Tag Archives: A New Hope

#1556: Luke Skywalker

Posted by Ethan Wilson in Reviews and tagged with , , , ,

LUKE SKYWALKER

STAR WARS MIGHTY MUGGS (HASBRO)

Before Funko created the insane every property imaginable juggernaut that is Pop! Vinyl in 2009, there was Mighty Muggs, another attempt at creating a multi-property pop-culture-driven vinyl figure line.  Launched in 2007, Mighty Muggs were Hasbro’s go at the world of collectible vinyl.  They spanned Marvel, Star Wars, Indiana Jones, and even Hasbro’s in-house properties G.I. Joe and Transformers.  With a tagline of “Made from 100% recycled Awesome,” the figures originally debuted on a 6-inch base body, before eventually being scaled down into Mini Muggs in 2011.  They would be scaled down once more, into Micro Muggs, in 2012, before going on hiatus as a whole (apart from an out of the blue SDCC-exclusive ROM in 2014).  In light of Funko’s immense success with Pops, it would appear Hasbro’s giving the brand another try, albeit with a slight…twist…I assure you, that’ll be funnier once you’re done with the review.

THE FIGURE ITSELF

Luke is figure 03 in the first six-figure assortment of Star Wars Mighty Muggs.  The assortment offers a mix of old and new trilogy designs, with Luke coming from the old, specifically from A New Hope.  It’s kind of his quintessential look, so it’s a god place to start.  The figure stands about 3 1/2 inches tall, putting him somewhere in-between the scales of the old Mighty Muggs and Mini Muggs.  So, if you have the old ones, you’ll still be starting over.  Perhaps not coincidentally, this sizing means that Luke is almost exactly the same size as his Funko compatriots.  Hasbro clearly knows the market they want to tap into.  Old Mighty/Mini Muggs had three points of articulation, at the neck and shoulders.  These new Muggs lose the neck joint, for reasons I’ll get into in a little bit.  Luke can still move at the shoulders, though, which I’m happy about.  The proportions of the new Mugg body are similar in a lot of ways to the original, but with a definite influence from the figures that have come since.  The main body is a bit squatter, and the head is larger in comparison.  I actually find these changes to be quite aesthetically pleasing.  Another change in this new incarnation is just how unique each figure is.  Old Mighty Muggs would deviate from the base body as little as possible, resulting in a very large number of figures that were sculpturally identical.  If Luke is any indication, that won’t be true this time.  He gets a unique hair piece, as well as a slightly tweaked right arm, holding his trusty lightsaber.  Once again, the changes are things I really don’t mind, and in the case of the hair, it was a direction Hasbro was already starting to experiment with at the end of the original line.  Another change in direction?  An action feature.  Mighty Muggs weren’t entirely without action features before, but they were far from the norm.  This time it’s standard.  Luke has three different facial expressions, made visible by pushing down on his hair.  It’s this feature that robs Luke of his neck movement.  Personally, I don’t mind, but I suppose an argument could be made that a non-mechanical rotation would have preserved the articulation.  Of course, then Hasbro wouldn’t have the gimmick to set them apart from the competition, so maybe that wouldn’t have been so great.  The paint is definitely where this guy really shines, and it mostly comes from those three expressions.  He’s got a standard determined stare, a grin, and an angry screaming one.  I like how they’re all three clearly the same guy, but still very distinctly different and incredibly expressive.  Very definitely the highlight of the figure.

THE ME HALF OF THE EQUATION

While I didn’t have a huge collection or anything, I was definitely a fan of Mighty Muggs back in the day (at least in part via Christian, who had a larger collection than I).  I was a bit sad when they went away, and I always preferred them to Pops.  When I heard they were coming back, I was quite excited, and I was even more exited when I found them at my local TRU.  I came very close to buying a whole set of the Star Wars ones, but decided to try the line out with one, and went for Luke who I thought looked the coolest.  I’m very happy with my purchase, and I can definitely see myself grabbing more of these.  Here’s hoping they take off!

#1497: Han Solo – Smuggler

Posted by Ethan Wilson in Reviews and tagged with , , , ,

HAN SOLO – SMUGGLER

STAR WARS: 30TH ANNIVERSARY COLLECTION (HASBRO)

“A scoundrel through and through, Han Solo nonetheless adheres to a deep sense of right and wrong. He couldn’t leave his new friends behind to what he felt was certain death. Though some might call his arrival at the Battle of Yavin late, he prefers to say that he was ‘just in time.’”

2017 marked the 40th anniversary of A New Hope’s release, and thus the 40th anniversary of the Star Wars franchise as a whole.  Hasbro had a few commemorative releases, mostly to do with the Black Series, but it was notably smaller than the last big anniversary celebration they ran, back during the 30th Anniversary.  For that one, there were several different assortments running, with coverage of all six of the franchise’s films.  There were some new additions offered, but there were also more than a few variants of the main players.  There were three versions of Han Solo offered, and today I’ll be looking at the first of those three!

THE FIGURE ITSELF

Han was released in the second wave of the Star Wars: 30th Anniversary Collection, which was based around the Battle of Yavin from the end of the first movie.  The whole assortment had initially been planned for release in 2006, but ended up pushed back to 2007.  Han was figure 11 out of 60 total figures in the 30th Anniversary Collection, and is based on Han’s fully kitted out look seen both when he uses the gunner turret during the Death Star escape and when he swoops in to save Luke from Vader during the trench run.  The figure stands just shy of 4 inches tall and he has 16 points of articulation.  After the introduction of the Vintage Original Trilogy Collection in 2004, Hasbro was beginning to experiment with more fully articulating the basic figures, and Han followed this trend.  This was partly out of convenience, as this figure was built on the VOTC Han’s base, and therefore inherited a lot of his articulation.  To facilitate the slightly different look of this particular Han design, the figure gets a new head and arms.  The head adds Han’s headset, which connects to his belt at the back.  I find the head has one of the better Ford likeness at this scale (especially for the time) and headsets just make everything cooler, am I right? (Fun Fact: the headsets used by Han and Luke in A New Hope are the same model used by the Nostromo’s crew in Alien and the Colonial Marines in Aliens.)  The new arms remove the hinge/swivel elbows of the VOTC figure for the slightly cheaper to produce angled swivel joints.  They aren’t quite as useful, but they pose well enough if you’re creative with them, and they’re pretty well hidden by the sculpt.  He also has new hands, sporting the gloves Han wears wile piloting the Falcon.  I’ve always liked the gloved look, so I was happy to see it show up here.  Han’s paintwork is pretty decent overall, with very clean application with little bleed over or slop.  His pants are a slightly brighter blue than they really should be, but that’s pretty minor.  The gloves are also usually seen with more of a yellowish hue to them, but I think the differences here can be written off as variations in lighting.  Han was packed with his trusty DL-44 heavy blaster pistol, which he can hold in either hand or stow in his holster.  He also included a 30th Anniversary Collection coin, which I foolishly threw into my bin of unnecessary extras before I got a picture.  Silly Ethan.

THE ME HALF OF THE EQUATION

I wasn’t really collecting Star Wars figures at the time of the 30th Anniversary Collection, so I didn’t get this guy new.  In fact, my first knowledge of this figure’s existence was seeing him re-packed with the huge 2008 Millennium Falcon release.  I thought he looked pretty cool, but not cool enough to drop $160 for the Falcon (what a fool I was!).  Ultimately, I ended up getting this guy about a month or so ago, during Lost In Time’s grand opening sale.  All the basic Star Wars figures were marked down, and he just looked cool.  He’s a pretty sweet figure, and one of the better Hans I own.  It makes me a little sad that the Black Series figure didn’t include an extra head with the headset.

***SHAMELESS PLUG TIME!***

Hey FiQ-fans, do you enjoy reading my incessant ramblings about Star Wars toys?  If so, you should totally check out A More Civilized Age: Exploring the Star Wars Expanded Universe, which features an essay about the history of Star Wars action figures, written by yours truly!  And if that’s not enough for you, there’s another 18 essays discussing the Expanded Universe, (including one written by my dad Steven H. Wilson) as well as a foreward by Star Wars Novelist Timothy Zahn.  I’m very excited about it, so please check it out here.

#1492: Darth Vader

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

DARTH VADER

STAR WARS: THE BLACK SERIES

“Once a heroic Jedi Knight, Darth Vader was seduced by the dark side of the Force, became a Sith Lord, and led the Empire’s eradication of the Jedi Order. He remained in service of the Emperor for decades, enforcing his Master’s will and seeking to crush the fledgling Rebel Alliance.”

When Star Wars: The Black Series first launched, Hasbro deliberately spaced out the heavy hitters, over the first year or so of the line.  Perhaps most noticeably affected by this was franchise icon Darth Vader, who didn’t officially join the line until five series in, well into its second year.  Hasbro presumably wanted to wait until they had the rhythms of the line down before tackling one of the most recognizable villains of all time.  Unfortunately, The Black Series had something of a downward curve of quality in its first couple of years, and poor Vader was left with a passable, but far from perfect figure.  Nevertheless, he’s Darth Vader, so the figure was one of the line’s strongest sellers, providing a scarce, expensive, and ultimately very disappointing experience for most collectors.  Fortunately, Hasbro took advantage of Vader’s re-appearance in Rogue One, as well as the original film’s 40th anniversary, to give fans another shot at the dark lord.

THE FIGURE ITSELF

This new Vader figure was available two ways.  The first was as part of the 40th Anniversary Legacy Pack, released early this summer, which included Vader carded in the same faux-vintage fashion as the rest of the 40th Anniversary Collection, packed alongside a display stand mimicking the materials included in the original Kenner Early Bird pack.  He was then re-released as figure 43 in the main Black Series line, as part of the first The Last Jedi-themed assortment.  There are some minor differences between the two, but they’re functionally the same.  This Vader differentiates himself from the last Black Series Vader by taking his basis from the A New Hope Vader design.  I like this, because it’s functionally the same design, but it means that the fans who have the old Vader still have a reason to own both.  The figure stands about 6 1/2 inches tall (the same as the old one) and he has 26 points of articulation (also the same).  He too uses a mixed media approach to the design, with plastic for the overall body, and then a cloth cape and robes.  This is dangerous territory, as bad cloth parts have been the downfall of more than one Black Series figure.  In this case, it seems to have worked out alright, though.  The pieces could still be a little tighter, but he’s not swimming in an XXL T-Shirt like the last figure.  The all-new sculpt fixes a few of the problems of the prior, most notably, the shaping of the helmet.  Since he never took off his helmet in ANH, this helmet’s a solid, non-removable piece, which makes for a more precise and accurate take on Vader’s distinctive mask.  I don’t know that I like this piece quite as much as the smaller Rogue One figure, but it’s certainly a marked improvement on the original figure.  His paintwork is generally pretty decent.  It’s nothing terribly complex, but there’s some nice, subtle variations in the various finishes which offer some nice depth.  Regardless of which release of this Vader you get, they both include his usual lightsaber, which appears to be the same piece that was included with the last figure.

THE ME HALF OF THE EQUATION

When this figure’s digital sculpt was first shown off, I was pretty pumped.  I was more than a little let-down by the old one, and a replacement was high on my list of wants.  When he finally hit stores, I was focussed on other things, and just had a hard time justifying his higher price-point, no matter how cool that stand may be.  Ultimately, I ended up getting him because I found one at 2nd Avenue for $3.  I can’t say for sure which release I got, but I’m happy I finally got one.  With all that said, in digging out the old figure for the comparison shots, I realized I was perhaps a little harsh on that one, and he isn’t as bad as I’d remembered.  Now I really don’t know which one I prefer.

#1476: Obi-Wan Kenobi

Posted by Ethan Wilson in Reviews and tagged with , , , ,

OBI-WAN KENOBI

STAR WARS: THE LAST JEDI (HASBRO)

Obi-Wan Kenobi…now that’s a name I haven’t heard in quite some time…  Or at  least not for about 11 months, since that’s the last time I reviewed an Obi-Wan figure.  A year’s “quite some time,” right?  That’s my story and I’m sticking with it.  Anyway, even 50 years after his demise at the hands of Darth Vader, Kenobi’s still getting new action figures, which seems like a pretty sweet deal if you can get it.  Today, I’m looking at the newest of those figures!

THE FIGURE ITSELF

Obi-Wan is one of two refresher case figures in Hasbro’s first series of The Last Jedi figures.  He and Yoda (the other refresher figure) are shipping in refreshment cases of the Teal Wave of Series 1, and they started showing up most places last month.  This Kenobi figure represents the Alec Guinness version of the character from A New Hope, which is certainly my favorite.  The figure is about 4 inches tall and he has 5 points of articulation.  He’s got an all-new sculpt, though parts of it, the head at the very least, appear to come from the same files as the Black Series figure.  In the case of the head, that’s definitely a good thing, since it means he’s on par with the earlier figure in terms of the likeness.  It’s a spot-on Guinness, no doubt.  The rest of the sculpt is pretty solid as well; the robes on the body are pretty similar in design to those of the Jedi Master Luke, right down to the way the articulation cuts through them.  The arms go with a slightly different style than most of the figures in this line.  They’re bent at the elbows and the articulation at the shoulders is cut at a slight angle.  The end result is that if you get the posing right, he can actually hold his lightsaber two-handed, which is a first for a basic series figure, at least for a good long while.  I dig it.  Kenobi’s robe is a separate, soft plastic piece.  The hood’s sculpted to be permanently up, but you can fold it inside out for an approximation of his hood down look.  I don’t mind the hood up, but I certainly won’t be surprised if this mold shows back up with a tweaked robe piece down the line.  The paint work on Obi-Wan is fairly basic, but certainly passable.  The application is all pretty clean, and the colors all match up pretty well with the on-screen look.  Obi-Wan was packed with his lightsaber, and also features the Force Link feature.  When placed up to the reader, you hear him say: “Obi-Wan Kenobi…,” “Run, Luke, Run!,” and there are a bunch of lightsaber sounds.

THE ME HALF OF THE EQUATION

Obi-Wan was a fairly recent purchase.  I got him from Toys R Us, at the same time as the Dark Phoenix two-pack, in fact.  I don’t have a ton of Guinness Kenobis, and I rather liked the look of this one, so I grabbed him.  He’s actually pretty solid, and another fantastic addition to an already awesome line.

#1290: Princess Leia Organa

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

PRINCESS LEIA ORGANA

STAR WARS: THE BLACK SERIES

“Princess Leia Organa was one of the Rebel Alliance’s greatest leaders, fearless on the battlefield and dedicated to ending the tyranny of the Empire.”

May the 4th be with you!  Yes, it’s May 4th again, known to geeks all over the world as Star Wars Day.  This year’s Star Wars Day is extra special, since this year marks to 40th anniversary of the release of the original movie.  I had initially planned to review another vintage figure today, but as luck would have it, I got a newer item that I wanted to slot into the schedule as quickly as possible.  So, without further ado, here’s Princess Leia Organa!

THE FIGURE IN QUESTION

Princess Leia was released as part of the first series of the special 40th Anniversary sub-set of Hasbro’s Star Wars: The Black Series.  All of the figures in the first series are re-releases of prior Black Series figures, but this time on special commemorative cards patterned after the vintage Kenner hardbacks of old.  The packaging is super nifty, and I was almost a little sad to have to open it up to take her out.  Leia is a re-release of the #30 Black Series figure released last year.  Unlike the others in this set, she’s actually got a slight tweak from her predecessor.  The initial head for the #30 figure was deemed unsatisfactory by Hasbro.  However, they were too late in production to completely replace it, so the initial shipments went out with the initial sculpt.  There was talk of a running change to replace the head, but I’m not actually sure if they ever made it out.  This release is making use of the new head from the start.  The figure stands 5 inches tall and has 29 points of articulation.  Like Luke and Obi-Wan before her, Leia makes use of a mix of sculpted and cloth parts.  The head, boots, and underlying body are all sculpted, and the dress and hood are a tailored piece, held in place by a sculpted belt piece.  In terms of the sculpted parts, the general work is pretty solid.  The head is, as noted, the improved piece.  It’s really quite a nice piece of work; easily one of the better Carrie Fisher likeness out there.  It’s leaps and bounds beyond the prior piece, and I personally think its a closer likeness than the Boushh disguise Leia, which was my personal favorite prior to this.  The underlying body sculpt is decent enough; it’s not really meant to be seen, so the proportions are more on the marionette side of things.  I do wish some of the joints offered a little more range, but other than that, it seems fine.  The boots are a pretty decent sculpt, and make for a pretty decent replica of the actual costume pieces.  They aren’t going to to be seen much, but the attention to detail is appreciated.  The cloth pieces on the Black Series figures have never been one of Hasbro’s strong suits.  I was particularly letdown by how the shirt turned out on the ANH Luke figure.  So, I was definitely apprehensive of how the dress would turn out here.  While I think I still would have preferred a sculpted dress, I’m happy to say the cloth dress is better than I was expecting.  It seems to be less ill-fitting than prior pieces, and sits on the figure rather nicely.  It’s not without issue, mind you.  The seams on the sleeves are rather annoying, and the hood is just sort of a mess.  It doesn’t really want to say up or down; I think sewing it in place would have been a better idea.  The belt piece holds the whole thing together nicely, and adds just the right folds.  It also doesn’t seem to ride up as much as Luke’s did, which is a serious plus!  I’ve been a little letdown by some of the Black Series paint as of late, but Leia actually turned out really well.  Her head gets the majority of the work.  It’s all pretty clean, and I was pleasantly surprised by the slight accent work on her face, which adds some extra color and brings some much needed life to the figure.  Here’s hoping that this style of paintwork continues!  Leia is packed with two blasters: the smaller one she carries during her opening scene and the larger Stormtrooper blaster she’s hauling around during the escape from the Deathstar.  I really appreciate the variety.  Of course the fact that she got both guns only further hammers home how annoying it was that Luke didn’t get any of his Stormtrooper gear, since both Han and Leia did.  Oh well.

THE ME HALF OF THE EQUATION

I never did see the first release of this figure at retail (In fact, the only figure I did see was the Obi-Wan figure that I bought).  So, I was pretty happy to hear about the re-release, since I didn’t want my A New Hope set stuck without a major player.  I ended up finding this figure at the nearby comic book store, Power Comics, while Super Awesome Girlfriend was picking up last week’s comics haul.  I was going to wait to grab her, but Super Awesome Girlfriend insisted on buying her for me, because that’s what she does.  For once, I’m glad I had to wait for a figure, because this release is definitely superior to the prior figure.  The end result is a figure I’m really happy with.  She was definitely a pleasant surprise.  Here’s to more awesome Leia figures in the future!

#1165: Obi-Wan Kenobi

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

OBI-WAN KENOBI

STAR WARS: THE BLACK SERIES

obiwan1

When Star Wars: The Black Series first starting to hit, I made up a list of figures I really wanted to see released, entirely made up of Original Trilogy characters.  As the line progressed, a lot of those figures found their way into release.  In series three, I hit my first real breaking point with the announcement of Obi-Wan Kenobi.  Rather than the OT, Alec Guinness version that most fans were hoping for, we got the Episode III version of the character.  The fact that it wasn’t the version most people wanted, coupled with the general weak quality of the final product made him one of the line’s longest lasting peg warmers (the fact that he was subsequently re-packed just a few series after his initial release didn’t help matters).  Without much effort, you can probably still find him in some retail stores, almost four years after his release.  That doesn’t really make a good case for releasing another version of the character, no matter how fan demanded it may be.  Fortunately, Hasbro wasn’t too deterred, and we’ve finally gotten a proper Alec Guinness Kenobi, which I’ll be looking at today.

THE FIGURE ITSELF

obiwan2Obi-Wan was released in the fifth series of the Rogue One-themed Star Wars: The Black Series figures.  He’s figure 32 in the line, which places him around the middle of this six-figure series numerically.  Obi-Wan was also one of the three summer convention exclusive Black Series figures for 2016, where he included an extra holographic Princess Leia accessory, but apart from that, the two releases are pretty much the same.  The figure stands about 6 1/2 inches tall and has 27 points of articulation.  Like a lot of figures in this particular line, Obi-Wan is a mix of sculpted and tailored elements.  He’s mostly sculpted, with just the robe being cloth.  Cloth robes are nothing new, and Obi-Wan’s works pretty well, actually.  The rest of the figure is an all-new sculpt, which is probably one of Hasbro’s strongest Black Series sculpts to date.  In particular, the head sculpt is a very good recreation of Guinness’ likeness.  There have been some decent likenesses in this line before, but I think this is the best one they’ve ever done.  Heck, it’s just one of Hasbro’s best head sculpts period.  I really like it.  The rest of the sculpt, while not being quite as “wow” as the head, is still quite solid, and definitely translates his movie design into action figure form quite nicely.  Even the paintwork on this guy is pretty solid.  Everything is nice and clean, and the head has a lot of nice variance in the shading (it’s still a bit too blonde, but seems less off than Han and Krennic).  I wouldn’t have minded a bit of weathering on the robes, but they don’t look awful.  My one complaint about this figure has to do with the included extra.  He just includes his lightsaber, which is a perfectly fine extra, and is even quite nicely done.  The problem I ran into is that my Kenobi’s saber blade broke off, which is quite annoying.

THE ME HALF OF THE EQUATION

I was anticipating finding this guy would be difficult, but it actually wasn’t.  I found him at the Gamestop outside of Super Awesome Girlfriend’s hometown, just mixed in with the Force Awakens and Rogue One figures.  I actually wasn’t going to get him (it was right before Christmas and my budget was a bit tight), but Super Awesome Girlfriend refused to let me leave him there and ended up buying him for me.  I’m really happy to have this guy, and he’s easily one of my favorite entries in this line.  After being rather letdown by the Tatooine Luke, this guy was a nice pick-me-up.  Here’s to more like him!

#1065: Luke Skywalker

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

LUKE SKYWALKER

STAR WARS: THE BLACK SERIES

lukefarmboy2

Luke Skywalker is kind of the bread and butter of Star Wars: The Black Series.  He’s by far the most recurrent individual character in the line, and is thus far the only character with at least one look from each of the Original Trilogy films covered.  He’s already had two figures from A New Hope, in both his X-Wing pilot gear and his Stormtrooper disguise.  However, his main look from the film was still left unreleased.  Fortunately, Hasbro’s made sure that one of Luke’s most definitive looks didn’t get left out, and Tattooine Luke started hitting shelves over the summer.  I’ll be taking a look at him today.

THE FIGURE ITSELF

lukefarmboy1Luke was released in the sixth series of the third iteration of Star Wars: The Black Series (i.e. the one launched with the Force Awakens product).  He’s #21 in the line (not that the numbers actually mean anything, of course, since Hasbro keeps restarting the counter), and he’s the first Original Trilogy figure to be released since the switch to Force Awakens product.  The figure stands just shy of 6 inches tall and has 29 points of articulation.  As you can probably tell from the pictures, Luke is constructed from a mix of sculpted elements and soft goods.  Pretty much, the underlying body forgoes the shirt, the shirt is cloth, and it’s held in place by a rubber belt.  The basic sculpt is decent enough, though not without its flaws.  The legs and boots are both very nicely detailed and textured, and there is a fully sculpted body under the cloth shirt.  However, the upper body feels somewhat under scaled compared to the legs.  The shoulders feel too narrow and the arms just a bit too short to be accurate.  Rather than re-use the X-Wing Luke head (as was done with the Stormtrooper Luke), this figure gets an all new sculpt.  It’s okay, but is noticeably smaller than the last sculpt, and does not possess as strong a likeness.  The cloth shirt is okay for what it is, but the problem really lies with “what it is.”  The choice to make the shirt a separate piece is somewhat odd.  While it’s not the first time Hasbro has done such a thing with this design, it’s never really worked before, and doesn’t really work here.  Where a sculpted piece could have captured the texture and specific shaping of Luke’s shirt in the movie, the cloth piece is too clean, too simple, and really just hangs there in a rather unconvincing fashion.  The worst thing is that, like Darth Vader before him, the cloth pieces just aren’t tailored correctly to the body, which results in his tunic continuing way too far down his legs, making it look more like a robe than it should.  It’s definitely disappointing.  Luke continues the trend of lessened paint apps on The Black Series figures, sporting only the most basic detailing.  It’s clean, well applied, and well matched to the source material, but it lacks some of the life of earlier figures.  Luke is packed with his lightsaber and a pair of binoculars, both of which can be hung on his belt.  It might have been nice to get a Stormtrooper belt and blaster, since the belt is already removable and it would allow him to match with the Series 2 Han Solo, but I guess Luke being an all-new sculpt made such extras cost prohibitive.

THE ME HALF OF THE EQUATION

I found Luke here at the Walmart near where my family vacations.  Wasn’t really looking for him or anything, just killing time on my way there, but there he was.  I was actually pretty excited to find him, since I haven’t gotten a new Black Series figure in what seems like forever.  That being said, I can’t help but feel a little let down by this guy.  He’s not awful or anything, but he’s not the slam dunk he should have been.  Rather than being THE Luke to own, he’s just another figure in the pack.  X-Wing Luke will continue on as my go-to figure for display purposes.