Tag Archives: A New Hope

#3881: Darth Vader

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

DARTH VADER

STAR WARS: POWER OF THE FORCE II (HASBRO)

“Darth Vader was known and feared throughout the galaxy as incredibly ruthless and evil, one who used the awesome powers of the dark side of the Force to carry out Emperor Palpatine’s horrific plans. But deep inside Lord Vader lay vestiges of the person he once was: young Anakin Skywalker, discovered on the planet Tatooine by a Jedi Knight who recognized the boy’s special Force talents. Anakin showed much promise and grew to be a great Jedi. Finally, the dark side beckoned him – and Anakin became Darth Vader.”

I’ve circled back a few times with Power Force regarding its initial approach to the characters with minimal changes between the films in the original trilogy.  At the start, they went with the same set-up as the vintage Kenner line, so characters like Vader, Chewbacca, R2, and 3PO each got one sort of averaged out, all encompassing figure.  As the line expanded, however, they clearly realized how limiting that might be, so slightly more diversified, film specific variants made their way in.  1998 kicked off with a rather specifically Return of the Jedi Vader with a fancy removable helmet and the proper inner robe he’d not had before.  At the end of the year, another Vader did something else never done before: a specifically A New Hope Vader.  It held that title for less than a year, but that’s hardly the point.  Let’s jump into to this short span Vader, shall we?

THE FIGURE ITSELF

Darth Vader was released in 1998’s first portion of the “Flashback Photo” Power of the Force II figures.  There was quite an A New Hope focus in this round of figures.  Vader, for his part, with his included lightsaber and slight action pose, was definitely designed to pair off with Obi-Wan from the same set.  The figure is just over 3 3/4 inches tall and he has 10 points of articulation.  He sported the same improved articulation as much of the other figures in this particular sub-set.  It does allow him to properly hold his lightsaber with both hands, which is at least pretty nice.  His sculpt was all-new, though it would see re-use a few times down the line later.  It’s…well, it’s something.  After the far improved sculpt we saw on the removable helmet Vader, this one is rather a step back, feeling far more in line with the earlier, puffier Vaders from the line.  The improved mobility is nice, but ultimately limited by how much extra bulk he’s got going on.  There’s at least some rather sharply sculpted texturing, so he’s a general step up from the original Vader in a purely technical sense.  The inner robe, which goes over his shoulder plate, is properly detailed, and even looks like its properly hanging on the armor beneath.  His paint work is also a bit better.  There are some more subtleties, with variations on the finish of the black sections, as well as red lenses on the eyes of the helmet.  Vader is packed with his lightsaber, as well as the Flashback Photo thingy.  It shows Vader proper, and then younger Anakin for the second time.

THE ME HALF OF THE EQUATION

In a line with a bunch of rather similar Darth Vader figures, this one is notable for the lack of any real distinguishing features.  I guess he’s got some extra articulation?  For me, he falls squarely into “bought it for completion’s sake” territory.  I got him alongside a few of the other Flashback figures because he was there and I was getting the rest.  Luke and Obi-Wan were both figures I regretted waiting so long to actually open, but Vader…Vader’s just sort of meh.  He does nothing to really stand out at all.

Shoutout to All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3877: Luke Skywalker

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

LUKE SKYWALKER

STAR WAR: POWER OF THE FORCE II (HASBRO)

“Bored with the mundane life of a moisture farmer on Tatooine, Luke Skywalker dreamed of being a great pilot. He targeted womp rats while racing his T-16 skyhopper through the steep and narrow walls of Beggar’s Canyon. Many years earlier, Luke’s father also raced over the surface of Tatooine in his podracer. Anakin eventually turned to the dark side and became Darth Vader but was finally redeemed by his son Luke.”

In the whole of the vintage Kenner run of Star Wars 3 3/4-inch figures, we got Luke’s “farmboy” look exactly once.  When Power of the Force II launched in the ’90s, the look got its second go right away.  And then it showed back up in 1998, and just… Kept. Showing. Up.  Between 1998 and 1999, there were no less than five versions of Farmboy Luke available, which is is a lot.  Today’s figure?  Well, he got a new hat.  No, seriously: he got a new hat.  Let’s look a Luke and his new hat.

THE FIGURE ITSELF

Luke Skywalker was released in the initial 1998 “Flashback Photo” assortment of Power of the Force.  The set had a rather “greatest hits” vibe to it, and Luke was right at home with that set-up.  This was the fourth of the five Farmboy Lukes in the ’98-’99 run.  He’s notable for being based on a deleted scene from the original film, which would have introduced Luke earlier than his purchase of the droids.  It’s interesting, because I think this was the first figure of its kind, which is pretty neat.  The figure stands 3 3/4 inches tall and he has a whopping 10 points of articulation.  He starts with the standard 6 and then also gets hinges at the elbows and swivels at the wrists, to say nothing of his neck joint being a ball joint, rather than the standard swivel.  He’s by far the most posable Luke in the line, which is somewhat amusing, given he’s not supposed to be from an action scene.  Though his sculpt looks very similar to the other four Farmboy Lukes, its wholly unique, thanks to how the articulation is implemented.  Honestly, it’s pretty nice.  The proportions aren’t the wacky muscle-bound set-up from earlier in the line, and the head’s an okay likeness.  The articulation’s useful, but also doesn’t ruin the sculpt.  I dig it.  The paint is pretty much what we expect on this sort of figure.  It’s clean, and there’s a little bit of accenting on the boots and bands, which helps the sculpt.  Luke was packed with three scene specific accessories.  He’s got the aforementioned hat, a rifle, and a pair of binoculars.  The hat’s funny, but also unique, and it stays okay on his head.  The rifle gets a surprising amount of painted detailing, and the binoculars can plug onto his belt for storage.  He also gets the Flashback Photo, showing him, and when you pull the tab, a young Anakin.

THE ME HALF OF THE EQUATION

I owned none of these growing up, but saw them many times.  When I made my first real push to start a complete run, this Luke, along with the Leia from last week, were two of the first figures I snagged….and then I didn’t open them for, like, six years.  Yikes.  Seriously, I opened this figure less than 24 hours before I wrote this review, and that’s honestly ridiculous.  What was I doing?  Other stuff, I guess.  I like this Luke a lot.  He’s very fun.  I wish I’d opened him earlier, but I have now, and that’s pretty cool.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3849: Kabe & Muftak

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

KABE & MUFTAK

STAR WARS: POWER OF THE FORCE (KENNER)

The ’90s run of Power of the Force has a pretty impressive depth to it, making it the first really notable example of getting a bunch of figures based on all the blin-and-you’ll-miss-them aliens that appear in the original trilogy.  Obviously, it was just sort of the tip of the iceberg in terms of what Hasbro would do as the line expanded, but there are still a number of characters who got their first figures under PotF and haven’t yet gotten a follow-up.  Today’s entry, which focuses on two patrons of the Mos Eisley cantina, is kind of in line with that.  So, let’s look at Kabe and Muftak.

THE FIGURES THEMSELVES

Kabe and Muftak were an online-exclusive Star Wars: Power of the Force release, made available on Hasbro’s direct shop in 1998.

Kabe here is the smaller of the two included figures, putting her somewhere in the area of Jawa sizing in terms of scale. She’s technically the more fortunate of the two figures, having gotten a second figure after this one (though that one was really just a minor repaint of this one).  The figure stands 2 1/2 inches tall and she has 4 points of articulation.  Since she’s got that long robe over the legs, she get no movement there, with movement ending at the waist.  It does at least make her a rather stable figure.  Her sculpt is fine.  It’s a little rough, for sure.  A lot of the Power of the Force figures are somewhat dated looking, but still look finalized, but Kabe is…well, she feels a little bit unfinished.  I think it may be partly to do with the available reference material, or rather the lack of it, since she’s not exactly a highly visible character.  But, it’s at leas rather unique, so I guess there’s that.  The vest is a separate piece, so you can remove it for a bit more customizability, and perhaps give it to another smaller creature?  I do rather like her paint work, which adds quite a bit of accenting, and really helps to offset the more unfinished nature of the sculpt.  Kabe is packed with a sci-fi knife thingy.

Muftak is the one-and-done of the set (though the sculpt was re-used in the Saga Collection line for Foul Moudama, from Clone Wars), so there’s more riding on this one?  Also he’s a lot larger.  The figure stands 4 1/2 inches tall and has 6 points of articulation.  He’s very tall, but not very posable.  But, he’s also a bit pre-posed.  So there’s that.  I do like that one elbow swivel he’s got.  He’s sporting an at the time unique sculpt.  It’s actually quite a nice sculpt.  The fur detailing is solid, showing a better flow than most of the Chewbaccas from the line, and his generally unique look is sold rather well.  He’s also just nice and solid-feeling, and stands really well on his own.  Just a lot of wins there.  The paint’s not bad.  There’s same accenting and shading on the fur, which is perhaps a touch heavy in some spots, but overall works quite well.  Muftak is packed with a larger blaster pistol, which he can rather awkwardly hold in his left hand, if you’re so inclined.

THE ME HALF OF THE EQUATION

I’m firmly in the group of people that would probably have no clue these characters even existed were it not for the figures.  And, also the decision to go completist on this line.  The web exclusives can be a bit spotty on ease of access, mostly because so many people ignored them for so long.  They’re not expensive, but they’re rarer to show up.  I snagged these two, loose, from a sizable Star Wars collection traded into All Time a couple of years ago.  Kabe’s nothing much to write home about, but Muftak’s honestly pretty cool.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3732: Momaw Nadon

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

MOMAW NADON

STAR WARS: THE BLACK SERIES (HASBRO)

“An exile from Ithor, Momaw Nadon was a rebel sympathizer who cultivated a hidden garden in the mountains south of Mos Eisley”

Hey, look, I was just talking about the slowdown of Black Series reviews around here on Tuesday, and I’m already reviewing another one.  So much for spacing them out, right?  Alright, so the last one was a rather modern entry in the franchise, but today, I’m jumping back to the beginning, with one of the first movie’s many distinctive alien designs, Momaw Nadon.  Momaw appears only in a head shot during A New Hope‘s cantina sequence in Mos Eisley, and was at the time unnamed.  When Kenner entered their second year with the license, they made up their own version of his body and named him “Hammerhead,” with his proper name not being granted to him until 1989, along with an actual backstory, and a full design.  He’s become a recurring fixture of the Star Wars toy lines since, and now he’s the latest cantina alien to join The Black Series!

THE FIGURE ITSELF

Momaw Nadon is figure 7 in the A New Hope sub-set of Star Wars: The Black Series‘ Phase IV incarnation.  Thus far, five of the seven ANH figures have been cantina-themed, so he’s in good company.  Like Tuesday’s IG-12, Momaw is at the deluxe price point, which still feels kind like a hazy distinction, but he does a have a little more to him than the average Black Series release.  Momaw is a Fan Channel-exclusive offering, so no big box stores for him.  After the poor performance of the last three cantina aliens that went to mass retail, it’s probably not the worst call.  The figure is about 6 3/4 inches tall and he has 26 points of articulation.  Momaw’s sculpt shares a good number of its parts with fellow Ithorian Dok-Ondar, who was a Galaxy’s Edge Disney Parks-exclusive last year.  He gets a new head, forearms, belt/skirt, and scarf, allowing him to be differentiated from Ondar.  It’s a solid sculpt, through and through.  There’s a lot of texturing going on, which looks really great, and the new head’s a good match for what we see on screen.  His articulation scheme’s pretty much what we’ve come to expect from Black Series at this point, so he’s pretty mobile for the most part.  His color work’s not bad.  Notably, the exposed skin gets a wash to help accent the sculpted texturing, which really does help.  In terms of accessories, he does feel a little light.  There’s a blaster rifle, and three different cups.  I don’t know *exactly* what you could give him, but he’s a deluxe, so *something* more would be nice.  Even a recreation of his Power of the Force era big honkin’ gun would be cool.

THE ME HALF OF THE EQUATION

I’d say this guy was an impulse buy, but he wasn’t quite that.  I mean, I didn’t know if I was gonna buy him ahead of time, but by the time he’d arrived in-store, I was pretty sure.  This is just one of those designs I have a hard time saying no to, because it certainly does look cool.  He’s a pretty nifty figure.  Not a ton to say beyond that, but I’m not really sure there’s a ton that *needs* to be said beyond that.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3703: Darth Vader

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

DARTH VADER

STAR WARS: POWER OF THE FORCE (HASBRO)

“Inside the Death Star’s detention corridor, Darth Vader is intent on snapping Princess Leia’s defiance. Accompanied by an Imperial interrogation droid, the Sith Lord enters cell 2187, determined to learn the location of the hidden Rebel base from his royal prisoner”

Jumping from one caped guy in black to the next, in 1/18 scale no less!  So, look, guys, I have a lot of Star Wars figures sitting around here.  There’s a notable backlog of those guys I gotta work my way through, so I might as well do a little bit of that now.  And, if I’ve got a helping of Star Wars reviews coming at you, you know I gotta start it off with Power of the Force, because here I am with a bunch of Power of the Force, specifically.  The line had an impressive coverage of the depth of characters from the galaxy far, far away, but it also had a lot of variants of the main characters from the original trilogy.  For characters with similar looks for all three films, such as Darth Vader, the figures were pretty similar and meant to be more all-purpose, but before the end of the line, they started going a bit more movie-specific.  I’m looking at the line’s last take on Vader today.

THE FIGURE ITSELF

Darth Vader was added to the Power of the Force line in 1999, as part of the first of the two CommTech assortments that wrapped up the line.  As the line’s last hurrah, there was certainly a focus on heavy hitters.  The figure stands just over 4 inches tall and he has 8 points of articulation.  He’s got those extra swivels on his elbows, as the line experimented with going beyond the basic 6 they’d launched with.  It doesn’t do a ton, but it adds to the variety, I suppose.  For his last entry in the line, Vader goes decidedly back to the beginning, with our very first specifically A New Hope-inspired Vader, focussing directly on his appearance in the interrogation scene.  His sculpt was all-new, and is quite a strong one.  It wound up getting re-used a bit down the line due to how strong it was.  It’s a little pre-posed, again going into the scene specific bit, with his hands posed near his belt.  The proportions are solid, moving entirely away from the buff look of the early figures.  The details are also really sharp, which is nice.  The cape is cloth this time, which is a little awkward at this scale, but ultimately works okay if you get the posing right.  His paint work is simple, largely relying on molded black plastic, but there’s some variety worked in there.  Vader was packed with the interrogation droid (aka Dr. Ball, MD), who has its own little flight stand.  He’s also got the CommTech stand, for CommTech stand purposes.  He is, notably, devoid of a lightsaber, since there’s a hilt sculpted to the body, and he doesn’t use the saber in the Interrogation scene.  Later uses of the mold would fix that, though.

THE ME HALF OF THE EQUATION

It took me a surprisingly long time to get this figure.  When I really jumped into the Power of the Force thing, All Time even had a sealed one, but I didn’t snag him at the time, and he sold before I got him.  My first encounter with this mold was actually one if its later uses, namely the comic pack version, so I did at least know what to expect.  I wound up snagging this one loose just a few months ago.  He’s honestly pretty solid, and probably the best Vader in the line, so it’s a good note to go out on.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3663: Death Star Escape

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

HAN SOLO, CHEWBACCA, & LUKE SKYWALKER

STAR WARS: POWER OF THE FORCE II (KENNER)

“The Rebel Alliance has infiltrated the Galactic Empire’s most powerful battle station, the Death Star! posing as stormtroopers escorting a prisoner, Han Solo, Luke Skywalker and Chewbacca attempt a daring rescue of the captive Princess Leia. Can they escape the dreaded Death Star, or is the Rebellion about to suffer the loss of its newest heroes?”

Hey, Cinema Scenes!  It’s been a hot minute since I’ve looked at one of these!  While Kenner/Hasbro used the later run of Cinema Scenes to fill in more obscure characters from the background of specific scenes, the earliest run of the line was more about recreating distinctive scenes, often with variants of previously released figures from the line.  One of the earliest recreated scenes was the first film’s escape from the Death Star detention center, which I’m taking a look at today!

THE FIGURES THEMSELVES

The “Death Star Escape” set was the Power of the Force line’s debut Cinema Scenes set, released in 1997 as a Toys “R” Us exclusive.  As with all of the Cinema Scenes sets, in addition to the three figures, this set also included a stand, meant to look like a section of the Death Star’s floor.

HAN SOLO

Originally confined to a Froot Loops promotional offer, Stormtrooper disguise Han made a pretty quick reappearance here. The figure is about 3 3/4 inches tall and he has the usual 6 points of articulation. His sculpt is similar to the previous one, but different for the sake of different. His pose is certainly changed up, largely the arms, which are now stretched outwards. The prior version was one of the rare instances of a figure that could conceivably hold his weapon two-handed (though, ironically, he had no weapon to hold), but not so with this one, who is back to the single hand hold.  Han’s paint work is very similar to the mail-away version, but the plastic used is a little different.  The skin-tone on the head is paler, and the torso and pelvis are prone to discoloring over time.  Han is packed with his removable helmet, and a standard blaster rifle.

CHEWBACCA

Chewbacca doesn’t have a drastic shift in looks in the movies, so he didn’t have any drastic shifts in figures during Power of the Force either.  He started off with one figure to cover all of the movies, and this one is a very, very minor tweak on that.  The figure stands about 4 inches tall and he has 6 points of articulation, with the caveat of the neck not *really* moving.  He’s almost exactly the same figure as the standard release, with the only notable change being the position of the arms.  It’s Chewy at his most swoll, encapsulating the early line as a whole.  The color work is also pretty much identical, for what it’s worth.  He does get a new accessory, which is directly tied into the new arms: handcuffs!  Perfect for recreating the scene.

LUKE SKYWALKER

Luke’s Stormtrooper Disguised figure was a standard release, so we didn’t *need* a re-release, but, you know, you gotta finish up the scene, I guess.  He takes pretty much the same approach as the Han, replacing the more basic standing pose of the single release Luke with a a wider stance, even wider than Han’s.  He’s got the same basic color work, and he’s got the same issue with the discoloring on the torso and pelvis.  Paint work on the face is honestly a lot nicer, though, so he’s at least got that going for him.  And hey, look at that, same helmet and blaster as well.  Lot of same-ness going on.

THE ME HALF OF THE EQUATION

This is honestly a pretty common Cinema Scenes set, so it’s genuinely surprising it took me this long to get around to picking one up.  I guess the right opportunity never presented itself to me.  Well, you know, until it did, which is why I own it now.  I’d seen a couple of loose ones, but didn’t really want to go that route, but a sealed set came into All Time, and now I’ve got one.  It’s easily the weakest, most forgettable of these sets.  There’s nothing that really makes it worthwhile, and I genuinely only have it for completion’s sake.  I don’t know of any other reason to get one, but, at the same time, it’s not like it’s a *bad* set, or anything.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3610: Spacetrooper

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SPACETROOPER

STAR WARS: THE LEGACY COLLECTION (HASBRO)

Fun FiQ Fact #0089: Joe Johnston, director of Jumanji, The Rocketeer, and Captain America: The First Avenger, amongst other things, worked in the visual effects department for the original Star Wars trilogy, and had a hand in the design of both Boba Fett and his ship.

These days, my Star Wars collecting is rather focused.  I pick up the odd Black Series figure here and there, but beyond that, I’ve got my Power of the Force collection, and a selection of favorites from Clone Wars.  The other lines I generally skip, but there’s the occasional figure here and there that pique’s my interest, especially when it comes to the more fun behind the scenes stuff.  Like, for instance, today’s focus, the Spacetrooper!

THE FIGURE ITSELF

The Spacetrooper was part of the fifth assortment of Star Wars: The Legacy Collection, where he was numbered BD-32.  He was subsequently re-released the following year in a repack assortment with a new Build-A-Droid part.  All of the fifth assortment figures were based on A New Hope, and this guy was no exception; the Spacetrooper is visible outside the Death Star when the Millennium Falcon is pulled in by the tractor beam.  Essentially, he’s a standard Stormtrooper, with two extra bits to make him space ready.  The figure stands 3 3/4 inches tall and he has 22 points of articulation.  The movement on this guy represents pretty much the height of articulation for Star Wars prior to them finally doing away with the T-crotch joint that George Lucas apparently mandated.  It’s a rather mobile figure, but also kind of stiff?  I don’t know.  It’s certainly not bad for the time or the scale, and it’s less floppy than newer Star Wars figures.  The Spacetrooper’s sculpt used the sculpt that originated with the Vintage Original Trilogy Collection Stormtrooper as its starting point, but got an updated head and torso, and seems to generally be a slightly sharper rendition of the sculpt.  He’s got a removable helmet, which matches well with the non-removable equivalent for this body sculpt, and underneath, he’s got a head sporting the likeness of Joe Johnston, who was the guy actually in the Spacetrooper armor on set.  The paint work is decent enough; he’s got the basic black and white set-up, with the extra details under the helmet and all.  The Spacetrooper is packed with his rebreather pack and hose, which plug into his helmet and back, and are fairly secure.  He also gets a standard blaster, as well as a larger rifle, complete with moving handle.

THE ME REMAINDER OF THE EQUATION

I wasn’t really collecting much Star Wars when this figure came out, so I missed him when he was new.  He always intrigued me, though, so when I found a loose complete one through All Time, I jumped on it.  He’s a fun little figure, and, hey, now I’ve got a Joe Johnston figure!

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3165: The Modal Nodes

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

FIGRIN D’AN & NALAN CHEEL

STAR WARS: THE BLACK SERIES (HASBRO)

“Figrin D’an was the rocking frontman for the all-Bith band ‘The Modal Nodes.’ His deft playing of the Kloo Horn for the band earned him the nickname ‘Fiery’ Figrin

Members of the Modal Nodes, like Nalan Cheel on the Bandfill, played their recognizable tunes in the Mos Eisley cantina.”

There are quite a number of distinctive aliens present in the Mos Eisley Cantina in A New Hope, but my favorites are definitely the bunch of Bith up on the stage, the Modal Nodes.  Their catchy tune is key to the ambiance of the sequence, and they just look so snazzy in their matching outfits.  They don’t have a ton of action figure coverage, but they were in Power of the Force, and they’ve just been added to The Black Series, so that’s all that really matters to me.  So, I guess that’s all that matters to the site as well.  There are two members of the band available, with the frontman Figrin D’an in the main line, and Nalan Cheel as a deluxe exclusive.  I’m taking a look at both of them in a combo review today!

THE FIGURES THEMSELVES

Figrin D’an and Nalan Cheel are figures 4 and 5 in the A New Hope sub-set of Star Wars: The Black Series.  Figrin is part of the latest standard assortment of the main line (the largely Obi-Wan Kenobi-based assortment), while Nalan is a shared exclusive between Hasbro Pulse and Shop Disney.  Since all of the Nodes look effectively the same, the two are the same core figure, with the accessories marking the difference between the releases.  The core figure stands a little over 6 inches tall and he has 27 points of articulation.  The sculpt appears to be all-new to these two figures.  The articulation scheme is pretty impressive; the lack of the butterfly shoulders can make things a little tricky when posing with some of the instruments, but it’s generally pretty easy to work with.  As far as the quality of the sculpt proper, the head’s definitely the strongest work, capturing the look of the masks from the movie quite well.  The outfit seems to be the closest Hasbro’s gotten to the actual Modal Nodes attire of all the figures they’ve done.  It looks quite sharp, and I really like that.  The paint work on the core figure is well-handled.  Obviously, the outfit is basic, since it’s just flat black and grey.  The accenting on the head and hands is impressive, and really sells the detailing of the sculpt, and gives him a more lifelike quality.  Accessories mark where these two figures differ.  Figrin is the more basic release, so he gets his Kloo Horn, as well as a Dorenian Beshniquel (the slightly longer oboe-looking thing, played by Doikk Na’ts), and a Double Jocimer (the shortest instrument, played by Ickabel G’ont).  All of the instruments are really nicely sculpted and well-scaled, and the paint work is pretty respectable, and the mouth pieces even slot into the mouth, which is pretty cool.  As the deluxe, Nalan gets the larger set-up.  It’s still three instruments, but they’re literally larger, so, you know, that’s how it is.  He’s got his Bandfill (the organ looking thing), drums and matching drum sticks (played by Sun’il Ei’de), an Ommni Box (played by Tech M’or), and three additional sets of hands to match up with the instruments.  It’s again an impressive set-up, and all of these instruments work a little bit better with the core figure, I feel.  I quite like the drums, but I also dig the seated option of the Ommni Box.  I’m also really down for the extra hands, but I also appreciate that he’s still got the hands from Figrin, so that he can still use the extra instruments included with that release.

THE ME HALF OF THE EQUATION

The Cantina Band is one of those very memorable parts of the first movie, and one that I really like.  While I only got the PotF version a few years ago, I really liked him and the gimmick behind him.  When Figrin was announced I knew I was at least grabbing him, and maybe a few duplicates as I got the chance.  I missed out on the pre-orders for Nalan, and honestly wasn’t expecting to find him, but shortly after All Time got their standard assortment with Figrin, a Nalan got traded in, giving me an easy shot at both of them.  I really enjoy the core figure a lot, and all of the instruments are so nicely handled.  I will definitely be trying to snag a few more of the core body for a full band, but in the mean time, I’ve got the miracle of photoshop!

Thanks to my sponsors over at All Time Toys for setting me up with these figures to review.  If you’re looking for cool toys both old and new, please check out their website.

#3155: Princess Leia Organa – Yavin 4

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

PRINCESS LEIA ORGANA — YAVIN 4

STAR WARS: THE BLACK SERIES (HASBRO)

“After escaping Vader, Leia and her rescuers rendezvoused with the Alliance on Yavin 4. She delivered the Death Star Plans, and later gave Han, Chewie, and Luke medals for bravery”

Despite her tendency for plenty of costume changes in later films, in the first Star Wars, Leila’s in the same attire for almost the whole runtime. But, not content to at least show off a little extra flair, she does get one quick change, all the way at the end of the movie, gaining an ever so slightly more regal set-up for the film’s closing scene, set during an awards ceremony on Yavin, following the Death Star’s destruction. It’s very brief, and so brief that it didn’t actually get toy treatment in the vintage run, and had only rarely graced the toy lines since. However, with a Ceremony Luke out there for Black Series, it was only a matter of time before we also got a Leia.

THE FIGURE ITSELF

Princess Leia Organa (Yavin 4) is the first figure in the A New Hope sub-set of Hasbro’s Black Series.  She was part of the first assortment of the year, alongside fellow ANH figures Ponda Baba and Doctor Evazan.  This figure is a mainline release of the Hasbro Pulse-exclusive Power of the Force tribute figure from the end of last year.  The only difference between the two is the packaging, with the figure in said packaging being the same.  The figure stands just over 5 inches tall and she has 30 points of articulation. Her sculpt appears to be all-new, although it’s entirely possible that some of the Lowe body is shared with other releases. The upper half is definitely all-new, and it’s a pretty solid offering. The new head sculpt is one of Hasbro’s best takes on Fischer’s likeness, and the mixed media set-up of the rest of the body works better than prior Leias, especially the standard ANH Leia. The paint work is largely limited to the face; it handles things pretty well, and results in a lifelike appearance, which nicely accents the already strong sculpt. Leia’s only accessory across both of her releases is one of the medals she presents during the ceremony. It appears to be the same one included with Luke, so I suppose it can be used with Han, or even the con-exclusive jacketed Luke, since he lacked the medal.  Or, could go absolutely crazy and give it to Leia herself…you know, since she also participated in the whole plot to take down the Death Star as well, and didn’t even fake running away like Han did.  Just saying.

THE ME HALF OF THE EQUATION

I’ve been expecting this figure since we got the Luke release, though she took a bit longer than I’d expected, honestly. While she’s not the most thrilling release, it’s a design I like, and one that fits well in the style. She’s a good company piece for Luke, and perhaps we’ll actually get a proper ceremony Han at some point, just to round out the set. Until then, it’s a throw back to the ’90s with just these two.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#2855: Cantina Aliens

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

LABRIA, NABRUN LEIDS, & TAKEEL

STAR WARS: POWER OF THE FORCE II (KENNER)

“Their remote location makes the spaceports of Tatooine havens for many suspicious travelers from across the galaxy. At the Mos Eisley spaceport, Chalmun’s Cantina is a popular hangout for the rough crowd and deadly violence breaks out on a daily basis. Takeel, a Snivvian, is known to dabble in bounty hunting and smuggling. The horned Devaronian Labria calls himself an ‘information broker,’ though his information is questionable at best. No one knows for sure what the Morseerian known as Nabrun Leids looks like underneath his breath mask, which he must wear in all non-methane environments. The former fighter pilot will fly anyone or anything anywhere, if the price is suitable. These kinds of patrons have helped make Tatooine’s spaceports famous as a wretched hive of scum and villainy.”

Initially more focused on actually replicating scenes from the movies with maybe one new figure, and a few retooled ones to better fit the set-up, Power of the Force‘s “Cinema Scenes” line fairly quickly became a way for Kenner to quickly drop three whole new figures, very frequently of quite obscure characters, all in one shot, loosely connected by the theme of all being present in a given scene or locale.  We got two sets dedicated to the Mos Eisly Cantina.  The first was more plot relevant, depicting Obi-Wan facing off against Ponda Baba and Dr Evazan, but the second stuck to the background a bit, and gave us some obscure alien patrons.

THE FIGURES THEMSELVES

The “Cantina Aliens” Cinema Scenes set was added to the Power of the Force line in 1998, as part of the middle year of this particular sub-set.  After quite a bit of focus the first year, this set was the only one in 1998 to be based on A New Hope, and would likewise be the last of the ANH Cinema Scenes.

LABRIA

Officially named “Kardue’sai’Malloc”, this guy’s a weird looking devil dude with a sort of unfortunate name here.  So, you know, there’s that, I suppose.  He’s about 3 3/4 inches tall and he has 6 points of articulation.  He has some trouble balancing, at least on my copy, made even more difficult by the cape, which also cuts down on his shoulder articulation a little bit.  His sculpt is totally unique, and it does a respectable job of capturing the design from the film.  He’s in line with the rest of the mid-run PotF figures, with a slighlty bulked up build, and a bit of preposing (which also contributes to the difficulty standing).  The cape is removable, and has a rather nice draping effect which keeps it over the shoulders.  Honestly, one of the better capes from the line.  His paint work is pretty basic, and fairly monochromatic, but it gets the job done, and there’s more to it than it could be, so kudos to Kenner there.  He’s packed with a small blaster pistol.

NABRUN LEIDS

That freak!  In the gas mask!  …no, wait, that’s a different guy.  Sorry.  Nabrun Leids is another of the Cantina denizens, characterized by his face obscuring gas mask.  Slightly less obvious are the extra arms, but they’re there too.  The figure stands a little under 3 3/4 inches tall and has 8 points of articulation.  He’s granted two extra joints, thanks to the two extra arms.  His sculpt is another unique one (though it did get a repaint early in the ’00s as well), and it’s honestly not bad for the era.  It pretty much follows the design, at least what we can see of it, from the movie.  The paint work is again pretty basic, even more so than on Labria.  I do dig the pearlescent white plastic for the jumpsuit, though.  Nabrun is packed with a larger blaster rifle.  He has a little trouble holding it, but it’s a cool design.

TAKEEL

Last up is Takeel, a character that kind of already had a figure before this one, depending on how you look at things.  Takeel is part of the race commonly referred to as “Snaggletooth.”  There were two different Snaggletooths in the vintage line, one from a Cantina set, so arguably he’s technically a remake, I guess?  But the name’s unique to this one, so it gets murky.  The figure stands 3 3/4 inches tall and he has 6 points of articulation.  His sculpt is pretty decently rendered.  It’s certainly a better take on a Snivvian than the original, and one that doesn’t look too bad in a modern light.  I suppose there are some areas that could benefit from maybe some additional texture work, but it’s still a solid offering. The paint’s again on the basic side, and he’s probably the one figure in this set that could benefit from some extra accenting on the paint work, but the basics work out alright.  Takeel is packed with a smaller blaster rifle.

THE ME HALF OF THE EQUATION

I snagged this set when it was traded into All Time last summer, as part of a larger collection of figures.  I recall seeing this set, but it never much spoke to me as a kid.  None of these particular designs really jumped out at me, I guess.  I wasn’t expecting much from it when I cracked it open, but I honestly was pretty pleasantly surprised.  They’re all pretty solid aliens, and fill out the scene really nicely.