Tag Archives: Steve Rogers

#3267: Steve Rogers & The Hydra Stomper

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

STEVE ROGERS & THE HYDRA STOMPER

MARVEL STUDIOS WHAT IF…? (HOT TOYS)

“Who does Peggy Carter call in for backup when she needs it? Steve Rogers, of course. In this universe, Peggy Carter jumps into action with a number of familiar faces, but even she might need some help defeating the enemy. Calling in air support, she certainly doesn’t expect Steve to come swooping in – in a Hydra Stomper suit.”

Prepare for more formula breaking, as I interlude with yet another Hot Toys review outside of a monumental number!  I seem to be doing this far too frequently, don’t I?  It’s gonna make the monumental reviews not so special.  Ah, I don’t really care that much, honestly.  I just want to review the toys.  It’s kind of the whole purpose of the site, right?

In my last Hot Toys review, I was discussing my adherence to just Captain America stuff, and how that played into some alternate universe characters, specifically when What If…? is on the table.  While What If…? is a show I had generally mixed feelings about, I absolutely loved its first episode, “What If…Captain Carter Were The First Avenger?”  I’ve already got the HT Captain Carter, so there’s only one proper way to follow-up: The Hydra Stomper!

THE FIGURE ITSELF

Steve Rogers and The Hydra Stomper is a deluxe set of figures from Hot Toys’ Television Masterpiece Series, where it’s numbered TMS060, placing it just after Peggy in the numbering.  This marks the third What If…? offering from Hot Toys.  Like Peggy, this set stuck pretty close to its original anticipated release date of the end of 2022/beginning of 2023, though it did stick to the earlier end of the window.  There are two releases of the Hydra Stomper available; just the Stomper on its own is available as part of the Power Pose Series, and then there’s this set, which adds in the full pilot Steve Rogers figure to the mix.  Clearly, there was no way I was just doing the Stomper when there’s also a Steve available, right?  Right.

Steve is technically the actual “figure” here as classified by HT and Sideshow (to the point of being the one with an actual classic HT-style box), so I’ll kick things off with a look at him first.  The figure stands just over 11 inches tall and has over 30 points of articulation.  Steve’s head sculpt, much like the Captain Carter figure, is an animation-inspired piece, rather than shifting him to a realistic style like a lot of Hot Toys offerings.  As with the Peggy sculpt, there’s still a degree of an Evans likeness present here (albeit, the shrunken down and skinny Evans likeness from early in The First Avenger), so you can tell who it’s supposed to be.  It’s a good match for the design as seen in the show, and it’s nice, clean, and slick.  The paint work emphasizes the animated look further, while still maintaining the usual high Hot Toys standards.

Steve’s outfit is generally pretty simple (which is true to the show), being a rather standard loose-fitting jumpsuit.  There’s an underlying shirt, albeit without any sleeves.  You won’t notice, of course, since the suit’s not designed to be removed.  Further tailored items include some harness straps and a removable back pack.  There’s also a sculpted buckle for his belt, as well as a pair of feet that look like boots.  Under the outfit, he’s got a rather small and scrawny base body, matching well with his pre-serum build.  It’s a rather nicely articulated base body, which makes for easy posing.

Steve gets a rather modest selection of extras, with three sets of hands (L and R relaxed, L and R pointing, L gripping, and R flat), and a display stand that matches with the one included with Peggy.

Moving past the Steve Rogers figure, let’s take a look at the thing that takes up the vast majority of the package space here: The Hydra Stomper!  The figure stands a little over 22 inches tall and has 8 points of articulation.  On its own, the suit is part of Hot Toys’ Power Pose Series, which is their way of releasing Iron Man armors at a cheaper price by cutting back on articulation in order to simplify the engineering.  As such, this figure only gets movement where it absolutely *needs* it, rather than just sort of all the places it naturally would.  All things said, the posability is still better than I’d expected.  In particular, the fully articulated fingers are really impressive.  The only area that’s truly restricted is the lower half, but on the plus side, it does keep him very stable on his feet.  His sculpt is, as expected, quite impressive.  It’s very clean and sharp, and a spitting image of the design as seen in the show.  The figure is designed to allow Steve to actually sit inside; it’s a bit tricky to get him in there, and he’s a little cramped, but it’s cool to have the option. There are light up features worked into the eyes and the torso, both of which are battery operated independently from each other.  The Hydra Stomper is packed with a flight stand, which affixes to the belt line of the figure.  It holds him rather securely horizontally, allowing for a more stable point for Peggy to hold onto the back like in the episode.  It’s a little tricky to get it all properly posed and secure, but it’s fun that the option is there.

THE ME HALF OF THE EQUATION

As I mentioned in the Captain Carter review, this episode was by far my favorite of What If…?, and I was honestly already kinda sold on these even before seeing the show.  The Hydra Stomper design is just one that really works for me, and as soon as I saw this figure, complete with the Steve Rogers, I was sold on getting this set and the Captain Carter.  Since I got Peggy from Jason at All Time as a Christmas gift, this sort of became my Christmas gift to myself, I suppose.  It’s huge, it’s impressive, and it’s just a whole lot of fun.  And I’ve even made shelf space for it already, so I don’t even have that whole thing looming over me!

Thanks to my sponsors over at All Time Toys for setting me up with this set to review.  If you’re looking for cool toys both old and new, please check out their website.

#3144: Captain America

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CAPTAIN AMERICA

MARVEL LEGENDS (HASBRO)

“When, in 1941, a frail young patriot agreed to be a test case for an experimental “super-soldier” serum, he was transformed into Captain America – the living symbol of freedom. His body is now physically perfect, his courage unmatched and his fighting skills cannot be equaled. Cap joined WWII and helped the allies win the war. After spending the decades following the war in suspended animation, he was revived by the Mighty Avengers, a super hero group this charismatic born leader would eventually command.”

Hey, remember way back, when I was having to space out my Marvel Legends reviews, because, like, there weren’t a ton of them?  Well, I’m not *quite* back to that level, but I’m still kind of needing to space some things.  I mean, it’s been more than two weeks, which feels like a fair bit of time.  Also, last time I left off on a standard Captain America, and this time I’m picking up with a standard Captain America.  You know, for consistency sake.  Back in May, I took my first look at Hasbro’s celebration of Marvel Legends‘ twentieth year, with their fancy updated take on Iron Man.  They’re working to recreate the whole “Series 1” line-up from Toy Biz’s run, so joining up with Iron Man is the aforementioned Captain America!

THE FIGURE ITSELF

Captain America is another of the four figures in Series 1 of the “20th Anniversary” sub-line of Marvel Legends.  Though he was the first figure shown off, Cap’s trailing Iron Man and Hulk in his arrival at retail.  As with the whole line-up, Cap’s a Fan Channel-exclusive, so he’s not at big box stores.  It’s a nice change of pace, given that the 80 Years Cap was a Walmart-exclusive.  While Iron Man was a slight deviation in terms of design from the 80 Years figure, Cap is more or less an equivalent update, though this one is without the Alex Ross-inspiration.  He’s a more straight-forward update of the look of the original Legends Cap, which certainly makes a lot of sense for this release.  The figure stands 6 1/2 inches tall and has 32 points of articulation.  From the neck down, this figure’s sculpt is the same as the 80 Years release.  It’s a good, strong sculpt for a classic Cap, and it’s only gotten the one use before, so I like seeing it crop up again.  He gets a brand new masked head sculpt, which is rather different from the last one.  After years with the weird scowl-face, the 80 Years was a step in the right direction.  It was a bit specifically inspired by Ross’s art, which is a little less on the multi-purpose side.  This one, sculpted by Paul Harding, is more general in its design, and it’s very definitely my favorite Hasbro Cap sculpt to date.  Definitely a worthy successor to the original Cap sculpt, and that’s saying quite a bit.  Cap’s color scheme is much brighter on this release than the 80th figure.  I like it.  I like it a lot.  It’s bold and very eye catching, and there’s a ton of really well-rendered accenting, especially on the scale mail.  It really helps the sculpted elements to pop.  Much like Iron Man, Cap is quite well-accessorized.  He gets an unmasked head, a corresponding pulled down mask piece to go over the neck, three sets of hands (fists, open gesture, and a flat/pointing combo), a shoulder harness, his shield, three different styles of effects pieces for the shield, and a display stand with a cardboard backdrop.  The unmasked head matches up well with the masked one, and it’s a pretty solid sculpt in its own right.  I dig that ’80s style hair for Rogers.  The hood piece is kind of loose and floaty, but it serves its purpose well enough.  The hands are all re-used, but they work well, and provide him with a host of cool posing options.  The shoulder harness is a new piece, distinctly different from prior ones.  I like its more simple design.  The shield is at once an improvement on prior pieces, and also the worst thing about the figure.  I really like the larger size of the shield, and I like the effects pieces…in concept.  In practice, it results in three permanent holes in the shield, rendering it rather odd looking when the effects pieces aren’t in place.  So close, and yet so far.  Perhaps a future release will re-work the piece to remove the holes, and then we can have it all.  Cap’s display stand is the same one included with Iron Man, and his backdrop is likewise double sided, with an illustration of the original figure’s stand on one side, and the cover to the issue of Captain America packed in with the Series 1 release.  Yes, unlike Iron Man, Cap’s cover is actually the same one was the original figure.  So, that’s a pretty cool touch.

THE ME HALF OF THE EQUATION

I liked a lot about the 80th Cap, but I felt like he was just shy of hitting that perfect Cap mark.  I definitely liked the look of this one from its announcement, and I was thrilled when it turned out to *not* be a Walmart exclusive.  It was very definitely my favorite and most anticipated of the Anniversary figures, and it’s been a little bit of a wait, but it was very definitely worth it.  The shield thing is a bit annoying, but that issue aside, this figure’s absolutely fantastic, and undoubtedly the best Legends Cap to grace the line.  I really, really like this figure.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#3131: Captain America

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CAPTAIN AMERICA

MARVEL LEGENDS (TOY BIZ)

I gave today’s intro a fair bit of thought.  Usually, I like to keep things fairly light and apolitical here on the site, what with it being about toys and all, but I would be lying if I said that wasn’t becoming a harder thing to do these days.  My aim isn’t to offend, or hurt, or throw mud, or anything like that, but even from an apolitical stand-point, there wind up being some lines that get crossed, and it gets pretty hard not to say anything about it.  So, I’m gonna keep being me, and I’m gonna say what I say, and continue to just try to be my best self.  Today is July 4th, a day that’s typically dedicated to celebrating all the great things about America.  For me, on the site at least, that means I get to review another Captain America figure, because that’s how I roll.  This year, things are very much muddied by current events, leaving a lot of people not feeling quite so hot about America, and perhaps a little less proud to be part of this whole venture.  I can definitely feel that, and I think we’ve all got some work we can do to get to a better place together.  I think we can all work towards being our own best selves.  And if you think my best self isn’t going to take the opportunity, in a time of uncertainty, fear, and worry, to review a figure of Steve Rogers, a symbol of hope for all the things that America should be to all the people that call it home, then you’re definitely not one of my regular readers.  When you need some inspiration, a Captain America’s not a bad place to start, right?

THE FIGURE ITSELF

Captain America was released as part of Toy Biz’s “Face Off” spin-off of Marvel Legends, which gave us new versions of the core heroes, facing off against their antagonists.  For his part, Cap was packed alongside Red Skull.  There was also a variant unmasked Cap, which was instead packed with Baron Strucker.  Look, he’s fighting a Nazi either way, right?  This was Toy Biz’s fourth and final version of Cap in their run with Legends, following the original Series 1, the Ultimate, and its more classically-inspired variant.  The figure stands about 6 1/2 inches tall and he has 46 points of articulation.  That hefty articulation count is aided by the addition of separately articulated fingers, something Toy Biz was giving a try later in their run.  They wound up as one of the very first things cut by Hasbro, and, honestly, it’s not a huge shock.  They’re really not much more than a novelty, and they mean he can’t really grip or anything.  It’s the sort of thing that alternate hands are just a far more efficient way of doing finger poses.  Other than that, the articulation is pretty decent from a range of motion standpoint, though perhaps not so much from the appearance angle.  They definitely aren’t super worked into the sculpt’s aesthetics.  Said sculpt was a mix of old and new.  He used the Ultimate Cap as a starting point, with the addition of a more classically-based set of gloves and boots, as well as slightly tweaked versions of the upper torso and head.  This whole sculpt wound up getting up-scaled for Toy Biz’s Marvel Legends Icons line, and it was honestly pretty good for the time.  It’s perhaps not aged quite so well, what with its wonky proportions and the slightly odd shaping of the face.  That said, the texture work, especially on the scaling, is really amazing work, and if nothing else, he’s certainly got a nice style to him.  At the time of release, he was probably one of Toy Biz’s best.  Cap’s paint work is decent enough.  Toy Biz was still tending to go pretty muddy with the colors at this point, but this guy actually gets a fairly bold and clean color scheme.  It works pretty well for the character, and, again, it’s really some of the line’s best work.  Cap is packed with his shield, which is the same as his Series 1 counterpart’s, complete with the cloth straps for placing over his shoulders.  This time, it’s better painted, and I particularly like the black interior; it definitely adds a lot more pop.

THE ME HALF OF THE EQUATION

Back when this figure was released, I decided to stick with my Series 1 version, rather than trying to upgrade.  Given how difficult it was to get these packs, or really Legends in general, it wasn’t hard to justify.  I always kind of wanted one, but I never got the chance to grab him over the years.  Fortunately for me, he came into to All Time a couple of months ago.  He’s certainly a figure that shows his age, but I still really enjoy him for what he is.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3000: Captain America – Infinity War

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CAPTAIN AMERICA

AVENGERS: INFINITY WAR (HOT TOYS)

In a turn of events that I suppose is all rather fitting, today, the last day of 2021, also marks my 3000th review here at the site.  Pretty crazy, huh?  I never really foresaw myself making it quite this far, and yet, here I am.  3000 is a very big number, and a bigger number than the the total quantity of figures I had in my collection when I started this thing.  Moreover, I’ve made it all the way to the end of 2021, a journey that I would very much be underselling with the description “turbulent.”  A lot’s happened, and it has not been easy.  But I’m here.  And I’ve got a thing to review.  And I suppose that’s the most important thing in the moment.  So, let’s jump back to 2018, back to the throws of Avengers: Infinity War, specifically Captain America and his rather disheveled look from his own rather turbulent year.  Fitting, I suppose.

THE FIGURE ITSELF

Captain America is part of the Infinity War tie-in component of Hot Toys’ Movie Masterpiece Series, where he’s figure MMS 481, which made him the sixth of the IW tie-in figures.  The figure arrived not too long after the film’s release, hitting in the fall of 2018.  There were two releases of him, a standard and a “Movie Promo Edition” which was a Sideshow-exclusive in the US.  The difference between the two comes down to a few accessories; the figure proper remains the same.  This Cap is based on his Nomad appearance from the film, which is of course the only look he actually has in Infinity War, so I guess that makes sense.  The figure stands about 12 1/2 inches tall and he has over 30 points of articulation.

While most Caps these days include multiple heads, this release only has the one.  It makes some degree of sense, since he doesn’t have the helmeted look in the film, so I suppose he only needs the one head.  It’s only the one facial expression, but that’s not uncommon for unmasked heads from Hot Toys.  This one does live up to Hot Toys’ usual penchant for very lifelike sculpts.  It sports a pretty spot-on likeness of Evans in the film, at least facially.  The hair is perhaps a little bit too orderly for proper film accuracy, but it’s not too far off, and it’s certainly closer than either Hasbro or Bandai’s attempts were.  It avoids the seam at the sides of the head that the Endgame release had, but trades it out for a rather noticeable join at the back of the head where the longer hair attaches.  It’s still not the worst thing, but at this price point, you do hope for a little better.  At the very least, the paint work topping it all off is really good, up to Hot Toys’ typical standards for face paint, with a very lifelike quality to the whole thing.

In Infinity War, Cap is, at least canonically, supposed to still be wearing the suit he had in Civil War, having had not time on the run between films to swap out.  In actuality, there are a few changes to the suit beyond just the expected wear and tear of being on the run, but they’re generally minor.  In terms of how the suit works on the figure, it’s pretty similar to the Endgame figure, being two main parts, with a lot of layers attached.  As with that figure, this one’s belt sets perhaps a little low, but it’s otherwise a well-tailored outfit that works well with the underlying body of the figure and captures the look of the outfit seen in the film quite nicely.

The underlying base body appears to be the same one used for Endgame Cap, which was a good fit for Evans’ build for the character, as well as doing a good job of balancing aesthetics and functionality.  As with that figure, the movement of the base body is somewhat impeded by the nature of the suit design, which does have some notable restrictions at the hips and shoulders.  Still, there’s plenty of movement to be had, and he can get some pretty solid range on most of the joints.

When it comes to accessories, Cap gets quite a few, including:

  • 8 hands
  • 2 Wakandan shields
  • Outrider corpse
  • Corvus Glaive’s Spear
  • Proxima Midnight’s staff
  • Display stand

The hands include a pair of fists, a pair of gripping, a pair of relaxed gesture, and a right pointing/left open gesture combo.  They give all the important needs for posing and working with the included accessories, and also do a good job of capturing the look of his gloves from the movie.  They’re a little tricky to swap out, but not impossibly so.  The two Wakandan shields are designed for specifically right and left sides, and are able to be fully collapsed or extended, which is certainly nice engineering.  The display stand is the same style as we saw on the Endgame figure.  I dig the hexagonal shape.  And that’s all of the standard release stuff.  The exclusive also adds a fallen Outrider corpse piece to sit atop the stand (along with a printed piece which looks like dirt ground), as well as both Corvus Glaive and Proxima Midnight’s weapons.

THE ME HALF OF THE EQUATION

I missed out on the standard release of this guy when he came into All Time.  I mean, not really missed out, I suppose, since he was in stock, and I just dragged my feet on him, because I wasn’t sure I wanted to jump back into Hot Toys.  Once the Endgame release truly broke me on that, I regretted passing on this guy, so he went on my list of figures I was definitely planning to snag should they get traded in.  As luck would have it, this guy wound up getting traded in within about a week of me getting the Endgame version, which was a solid thematic thing.  He’s the best version of this design available to be sure, and he’s honestly the version of Cap that most reflected my personal mind state as I navigated the last year. A little broken, a little lost, and his resolve a little shaken.  But he’s still him deep down.  A fitting send off to the year.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#2951: The Hydra Stomper

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

THE HYDRA STOMPER

MARVEL LEGENDS (HASBRO)

“In the universe you know, Steve Rogers was the first Avenger, Captain America. In this universe, Steve is injured and fights in ‘The Hydra Stomper,’ an Iron Man armor created by Howard Stark.”

Hey, we’re back with just a touch more What If…? before we jump down a different Marvel rabbit hole for just a bit.  In 2006, Marvel ran an alternate universe miniseries, Bullet Points, which explored a world where Dr. Abraham Erskine is killed prior to turning Steve Rogers into a super soldier.  In this alternate reality, instead of becoming Captain America, Steve is given a suit of armor, and becomes that universe’s Iron Man.  Elements of this story were re-used for the first episode of What If…?, where, after Peggy gets the Super Soldier serum instead of Steve, he still wants to help out in the battle.  Howard Stark uses the recently recovered Tesseract to power a suit of Iron Man-inspired armor, dubbed “The Hydra Stomper.”  He’s far too large to be a standard release, so Hasbro has instead released him as his own solo release, tying in with the main assortment.  Let’s have a look at him today!

THE FIGURE ITSELF

The Hydra Stomper is, as noted, a larger-scale solo release for Marvel Legends.  He’s larger than the usual deluxe release, and is at the same price point as the Surtur figure from the Infinity Saga line.  By far, he is the largest of the What If…? associated figures at this time.  The figure stands just shy of 9 1/2 inches tall and he has 27 points of articulation.  In many ways, this figure’s construction is similar to Iron Monger, although it’s worth noting that there are no parts at all shared between the two figures.  Just similar structures, likely because they’re both big Iron Man-inspired designs that were in development by the same team at roughly the same time.  The Hydra Stomper sports an all-new sculpt based on its design in the show.  For this alternate universe armor, the designers have clearly put a lot of effort into homaging Tony Stark’s original armor in the comics (which also served as the basis of the Mark I in the MCU proper), with its bulkier build, the slightly different layout of the faceplate on the helmet, and the presence of the antenna on the shoulder.  What was that antenna for, by the way?  Research says it was for extending his range for radio signal.  Well, I guess it was the ’60s, and that was a bigger thing then.  It makes even more sense when you move it back to the ’40s, even.  Whatever the case, the original design is a fine starting point, and Steve was even seen using essentially just that armor in the aforementioned Bullet Points story, so it tracks.  For the purposes of the show, they’ve done a bit to more clearly sell the WWII-era military branding of the design.  Effectively, it looks like a Jeep that walks.  Unsurprisingly, I am okay with this.  The figure’s sculpt does a nice job of recreating the design from the show, and turning it into a hefty, impressive looking toy.  The line work is all pretty sharp, and he looks properly machined for the role.  Range of motion is a little limited at a few spots, as is expected with a figure this chunky, but he’s generally not too bad.  The roughest bits are definitely in the legs, especially at the knees and hips.  He also does need a little bit of care when it comes to making sure he can stay balanced, especially when the rocket pack is in place.  Said rocket pack is removable, and features posable thrusters.  It’s a decent piece itself, though it does fall off just a touch easier than I’d like.  As it stands, it’s not really possible to get Captain Carter on his back like in the show, even with the handhold present on his back, which I was a little let down by.  Hydra Stomper’s paint work is pretty basic for the most part, but it does what it needs to.  The few printed sections on the armor look nice, as does the slight variation in the exact color of olive drab.  Hydra Stomper is packed with two sets of hands (open gesture and fists), plus two blast effects for the rockets.  It’s not a ton, but he’s also a rather sizable figure, so he doesn’t really feel lacking.

THE ME HALF OF THE EQUATION

The Hydra Stomper is something that almost feels tailored to me, really.  I mean, it’s Steve Rogers in a big, boxy suit of armor with lots of utilitarian design elements and just a hint of Jeep.  And he’s green, even?  What’s not for me to like.  Unsurprisingly, he was the What If…? figure I was looking forward to the most, so of course he was also the last one I was able to get ahold of.  That’s just how it goes, right?  The final product isn’t without its flaws.  I wish he was a little more stable, and I wish it was easier to replicate Carter riding on his back like in the show.  I also kind of wish that they had gone the Monger route and packed him with a pilot Steve figure, but I can see why that might have been seen as sales prohibitive this early in the game.  All those things don’t take away from the fact that I really, really like this figure, and I’m glad to have gotten both he and Captain Carter so quickly after the episode’s premiere.  He’s definitely very fun.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#2940: Zombie Captain America

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

ZOMBIE CAPTAIN AMERICA

MARVEL LEGENDS (HASBRO)

“Captain America’s team were the first responders to the zombie outbreak — and its first victims.”

October may be over, but the spookiness continues….well, for today at least.  But it’s in this great sweet spot of spookiness *and* Marvel.  Because, well, it kind of has to be, because how else am I going to get all these Legends reviewed.  Yay for the crossover potential of Marvel Zombies!  First appearing in the pages of Ultimate Fantastic Four in 2005, later that same year Marvel Zombies launched in its own book, spawning a whole franchise within a franchise.  Said franchise within the franchise then made its way into the MCU this year in What If…?‘s fifth episode, aptly titled “What if…Zombies?”  My opinions on What If…? were a bit mixed, and the zombies episode was itself rather a mixed bag for me, but there’s no denying that the zombies make for a good concept for toys, especially when it gives me a good excuse to buy another Captain America, who, it should be noted, remains a Captain in this universe, rather than getting a promotion to Colonel as his does in *some* zombie universes out there.

THE FIGURE ITSELF

Zombie Captain America is part of the Watcher Series of Marvel Legends.  He’s unnumbered, as the one figure in the set that doesn’t actually include a piece for the Build-A-Figure (ironic that the zombie is the only one that doesn’t include an extra body part), and he’s also the double packed figure for this assortment.  The figure stands 6 1/4 inches tall and he has 30 points of articulation.  Compared to other MCU Cap figures, the articulation scheme on this one is definitely improved.  There’s a better range of motion on most of the joints, as well as use of ball joints at both the neck and the mid-torso, which supports a more fluid range than prior molds had.  He also gets pinless construction on both the elbows and knees.  While you would think that a Zombie Cap would be a good excuse to share some parts with older MCU Cap releases, this figure shares only the left boot with the Infinity War version.  Everything else is all-new to this release.  The helmet and shoulder harness pieces are separate parts, adding some nice depth to the sculpt.  The uniform is also nicely detailed, and there’s some fantastic work on the tattered remains hanging around the major spots of damage on the body.  Speaking of the damage, the actual damage is a lot more gruesome and in depth than I’d had anticipated on a mass retail release.  The legs in particular are quite gnarled.  It’s some truly impressive work.  Aiding the rather impressive sculpted work is some pretty solid paint work as well.  All of the base work is pretty straight forward, and matches the color scheme presented in the show, but they’ve also added a degree of blood coverage (albeit in a slightly purple color, so it’s not explicitly blood) around the wounds.  Hasbro doesn’t often do this kind of accent work, so it’s certainly nice to see them do it here, especially when the confines of a mass retail release would have given them an easy pass for not including some of these details.  Cap’s only accessory is his shield; it’s the same mold they’ve been using since the First Ten Years release, but this time with a bit of that purple splatter on the front of it.  It’s a good piece, but he does end up feeling a little bit light compared to other offerings.  That said, I’m not really sure what else he could have gotten.

THE ME HALF OF THE EQUATION

I run hot and cold when it comes to zombies, and I wasn’t super big on the episode this figure was based on, so I wasn’t really sure how I’d feel about this figure in hand.  That said, he’s still a Captain America, and I do have a hard time passing on those.  I gotta say, this is honestly one of the strongest figures in this set.  He’s just a solid figure from start to finish.  Really, I just wish we had a more standard Cap that matched this one in quality, but that’s hardly on this particular release.  He’s utterly fantastic, really.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#2933: Captain America

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

CAPTAIN AMERICA

MARVEL LEGENDS (HASBRO)

“Armed with Wakandan Gauntlets, Steve Rogers steps forward to defend the world from the impossible threat of Thanos and his minions.”

Okay, I’m gonna level with you guys: you better like Marvel Legends reviews.  Hasbro’s been really switching it into turbo with the line, and though they’ve been *trying* to space it out, that hasn’t so much worked out.  The result is a metric ton of them all dropping at once.  So, it’s gonna be at least a month of Legends around these parts.  I hope I can cling to my sanity.  Let’s kick things off by jumping back into Hasbro’s Infinity Saga sub-line, which is yet another throw-back to the first decade of the MCU.  It’s covering films from the beginning of the saga, up through Endgame, filling in some holes in a few of the line-ups, as well as offering some updates to figures that weren’t quite there the first time around.  Today’s figure, Captain America from Infinity War, falls into the latter category.

THE FIGURE ITSELF

Captain America is the second of the 10 figures in the Infinity Saga sub-line of Hasbro’s Marvel Legends.  He’s one of five single-packed standard figures, and also one of the three exclusives in the line-up.  Yes, once again Cap is a Walmart-exclusive.  I’m going to do my best not to harp on that too much, but it continues to feel like really terrible planning for overall line performance to have one of your central pieces always wind up as an exclusive to a chain that’s really bad at handling exclusives.  Moving on.  Cap is based on his Nomad appearance from Infinity War, a design that has been done in Legends once before, but not in a particularly accurate fashion.  This one aims to fix those issues and go a little more screen accurate.  The figure stands 6 1/2 inches tall and he has 32 points of articulation.  He’s a bit of a mix of old and new articulation styles, due to the nature of his construction.  His arms are using the pinless construction, which looks quite nice, and they’ve reworked how the bicep cuts work to make them a little more pleasant to look at when posing.  The rest of the movement more or less remains the same as it was on the first version.  A lot of that is due to most of the parts being shared between the two figures.  The head and arms are new, but everything else is re-use.  It’s sensible, since most of the old figure was pretty decent; don’t fix what’s not broken and all that.  The biggest issue with the prior Cap was the inaccuracy on the head, which this one fixes, more or less.  The hair and beard are far closer to their on-screen looks this time, which is a definite improvement.  I don’t know that the likeness is quite as spot-on as, say, the Endgame figure, but it’s certainly not un-Evans-like.  There’s a second head sculpt included, this one more expressive than the first.  It’s not a bad face sculpt, but I’m not sure the hair works as well.  He looks like he’s got some very serious helmet hair going on.  The new arms not only improve the aesthetics of the articulation, they also fix the issue of the last figure only having the one glove.  Now he’s nice and symmetrical.  In general, the new sculpt is a resounding success.  If things seem to be going too smoothly, that’s because they are.  The sculpt is great, but as with pretty much every IW Cap, there’s always a trade off.  In this case, it’s that the paint ends up making his uniform much brighter and cleaner than it should be.  The colors were one thing that the first figure did alright on, so the move to something brighter feels like an odd misstep.  It’s not terrible, but it’s definitely off.  The paint on the heads is at least up to the usual standards, so that’s good.  In addition to the previously mentioned extra head, he also gets two sets of hands (gripping and fists, both gloved this time), as well as two of the Wakandan shields.  The shields aren’t a matched pair; one is open and the other closed.  It would be nice to get two sets of each version, especially given the extra price on this round of releases.  At least they actually gave us two this time, though.

THE ME HALF OF THE EQUATION

This figure fills me with mixed feelings.  I wanted an improvement on the last release, and that’s what I got, but there are once again trade offs, and I do really feel like if you’re going to force us to buy the same figure twice, you could at least go the extra mile by throwing in more accessories.  Just to spruce him up a little bit.  And that’s all without getting into the Walmart exclusive thing, which continues to be a rather stupid move on someone’s part.  Not entirely sure whose, but someone’s.  All that said, I was at least able to get mine without any major issues (apart from the one delay that pretty much everyone got), and in-hand, I do really, really like this figure.  It’s a shame we couldn’t just get him this way from the start, but then I suppose we wouldn’t appreciate this one as much.

#2877: Captain America – Avengers Assemble Edition

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CAPTAIN AMERICA — AVENGERS ASSEMBLE EDITION

S.H. FIGUARTS (BANDAI)

Bandai’s S.H. Figuarts line began as something that was mostly focused on Japanese properties, and while they aren’t totally out of the picture by any stretch of the imagination, they certainly have added a lot more western properties to the line-up.  In particular, figures based on the MCU have become quite common place.  They’ve done quite an Endgame line-up, and now their circling back with a selection of figures based on the first Avengers, under the heading “Avengers Assemble.”  I am, somewhat predictably, looking at the Captain America from the set, because that’s what I do these days.

THE FIGURE ITSELF

Captain America is one of the four Avengers Assemble Edition figures added to the S.H. Figuarts line-up this year.  Cap started showing up domestically in early July, which is a convenient time for Cap figures.  He’s based on Cap, specifically in the first Avengers movie, though it does allow you to use him as both an Endgame flashback Cap and a Homecoming educational videos Cap, if you so choose.  That said, there was a release specifically patterned on the Endgame appearances of the costume last year.  This one sort of tailors him more to his actual Avengers appearances.  The figure stands about 6 1/4 inches tall and he has 34 points of articulation.  He’s similar to the Endgame Cap scale-wise, which also means he’s on the taller side for Figuarts, meaning he’s also not too terribly far off from Legends scaling.  Still a touch small, but you could fudge it if really pressed.  He follows the usual Figuarts articulation scheme, so that gives him an impressive range of motion.  That being said, he shows some of the improvements we’ve been seeing more recently on Figuarts with how the articulation is implemented, so he’s a slightly more solid figure, with a little more heft to him.  I definitely like that.  Cap’s sculpt is largely shared with the Endgame version of this costume from last year, which is sensible, since they’d want to get some mileage out of this mold if possible.  It’s a pretty impressive piece of work.  It’s very clean and sleek, and definitely makes a slightly iffy design work nicely in three dimensions.  There’s the usual level of stylization to him, so that he fits in with the rest of the line.  I was happy with how well they got his build down, since the Hasbro version of this costume was a little bit scrawny.  This version certainly more lives up to the “America’s Ass” monicker.  The only thing I’m not really big on is the belt, which has a little trouble sitting properly.  It tends to hover a little higher than it should.  Cap’s standard head sculpt has the helmet and a more neutral expression, which is a strong set-up.  The helmet’s details match well with the films (again, something Hasbro tended to struggle with) and the Evans likeness is pretty strong.  The paint work on Cap is quite nice.  It’s got the basic color scheme down nicely, and reminds me how much I like the brighter colors of this costume.  They also added some accenting on the outfit, so as to give him a little more wear, since he’s supposed to work for the final battle from the movie.  When it comes to the accessories, Cap is pretty nicely covered.  He gets three alternate heads: masked and angry, and two unmasked.  The unmasked are the same sculpt, but one is clean, and the other is dirty.  He also has the two necks to match masked vs unmasked heads, as well as two different collars one with the hood and one without.  Also included are two shields, again clean and dirty.  They get fully folded down straps, plus one for the upper arm, two alternate hands for each side holding the lower strap, and one strap with the additional hook for doing the one handed hold on the shields.  There are a total of 14 hands included, which covers the fists he comes wearing, the pair with the straps, the pair with the tab for use with the strap with the hook, two open gesture, two gripping, two relaxed, one pointing with the index finger, and one pointing with index and middle finger.

THE ME HALF OF THE EQUATION

As I’ve mentioned before, I don’t have the dislike for this design that some people do.  That said, it’s toy coverage wasn’t great.  The Legends versions were definitely not at the line’s height, and I was disappointed by the Endgame re-release in particular, since I’d been hoping for an all-new sculpt.  Alas, that wasn’t the case, so I was still in the market for a good small-scale version of the costume.  When this one came in at All Time, it was a pretty easy sell for me.  He’s a really strong figure, and easily the best version of this costume on the market.  He definitely feels worth the value.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#2842: Captain America

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CAPTAIN AMERICA

AVENGERS: ENDGAME (HOT TOYS)

These days, I pretty much exclusively save my Hot Toys reviews for monumental numbers, but I’ve gotten to the point now where anything less than 500 doesn’t seem worth it, so it’s literally less than one a year.  Despite my last one being not even a whole year ago, when I crossed the 2500 mark, I’ve actually picked up a new one that warrants reviewing, and I don’t particularly want to wait seven months to review him, just to get the numbers to line up right.  If he’d actually come out when he was *supposed* to, I would have been golden, but nooooooooo….  So, anyway, I’m breaking the structure.  I know, you’re all so broken up about it, right?  Let’s jump back to 2019, when the world sucked a great deal less, and discuss the culmination of a decade’s worth of movies in Avengers: Endgame, and, more specifically, Captain America!

THE FIGURE ITSELF

Captain America was released as part of the Endgame component of Hot Toys’ core Movie Masterpiece Series, where he’s figure 536.  He winds up being the sixth release of the Endgame figures, though he was originally meant to be a little bit earlier.  His initial release date was projected for June of 2020, but he wound up being about a year later than expected, making him so far the most delayed of the Endgame figures.  Presumably, the need to add some more final battle-specific parts contributed to this at least a little bit, but there was also that whole pandemic thing going on, which I’m sure did not help.  He’s finally here, though, and that’s the thing that matters the most of all.  Cap is based on his all-new super suit from the movie, which places him as a specifically third-act version of the character, which is really where he gets his best look, so I’m all about it.  It’s definitely Chris Evans’ Cap at his Cap-iest.  The figure stands about 12 1/2 inches tall and he has over 30 points of articulation.

As is the norm for masked characters, Cap is packed with two different heads for this release.  The first is a helmeted look, which is a quite nicely layered sculpt that looks like he’s actually got a separate helmet and everything.  For this head, they’ve given him an extra joint at the base of the jaw, for some extra mobility.  It works pretty well, but does result in a slightly noticeable seam at the back.  It’s certainly an improvement from earlier versions of such designs, though, which is good.  The head has a solid likeness of Chris Evans under the helmet, showcasing an improvement even on the already really good likenesses of the older Caps.  Much like the DX12 Batman, the helmeted head has three different mouth plates that you can swap out for different expressions.  The standard is fairly neutral, and has the most versatility, but he’s also got one with the mouth slightly opened, and one with the teeth firmly gritted and bared, which is perfect for the more intense battle poses.  The plates are attached with magnets, and can take a little bit of doing to place, but stay nicely once set, and swap out without too much trouble.  It certainly works a bit better than the straight up pegs that were on Batman.  The paint work on the head is up to the usual HT standards, with a very lifelike appearance for the face, and some really nice wear and tear detailing on the helmet.  The second head gives us a proper un-helmeted look for Steve.  Originally, the photos showed the same unmasked head that was included with the Winter Soldier, Age of Ultron, and Civil War releases, but prior to release, Hot Toys replaced it with an all-new sculpt that more accurately depicts Evans as seen in Endgame.  It’s a very strong sculpt, with a really impressive likeness, perhaps even better than the one on the helmeted head.  Unlike the helmeted head, this one doesn’t have the extra joint.  It makes for slightly less posability, but looks better aesthetically, and given his more composed appearance, it’s not really meant for crazy poses anyway.  The only real downside to this sculpt is that there’s a rather noticeable seam on the sides of the head.  Fortunately, it’s not too bad when not directly lit, but at this price point, you would hope for it to be just a little bit better.

Cap’s new suit for Endgame‘s final battle was a fairly strong point for the movie.  It’s kind of indicative of the MCU movies as a whole,   taking various elements that worked previously, and rolling them all into one slightly more perfected, more direct comics-directly adapted final product.  It looks really cool, and it just really works.  It’s construction is also a bit more involved than earlier designs, as well, which is reflected in its translation here.  His underlying “body suit” is two distinct pieces, a shirt and pants.  The pants have some molded knee pads glued in place, and the shirt has plastic plating for his chest and shoulders, as well as a sculpted insignia at the center.  Beyond that, the detailing is down to tailoring, which looks pretty solid for this scale.  Some of the stitching is a little bit larger than it should be, but, of course, there’s only so much that can be done about that.  The base suit is topped off by his harness, belt, and boots.  The harness is largely cloth, as you would expect, and is again a well-tailored translation of the design seen in he film.  The belt sits a little bit low, but overall looks alright, and is attached permanently to the suit.  The boots are sculpted, but unlike earlier sculpted boots, which sacrificed articulation for the sake of aesthetics, these ones are jointed at the ankles, allowing for much better options when posing.  It’s definitely a much appreciated improvement for me.

Cap’s underlying body captures Evans’ proportions pretty nicely and is one of the more basic ones, which prioritizes function over form.  After the first few Caps placed him on slightly less articulated muscle bodies, I do appreciate one that’s more cleanly designed for posing.  The nature of his costume design does impede some of the movement ever so slightly.  For the most part, the upper torso fares alright in terms of range, though the shoulders are a little tight for some poses.  The pants are rather restricting, especially at the hips, but with some slight shifting, it’s workable.  He just won’t be getting into any deep lunges or anything.

In addition to getting the previously mentioned extra head and mouth plates, Cap gets a rather extensive selection of other extras for a whole ton of options for display.  Included are:

  • 7 hands
  • 2 shields
  • Mjolnir
  • Compass
  • Empty helmet
  • Display stand

The hands include fists, gripping, pointing (right), open gesture (right), and loose grip (left).  They pretty much cover all of the needed options for posing, and look suitably realistic, including some solid detail work on his gloves.  They also swap out pretty easily, considering my prior experiences with Hot Toys.  The two shields give you both standard (if a bit scuffed), and damaged, which also includes the broken shards, which I certainly wasn’t expecting.  The shields also include a piece that can swap out for one of the straps, which allows you to hang one of them on his back.  Mjolnir is similar in styling to the one included with Thor, but this time around the top is plastic, rather than metal.  While it doesn’t have that same impressive heft, it also won’t leave his wrist joint all floppy and loose after a few months posed holding it aloft.  The compass is properly hinged, and even has the small photo of Peggy in it, as seen in the movie.  The helmet matches the helmeted head, minus the head, of course, and can be held when he’s using the unmasked head.  The stand swaps out the old basic oval design for a hexagonal design featuring a design based on the movie branding.  It does its job well, and has a rather clean design, which works pretty well.

THE ME HALF OF THE EQUATION

Completing the first Avengers line-up was really my last hurrah for Hot Toys collecting, and I’ve not really been keeping up with it since.  However, when I walked out of the theater after seeing Endgame, I pretty much wanted this Cap design in any form I could get.  I placed my order for this guy as soon as he was available.  It’s been quite a long wait for him, given he was supposed to be slated for last year, but I was certainly okay with being patient.  Ultimately, this figure wound up as part of my path to figuring out my new normal, since he finally shipped just a week after Jess’s passing.  It’s weird, I suppose, but maybe sort of fitting, since I had moved past Hot Toys collecting when she and I started dating.  It was definitely weird not getting to experience this one with a companion, but I’m starting to find my footing on what I like purely for me.  I do like this figure.  I took me a little bit of time to get back into enjoying a Hot Toys figure the same way I used to, but he’s a good re-entry into the style.  I’m not jumping back into these full force, but I am going to keep up with my Captain America chronology at the very least.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#2820: Frontline Captain America & Bucky

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

FRONTLINE CAPTAIN AMERICA & BUCKY

MARVEL MINIMATES

With the MCU really entering it’s post-Endgame slate, and building up some of the more minor characters, it’s sort of nice to take a step back and look at how far some of these characters have come.  Before they were respectively a hero who is the idol of millions and all-around very hard to replace icon and a sleeper-agent assassin-turned repentant hero, Steve Rogers and James “Bucky” Barnes were just two best friends, dragged into Hydra’s off-shoot of World War II.  Fortunately, DST gave us a pairing of the two before all those changes, just so we can reminisce!

THE FIGURES THEMSELVES

Frontline Captain America and Bucky were released in Series 40 of Marvel Minimates, as well as the TRU-exclusive The First Avenger tie-in assortment, both of which hit in the early summer of 2011.

FRONTLINE CAPTAIN AMERICA

Frontline Captain America, or Rescue Cap as he’s been dubbed elsewhere, serves as Cap’s Mark I equivalent, a hastily thrown together get-up borne out of necessity.  It’s a call-back not only to the Jack Kirby days when Steve would be seen from time to time in his military fatigues with the Cap costume peaking out, but also to Cap’s WW2 era costume from The Ultimates.  It also brings to mind some memories of the hero of Joe Johnson’s other WW2 era super hero movie, The Rocketeer.  Though short-lived in the movie, its presence during Cap’s first real action scene makes it quite memorable.  The figure is built on the standard ‘mate body, so he’s about 2 1/4 inches tall and he has 14 points of articulation.  Cap uses two add-on pieces: his helmet and his jacket.  The helmet is shared with his assortment-mate Gabe Jones, and works well as a pretty standard helmet.  It sits closer to the head than the previously used Sgt Rock helmet, making it so that hair is not visible, and he doesn’t look bald with it in place.  If you want to get picky, the helmet really should have some goggles on it, but he does lose them in the movie, so it’s not completely inaccurate.  The jacket is  unique to this figure, and features all of the gear Cap was carrying during his raid on the POW camp.  There’s a lot of really great detail work going on there.  I might have preferred the belt to have been a separate piece, but it still works quite well the way it is here.  He also gets a slightly tweaked left hand, designed for attaching his shield.  The paintwork on Frontline Cap is a little bit of a mixed bag.  The linework on his face and torso is really sharp, and the colors are all pretty well chosen.  That said, there’s a fair bit of bleed over on his jacket, and the lines on his legs are somewhat ill-defined.  The closeness of some of the colors on the palette helps to mask it a bit, though.  On the plus side, the face presents a reasonable likeness of Chris Evans as Cap, and I quite like the more intense expression.  Frontline Cap is packed with his original, non-circular shield, which can be placed either on his hand or on his back.  He also includes a handgun (re-used from Blackhawk) and an extra hairpiece for an unhelmeted look.

BUCKY

For the first film, Bucky wasn’t a super soldier like Cap, but he wasn’t quite the comics version of the kid sidekick either.  The movie instead aimed to more foreshadow his eventual return as the Winter Soldier, setting him up as the Howling Commandos’ sharp-shooter.  In terms of design, he actually got a pretty close adaptation of his original comics design, albeit with a more proper military flair to it and some more toned down colors.  Bucky has add-ons for his hair and jacket.  Both of these were new to this particular figure. Interestingly, the hair on the prototype was a different piece, the same one used on Dr. Reed from the Creature From the Black Lagoon boxed set.  No idea why they made the change, and personally I would have preferred the re-used piece.  As it stands, this one’s not terrible, though.  It just sits a little low for my liking.  The jacket piece seems a bit bulky, truth be told, and I think he might have looked better with it just painted on his chest block instead.  Bucky’s paint is reasonable, but not without its flaws.  The slop is a little less of an issue here than it was with Cap, but it’s still somewhat present.  The likeness on the face isn’t a nice as I’d like.  It appears that something happened in-between the control art and the final ‘mate, which has caused his eyes to be sort of oddly placed.  It looks rather strange.  Sgt. Barnes is decently accessorized, including his sniper rifle and the same style of handgun included with Steve.

THE ME HALF OF THE EQUATION

I picked this set up when it was new, courtesy of Cosmic Comix.  Though non-standard, this is really a winning version of Cap.  There are some slight flaws, but he’s an overall very cool figure, and he’s really my favorite design for the character.  I’m glad he was such an early inclusion.  This was only Bucky’s second ‘mate, and after the slightly flawed first one, I’d hoped this one would turn out better.  Though far from terrible, this figure has a lot of smaller issues that add up to a rather forgettable Minimate.