Tag Archives: A.I.M. Soldier

#3376: Classic Iron Man, Bolt Face Iron Man, & AIM Soldier

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CLASSIC IRON MAN, BOLT FACE IRON MAN, & AIM SOLDIER

MARVEL MINIMATES

2008 into 2009 was quite a resurgence for Iron Man, due to that whole, you know, really successful movie thing he had going for him.  In the world of Marvel Minimates, it meant that he went from a character with one release every now and then to a character that could very seriously be banked upon.  In the space of about a year, his number of Minimates tripled, and we even got some looping back for proper updates to older releases.  He wound up as an anchor figure for the line’s 25th series, which saw him get two different figures, each packed with an AIM Soldier.

THE FIGURES THEMSELVES

Classic Iron Man and the AIM Soldier were released in the 25th specialty series of Marvel Minimates, with Bolt Face Iron Man swapping out for Classic Iron Man in the one-per-case Variant set.  Classic Iron Man and the AIM soldier would both also see release in the third TRU-exclusive series, albeit split up and packed with other figures (Mark I War Machine for Classic IM and Bucky Cap for the AIM Soldier).  Series 25 hit in May of 2009, and TRU Series 3 hit the following month.

CLASSIC IRON MAN

“Continually improving his Iron Man armor designs, the brilliant Tony Stark’s early red and gold armor set the standard for years to come by combining lightweight and maneuverable armor with new Repulsor technology!”

Iron Man had debuted with his classic armor in Series 6, but it had been a couple of years since that at this point, and there hadn’t been a proper update to the design since.  With all of the new attention, DST opted to do an all-new one, based again on his ’70s-’80s armor.  The figure is built on the standard post-C3 ‘mate body, so he’s about 2 1/2 inches tall and he has 14 points of articulation.  Classic Iron Man got a rather astounding 9 add-on pieces for this release, which included the helmet, belt, collar, shoulder, arm, and leg cuffs.  All of the pieces were new for this release, and represented DST moving to a generally more sculpted approach to even classically-based designs, although it also showed more of a melding between purely sculpted and printed detailing, as well as a general slimming down of certain figures.  The gloves and boots get cuffs without the need of full hand and feet pieces, and the shoulders get their add-ons without needing to bulk up the whole torso.  It was honestly a pretty big change-up.  The shoulders in particular are a little frustrating, since they had trouble staying properly in place, but they do look good when properly set.  Iron Man’s paint work is pretty involve, with a lot of detail line work on just about all of the surfaces.  While the prior Classic Iron Man had used flat colors, this one used metallic red and gold.  The gold’s a little on the orange side, which kind of muddies the look just a bit.  On the plus side, it’s held up better long term than other gold paints, so it at least doesn’t look awful.  I was never much of a fan of the face plate on the helmet for this guy, though; something about the spacing of the eyes, coupled with the actual eyes being visible, just doesn’t work for me.  It was a pretty common complaint at the time of release, and DST changed it up for later releases of the designs, so they seemed to agree.  Under the helmet, there’s a slightly more intense facial expression for Tony, which was honestly a pretty decent look.  Classic Iron Man was packed with an alternate hair piece (re-used from 24‘s Tony Almeida) and an alternate left repulsor hand.

BOLT FACE IRON MAN

“Similar to his previous armor designs, this improved model featured modular components such as the Black Light Tracer, Reverser Ray, Miniature Generator and even a Proximity Alarm designed to mimic Spider-Man’s Spider Sense!”

We couldn’t just have one Iron Man, so we got two instead.  This one goes for a just prior to classic look, ever so affectionately dubbed “Bolt Face” due to the rivets on the faceplate.  We’d sort of gotten this armor before in its horn-masked iteration, but this was the first proper “Bolt Face.”  Structurally, he’s largely the same as the standard version, though he ditches the shoulder add-ons and gets the Series 6 belt, which gives him a slightly older school look.  His paint scheme is also pretty similar, with the shades all being the same, but the actual detail lines being changed up.  They’re really nice, not as over detailed as Classic, and just a very nice recreation of his comics look for this one.  This time around, the helmet gets blacked out eyes, and the spacing just generally looks a bit better.  The face under the helmet is a lot calmer than the standard, and is again a very ’60s looking Tony, which I really like.  Bolt Face IM got an alternate hair piece (re-used from Jack Bauer), and a repulsor hand, just like he Classic.  He also got a spare helmet, which represents the short-lived nosed faceplate, as well as the shoulder pieces, so that you could turn him into a slightly later stage Iron Man.  Technically, the pieces don’t really match the rest of the detailing on the armor, and would be more at home on the standard Iron Man.  And, actually, swapping the nosed helmet to the Classic Iron Man fixes my only real issue with that figure, and lets me leave this one in all its Bolt-Faced glory.

AIM SOLDIER

“Capable of both saving the world and destroying it, Advanced Idea Mechanics is a powerful terrorist group consisting of brilliant yet misguided scientists determined to invent more and more destructive weapons.”

The AIM Soldier marked an important change for Marvel Minimates: Army Builders!  Up to this point, you were forced to buy a duplicate of the figure packed with the Variant, and it was at this point that DST officially decided to try to make lemonade out of those lemons, and make the duped figure one that people might not mind having a dupe of.  The first offering in the army building venture was those crazy beekeeper guys themselves, who are honestly a pretty natural choice.  The AIM Soldier had two add-on pieces, one for the mask and one for the holster.  The mask was an all-new piece, and a pretty spot-on one for their classic comics look.  The holster was a re-use from Assault Punisher, and it’s a little bulky, but it’s also very easily removed if it’s not your thing.  The paint work does a quite nice job of capturing the usual AIM design; there’s plenty of line work on the suits, bot front and back, and the belts even continue all the way around the waist.  Under the mask, there’s a fully detailed face with ears and a pair of lenses.  The AIM Soldier included a standard pistol (re-used again from Assault Punisher), and a larger rotary gun, which is a slight reworking of one of of War Machine’s cannons.

THE ME HALF OF THE EQUATION

When this series and the Series 28 (which was originally Series 26, before it got bumped for the Origins tie-in assortment) line-ups were revealed, DST ran a contest to guess the line-ups based on daily clues.  I was actually quite good at it, and wound up winning a fair bit of free stuff because of it.  Interestingly, Iron Man and his variant were the two that stumped me, but I did get the AIM Soldier.  In general, the whole thing made me very pumped for both assortments, which, as per usual for the time, I got via Cosmic Comix.  Classic Iron Man wasn’t my go-to at the time of release, nor has he really stuck with me.  The variant, on the other hand, remains one of my favorite Iron Man variants.  Likewise, the AIM Soldier’s top two for army builders for me.

#2837: A.I.M. Scientist Supreme

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

A.I.M. SCIENTIST SUPREME

MARVEL LEGENDS (HASBRO)

“Brilliant and diabolical, the Scientist Supreme helms a massive criminal cabal known as Advanced Idea Mechanics (A.I.M).”

In the last few years, we’ve finally gotten some proper appreciation for AIM and their weird beekeeper looking mooks, which I have very definitely been all about.  But, you always have to be wondering “is this the best I can do in terms of weird beekeeper looking mooks?”  Couldn’t there be better, more advanced weird beekeeper looking mooks?  I say there could!  What if we added sour cream and tomatoes!  What’s that?  I’ve already used the “sour cream and tomatoes = supreme” joke?  But I’m just so darn proud of it, you guys!  Well, fine, maybe this new AIM Scientist doesn’t have sour cream and tomatoes, but he’s certainly “supreme” now isn’t he?

THE FIGURE ITSELF

The AIM Scientist Supreme is figure 6 in the Xemnu Series of Marvel Legends, placing him just after the Red Skull figure that I totally reviewed out of order because I felt like it.  Unlike the others in this set, he’s not so much a specific character, as he is sort of a role that needs to be filled.  There have been a number of Scientists Supreme over the years, and while they tend to just look more or less the same as the regular AIM guys, but this one seems to be more specifically based on the Andrew Forson version.  He’s a little more beefed up and advanced, which is fine by me.  I can definitely dig this look, and it works for pretty much anyone else who’s held the role as well.  The figure stands about 6 1/2 and he has 31 points of articulation.  Structurally, the Scientist Supreme is largely borrowing from the modern style Taskmaster figure (who also served as a basis for a lot of Hydra Supreme, so he’s just a supreme sort of mold, I guess), using that figure’s arms and legs, along with an all-new head, torso, and pelvis.  The armored parts from Taskmaster are really well implemented parts, and they match up with the more modern Scientist Supreme design quite well, so they’re certainly well chosen.  The new pieces line up pretty well with the old parts, and present a very clean and sleek look for the character.  I also really appreciate the new articulation styles on the mid-torso and neck joints, which give him an improved range of motion.  The Scientist Supreme’s paint work is another pretty straight forward offering.  It’s pretty clean, and the gold is a nice color scheme for him.  It’s different from the straight yellow of the standard guys, but it still meshes pretty well with them.  The Scientist Supreme is packed with a sort of a data pad sort of thing, which is a fun piece, as well as the right arm of the Xemnu Build-A-Figure.  It’s a little lighter than some of the others, but at least the data pad is unique.

THE ME HALF OF THE EQUATION

When this line-up was initially hinted at, and all we had to go on was “AIM Supreme,” I didn’t know exactly what to expect on this guy.  I haven’t been super up to date with the various designs, but when this one was shown off, I definitely liked the general look of him.  He’s another fun design, and that translates to another fun figure.  He does what he does pretty well, and that ranks him pretty high on my list.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#1870: A.I.M. Scientist & Trooper

Posted by Ethan Wilson in Reviews and tagged with , , , ,

A.I.M. SCIENTIST & A.I.M. TROOPER

MARVEL LEGENDS (HASBRO)

“A.I.M., or Advanced Idea Mechanics, is a scientific organization bent on designing the technology that can take over the world.  Combined with the brute force of the Shock Trooper, the A.I.M. scientists innovate international design in the pursuit of world domination.”

Though in many ways the Legends brand was revitalized from the time Hasbro slapped “Infinite Series” on the box, there was still a little bit of a learning curve in those earlier days of the line.  In particular, swap figures, something they’d introduced during the Return of Marvel Legends era, which replaced one figure in early assortments with another for refreshment cases, still persisted throughout Infinite Series’ first year (and the shared names would continue for a few more after that).  One of the earliest Infinite Series offerings, the Captain America-themed Mandroid Series, was perhaps most affected.  Though both versions of the Agents of Hydra (Red Skull and a Hydra Agent) and the Soldiers of A.I.M. (Zemo and an A.I.M. Soldier) shipped side by side in early cases, the revision cases that hit a few months later strangely chose to repack only the non-army builder versions, leaving the army builders with a rather hefty after market value.  Hasbro first tackled this issue with the TRU exclusive “Agents of Hydra” two-pack from last year, which offered up one of the two army builders.  It was initially scarce, due to TRU’s spotty distribution, but with them out of the way, it’s actually become quite easy to get.  Hasbro has wisely chosen to follow that set up with a complimentary A.I.M. two-pack.

THE FIGURES THEMSELVES

The Soldiers of A.I.M. two-pack is an Entertainment Earth “exclusive” (meaning it’s available to all of the retail establishments that order through EE).  EE has picked up most of the former TRU-exclusives (including unsold stock of the Hydra pack), so It’s not hard to imagine this pair were originally slated for a TRU release.

A.I.M. SCIENTIST

Pairing off with the Hydra Agent from the other pack is the A.I.M. Scientist.  He’s more or less a reissue of the A.I.M. Soldier from the Mandroid series.  That being said, there the Hydra Agent’s differences were really limited to just the accessories, the Scientist’s changes go a little further.  Basic construction is the same.  He stands 6 1/2 inches tall and he has 29 points of articulation.  He uses the jumpsuit-ed body from the original, which works just as well now as it did the first time.  The only notable tweak is that his head seems to sit a little lower on the neck, which is a definite improvement.  Of course, it’s possible that my original was just slightly mis-molded.  The paint work has had some changes as well.  He’s the same basic yellow as the last one (so they’ll match up fine for army builders), but his visor and gloves are now black, and the “skirt” of his belt piece is molded yellow rather than painted, so it actually matches this time.  While I was initially a little bummed by the switch to black for the visor, I actually find myself preferring how it looks overall.  Now, let’s talk about the fun stuff: the accessories!  Now, it’s worth noting that this set’s accessories are a lot less figure specific than the Hydra set’s were, so I’ve tried to group them as best I could.  Like the prior release, this figure includes a bandolier, a large blaster, and a small blaster.  These are all the same as before (apart from a little extra detailing on the bandolier), and are still fun additions.  I particularly like “A.I.M.” being printed on the sides of the guns.  He also includes a shoulder harness molded in brown, and a second head (repainted from Paladin).  The head could just as easily go with the other figure (especially since it was on the other body in its original release, but I think it really works here, in a Bill, Agent of A.I.M. sort of way.

A.I.M. TROOPER

The second figure is sort of a counterpart to the Hydra Enforcer, dubbed a Shock Trooper by the back of the packaging.  He’s not your standard A.I.M. guy, that’s for sure.  He too is complete re-use, but is a rather crafty selection of parts.  He’s built on Paladin’s body (which was itself re-worked from Blade, who was in turn re-worked from ASM2 Electro), with Scourge’s head thrown on it (sort of pairing off with the Taskmaster head from the Hydra set), all done up in A.I.M.’s signature black and yellow.  A new coat of paint makes these parts look surprisingly new.  And while he’s still got a very distinct look about him, he also lends himself far more to being a troop builder than I felt the Enforcer did.  This guy comes packed with a knife and pistol, done up in colors to match him, as well as one of Deadpools rifles, again colored to match.  For variety’s sake, the Trooper also includes another shoulder harness (this time in a grey/blue), Deathlok’s backpack in yellow, and another standard issue A.I.M. beekeeper’s mask.  The last piece looks a little goofy on this guy, but I appreciate the option to further A.I.M.-ize him, and I even more appreciate the ability to make my prior A.I.M. Soldiers properly match up with this new set.

THE ME HALF OF THE EQUATION

Since I actually found an A.I.M. Soldier, there wasn’t as much of a dire need to get this set as there was with the Hydra pack, so when they were shown off, I knew I’d want one, but I was kind of ambivalent to the whole thing.  Then I saw it in person, and my mind changed.  And then I opened it up and my mind changed even more.  The Hydra set may have been more essential to me, but this one’s more fun.  The improvements to the standard A.I.M. guy are enough to make him the superior offering when compared to the original release, and I find myself really, really liking the Trooper, far more than I did the Enforcer, and far more than I’d expected to.  Hasbro’s inventiveness is really well showcased here.

I grabbed this pair from my friends at All Time Toys.  As of this writing, this pack is still in-stock, so if you’re interested in this, or any other Marvel Legends figures, or are looking for other cool toys both old and new, please check out their website and their eBay Store.

#1193: A.I.M. Soldier

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

A.I.M. SOLDIER

MARVEL LEGENDS INFINITE SERIES

aim1

Back when Toy Biz was still handling Marvel toys, they were prone to showing off figures that would never see the light of day (and they frequently showed them after these decisions were made, because apparently someone working there just loooooved rubbing salt in wounds).  For the 13th series of Marvel Legends, dubbed “Bring on the Bad Guys,” they initially planned to pack each villain with one of the Marvel universe’s many faceless henchmen, but they were eventually cut and replaced with the Onslaught Build-A-Figure.  Seven henchmen were shown: a Skull, a Brood, a Hand Ninja, a Hellfire Club Guard, a Doom Bot, a Hydra Agent, and an A.I.M. Soldier.  The Scrull and Brood eventually were released as part of DST’s Marvel Select line, and Hasbro would release their own versions of the Hydra Agent and Hand Ninja.  When it came time to make an A.I.M. Soldier, Hasbro has switched to the smaller-scale Marvel Universe line; he was a cool figure and all, but it just wasn’t the same.  Eight years after Series 13’s release, the A.I.M. Soldier finally made his way into Marvel Legends.  That’s the figure I’ll be looking at today!

THE FIGURE ITSELF

aim2The A.I.M. Soldier was released in the first series of the Captain America: The Winter Solider Marvel Legends Infinite Series.  The official title is “Soldiers of A.I.M.” which he shared with Baron Zemo (who I reviewed back when he was new).  It certainly fits him better than it did Zemo.  The figure stands about 6 1/2 inches tall and he has 29 points of articulation.  At the time of his release, the A.I.M. Soldier was an all-new sculpt, but most of the body was re-used for last year’s Ghost Rider. He has a different head, obviously, depicting the signature “beekeeper’s mask,” as well as different forearms, and a unique belt.  The overall appearance is that of the classic A.I.M. design.  There are some slight discrepancies on the front of the chest and the specifics of the gloves, due to this body being preemptively designed to work for the comic version of Star-Lord released just a few months after this figure.  The discrepancies aren’t anything incredibly distracting, and there have been enough slight variations to the A.I.M. design that it doesn’t immediately jump out as being “wrong.”  Plus, it’s just an A.I.M. Soldier.  How important is it for them to be spot on?  The figure also gets an add-on piece for his bandolier, which gives him some nice extra details (and also covers up some of those inaccuracies on the torso).  In terms of paint, the A.I.M. Soldier is decent enough.  He manages use lots of yellow without looking totally ridiculous (he’s still ridiculous, but not totally ridiculous), and most of the application is pretty clean.  There’s a slight matching issue with the yellow at the bottom of the belt piece, but that’s really it.  The A.I.M. Soldier included two blasters, one large and one small, as well as right arm of the Mandroid (the same piece included with Zemo).

THE ME HALF OF THE EQUATION

The Mandroid Series was back when Hasbro was  still working out some of their distribution issues, and also still learning some hard lessons about case-packouts.  While I got all of the necessary pieces for the Mandroid, I never had any luck finding the two swap figures.  While I was out for my birthday last year, I found this guy at 2nd Chance Toyz.  He was loose, but I already had the BAF piece, so no big deal there.  I’m glad to finally have him, and I feel he was worth the wait.  Now, I’ll take my Hellfire Club Guard whenever you’re ready, Hasbro.