Tag Archives: 90s

#3803: Dewback & Sandtrooper

Posted by Ethan Wilson in Reviews and tagged with , , , ,

DEWBACK & SANDTROOPER

STAR WARS: POWER OF THE FORCE II (KENNER)

Okay, I had a bit of an impromptu break yesterday, because my head just wasn’t in the game and I didn’t have an easy to grab and review item on hand, but have no fear, I’m back at it today, and I’m going back to one of my old faithfuls: Power of the Force!  The line had all manner of price-points and such set-up to cover different things, and one of them was the “Creature” sets, which each paired a standard figure with a larger creature of some sort.  I’ve looked at three of the eight, and today I’m capping things off by arriving thoroughly at the middle, the the Dewback and the Sandtrooper!

THE FIGURES THEMSELVES

The Dewback and Sandtrooper were part of the initial round of “Creature” Sets for Power of the Force, hitting retail in 1997.  It was one of the three A New Hope-based Creature sets in the first batch, and one of four overall in this particular sub-line.

The Dewbacks are seen fairly early on in the franchise, and then really not again until The Mandalorian finally brought them back for an episode.  They were the source of a little extra focus from the Special Edition re-release of A New Hope, though, which was a large piece of the push on these initial creature sets.  The figure is about 8 inches long, and has 4 points of articulation, as well as a feature that opens and closes the figure’s mouth.  The sculpt here is entirely new, not re-used from the vintage version.  While the vehicles got re-used, the creatures were not the same situation.  This one is more patterned on the CGI-recreation from the updates, as was the case with Jabba.  That said, I think the Dewback works out a little bit better.  It’s not a bad sculpt; there’s certainly a flair to it, carrying on the general style of the earlier PotF figures.  The proportions are definitely a little over-hyped, but I do rather like the texture work.  The color work is pretty solid; the eyes are quite realistic, and the accenting of the brown on the top is pretty decent.  The Dewback has a lede that fits in its mouth and can be held (albeit somewhat awkwardly) by the included Sandtrooper.

There were three Sandtroopers available in Power of the Force.  This is the third one, at least as far as my reviews go.  The figure stands 3 3/4 inches tall and he has 7 points of articulation.  He swaps out the waist articulation of the other two for a pair of hinged knees, granting him an easier time sitting on the Dewback.  Beyond that, he feels very much like the other two, right down to the off-model helmet and the slightly odd proportions.  At least he’s consistent.  The paint work saw two variations.  This figure is the first of the two, which has much heavier dirt accenting, making him look rather orange.  It definitely goes overboard (especially since this guy’s part of the mounted division, and wouldn’t actually be walking around on the sand), but at least they tried something different.  He’s packed with his backpack and longrifle (which can be stowed on the backpack), as well as a prod, which is, like, three times as long as him.

THE ME HALF OF THE EQUATION

I didn’t have any of the creature sets as a kid, but I did have *just* the Sandtrooper from this set, because I got handed one by a dealer while walking through a comic show when I was a kid.  Don’t know quite what happened to that one, if I’m honest.  I ended up getting this one a few years back, when I was able to get a sealed copy for pretty cheap via a trade-in at All Time.  It’s an okay set.  The Dewback is obviously the star here, and the work really shows.  The trooper is pretty run of the mill, but he can at least bend his knees, so he’s got that going for him.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3800: Whirlwind

Posted by Ethan Wilson in Reviews and tagged with , , , ,

WHIRLWIND

IRON MAN (TOY BIZ)

“A mutant born with the power to spin at superhuman velocities, Whirlwind delights in using his special talents to terrorize others-first as the neighborhood bully, and now as a powerful costumed Super Villain! Volatile and brutal, Whirlwind doesn’t really care what target the evil Mandarin sends him to destroy-he’ll obliterate it in an instant with maniacal glee!”

We’re back with the Iron Man reviews today, specifically of the Toy Biz variety because that’s what I like to do. I’m keeping things rolling with the antagonists, I suppose. Today’s entry is Whirlwind! It’s worth noting that despite the show’s insistence on sticking purely to Iron Man villains, not filling in with more interesting villains, Whirlwind’s actually not really an Iron Man villain at all, and is instead an Ant-Man and Wasp villain, but I guess Iron Man just sort of takes what he wants. It does seem kind of cruel to steal from Ant-Man, but, you know, that’s just Tony. He’s a bit cruel. This was Whirlwind’s very first action figure, which was pretty cool for him, so let’s take a look at it!

THE FIGURE ITSELF

Whirlwind was released in the second series of Toy Biz’s Iron Man toy line. He’s based on his animated incarnation, which was in turn based on his classic costume, more specifically his second costume design after he added the chain mail and also added a shirt. Thank you for that, Whirlwind. The figure stands about 5 inches tall and he has 9 points of articulation. The articulation on this one is kind of interesting because it’s a sort of a mix of unique and kind of basic. He loses the knee joints, which had become fairly standard of this point, but has disc and peg shoulders. The shoulders are rather loose in order to facilitate his action feature. He also has a waist swivel, but again it’s restricted to facilitate his action feature and isn’t really much for posing. His sculpt is pretty much on par with what we expected from the line. He is a little on the bulky side, but also not bad for Whirlwind. The chainmail detailing is actually pretty good. The hands and feet seemed rather large, and conversely the helmet feels a little small, like it might be difficult to fit an actual head underneath. The face plate is also definitely giving like more ironron Man vibes than Whirlwind usually did, but it’s not bad. Whirlwind’s paintwork is pretty decent, and pretty basic. It’s really just the silver applications. His hands are a little bit more prone to chipping, which is a little bit of a bummer, but not the end of the world. Whirlwind is packed with two removable wrist sawblades, which are super easy to lose, but also super cool. as well as an ID card like the other non-armored characters in the series. Whirlwind has a spinning feature; turning his waist a number of times and then pressing the button on his back to release it will cause his upper half to spin. It works okay, but it does cause some issues with posability.

THE ME HALF OF THE EQUATION

I actually got Whirlwind back close to the original run. I’ve brought up Ageless Heroes a few times on the site. It was a comic store, not too far from where I grew up, that went out of business in ’99/’000. They had a lot of Toy Biz Marvel figures and had they put them on pretty deep discount. So, I picked up a lot of them at the time. This one in particular was sort of consolation prize. The Avengers: United They Stand figures have just been released and were very hard to find at first. After a failed trip trying to find them, my dad took me to Ageless Heroes where I picked out this guy. He’s not perfect, but he’s pretty cool and I do really like him. And, it’s not like there’s a plethora of Whirlwind figures out there.

#3799: Tatooine Skiff (with Luke Skywalker)

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

TATOOINE SKIFF (with LUKE SKYWALKER)

STAR WARS: POWER OF THE FORCE II (HASBRO)

“Over the arid Western Dune Sea on Tatooine, Jabba the Hutt sentences his victims to be cast into the maw of the mighty Sarlacc, much to the raucous amusement of his palace minions. In the final attempt to escape from the clutches of the vile crime lord, the Rebel heroes launch a surprise attack. And so…the daring confrontation aboard the Tatooine skiff ignites!”

While I’m very much all-in on the figures for Power of the Force II, I don’t much review the vehicles.  This is partially because I don’t go out of my way to buy the vehicles (they take up a *lot* more space than the figures), and partially because I don’t usually enjoy reviewing the vehicles.  But, I do occasionally jump in with a vehicle, especially the ones on the smaller side, and especially if they had a unique figure.  So, here’s a vehicle that’s on the smaller side that had a unique figure!

THE ITEM ITSELF

The Tatooine Skiff was added to the Star War: Power of the Force line in 1999, at that point officially under the Hasbro brand, following Kenner officially being dissolved.  The set was released exclusively at Target, and paired off the skiff seen in the Sarlacc sequence of Return of the Jedi with a Luke Skywalker variant not available elsewhere.  The Skiff measures about 12 inches long.  It doesn’t really have “articulation,” but it has a number of moving parts and features.  There’s landing gear, which is useful for keeping it not falling over, which you can release using the lever at the top.  The rails on the sides breakaway to simulate damage, and there’s also a button to launch one of the floor panels upward, sending a figure flying.  And that’s all without getting into the plank that Luke is made to walk, which has it’s own flip-down feature, should you choose to murder your Luke Skywalker in such a way.  It’s a lot of features, honestly, and a reminder that this mold wasn’t actually developed by Hasbro (whose vehicles tended to be a bit more collector oriented as we went along), but was in fact a re-use of the vintage Kenner molds, like a lot of this line’s vehicles.  It’s not a bad sculpt at all.  It’s a good match for what we see on the screen, it’s well scaled to the figures, and the gimmicks and features don’t mess with the appearance too much.  There are certainly some parts that are a little flimsier, but it’s generally solid.  There were two colors available; green and tan.  Mine’s the tan one, but the differences were ultimately minor.  The paint work’s not bad; there’s plenty of simulated wear and dirt, which feel right for a thing that’s been out in the desert.

The included Luke is another take on Jedi Luke, which is unsurprising.  He was about 3 3/4 inches tall and he has 9 points of articulation.  It’s actually not a bad set-up for movement, since he gets proper knees, and a swivel at the waist and on the right wrist.  His parts consisted of a mix of old and new, with the head shared with all of the later-run Jedi Lukes, and the arms shared with the Complete Galaxy Luke.  The torso, pelvis, and legs were new, and the right had was tweaked to feature the damage to the back of it, which Luke gets during the skiff braw.  Not while he’s on *this* skiff, but still.  It’s a very scene specific Luke, but ultimately a pretty serviceable one.  His paint’s minor, but not bad.  Application’s mostly pretty clean, with only some minor slop on the change-over from his left hand to his sleeve.  He’s packed with his lightsaber, which seems like a solid choice.

THE ME HALF OF THE EQUATION

Not being much of vehicles guy, I really only had the basics for this line as a kid.  That didn’t include this one.  I got this, I want to say, sometime in late 2018/early 2019?  It came into All Time, and I was just starting my real push to go completist on the line.  I’d already gotten the skiff guard cinema scene set, so I felt like having the actual skiff might not be the silliest thing.  And it’s not.  It’s fun little piece, though it’s really more display than toy.  And, there’s a neat Luke Skywalker variant too!

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3795: Blizzard

Posted by Ethan Wilson in Reviews and tagged with , , , ,

BLIZZARD

IRON MAN (TOY BIZ)

“A once-brilliant scientist driven insane when he tested his portable cold generator on himself, the man now known as the Blizzard has become the twisted enemy of all that is decent. Possessing the ability to create untold amounts of ice and snow with a single thought, the Blizzard always has a chilly reception ready for those who would oppose him-particularly his arch-enemy, Iron Man!”

Okay, let’s jump back into the Iron Man villain well, I suppose!  Last week was Whiplash Blacklash, who’s always been sort of forgettable.  Today it’s Blizzard, who’s not as forgettable in general, but is minorly forgettable in the sense that most people don’t know there’s actually two of them.  The full face mask and generally similar designs don’t really help matters there.  Nor does the fact the cartoon the Iron Man line was based on identified Blizzard as one guy, while the toy identified him as another.  Hooray for confusion!

THE FIGURE ITSELF

Blizzard was released in Series 2 of Toy Biz’s Iron Man line, as one of the three “antagonist” figures.  He’s an adaptation of Blizzard’s animated design, which was a pretty good, solid “classic” Blizzard design.  The figure stands about 5 inches tall and he has 10 points of articulation.  His movement is pretty decent for the era, though it’s not revolutionary or anything.  The sculpt was new at the time (though it saw re-use later down the line for Dormammu of all characters), and it’s generally okay, apart from one odd quirk.  The general build and layout of the costume elements certainly works, but, for some reason, he kinda looks like he has two left feet?  Guess he’s not much of a dancer.  His paint work is limited to a bunch of white on blue plastic.  It honestly works pretty well, though, so it’s pretty striking.  Blizzard is packed with an ice glove attachment for his right hand, an ice cane, and an identification card.  Generally, it’s a nice selection of extras.  He also gets an action feature; much like a number of the earlier Wolverine figures, he has a little thumb-hold on his back, so you can move him at the waist, which will swing his arms up and down.

THE ME HALF OF THE EQUATION

I’ve always liked Blizzard pretty well, and I especially liked him in the cartoon.  I didn’t get this one new, but I got him *relatively* close to new.  I found him loose at a toy show, in the early ’00s.  He didn’t have any of his accessories, but he worked for my purposes at the time.  I just got the chance to complete him a few weeks ago, when a complete one came in through work.  Aside from the slightly odd foot sculpt, he’s a really nice, pretty basic figure.

#3794: Weequay Skiff Guard

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

WEEQUAY SKIFF GUARD

STAR WARS: POWER OF THE FORCE II (KENNER)

Oooooooooh, every party has a pooper, that’s why we invited Wequay!  …sorry, do we not all just spontaneously break into quotes from Robot Chicken?  Is it just me?  Yeah, actually, that tracks.  Well, in my effort to get through more of the many, many unreviewed Star Wars figures in my collection, we’re jumping into another one, specifically of the Power of the Force variety.  So, here’s the aforementioned party pooper, Weequay (Skiff Guard)!

THE FIGURE ITSELF

Weequay Skiff Guard was added to Kenner’s Star Wars: Power of the Force line-up in 1997.  He initially predated the Freeze Frames, but was one of the figures to be rereleased with one later.  However, Weequay is by far the rarest of the Freeze Frame releases, so it doesn’t really turn up much.  The figure stands about 3 3/4 inches tall and he has 6 points of articulation.  Weequay got an all-new sculpt, which is honestly a pretty good one.  He’s got a fair a bit of pre-posing going on, largely to aid in holding his force pike.  It’s actually pretty dynamic, but doesn’t make him any trickier to stand or anything.  The detailing’s pretty solid; the costume elements are pretty sharp, and the face manages to get that “idealized” version of the mask from the movie, so it’s accurate, but also a little less goofy.  Weequay’s color work is sort of subtle, in that it’s got a bit more going on than you might expect.  It’s a lot of brown, but there’s also some slight blue, and a fair bit of accent work.  The paint work’s all fairly clean, and the sculpted details stand out nicely.  Weequay is packed with his force pike, as well as a brown blaster, for, like, options, I guess?  He can’t actually really hold the blaster, what with the pre-posing for the pike, but you know, I guess there’s the extra?

THE ME HALF OF THE EQUATION

My most notable exposure to Weequay is in the Robot Chicken Star Wars Specials, where he serves as Boba Fett’s sidekick for a set of running skits (and where the sing-song-y bit from the intro originated).  Beyond that, I don’t know a ton about him, because, well, what’s to know?  I got this guy back in 2018, I think?  I used some Christmas money from my Grandmother to buy a bunch of PotF figures, because I was feeling a touch nostalgic.  He’s actually quite a nice figure, and my favorite of the whole skiff sub-set.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3790: Blacklash

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BLACKLASH

IRON MAN (TOY BIZ)

Alright, we’ll be back with the Toy Biz Marvel!  Look, it’s kind of my comfort zone right now, so I’m sticking with it.  I’m back with the Iron Man line, patterned on the cartoon from the ’90s.  The show’s first season built a classic cartoon roster of recurring villains out of Iron Man’s existing rogues gallery.  Admittedly, Iron Man’s villains aren’t the most notable for the most part, but they did their best.  Whiplash, who was at the time going by Blacklash, was part of the Mandarin’s squad of lackeys, and ultimately was never more than a minor player (though he was still a better adaptation than Iron Man 2).  He did at least get a figure out of it.

THE FIGURE ITSELF

Blacklash is part of Series 1 of Toy Biz’s Iron Man line, as part of the small batch of villains at launch.  He’s based on Blacklash’s design from the show, which is in turn based on his Justin Hammer-designed gear from the comics.  The figure stands just over 5 inches tall and he has 7 points of articulation.  His construction is on the simplistic side, and he’s notably missing any elbow articulation.  I guess maybe it’s to aid in the action feature?  It makes him quite stiff, as does the cape piece, which is large, heavy, and also doesn’t stay on so well.  The head’s actually pretty good, so good, in fact, that Toy Biz re-used it a bunch, minus the weird ponytail.  It’s definitely the best part of the figure.  His paint work is reasonably well done.  It’s a little sloppy, but certainly not the worst I’ve seen from this line.  Blacklash is packed with a whip and nunchucks, which work with his arm swinging feature.  He also gets the ID badge that all of the non-armored figures got.

THE ME HALF OF THE EQUATION

Blacklash was the last figures I got from the Series 1 line-up.  For whatever reason, I never got him back in the ’90s, and he just never showed up in front of me.  I had picked up a sealed one a while back, but he had weird paint issues, so I never ended up opening him.  One with far better paint got traded into All Time a couple of months ago, so I opted to do the swap out.  He’s not the most impressive figure.  He’s not the most impressive character, either.  But, he’s decent, and good with the rest of the line-up, so there it is.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3789: Greedo

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

GREEDO

STAR WARS: POWER OF THE FORCE (HASBRO)

Okay, here we are at the end of the week.  We made it, you guys!  Good for us!  As a reward to myself, you know what I gonna do?  I’m gonna review a Power of the Force figure.  You know, as a little treat.  Yeah, that’s the ticket.  Waaaaaaaaaay back, nearer the beginning of this site, I took a look at the first Greedo from Power of the Force (and pissed off one of my trolls along the way), but today, I’m setting my sights on the second Greedo, from the tail end of the line.

THE FIGURE ITSELF

Greedo was part of the 1999 run of Star Wars: Power of the Force, in the first of the two Commtech-sporting sets that ended the line.  By this point, the figures were officially branded as “Hasbro” products, as Kenner had been disbanded and absorbed.  This figure was designed to pair off with the Han Solo form the same line-up, both of them specifically being based on the cross-table conversation from the cantina.  The figure stands 3 3/4 inches tall and he has 8 points of articulation.  Like Han, he gets a better articulation set-up than earlier figures, with actual bending knee joints, which let him sit properly in the Cantina booth.  His sculpt was all-new, and was a far less stylized one than the prior version.  His proportions land closer to the actual film look, so he’s a lot skinnier, and his head is a bit bigger.  There’s also a bit more work into the texturing and such, and his vest is now a removable rubber piece.  Under the vest, there’s even a blaster mark on the chest, from where Han shoots him, which is particularly gruesome, but also kinda cool.  Greedo’s color work is rather on the basic side, but it does what it needs to, and is generally pretty solid.  There’s even some slight “scorching” where the blaster wound is sculpted, which is a neat touch.  Greedo is packed with a blaster pistol and the Commtech stand.

THE ME HALF OF THE EQUATION

I actually bought this figure several years ago, back during one of my initial pushes to round out my collection, but he’s sat unopened, hanging from a thumbtack on the wall in my upstairs hallway for most of that time, because I had the other Greedo actually out on display with the rest of the collection.  A couple of months ago, I picked up the cardboard Cantina set, and it’s got the little booth for him, so I finally opened him to put him there.  He’s actually quite a nice little figure.  The first one’s not *bad*, but this guy’s better, and holds up incredibly well for a figure that’s more than a quarter of a century old.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3785: Iron Man – Hydro Armor

Posted by Ethan Wilson in Reviews and tagged with , , ,

IRON MAN — HYDRO ARMOR

IRON MAN (TOY BIZ)

“When the power of Iron Man is not sufficient to meet the needs of a given situation, the genius of Tony Stark compensates – by creating specialty suits of armor to get the job done! Iron Man’s Hydro Armor is designed to withstand the enormous pressure of deep sea exploration, and is equipped with a battery of on-board weapons designed to function in the murky depths of the deepest parts of the ocean!”

Okay, I’m kicking the month off with another retro Marvel review!  It’s an Iron Man review, specifically from Toy Biz’s Iron Man.  I last looked at this line back in October, with Tony Stark, and now I’m taking a look at one of his many armored Iron Man variants from the show that spawned the line.  The Model 6 Hydro Armor was introduced in the comics in the late ’80s for use in deep sea operations, and it turned up a number of times on the show, which also netted it an action figure.

THE FIGURE ITSELF

Hydro Armor Iron Man was released in Series 1 of Toy Biz’s Iron Man line.  Given the focus on the armor in the show’s first season, it made sense.  The figure was subsequently re-packed in a two-pack with Mr. Fantastic from the FF line, and repacked a few times in the Marvel Universe line.  They were certainly fond of this one.  The figure stands a little over 5 inches tall and he has 7 points of articulation.  In terms of articulation and build, he’s very similar to the other armored figures from this line.  He uses the under-lying figure with clip-on armor set-up.  The under the armor look isn’t based on anything specific, but it’s a neat enough design.  His head is a re-use of the Modular armor head, which tracks with the show design. When fully assembled, the armor looks pretty good, and fairly accurate to the design.  The arm pieces have a little trouble staying put, but that was sort of a recurrent issue with the line.  The head dome piece is cool, even if the entire concept of the dome piece is slightly weird.  The color work on this guy is alright, but suffers from an odd clash between the yellow parts and the chromed gold armored bits.  It doesn’t work as well with gold as it did with silver and red.  The figure is packed with “Deep Sea Weapns”, which translates to a missile launcher and two missiles.

THE ME HALF OF THE EQUATION

I got my original copy of this figure from the KB Toys near my family’s usual vacation spot, during an off-season visit, I believe shortly before my brother was born?  He was appropriately thematic for the trip, but beyond that, he was never a major focus in my collection, especially because I lost most of his armor, and that made him extra pointless.  I wound up getting a replacement very recently, when a complete one came into All Time.  He’s neat, but perhaps not the coolest of the Iron Men this line had to offer.

#3784: Nurse Chapel

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

NURSE CHAPEL

STAR TREK (PLAYMATES)

Okay, we’re doing this Star Trek thing! One! More! Time!  …You know, for now, at least.  Today’s subject is Majel Barrett, Gene Roddenberry’s second wife, and a central piece of Trek since the very beginning.  Originally appearing as Pike’s “Number One” in the unaired pilot “The Cage,” Barrett’s role as a regular was removed when they went to series proper, but she returned as recurring character Nurse Christine Chapel (amongst many other roles throughout the franchise’s run).  Chapel was her most frequent on-screen role, and it also earned her a couple of action figures, the first of which I’m looking at today!

THE FIGURE ITSELF

Nurse Chapel is part of the fifth “mixed” assortment of their Star Trek line.  She was released at the same time as Rand, thereby wrapping up the auxiliary central cast to go with the main crew boxed set.  The figure stands just under 4 1/2 inches tall and she has 12 points of articulation.  The articulation’s all pretty standard for the line, with the caveat that her hip joints are restricted by the choice to go hard plastic on the skirt portion of her uniform.  Her sculpt is actually pretty good for the line.  The proportions are a bit more balanced than some of the others, notably avoiding the big-headed-ness of a lot of the line.  She’s also got a pretty respectable likeness to Barrett, which is nice to see.  There’s not a ton of texturing, but that’s on par with the other TOS figures, so she fits in well.  The color work is basic, but it’s cleanly handled, especially on the face.  Chapel is packed with a display stand (with her own unique medical insignia), as well as an assortment of medical instruments.  And she can even hold them all!

THE ME HALF OF THE EQUATION

It took me a while to get around to getting this one.  She was actually the last piece of the original crew I didn’t have, though I do remember my dad buying his copies of her and Rand new in store back in the ’90s.  I got this one loose, a could of loose Star Trek collections ago at work.  She’s honestly a pretty good figure.  The likeness is strong, and the proportions look good.  All in all, a neat little figure of a pretty important part of Trek lore.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3769: Vina as an Orion Animal Woman

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

VINA as an ORION ANIMAL WOMAN

STAR TREK (PLAYMATES)

In the last five years, I’ve reviewed a total of three Star Trek figures, which is, you know, not a lot of them.  Less than a yearly entry.  This is largely because I’m not really an avid Trekkie.  I am, however, unable to really avoid Trek.  It’s like a sort of a background noise of my life.  I do enjoy aspects of the franchise, with The Original Series being my personal favorite.  Pike’s always been my favorite Captain, and I quite like “The Cage” and its re-cut airing “The Menagerie.”  Playmates did a small set of figures based on the “The Cage” for its 30th anniversary, which included Pike, as well as the franchise’s first instance of the green-skinned space babe, Vina.

THE FIGURE ITSELF

Vina as an Orion Animal Woman was released under Playmates’ Classic Star Trek banner, as part of their larger “mixed” line in 1996.  She accompanied the other three “Cage” anniversary figures.  As the name implies, this figure is specifically based on Vina’s depiction as an Orion Animal Woman during one of the Talosian visions Pike experiences.  It’s not her standard look at all, but it’s by far the most distinctive one, and the one that everyone remembers.  The figure stands about 4 1/2 inches tall and she has 5 points of articulation.  Vina is notably not particularly posable.  She just gets the 5 points, and of those, only the shoulder joints are actually really usable.  She also really can’t stand.  Like, at all.  No position on those legs is gonna make it happen.  At least there’s a stand.  The sculpt was unique, and it’s an okay offering.  It’s pretty decent for the era.  The head’s got an okay likeness, and the proportions aren’t too crazy or off.  The paint work is generally on the basic side.  It’s inoffensive, but it gets the job done.  She’s packed with a display stand, a fountain, and a torch.  The fountain and torch are just solid color casts, in my figure’s case, blue.  She can’t actually hold anything, so they just sort of sit off to the side.

THE ME HALF OF THE EQUATION

I got the Pike figure from this set as a kid, and he was a favorite.  Spock and the Talosian I got later down the line.  This one was the last hold-out, and I was actively searching for her for a fair bit.  Thankfully, I was able to snag a loose one that got traded in with a sizable Trek collection during the summer last year.  She’s fine.  Not very playable, even for this line, but she at least looks pretty decent, and goes well with the rest of the set.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.