#1406: Spider-Man – Cosmic

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

SPIDER-MAN – COSMIC

MARVEL LEGENDS (HASBRO)

“With incredible strength, stamina and cosmic senses, Spider-Man battles tirelessly on the side of universal justice.”

So, as you may have pieced together from my review of Moon Knight yesterday, I’ve finally tracked down the entirety of the latest Spider-Man Series of Marvel Legends.  This particular series is about half Spider-Men variants, so I’ll be alternating between Spider-Men and non-Spider-Men.  Today’s Spider-Variant actually has roots in another toyline: Micronauts.  Marvel’s tie-in comic for the line added a whole lot of original concepts, including the Uni-Power, an extra-dimensional force that imbues its host with the great cosmic power, thus transforming them into Captain Universe.  The Uni-Power’s been passed around a lot; that’s kind of part of its gimmick.  One of the hosts was Peter Parker, because that’s what happens when you sell the most comics. That’s where today’s figure comes into play.

THE FIGURE ITSELF

Spider-Man (that’s what the packaging says; just “Spider-Man.”  How is the average consumer to know of is cosmic-ness?) was released in the Homecoming-tie-in series of Marvel Legends. In the main universe, Peter gave up the Uni-Power, but there have been a couple of alternate universe versions of him that didn’t.  This figure appears to take the most influence from the Peter Parker of Earth-13, who played a decent role in the “Spider-Verse” event.  The figure stands about 6 1/2 inches tall and he has 32 points of articulation.  This guy marks the second use of the Spider-UK body.  It befits the more powerful and experienced nature of the Earth-13 Peter, and it’s still a favorite of mine.  I hope we see it used for more than just Spider-Men moving forward.  The standard masked head is pretty basic; I won’t be surprised to see it turn up on other masked characters.  It’s a decent enough piece, I guess.  I wish the chin were just a little more pronounced, but it’s a minor complaint.  There are two additional heads.  The first is an unmasked Parker, whose beard signifies that is definitely the Earth-13 version.  He’s not directly patterned on the art of Oliver Copiel (who drew most of Earth-13 Peter’s appearances), going instead for a more general look.  It’s a very nice sculpt, and one of Hasbro’s better human heads.  The second head isn’t a Spider-Man head at all; instead, it’s a more generic Captain Universe head, allowing for this figure to pass for a number of the Uni-Power’s other hosts.  So, if you so desire, this guy doesn’t have to be a Spider-Man variant at all, which is very nice of Hasbro.  The paintwork on this guy is generally pretty solid.  Some of the application could be a little cleaner, but I’m really digging both the metallic blue and the pearlescent white.  It looks really sharp.  In addition to the two extra head sculpts mentioned earlier, Cosmic Spidey is also packed with the outer wing of Vulture’s wing-pack, the mirror of the one included with Moon Knight.

THE ME HALF OF THE EQUATION

Obviously, when this series was shown off, I was a little distracted by the Moon Knight figure, so I didn’t really pay Cosmic Spider-Man much mind.  I actually passed this guy up a few times while I was out on the hunt for the rest of this series, since he wasn’t a priority of mine.  But, after several unsuccessful runs, he was the only figure left at one of the Targets I checked, and I was desperate not to leave totally empty-handed.  I also had a gift card, so that helped.  He’s not a bad figure at all.  Cool concept, cool design, cool execution.  It all adds up to a pretty fun figure.

#1405: Moon Knight

Posted by Ethan Wilson in Reviews and tagged with , , ,

MOON KNIGHT

MARVEL LEGENDS (HASBRO)

“A vision in an Egyptian temple leads Marc Spector to don a silver shroud and become the crime-fighting hero, Moon Knight.”

MOOOOOOOOOOOOOOOOOOOOON KNIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIGHT!!!!!

*ahem*

So, uh, it’s Moon Knight, essentially, is what I’m, uh, what I’m getting at.  Check it out. Yeah.  Right about now.  It’s, uh, it’s Moon Knight.  Comin’ attcha.  Yeah.

Let me tell you, I really like me some Moon Knight.  Well, I really like me some Moon Knight when he’s handled by a competent writer.  Or at least one that doesn’t equate a split personality to being able to write him as literally possessing the personalities of Spider-Man, Wolverine, and Captain America all at once (gee, thanks Bendis).  Current scribe Jeff Lemire is producing one of my favorite runs with the character, and my enjoyment of him is at an all-time high.  Perfect time to release some action figures.  Fortunately for me, Hasbro totally agrees, and has offered Moon Knight in both scales of Marvel Legends.  I already looked at the smaller figure three months ago, and today I’ll finally be following that up with a look at the main event, the new 6-inch scale Moon Knight!  Let’s see how this guy turned out!

THE FIGURE ITSELF

Moon Knight—sorry, “Marvel’s Moon Knight”—is part of Hasbro’s latest Spider-Man-centered series of Marvel Legends, released to coincide with the release of Spider-Man: Homecoming.  No, Moon Knight wasn’t in Homecoming (believe me, I would have made that fact known to everyone I came into contact with), but he’s loosely Spider-Man related, I guess.  I mean, there was that time that Spider-Man was one of his split-personalities (again: thanks, Bendis).  That’s sorta related; demented and sad, but related.  This isn’t Moon Knight’s first time as a 6-inch Legends figure, but it is his first since Series 15 of Toy Biz’s run (a whole 11 years ago). This figure stands just under 6 1/2 inches tall and he has 32 points of articulation.  Like the smaller Legends Moon Knight from earlier this year, this Moon Knight is sporting his most recent costume.  I know some fans were hoping for a classic all white Moon Knight, and while that certainly would have been cool, I still really dig this design. When this figure’s prototype was first shown off, there was a lot of discussion about which of the base bodies he was built on.  In hand, he’s an almost entirely new figure.  And oh boy, does that make for a really sharp looking figure, since it’s allowed for most of the body to be specifically tailored to Marc.  Though the body’s new to Moon Knight, it looks to have been built with re-use in mind.  All of the armored pieces are add-ons, but rather than the usual floating pieces and rubber overlays that we tend to see on lines that rely more heavily on bucks, Moon Knight’s add-ons are all hard plastic pieces affixed to the body with pegs and glue.  The end result looks very clean, and I can definitely see this making for more unique looking figures down the line.  The basic build of the body looks to be somewhere between the 2099 and  Spider-UK bodies, kind of taking up the slot that has typically been held by the faithful Bucky Cap body. The only re-used piece is his head, which hails from the Hulkbuster Series’ Blizzard figure.  It’s just a basic masked head, so it’s pretty sensible, and it’s even been given the all-new hood piece, so even placing the two figures side by side, they won’t look identical.  Speaking of that hood, another selling point of this guy is his separate hood and cape, allowing for better posing options.  His all-new cape works well with the head, and is definitely one of the better cape sculpts we’ve gotten from Hasbro.  Great dynamic flow, but not so crazy as to limit his posing options or get too heavy.  Moon Knight’s paint work looks fairly simple on the outside, but it’s actually really well-rendered when you really look at it.  All of the armored bits are done in a pearlescent white, as opposed to the flat white of the cape and hood.  Also, thanks to the separate pieces used for the armor, most of the pieces are molded in the proper colors, keeping things once and clean.  As an added bonus, the few sections that do require paint apps remember the essential rule of dark over light.  I cannot adequately express how happy that makes me.  Remember how disappointed that the smaller Moon Knight included no extras?  This guy makes up for that in spades.  He’s packed with two sets of hands (fists and gripping), one large moonerang, three smaller moonerangs, and Daredevil’s billy club standing in for his usual staff.  Perhaps my favorite part of all these extras is that the fists have slots between the fingers, allowing for the smaller moonerangs to be placed in-between on one hand or the other.  It makes for a pretty awesome look.  Moon Knight also includes the front of Vulture’s right wing, for those that care about such things.  Oh wait, that’s me!  Nice!

THE ME HALF OF THE EQUATION

Remember how illusive the Warlock Series Cyclops was?  He’s got nothing on Moon Knight.  I’ve been looking for this guy since May.  After three months of searching retail with no luck, I finally gave up and started looking online.  I was fortunate enough to be looking just as Amazon put up a small allotment of him for retail.  Sold.  I’m so happy to finally have this figure, and he’s gonna be giving that 90s Cyclops figure a run for that “favorite Legends to date” spot.  It’s clear that someone at Hasbro’s a very big Moon Knight fan, and its translated into one of the best comic-based Legends that Hasbro’s ever produced.

The Blaster In Question #0021: Hammershot

Posted by Tim Marron in Nerf Reviews and tagged with , , ,

HAMMERSHOT

ZOMBIE STRIKE

Zombies: everyone’s favorite guilt-free shooting target.  In just about every iteration of modern zombie fiction, it seems like it’s only a matter of time before everyone has a gun and is lighting up the undead left and right.  The fine people over at Hasbro certainly took notice of this trend when they started the Zombie Strike series of blasters back in 2013, a product line that persists to this day, which is a feat in and of itself.  So what laid the groundwork for such a line?  That’s what we’ll be looking at today with the Hammershot.

THE BLASTER ITSELF

The Hammershot was one of the very first Zombie Strike blasters, released in 2013 alongside the Sledgefire.  The Hammershot is a 5-round revolver style blaster, which, itself is nothing new.  What sets the Hammershot apart from other blasters like the Spectre REV-5 or even the Strongarm is its priming mechanism.  Instead of a traditional priming slide which would require a second hand to operate, the Hammershot uses, unsurprisingly, a hammer style of prime that can be operated entirely one-handed.  If you read my previous review, you’ll know that the premise of effective dual-wieldable blasters is quite alluring to me, so it should come as no surprise that I own a couple of these, thanks in part to my boy Ethan.  The outer shell of the blaster is entirely original work and has a lot of really nice layering of plastic which gives it some visual depth.  This is also helped by the use of this super cool, very subtle swirly metallic orange plastic which I believe is completely unique to this blaster.  There’s some interesting texture work going on too with the faux wood grain and faux cloth wrap on the handle.  I was skeptical of the cloth wrap at first because I thought it looked goofy and sort of out of place, but ergonomically it works just fine with no harsh lines or edges.  The handle itself is rather long, extending well past the bottom of my hand, but the extra length does provide a nice amount of surface to grip while working the priming hammer with your thumb.  As something of a side note, the distribution of weight around the trigger as well as the larger grip make it very easy and entertaining to spin the blaster around your index finger like a gunslinger.  In doing so, I’ve managed to fling mine into the floor several times without so much as a scratch, which speaks to the build quality of the blaster.  This is probably largely due to the relative simplicity of the internal mechanisms and outer construction.  Unlike blasters such as the Spectre, the Hammershot has no barrel or stock attachment points though it does have a single attachment rail along the top of the blaster.  The blaster performs admirably with shots flying far and hitting with substantial force.  I would recommend it more for outdoor play and advise caution before using it to light up your younger siblings unannounced.  The Hammershot comes packaged with 5 Zombie Strike green Elite darts.

THE ME HALF OF THE EQUATION

When the Zombie Strike line was first announced, for me, the Hammershot took the back seat as far as my attention goes.  There had been more than a handful of revolver blasters over the years and the premise of the shotgun style Sledgefire overshadowed the Hammershot.  While it’s true the Sledgefire may be the more mechanically interesting of the two, it’s hard to deny the sheer utility of the Hammershot.

 

#1404: Luke Skywalker – Jedi Knight

Posted by Ethan Wilson in Reviews and tagged with , , , ,

LUKE SKYWALKER – JEDI KNIGHT

STAR WARS: POWER OF THE FORCE II (KENNER)

“Under the tutelage of Obi-Wan and Yoda, Luke Skywalker learned the ways of the Force and became a Jedi Knight.Using his newly-developed powers, Luke successfully led a campaign to rescue Han Solo from the clutches of Jabba the Hutt. After Yoda confirmed what Luke feared most – that Darth Vader was his father – he decided to confront Vader, not to do battle, but to reach whatever good remained in the man once known as Anakin Skywalker. The diabolical Emperor Palpatine wanted Luke’s power under his tutelage, but the young Jedi was strong and resisted the potent allure of the dark side – though it nearly cost him his life. When the Emperor rose to annihilate Luke Skywalker, Vader hurled Palpatine to his death, sacrificing himself for his son.”

Wow, spoilers much?  Not only do we know that Darth Vader’s Luke’s dad, but also that he kills Palpatine *and* sacrifices himself?  This is a lot to process, you guys.  Or it would be if I hadn’t seen the movies, I guess.  But then, what are the odds of me buying an action figure of Luke Skywalker?  I’d say slim.  But I have and I did, so now onto the review!

THE FIGURE ITSELF

Jedi Knight Luke was released during the second year of Kenner’s Power of the Force II line.  He was the fourth version of the character in the line, and the second that year.  He’s based on his Return of the Jedi appearance.  He’s sort of an amalgamation  of the looks from that movie; for the most part, he’s from Luke’s introductory scene, hence the vest and the cloak.  However, he’s also got the glove covering his damaged right hand, which he starts wearing after the scenes on Tattooine.  He’s a horrible monster mash!  Who could ever love him!?!  Nah, it’s not really that big a deal.  Anyway, the figure stands about 3 3/4 inches tall and he has 6 points of articulation.  His sculpt is actually pretty tame for this line.  Sure, he’s still got the same head sculpt that never looked much like Hamill, and sure he still looks like his pecs are about to burst out of his shirt, but all things considered, he’s really not bad.  The proportions aren’t terrible, and he’s just in a fairly basic standing pose.  The paint work on this guy is largely very basic.  Mostly, it’s just black plastic, with a little bit of paint for the hand and some work on the face.  There’s a tiny bit of glossier finish on the boots, which is a cool touch.  The earliest samples of this figure actually had a tan/grey color for the vest, which made it stand out more, but this was eventually replaced with what’s seen on the figure in this review.  The second figure is a little blander, but is also the more accurate look, so that’s fair.  This figure was packed with his trusty green lightsaber, as well as a rubber cloak piece.  Both pieces are fairly decent for the time, but do look slightly goofy by modern standards.

THE ME HALF OF THE EQUATION

Jedi Luke was the third version of Luke I got, after the Dagobah and Tattooine versions.  I recall making a special trip to the local Toys R Us with my mom and dad, sitting in the middle seat of their Ford Ranger pickup truck.  I also recall the figure’s distinctive smell wafting through the car on the ride home.  Not long after I acquired this figure, it served as the inspiration for my Jedi Luke Halloween costume, which has the notoriety of being one of my favorite Halloween costumes pretty much ever.  A lot of good memories are attached to this figure is kind of what I’m getting at here.

#1403: Silk Spectre & Ozymandias

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

SILK SPECTRE & OZYMANDIAS

WATCHMEN MINIMATES

“A second-generation crimefighter, LAURIE JUSPECZYK followed in her mother’s footsteps as SILK SPECTRE.  Although she was never close to with the super-intelligent hero OZYMANDIAS, their paths would cross again when someone begins a campaign to kill or discredit former vigilantes.”

You know it’s a bad pairing when even the bio on the back of the box describes the characters as “never close.”  The last two days of Watchmen Minimates perhaps haven’t been the strongest partnerships, but at least they all had one or two key scenes together.  Today?  We got the left overs.  Without further ado, Silk Spectre and Ozmandias!

THE FIGURES THEMSELVES

The prior two sets were made up of characters shared between the specialty four-pack and Toys R Us-exclusive assortment of Watchmen Minimates.  Silk Spectre and Ozymandias, on the other hand, are both exclusively available in two-pack form through TRU.  Why these two ended up as the exclusives is kind of hard to figure out; I personally would have swapped out Comedian and Laurie, but at the end of the day, it’s not a huge deal, I guess.

SILK SPECTRE

Laurie Jupiter (It was Juspeczyk in the comics, but the movie never explains Sally’s changed  surname or has Laurie correct Rorschach’s use of “Jupiter” when he meets her, so it sticks) is patterned loosely on Charlton Comics character Nightshade.  Really, though, the only similarities the two share are a partnership with Captain Atom/Dr. Manhattan.  Beyond that, they’re rather different.  For the purposes of the movie, Silk Spectre’s look was rather changed.  The basic spirit of the original look is still there, I guess, but it’s more generic catsuit now than it was originally.  Meh.  The figure is about 2 1/4 inches tall and she has the standard 14 points of articulation.  Her only add-on is her hair, which is borrowed from Marvel Minimates’ New Mutant Magik.  Given it’s a near perfect match for her hair in the movie, the re-use is certainly warranted.  The rest of the work is done by the paint.  It’s all pretty solid.  She’s probably got the best paint in the series, to be honest.  The colors are sharp and bold, and there’s very little slop.  She includes a clear display stand and…that’s it.  Seems a little light, but I don’t really know what you could give her.  Maybe a more interesting character?  Oh wait, they did!

OZYMANDIAS

Jokes at Laurie’s expense aside, I can’t say Ozymandias is really a favorite of mine either.  He does at least get to be the villain (spoilers?).  He was originally meant to be Peter Cannon…Thunderbolt (yes, the ellipsis is part of his name) who never amounted to much on his own.  Ozy’s design in the film looks rather different at first glance, but the only truly major change was making the main bodysuit dark grey instead of gold.  It’s still the most easily distinguished of the designs, though.  Like Laurie, he’s built on the standard ‘mate body.  He gets add-ons for his hair, cape, and belt.  The hair and cape are new pieces.  They’re a little soft on the details, but look decent enough overall.  In terms of paint, Ozy’s okay.  Nothing truly amazing.  The pale, non-metallic gold isn’t the best look, but the application’s fairly solid.  The standard head sports his mask (seen only in flashbacks), but there’s also an extra head without the mask.  That’s more than the DC Direct figure gave us!  He also includes the usual clear display stand.  Fun times.

THE ME HALF OF THE EQUATION

Well, those reviews kind of went out with a whimper, didn’t they?  Sorry guys, I’m not trying to be a downer on this set at all.  Neither ‘mate is bad or anything, but neither one is as strong as the other four.  I really feel like splitting up this pair would do a lot to help both of them.  With that said, once you’ve got the whole set together, it makes for a pretty sweet display.  I’ve been waiting a long time for Watchmen Minimates, and while maybe I would have preferred comics-based ones, these are definitely a great set of ‘mates to have.  Now, to hold out hope for a second series with some Minute Men!

#1402: Rorschach & Dr. Manhattan

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

RORSCHACH & DR. MANHATTAN

WATCHMEN MINIMATES

“ERNIE KOVACS has a troubled mind, and will go to great lengths to protect the innocent as RORSCHACH.  When someone kills an old colleague, his investigation into the death brings mysteries to light and puts him back in touch with the world’s only known super-powered human – DR. MANHATTAN.”

On the plus side, this bio does at least do a better job of working in both characters than yesterday’s set did.  Unfortunately, Rorschach’s name is WALTER Kovacs.  Ernie Kovacs would be this guy.  And, while it’s still up for debate as to whether or not Ernie had a troubled mind, he most definitely wasn’t going around as a costumed vigilante…I think…

Right, the actual review.  I should get to that!  Here’s some more Watchmen Minimates!  As noted by the bio, it’s Rorschach and Dr. Manhattan.  Alright!

THE FIGURES THEMSELVES

Like yesterday’s set, Rorschach and Dr. Manhattan are one of the “shared” pairs of Watchmen Minimates, available in both the specialty four pack and as a two pack in the Toys R Us’s assortment. Mine are the two-pack version, but they’re functionally the same.

RORSCHACH

Rorschach is the closest the story gets to a main character, and is probably the most popular character contained there-in.  He was originally intended to be The Question, and is honestly the least changed character in that respect.  Rorschach’s design in the movie was completely unchanged from the comics, resulting in a ‘mate that can easily work for either version of the character.  The figure stands about 2 1/2 inches tall and has the usual 14 points of articulation.  He’s built on the basic body, with add-ons for his hat and coat.  Both pieces are new to this figure, and they work pretty well.  The coat’s a little on the bulky side, but it’s decent enough, and the hat’s one of the better takes on a fedora in this style.  Rorschach’s paint is about on par with the pair I looked at yesterday.  It’s pretty decent overall, but there’s some slight sloppiness on some of the base paint.  The detail lines are also minimal on this guy, so it’s a bit less of what DST’s good at, but what’s there is pretty solid.  Rorschach is packed with his grappling hook (a standard Rorschach accessory), as well as an unmasked head and hair, and a clear display stand.  The extra head is definitely cool, and my favorite extra.  The grapple is okay, but I can’t say I get why every Rorschach has it; I find it to be a rather minor piece.  I would have much rather had the aerosol can he uses to escape the cops, or his journal.  Also, the lack of extra heads with differing expressions is a little annoying.  Still, not a bad selection.

DR. MANHATTAN

Dr. Manhattan is the story’s one true super human, originally planned to be Captain Atom.  Visually, Manhattan is one of the story’s most memorable characters, and as such, his design remained essentially the same when they adapted the comic to film.  Structurally, Manhattan is just a plain Minimate, with additional parts or anything.  It’s certainly well suited to the character.  It does mean that all of the heavy lifting is handled by his paint work.  He’s done in a semi-transparent blue plastic, which, fun fact, is also glow-in-the-dark.  It’s surprisingly powerful, provided you give it a little time to charge up.  The detail paint on this guy is phenomenal.  All of his parts have detailed musculature, and his face is a spot-on recreation of how he looks in the film.  It should also be noted that this is the first Dr. Manhattan figure to forego the usual black shorts seen on all the merchandise.  I mean, they still Ken-Doll-ed him; he’s still got to be decent and all, since he’s being sold at retail.  Should you want him to be more modest, though, he does include an extra pelvis piece, molded in dark blue, thus replicating the shorts.  In addition, he’s also got the standard display stand, as well as a flight stand.

THE ME HALF OF THE EQUATION

Like yesterday’s set, I picked this pair up from Toys R Us on my birthday.  This pack is more comic-compatible than the last one, which is pretty cool.  Manhattan’s just plain awesome, especially for being a ‘mate that could have been super simple and boring.  Rorschach’s overall pretty decent, though I’m not sure he translated quite as well to the style.  Still, not a bad set, especially if you’re a fan of the source material.

#1401: The Comedian & Nite Owl

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

THE COMEDIAN & NITE OWL

WATCHMEN MINIMATES

“Secretly the vigilante known as THE COMEDIAN, EDWARD BLAKE continued to work for the government after his crimefighting career, performing various classified and unpleasant tasks.  When the highly dangerous killer is himself killed, his old colleagues NITE OWL and RORSCHACH are driven to investigate.”

Sometimes, I like to remember back when I didn’t totally hate everything Zack Snyder touched.  His adaptation of Watchmen was just as divisive as anything else he’s done, but I was actually on his side of that one.  Anyway, a whole eight years after its release, the film’s gotten a set of Minimates.  I’m taking a look at the first pair, The Comedian and Nite Owl, today!

THE FIGURES THEMSELVES

The Comedian and Nite Owl are one of the “shared” pairs of figures for Watchmen Minimates.  They were available both in the specialty four pack and as a two pack in the Toys R Us-exclusive assortment.  Obviously, mine are the TRU versions, but there aren’t any real differences between the actual figures.

THE COMEDIAN

Though he may be dead at the story’s start, the Comedian is perhaps Watchmen‘s most central figure.  He was originally supposed be the Charlton Comics character “Peace Maker,” before DC forced the change.  Shame, since it would have been perhaps the only noteworthy thing ever attached to the character.  Oh well.  Comedian’s look was largely unchanged when going from book to movie, so this guy will work pretty well as either version of the character.  The figure stands roughly 2 1/4 inches tall and has the standard 14 points of articulation. In addition to the standard base body, Comedian has add-ons for his hair, shoulder pads/suspenders/belt, and the holsters.  The holsters are the same basic pieces that have been in service since the Avengers Black Widow ‘mate, but the other two pieces are new to this figure.  The new pieces are generally pretty solid additions.  They could possibly have been a little sharper in terms of detail, but the work here is still pretty great.  In terms of paint, Comedian is pretty decent overall.  The best work is on the detail lines.  The face capture’s not only Jeffery Dean Morgan’s likeness, but also his cocky Comedian personality, which is pretty cool.  This is obviously a slightly older Comedian, though he does seem to be using any hint of his facial scar.  I guess it was pretty downplayed in the movie.  The base paintwork is a little sloppier than the line work, but still fairly decent.  The biggest issue with the paint is actually something that was beyond DST’s control.  He lacks Comedian’s signature smiley face button, due to rights issues associated with that particular image.  DST has opted to drop the button entirely, rather than giving us just the blank yellow circle that other companies have gone with.  I think I might like it better when it’s just not there; less distracting.  Comedian is packed with a pair of silver handguns and a clear display stand.  It’s a shame he didn’t get a few more weapons, and possibly an extra head and hair piece for a younger look, but what’s included is fair.

NITE OWL

Nite Owl is my favorite character out of the main Crimebusters in Watchmen (though, it’s actually his predecessor Hollis Mason that is my overall favorite character in the story), and it’s actually Patrick Wilson’s portrayal of him in the movie that helped me form that opinion.  I find his book counterpart to be a little bland, but Wilson added a nice sort of lost everyman aspect to him that was endearing.  Nite Owl was originally intended to be the Ted Kord version of Blue Beetle, another favorite character of mine.  The movie design for Nite Owl was one of the more drastic changes, largely due to the simplicity of the original design; that sort of thing doesn’t tend to work so well on a large screen.  Like Comedian, Nite Owl is built on the standard ‘mate body, with add-ons for his mask and cape.  Both pieces are new to this figure, and are likely to stay unique to him, since I can’t really see them being of much use for any other characters.  They’re both pretty decent pieces, though, like with Comedian, I think the details could stand to be a little sharper.  The paint work on Nite Owl is pretty great.  The work is all pretty sharp, and unlike Comedian, he’s not missing any essential details.  The mask is removable, and reveals a fully detailed Dan Drieber head, glasses and all.  I can’t say it’s a fantastic likeness of Patrick Wilson, but it doesn’t look unlike him.  I guess he’s just got one of those faces that doesn’t translate well to the style.  In addition to the usual display stand, Dan includes a spare hair piece for unmasked display.  I think the piece is a little too suave for Dan, to be honest, especially if this is meant to be a “present” day Dan; it should be a little longer and more comb-over-y.  It’s not awful, though.  I do wish he included an extra mask with the goggles up, since he has that look several times during the movie.

THE FIGURES THEMSELVES

The Watchmen Minimates snuck up on me.  At the time of the movie’s release, I was all over the idea of Watchmen ‘mates (in fact, I even made a custom set for myself, albeit a comic based one), but by the time they actually happened, I had largely moved past Watchmen.  When the boxed set hit, I wasn’t sure about getting the ‘mates at all.  But, I was out on my birthday, and I stopped at Toys R Us, and they had a full set, so I went for it.  Getting the ‘mates even got me to sit down and watch the movie again for the first time in several years, and I enjoyed that quite a bit.  This is my favorite pair of the ‘mates, and while there are certainly improvement that could be made, I’m very happy with them both.

#1400: Sarah Connor

Posted by Ethan Wilson in Reviews and tagged with , , ,

SARAH CONNOR

TERMINATOR 2: JUDGEMENT DAY (HOT TOYS)

Oooeeee, look at that.  1400 reviews.  Another hundred down.  Seeming like less of a milestone these days, but I’m noting it nonetheless.  I’m noting it the usual way, with a deluxe review of one of my higher-end figures.  Today, I turn back to the film that kicked off the milestone reviews, Terminator 2.  So far, I’ve looked at both the terminator and the protector from the film, but I haven’t yet looked at one of the franchise’s central characters, Sarah Connor.  So, uhh, come with me if you want to…read this review?  …Doesn’t have the same ring, does it?

THE FIGURE ITSELF

Sarah was released as figure 119 in Hot Toys’ Movie Masterpiece Series, placing her between Inglorious Basterds’ Aldo Raine and Iron Man 2’s War Machine numerically.  Not as themed as other releases, but the T2 figures were all pretty scattered.  This figure is based on Sarah’s “terminator” look from around the film’s mid-point, when she goes to kill Miles Dyson.  It’s really her most distinct look, and definitely my favorite.  Sarah stands roughly 11 inches tall and she’s got 28 points of articulation.

Let’s start things off by looking at Sarah’s head sculpt.  While heads are usually one of HT’s stronger suits, this one’s not one of their best offerings.  The prototype actually looked pretty good, but it seems something was lost in the manufacturing process.  It’s far from a terrible sculpt, of course.  The resemblance to Linda Hamilton is passing; it’s not spot-on, but it’s decent enough that you can tell who it is.  I think it’s the hair that’s throwing it off.  While I’m definitely a fan of the hair being sculpted, rather than rooted, and the overall shaping and detailing is pretty solid.  The biggest issue is with the bangs, which are just a little too short; they really should be getting closer to her eyes, and I think that throws off the likeness.  The bangs actually swap out, and there’s another pair that’s parted and closer to the head.  It doesn’t really improve the likeness, but it does allow for the addition of the included hat.  The paintwork on the head is generally up to the usual HT quality.  The only real flaw is the color of the hair, which is a touch too dark for Hamilton.  It’s not that far off, though, so it’s pretty minor, all things considered.

Sarah’s costume is made up of four main pieces.  She’s got a shirt, pants, a tactical vest, and a belt.  All of the pieces are very well tailored to the figure.  The vest in particular is really cool.  All of the pockets open and the the clasps all work like they’re supposed to.  There’s also a pair of sculpted boots, which are very nicely sculpted, and well scaled to the figure.  She’s also got a watch and a wristband, which are mostly there to hide the wrist joints on the arms.  They do that job well, and add some extra character to the figure as well.

The underlying body is largely unique to Sarah.  The arms in particular are unique; they’re armatures with a rubber coating over them.  They actually look quite a bit like Hamilton’s arms from the film, and she’s even got her scar on the left shoulder.  The rest of the body is decent, but could be a little more tailored to the figure.  The shoulder’s are definitely too narrow, and the neck is a little thin, which makes the head look really large comparatively.  Once again, nothing too terrible, but it’s definitely a little off.

Sarah’s accessories are definitely this figure’s strongest suit.  She includes:

  • 6 hands
  • Hat
  • Sunglasses
  • Shotgun
  • Assault Rifle
  • Handgun
  • Knife
  • Display stand

She’s got the basic relaxed hands, as well as a right trigger finger hand, a left gripping hand, a a right cigarette holding hand (with removable cigarette!), and a right hand for holding her knife.  They’re all very nicely sculpted and quite realistic looking.  They’re a little hard to swap the first time, but once you swap them a few times, they go alright.

The hat works in conjunction with the alternate bangs piece.  It’s cloth, and a little oversized, but it’s generally a pretty nice piece.  Just, whatever you do, don’t leave it on for long periods of time.  It’ll stain her forehead!

The sunglasses are very definitely my favorite piece.  They’re just amazingly detailed, perfectly scaled, and sit amazingly well on the figure’s face.  I wish I looked this good in sunglasses.

The shotgun, assault rifle, and handgun are close runners up to the glasses.  They all have a number of moving pieces and all of the details that you’d see on the full scale weapons.  The shotgun has a folding stock, as well as five removable rounds.  The assault rifle includes a removable scope, rail, and silencer, allowing for a few different looks.  The handgun has a removable clip, and the clip even has a removable bullet at the very top, which seems like it’s asking to be lost.

The knife is a key piece to the film, so it’s great that it was included here.  Like the other weapons, it’s very well scaled and detailed.  It includes a sheath, which feels a little cheap and quick by comparison, but it’s nice to have the option of putting the knife away, I guess.

Lastly, there’s the display stand.  It’s the same basic oval stand we’ve seen a number of times before.  It gets the job done, and it looks pretty decent, so that’s good.

THE ME HALF OF THE EQUATION

Sarah is a very early Hot Toys figure for me.  I believe she was my third.  She’s also got the notoriety of being the very first Hot Toys figure I bought for myself.  I ordered her off of Amazon, in anticipation of getting the T-1000 figure later that year.  She’s not a perfect figure, and is definitely the weakest of my three T2 figures, but she’s still a pretty darn fun figure in her own right, and she completes one of my favorite sets of HT figures.

#1399: Daredevil

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

DAREDEVIL

MARVEL LEGENDS (HASBRO)

“Blinded as a young boy and imbued with extraordinary senses, Matt Murdock fights injustice by day as a lawyer and by night as the Super Hero ‘Daredevil’”

This past Friday saw the release of The Defenders, Marvel’s big team-up series formed out of their four Netflix TV series.  It’s an event several years in the making, so it’s pretty cool to see it finally hit.  No doubt in an effort to tie-in with the show’s release, Hasbro has just put out their first series of Marvel Legends based around the four shows.  Earlier today, Super Awesome Girlfriend took a look at Punisher from that line, and I’ll be having a look at my personal favorite of the Defenders, Daredevil!

THE FIGURE ITSELF

Daredevil is figure 1 in the “Man-Thing Series” of Marvel Legends. The series takes its cues from the “Marvel Knights” banner which has served as the basis of the shows so far.  The set’s made up of four show-based figures and two comic-based, with a comic-based Build-A-Figure.  Obviously, DD is one of the four show-based.  The figure stands a little over 6 1/2 inches tall and he has 32 points of articulation.  He’s got an all-new sculpt, based on Matt’s costume from the end of Daredevil Season 1/very beginning of Season 2 (the mask is the giveaway; it’s the original, more angular design).  The sculpt is 100% new to this figure, though I wouldn’t be shocked to see a lot of it turn up again in some capacity, should Hasbro decide to do a Season 2 version.  The sculpt is, surprisingly, a little bit of a mixed bag for me.  Given Hasbro’s recent track record, I was expecting them to knock this one out of the park, but they haven’t quite managed that.  As a whole, I’m happy with the work that’s been done.  The surface details are all great. The detail work on the costume is awesome; the texturing is top notch, and the details look to have been lifted right from the on-screen costume.  It’s the proportions of the figure that throw things off.  My biggest issue is with the shoulders, which just seem too far set out from the rest of the body, giving him this odd sort of tortilla chip thing.  They just always seem to be sitting slightly the wrong way.  The torso’s also a little flat, but my other main issue is with the head.  As with the rest of the body, the surface details are great, and he even has a decent resemblance to Charlie Cox…if Charlie Cox were a bit wider than he is in real life.  Not heftier, or fatter; just wider.  It honestly looks like the head got slightly squished.  Which is a shame, because if it were just a little slimmer, it’d be a spot-on sculpt.  As far as the paint work goes, DD is pretty decent overall.  The Netflix figures have the same printed faces seen with Ragnarok Loki.  For Matt, this is really just limited to the lower half of his face.  The printing on mine is actually slightly skewed to the left of his face, which makes him look just a tiny bit off.  It’s not terrible, but I did notice it upon close examination.  On a figure with more proper placement, I’m sure the details look great, though.  The rest of the figure is the traditional paint methods, which are fairly cleanly applied.  They did miss applying the black details to the front of his mask, around his eyes.  It’s not super awful looking (since the design of the cowl means that part of the mask catches shade naturally), but it does make me wonder if they were maybe working from the Season 2 design for the colors?  [EDIT: after looking through some images of the costume, it looks like the front of the mask was left unshaded in Season 1, and the black was added at the start of Season 2, making this figure definitively a Season 1 DD]  Matt is packed with his signature billy clubs (which are finally a new mold; thank you show accuracy!), as well as a pair of fists, and the head of the BAF Man-Thing.  I’m a little surprised by the lack of an extra head, either unmasked or Season 2, but I guess that might have been a bit much for a figure that was 100% new sculpt.

THE ME HALF OF THE EQUATION

I’ve been anxiously waiting for this figure pretty much since I finished Daredevil Season 1 back in 2015.  When he was finally announced, I was ecstatic.  While still on the look out for the freaking Homecoming Series (which I finally finished finding just yesterday), I ended up finding this guy and Punisher at Power Comics in Myrtle Beach.  He’s not perfect.  I was a little bummed about that, truth be told.  But, over the course of writing this review, I messed around with him some more, and I’m content with him.  Of course, now I’m tempted by the DST version coming later this year, to see if that one’s better…

Guest Review #0042: The Punisher

Posted by hodgeppodge42 in Guest Reviews and tagged with , , , , , ,

THE PUNISHER

MARVEL LEGENDS

Heyo! It’s been a while, hasn’t it? Last time, I was trying to review Mass Effect minimates (which I still need to finish, oops…) but I’m going to completely switch gears this time. Today, I’m going to introduce you guys to my gun-toting cinnamon roll Frankie (aka The Punisher)! Warning, throughout this review I will mostly call him Frankie, I know unprofessional –sue me .

THE FIGURE ITSELF

This figure is specifically designed after the character portrayed in the second season of Daredevil on Netflix. He comes in the same series of Hasbro’s Marvel Legends as Daredevil, Jessica Jones, and the build-a-figure Man Thing (who came up with that name???).

Frankie, here, stands at about 6 ½ inches tall with 30 points of articulation. According to Ethan, Frankie’s body is not reused from another figure; in fact, he is completely his own with all new pieces. What’s cool about this figure, and a lot of the newer Marvel Legends, is that some of his features are printed on. In this case, Frankie’s face and the skull on his chest have been printed, not painted, on. This allows for more precise detailing to be made on the figures, for Frankie it means that you can see a nice five-o-clock shadow going on there and a couple of small scars on his nose. I actually really like how Frankie’s face turned out, the detailing is fantastic and they were able to capture his serious, broody, and adorable face really well.  The detailing on his chest is pretty cool as well. You can see all the straps and buckles on his bullet-proof vest, they’re not painted on but are part of the chest’s sculpt. The print job on the vest is well done as well; it really does look like paint on a vest, and even includes implied rough texture of the vest’s material and a few drips of running paint. Frankie’s legs have a lot of subtle detail, with wrinkles, pockets, and rough texturing for the pants. I find his boots to be really interesting, while just normal plain combat boots, they were able to make it look like his pants were stuffed into his boots and not look like all one entity. His jacket appears to be removable, but suggest leaving it on because he would look weird without it, especially since his arms are sculpted to be wrinkly like coat sleeves. I also have to say a quick thing about his hands; if you look closely you can see the suggestions of veins and tendons, which is a neat little detailing. The paint on the figure is okay, it’s just black and skin tones. There are a few spots where his hair (mostly at the edge of his bangs is peach instead of black, and at the corners of his jaw his five-o-clock shadow doesn’t completely cover it.

For accessories, Frankie comes with two guns. The first is just your average pistol, painted silver with a textured handle and other small detailing related to that style of gun. The second is some kind of rifle…I’m not gonna lie, I don’t know guns and our gun guy isn’t here to tell me all the cool things about the larger of Frankie’s guns, including what the hell to call it. It’s a cool looking gun that I’m sure is supposed to fire rather rapidly, with a scope, a long, slightly curved magazine clip, and other gun do-hickeys. I’m sorry, I don’t know guns, you’ll have to forgive me or wait for this to be updated later with more (accurate) details on the gun. All I know is that Frankie’s larger gun is black and pretty badass looking.

THE ME HALF OF THE EQUATION

Frankie came to me while we were packing up our apartment to move elsewhere. I was having a pretty stressful time, and my super sweet boyfriend decided to get me this figure when he saw it to try to help me out some. I fell in love with my gun-toting cinnamon roll after watching his part in Daredevil season two. My (over) enthusiastic love for the Punisher surprised Ethan a lot, especially since I normally don’t care for morally gray characters, but Frankie was just different and stole my heart with his sad brooding and love for lots of bullets. So when Ethan saw that they were making this figure he showed me and I’m sure our neighbors could hear my fangirl-screaming three-floors up, and I wanted one ever since. I love this design of the Punisher and I’m so happy he’s a part of my growing collection of figures! I’m also super excited for his Netflix show, and you can bet your bum I’m gonna watch it with this figure in hand!