Tag Archives: Hasbro

#3379: Spider-Man 2099

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SPIDER-MAN 2099

MARVEL LEGENDS (HASBRO)

“Trying to create a new superhero, Miguel O’Hara accidentally turned himself into the best Spider-Man in the multi-verse.”

Into the Spider-Verse ends with a teaser sequence that introduces Spider-Man 2099, as well as the concept of him pioneering safer cross-dimensional travel.  Across the Spider-Verse builds on that set-up, and installs Miguel as a main character for the film’s story.  Also, he’s Oscar Isaac.  So, that’s pretty cool.  And he’s 2099, which is also pretty cool by default.  We didn’t actually see 2099 in his regular form in Into, so we had to wait until the new movie for toy treatment.  But here we are now, and we’ve got his figure.  Dope.

THE FIGURE ITSELF

Spider-Man 2099 is the fifth figure in the Across the Spider-Verse tie-in series of Marvel Legends.  Much like the Spot, 2099 is a design that’s largely unchanged from his comics counterpart, really just relying more on stylization to change things up.  Given how strong and distinctive 2099’s look, this is hardly a surprise.  The figure stands about 6 3/4 inches tall and he has 30 points of articulation.  2099’s articulation is one of this assortment’s most restricted, which is admittedly odd, since it doesn’t really feel like there’s any clear reason for that.  He just winds up with a slightly more rudimentary articulation layout.  It’s not *bad*, mind you, just a little bit clunky, and therefore a little surprising to see.  He does at least still get a ball-jointed neck, as well as the pinless construction on the arms and legs.  2099 is sporting an all-new sculpt by sculptor Arlen Pelletier, and aside from issues with the articulation breaking it up a bit too much during posing, I really quite like it.  He’s notably bulkier and taller than the other Spiders, which I definitely dig, and which is also in line with his animation model.  The detailing is all nice and sharp, and it’s nice to see Miguel get full sculpted elements for his costume, after being relegated to largely just paint on his last few Legends.  2099’s paint work is overall pretty on the basic side.  He’s blue with red accents, and a lot of that’s molded.  The colors are rather bright, and they’re flat, straying away from his usual metallics.  It makes sense, of course, given the desire to stick with the animation look, which isn’t as shiny looking as the comics.  I feel like there should be some sort of darker accenting on the blue sections, and the sculpted textures on the red get a little lost with nothing to make them pop, but as far as the basics go, he’s alright.  Miguel is packed with two sets of hands, in fists and open gesture.  It’s too bad we didn’t also get an unmasked head like with the others, but it’s possible that model wasn’t finalized in time.  Still, he feels a tad light.

THE ME HALF OF THE EQUATION

2099’s got a pretty sick visual, and getting Oscar Isaac to voice him in the teaser at the end of Into definitely had me hyped for this guy in the sequel.  I was rather looking forward to this figure.  Ultimately, he’s the tiniest bit of a let-down.  He’s not bad.  I can’t stress that enough.  He’s just kind of fine.  And in this assortment, that puts him a bit behind the rest of the pack.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3377: Peter B. Parker

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

PETER B. PARKER

MARVEL LEGENDS (HASBRO)

“Peter B. Parker must decide between protecting his old pal Miles and siding with his more experienced comrades.”

While Peter Parker was the main character of the comics version of “Spider-Verse,” for the Spider-Verse movies, the focus has been shifted to Miles Morales, with Peter, specifically the alternate universe Peter B. Parker, serving as a mentor to Miles.  It’s a change-up, but a decidedly fun one.  And there’s all sorts of goofy slacker Peter in costume looks that we got out of it.  So, let’s have a look at another Peter B. Parker!

THE FIGURE ITSELF

Peter B. Parker is the fourth figure in the Across the Spider-Verse tie-in line-up of Marvel Legends.  Technically, he’s not actually an Across figure, and is in fact the line-up’s one Into the Spider-Verse figure, making him the first true repeat.  He does at least get a slightly changed-up look, though.  While the last figure was based on Peter B’s fully civilian look, this one takes the next step in his costume evolution, with his into action look…well, at least the one before he gets his full costume back.  Yay sweat pants!  The figure stands just shy of 6 1/2 inches tall and he has 32 points of articulation.  Last time around, Peter was the most limited of the Spider-Verse figures in terms of articulation, but this one ends up fairing just a little bit better, largely due to the lack of bulky over coat, but also thanks to some of thinner limb parts, most notably the ankles and the neck, being less wobbly when posing.  Peter marks the sets one tiny little bit of re-use; the sweat pants are the same ones used on the prior figure, which does make a degree of sense.  Everything else is all-new, and it’s generally pretty good.  It’s certainly very on-brand for the film’s styling, though if I have one complaint it’s that his lower torso is definitely too fit and defined.  Those are Peter A’s abs, not Peter B’s.  It’s interesting, because that’s an area where re-using the torso from the prior figure would have solved the issue, and yet they opted not to.  One almost has to wonder if there was a plan to do a full Peter A figure, but they opted for the budget friendlier sweat pants version of Peter B.  Or perhaps there was some sort of a mix-up on the models being used.  Whatever the case, it’s not the end of the world.  Peter’s paint work is quite on the basic side, but that’s not a terrible thing, and he’s at least pretty eye-catching, and what’s there is clean.  Peter is quite on the light side for accessories, getting two sets of hands, one in fists and one in thwipping pose.  They look to be re-used from the last one.  Since we’re getting re-use anyway, getting one or both of those alternate heads might have also been nice, if there wasn’t any chance of any new parts.

THE ME HALF OF THE EQUATION

I wasn’t sure I was going to like this guy.  He honestly perplexed me a bit, since it’s odd to get another Into Peter B. before getting his new look from Across, but perhaps there’s a good reason for holding off on that one.  I was also a bit surprised that we still didn’t get Peter’s full costume.  That being said, I think I’m honestly happier with him this way.  We’ve gotten plenty of basic Spider-Men over the years, and a Spider-Verse one is kind of inevitable, so doing this one first is at least a slightly more unique look, and he’s also just a rather fun figure at that.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3374: Spider-Gwen

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SPIDER-GWEN

MARVEL LEGENDS (HASBRO)

“Spider-Gwen has grown up a lot over the past two years, keeping busy between band practice and protecting her city.”

Spider-Gwen, an alternate universe Gwen Stacy imbued with the Spider powers instead of Peter Parker, was introduced in, and central to, the comics “Spider-Verse” storyline, and was likewise central to Into the Spider-Verse.  The comics kept Gwen as pretty central to all the follow-up “Spider-Verse” events, and Across the Spider-Verse has the movies following suit.  Gwen was part of the rather small Legends tie-in for Into, and she’s also part of the much larger tie-in set-up for the sequel.  Let’s see how this one measures up to the last one!

THE FIGURE ITSELF

Spider-Gwen is the third figure in the Across the Spider-Verse tie-in assortment of Marvel Legends.  She’s one of three figures that are repeated characters from the movie, and arguably the least changed of the three in raw design terms.  It’s mostly just elements being shifted around a bit, just to give her a bit of a refresh.  The figure stands just shy of 6 inches tall and she has 29 points of articulation.  Gwen’s articulation scheme mimics the layout of Spot’s, which is again a slightly better set-up than we saw with Miles, as well as an improvement on the Gwen from the last movie.  Of note, she gets bicep swivels and double elbow joints.  Her arms are a bit on the thin side, so posing them is a slightly delicate affair, but it’s not as bad as I was expecting.  Gwen’s last animated figure was one of the two from the last round to make use of re-used parts, which slightly compromised her accuracy to the film.  This one, on the other hand, gets an all-new sculpt, which is more properly attuned to her look from the movie.  It’s a very basic and straight forward sculpt, but it does what it needs to, and it certainly looks the part.  I think I preferred the masked head on the last one, but the actual hood hangs more naturally here, and the build of the body is definitely more accurate this time around.  In terms of paint work, this Gwen, much like her predecessor, does suffer from just a bit of fuzziness in some spots, but for the most part it works out pretty well.  In particular, the detailing on the “webbed” parts of the costume turned out pretty nicely.  Gwen is packed with an alternate unmasked head, a corresponding pulled down hood piece, and two sets of hands.  As with others in the assortment, it’s perhaps a touch light, but at least it covers the basics.

THE ME HALF OF THE EQUATION

I wasn’t initially sold on this Gwen figure.  I really liked the last one, and with her design being less changed than others, I just wasn’t sure I needed to double-dip on her.  Ultimately, I decided I wanted a full set, so she just sort of came along for the ride.  I’m glad that’s the choice I made, because she’s all-new, and honestly a much nicer figure than I was expecting.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3373: Ultra Magnus

Posted by Ethan Wilson in Reviews and tagged with , , , ,

ULTRA MAGNUS

TRANSFORMERS: TITANIUM SERIES (HASBRO)

Hey, how about some Transformers?  Would that be good?  Would that be good for you guys?  Cool.  As is usually the case with Transformers reviews more recently here, we’re going back to the well of the two characters I put most of my focus on, Soundwave and Ultra Magnus. I’ll be focusing on the latter in particular for today’s review.  In particular, I’m jumping to the Titanium Series, a franchise-spanning banner that Hasbro ran under its Galoob arm from 2005 to 2007.  They had lines for Star Wars (which served largely as a replacement for Micro Machines), Marvel, and, of course, Transformers.  Transformers had two sub-lines running, a smaller non-transforming line called Robot Masters, and a larger transforming line called Cybertron Heroes.  The larger line had not one, but two Ultra Magnuses, the first of which I’m taking a look at today!

THE FIGURE ITSELF

Ultra Magnus was released in 2007 as one half of Wave 7 of the Cybertron Heroes sub-line of Transformers: Titanium Series.  He was based on his G1 design, specifically the fully armored-up version.  This was the first time that the armored look had been officially updated since the ’80s.  Furthermore, this was also the first time that a fully armored Magnus figure had no inner-bot mode.  In his robot mode, he stands about 6 inches tall and he has 14 workable points of articulation.  The articulation is a bit wonky.  The balljoints for the shoulders are kinda loose and tend to pop out of place a lot.  Also, due to a design flaw, the knees bend far more forward than they do backwards.  The rest of the articulation is generally limited at best, and, due to the metal portions of the figure and the weird tolerancing of the joints, he tends to be a bit floppy.  Like the articulation, the sculpt is also a bit wonky.  There’s odd spots of flatness, a lot of obvious joints, his arms are set way back, and there’s just a lot of weirdness to the whole thing.  There’s also the whole flip-up panel on the torso thing, which feels like it’s kind of a half-formed idea that never went anywhere.  Magnus’s paint work is at least pretty solid looking.  I dig the bright blue with the metallic finish.  It doesn’t all hold up super well, of course, so you do have to be careful about it.  Magnus included a blaster, two rockets, and a “stand” with his name on it.  The stand, of course, does nothing to actually support him, but I guess it looks sort of cool.  Magnus’s alt-mode is his classic car carrier mode.  Since he has no inner-bot, he transforms straight from the fully armored mode directly to his car carrier mode.  It’s not a super complex transformation, and it results in not a super complex alt-mode.  The basic skeleton is there, but it only barely tabs together.  It feels like more of an afterthought to the robot proper.  There’s a concept there, sure, but the execution is just not there.

THE ME HALF OF THE EQUATION

This review was very nearly an “I Blame Max” review.  As it is, it’s kind of an honorary one, I guess.  I wasn’t routinely collecting anything Transformers when this guy hit, so I didn’t get one new, even when they were kind of everywhere.  So, I was reliant on used ones.  Max had a damaged one in his big bin of mixed TF parts he was sorting through some years back, which he handed over to me to fill the spot in my collection, which he did for a few years.  However, a much nicer, more proper one was traded into All Time, and that’s the one I’ve got in the review here.  I’ll admit, he’s not a *ton* better, even when not damaged.  He’s a rough offering, like most of the Titanium figures.  But, he’s also a Magnus, and I’m hard pressed to truly dislike any of those.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3372: The Spot

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

THE SPOT

MARVEL LEGENDS (HASBRO)

“If The Spot can realize the power of his abilities, he could become a threat to the entire universe.”

The slightly quirkier tone of the Spider-Verse movies makes them great for deep dives into the Spider-Man mythos.  I largely comes in the form of lots of Spideys, but as the first film showcased, it’s also great for getting a focus on some slightly lower tier Spidey foes.  The first movie gave a particular focus to Prowler, and this one seems to be doing the same for the Spot, who looks to be the film’s main antagonist…maybe.  I’m writing this review pre-movie, so I can’t say for sure.  I’m just happy to be getting a Spot figure, honestly.

THE FIGURE ITSELF

The Spot is the second figure in the seven figure Across the Spider-Verse tie-in assortment of Marvel Legends.  He’s notably the only non-Spider in the set, and also the very first Marvel Legends Spot.  While some of the designs for the film are radical changes from the comics, the Spot actually sticks pretty close to his comics roots, albeit with the expected stylizing.  The figure stands just shy of 6 3/4 inches tall and he has 29 points of articulation.  Spot’s articulation is a slightly different set-up than we saw on Miles, and it’s better for it.  There’s still some slight issues with sticky joints on the limbs, and you have to be careful with moving the shoulders, lest they pop out at the biceps.  That said, I was especially impressed by the range of motion they managed to get into that mid-torso joint; it seems minimal at first, but once you get it working, it really does a lot.  The Spot’s sculpt is another all-new one, and it’s kind of the antithesis of Miles.  There’s very little actual detailing, making him largely a blank canvas, with the sculpting focus being placed on getting down his unique set of proportions.  It’s quite an effective set-up, with a quite distinctive silhouette, even without any extra key elements beyond the base body.  Despite the lankiness, the articulation is also worked in pretty cleanly as well, which is a definite plus.  Spot’s paint work is, like the sculpt, on the basic side.  It’s certainly effective, though.  It’s admittedly less spots than I’m used to, but that looks to be true to the film, so I’m hardly going to complain about that.  The Spot is packed with two sets of hands, in fists and open gesture, as well as two “spots”, one with Miles’ head sticking out, and the other with his hand.  There’s also a stand for clipping the spots onto, making for a pretty fun little set-up.  I would have liked to see some non-Miles-attached spots, but given the set-up for the rest of the figures, he still feels like he’s got enough to make it worthwhile.

THE ME HALF OF THE EQUATION

The Spot’s one of my favorite Spidey foes, going back to the ’90s cartoon, so I was actually pretty pumped when his inclusion in Across was announced, especially because I was pretty sure that would mean more toys…which it did.  Yay!  This guy was one of the first that images leaked for, and he’s definitely the one I was looking forward to the most.  My initial response after opening him was honestly just a touch let-down, but after getting to mess with him a little bit more, he’s grown on me, to about the point that I was expecting.  As it stands, he’s one of my top two for this set-up of figures.  I’d still love a comics version too, but this one’s a lot of fun on his own.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3369: Miles Morales

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

MILES MORALES

MARVEL LEGENDS (HASBRO)

“Miles Morales faces a new villain with abilities that will take more than one Spider-Man to defeat.”

When Spider-Man: Into The Spider-Verse was released in 2018, it hit with only minimal tie-in offerings, with the major push for tie-in stuff hitting about 2 1/2 years later.  Since it’s very clear what kind of a marketing success the first film was, the sequel is coming out of the gate strong for its theatrical release this week.  The basic figures have actually been out for the while, and there’s an entire dedicated assortment of Legends hitting right out of the gate, which snuck in real quietly right before the movie’s release.  I’ve got my whole set, because why the heck not.  I’m kicking off with a look at Miles today!

THE FIGURE ITSELF

Miles Morales is the first figure in the 7 figure Across the Spider-Verse tie-in assortment of Marvel Legends.  After getting the half-step “What’s Up Danger” look for the first film, this time around we get a fully-costumed Miles, sporting his brand new costume from the movie.  The figure stands about 6 inches tall and he has 30 points of articulation.  The articulation scheme this time around isn’t quite as impressive as what the Into Miles got; sure, he gets double elbows now, but he also loses the ball-jointed waist and neck, which really added to the prior figure’s posability.  This one can still pull off a good deal of poses, but the joints can get a little sticky, and it’s a little awkward to move him.  On the plus side, he’s still got the pinless construction, which works pretty well for the aesthetics.  Miles is sporting an all-new sculpt (courtesy of sculptor Dennis Chan), and it’s a good looking one.  It matches up nicely with what we’ve seen so far of the animation models, showcasing a Miles that’s a bit more grown up than the last time we saw him.  The texturing on the outfit is truly impressive, and there’s a nice flow to the overall sculpt.  Mile’s paint is more complex than it looks at first glance; obviously he gets the red accents on the black base, which looks nice and slick, but there’s also some subtle dark blue work.  It’s easy to miss, but it adds a little extra pop to the figure’s visual.  Miles is packed with an extra unmasked head and two sets of hands (thwipping and fists).  The last unmasked head didn’t *quite* land the film design, especially the hair, but this one really gets it down.  Also, they don’t have the weird ball joint for each head, so that’s a plus.  Of course, it’s still a smaller socket size than the standard, so swapping isn’t going to really be a thing, but it’s progress.  As with the last Miles, I do wish we’d gotten another set of hands with open gesture, but I’ll just have to continue to be disappointed with every Spider-Man that cuts those, I guess.

THE ME HALF OF THE EQUATION

I really enjoyed the Into tie-in Legends, and I’d been hoping for more since that one small release.  One of the things that excited me the most about the sequel was getting more figures.  Miles was a figure that I wasn’t quite as jazzed for on the outset, I think just because he seemed rather basic, at least from the in-hand leaks we saw.  Having him in hand, there are some smaller issues that I’m a little let-down by, but he’s overall a figure that I wound up liking a lot more than I’d expected to.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3366: Mandalorian Police Officer

Posted by Ethan Wilson in Reviews and tagged with , , ,

MANDALORIAN POLICE OFFICER

STAR WARS: THE CLONE WARS (HASBRO)

“Mandalorian officers maintain order on Mandalore. Because this planet of warriors has become a world of peace, the guards are seldom needed for more than minor issues. But the Death Watch group has begun committing acts of violence, so the officers are prepared with riot shields and weapons, in case all peaceful solutions fail.”

When Mandalorian culture was brought into Clone Wars‘ second season, there was a great focus on the divide in the two sides of Mandalore; while the antagonistic Death Watch were violent and warlike, the masses at large had attempted to take on a more peaceful stance.  The toys, of course, largely focused on the more visually exciting Death Watch side of things, but we did at least get some token coverage for the peace keepers, in the form of the Mandalorian Police Officer.  They’re ultimately a minor part of the show, but a cool look is a cool look, especially when it comes to Star Wars.

THE FIGURE ITSELF

The Mandalorian Police Officer is from the second wave of 2010 offerings for the Clone Wars tie-in line.  He’s figure #9 in that year’s line-up, making him the second figure in his assortment, following up the similarly-themed Pre Vizsla figure.  The figure stands about 3 3/4 inches tall and he has 14 points of articulation.  While the line was generally improving on the articulation front at this point, this guy doesn’t quite benefit from that.  Instead, he’s using the early line non-trooper articulation scheme, meaning he’s got decent movement on his arms, but only the basic hip movement, with no knee or ankle joints.  I suppose, given his more peaceful nature, that this isn’t as horribly limiting, but it’s a little bit of a bummer.  His sculpt was an all-new one, and one which would remain unique for this figure.  It’s generally pretty solid, capturing the knight-like design from the show rather well.  He’s a bit more angular and stylized than some of the line’s other figures, and his proportions look a little strange, especially with the arms being as long as they are relative to the other parts of the body.  The visor is also rather loose fitting, and doesn’t quite sit the way it’s supposed to when it’s down.  Beyond that, though, he does what he needs to.  His color work is more on the drab side; in the show, the police sported variations of grey (fitting the generally off-white colors of the peaceful Mandalorians), and that’s what we get here.  Application’s generally pretty good, and he looks like he should, which is the important thing.  The officer is packed with his baton and riot shield, as well as a missile launcher and missile, which can be mounted on the back of the shield.  There was also a display stand, as had become standard for the line at this point.

THE ME HALF OF THE EQUATION

This guy wasn’t my main want from this assortment back in the day (that was Pre Vizsla), but he was a close second.  I always thought this was a pretty cool design, and it’s a shame they never did too much with it.  I picked this figure up new, just before starting my freshman year of college.  He and Pre were two of the last items I got before moving into my dorm, and were in fact picked up while I was shopping for dorm stuff.  I intended to use these two to slow down my figure buying, but that…didn’t happen.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3363: Wicket

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

WICKET

STAR WARS: THE BLACK SERIES (HASBRO)

Isn’t it great how the Star Wars movies are all spaced out in such a way that you’re bound to be celebrating some sort of anniversary for them, almost every year?  The more recent theme on the Hasbro side has the been the 40th anniversaries of the Original Trilogy films, and up to bat this year is Return of the Jedi and its original 1983 release.  As with all the other 40th celebrations, Black Series is getting a couple of rounds of retro carded figures, which are a mix of old and new offerings.  There’s but one new offering in the very first of those assortments, and it’s one of those devilishly divisive Ewoks.  But it’s not just any Ewok: it’s Wicket!  He’s, like, the best one!

THE FIGURE ITSELF

Wicket was released alongside re-carded versions of Endor Leia, Endor Han, the Scout Trooper, and Skiff Guard Lando in the first series of the RotJ Retro Carded Black Series figures.  As noted in the intro, he’s the only unique figure this time around, and he’s our third Ewok in the line.  As the main Ewok, it’s a little surprising that it’s taken quite this long to release him, but he’s at least a good choice for an anniversary.  As of right now, he’s exclusive to the Retro Card, but it wouldn’t be that shocking to see him show up in the standard line later, as they’ve done with a few of the other anniversary figures.  The figure stands 3 inches tall and he has 20 points of articulation.  Given how small he is, he’s honestly got a pretty impressive articulation set-up.  The only major joint missing is the knee, but that would probably have broken the legs up too much, and it admittedly doesn’t mess with the movement too badly, due to the range on the hips and ankles.  Wicket’s sculpt is all-new, and it’s a very strong one.  He’s very small, of course, but that’s proper scaling for him, so it makes sense.  Even with his smaller stature, there’s a ton of texturing, and it’s got a great likeness of the Wicket costume from the movie.  The face in particular really captures the look of the character.  His hood is a separate piece, which can be removed if you’re so inclined, but it’s not really much to look at that way.  He just looks extra goofy.  But, it’s cool to have the option, and it stays in place very well.  Wicket’s paint work is pretty well handled, with accenting on his hood and his fur.  The fur jumps a bit in intensity from piece to piece, but the head is again the best work, with a rather subtle set-up, as well as gloss on the eyes that really helps to make they pop up against the rest of the face.  Wicket is packed with his spear, which is his signature weapon.  Presumably to make up for his smaller size while still occupying the standard price point, Wicket also gets a bow, an arrow, and two different styles of club.  They’re not things that he uses in the movie, but they’re good base Ewok weapons, and it’s not like he *couldn’t* have used them at some point, and it does give you extra options.

THE ME HALF OF THE EQUATION

Back when I was still operating under the delusion that I was only buying a very select run of figures from Black Series (in 2013, when the line first launched), Wicket was one of the figures on my list that I was definitely buying.  I assumed he’d be the first Ewok at the time, and also thought we’d be seeing him sooner than ten years into the line, but I knew I wanted him all the same.  In an otherwise kind of lack-luster launch wave for the 40th RotJ figures, Wicket was a pretty exciting figure, and in hand, I really dig him.  Sure, you’re paying full price for a figure that’s half the size, but there feels like an extra attention to detail on this one, and to me he feels like a better deal than Yoda and R2 were.  And he’s just a fun little guy.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3361: Pre Vizsla

Posted by Ethan Wilson in Reviews and tagged with , , , ,

PRE VIZSLA

STAR WARS: THE CLONE WARS (HASBRO)

“Pre Vizsla is governor of Concordia, the moon orbiting Mandalore. Vizsla appears to support peace and criticizes the Death Watch, a violent group of Mandalorians who want to return to their warrior past. But when Obi-Wan discovers the Vizsla is actually the leader of the Death Watch, the governor tries to silence the Jedi in a duel — darksaber to lightsaber.”

If you’re going to try recreating Boba Fett at regular intervals, I suppose sometimes it just pays to go back to the source.  In The Clone Wars‘ second season, that’s what the franchise did, giving mass audiences their first glimpse at the Mandalorians.  Oh, sure, it’s all very passé these days, since they now make up a very large chunk of the franchise’s offerings, but this was back before that, when we were just learning about it all.  Leading the villainous contingent of Mandalorians was Pre Vizsla, voiced by none other than Jon Favreau, who was not yet involved in Star Wars.  Oh how times have changed.

THE FIGURE ITSELF

Pre Vizsla was released in the second wave for the 2010 incarnation of Hasbro’s Clone Wars tie-in line, a wave which, in what would become fairly standard for the line, had been preceded by one entirely populated by repacks of main characters.  Vizsla was figure #8, making him the first of the new figures in his assortment, numerically.  The figure stands about 3 3/4 inches tall and he has 26 points of articulation.  Hasbro was getting pretty serious about actually articulating these figures by this point, and Pre represents the line at its peak in terms of mobility, rivaling the ARF Trooper, which was the best of the Clones.  It grants him quite a bit of playability, which is always a plus.  The figure’s sculpt was all-new; parts of it would be re-used for the standard Death Watch trooper later the same year, but for the start it would be unique.  It’s a pretty strong offering.  He’s notably skinnier than the clones, which was true to the character.  His helmet was a removable piece, with an unmasked sculpt beneath it.  The unmasked head is a touch on the small side, but not terribly so, and it matches up well with Vizsla’s earlier appearances on the show.  His half cape piece is cloth; it’s a little bit oversized for the scale, but it’s certainly a better set-up than a sculpted piece might have been, as it preserves the articulation.  Vizsla’s paint work is decent; the base set-up is all there, and he certainly captures the color scheme from the show.  You can see that they were intending the body to be re-used for standard Mandos from the start here, though; the Pre-specific elements are largely painted over the standard armor.  Pre is packed with the Dark Saber (making its toy debut here), as well as two dual pistols, and a display stand.

THE ME HALF OF THE EQUATION

By the time of Clone Wars‘ second season, I was actually starting to get a bit more invested in it, and I remember the trailer that showed off Vizsla and his Mando goons for the first time.  It was very cool, and I was very excited.  This figure was one of the ones I was most looking forward to from the line, and I recall getting both him and the Mandalorian Police Officer while I was out buying things for my first college dorm room.  They were meant to be my last toy purchase for a while but…uh, I didn’t stick to that for long.

#3358: Avalanche

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

AVALANCHE

MARVEL LEGENDS (HASBRO)

“Brotherhood of Mutants veteran Avalanche can generate powerful seismic waves from his hands.”

When the Brotherhood of Evil Mutants was reformed under Mystique’s leadership in the ’80s, they got a roster of characters with well-established traits, personalities, and arcs…and they also got Avalanche.  You know, the guy who was only ever really compelling on X-Men: Evolution, where the approach was essentially rebuilding him entirely from the ground up.  The guy whose backstory before joining the Brotherhood could be best summed up as “wasn’t in the Brotherhood yet.”  Essentially, he’s really just a glorified accessory for Pyro, a Brotherhood member who actually does things of note and whom people actually care about.  Honestly, he largely only gets figures to accent Pyro figures, too.  We got an updated Legends Pyro in 2020, so I guess we might as well get a proper Legends Avalanche.

THE FIGURE ITSELF

Avalanche is part of the latest retro-inspired X-Men series of Marvel Legends.  This is his first time getting an official Legends figure, though he was previously offered up in the scale in Toy Biz’s X-Men off-shoot line.  Like most of the assortment, he’s got a vintage 5-inch counterpart, with the caveat that Avalanche was in the X-Force line, not the main X-Men one.  The figure stands just shy of 7 inches tall and he has 32 points of articulation.  Avalanche uses the Reaper base body as a starting point.  It’s alright for the build, since he’s usually a little stockier, but the articulation’s rather stiff compared to more recent figures, and it’s still got the visible pins in the elbows and knees.  But, it’s just Avalanche we’re talking about here, so it’s not like it’s the end of the world.  Avalanche gets a new head, torso, forearms, and boots.  The head sculpt isn’t really doing it for me, honestly.  It’s a more recent take on his helmet design, with visible eyes, rather than the pupil-less look, and I just don’t think it works as well for the character.  Furthermore, the expression seems too neutral for what little characterization Avalanche has, which tends to see him as being rather brutish.  The body sculpt is alright.  I’ve seen complaints about how the shoulder pads stick out, but they don’t bug me.  The color work on the figure is almost entirely molded plastic, which works fine enough.  He gets a little bit of paint on the face, and I’m not crazy about the darker lips, but it’s other wise alright.  Avalanche is packed with two sets of hands, in fists and open gesture.  That seems rather light; it would have been nice to at least get an unmasked head, or possibly an alternate style of helmet.

THE ME HALF OF THE EQUATION

I can’t say I was incredibly compelled to get Avalanche, but I did already have Pyro, and he could do with a guy to stand behind him and make him look cooler by comparison.  Also, we’re getting close to wrapping up this incarnation of the Brotherhood, so team building and all that.  This figure isn’t bad, but he’s not terribly exciting either.  I’m not big on the choices with the head sculpt, and he feels kind of bland.  But he’s alright, I guess.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.