves are rather fuzzy.  It’s not enough to ruin the figure, but it’s annoying.  Hawkeye is topped off by a bow, three arrows, and the now standard clear display stand.  These pieces are all reused, but if it works, it works.

BLACK WIDOW

Second, it’s the best former Soviet spy turned kick-ass Avenger Marvel’s got: Black Widow!  Widow’s rocked the black skintight catsuit quite a few times over the years, but this figure is based on the look she has currently in particular.  It’s a look that’s lasted for so many years for a good reason, so its use here sees no complaining from me.  Like Hawkeye, she’s on the typical Minimate body, so she has 14 points of articulation and stands about 2 ½ inches tall.  She features sculpted hair, wrist bands, and leg holsters.  The pieces are all reused, but they all work appropriately for the desired look.  The paint on Widow is a bit better than Hawkeye, though there is a tiny bit of slop on her neckline.  Widow includes two silver handguns and a clear display stand.

THE ME HALF OF THE EQUATION

Like the rest of this series, these two were gotten off of TRU’s website, with no real issues this time around.  I’m really glad because these two are definitely the set from the series I was looking forward to the most.  These two definitely didn’t disappoint.  Widow is a grate update to her traditional look, and while Hawkeye’s not my favorite of his looks, the Minimate is really well done.

#0056: Superior Spider-Man & Ultimate Electro

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

SUPERIOR SPIDER-MAN & ULTIMATE ELECTRO

MARVEL MINIMATES

Hey look!  More Minimates!  Yes, it’s Ethan’s favorite line to review, up for review once again.  Unsurprisingly these are from the Marvel Minimates line.  I just recently acquired the latest Toys R Us exclusive wave from the ever stubborn Toys R Us website, so I’ll be taking a look at them over the next few days.  First up, it’s the flagship set of the wave:  Spider-Man and Electro.

THE FIGURES THEMSELVES

These two were released as part of the 17th Toys R Us exclusive series of Marvel Minimates.

SUPERIOR SPIDER-MAN

First up, it’s the man himself:  Spider-Man.  Okay, actually that’s a lie, and I’ll get into that in a second.  Spider-Man is built on the typical Minimate body, so he stands about 2 ½ inches tall and has 14 points of articulation.  So, why isn’t he the man himself?  Because this figure is based on his most recent look from the current Superior Spider-Man series, where Peter Parker’s mind has been over-written by longtime foe Doctor Octopus.  So, that happened.  Anyway, good or bad, it’s made for some interesting designs, so here we are.  This look in particular is SpOck’s second look, which is somewhat based on Alex Ross’s proposed design for Sam Rami’s first Spider-Man movie.  SpOck’s look is completely conveyed via paint.  All the paint work is pretty good, although some of the red areas are a bit thin, but nothing too bad.  There have been reports of the eyes being misaligned with the web pattern of the mask, but mine doesn’t seem to have that problem.  SpOck also includes an extra unmasked head, a strand of web, and a clear display stand.  The unmasked head conveys the smugness of the new “Peter Parker” well.

ULTIMATE ELECTRO

Second, it’s one of Spidey’s foes, Electro.  Like SpOck, Electro is built on the usual body, so he’s got 14 points of articulation and stands about 2 ½ inches tall.  Electro is based on his look from the Ultimate line of comics*.  Like Spider-Man, he’s just the basic minimate body with no additional sculpted details.  He’s got a few details, and a really great evil grin, all on a really neat clear blue body.  I love me some clear plastic.  Electro is packed with two clip on electricity parts for his arms, a power base, 2 electricity “whips”, and a clear display stand.  Everything but the “whips” is reuse, but it all works well for the character, so no complaints here.

THE ME HALF OF THE EQUATION

So, like most of the Toys R Us exclusive Minimates, I got these from the TRU website.  Fortunately everything went smoothly this time, so yay!  As far as the set itself, it’s a really cool set of Minimates, but not of looks that are my favorites.  But well-made toys are always really cool.

*The Ultimate universe was Marvel’s attempt in the early 2000s to create a more realistic, and easily accessible line of comics to lure in new readers.  It was a success for a few years, but has recently gotten incredibly bogged down in continuity and has more recently become Marvel’s place to do more “daring” things that they don’t want to do in their regular universe.

#0055: Angel – Savage Land

Posted by Ethan Wilson in Reviews and tagged with , , , ,

ANGEL – SAVAGE LAND

X-MEN (TOYBIZ)

The 90s X-Men line!  Now there was a line.  I haven’t really looked at this line yet on the site, aside from the Original Members Boxed Set, which wasn’t actually part of the line.  But in the 90s, the X-Men were the big thing.  They had a TV show, their comics sold millions, and they had one of the most comprehensive toy lines to date.  There was a Cho’d action figure for God’s sake!  Towards the end of the line, they began to run out of new characters to release, so they started doing these theme waves with rereleases of the main characters.  One of those theme waves was a set of figures based on the X-Men’s many trips to the Savage Land.  It featured figures of the X-Men in tattered “Savage Land” uniforms.  Today, I’ll be looking at the Angel figure from that line.

THE FIGURE ITSELF

So, as I said above, Angel here hails from the Savage Land series of Toybiz’s 5-inch X-Men line.  He stands roughly 5 inches tall and has 11 points of articulation.  If you read the review of the Fallen, you’ve seen a lot of this figure before.   He shares all but his head, arms and feet with that figure.  The head was actually one that saw frequent reuse over at Toybiz, and I know this wasn’t the first figure to use it, but I honestly don’t know what was.   Anyway, it works fine here, though it might be a bit scowly for a pre-Archangel Warren Worthington.  The figure’s look is mostly done through paint, which depicts a tattered version of Angel’s blue and white costume from the silver age*.   It’s cool to see this costume here, but a bit disappointing that the costume never got a proper release.  Angel at one point featured a pair of (very small) wings, a gray vest with an X-logo, and some weird claw thing that attached to his wrist, but I lost most of those pieces many years ago.

THE ME HALF OF THE EQUATION

I got this figure on one of my many trips the KB Toys outlet in Rehobeth Beach.  I was very excited to get it because Angel figures were a bit of a rarity in the 90s.  I know I really liked this guy, and for reasons I can’t fathom at this point, I know he spent a lot of time in my Ghostbusters Ecto-1.

*In super hero -comics, the first 40 years or so are divided into three “ages”:  The Golden Age, The Silver Age, and the Bronze Age.  The Sliver age, at Marvel any way, is believed to start with Fantastic Four #1, and end somewhere around Giant Size X-Men #1.

Read the Flashback Friday Figure Addendum here!

And there’s a second one here!

#0051: Wolverine & Yukio

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

WOLVERINE (YUKON) & NINJA YUKIO

MARVEL MINIMATES

Today, I’ll be taking a look at yet another set of Minimates.  Like the last Minimates review I did.  These also come from the tie-in line from this year’s The Wolverine.  Once again, it features a variant of the title character, this time packed with his trusty companion Yukio.

THE FIGURE THEMSELVES

These two were released as part of the Toys R Us tie-in series for The Wolverine.

WOLVERINE (YUKON)

First up, it’s our hero Wolverine.  He’s depicted in his “Yukon” look, from early in the film.  This is the look that Logan sports for the first half an hour or so of the movie.  It’s a very different look for the character, and is important to the character’s story in the film.  It’s also really unique, which makes it stand out pretty well on the shelf.  He’s built on the basic Minimate body, so he stands about 2 ½ inches tall and has 14 points of articulation.  He has sculpted pieces for his hair, jacket and claws.  The claws are the same as those used on the rest of the Wolverines in the wave.  The hair and jacket are new pieces.  They are sculpted well, and accurately depict his look from this point in the movie.  The paint is well done on the figure.  In spite of it not being a default look, I think that the likeness on this Wolverine may be the best Jackman likeness so far.  The paint on the coat could possibly be a little better, with so noticeable slop on the edges, but nothing too bad.  There’s some great detail work on the pants, with the wrinkles and such all being present.  And underneath the jacket piece, there’s also chest detailing, showing Logan in a brown turtle-neck.  I don’t recall him wearing it in the movie, but I could be wrong.  Regardless, it’s a nice touch.  Yukon Wolvie is rounded out with a pair of spare normal hands and a clear display stand.

NINJA YUKIO

Next up is Yukio, who fills a role that would conventionally be referred to as the “sidekick”,   but that doesn’t seem quite right for Yukio.  Were it not for the fact that the title of the film was “The Wolverine”  I feel like she’d fall more into the hero role.  Anyway, she’s depicted here in her “ninja” look, at least according to the package.  I’d personally describe it more as a formal look, since it’s what she wears during the funeral sequence.  It’s one of her two main looks from the movie, so it makes sense to see it here.  Like Wolverine, she’s built on the base Minimate body, and has the standard 2 ½ inces of height and 14 points of articulation.  As far as sculpted pieces, there’s her hair, her forearms, her skirt, and here boots.  The forearms are shared with Mariko from the specialty wave, the hair was previously used on the Amazing Spiderman Gwen Stacy, and the boots have seen numerous previous uses, including the Urban Yukio from the specialty wave.  Near as I can tell, the skirt is a new piece.  The paint is all fairly well done, though there is a bit of slop on the hair.  The likeness is better here than on the Urban Yukio I feel, but still a bit off.  Rila Fukushima, who plays Yukio in the film, has a very uniquely shaped face, which seems to be difficult to translate to the cylindrical Minimate head, so I think Diamond did a pretty good job.  Yukio is accessorized with a sword and a clear display stand.

THE ME HALF OF THE EQUATION

This set was ordered online via tru.com.  Unlike Wolverine & Harada, I had no real issues acquiring this one, so that’s good.

I really like this set, it has a really unique Wolverine, and a very well done version of Yukio, who is one of the best characters in the movie.  While I don’t think either figure is going to be the definitive version of the character for me, it’s a really fun little set!

#0049: Wolverine & Harada

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

WOLVERINE (PRISONER) & KENUICHIO HARADA

MARVEL MINIMATES

The Wolverine was released this summer.  It was a sequel to X-Men 3, and it was one of those few times that a movie actually manages to make its predecessor better, not by making it look better by comparison, but by retroactively adding some emotion to a lackluster film.  The Wolverine was not a perfect movie, but it wasn’t bad either.

Like most of the recent Marvel movies, Diamond Select Toys did a selection of figures from their Minimates line in order to tie-in with the movie.  Like previous movies, this one was given a comic book store assortment, and a Toys R Us assortment.  I’ll be taking a look at one of the sets from the Toys R Us assortment today.

The characters featured are, of course, Wolverine himself, and somewhat antagonist, Kenuichio Harada.

THE FIGURES THEMSELVES

Like I said above, these guys were released as part of the Toys R Us tie-in series for The Wolverine.

WOLVERINE (PRISONER)

First up is the titular character.  Wolverine is depicted here in his “prisoner” look, which is what he’s wearing during the WWII era flash-backs in the film when he is a POW in Japan.  There’re some important scenes that feature him with this look, so it’s not surprising to see it pop up here.  It’s a bit odd to see it packed with Harada, but it’s not a huge deal.  The figure is once again built on the basic Minimate body, standing about 2 ½ inches tall and featuring 14 points of articulation.  He features sculpted hair and claws and a sculpted belt.  I’m not 100%, but I’m fairly certain that the claws are a reuse from a previous Wolverine.  The other pieces are new, although the hair piece was also used on two of the three other Wolverines in the wave.  Wolvie is mostly molded in the appropriate colors, but the paint still makes up most of the detailing.  It’s well done and fairly intricate.  The face on this version is fairly calm, which is okay, since Wolverine kept pretty calm during the captivity scenes.  The Hugh Jackman likeness is better than some of the one’s we’ve seen in the past, but not quite dead on.  Wolverine includes the sword he was presented by Yashida, a display stand, and three sets of hands:  one regular, one clawed, and one bone clawed.  The Adamantium claws aren’t scene accurate, but I appreciate that they give people the option to choose.

KENUICHIO HARADA

Next is Japanese Hawkeye  Kenuichio Harada, technically an antagonist, but an unwilling one, making him more of an anti-villain.  He’s shown here in his ninja gear from the film, which is what he spends most of his screen time in, so it makes sense.  Like Wolverine, he’s built on the basic Minimate body, meaning he stands about 2 ½ inches tall and has the standard 14 points of articulation, although his hair restricts the neck joint a bit.  Harada has a sculpted jacket and hair, as well as wrist pieces to simulate the ends of his gloves.  The hair and jacket are new pieces, although the jacket is shared with the Black Clan ninjas also in this wave.  The hair seems a bit off for the character, whose hair was far less bulky in the film.  It looks right in the control art on the box, but something seems to have been lost in translation.  Paint wise, he’s really only got the detailing on his face, which is passable.  The likeness isn’t as good as Wolverine’s, but it isn’t too bad.  Harada is rounded out with his trusty bow, two arrows, an alternate masked head, and a clear display stand.  The Bow and arrows appear to be reused from one of the Haweyes from last year, and the head is identical to the head on the Black Clan ninja.

THE ME HALF OF THE EQUATION

Oh boy.  Hold on tight guys, it’s another tru.com story.  Yeah, so I’m always uncertain as to whether my local TRU will get their exclusive wave, so I tend to order online.  I’ve mentioned before that tru.com has a tendency not to put up pictures or label their sets correctly, making online ordering difficult.  But it’s okay, as long as you have the proper sku code, which allows you to go directly to the corret product page.  And that’s how I ordered this set and the other exclusive set from this wave.  Unfortunately, I seem to be smarter than tru’s online store, as they still sent me Wolverine and Shingen in place of this set.  And that’s not cool because Shingen kinda sucks.  Anyway, I ended up having to drive to my local TRU and exchange it.  Which is what I was trying to avoid.

Oh well, I have them now.  Which is good, because Harada was my favorite character in the film and I’d be bummed to have missed out on him.

#0048: Iron Man Mark VI – Hologram

Posted by Ethan Wilson in Reviews and tagged with , , , ,

IRON MAN MARK VI – HOLOGRAM

IRON MAN 2 (HASBRO)

So, wacky variants.  They tend to be a staple of action figure lines, particularly those that are based on films and such where the main character might only have one or two looks.  And that’s nowhere near enough for toy makers.  They have to make the kids buy them all!  They reached their heyday back in the 90sm most prevalently with Batman, but they still appear from time to time.

Case in point with today’s figure in question: The Holographic version of Iron Man’s Mark VI armor.  He hails from Hasbro’s tie-in line to 2010’s Iron Man 2.

THE FIGURE ITSELF

The Holographic Mark VI, or HMVI as I’ll be referring to him, was released as part of a K-Mart exclusive three pack of armors.  It featured a War Machine in camo, and an Iron Monger painted to look like the Hulkbuster armor, but I don’t have either of them.  HMVI is not based on a look from the Movie, instead being totally made up so that the toymakers could make another figure out of the same Mark VI mold.  He stands just shy of 4 inches tall and has 18 points of articulation.  The sculpt is exactly the same as that of the basic Mark VI.  The difference is that he was molded in clear blue.  He features some minor paint to give him some kind of a crosshatching detail, which is actually pretty cool.  He features no accessories, which is a bit of a bummer, but since Hasbro has a tendency to just throw in a dumb missile launcher, I don’t feel like I’m missing out on anything.

THE ME HALF OF THE EQUATION

I bought this figure for one and only one reason:  it looked really cool.  And it still does.  Sometimes, you just have to buy a toy because of how awesome it looks.  Perhaps the toy companies are on to something…

#0047: Iron Man & The Thing Minimates

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

IRON MAN & THE THING

MARVEL MINIMATES

Look!  It’s more Minimates!  Yes, I’ll be looking at even more Minimates, once again from the Marvel line.  This time I’ll be looking at a set from the “Best Of” sub series.  The idea behind this sub set was keeping the definitive versions of the main Marvel Heroes and villains on the market, while trying to produce the best possible minimates of those looks.  I’ll be taking a look at Iron Man and the Thing from that line.

THE FIGURES THEMSELVES

These guys were released as part of the first “Best Of” series of Marvel Minimates.

IRON MAN

First up is Iron Man.  He’s depicted in his classic red and yellow armor he wore for most of the 60s and 70s.  Unlike previous minimates of this particular look, the yellow is actually yellow on this one, instead of Gold.  Iron Man is built on the basic minimate body, so he’s about 2 ½ inches tall and has 14 points of articulation.  He features a sculpted helmet and belt, as well as sculpted boot and glove cuffs.  Paint-wise, the details are all well done, though some of the red paint is a little thin in places, and seems a bit fuzzy on the edges of the boots and gloves.  But since those are meant to be covered by the cuff pieces, it’s not really an issue.  Iron Man also features an extra left hand in a repulsor pose, a flying stand, and a hairpiece to display him sans helmet.  These are all reused pieces, but they work well here.

THE THING

Next is Benjamin J Grimm, The Ever-Lovin’ Blue-Eyed Thing.  Ben’s look is a bit more difficult to nail down than IM’s.  I think it’s meant to be Ben in his look from the mid 2000s, after he switched back to shorts from pants, but I can’t be certain.  The “4” on the belt buckle is throwing me off.   Anyway, he’s built on the basic minimate body, but with sculpted hands and feet instead of the regular ones.  As such, he stands a bit taller than IM and has 12 points of articulation.  In addition to the sculpted hands and feet, Ben’s other sculpted pieces are: Headpiece, upper arms, torso, waist and upper legs.  These are all slip over pieces, and have been used on previous Thing figures.  With that many sculpted pieces, the paint work on Ben is minimal.  He’s got detailing on his face, and on his belt and that’s about it.  They’re both clean and well done.  Ben also includes a clear display stand.

THE ME HALF OF THE EQUATION

I didn’t buy this set when it was initially released, as I already had a few classic Iron Men, and my default version of the Thing is the look John Byrne gave him in the 80s.  However, my comic book store was having a sale on minimates, and had these guys for about 40% off, so I decided to pick them up.  While the Thing is still not my go to, I think the Iron Man may very well become my new default Iron Man.

#0042: Tony Stark & Heartbreaker

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

TONY STARK & HEARTBREAKER

MARVEL MINIMATES

Hey, look!  It’s review number 42!  And it’s doubly funny, because the not only  is 42 the answer to life, the universe, and everything, but it’s also a significant number in this year’s Iron Man 3.  Today, I’ll be taking a look at another selection from my large Minimates collection.  This set once again comes from the Marvel Minimates line.  It’s Tony Stark and the Heartbreaker from the Iron Man 3 tie-in Minimates.

THE FIGURES THEMSELVES

These two were released as a Toys R Us exclusive set in Diamond’s Iron Man 3 series.

TONY STARK

Tony is depicted in his workshop gear from the film.  He’s built on the basic Minimate body, so he stands just over 2 inches tall and has either 14 or 12 points of articulation, depending on which pair of feet you decide to display him with.  He features sculpted hair, boots and gloves.  The hair piece is a generic piece that’s been used a few times before, but it’s accurate to Tony’s look from the film, so it works.  The boots and gloves are reused from the Mark 42 armor from this same wave of figures.  It’s a sensible reuse, given that they were just the boots and gloves from the Mark 42 in the film anyway.    Tony also includes a spare set of hands and feet.  They’re the basic Minimate pieces, molded/painted in the appropriate colors.  The rest of the detail on the figure is conveyed through paint.   The face is an okay depiction of RDJ, and is unique in that it has him wearing his control visor.  The detailing on the torso is also really cool, especially the texturing on the gray parts of the shirt.  Tony’s rounded off by a clear display stand.

HEARTBREAKER

The Heartbreaker armor is one of the many armors shown during the climactic battle in the film.  It’s a unique look, and one of my favorites from the film, so it was a good choice for the line.  The figure’s built on the base Minimate body, but with newly sculpted upper arms and legs.  He stands about 2 inches tall and has 12 points of articulation due to his sculpted boots.  Heartbreaker features a sculpted helmet, torso-cover, waist-armor, gloves and boots.  As far as I can tell, everything but the boots is a new sculpt.  The sculpt is nice and clean, if a bit bulky in places.  The paintwork is a bit less detailed than most Minimates, relying mostly on the sculpted pieces.  Heartbreaker also includes a hair piece to trade out with the helmet to show the Tony head underneath.  It’s the same piece as the one featured on the Tony in this set which makes for good consistency.  Like his pack mate, he’s rounded off by a clear display stand.

THE ME HALF OF THE EQUATION

These were yet another TRU.com purchase.  Like many TRU purchases, it was far from smooth.  In fact, if it weren’t for a very helpful poster on the Minimate Multiverse, who posted the SKUs for each set in the wave, I wouldn’t have been able to get this set, because TRU.com had every set in the wave labeled “Iron Man 3 Minimates Assortment”!  I’m really glad that I did get this set because I think it might be my favorite from the Iron Man 3 line.  In fact, one could say not getting this set would have been …heartbreaking!(Badumsh)