Tag Archives: All Time Toys

#3551: Marrok

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

MARROK

STAR WARS: RETRO COLLECTION (HASBRO)

Fun FiQ Fact #0030: Marrok is our fourth Inquisitor in the Retro Collection line-up.  Sure, he may be lapsed, but it counts!

Can you be just a pretty face if no one’s actually seen your face?  Because I feel like that’s kind of what Marrok’s deal is.  Not that it’s a bad thing.  This is Star Wars, after all.  Looking cool is, like, thing number one!  I personally really like Marrok’s brand of cool, so, despite his more minor role in Ahsoka, I still am all about the Marrok figures.  I looked at his Black Series figure already, but here’s his representation on the smaller side!

THE FIGURE ITSELF

Marrok is the second figure in the Ahsoka-tie-in assortment of Star Wars: Retro Collection.  The character had a lot of presence in early marketing for the show, so his inclusion is a pretty sensible one.  The figure stands 3 3/4 inches tall and he has 5 points of articulation.  He’s sporting an all-new sculpt, and it’s honestly one of my favorites that this sub-line has put out.  It does a really good job of translating Marrok’s on-screen design into the vintage Kenner style.  It keeps all of the important elements, while also simplifying enough to make him fit in with the rest of the line.  It makes for a very sleek, really fun look, and plays into the whole “black knight” angle so nicely.  Like the larger figure, he’s topped off with a cloth cape piece.  Like the rest of the figure, this piece fits the vintage aesthetic very nicely, and it goes on and off very easily.  Marrok’s color work has been dialed back a bit, going for a more drastically contrasting shade between the undersuit and the armor, which is more of a gunmetal grey finish here.    Marrok is packed with an Inquisitor-style saber, which appears to be the same piece used for Reva in the Kenobi set.

THE ME REMAINDER OF THE EQUATION

I dug Marrok’s design a lot, and he was definitely nearer the top of my list.  He’s a ton of fun, and I very definitely dig him.  He’s a good design that makes for a very good figure, and he’s just a great example of when Retro Collection just really works.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3550: MJ

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

MJ

MARVEL LEGENDS (HASBRO)

Fun FiQ Fact #0029: This marks the first time since the the tie-in assortment for Spider-Man 3 that an MJ figure has been released on her own and not as part of some sort of multi-pack.

Now that most of the uproar regarding Zendaya’s casting in the role of MJ for Homecoming has pretty much disappeared, we can sit back and recognized that she actually did a pretty good job in the role.  Her MJ was certainly different from the comics one in terms of general characterization, but honestly, so was Kirsten Dunst’s Mary Jane in the Raimi films.  Changing up MJ is just something the movies like to do.  With her even further expanded role in No Way Home, MJ’s gotten her second Legends figure for the MCU, and I’m looking at that today!

THE FIGURE ITSELF

MJ is part of the retro-card-sporting No Way Home tie-in assortment for Marvel Legends.  She’s specifically based on her appearance in the third film, narrowing in on the attire she wears for most of the movie, but most specifically, it’s the outfit she has in the big final battle.  It’s a little more in line with her character, I feel, than the jacketed look we got on the two-pack release.  The figure stands just over 6 inches tall and she has 27 points of articulation.  Articulation is rather restricted here, especially on the torso, but given MJ’s generally more non-action set-up, it’s not as limiting for her.  She’s using the same legs as her last figure, but everything else is new.  The sculpt’s a pretty good one.  I definitely feel that they’ve gotten a better likeness for Zendaya this time around (not that the last two were *bad*) and I like that the sweater look manages to be the right amount of loose, without winding up looking too bulky.  The color work here is a nice set-up.  There’s printing for the face, which looks fairly realistic, and is an improvement on the last figure.  I also quite like the striping on the sweater, and its general color is just a bit more exciting than the more muted palette of the last figure.  MJ is packed with two sets of hands (in fists and relaxed), as well as the box containing Strange’s original spell.  In a rather amusing turn of events, after the two-pack figure had a gripping hand and nothing to hold, this one has something to hold and no actual gripping hand.  You can fudge it with one of the relaxed hands, but it’s not quite there.

THE ME REMAINDER OF THE EQUATION

The last MJ figure served me fine for my collection, but she looked a little out of place once we got the updated Peter and Ned last year.  Now I feel like I have an MJ that fits in better, and she’s wearing a slightly more in-character outfit as well.  She’s a basic figure of a rather average look, but she does most of what she needs to well.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3548: Amazing Spider-Man

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

AMAZING SPIDER-MAN

MARVEL LEGENDS (HASBRO)

Fun FiQ Fact #0027: The Marvel Legends assortment that contained tie-in figures for Amazing Spider–Man 2 was one of two that launched Hasbro’s modern era of Legends 10 years ago.

I was pretty staunchly anti the Amazing Spider-Man series when it first hit theaters. Raimi’s films had defined my love of the character, and I was bitter about him being ousted, so I avoided them both in theaters. I did eventually see them both, and I could see some of the potential behind them, but never the full payoff. So, when I say that Andrew Garfield’s return as Peter Parker in No Way Home was one of my favorite parts, I want you to understand the weight behind that. And hey, it got me to review something Amazing Spider-Man related!

THE FIGURE ITSELF

Amazing Spider-Man is part of the retro-card style No Way Home tie-in assortment of Marvel Legends. Or is he? Despite shipping in a case with five other figures all on No Way Home cards, Andrew is on an Amazing Spider-Man 2 card. Why? Well, the exact reason hasn’t been stated officially, but we know that the Figuarts NWH Andrew, which had an unmasked Garfield head when solicited, had to have said unmasked head removed at the last minute, with contract issues being cited. Hot Toys’ Andrew Spidey, despite being shown off with other NWH figures was ultimately marked Amazing Spider-Man 2 upon release as well, and Hasbro’s original three-pack release for him under the NWH banner was sold without an unmasked head, suggesting that there’s some sort of hang-up with specifically Andrew’s likeness from NWH. Thankfully, he’s not all that different looking between the two films, so it’s easy enough to just mark him as being the other version without any real change-ups. Much like the Tobey figure, Andrew’s core figure is identical to his three-pack release, with only accessory change-ups. The figure stands a little over 6 1/4 inches tall (making him, accurately, the tallest of the three Spideys) and he has 34 points of articulation. His articulation set-up is the same as Tobey and Tom’s, but I personally found Andrew had the best range of motion. It’s still a little restricted, but not terribly so. His sculpt is all-new, and wow is it an overhaul to the one from 2014. That one was a good basic Spidey, but this one is more specifically tailored to the actual movie costume design. Say what you will about the films, this suit design is one of the best Spidey looks out there and it translates well to this figure. While I felt rather let-down by the paint on Tobey, the paint on this guy is particularly good. I dig the darker tones and the slight metallic finish, which really capture his on-screen look well. The three pack have this guy three sets of hands (thwipping, open gesture, and fists) and a webline. The single drops one gesture and one fist, as well as the webline, and gives him an unmasked head. The extra head is a pretty solid likeness, and feels more on point than the Tobey sculpt, but maybe not as nice as the Tom sculpt.

THE ME HALF OF THE EQUATION

As sort of the dark horse performance in the movie for me, I was definitely down for a new Andrew Spidey. While Tobey’s my favorite of the three for sentimental reasons, I think Andrew is the best Spidey figure in this particular set. It’s nice to see him get his due both in toy and movie form.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3547: Batman Beyond

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BATMAN BEYOND

DC UNIVERSE CLASSICS (MATTEL)

FiQ Fun Fact #0026:  While he started as a purely animated character, Batman Beyond has had 12 different non-animation based figures.

DC Universe Classics launched with a lot of weirdness when it came to distribution, and not helping things early on was the closure of KB Toys, one of the few stores consistently carrying the line’s earliest assortments.  Their closure coincided with the fourth series of the line, a fact I vividly recall because they were actually amongst the very last things I bought from KB.  Well, most of them, anyway.  There was one figure I missed, largely because he was far and away the most popular figure in the set.  And that figure?  Batman Beyond.

THE FIGURE ITSELF

Batman Beyond is part of the aforementioned Series 4 line-up of DC Universe Classics.  There were actually two different versions of the figure available, a standard and a KB Toys-exclusive unmasked release.  The standard was also meant to get a re-release under the planned DC Universe All-Stars line, but that was scrapped when All-Stars was rejected by retailers.  So, just the one release on this guy.  The figure stands 6 1/2 inches tall and he has 23 points of articulation.  He’s based on the medium-sided male body, which honestly seems a bit too large for Terry, who was just a teenager most of the times we saw him.  At this point in the line, however, the only smaller body was the one used for Sinestro, which would have made him really short as well, so they just did the best they could, I suppose.  Admittedly, the whole line seemed a little bulked up relative to their usual looks, so it wound up being more a stylistic change-up than anything.  Terry got a new head, forearms, and belt piece.  They all match-up well enough with the base body pieces, and make for pretty decent “real world” takes on the Batman Beyond design.  It keeps the design fairly clean, which I definitely like, especially compared to other realistic updates to the look.  The color work on this figure is pretty cool.  They opted to make the black a glossy finish, which is a different choice, but one that very definitely works for the figure.  It makes him really pop out from the rest of the series, when he could otherwise get lost in the crowd.  Batman Beyond was packed with a single batarang, and the arm to the Despero Collect-N-Connect.  The batarang is an okay sculpt, but is for some reason silver.  I get not having the budget to do multi-colors, but either red or black would have made more sense, I feel.

THE ME REMAINDER OF THE EQUATION

Back when KB was going out of business, I got the full set of these minus Terry.  I tried and tried, but one never made its way to me, so I just made due with my DC Direct Superman/Batman figure for a while.  In the mean time, I’ve been constantly searching for the perfect Batman Beyond for my collection, and I’ve just kept coming up shy on every figure.  Sometimes, you just have to go back to the beginning, I guess.  I finally got ahold of a loose one recently, and, well, here he is.  He’s a pretty by the numbers DCUC figure, but I honestly really like by the numbers DCUC figures.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3546: Ahsoka Tano

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

AHSOKA TANO

STAR WARS: RETRO COLLECTION (HASBRO)

Fun FiQ Fact #0029:  This is the fourth time an Ahsoka figure has been justified as a separate release due to the addition of a poncho.

Do you ever feel like you’re seeing double?  Well, okay, like, double, but with a poncho?  Is that a normal thing?  No.  Ah, well.  The point is, hey, here’s this additional Ahsoka figure.  She’s real similar to another one I already looked at.  Wanna read a review of it?  I mean, you’re here, so I assume you probably do.  But, you know what they say about assumptions….they make an Ahsoka out of you and mption?  No, that’s not right.  Ah, well.

THE FIGURE ITSELF

Ahsoka Tano is the first figure in the Ahsoka-tie-in assortment of Star Wars: Retro Collection.  I mean, I suppose that tracks.  Gotta have the title character.  She’s based on her poncho-wearing look, which debuted over in The Mandalorian, and made a return for her own show.  The figure is just under 3 3/4 inches tall and she has 5 points of articulation.  This figure’s sculpt is the exact same one as the last Retro Collection Ahsoka because she’s just that one with a poncho as noted before.  It looks as good here as it did the first time around.  The paint work is the same basic layout as the prior release as well.  It seems a touch sharper on my copy than the prior figure, but that could just be a case by case thing.  Ahsoka is packed with the same two lightsabers as the last figure, as well as the poncho, noted many times previously here in this review of the poncho-wearing Ahsoka.  It’s a nice piece, and definitely feels in the style of vintage Kenner figures.  It also does change-up the look pretty sufficiently.

THE ME REMAINDER OF THE EQUATION

I was pretty content with the first Ahsoka, so I wasn’t sure I needed this one at first, but I wanted the rest of the set, and it didn’t make much sense to skip just one figure.  I wasn’t expecting much, but I actually really like the figure’s general look, and the poncho is a fun extra.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3545: Friendly Neighborhood Spider-Man

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

FRIENDLY NEIGHBORHOOD SPIDER-MAN

MARVEL LEGENDS (HASBRO)

Fun FiQ Fact #0024: Delays in the production of the original Spider-Man movie meant its tie-in line had to be shelved, leading Toy Biz to create Spider-Man Classics to fill the gap, ultimately leading to the creation of Marvel Legends.

Sam Raimi’s Spider-Man was a pretty big deal for superhero movies, and proved perhaps the most influential film since Superman The Movie it terms of how the industry treated comic book movies. Though certainly a product of its time, without Spider-Man, there’s not really an MCU. So, it was certainly appropriate for Tobey Maguire’s Peter Parker to show up in No Way Home, officially crossing over into the very universe he indirectly helped create. It was also really cool for me, because, much as I love Tom Holland in the role, Tobey Maguire is *my* Spider-Man. I saw all of his movies in the theater, and I loved them all (yes, even Spider-Man 3). A lot of my attachment to Spider-Man at all comes from those movies. And getting new toys based on the characters from them, especially Tobey as Spidey? Just kind of the best.

THE FIGURE ITSELF

Friendly Neighborhood Spider-Man is part of the retro-card backed No Way Home tie-in assortment of Marvel Legends. Previously, he was available in a Pulse-exclusive three-pack with Tom and Andrew. The two releases are identical core figures, with different accessories, which I’ll touch on in that section.  The figure stands just shy of 6 1/4 inches tall and he has 34 points of articulation.  His articulation scheme is pretty much the same as the Finale Tom figure, so it’s a slightly more restricted version of the Amazing Fantasy set-up.  It’s still a little stiff, but generally not bad.  Tobey’s sculpt is an all-new one (shared with the three-pack, of course), courtesy of sculptor Dennis Chan.  While he’s billed as specifically No Way Home Tobey, the sculpt goes for a little more middle of the road for all of his movie looks.  The masked head isn’t quite a spot-on recreation of his mask from the movies; the shaping of the eyes and the layout of the webs looks right, but the underlying shape of the head is off.  It’s not terrible, but it’s not quite right.  Admittedly, it was an issue on his figures from during his movie run too, with the super poseable figure from Spider-Man 2 being another prominent offender.  The head also seems maybe a bit large relative to the body.  The body sculpt’s pretty nice, though, and has a nice set of proportions, far more balanced than prior figures.  The paint work on this guy is another area that doesn’t quite hit the mark.  It’s not bad, but the colors seem a little too bright and saturated to properly convey Tobey’s suit.  It results in the weblines in particular getting a little lost.  The application’s still clean, though, so it’s less a technical issue, and more a design choice one.  The three-pack version of Tobey got three sets of hands (in fists, open gesture, and thwipping) and a webline.  For this release, he gains an unmasked head sculpt (handled by Daniel Salas), but loses the webline, the right open gesture hand, and the left fist.  It’s a bummer that we lost one each of the non-thwipping hands, since they were already sculpted and all.  The unmasked head is okay; something seems off about it.  It’s hard to tell which Tobey it’s supposed to be, and it looks more like Tyler Hochlin than Tobey Maguire to me.  Still, it’s not the worst likeness I’ve seen in this line.

THE ME REMAINDER OF THE EQUATION

Tobey’s return was the thing I was most excited about in No Way Home, and I definitely wanted a figure of some sort.  I actually managed to get a good deal on the three-pack version *right* before the singles got announced, so I’ve have the figure for a bit and opted to upgrade to the single when he finally hit.  This figure’s not perfect.  In fact, I’d say he’s the weakest of the three Spideys in this line-up.  But, I can’t help but love him, and I’m happy to have gotten him.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3543: Spider-Man

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

SPIDER-MAN

MARVEL LEGENDS (HASBRO)

Fun FiQ Fact #0022:  Tom Holland’s Spider-Man is one of the few core MCU characters to have all of their costumes covered in Legends form, starting with his homemade suit and ending with his…other homemade suit.

The MCU Spidey suits have certainly had their ups and downs.  The original Civil War design is a pretty nifty MCU-ification of his classic costume.  Iron Spider grew on me, but wasn’t a basic look.  I was actually a pretty big fan of the advanced suit from Far From Home, because I’m a sucker for the red and black set-up.  I wasn’t so much up on its upgrade to the Integrated suit for No Way Home, but there have certainly been worse designs.  It just was unfortunate that Holland wasn’t wearing one of his best looks when he teamed up with Garfield and McGuire, who were in their best looks.  Thankfully, he moved onto his best look yet (which is admittedly just a pretty straight recreation of his classic comics look) for the film’s final swing.  It’s been late to the merchandising game, but so has everything else good from the movie.

THE FIGURE ITSELF

Spider-Man, who is just called “Spider-Man” on the box, is part of the second No Way Home-themed tie-in assortment of Marvel Legends, which hit right at the tail end of last year/beginning of this year.  As noted in the intro, this figure is based on Holland’s “Finale” suit from the movie.  The figure stands just over 6 inches tall and he has 34 points of articulation.  This guy is sporting an all-new sculpt, courtesy of sculptor Rene Aldrete.  It’s got an articulation scheme that’s got pinless construction and follows a set-up similar to what we saw on the Amazing Fantasy sculpt.  The range of motion’s not *quite* as good on this guy as it was there, but he’s still quite mobile.  I just wish he had a slightly deeper motion for the ankles.  The sculpt’s a pretty solid offering, with the appropriate svelte build for Holland in the suit.  The details of the suit are slightly raised, which makes for a nice detailing pop.  In terms of coloring, this figure is pretty bright and colorful, and certainly the brightest of the Holland Spideys, but if you want to get technical, he should be a little bit brighter.  I mean, just a smidge.  It’s not enough to ruin it, and the application is sharply handled.  Spider-Man is well-accessorized, with a full selection of hands, in fists, open gesture, and thwipping.  He’s also got an unmasked Holland Peter hand (a surprisingly rare occurrence for Holland Spideys), which is a re-use of the more serious expression head from the Peter and Ned two-pack.

THE ME REMAINDER OF THE EQUATION

I was looking forward to this release (because I’ve honestly dug all of the Holland Spidey Legends up to this point), but in-hand, after a lot of hype, I was a little let-down.  At least at first.  But, as I got the chance to mess with him for the purposes of the review, I came back around on him.  He’s not a perfect figure, and sure, he pales in comparison to Amazing Fantasy Spidey, but most Spideys do.  As an MCU Spidey, though, he’s pretty darn great.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3541: Mr Sinister

Posted by Ethan Wilson in Reviews and tagged with , , , ,

MR SINISTER

X-MEN (TOY BIZ)

Fun FiQ Fact #0020:  Toy Biz’s original Mr Sinister mold had three different color variations, as they desperately attempted to keep up with the character’s comic design changes.

Remember when I was talking about how I screwed up on my ID-ing of the Mr Sinister figures from Toy Biz?  It was a week ago, so it shouldn’t be too distant in your memories.  Well, there’s the three color variants, and I’ve looked at the original, and the late run repaint, but there’s one more, right in the middle, and I haven’t looked at him.  I don’t like the dangling anticipation, so check it out!  The last one!  Now with beard!

THE FIGURE ITSELF

Mr Sinister was released in the 1993 repaint series of Toy Biz’s X-Men line.  Last week’s Sinister was the way the repaint was shown off on the card back, but was actually released later, while this figure wasn’t pictured at all, yet was still the figure that shipped with the rest of the repaint series.  Like the other two Sinister figures, this one is 5 inches tall and he has 8 points of articulation.  It’s exactly the same sculpt as before.  He’s still stiff, but he still works for the character.  The color differences between this guy and the very first release are exceedingly minimal.  In fact, the two are identical apart from the outlined lips and the presence of the beard.  That’s it.  That’s the whole change-up.  Not even a minor palette swap.  I mean, I guess it could be worse?  It was enough to get me to buy it, so somebody won.  I don’t know who.  I mean, Toy Biz went out of business years ago, and I bought all of my Sinisters second hand, so not them.  Was it me?  Did I win?

THE ME REMAINDER OF THE EQUATION

It’s crazy that I didn’t have this guy on hand to do both repaints in one review last week, right?  Like, what are the odds that I’d find this repaint right after reviewing the other one?  Well, pretty low, because this one has been sitting in the backroom at All Time Toys since I got the other one.  They came in at the same time, and I got so distracted by the more obvious repaint, that I missed that I didn’t have this one.  Look, I try, you guys, but the Sinisters just confuse me.  They’re my Toy Biz blindspot!  Well, now I have all three, so no one can stop me now!

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3540: Drax The Destroyer & Moondragon

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

DRAX THE DESTROYER & MOONDRAGON

MARVEL LEGENDS (HASBRO)

Fun FiQ Fact #0019: In the comics, Drax the Destroyer is not an alien, but rather the soul of a human man, Arthur Douglas, bound to an artificial body. His daughter Heather Douglas has her own identity, Moondragon!

My direct exposure to Marvel’s cosmic side as a kid was kind of fleeting.  I knew a little from the Fantastic Four and Silver Surfer cartoons, which was certainly cool and interest piquing, but I had to rely more on my Dad’s knowledge for the rest of things.  As such, I have the appreciation that he gave me for certain characters, which results in me liking characters that I’ve only really ever known second hand, just because he did.  That initially applied to Drax (though I knew him a *little* from the Surfer cartoon), but I’ve obviously gotten to know him better since the Guardians movies came out. It still kind of applies to Moondragon.  Still dig them both, though.  Certainly enough to buy this Marvel Legends set.

THE FIGURES THEMSELVES

Drax and Moondragon were initially a Hasbro Pulse-exclusive Marvel Legends two-pack, but they were rather quickly upgraded to a wider Fan Channel release.  They’re part of a wider cosmic Marvel theme for exclusives from last year, which also featured the previously reviewed Ronan the Accuser, plus Star-Lord, and Yondu.

DRAX

In his initial appearances, Drax was more a tool than a character, designed to be the thing that took down Thanos.  As he progressed, he changed, in characterization and in look.  Early on, Drax wasn’t particularly large, but he grew in size over time, ultimately landing on the hulking behemoth look he’s got here.  The figure stands about 8 inches tall and he has 32 points of articulation.  Drax is built on the Caliban body, which is a reasonable choice for him.  He gets two new heads, new boots, and add-ons for his cape, bracers, and belt.  The heads give us stern and angry Drax options, which certainly makes for some fun variety.  I personally lean more towards the stern, but they’re both solid.  The cape is a little stiff, but not terribly so, and the other add-ons are pretty by the numbers, but still good.  His color work is quite fun; the bright green and purple definitely gives him some really nice pop.  It’s gonna be hard to miss him on the shelf.  Drax is packed with two sets of hands, in fists and relaxed, as well as the previously mentioned extra heads, which is honestly pretty strong for a figure of his size.

MOONDRAGON

Moondragon’s had a few looks over the years, all of them kind of circling around the same concept.  This figure uses a look that kind of averages them all.  It’s not bad.  This is only her second action figure (and the first was a Minimate), and her first Legend.  The figure stands 6 1/4 inches tall and she has 27 points of articulation.  She’s using the same pinless construction legs as Clea, with a bunch of newer, character-specific parts.  The new parts are surprisingly in depth in terms of detailing, with sculpted elements on her upper arms and upper torso, rather than just a bunch of painted details.  The head’s a solid recreation of her usual look in the comics.  Like Drax, the cape’s a bit restrictive, but it does at least look pretty cool.  Her color work is more subdued than her father’s, relying on some more minor changes in greens.  It’s still a good look, and definitely feels well suited to the character.  Moonstone is packed with two sets of hands.  It’s light, but I’m not entirely sure what else you would give her.

THE ME REMAINDER OF THE EQUATION

I passed on this set as Pulse-exclusive because I didn’t feel an undying need to jump through hoops to get them, but once they got the wider release, the hoops were gone.  Much easier to justify them at that point.  I largely got the pack for classic Drax, because I really dig that look.  He’s really fun, and exactly what I was hoping for.  Moondragon is a little less thrilling on her own, but she’s hardly a bad figure, and it’s nice to finally get her in Legends form.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3539: The Mandalorian – Glavis Ringworld

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

THE MANDALORIAN — GLAVIS RINGWORLD

STAR WARS: THE BLACK SERIES (HASBRO)

Fun FiQ Fact #0018:  There have been 14 versions of Din Djarin released in The Black Series, and 6 of those releases have been some variation on his fully kitted-out Beskar armor.

My investment in Star Wars: The Black Series has dwindled a bit more recently, because I’m honestly starting to get ever so slightly Star Wars-ed out at the larger scale.  So, rather than get *everything*, I’m instead focusing a bit more on primary looks of heavy hitters.  There’s a bit more revisiting there than you might think at first go, which is kind of what we hit with today’s offering.  Early into the first season of The Mandalorian, main character Din Djarin upgrades to a full set of Beskar armor, which has been more or less the consistent look of the character since.  It doesn’t make for a ton of variation with figures, I guess, but they make do, and there’s enough minor tweaks to justify it, right?  Right.  So, here’s another Din Djarin.

THE FIGURE ITSELF

The Mandalorian – Glavis Ringworld is figure 08 in the Book of Boba Fett sub-line of Star Wars: The Black Series‘ Phase IV incarnation.  He’s based on Din’s ever so slightly tweaked look when he reappears in Book following a period going solo after handing Grogu over to Luke at the end of his own show’s second season, which is honestly a good look.  The figure stands just over 6 inches tall and he has 33 points of articulation.  We’ve had a general Beskar Din sculpt floating around in Black Series for a while, but it was kind of cobbled together and had a fair number of inaccuracies.  This figure gets an all-new sculpt to replace that, which is a really strong offering.  Of particular note, we’ve finally gotten a proper new helmet sculpt, after working with the slightly off one that went all the way back to the very first version.  The new one is pretty spot-on, getting the proper shaping down, and sporting sharp, clean detail work.  The articulation scheme is also tweaked, following the newer style; it works fine, but it does lean into the “no double joints” thing that Black Series has gotten into, which is at times reductive.  His armor construction has a bit more overlay to it, with more free floating parts.  Din’s cloak is also now a proper soft-goods piece, rather than the thicker rubber piece from the first release, which means he can finally wear the cloak and the jetpack at the same time, as he does in the shows.  That’s a definite plus.  Din’s color work is pretty solid; the paint application is all rather clean, with minimal slop and bleed over.  The silvers in particular are nice and sleek, and they’ve also added in his appropriate blue accenting, which gives him a nice degree of pop.  Din is packed with the Darksaber, his blaster pistol, and vibro-knife.  The Darksaber sports a modified hilt, which now has a loop, so it can hang from his belt, as seen in the show.  The knife is small, and he can’t really hold it…and also, there’s not really anywhere to keep it.  Still, I guess it’s cool that they included it at all.

THE ME REMAINDER OF THE EQUATION

I was pretty excited for the original Beskar Mando…and then he hit and he was kind of a let-down, honestly.  Still, I kind of pushed it off and called it a day on that look.  When this figure was announced, I was initially planning to skip this one, but the more I looked at it, the more it looked like the figure I wanted the first time around.  Simply put, that’s exactly what he is.  He’s the best Din Hasbro’s done, and just one of the line’s better figures in general.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.