Tag Archives: Spider-Man (Toyline)

#0626: Shocker

Posted by Ethan Wilson in Reviews and tagged with , , , ,

SHOCKER

SPIDER-MAN: THE ANIMATED SERIES (TOYBIZ)

Shocker1

Spider-Man definitely has one of the best rogues galleries around. Maybe it’s not as cool as Batman’s (though that mostly falls to personal opinion), and sure, for my money, it doesn’t quite have the same flare as the Flash’s, but it’s definitely a strong contender. Of course, with every rogue’s gallery comes the inevitable selection of less than threatening entries. Those, by the way, are my personal favorites. I love the lower tier guys. My favorite Batman villain is Calendar Man for God’s sake! So, I have a real appreciation for them. One of the Spider-Man foes who has never really managed to be anything more than a nuisance is the Shocker, eternal punching bag.

THE FIGURE ITSELF

Shocker2Shocker was released in the third series of ToyBiz’s 90s Spider-Man line. The line was designed as a tie-in to the cartoon of the same time, and as such, the characters drew from their animated designs. Fortunately, Shocker was pretty much unchanged from the comics, so this is just a fairly basic classic Shocker figure. The figure stands just over 5 inches tall and features 7 points of articulation. That’s less articulation than was usual at the time, due to the figure’s action feature preventing him from having elbow joints. And what was this feature? It was dubbed “Shooting Power Blasts” on the box; in reality, he comes with two red missiles, which pop into the spring-loaded arms and can be “launched” by…well, just letting them go. The springs have no locking feature, so the missiles just launch as soon as you let go. Also, the feature doesn’t really make much sense for Shocker. His powers are based on vibration, so he doesn’t actually blast anything. I don’t know. Shocker featured a sculpt that was unique to him. It’s in line with the rest of the figures in the series; the details are rather simple, and the proportions are slightly boxy. He’s a little pigeon-toed, but not excessively, and due to the action feature, his arms are really straight and stiff. That can’t be a comfortable position. Still, the sculpt isn’t bad, and it does a pretty good job of translating Shocker’s design into three dimensions. Shocker’s paintwork is also pretty simplistic, with basic color work. Most of its pretty clean, but the silver areas seem especially prone to bleed over. The figure included the two missiles to go with the action feature and nothing else, though I can’t say I know of anything Shocker would really need to include.

THE ME HALF OF THE EQUATION

Like the vast majority of the 90s Marvel stuff I’ve been reviewing as of late, Shocker was purchased from a vendor at this year’s Balticon. I missed out on a lot of the Spider-Man stuff growing up, mostly due to me not liking Spider-Man: The Animated Series as much as the other cartoons of the time. That said, I still appreciate the series, and I love Spidey’s rogues gallery, so I’m glad to be filling some holes in my collection. Shocker’s not a perfect figure, but he’s fun enough to make the purchase worthwhile.

#0527: Green Goblin

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

GREEN GOBLIN

SPIDER-MAN (TOYBIZ)

Alright guys, after a brief stop over into the strange bizzaro world of The Stapler in Question, we are back at home with the action figures. Yay! So, back in the 90s, the 5-inch scale Marvel figures, produced by the very much at the height of their game ToyBiz were totally my jam. The figures were (at least loosely) based on the then current cartoons. Amongst those cartoons was Spider-Man: The Animated Series, which ended up with a fairly nice toyline of its own, at least for a few series. So, let’s have a look at one of Spidey’s greatest foes, the Green Goblin, as he was presented in said line.

THE FIGURE ITSELF

GreenGoblin90sWilsonGreen Goblin was released as part of Series 3 of ToyBiz’s Spider-Man line. The cartoon did this odd thing where Hobgoblin preceded Green Goblin, which resulted in Hobs taking the Goblin slot in Series 1. And Goblins never go for even numbered series. That’s just not how they roll. The figure is about 5 inches tall, with 9 points of articulation. He’s pretty much standard for a ToyBiz figure of the time. He’s based on the character’s animated appearance, which itself was a fairly faithful recreation of the comics design. Mostly, it just comes down to style cues, resulting in a slightly “friendlier” looking Goblin. Surprisingly, Green Goblin got his own sculpt, which shared no pieces with Series 1’s Hobgoblin. I think that may be the only time these two have both appeared in a line with no re-use at all. Impressive. The sculpt itself ends up being quite impressive, with not only some pretty good proportions, but also some killer texturing, especially on the scaly arms and legs. They aren’t super-detailed like some of the sculpts that followed, but they are a great example of using just enough detail to suggest the rest (which, incidentally, is how Goblin was drawn for most of his classic appearances). Also, it’s an odd thing to point out, but this figure has some of the best hand sculpts of any figure from this time. Most were molded in a generic clasping positon, but Goblin has one splayed as if it’s just thrown a pumpkin bomb and one in a pointing position. I don’t know what he’s pointing at, but at least it’s different. Goblin’s paintwork isn’t quite up to the same level as the sculpt, but it’s pretty much on par with just about everything else being offered at the time. The colors match up pretty well to the show’s design. The colors don’t so much match up to themselves, however. The purple ends up changing a few times over the course of the figure, which is rather distracting. There is also some rather noticeable bleed over around the edges of the gloves and boots, and the edges on the shorts aren’t even close to being even. Green Goblin included his faithful goblin glider (which even launched missiles) and a pumpkin, but pesky child-Ethan lost them! (Or did he?)

THE ME HALF OF THE EQUATION

As into the ToyBiz Marvel stuff as I was as a kid, I actually ended up avoiding a lot of the Spider-Man line. The cartoon never really gripped me like the others, so I just never really had the connection. So, Goblin here wasn’t part of my “initial collection.” He was a later acquisition, fished out of a bin of low priced figures at a nearby comic book store sometime around the mid-00s. I don’t know exactly why I picked him up, but I imagine I was just filling in some gaps in the collection at low prices. Going back to review this guy, he surprised me. With most of the 5-inch figures, the nostalgia filter is firmly in place, but not for this one, and yet he still impressed me. That really says something.

#0186: Kraven The Hunter

Posted by Ethan Wilson in Reviews and tagged with , , , ,

KRAVEN THE HUNTER

SPIDER-MAN: THE ANIMATED SERIES

Remember my review of Unmasked Spider-Man from just last week? Good, that means this intro can be a bit shorter. Like that figure, this one hails from ToyBiz’s Spider-Man: The Animated Series line from the 90s, and also comes from one of the boxed sets ToyBiz released exclusively through BJ’s Wholesalers. This time around, it’s Kraven the Hunter, one of the classic Spider-Man foes. He was a hunter looking for a more exciting hunt, which led to him fighting Spidey on numerous occasions and eventually joining the first incarnation of the Sinister Six. Let’s see how he turned out!

THE FIGURE ITSELF

Kraven was released in the BJ’s exclusive Monster Mayhem set, which also included 5 other figures, all repaints. Kraven stands about 5 inches tall and has 9 points of articulation, which were both standard for the line. Kraven is 100% re-use, being a repaint of the main Spider-Man line’s own release of Kraven. The previous Kraven was based on his cartoon appearance, whereas this one seems to be more comic based. The biggest difference present is this figure’s leopard patterned pants in contrast to the previous figure’s black pants. The sculpt is a pretty good one, and is pretty in line with the classic Kraven design, so I can’t blame them for re-releasing it in a more comic accurate palate. The paint work is well applied and clean overall, and it appears to be a bit more detailed than the single release figure. Kraven included no accessories, which is a shame, because his hand is obviously molded to hold one.

THE ME HALF OF THE EQUATION

I acquired this BJ’s exclusive at KB Toys. Yes, you read that right. Apparently, BJ’s would only actually hold on to these sets for a short while before selling them to KB for the rest of the distribution. Hey, it works for me. Anyway, I was on a trip to the beach, I think right before my brother was born, but I don’t recall for certain. My dad took me to the nearby KB and they had this set there. I had known about its existence, thanks to the internet, but I hadn’t seen it in person. I remember being pretty happy to get it, though it wasn’t really for Kraven. Still, he’s a decent figure, and does help bring back the memories of getting the set.

#0169: Captain America

Posted by Ethan Wilson in Reviews and tagged with , , , ,

CAPTAIN AMERICA

SPIDER-MAN: THE ANIMATED SERIES (TOYBIZ)

By the time this review is posted, I will have seen Captain America: The Winter Soldier.  I’m hoping that I love it as much as I am expecting to, but I’ll just have to wait and see (EDIT: I saw it!  It was amazing.  Go check it out!).  In the meantime, to celebrate the release of the movie, I’ll be taking a look at my very first Captain America action figure.  Back before Cap was the household name he is now, the only way to get a Cap figure was in the tie-in line to the Spider-Man cartoon, of all places.  Cap had just made an appearance on the show, so Toybiz was gracious enough to put him in the eighth series of the line, dubbed Electro-Spark.  How does the figure hold up almost 20 years later? Let’s find out!

THE FIGURE ITSELF

The Spider-Man line was 5 inch scale, but Cap was a big guy, standing almost 6 inches tall and featuring 9 points of articulation.  Toybiz seemed intent on depicting Cap as quite the hulking figure (not that one).  He’s so big, it’s almost like his super-soldier serum took super-soldier serum.  This was not a Cap you wanted to mess with!  The sculpt had some nice touches, particularly the scale texture on Cap’s torso, which is simple, but very effective.  The gloves and boots also show a nice level of detail.  There’s lots of folds and creases, making them stand out nicely.  The face depicts Cap in a very angry state, which wouldn’t be my first go to for the character, but it was the 90s.  Everybody gritted their teeth like that.  The paint work on Cap was simple, but it fits with the time, and it was fairly cleanly applied.  I quite like the stylizing of the “A” on the forehead.  Cap included his mighty shield, though this is probably my biggest issue with the figure.  The shield was reworked to give it some sort of light-up feature, which means it’s really small and like an inch thick. Plus, the star’s not even the right color!

THE ME HALF OF THE EQUATION

As I mentioned in the intro, Cap was my very first figure of the character.  It was also the only version available for a few years, so this is what I had to live with.  The figure is probably one of the most dated sculpts of the old Spider-Man line, but I can’t help but love it.  I guess I just got used to what I had.  AS a kid, there was no thrill like getting to watch my VHS copies of the Ruby-Spears Captain America cartoon while holding this figure.

Read the Flashback Friday Figure Addendum for this guy here!