#1700: Rey – Island Journey

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

REY – ISLAND JOURNEY

STAR WARS: THE BLACK SERIES

“With the power of the Force awakening inside of her, Rey travels to the hidden world of Ahch-To. There, she seeks out Luke Skywalker as the last hope of the Resistance.”

I’ve bought a lot of Star Wars figures recently.  Try as I may to space them out, sometimes you’ve just got to paraphrase Tom Cruise and say “What the heck?” and do a week of Black Series reviews.  Because that’s just how I roll.  So, let’s kick this week off by answering the that question I love answering, “Where’s Rey?”  She’s right here!

THE FIGURE ITSELF

Rey (Island Journey) is figure 58 in Star Wars: The Black Series.  She originally hit alongside DJ and Captain Rex in the first assortment of 2018, and she’s also received a re-pack alongside the Solo-themed offerings.  She was originally shown off prior to the Last Jedi releases, intended as a Force Awakens release.  But, since her Resistance togs appeared in both films, it was pretty easily re-fitted into a Last Jedi variant.  The figure stands 5 3/4 inches tall and she has 27 points of articulation.  Rey sports a mostly new sculpt, with her arms and hands being re-used from the Jedi Training version of the character.  I had initially thought this caused a slight inaccuracy on the figure, since she’s lacking the wrist covers that go with the resistance outfit.  However, after double-checking various stills from the movie, she actually removes those covers for some parts of TLJ, especially when she’s wearing the poncho that this figure added.  So, the re-use is actually warranted here.  The rest of the sculpt is really quite good.  The proportions are nicely balanced, and the details of her outfit are sharply defined.  The vest piece can be removed, and she manages to not look totally goofy without it, which is a plus.  My favorite part of the sculpt is definitely the head, which is my favorite Rey headsculpt yet (it’s managed to supplant the Titan Heroes sculpt), and has a really strong Daisy Ridley likeness.  As with the previously reviewed Han Solo (who Rey actually predates, of course), the paintwork on Rey is really strong, and helps to further elevate an already strong sculpt.  Her assortment premiered the introduction of Hasbro’s new face-printing technique into The Black Series.  As with Han, this adds a much more lifelike quality to the figure, almost on par with the likes of Hot Toys, and just makes the figure look that much better.  In terms of extras, Rey is pretty well packed, coming with her staff, blaster, and Luke’s lightsaber (all shared with the Jedi Training figure), as well as the poncho she’s seen sporting on Ahch-To.  The poncho’s just a simple cloth piece, but it’s better tailored to the figure than prior softgoods pieces from this line, and it does add a lot more to display options.  I’m kind of a sucker for a nice poncho.

THE ME HALF OF THE EQUATION

Rey’s Resistance look is definitely my favorite of her three designs, so I’ve been on-board with this figure since day one.  The announcement that she was getting the poncho from TLJ and would be introducing the face-print tech only got me more on-board.  Of course, I had to find her first, which proved a little difficult.  I never lucked into her in her initial case packout, but the reissue made her a little easier to track down, and I was able to get her through Super Awesome Girlfriend’s work.  This is a really nice figure, and hands down my favorite Rey.  I liked the Jedi Training version quite a bit, but this one blows it out of the water.

#1699: Howard Stark, Peggy Carter, & Hydra Agent

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

HOWARD STARK, PEGGY CARTER, & HYDRA AGENTS

MARVEL MINIMATES

The civilians in superhero stories are very important to the mythos, but sadly, as rather average looking people, they don’t exactly lend themselves to lots of toys, no matter their prominence in the stories they hail from.  Fortunately, there are lines like Minimates, which are able to take advantage of their slightly different distribution methods to get us characters we might not otherwise see.  Take, for instance, today’s focuses, Howard Stark and Peggy Carter!

THE FIGURES THEMSELVES

Howard, Peggy, and the Hydra Agent made up the specialty-exclusive component of the First Avenger-themed ‘mates, released in Series 40 of the main Marvel Minimates line.  Howard was the heavier packed of the two, with Peggy being his one-per-case “variant.”  In light of the movie and Peggy’s later importance moving forward, this was, and still is, an odd sort of case pack-out, but I guess they really wanted to make sure everyone had a chance at a young Howard.

HOWARD STARK

The young Howard Stark presented in The First Avenger is clearly influenced by another famous Howard, aeronautics pioneer Howard Hughes.  Director Joe Johnson had experience with Hughes, having used him in the film adaptation of The Rocketeer, so I guess he was just going with what he was comfortable with.  The figure is built on the standard ‘mate body, so he’s about 2 1/4 inches tall and he has 14 points of articulation.  Howard has two add-on pieces, for his hair and his suit jacket.  Both are re-used, from the Universal Monsters line, in fact.  The hair is from Creature From the Black Lagoon’s Dr. Reed, and the jacket is from The Wolfman’s Laurence Talbot.  Given the similar time-period of all of the films in question, the re-use is pretty sensible.  Additionally, it’s nice to see the pieces made from slightly higher grade plastic, as it allows the details to show through a lot better.  His paintwork is somewhat on the drab side, being mostly greasy and the like.  The face has a reasonable likeness of Dominic Cooper, though he’s more of a generic Howard sort of look.  I might have liked a more expressive face, but this works well enough.  Howard is packed with a hat (re-used from The Spirit line), which can be swapped out for the hair.

PEGGY CARTER

It seems crazy to me that this is the only Peggy Carter action figure out there.  It’s also true of Howard, of course, but he’s more of a supporting player.  You’d expect Peggy to get a little more respect, wouldn’t you?  Though, I suppose it’s fitting that a character like Peggy wouldn’t be getting the respect she deserved.  At least she got this.  She’s got two add-on pieces, one for her hair, and one for her skirt.  Both are re-used, though the hair was originally meant for Peggy, but ended up going on the First Class Emma Frost first.  It works well enough for the look they’re going for.  The skirt piece is the same one used on Gwen Stacy, and it’s a standard piece that is still in use now.  It all replicates her uniformed look from the movie nicely (though, if we’re being picky, I personally would have preferred her Hydra base-storming gear from the end of the movie; oh well).  Her paintwork is a little more detailed than Howard’s, since she’s not relying on sculpting for the torso detailing.  The detail work is nice and sharp, and her face even has a decent likeness of Haley Atwell, though it’s once again a little void of expression.  Peggy is packed with a Thompson machine gun, first seen with another WW2 hero, Sgt Rock.  It’s a little tricky to hold, but it’s a nice piece.

HYDRA AGENT

Also offered in the army builder singles case, the basic Hydra Agent was easily one of the most sensible MCU army builders to grace the ‘mate line.  There’s a whole ton of these guys running around getting plowed through by Cap and the Howling Commandos, so getting a minimum of two to start with here was great.  The figures are add-on heavy, with pieces for their masks, straps/skirts, and glove cuffs.  Apart from the glove cuffs (which are, appropriately, re-used from Captain America), the other pieces were new to these guys.  Or, at least, they were new to this general assortment, since the parts are shared with the other variations of Hydra agent.  The pieces match up well with the film design, and the detail work is pretty clean.  The paintwork is pretty decent, and features more detailing than you might notice at first glance.  Perhaps the coolest part is what’s under the mask piece; since there were a few different Hydra masks seen in the movie, this one has the bulked up look, as well as a more streamlined design beneath it.  It adds an extra element of customization to them, which makes the army building all the more fun.  The Hydra Agents were both packed with a rifle, which has remained exclusive to the First Avengers offerings.

THE ME HALF OF THE EQUATION

I picked both of these sets up new from Cosmic Comix.  These were actually the sets I was most excited for at the time, and while they are perhaps not the most thrilling designs, I still really like them all.  The execution is definitely there.  And where else are you going to get Howard Stark and Peggy Carter action figures?  No where!

The Blaster In Question #0057: Vigilon

Posted by Tim Marron in Nerf Reviews and tagged with , , , , ,

BlasterInQuestion1

VIGILON

VORTEX

vigilon1I know what you’re about to ask, so let me go ahead and answer it before you do.  No, I’ve still not heard anything from Mads but I’m staying optimistic.  That’s not what you were gonna ask?  Ok, weirdo.  Oh, right, that.  Yeah, I have no idea what the heck a vigilon is either but it’s the name of this week’s blaster.  Maybe taking a look at the blaster will inform us on the matter.  Let’s find out if that’s the case.

THE BLASTER ITSELF

vigilon2It’s not the case, it’s a made up word.  Anyway, the Vigilon was released in 2011 as part of the Vortex series of blasters.  It then disappeared with the apparent death of the Vortex line a few years later, only to be brought back in 2018 in the Target exclusive Vortex VTX line-up.  Really all that changed is the colors, so I’ll be reviewing them both as the same blaster here.  The Vigilon uses the same mechanism for launching the Vortex discs as most blasters in the line but with the added bonus of an integrated internal magazine that holds (officially) 5 discs.  I find it odd that the Vigilon has only ever been marketed as a 5-round blaster despite the fact that I can fit 6 discs in the magazine just fine without using any trickery, plus, you can keep another disc in the chamber, effectively giving the blaster a 7-round capacity.  The magazine vigilon3itself is an interesting design in which you open the loading gate with the release levers just above the trigger and load rounds in the side of the blaster rather than the top or front like we’re used to seeing on dart blasters.  Releasing the magazine cover is also rather satisfyingly snappy and makes it feel like something akin to a plasma weapon from the Halo franchise venting heat.  The outer shell is all original to the Vigilon, and while the green and orange color scheme of the first wave was fine at the time, the sky blue/neon green VTX colors really do it for me.  Just- MM, so good.  Naturally, the new colors are also carried over to the ammo which also looks quite nice and again, an improvement over the older version.  I mean, they work the same, they just look nicer while they do it.  The Vigilon gets the same performance as just about every other Vortex blaster out there.  The discs do travel far, but they vigilon4slow down as they fly through the air and end up floating a bit near the end of their flight path.  If you’re planning on using this as a weapon against your younger siblings, just make sure they’re not too far away, otherwise, even if your shots hit, they won’t have nearly the same impact as they would at closer range.  Plus, with some practice, you can do crazy stuff like bank shots off the wall and whatnot.  Then you can really make them feel like they’ll never be safe again, and isn’t that really the goal?  What do you mean that sounds abusive?  I’m just saying they shouldn’t feel completely at ease in their own home cuz they’ll never see the radtastic VTX discs coming.  Well, yeah, when you say it like that, you can make anything sound like abuse.  Anyway, the original Vigilon came packaged with just 5 Vortex discs, but the new VTX version comes with 10 and they look way cooler to boot.

THE ME HALF OF THE EQUATION 

I don’t normally care too much about straight recolors, but the Vortex series was different and innovative in a way not often seen in the toy blaster market.  Moreover, it seemed to garner a decent fan base over traditional darts, so it’s fairly unique in that regard.  In reality, though, I just think the folks over at Nerf did a great job with the new colors.  I wish this had been what Vortex looked like from the get-go.  It’s just so- MMM, I love it.

#1698: Probe Droid

Posted by Ethan Wilson in Reviews and tagged with , , , ,

PROBE DROID

STAR WARS: POWER OF THE FORCE II (KENNER)

After some rather goofy offerings to kick off the deluxe sub-set of their Power of the Force II line, Kenner followed up with some downright sensible offerings.  In the ‘90s.  I know, it was weird.  I was there, and I thought so.  But that’s not the point.  The point today is that I’m reviewing the very first figure of the Imperial Probe Droid.  Woooo!

THE FIGURE ITSELF

The Probe Droid was released in the 1997 deluxe assortment of Power of the Force II figures.  It’s based on the droid’s appearance in Empire, which was, at the time, its only canon appearance.  The figure stands 4 1/2 inches tall and has 6 points of articulation.  Not above the norm on movement, but a bit surprising, given the different anatomy of the design.  It also gets more mobility, since the limbs are all on ball-joints, which is pretty cool.  The figure has a sculpt that was, up until very recently, the only Probe Droid sculpt out there.  It’s not 100% accurate to the model from the film, but it’s certainly good for this era of figures, especially when compared to some of the humanoid figures from the line.  There was definitely a reason this sculpt stuck around.  There were some minor fixes to the proportions that were fixed on the more recent one, such as a slightly smaller head, and slightly longer legs.  The legs in particular have been tweaked so that it can actually stand on them, rather than relying on a flight stand like the more recent figure.  It’s the biggest departure of the figure, but it’s sensible from a practicality standpoint.  The paintwork on the Probe Droid is pretty decent, especially for the time and design.  Technically, the base plastic should be a little darker, but it works alright, and there are lots of small little details.  The Probe Droid features two different action features.  The first is a “Photon Torpedo,” which is just a fairly standard missile launching feature, which fires from its eye.  It has the side effect of making the central eye bright orange, which is kind of weird, but there it is.  The second feature is a “Self-Destruct Exploding Head” which works in a similar fashion to the missile launcher above, just at a slightly larger scale.

THE ME HALF OF THE EQUATION

The Last Jedi release was my first Probe Droid, and I liked him enough to be on the look out for this figure.  I ended up grabbing it from Lost in Time Toys, during one of their winter sidewalk sales.  Though the newer one is still the superior offering, there’s still a lot to like about this release.

#1697: Sasquatch

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SASQUATCH

MARVEL LEGENDS (HASBRO)

Huzzah!  Another Build-A-Figure is complete.  And, like last year’s Titus, this one was sort of by accident.  It’s not that I *don’t* like Sasquatch, and I certainly know more about him than I did the cyborg Tony the Tiger, but Deadpool-themed assortment with an Alpha Flight-themed Build-A-Figure doesn’t immediately jump out at me.  However, here we are, so I might as well review this thing.

THE FIGURE ITSELF

Sasquatch is the Build-A-Figure for the somewhat predictably named Sasquatch Series of Marvel Legends, which is also the first of 2018’s two Deadpool-centric series.  His connection to Deadpool’s tenuous at best, but they *are* both Canadian, so I guess there’s that.  I’d also point out that this and the next assortment feel more like extensions of the X-Men subline more than anything, and that’s definitely a theme Sasquatch fits right into.  This is Sasquatch’s second time as a Marvel Legend; the last one was back during the Toy Biz days, when it was still cost effective to do such a large figure as a single-packed figure, rather than splitting him up.  This figure stands 8 1/4 inches tall and he has 28 points of articulation.  Despite some claims to the contrary, he’s an all-new sculpt.  Nothing on him is shared with last year’s Man-Thing BaF.  They may share some common ancestry somewhere along the way, but the final products aren’t the same at all.  Sasquatch’s sculpt is definitely bulkier than his last figure, and overall does a pretty great job of capturing a non-artist specific version of the character.  I quite like the calmer facial expression they’ve gone with here; it’s a nice change of pace from what we’ve seen in the past.  One thing I did notice about Sasquatch that I’ve been seeing crop up with more recent BaFs is how easily he pops back apart.  I don’t want quite go back to the days of no disassembly that we had going for a little while there, but my Sasquatch has a tendency to fall apart during fairly routine posing, which is more than a little annoying.  Sasquatch’s paint work is decent, but it runs into a problem we’ve seen before on BaFs like this.  What are meant to be subtle changes in the shading of his fur are made less subtle by the slight variations from piece to piece clashing on the fully assembled product.  It’s not terrible, but you can definitely see some rather jarring jumps on my figure.  With that said, I do prefer this to a shadingless lump of orange.

THE ME HALF OF THE EQUATION

So, like I mentioned it the intro, I really didn’t mean to finish this guy.  I got Deathlok and X-23 back in February, and I kind of thought that was the end of it.  Then I got Cable because I like the animated series, and I thought I might regret missing out on him.  Then I got Domino and Paladin because of coupon deals.  And then, all of the sudden, I had this headless Sasquatch sitting on my desk, and that seemed a little silly, so X-Force Deadpool was purchased and here we are.  This whole assortment is something of a sleeper hit for me.  I expected nothing from it, but I’m honestly pretty happy with it as a whole, and there are some definite pleasant surprises, Sasquatch included.

#1696: Paladin

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

PALADIN

MARVEL LEGENDS (HASBRO)

“Paladin is a mercenary marksman who always has his eye on the bottom line.”

Ah, Paladin.  Truly the most–he’s really quite the–okay, I don’t have a lot to say about Paladin.  I mean, to be fair, nobody really does.  In the 40 years since his introduction, he’s not actually gotten much of a backstory…or anything, for that matter.  He just sort of exists to fill a mercenary slot when needed.  Like in this Deadpool-themed Marvel Legends assortment.

THE FIGURE ITSELF

Paladin is the final figure in the Sasquatch Series of Marvel Legends.  He’s based on a more modern incarnation of the character, from around his time with the Thunderbolts.  Not his most memorable or distinctive look, but there’s a clear rationale behind this design choice, and that rationale is parts re-use.  I’ll get to that momentarily.  The figure stands 6 1/4 inches tall and he has 32 points of articulation.  As noted above, Paladin makes use of some parts re-use, though not as much I’d initially thought.  He’s built on the body used by the last Blade figure (which in turn re-used some parts from the ASM2 Electro).  He gets a new head, forearms, hands, and shins, as well as a holster add-on piece which appears to be new, but I could be wrong on that.  The new parts are decent recreations of his comics designs.  The head’s suitably generic, and the padded forearms and shins help to differentiate him from Blade.  The holster is mostly just there to hide that Hasbro still hasn’t re-tooled the Electro legs to remove that little nodule on his left thigh.  Paladin’s paint work is really the main thing that signifies his modern influences.  His palette is swapped from the classic look, which was purple armor on black, rather than black armor on purple.  I find this isn’t quite as striking a design, but I suppose it’s not terrible.  The application is at the very least cleanly handled, so I’ll give him that.  Paladin is packed with a pair of golden pistols (re-used from Zemo) and a knife.  The knife can be nicely slotted into the sheath on his boot, which is cool.  Unfortunately, there’s one holster for two guns, and the guns don’t actually sit that well in the holster.  That’s kind of disappointing.  He also includes another leg to the Build-A-Figure Sasquatch.

THE ME HALF OF THE EQUATION

Paladin slightly frustrated me.  When I heard they were making him, I was kind of excited, but when the prototype was unveiled with the modern look, I was a bit let down.  The more streamlined modern Paladin design facilitates the re-use more than the classic look would have, I suppose, but I can’t say I’m super into it.  I feel like with the amount of new pieces he got in the end, it wouldn’t have been too much of a stretch to go for an approximation of his classic design.  Because of this, I ended up passing on him the first few times I found him.  I ended up getting a bunch of store credit for Cosmic Comix after helping out on Free Comic Book Day, and they had this guy, so I ended up grabbing him from them.  He’s not a bad figure at all, and certainly works as a generic merc, but I do wish he were a little more distinctive.

#1695: Cable

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CABLE

MARVEL LEGENDS (HASBRO)

“A powerful mercenary, Cable uses telekinetic abilities and combat expertise to get the job done.”

I started off my last Cable review by making fun of his box-bio’s hefty simplification of the character’s complex backstory.  For this one, I’m willing to cut Hasbro a little slack, since the character was presented in a much more simplified form in Deadpool 2, his appearance in which is one of the primary reasons he got this figure in the first place. Despite his lessened presence in the franchise in recent years, he gotten no less than two separate Marvel Legends releases in two years.  I’ve already looked at the first, and now I’m looking at the second.

THE FIGURE ITSELF

Cable is figure 3 in the Sasquatch Series of Marvel Legends, joining Deadpool and Domino in the loose DP2 theme of the assortment. He’s based on a more classic look than the last Cable.  It’s a costume that was prominent on a few covers in the ’90s (though less so the actual interiors; that’s just how ’90s comics do), notably the cover to X-Force #1. It was also the look Cable was sporting on his first action figure, and in the X-Men cartoon.  It’s about as quintessential as you get for Cable looks.  The figure stands just over 7 inches tall and he has 30 points of articulation.  Like his predecessor, this Cable figure is built on the Hyperion body, though the actual pieces shared between the two are pretty minimal.  For the most part, this guy uses the Nuke variant of the body (so, he’s got the cargo pants and combat boots), but he gets a new head and arms (which are all distinct from the prior Cable figure, it should be noted), as well as an overlay piece for his shoulderpads/belt/suspenders, and another for his collar.  The head is the star part here, of course, and it manages to capture the spirit of Liefeld’s illustrations without really getting into the drawbacks behind them.  I particularly like how they’ve captured his glowing eye; that’s a nice touch.  The overlay piece is a little loose for my tastes, but it looks nice, and it means that Cable’s finally got shoulderpads!  Yay!  Cable’s paintwork is a good match for the palette that goes with this design, and the application, though sparse, is all clean.  Cable, being all about the guns, naturally includes three of them.  The biggest of them is an original design, and looks exactly like the sort of thing Cable would be brandishing on a cover in the ’90s.  There are also two smaller guns, which, fun fact, are both scaled-down Nerf guns.  The larger of the two is the Doomlands Vagabond, while the smaller is based on the Barrel Break.  They’re both nice gun designs, and they fit the style of the character quite well.  Thanks to our resident Nerf-expert Tim for helping identify the exact models!  I certainly hope this trend of scaling down Nerf guns continues.

THE ME HALF OF THE EQUATION

I had a moderate interest in this figure.  I’m not the world’s biggest Cable fan or anything, but the fact that this is the design from the cartoon really gave me a reason to track him down.  Of course, he’s the most demanded in the set by far, so I missed him several times.  I eventually found him at Cosmic Comix, who got a case in a few weeks ago.  He’s a goofy figure to be sure, but that’s sort of the point.  I love him for what he is, though.

#1694: Domino

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

DOMINO

MARVEL LEGENDS (HASBRO)

“Domino creates her own luck with a subconscious ability to predict the success of any given action.”

In the ’90s, there was this quiet sort of trend amongst new X-Men characters, where they took the basic power set of a prior character, but added “carries a lot of guns” to them, and there they were.  Domino was amongst that crop of characters, taking the luck-based gimmick of Longshot, and…adding guns.  The luck bit tends to get pushed to the side, but that’s seeming to change, with her new solo series and appearance in Deadpool 2.  She’s also gotten another Marvel Legends release along the way.

THE FIGURE ITSELF

Domino is figure 3 in the Sasquatch Series of Marvel Legends.  She’s definitely based on a more recent incarnation of the character, though I’m not really familiar enough with her history to pinpoint exactly which costume this one is wearing.  I’m thinking this is meant to be the costume she wore during her run with Wolverine’s X-Force?  Whatever the case, it’s a fairly decent summation of her various looks over the years, and has the benefit of not looking anywhere near as terrible as some of them.  The figure stands 6 inches tall and she has 27 points of articulation.  Domino shares quite a few pieces with 2016’s Mockingbird figure.  She gets a new head, hands, and a slightly tweaked torso that removes some buttons.  Mockingbird’s sculpt was a pretty good one, and although it’s got some more specific details than others, they don’t stand out so much as to make the re-use to exceedingly obvious.  Also helping in keeping the two unique from each other are the shoulder harness and belt add-on pieces, which fit Domino’s more prepared nature.  It adds up to a solid looking sculpt that the average onlooker probably wouldn’t realize had any re-use.  Her paintwork is appropriately stark and contrast-y.  The mostly black and white thing translates quite well here, and the few bits of silver we get break it up pretty well.  The application is all nice and sharp.  The prior Domino Legends figure got pretty standard guns.  This one goes slightly more unique, but not at the same time.  The two guns included with this figure are the actually scaled down from the pair included with the 12-inch Legends Deadpool figures, and as an added bonus, the smaller of those two guns is actually based on Hasbro’s own Nerf Vortex Diatron (thanks to our in-house Nerf-expert Tim for spotting that one).  In addition to the guns, Domino also includes the right arm of Sasquatch.

THE ME HALF OF THE EQUATION

Had the TRU that I purchased Deathlok from had a Domino in-stock, I would have likely gotten her instead of X-23.  But they didn’t, so I didn’t.  Given how much I liked the X-23 figure, that was probably for the best.  Nevertheless, it did spark in me a moderate desire to grab a Domino figure.  I ended up taking advantage of a Barnes & Noble coupon I had to get her for a pretty good deal.  Though I’m not overly familiar with her (I say as a man who owns three action figures of the character), I do quite like this figure.  She’s a lot of fun!

*Want a Domino figure of your own?  She’s currently in-stock with our sponsors over at All Time Toys!  Click here to check her out!

#1693: X-Force Deadpool

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

X-FORCE DEADPOOL

MARVEL LEGENDS (HASBRO)

“Need someone to do the dirty work? Great news: that’s his favorite kind of work.”

This spring has been jam-packed when it comes to big blockbusters.  Wedged in-between event-film-10-years-in-the-making that was Infinity War and the decidedly-smaller-scale-but-base-breaking Solo, was the somewhat quieter, more laid back Deadpool 2.  I was apparently one of the few people on the planet not terribly thrilled by the first one, so I wasn’t expecting much from the sequel, but I actually rather liked it.  As a Fox-produced film, it’s got no direct merchandise from Hasbro, but it did get an assortment of loosely themed Marvel Legends.  There were two variants of the title character included, and I’ll be looking at one of those today.

THE FIGURE ITSELF

X-Force Deadpool is numerically the first figure in the Sasquatch Series of Marvel Legends.  A quite similar figure was released earlier, as an exclusive to HasCon 2017.  While the main figures are similar, they are not identical, and the accessory complements are completely different.  Both figures are based on Deadpool’s more monochromatic look from the pages of Uncanny X-Force, which is coincidentally quite similar to how Wade looks after taking a fair bit of damage in the final act of Deadpool 2.  The figure stands 6 1/4 inches tall and has 32 points of articulation. On the outside, the figure’s doesn’t seem all that different from the one released two years ago in the Juggernaut Series, but he’s actually more different than you might think.  They share the same base body (the Bucky Cap), and the same head.  They also share the same shoulder harness and thigh holster.  Beyond that, he gets a new belt, wristbands, and ankle bands.  They succeed in making the figure moderately different, and by extension, more accurate to the original source material than a simple recolor would have been.  Even the paint masking is a bit different, and not just a simple palette swap.  The shaping of the black sections of his costume are actually the inverses of the last figure’s, which is another point in the accuracy column.  Sadly, Deadpool’s accessories have been stepped way back from both the HasCon offering of this costume and the prior standard release.  Still, he does get the swords, the rail gun, and the pistol (both painted in a fun blue color that makes them look vaguely Nerf-ish), and he also comes with the head of Sasquatch.

THE ME HALF OF THE EQUATION

I had no real intent to pick up this figure.  I have the standard colors version from 2016, and I figured that was good enough.  Then I ended up with every other figure from the set, and I saw DP2, and I found myself kind of wanting this figure.  Sadly, by that point he’d sold out pretty much everywhere.  I eventually found him on Amazon for base retail, and here we are.  He’s a surprisingly enjoyable figure, and I’m happy I tracked him down.

#1692: Robin

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ROBIN

DC UNIVERSE CLASSICS (MATTEL)

In a similar fashion to Toy Biz’s early Marvel Legends offerings skipping any thing Spider-Man-related due the Spider-Man Classics line that sort of launched Legends, thanks to the lead-in DC Superheroes line, Mattel’s DC Universe Classics was slightly slower introducing Batman and Superman-themed figures.  While Batman found himself in the line’s first series, he would have to wait another two series before getting his trusty sidekick, Robin.

THE FIGURE ITSELF

Robin was initially released in Series 3 of DC Universe Classics, and then ultimately re-released in the World’s Greatest Superheroes sub-line.  He was Mattel’s second go at Robin, following the mold that went back to their original Batman line.  This one is based on Tim Drake, the third Robin, and still the current one at the time of this figure’s release.  He’s seen here in the costume he was wearing at the time, which was introduced following the “One Year Later” time-jump caused by Infinite Crisis and 52.  It’s a design that doesn’t quite have the staying power of Tim’s prior look, but it did stick around for a few years, and it’s certainly not terrible.  The figure stands 5 1/2 inches tall and he has 23 points of articulation.  This figure’s biggest flaw is his height.  He was a full inch shorter than the standard adult male from this line, but not in a “oh, he’s just a teenager who isn’t fully grown yet” way.  He actually looks like he’s a smaller scale than the rest of the figures.  It’s especially annoying because the later Red Robin figure, meant to represent Tim from just a few years later in the timeline, was just on the standard male body.  That wasn’t the right fit either, but at least he looked vaguely right scale-wise.  The most frustrating about the height issue is that the figure’s sculpt is actually pretty good.  Robin lacks some of the more annoying stylistic elements of the larger bodies, such as the goofy larger shoulders, or the painfully obvious hip joints.  His proportions are fairly balanced, and there are actually quite a few uniquely sculpted pieces, such as the buckles on his tunic and his utility belt, which add a lot of character to the figure.  The head’s maybe more of an early career Tim than one in this costume should be, but it still looks quite nice, and even the cape is a pretty solid sculpt.  Purely from an internal standpoint, it’s a strong sculpt.  Even his paintwork’s not terrible.  I mean, there’s no crazy detail work or anything, but the application is all pretty clean, and there’s some slight accent work on the red sections of the costume.  He was originally packed with a combat staff and the left arm of the Collect-N-Connect Solomon Grundy.  The re-release (which is the one I had), dropped the CnC piece.

THE ME HALF OF THE EQUATION

When Series 3 of DCUC was unveiled I was thrilled.  I wanted every figure in the set.  To date, of the five figures (six if you included the CnC), I own three, and this one’s not even the original release.  Why?  Mattel’s sucky distribution, that’s why.  I desperately wanted Robin, but I never actually saw him at retail, so I finally settled for the re-release, which I found at Baltimore Comic-Con a few years back.  He’s a frustrating figure.  I love so much about him, but he’s cursed never to really fit-in with his line-mates.  Fortunately, last fall I got the similarly mis-scaled DC Icons Batman, so at least they both have a companion.