Tag Archives: Colossus

#1208: Colossus

Posted by Ethan Wilson in Reviews and tagged with , , , ,

COLOSSUS

MARVEL SELECT

colossusms1

Wow, it’s been a really long time since I’ve reviewed a Marvel Select figure. <Looks back at reviews>  Holy crap, it’s been 506 reviews since I last looked at a Marvel Select figure.  That’s quite a while.  Well, why not pull something out of the archives, then?  Today, I’ll be jumping over into the world of Marvel’s merry mutants, the X-Men, and looking at one of my personal favorite members of the team, Piotr Rasputin, aka Colossus.

THE FIGURE ITSELF

colossusmswilsonColossus is the 75th figure in Diamond Select Toys’ Marvel Select line, released in 2012.  He’s one of only two figures to hit that year, largely due to the focus on a certain team of Earth’s Mightiest Heroes who happened to have a movie released that year.  He continued the trend of X-Men based upon the early ‘80s line-up of the team (the other X-Man from 2012, Storm, also followed this trend).  The figure stands almost 9 inches tall (he’s a big guy) and he has 30 points of articulation.  He’s one of the earlier instances of near-Marvel-Legends levels of articulation for a Select figure, and it’s genuinely impressive just how much movement they were able to get into this guy, given his mass.  Colossus sported an all-new sculpt.  It doesn’t appear to be based on any particular artist’s rendition of Piotr, but it does lean a little more modern in terms of design sensibilities than a lot of Colossus figures do.  This is most notable in the face, which lacks the usual rounded features in favor of something more sharp and angular.  While I can’t say it’s my go-to Colossus look, it’s certainly not a bad looking rendition of the character.  The body continues some of the stylization present in the face; earlier renditions of Colossus tended to be more consistent in build, but this guy’s definitely favoring his upper body.  He’s almost sporting Bruce Timm anatomy (though he’s definitely not Bruce Timm styled).  There’s one oddity about the body sculpt, specifically the upper body: the upper portion of his tunic is separate from his actual torso.  While it’s not out of the ordinary for such an element to be a separate piece, the fact that it’s not actual fixed in place in any way is slightly odd.  There’s a fully sculpted torso under there, which leads me to wonder if there was a scrapped variant of this figure sporting his outback costume.  Regardless, you’ll only really notice the separate tunic piece when picking the figure up, and it stays in place well enough.  It also adds an extra dimension to the figure, which is always cool.  In terms of paint, Colossus is very nicely rendered.  The colors are all nice and very vibrant, and everything is very cleanly applied.  There’s a nice subtle accenting to the yellow portion of the tunic, which keeps it from being too plans.  I also quite like the metallic work, especially on the arm bracers.  A lot of the X-Men Select figures included a section of the Danger Room as a display base, and Colossus was no exception.  Well, generally speaking.  He comes with a spike wall, clearly meant to be from the Danger Room, but it’s not exactly a stand, since it doesn’t really support him.  Still, it’s a cool piece, and a nice addition to the armory.

THE ME HALF OF THE EQUATION

Colossus was my second Marvel Select figure, picked up during Cosmic Comix’s Biggest Sale of the Year in 2012.  I had initially been planning to pick up Ultron during that year’s sale, but I got a subscriber coupon a week prior and got him then.  I still wanted to take advantage of the sale, and I’ve always liked Colossus, so this guy was my next choice.  The old Marvel Legends figure has always been one of my favorites, so this guy had quite a bit to live up to, and I think he did just that.  He’s really just a very fun figure.

#1128: Colossus & Nightcrawler

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

COLOSSUS & NIGHTCRAWLER

MARVEL MINIMATES

nightcrawlercolossus1

The X-Men line-up presented in Giant Size X-Men #1 undoubtedly gave us some of the more memorable X-Men.  Obviously, there’s the likes of Storm and Wolverine (even if he did appear elsewhere first), but it also gave us both Colossus and Nightcrawler.  While they may not be quite as big as some of the others (and poor Colossus has been woefully overlooked when it comes to the cartoons), they’re still pretty popular with the fanbase at large.  They also happen to be two of my favorite X-Men, so packing them together is pretty awesome!

THE FIGURES THEMSELVES

Colossus and Nightcrawler are part of Series 68 of the Marvel Minimates line, which is based around GSXM #1.  Both figures are based on their Dave Cockrum-designed looks, but it’s worth noting that these two stuck with these particular looks for a good long while.

COLOSSUS

nightcrawlercolossus3Colossus has had a few different ‘mates over the years.  That being said, this is the first one to directly retread on previous territory, being a pretty straight re-do of the GSXM boxed set version (the alt look for the Series 47 version came pretty close, but was actually based on his slightly tweaked ‘90s look).  The figure is built on the standard ‘mate body, and as such stands about 2 1/2 inches tall and has 14 points of articulation.  Colossus features add-on pieces for his hair, wrist bands, torso cover/belt, and boots.  The hair and gauntlets were both used on the 47 Colossus; they worked well there and they work well here.  The torso piece and boots are both new to this ‘mate.  It’s interesting: after getting several attempts at handling the torso piece a “better” way than the GSXM set’s version, they just went back to essentially the same style.  I’m certainly not complaining!  I do like the subtle hints of musculature on the chest piece, which make him seem larger than the others, but prevents him from looking puffy.  I’m not 100% sold on the boots.  Something about the knee pads seems off to me.  There’s certainly been worse, though.  Colossus’s paint is very impressively handled.  The colors are nice and bold, and he really pops.  The line work is very sharp, and the details, the face in particular, are a very good rendition of Cockrum’s Colossus.  I was very happy to find out that the actual torso has full detailing, allowing you to display Colossus shirtless, if you so choose (some people like that sort of thing).  Colossus’s only accessory is a clear display stand, which feels rather light.  Obviously, the parts for an un-armored Piotr would make him essentially a second figure, but the fastball special hand should have been included at the very least.  Oh well.

NIGHTCRAWLER

nightcrawlercolossus2Amazingly enough, this is only the third time we’ve gotten Nightcrawler (and the third time we’ve gotten this exact costume too, no less).  I thought the Excalibur set version had him pretty well covered, but it’s been over five years since that one was released, so another version feels warranted.  Nightcrawler has  unique hands and feet, as well as sculpted add-ons for his hair, shoulder pads, and tail. The tail remains the same piece used on both prior Nightcrawlers (and his dad Azazel), but everything else is new to this figure.  Personally, I prefer the Wolverine-style shoulder pads from the last Nightcrawler to the ones featured here (I like the neck to be left unencumbered as much as possible), but they’re a decent enough piece, I suppose.  The hair, hands, and feet are all improvements over what we’ve gotten before (the hands especially, since the prior hands are huge) and are just well sculpted all around.  The ears could maybe stand to be a little more pronounced, but that’s the only real negative I’ve got.  Nightcrawler’s paintwork is pretty good, but not without its issues.  The basics are all pretty good.  The color palette is bright and bold, and the colors accent each other well.  His basic head has a frightening expression we haven’t yet seen on a Nightcrawler ‘mate.  It’s a good rendition of the earlier, scarier NIghtcrawler, and it makes this figure a little more specific to those appearances (thus giving the figure a bit more reason to exist).  Unfortunately, the application of a lot of the paint, especially the red, is a little uneven.  The red detailing on the edges of the gloves and boots is far too thin, resulting in an obvious line where the underlying colors switch from white to black.  That, coupled with the fact that the glove trim stops abruptly for the inner half of the arm, makes him look a little unfinished.  Nightcrawler includes an extra head with a more jovial expression (my preferred of the two faces), a cutlass (finally!), a “bamf” stand, and a clear display stand.  All of these are pretty cool, except the “bamf” stand, which is more than a little frustrating, since the peg is too small for either foot, and it also requires him to stand with both feet together, a rather un-Nightcrawler stance.

THE ME HALF OF THE EQUATION

Though I missed out on the GSXM set, I wasn’t missing either of these characters, having picked up their subsequent releases.  Colossus was a pleasant surprise.  There was something missing from the ‘mates since the GSXM version, which I think has been found again with this guy.  He’s the perfect embodiment of the character.  I don’t see him being replaced any time soon.  Nightcrawler is a more mixed figure than Colossus.  I’ve never really cared for the original ‘mate, but the Excalibur version was pretty solid.  This one adds some nice stuff (the extra head, the new hands and feet, and the cutlass), but also takes a few hits (the paint, the effects base, and, if I’m being really picky, the shoulder pads).  The good outweighs the bad, but he could still be a bit better.

#0819: Giant-Size X-Men #1 Boxed Set

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , , ,

STORM, COLOSSUS, NIGHTCRAWLER, SUNFIRE, BANSHEE, & THUNDERBIRD

MARVEL COLLECTOR EDITIONS (TOY BIZ)

ANADXMenPack1

In the 1960s, when Marvel Comics was on fire with all sorts of new ideas, the X-Men were created. The team was Cyclops, Marvel Girl, Iceman, Beast, and Angel. While the series was a moderate success, it wasn’t as big as other titles of the time, and so the book eventually became solely a reprint series, before ending entirely. But, as anyone who has so much as thought about a Marvel comic in the last 30 years can tell you, that was far from the end of the X-Men. In 1975, the series was relaunched with Giant-Size X-Men #1, which featured an all-new, all-different cast of characters. This new cast proved far more successful than their predecessors, and the series went on to become one of Marvel’s most popular. In the 1990s, the X-Men were no strangers to toys, but most were based on the contemporary designs. To appease older fans, Toy Biz launched a line of special boxed sets, based on more classic incarnations of teams, including the All-New, All-Different X-Men, which I’ll be looking at today!

THE FIGURES THEMSELVES

ANADXMen1

These six figures were released as one of the three sets in the Marvel Collector Editions line. All six are based on their appearances in Giant-Size X-Men #1.

STORM

ANADXMen2Though she’s by far the most well-known of the figures in this set, this was the first time Storm’s original costume had seen plastic form, and only the second sculpt the figure had gotten in the expansive 5-inch scale. The figure stands 5 ¼ inches tall and has 13 points of articulation. Her sculpt is generally pretty good, and certainly much better than the Marvel Girl sculpt from this set’s X-Men #1 companion piece. The head is definitely the nicest piece here, as it captures Cockrum’s take on Storm quite well. The body is decently sculpted, but suffers from a few issues. First off, she seems to lack Storm’s usual imposing stature, which is sadly common with her figures. She’s also got these odd, claw-like hands, which are definitely too big for the rest of her body. To top it all off, she’s nearly impossible to keep standing for very long. I do like the way they’ve handled the cape, though; it’s cloth, but it’s multiple layers, which give it enough weight to keep it from hanging oddly, and it avoids cutting off articulation as well. Her paintwork is pretty much on par with the rest of what Toy Biz was doing at the time. The colors are nice and vibrant, and everything is pretty clean, if perhaps lacking in subtlety. The edge of her collar is missing some yellow in a couple of spots, but other than that, everything looks pretty good.

COLOSSUS

ANADXMen4This marked the third time Toy Biz made a Colossus figure. They had a bit of a Goldilocks thing going on with them, though. The first one was too small, the second one was too big, but this one was juuuuust right. The figure stands 6 inches tall and has 14 points of articulation. The decision not to give him any wrist movement is a little baffling, especially since he’s got a built-in way to mask the joints, but the rest of the movement is all pretty good. Colossus is probably my favorite sculpt in the set. He’s not saddled with any real pre-posing, and his proportions don’t get too wonky, apart from his hands being maybe a touch on the large side. The details here, especially on the exposed metal parts of his body are really stand-out, and he just looks really sharp. His head has an expression that’s intense, but not so intense as to make him look villainous. The paint on Colossus is pretty sharp too. He’s got no noticeable slop, and the details on his costume really look great. The red and yellow really just pop on this guy.

NIGHTCRAWER

ANADXMen3Nightcrawler received probably the best of the initial figures from Toy Biz’s X-Men line, but that didn’t mean there wasn’t room for improvement, especially since the original had sported odd suction cups on his hand and leg. It was also hard to get him into any of Nightcrawler’s distinctive crouching poses, which was the main thing this figure set to fix. The figure is 5 ¼ inches tall and has 16 points of articulation, as well as a bendable tail. If there’s one major issue with this figure, it’s that he’s just too tall. Nightcrawler should really be noticeably shorter than the rest of the team, but were the figure not crouching, he’d be taller than half the figures in the set. That’s kind of off. Aside from that glaring issue, the sculpt is generally pretty passable, though he’s more of an Excalibur-era Alan Davis-styled Nightcrawler than a GSXM Cockrum-styled one. The general quality of the sculpt is definitely nice, and he has some pretty sharp detailing. The shoulder pads are rather obviously separate pieces, which is frustrating, but not the worst thing. Paint is definitely this figure’s strongest suit, and he’s definitely got the strongest paint in the set. The colors of his costume are nice and bold, and everything is very sharp. What’s really cool is that his costume is all matte finish, while his skin/hair is much glossier, making an instant distinction between the two.

SUNFIRE

ANADXMen5The shortest-lasting (but not shortest-lived) member of the ANAD team was definitely Sunfire, who quit after just one issue. In addition, as he was not new to X-Men the series at the time of Giant-Size X-Men #1, having previously appeared as a “foe,” so he wasn’t even on the cover of that issue. This all ends up making him one of the least-remembered members of this team. Amazingly enough, it wasn’t his first 5-inch figure from Toy Biz (though it was his second of two, so he didn’t get anymore), but it is, to date, the only figure of his classic costume ever made. The figure stands 5 ¼ inches tall and has 16 points of articulation. Sunfire’s sculpt is kind of complicated. There are some really great parts, such as the brilliant texture work on the scaled part of his costume, and a very nice translation of his somewhat goofy-looking mask, but it’s all placed on an almost comically skinny body. Sunfire certainly wasn’t a body-builder, but he wasn’t scrawny either. Then there are his feet, which look to have been sized for the body he should have had, which creates this sort of clown shoe effect. The sculpt isn’t terrible, but it’s also not great either. The paint is good in theory, and decent in practice. The application is pretty solid, and aside from one tiny inaccuracy (having his neckline go all the way up to the mask when it should end just north of the collar bone) it looks pretty good. The only issue is the black wash they’ve used to bring out the details of the scaled parts. It works overall, and is especially good on the arms, but the coverage is inconsistent, and the top of the right leg on my figure is totally missing any painted detail, which sticks out quite a bit.

BANSHEE

ANADXMen7Banshee was the other “not new to the series” character, though he had shown up more than once before. He also stuck with the team a bit longer than Sunfire, and hung around as a supporting character even after leaving the team, which resulted in him being a fair bit more memorable than Sunfire (of course, one of them spent the last decade dead, and it wasn’t Sunfire, so maybe popularity isn’t always a great thing). This was his third figure from Toy Biz, but his first to sport his classic green and yellow, which is definitely my favorite of his looks. The figure stands 5 ¼ inches tall and has 16 points of articulation, just like the last two figures. Like Sunfire, his sculpt is a mix of good and bad. The general build isn’t bad, and he isn’t quite as scrawny as Sunfire. However, he’s fairly pre-posed, and the “wings” limit his posability a bit. Also, I get that his main thing is screaming, but I’m not sure how well it turned out on this head sculpt, where he looks like he’s just sort of opening his mouth kind of wide. I feel like an extra, non-screaming head should kind of be a requirement for all Banshee figures, but none of them have ever done such a thing. Banshee’s paint is pretty decently handled; the costume definitely fairs best, with some nice, subtle airbrushing to help highlight some of the sculpted musculature. The head has a passable paintjob, though I feel the colors end up looking a bit too muted.

THUNDERBIRD

ANADXMen6Now, here’s a short-lived X-Man. See, cuz he died. Get it? Yeah, you get it. Yes, Thunderbird was officially the first X-Man to die in action, just to prove a point. According to writer Chris Claremont, it was actually a toss-up as to whether it would be him or Wolverine who died during the X-Men’s second mission. Thunderbird got the axe because his powers were more non-descript than the others, and also because he was just a tiny bit on the stereotype side of things, but could you imagine how different X-Men would be without Wolverine? Seeing as he was dead for most of the team’s run, this was actually the first Thunderbird figure ever made, though it wouldn’t be the last. The figure is 5 ½ inches tall and has 14 points of articulation. His sculpt is actually pretty good, overall. The head has some very nice detail work, and is probably the most realistic looking of all those in the set. The body is less realistic, with some slightly out-there proportions, but it’s not too bad, overall. The right hand is sculpt to hold something; I don’t know what it was supposed to be, since he included no accessories, and I can’t really think of anything Thunderbird would need to hold, but whatever. The paintwork on this figure is quite nicely done. Everything is nice an clean, and I love the slight accenting on the various parts of the costume.

THE ME HALF OF THE EQUATION

After getting the other two sets in this line as a kid, I bet you think I got this alongside them, don’t you. Well, you’d be wrong. My dad did have this set, and he even offered to buy me one of my own, at a discounted price, when the now defunct Ageless Heroes Comics was going out of business. I was feeling particularly silly that day and turned the set down, a decision I proceeded to regret for the next 18 years, after the set’s price jumped on the aftermarket. This past November, while attending Philcon, I stopped by the House of Fun, and pulled this set out from underneath several boxes. It was actually less than I would have paid for it back in the day, which made me doubly happy. This is by no means a perfect set, but there are some definite gems within, and I’m happy to have it at last.

#0427: DOFP Wolverine & Colossus

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

DAYS OF FUTURE PAST WOLVERINE & COLOSSUS

MARVEL MINIMATES

Marvel Minimates has pretty consistently been the flagship of the Minimates brand, but it hasn’t been without its dark periods. Every fan has their own personal preferences, which means that where exactly the low points of the line lie can vary from person to person, but pretty much everyone agrees that Series 12 and 13 are probably the worst the line ever got. It’s no coincidence that immediately after those two series, the line started taking quick strides in innovation. The line looked like it was on its last legs (Series 15, set to be released not long after, is the only specialty assortment in the history of the line to be cancelled), and something had to change. Fortunately, the line did change, and it has continued for almost another 50 series, but man, somewhere there’s an alternate universe where these were the last Minimates we ever saw.

THE FIGURES THEMSELVES

These two were released as part of Series 13 of Marvel Minimates. The series was based around the then current Astonishing X-Men. This is the variant set, which swapped out a “Days of Future Past” styled Wolverine in place of the regular Astonishing one.

DAYS OF FUTURE PAST WOLVERINE

Or, as he’s known on the box “DOFP Wolverine.” I mean, I know what that stands for, but you’ve got to imagine that somebody stood there looking at the box wondering what the heck a “Dofp” was. I just recently looked at the new and improved take on this design from earlier this year, which I quite liked. This one is….different. The figure is about 2 ½ inches tall and he features 14 points of articulation. He made use of the standard Minimate body, with the then standard Wolverine claws in place of the normal hands, as well as an add-on piece for the hair. The piece, like every piece in this series, is a re-use, in this case from the Series 6 New Wolverine. What’s interesting is that the box actually shows the figure with the hair from the Series 3 Logan figure, which is a superior piece. Not sure why they made the change. Paint-wise, this is a pretty drab figure. I know the design isn’t the most vibrant to begin with, but there’s just no pop with this figure. The choice to make the jacket painted on robs the figure of a lot of dimension, and the jacket’s detailing is sub-par at best. I’m not exactly sure what the deal is with the face, either. He looks like he’s been… smooshed or something. And that’s not even starting on the whole double chin thing he’s got going. DOFP Wolverine had no accessories.

COLOSSUS

Colossus’s return to life was an important part of the early Astonishing X-Men, so his place in this series isn’t too surprising. Plus, his history with Wolverine and his decent sized role in the original “Days of Future Past” make this pairing a pretty great one too. Colossus is roughly 2 ½ inches tall and he has 14 points of articulation. He’s based on Colossus’s look in Astonishing, which is just a slight tweak on his classic design, so it’s a reasonable look. The figure uses the basic body, with an add-on for the hair. The hair is a re-use from the Giant-Size X-Men boxed Set Colossus. It’s a pretty cut and dry case of “if it ain’t broke, don’t fix it,” so it works nicely for the character. The lack of any other add-ons means that he’s a rather scrawny looking version of the character, which other versions have avoided. Colossus’s paint is at least a bit better than Wolverine. His colors are pretty good, though the red might be a touch too bright for this look. The detail lines are pretty nice, though not as sharp as they could be in a few areas. The choice to put the belt on the torso makes the waist seem too long, but at least it’s nicely rendered. Colossus included no accessories.

THE ME HALF OF THE EQUATION

I picked up this set from a friend’s local comicbook store during a black Friday sale. I’m pretty sure I got it for slightly less than retail, which is probably a good thing. It was actually the first variant set I was able to track down, which is unfortunate to say the least. All in all, it’s not the worst set ever, but it’s one that’s seriously lacking. It’s fortunate that the line was able to move past this series and become better and more successful.