Tag Archives: Star Wars

#2706: Mace Windu

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

MACE WINDU

STAR WARS: THE BLACK SERIES (HASBRO)

“A grim Jedi Master with an amethyst-bladed lightsaber, Mace Windu was the champion of the Jedi Order, with little tolerance for the failings of the Senate, the arguments of politicians, or the opinions of rebellious Jedi.”

Mace Windu was one of the few not-hold-over-from-the-original-trilogy characters of the prequels to be of notable prominence, not just in one of the three films, but in the whole trilogy, even before Clone Wars came along and fleshed the others out a bit.  As such, he was also decently covered in the area of toys.  It came as a slight surprise when it took as long as it did for him to make his way into The Black Series, but he finally did, and I’m taking a look at that figure today.

THE FIGURE ITSELF

Mace Windu was an early 2019 release for The Black Series, released as part of the same assortment that included Padmé and Dryden Vos.  He was figure #82, placing him right between Padmé and the standard Battle Droid.  The Jedi all kept the same basic looks through the prequels, but Mace was even more consistent than the others.  This one serves as coverage for both his Episode II and III looks, since they were more or less the same.  The figure stands 6 1/4 inches tall and he has 29 points of articulation.  I’ve actually looked at most of Mace’s parts previously, when they were re-used for Plo Koon.  It was a good sculpt then, and it’s a good sculpt now.  It’s well constructed, and the articulation is quite nicely implemented.  He’s got all the range and motion of the newer Black Series offerings, so he’s a lot of fun to pose.  Obviously, the head and hands are different, so as to be more Mace-appropriate.  The head’s got a pretty darn solid Samuel L Jackson likeness, and probably one of the better likenesses from the line.  In general, the likenesses in this assortment were really strong, as I thought Dryden was up there as well. Also, I dig that the hands aren’t just two basic gripping poses; the left hand’s gesture pose has a lot of possible posing range to it.  Mace’s paint work is all pretty straight forward stuff.  The head has the face printing, which looks quite nice on this particular sculpt.  The robes and such are all basic work, but they’re up to snuff.  No noticeable slop or bleed over, so that’s good.  Mace is packed with his lightsaber and a removable cloth robe.  The saber is nice, but I was a little bummed that he couldn’t hang it from his belt.  The cloak’s about on par with the majority of the other cloth goods from the line, which is to say it’s not amazing, but it’s not terrible either.  It’s certainly better than the one that came with Plo.

THE ME HALF OF THE EQUATION

As I discussed in my review of Padmé, this assortment was the last one before All Time was carrying the line, so I missed out on most of them at retail.  I wanted a Mace to be sure, but just never had the opportunity to get my hands on him.  Fortunately, Hasbro did another production run on him and a handful of other figures, and they’ve just started to show up.  Mace is a really good figure, and certainly one of the line’s best Jedi figures.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2705: Clone Commander Fox

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CLONE COMMANDER FOX

STAR WARS: THE BLACK SERIES (HASBRO)

“Commander Fox led the Coruscant Guard, an elite clone trooper unit assigned to serve as peace-keepers on the Galactic Republic capital.”

With all of the new Archive releases covered (or substituted for the earlier release, as was the case for Cody), I guess I’ll fill this week out with a couple of older releases that I have on hand.  The photo at the end of yesterday’s review may have cued some readers into the fact that I have Clone Commander Fox, but I have not yet reviewed Clone Commander Fox, so I guess I might as well get on that.  How about this here Commander Fox figure?

THE FIGURE ITSELF

Clone Commander Fox was a shared retailed exclusive Black Series release from 2019.  Technically, he was a GameStop/Thinkgeek exclusive, but he was also offered up through Big Bad Toy Store, so he was rather thoroughly distributed.  Fox’s design follows the trend for all of the Clone Commanders’ designs so far, going for his Phase II design.  The figure stands 6 1/4 inches tall and he has 29 points of articulation.  Fox is built on the standard Clone Trooper body, for better or for worse.  That’s overall a good thing, but it does mean that he’s got some slight issues regarding range of motion on his joints, as well as the lack of a trigger finger on his left hand, for the purposes of dual wielding.  He’s got the adjusted belt with the holsters like we saw on Wolffe and Rex, along with a cloth kama piece to match.  The kama still seems a little short, no doubt due to using the same pattern as the other two.  Fox gets a new helmet piece, which is rather similar to Cody’s but lacks a couple of Cody’s specific details.  The standard portions of the helmet match up in style with Cody’s helmet, indicating that they at least started from a common point.  The visor, which is a separate piece on both, is a notably softer plastic here, which causes it to be slightly warped on my copy of the figure.  It’s not terribly so, but it’s noticeable.  Fox’s paint work is pretty nicely handled.  The base work is pretty clean, and the predominantly red coloring helps him stand out.  There’s a lot of fun detail work going on, with some notable wear and tear on his armor.  It gives him a realistic vibe, which works pretty well.  Fox is armed with a DC-15A long rifle and a pair of DC-17 pistols.

THE ME HALF OF THE EQUATION

I’ve pretty much thrown in the towel on resisting getting any of the Clone Commanders, so I knew I wanted Fox as soon as he was shown off.  That being said, it being Fox, I wasn’t in a major rush or anything.  I actually wound up picking him up from an All Time trade-in, back before I even got yesterday’s Cody figure.  I just kept putting off reviewing him because, you know, life, and all.  But, I figured, with Cody finally getting reviewed, I might as well clear out all of the Clone reviews on deck.  Fox isn’t the most impressive of the Clones, but he’s got a distinctive look, and now I’ve got a red one, so that’s cool.

#2704: Clone Commander Cody

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CLONE COMMANDER CODY

STAR WARS: THE BLACK SERIES (HASBRO)

“A natural and practical leader in the clone army, Clone Commander Cody was a good fit for General Kenobi, to whom he was particularly loyal.”

While they’ve stepped it up a little bit in the last few years, when The Black Series launched, the prequel component was pretty light.  In the first three years of the line, there were only seven prequel figures, four of them being Clone variants of some form or another.  Just prior to wrapping up the line’s second incarnation, just before the re-branding for The Force Awakens, they put out their first actually named clone, Commander Cody, who was in an otherwise OT-based assortment.  He was easy to overlook at the time, but as we’ve gotten more and more of the other Clone Commanders, he’s become rather a desired entry in the line.  Thankfully, he just got a re-release as part of the Archive line-up.  Not that I’m reviewing that release here, but I’ll get to that later.  Onto the figure!

THE FIGURE ITSELF

Before being re-issued in the third assortment of The Black Series Archive, Commander Cody was originally released in early 2015, as #14 in the Blue Line incarnation of The Black Series, heading off the final assortment of that incarnation (alongside the previously reviewed Leia as Boushh and IG-88).  The figure stands 6 1/4 inches tall and has 29 points of articulation.  Cody is built on the the original Clone Trooper body.  He got a new head, upper torso, shoulder pads, and upper right arm in order to replicate Cody’s more personalized armor elements.  The original Clone body does show its age these days, but it was still quite good for the time, and it’s certainly not terrible.  Cody’s new shoulder pads even address the issue with the standard body by giving him a slightly better clearance, and thereby a better range of motion on those particular joints.  The Cody-specific parts are all really nicely sculpted, and have quite a lot of deep detail work.  His armor shows some more wear and tear than the rest of the Clones, which is appropriate for the character.  By far my favorite piece is the head, which manages to be a nicer, sharper recreation of the Phase II helmet than the standard one that later followed, with deeper detailing, and a far better range of motion on the neck joint than the regular helmet as well.  Cody’s paint work is pretty solid; while the pre-TFA stuff had some issues with paintwork, there was a real reversal on this final assortment before the switch-over.  Cody followed that set up, and actually has some decent work.  The orange stripes on his main armor have some nice simulated wear, and the knee pads have some cool accenting to make them look dirty and messed up.  The white sections of the armor could perhaps use some slight accenting to bring out some of the sculpted damage, but accenting on white can be very tricky, so it’s probably for the best that it was just left out.  Cody is packed with both the DC-15 and DC15A blasters, which have become the norm for the Clones.  Interestingly, his helmet isn’t removable like some of the later Clone Commanders, despite Cody rather prominently taking off his helmet in his film appearance.  Ultimately, it’s probably for the best, however, since it means that this figure doesn’t have the older style paint on the head to contend with.

THE ME HALF OF THE EQUATION

I passed on this guy when he was new because I was far more focussed on the other two figures in the set, and I was still trying to hold to my no prequels rule.  However, once Hasbro really started getting into the other Clone Commanders, I definitely regretting passing on him more and more.  Back over the summer, All Time had this guy come in with a whole Black Series collection, and I was interested, but the Archive was not yet announced, and that meant he was at the peak of his after market value.  That was outside my price range, so I passed, albeit somewhat disappointedly.  Max was evidently having none of that, and decided to be far to nice to me, and got me this guy anyway.  Sure, the Archive release is out now, but that doesn’t make how I got this one any less special, nor does it change the fact that I had him for a good six months before there was another opportunity.  Whichever release you get, this guy is really cool, and I’m glad to have him to round out the set.

#2703: Han Solo – Hoth

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

HAN SOLO — HOTH

STAR WARS: THE BLACK SERIES ARCHIVE (HASBRO)

“Han stuck with the Rebel Alliance and helped establish its new base on the ice planet Hoth. After Luke didn’t return from a routine sweep of the planet surface, Han headed out alone into the frigid cold to find him.”

Luke wasn’t the only one to get the deluxe Hoth cold-gear treatment for The Black Series in 2015, and he’s likewise not the only one to get the Archive treatment in 2021.  Both times around, Luke was accompanied by his good buddy Han, in his own set of cold-weather gear.  And I’m taking a look at that Han figure today!

THE FIGURE ITSELF

Han is another figure in the third assortment of Star Wars: The Black Series Archive.  Like Luke, he too was originally released in a deluxe set in 2015, where he was originally packaged alongside a Tauntaun.  Unlike Luke, he’s one one release between these two; the figure got a head swap and was packed with Hoth Leia for a two-pack in 2018.  The figure stands 6 1/4 inches tall and he has 25 points of articulation.  Han’s articulation scheme is rather similar to Luke’s, being a rather archaic offering compared to other figures.  The mid-torso joint works a bit better on this guy than on Luke, at least, but otherwise, it’s pretty much the same, right down to the cut joints for the wrists.  Han’s sculpt is a straight re-use again.  It’s not the worst sculpt, but it’s far from one of Hasbro’s best.  The actual body’s not bad; the details are a bit sharper than Luke’s, and the proportions aren’t quite as off.  The real issues have to do with the head.  Firstly, like a number of the Han heads, it sits too high on the neck joint.  The actual head is actually made up of three separate pieces, for the head/hat, the hood, and the goggles.  This is accurate to the film, and gives the sculpt some extra depth, but introduces its own set of problems.  The main head is rather under-scaled when compared to the rest of the body, presumably to compensate for all of the other parts.  The face has an okay likeness of Ford, at least.  The hood and goggles are decent pieces in their own right, but in the case of the hood, designing it to be removable costs the aesthetics a bit.  There’s a rather noticeable seam on the back of the hood where it’s designed for removing, and due to the head sitting as high on the neck as it does, it doesn’t actually sit flush with the rest of the coat.  Since it’s, you know, supposed to be the same garment, and all, that’s kind of a big deal.  With careful posing, it doesn’t look quite as bad, but it’s still off from every angle no matter what.  It all winds up being a rather silly venture anyway, since there’s no reason to actually remove the hood, since it’s not a look that’s ever seen in the movie, and it really just ends up looking goofy.  Without an alternate head, or a hood piece pulled down, there’s no practical reason for the hood to be a removable piece.  He’d be better off with the hood permanently attached.  The figure’s paint work is a notable change-up from the original release.  In addition to getting the face printing to differentiate him from the original release, this figure also takes the opportunity to correct the jacket’s color from the blue of the original release to the proper brown.  The 2018 release made this change too, but this is the first time we’ve gotten the hood in the right color.  Han is packed with his usual blaster pistol.  It’s a little light, but it’s consistent with what he originally had (minus the Tauntaun, of course).

THE ME HALF OF THE EQUATION

Han’s original release was the same deal as Luke, being more difficult to find, lower quality, and just a bit too expensive at the time.  I did *almost* get one during Amazon’s first Prime Day, when he went on sale, for something silly like $5 off, but, again, it was hard to make it worth my time.  I mostly snagged him because I was getting Luke.  Honestly, he’s not as good as the already rather mediocre Luke figure.  The hood and head is a huge issue, and in general, he’s just not a terribly fun figure to mess with.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2702: Luke Skywalker – Hoth

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

LUKE SKYWALKER — HOTH

STAR WARS: THE BLACK SERIES ARCHIVE (HASBRO)

“While on patrol, Luke and his tauntaun are attacked by a vicious wampa. The creature hangs Luke upside-down in its cave, but Luke uses the Force to escape.”

Luke has been no stranger to variants in Star Wars: The Black Series.  As a rather major character in the franchise, I guess that’s pretty fitting.  His major variants largely hit earlier in the line’s run, generally a good deal before the rest of the others in their matching attire.  That has a tendency to drive the prices of said matching looks up a bit.  Fortunately, with the introduction of the Archive sub-line, Hasbro’s got an okay way of getting them back out on the market.  One of the more notable looks that gone without a follow-up was Luke’s cold weather gear from Hoth, which is the Luke variant for the latest round of Archive figures.

THE FIGURE ITSELF

Luke is from the third assortment of The Black Series Archive, re-releasing a figure that was originally put out in 2015, packaged alongside the Wampa in the deluxe portion of the Blue Line iteration of the brand.  The figure stands about 5 3/4 inches tall and he has 25 points of articulation.  Luke’s articulation scheme is rather on the archaic side compared to newer offerings.  The range on a lot of the joints is far more restricted, and they tend to break up the sculpt a lot more than on recent figures.  The arms in particular suffer from both a lack of proper elbow movement, and from a curious lack of anything beyond cut joints for the wrists, which is just unheard of for the line.  A lot of this is due to the figure’s nature, beign built out of parts that are over five years old at this point.  Moreover, Luke is unfortunately from the line when it was kind of at is lowest, before Hasbro really found their footing again.  It’s rough to say the least.  The actual sculpting work’s not awful, at least.  Luke’s seen here post-wampa attach, so his goggles are missing, and he’s got some sculpted scarring on his face.  The face has a pretty decent likeness of Hamill, especially for earlier in the line.  The detail work on the gear is passable, though a touch softer than more recent releases tend to be. His head scarf is a cloth piece this way, which works better from a posing stand point, though it does wind up looking a bit flat and devoid of detail.  Luke’s paint work is generally pretty basic.  It could probably stand to have a little extra accent work, to bring out some of the sculpted details a little better, bit everything important is there.  There’s some slop on the edges of a few spots.  The belt buckle’s slightly misaligned and the skin tone of the the neck doesn’t quite cover the whole area it’s supposed to.  Luke gets the face print set-up in place of the original paint scheme, which is in some ways better, but not quite as hefty an improvement as it usually is.  Notably, it misses out on the blood detailing for the scarring, which was on the prior release.  Additionally, the eyes just don’t look quite right.  At first, I thought I just got a misaligned copy, but all of the ones I looked at were the same, so it looks to be line-wide.  It looks alright from a distance, but up close it looks weird.  In terms of pack-ins, Luke is obviously without the Wampa he was originally packed with, but he gets the lightsaber and blaster from the prior release.  The blaster’s pretty decent, but the lightsaber is of a notably lower quality than other versions; the hilt is molded in silver rather than painted, and the whole thing is a softer plastic than usual, causing the blade to pop out a lot easier.

THE ME HALF OF THE EQUATION

Luke’s original release marked the period when the line was hardest to fine and generally at its lowest quality, which made it rather hard to stay invested at the time.  That, coupled with the higher Deluxe price point had me steer clear of this guy the first time around.  With all of the other Hoth figures as of late, I’d been hoping for an update or something.  Here’s an “or something”, I guess.  Given the era of the line this sculpt comes from, it’s about what I’d expected.  The articulation’s not ideal, and the sculpt could probably stand to be a little sharper.  In general, he just feels sort of half-formed.  The new paint does a little bit to dress him up, but ultimately, it feels out of place in the modern line.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2694: Ben (Obi-Wan) Kenobi

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BEN (OBI-WAN) KENOBI

STAR WARS: POWER OF THE FORCE II (HASBRO)

“Legendary among the heroes of the Rebel Alliance, Ben (Obi-Wan) Kenobi is regarded as one of the greatest Jedi Knights ever to have lived. As a young Jedi who had just completed his own training, Obi-Wan made a solemn pledge to train young Anakin Skywalker in the ways of the Force. Anakin became a Jedi but then turned to the dark side and became Darth Vader. Many years later, destiny would have an older and wiser Obi-Wan guiding Anakin’s own son, Luke Skywalker, in the ways of the Force, and ultimately, in turning Vader back to the light side.”

Last week, I took my first dive into the Power of the Force Flashback Photo subset of figures, and rather poked fun at the concept and how far of a reach some of those figures were for the idea.  Well, in their defense, some of them did make at least some bit of sense.  Given that it was to tie-in with the first of the prequels, and there were actually some crossover characters, showing those characters from the original trilogy, and offering the flashback there?  Not the worst idea.  Among the cross over characters was Obi-Wan Kenobi, who I’m taking a look at today.

THE FIGURE ITSELF

Ben (Obi-Wan) Kenobi, as he is so specifically named on the box, was part of the first set of “Flashback Photo” Power of the Force figures, hitting towards the end of 1998, just as we were getting prepped for the new movie.  He was our fourth Obi-Wan from the line, and only the second to be part of the regular line.  The figure stands 3 3/4 inches tall and he has 10 points of articulation.  This would mark the first real move to improve the articulation on these figures, as Obi-Wan wound up with a whopping three joints in each of his arms.  Sure, they were all cut joints, and sure, the rest of his movement was majorly restricted by the robes, but it certainly was a step up.  Also of note was the fact that this was the first Obi-Wan not to be based on the first PotF figure’s molds, making him generally less oddly bulked up and weird looking.  He’s still a little more bulked up than Sir Alec Guinness actually was in the movie, but it’s not quite as insane.  Preposing is a bit more involved this time, with the figure being designed to directly interact with the “Flashback” Vader figure, in an effort to recreate their duel from A New Hope.  With the extra articulation, there’s a little more variety as to what you can do, though it’s still not a ton.  Honestly, the screen accurate thing wasn’t the worst concept, and it does at least make him a little more unique compared to others in the line.  It’s not a bad looking sculpt, either, and they were really starting to get the hang of making the clothes look fairly natural on the bodies.  The hood in particular doesn’t look too bad, and hoods are usually pretty darn tricky.  The only downside is that the hands have some difficulty holding the lightsaber, which does somewhat hinder his purpose.  In terms of paint work, Obi-Wan is about on par with the rest of the line, so he’s basic, but generally pretty well handled.  All of the important details are there, and they’re pretty cleanly applied.  Obi-Wan is packed with his lightsaber, which is about all he really needs.  Of course, he’s also got the Flashback Photo, which is about as intriguing here as it was with Beru.

THE ME HALF OF THE EQUATION

All of the Flashback Photo figures passed me by as a kid, just because there wasn’t actually much new coverage there.  This one in particular proved frustrating for me as a kid, because I just wanted a prequel Obi-Wan figure, and I kept finding this one, and he wasn’t really what I wanted.  Admittedly not really the figure’s fault, I suppose.  I wound up getting him this past fall when he was traded into All Time.  He’s not a bad little figure, and is probably this line’s best version of Obi-Wan.

#2690: Grand Admiral Thrawn

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

GRAND ADMIRAL THRAWN

STAR WARS: THE BLACK SERIES ARCHIVE (HASBRO)

“Thrawn was a male Chiss, known for his brilliant strategic mind and ruthlessness, he was determined to ‘pull the Rebels apart piece by piece’ for the Empire.”

Late last year, I did my first review centered on Grand Admiral Thrawn, a rather notable character in the Star Wars Expanded Universe, and one of the first elements from the old EU to be officially canonized by Disney following their take-over of the franchise.  Thrawn’s inclusion in Rebels netted him a couple of new figures, a feature in Star Wars: The Black Series included.  Thrawn was originally an SDCC release, and then got a standard release alongside the first chunk of Last Jedi items in late 2017.  Both of them proved rather scarce even at the time, and in light of the rest of the Rebels figures getting re-released over the fall, Thrawn was in dire need of some sort of reissue.  Thankfully, Hasbro’s Archive series is here to the rescue on that one.

THE FIGURE ITSELF

Grand Admiral Thrawn is part of the four figure line-up that makes the third series of The Black Series Archive.  Thrawn, like the rest of the Rebels figures, is designed to be a real world approximation of his animation model.  The figure stands 6 1/4 inches tall and he has 27 points of articulation.  Structurally, this figure is, of course, identical to his original two releases.  Additionally, his articulation scheme follows the set-up of the other Imperial Officers we’ve gotten in the line.  Interestingly, however, he’s got no parts in common with any of those figures.  Presumably, it’s in order to make Thrawn a little taller than the other Officers.  Whatever the case, it’s a good sculpt, and matches the other officers well, while still adding a bit more variety to the Officer’s line-up.  Compared to some of the more recent figures in the line, his articulation is a little bit restrictive (the vast improvements really started to hit just after this guy was released), but it’s certainly enough for the sorts of poses you’ll be putting Thrawn into.  Thrawn’s head sculpt is a solid translation of his animated design into a more real world appearance.  Like with Hera, the more alien elements do seem to aid a bit in the transition, so he doesn’t wind up looking quite as wonky as Kanan or Ezra.  Thrawn’s paint work is generally pretty cleanly handled.  It’s mostly pretty basic work, but the application’s pretty sharp.  The one notable change-up for this release is the transition to the printing technique on the face.  It’s not as drastic a change on Thrawn as it is on other figures, but it’s a touch more lifelike and generally looks quite nice.  Thrawn’s only accessory is a small blaster, which he can hold, or stow in his holster.

THE ME HALF OF THE EQUATION

I missed out on Thrawn the first time around.  I don’t believe I ever actually saw him in person, and, admittedly, I wasn’t really looking, since I hadn’t really had any exposure to the character at the time.  I’ve subsequently read a bit of Timothy Zahn’s work with the character and watched through Rebels, which left me really wanting to have him in figure form.  Thankfully, the Archive release hit just at the right time for me, allowing me to finally put this updated version of the character on the shelf.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2687: Aunt Beru

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

AUNT BERU

STAR WARS: POWER OF THE FORCE II (KENNER)

“Beru Lars was the closest thing to a mother that Luke Skywalker ever knew. She and husband Owen lovingly raised Luke as their nephew, and trained him in the mundane ways of moisture farming on their arid Tatooine homestead.. All along, Aunt Beru understood that a larger destiny awaited Luke. Years before, on another part of Tatooine, the slave Shmi Skywalker raised the boy who would become Luke’s father-Anakin Skywalker. Like Aunt Beru, she sadly understood she could only love and nurture her boy for a relatively short period of time before she had to allow him the freedom to fly on his own wings.”

I know what you’re thinking: “Why does Shmi Skywalker get mentioned in Aunt Beru’s bio?  Isn’t that a weird reach?”  Yes.  Yes, it is.  But it’s okay, because weird reaches are something that defined this particular branch of the Power of the Force line.  In celebration of the upcoming Prequel Trilogy, Hasbro (who was once again putting their name on action figures, after deciding to shut down their Kenner division) decided to celebrate in the best possible way you can when you can’t actually release anything from the movie you’re promoting: awkward, forced tie-ins.  Instead of actual Episode 1 based product, they produced the “Flashback Photo” figures, a set of Original Trilogy figures that each had a tie to someone from the new movie.  Figures like Vader, Obi-Wan, R2, or 3PO all made sense, being in both sets of movies and all, but what of other characters?  Well, you get pairings like Beru and Shmi, who aren’t related, and don’t actually interact on-screen….but, I guess they’re sort of similar?

THE FIGURE ITSELF

Aunt Beru was added to the Power of the Force line in 1999, as part of the second round of the “Flashback Photo” figures that were leading into the new film.  This was Beru’s first figure (not an exceptional shock, really), and remains the only OT Beru figure we’ve ever gotten.  Clearly she’s overdue for Black Series treatment, right?  Riiiiight.  The figure stands 3 3/4 inches tall and she has 6 points of articulation.  She’s rather limited on the mobility front, due to the harder plastic skirt, but it’s Beru; it’s not like she was exactly action oriented.  Her sculpt was an all-new thing, and it’s actually a rather nice offering.  The proportions are fairly balanced and realistic, and pre-posing is kept to a minimum.  Her outfit is fairly well detailed, and she’s even got a halfway decent likeness of actress Sheila Mary Fraser.  Generally, just pretty good sculpting for the time when you get down to it.  Additionally, the paint work’s not too bad either.  Mostly, it’s flat base color work, but there’s some decent work on the pattern of her collar, and the accenting on the hair also works quite well.  Beru’s real selling point is the accessories.  She gets the best ever accessories for an Aunt Beru figure: a pitch and cup of blue milk!  It’s kind of a signature thing, so it’s nice they put it in there.  Hasbro obviously knew that old woman in a sensible jacket and dress serving a good, calcium building beverage wasn’t going to fly off shelves, so they packed Beru with one of the Lars family Service Droids.  Though simply dubbed “Service Droid” on the package, this guy is actually a WED-15-77 Treadwell droid, which is a somewhat recurring type of droid from the films and expanded universe material.  Treadwell even has a single joint at the base of his treads, and a spot for keeping the milk, making him the perfect companion piece to Beru.  Lastly, there’s the “Flashback Photo” piece, which is really just an extra piece of packaging that you’d be forgiven for immediately throwing away.  It’s a picture of Beru on a set of shutters; pull the tab down, and they flip to show Shmi Skywalker.  Thrilling.

THE ME HALF OF THE EQUATION

This is one of those oddball releases that isn’t really ripe for buying as a kid…so I didn’t.  She got traded into All Time over the summer, and I snagged her then, as I continue my quest of getting all of Power of the Force.  Honestly, while she may not be the most thrilling character, Beru is a better figure than you might expect, and holds up surprisingly well for this line.  For me, though, Treadwell is the real star.  He’s just so nifty!

#2680: Dark Trooper

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

DARK TROOPER

STAR WARS: POWER OF THE FORCE II (KENNER)

“It is a period of Civil War. The Rebel Alliance struggles to free the galaxy from the clutches of the evil Galactic Empire. Discovering that Imperial forces have begun developing a new type of stormtrooper, the Rebels call on mercenary Kyle Katarn. His mission: seek out and destroy the secret Imperial project called Dark Trooper. Known as phase III, this most powerful of the Dark Troopers is actually a figure known as General Mohc. Practically unstoppable, he represents the greatest threat to the success of the Rebel Alliance.”

Kenner’s Expanded Universe sub-set covered a few different EU tales, giving them each at minimum a pair of figures.  Though previously unexplored in the toys, that included some video game coverage, in the form of two figures based on the video game Dark Forces.  The first of those was the game’s protagonist, Kyle Katarn.  The second was today’s focus, the Dark Trooper, a concept that’s certainly moving up in the world, thanks to a proper canon appearance in the second season of The Mandalorian.  But, let’s jump to those humble beginnings, shall we?

THE FIGURE ITSELF

The Dark Trooper is the final single carded figure in the Expanded Universe sub-line of Kenner’s Power of the Force II.  He’s the other of the two later release figures I mentioned in last week’s Spacetrooper review.  Also of note is the fact that the Dark Trooper was the only of the nine single release figures not to be shown off on the cross sell on any of the packaging, for whatever reason.  The figure stands 4 1/4 inches tall (the second tallest in the set) and he has 6 points of articulation.  He’s definitely one of the stiffer figures included in this line-up, only further highlighted after looking at the Spacetrooper last week, with his extra movement and all.  Given the bulked up design of this particular look, the slightly more restricted set-up isn’t totally shocking however.  This mold was new to this figure, but would later be re-used in its entirety for the Fan’s Choice rerelease in 2007, likely due to the combination of rarity and popularity of this particular release.  It’s an interesting sculpt, because it feels more dated than the rest of the assortment, but that’s actually because he’s going for a recreation of the game model, which means he really should be that bulked up and geometric.  Hard to take the ’90s out of a ’90s design,  I suppose.  There’s a fair deal of detail work going into this guy, which does a lot to make him a bit of a step up from a straight recreation of the game look.  I also appreciated that the jet pack is actually a separate piece, with full detailing on the figure beneath it.  In terms of paint work, the Dark Trooper’s actually got a bit more going on than it seems on the surface.  All of the silver is painted, rather than molded, and there are actually two distinct shades between the outer armor and the mechanics.  The Dark Trooper includes a rather goofy looking heavy blaster lifted straight from the game, as well as yet another fold out display.  This one’s definitely one of the most clever, being based on the game’s HUD, allowing you to simulate an in-game set up.  That’s pretty nifty!

THE ME HALF OF THE EQUATION

The Dark Trooper was a figure that was almost not mine, and was almost the cause of a real tussle between me and Max….okay, not really.  But, when we were pulling the figures out when they came in, he had called dibs on the Sentinel, and then also set this one to the side…only I didn’t realize he’d set this one to the side with the intent to buy it himself, so I grabbed it with the rest of my set and innocently sent him a shot of the whole set after I’d opened them and set them all up.  Then there was much discussion between the two of us, at which point Max very graciously let me keep the Trooper, because he’s nice like that.  It’s nice to have the whole set-up of these guys after all these years, and the Dark Trooper is certainly nifty, especially after their TV appearance!

 

#2673: Spacetrooper

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

SPACETROOPER

STAR WARS: POWER OF THE FORCE II (KENNER)

“Five years after the Battle of Endor, the Rebel Alliance has driven the evil Empire into a distant corner of the galaxy. But a new danger has arisen: the last of the Emperor’s warlords has devised a battle plan that could destroy the New Republic. The ability of spacetroopers to operate exclusively in space made them a valuable asset to the warlord, Grand Admiral Thrawn. These heavily armed stormtroopers wear full-body armor and have equipment that enables them to function as personal space-capable assault vehicles.”

In the history of Stormtrooper variants, today’s focus, the Spacetrooper, is actually one of the very earliest.  They first appear in A New Hope, one of them being seen when the Falcon gets pulled into the Death Star. Admittedly pretty easy to miss, being a) rather small and b) not actually very removed from the regular Stormtrooper design.  He was also portrayed by concept designer and future director Joe Johnson, which is a nifty little bit of trivia.  The idea has stuck around since, gaining some slight changes over the years.  When it came time to adapt Heir to Empire into comic form, they were granted a unique armored appearance, which served as the inspiration for their very first action figure!

THE FIGURE ITSELF

The Spacetrooper was part of Kenner’s Expanded Universe sub-line for Power of the Force.  He was one of two figures that shipped a little bit later than the rest, and were subsequently even harder to find at retail at the time.  The figure stands 3 3/4 inches tall and has a whopping 8 points of articulation.  He’s notable for being the first use of a universal joint on the shoulders, in contrast to prior figures’ simple cut joints.  Why this particular figure was granted these is kind of a random guess, but I’d hazard it’s due to how the shoulders are designed.  It’s a little rudimentary in its implementation, but still quite cool, and certainly useful for a wider range of posing.  The sculpt was an all-new affair, reasonable given the all-new design.  He’s got the basic elements of a Stormtrooper, but a little more armored up, and a little more streamlined.  There are a few other movable elements worked in as well, with an adjustable jetpack, and a fold out blaster built into the left arm (but only the left, because two blasters is too many).  As with the articulation, it gives the figure a bit more variety for posing, and just gives him a better general feeling of value compared to some of the more basic troopers.  In terms of paint, the Spacetrooper is a little lax; mostly, he just relies on the molded white plastic.  It’s slightly pearlescent, which makes a touch hard to properly photograph when coupled with the lack of accenting.  Still, it’s not terribly far removed from the rest of the PotF stuff at the time, and it does hit all of the major elements.  The Spacetrooper doesn’t get any proper accessories, thanks to everything being built in.  He does still get the fold out back drop, though, which is still pretty darn cool.

THE ME HALF OF THE EQUATION

When the full set of EU figures came through All Time Toys back in 2019, we didn’t actually know it was a full set at first.  Max had pulled out his Imperial Sentry, and told me I was welcome to the only other one we knew was in the lot, which was this guy.  Honestly, I was pretty happy just to get him, because I’ve always thought he looked pretty nifty, and I’d not gotten the chance to pick him up at that point.  Compared to some of the others, he fades into the background a little bit, but he does a lot of cool, innovative stuff for the time, and honestly holds up pretty well.