Tag Archives: Clone Wars

#0719: Clone Commander Doom

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CLONE COMMANDER DOOM

STAR WARS: THE BLACK SERIES

CommanderDoom1

DOOOOOOOOOOOM!!!! Yes it’s DOOOOOOOOOOOOM!!!! So, hey, you know one cool thing about Disney owning both Marvel and Star Wars AND Hasbro holding the toy licenses for both of those properties? They can do cool combo stuff, like today’s focus, Clone Commander Doom, who began his life as a minor, cool little reference character, who I’m sure no one ever thought would get an actual figure with that name. But, here he is! Isn’t that cool?

THE FIGURE ITSELF

CommanderDoom2Commander Doom was released in the second series of the 2014 round of the 3 ¾ inch Star Wars: The Black Series figures. Did you get all that? Should I repeat it? Yeah, Hasbro’s release schemes are just a tad confusing. Commander Doom here is based on his appearance in the Star Wars: The Clone Wars episode “The Unknown,” where his animation model was based on Dr. Doom, the Marvel Comics character. One has to wonder if Commander Doom has some sort of rivalry with Clone Commander Fantastic; that would be nifty. The figure stands just over 3 ¾ inches tall and has 24 points of articulation. Sadly, it seems that Hasbro’s cutting back on the articulation of the smaller-scale Black Series stuff again. Doom loses both the ball jointed hips and the mid-torso joint of prior Clone Troopers, which is a bit of a bummer to say the least. It might be hard to tell under that non-standard paintjob, but Doom’s armor is mostly standard issue stuff. He’s wearing a modified form of the Phase II trooper armor, with a visor/antenna added to his helmet (in a similar fashion to Commander Cody) and a battle “skirt” thing, which has holsters for his blasters. It’s worth noting that, while Doom hails from an animated show, this figure has been sculpted to fit in with the more realistic figures that make up the rest of the line. With that in mind, Doom’s sculpt does a pretty good job of taking his design from the show and translating it into “real life.” The sculpt is a little softer than I’d like in some areas, but it’s nicely handled overall. I’m still not 100% sold on the look of the wrist joints, but that’s a minor issue, and the movement they provide is certainly enough to warrant their inclusion. Now, this is a Hasbro figure, which means that, no matter how good the sculpt may be, the paint is likely to be a letdown. While I certainly wouldn’t say this figure has the worst paint I’ve ever seen on a Hasbro figure, he’s still got more than a few occurrences of bleed over and slop. Also, his arms and legs are just molded in a slight off-white, as opposed to being grey due to scuffs and dirt, which robs him just a bit of his uniqueness. Aside from those issues, I will say Doom’s a pretty vibrant figure, especially for a Star Wars figure, and I enjoy how the various customizations to his armor have been carried out. Doom is packed with a pair of blaster pistols, which can be held or stored in his holsters. This feels a little light, especially for the higher Black Series price.

THE ME HALF OF THE EQUATION

While I was out looking for new stuff on Force Friday (and also visiting Super Awesome Girlfriend for the weekend), one of the Walmarts I stopped by happened to have some of the pre-Force Awakens Black Series figures in stock, this guy included. I had actually been hoping to find this guy ever since I stumbled upon the pictures of his prototype online, so I was pretty happy about stumbling across him. Doom has his share of issues, but he definitely stands out from the rest of my Star Wars figures, and he’s a shout out to one of the best characters in comics to boot!

CommanderDoom3

#0400: Waxer, Boil, & Numa

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

WAXER, BOIL & NUMA

STAR WARS (SIDESHOW)

When it comes to Star Wars, it’s no secret that I’m not much of a fan of the prequel trilogy. The reasons are many, far too many to list here. However, I don’t hate everything about the prequels. In particular, the two spin-off cartoons (The Clone Wars and Clone Wars) were actually not terrible. The latter series kind of meandered and wasn’t always the greatest, but it had its shining moments, and there are a few episodes in particular that I really enjoyed. When Sideshow was looking for interesting ways to expand their 12 inch Star Wars line, they turned to the cartoon for some ideas. Today, I’ll be looking at two of the line’s clone troopers, Waxer and Boil, as well as their small compatriot Numa.

THE FIGURES THEMSELVES

This set was released by Sideshow in the summer of 2011 as part of their Star Wars line. The set is based on the episode “Innocents of Ryloth” which happens to be one of my favorite episodes of the show (it probably helps that the episode is essentially a 30 minute love letter to Aliens). This is the regular release of the set, but there was also a Sideshow exclusive version which had an extra piece for Numa.

WAXER

What’s interesting about Waxer is that he actually wasn’t created for the show. He actually first appeared in a comicbook story. When they got around to adapting that particular story, he had to be replaced by Boil due to having the misfortune of dying one episode previous. Bummer. Waxer is essentially based on his appearance in the episode, but he’s been given a more real world style. The figure is about 12 inches tall, and he’s got a bunch of articulation, which I don’t have an exact count on, as I don’t make a habit of undressing my action figures. Aside from the black jumpsuit, which is very well tailored, Waxer is pretty much all sculpted pieces. They’re all from previous clone troopers, but that doesn’t make them any less impressive. They are sharp and symmetrical, and they really look like the armor from the movies. The paintwork is exceptional, with plenty of weathering and texture to really make the armor look appropriately broken in. The orange accents, denoting him as being a clone under Commander Cody, are vibrant and clean, and really add to the figure’s look. He also has a few spots of graffiti on his helmet, which are true to the episode, and really contribute to the uniqueness of the figure. Waxer includes an extra un-helmeted head, a Phase II helmet, an extra set of fisted hands, extra running feet, blasters in three sizes, binoculars, and a display stand with the basic Star Wars logo. The head, while not Hot Toys quality, is pretty impressive. It’s an alright likeness of Temuera Morrison, though with the baldness and the smirk, it bears an uncanny resemblance to Billy Zane. The extra helmet is fine, though it lacks the personalization of the regular helmet. The hands offer a few options, and are all very nicely sculpted. The running feet are a neat concept, but finding a use for them can be difficult. The binoculars and blasters are pretty standard fare, but impressive nonetheless, and the stand is the new Hot Toys-style stand that allows the figure to be picked up and replaced with ease.

BOIL

Boil was created for the show as a partner in crime for Waxer, which is a role he filled quite well. Like Waxer, he’s based on his appearance in “Innocents of Ryloth” with a slightly more realistic approach taken. He’s about 12 inches tall, and he has the same points of articulation that Waxer has, however many that may be. He uses the basic Sideshow armored buck as a starting point, with the same black jumpsuit as Waxer. The armor is all the same, and it’s still really well executed, so that’s a definite plus. From the neck down, Boil’s paint is identical to that of Waxer. It’s fitting, since that’s true to the design, and it’s still an impressive set of work. Boil’s helmet is slightly different. He doesn’t have the vertical line of orange going down the center, and he has some slightly more elaborate graffiti on his helmet. It looks really good, and it’s minor, but different enough to set him apart nicely from Waxer. Boil pretty much comes with all the same stuff as Waxer: an un-helmeted head, a Phase II helmet, the extra hands and feet, the assortment of blasters, and the display stand. Most of it’s the same, but the helmet is done to match the pattern on his regular helmet, and obviously the un-helmeted head is different to convey Boil’s different look. He’s got a full head of hair, so the Morrison likeness is a bit more immediately apparent. The mustache looks a bit silly, but that’s true of the show’s design. He also has a few extra hands in a variety of gestures, which make for some entertaining poses.

NUMA

Numa is one of the titular innocents from the episode this set is based on. She’s essentially just Newt from Aliens. Her presence is what really makes this an episode-specific set, rather than just a pair of clone troopers. The figure is just shy of 6 inches tall and she features 5 points of articulation, which essentially means she’s only good for slight variations on the basic standing look. Numa’s smaller stature means she gets an all-new sculpt. It’s fairly well done. It seems to be the proper proportions and such. Numa’s head is probably the sculpt most negatively affected by the more realistic style. It’s not bad, but she seems somewhat expressionless. Also, the head seems a bit too small for the figure, which kind of makes her seem out of scale with Waxer and Boil. Numa has a cloth dress with a pleather belt. It’s pretty well tailored to the figure, and it seems to be an accurate depiction of what she wore in the episode. Numa’s paint work is pretty decent. It’s not super high quality, but it’s clean and even, and it does a good job with the colors and such. Numa’s only accessory is a display stand which can plug into the bottom of her left foot. The exclusive set added an extra arm holding the toy that she carries for most of the episode. The lack of accessories is forgivable, since Numa’s practically an accessory herself.

THE ME HALF OF THE EQUATION

Like I said above, “Innocents of Ryloth” is one of my favorite episodes of the series, so I knew pretty much as soon as this was announced that I wanted it. I remember I actually only saw a headshot of the two clones and I thought to myself, “well if they included Numa, I’d have to get it.” No sooner had I thought that, I scrolled down and saw the full picture and there she was. My super awesome, super supportive parents were kind enough to buy this for my birthday in 2011, which was very nice of them. I really like this set. Sure, Numa’s not perfect, but the clones just about are, and Numa is decent enough that she makes a great complement to them.

#0320: Clone Sergeant

Posted by Ethan Wilson in Reviews and tagged with , , , ,

CLONE SERGEANT

STAR WARS: THE BLACK SERIES

CloneSergeant1

So, remember how Star Wars: The Black Series was supposed to be a deluxe 6-inch line of figures, sort of as Hasbro’s big move to please the fans? Yeah, well apparently, that was just a little too un-Hasbro of them. It was a move that wasn’t confusing at all, and that didn’t work. So, to make up for this, they decided to simultaneously release a 3 ¾ inch line under the exact same name, to the detriment of fans and ill-informed retail workers everywhere. On the plus side, the line does promise a more diverse line-up than the larger scale figures, as well as some improvements over the previous 3 ¾ inch figures. Today, I’ll be taking a look at the line’s version of the Clone Sergeant, who interestingly enough was just announced for the 6-inch line as well. Prepare for the confusion everybody!

THE FIGURE ITSELF

CloneSergeantWilsonThe Clone Sergeant is part of the first assortment of the 3 ¾ inch scale Star Wars: The Black Series. The figure is just a basic Clone Sergeant, not any character in particular, and the figure is in the clone’s original “Phase I” armor. If I recall correctly, the Sergeant rank is not seen in Attack of Clones, so this is officially a Clone wars figure. The Sergeant is about 3 ¾ inches in height and features 26 points of articulation. While the articulation is still a little bit stilted in a few areas, the level present in these new figures is incredibly impressive. Hasbro’s done quite a few Clone Troopers over the years, with lots of shared parts between them, but I think that the newly engineered articulation means this figure sports an all-new sculpt. The details of the sculpt are nice and sharp, and the figure’s proportions look pretty good. The helmet is removable. The helmet is properly scaled, but in order to make it fit properly, the head had to be a tad under-scaled. The underlying head also bears little resemblance to actor Temuera Morrison, which is too bad. However, I can’t see many people leaving the helmet off, so it’s not much of a loss. The paint work is basic, but also key in differentiating the Sergeant from the other Clones. The Sergeant has an olive green accent on his armor, which looks really great, and definitely makes the figure stand out. The paintwork is all nice and cleanly applied. The unmasked head has some slightly odd eyes, but they aren’t horrible for the scale. The Sergeant includes both long and short blaster rifles, which allows you to add just a touch of customization.

THE ME HALF OF THE EQUATION

The Clone Sergeant was purchased at a Walmart, nearby my girlfriend’s college campus. I don’t usually shop at Walmart, but she needed to get a few things and I went with her. Me being me, I took a look in the action figure aisle, where I found this guy and a few other SW:TBS figures. I hadn’t initially planned on getting any of them, but Super Awesome Girlfriend is a terrible influence on me (okay, not really. She’s just incredibly supportive!) So, I ended up getting a few figures from the line. I really like the Sergeant, mostly due to the green accents, which are just really cool!

CloneSergeant2