Tag Archives: Hasbro

#3678: Luke Skywalker – Snowspeeder Prototype Edition

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

LUKE SKYWALKER — SNOWSPEEDER PROTOTYPE EDITION

STAR WARS: RETRO COLLECTION (HASBRO)

“This Luke Skywalker is inspired by the colorful prototypes that enable the development team to look past the deco and focus on the sculpt, analyze mold alignment, and adjust for quality.”

During the action figure production process, there are a number of prototyping stages.  Once the sculpt is completed and has been tooled into a steel mold for the purposes of mass-production, the molds have to be tested to make sure they work properly.  Since you don’t want to use the plastic you’ve paid to use on final production for something that may or may not work and which will effectively be junked once the mold has been confirmed as properly working, factories will run these tests with whatever plastic they have left over from other jobs, often resulting in colorful results.  Over the years, some of the test run prototypes have surfaced, and they’re a fun little quirk of the process.  And, because it’s been determined that there’s money to be made in that particular quirk, Hasbro has jumped on mass-producing them.  Thus far, we’ve gotten six of them as part of the Star Wars: Retro Collection, and I’ve finally gotten one!  Huzzah!

THE FIGURE ITSELF

Luke Skywalker (Snowspeeder) Prototype Edition is a Target-exclusive offering for the Retro Collection, as all of the Prototype Editions have been thus far.  He arrived in January of 2023, and is the fifth of the six Prototype Edition releases.  The figure stands 3 3/4 inches tall and he has 5 points of articulation.  Obviously, all of the Prototype Edition figures are re-using a mold that Hasbro’s already got in production for the main Retro Collection line, but in Luke’s case, he’s notable for being a new, actual in-house Hasbro mold, rather than a recreation of an old Kenner one.  As there were no proper Snowspeeder pilots in the vintage line, Hasbro did a sizeable rework on the X-Wing Pilot Luke from Kenner’s vintage line, bulking him a bit to add the extra padding, as well as making sure he’s got the gloves, and the modified boots.  He also brings the helmet’s visor down over his eyes, as it was more frequently seen in the movie.  For color work, these figures have no paint, instead relying on a variety of different colors for each of the body parts.  There are actually six different variations of color layouts available, with the blue, red, green, yellow, purple, and orange each being applied to a different body part depending on the variant.  This one has blue for the head, red on the torso, orange on the right arm, green on the left arm, yellow on the right leg, and purple on the left leg.  He’s packed with his lightsaber (which is molded in the same color as the head, so it’s blue here) and his grapple.

THE ME HALF OF THE EQUATION

I’ve been low-key wanting one of these since Hasbro started doing them, but not enough to really go hunting for any of them.  Likewise, I kind of wanted this mold, but also not enough to track down its original release with the board game.  This guy landed in front of me, and that made the whole thing a lot easier.  He’s very definitely a novelty, and I don’t see myself going in for any more of them (well, maybe an IG-88 if they did him), but I do like having at least one of them.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3672: Death’s Head

Posted by Ethan Wilson in Reviews and tagged with , , , ,

DEATH’S HEAD

MARVEL LEGENDS (HASBRO)

In 2014, 27 years after the character’s creation, the toyline tie-in chat that’s not legally a toyline tie-in character Death’s Head finally got an action figure, courtesy of Hasbro’s late stages Marvel Universe scale. Just three years later, we got a Marvel Legends Death’s Head figure. Unfortunately, it was Death’s Head II, who’s emphatically not as cool. That figure sold pretty abysmally, and the name took a bit of a hit, hence the rather long wait to get the real Death’s Head as a proper Legends release. His final release is…well there’s some moving parts to how it all worked out, but here he is, and that’s the most important thing, yes?

THE FIGURE ITSELF

Death’s Head is a solo release for Marvel Legends. He was initially promoted as an exclusive for SDCC 2024, with a limited stock for Pulse after the con, but it seems Hasbro made more than expected, so after the scramble to get him, we all found out he’s actually a Fan Channel exclusive later in the fall, so the SDCC one was just kind of a preview? SDCC figures have seen re-releases in the past, but usually with some form of change, even if it’s just to the packaging. Not so this time. Speaking of packaging, this guy’s got a ’90s trading card-inspired box, a lot like Havok & Polaris and the Love Triangle set, which is a vibe I very much dig. The figure stands about 8 inches tall and he has 32 points of articulation. This figure’s construction uses the same approach as his smaller counterpart, reworking parts from this line’s version of Colossus. It was a good approach at the smaller scale, and it’s still a good approach here. The upper torso has been modified to cut the original shoulder pads shorter, and the upper legs have the knee joints switched to pinless (though the arms remain visibly pinned). He still gets a lot of new parts, including a new head and lower legs, and new overlay pieces for his cape, torso armor, and belt/skirt. I remain impressed by Hasbro’s ability to translate this look into figure form; the head is once again the spitting image of Death’s Head from the comics, and the textured details on the overlays are nicely implemented. I don’t like how the cape is so free-floating, which is actually my main complaint regarding the smaller one, so hooray for consistency! The color work here is alright. He’s not quite as metallic as the smaller figure, which is a little bit of a bummer. Also, I get just paining over some of the Colossus details for some of it, but I’m not sure why the sides of his tunic aren’t painted right at the ab-crunch. It’s like that on the prototype too, so that’s intentional. Weird. Otherwise, he’s very bright, and the application is pretty clean. Death’s Head is packed with two sets of hands (fists and an open gesture/gripping combo), his shield, and an axe, mace, and missile. The shield can be held or go on his back, and you can mount the weapons to the shield, or swap them out for Death’s Head’s hands.

THE ME HALF OF THE EQUATION

I have this fixation on Death’s Head that I can’t fully explain, but it’s just there. As a kid, I remember a CustomCon entry for Bruce Timm-Style Marvel Animated figures, which had a Death’s Head custom featured, and I’ve wanted him as a toy since. I loved the smaller figure, but he’s not my preferred scale, so I’ve been waiting patiently for this one. I wasn’t thrilled that he was going to be exclusive, but Max was kind enough to get me set-up with one as a birthday present. It’s not a perfect figure, but it’s a very, very cool one.

#3670: Superior Spider-Man

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SUPERIOR SPIDER-MAN

MARVEL LEGENDS (HASBRO)

Let’s go back to the beginning!  Okay, like, maybe the middle?  Post-intermission?  In 2014, after reviving Marvel Legends from its hiatus brought on by effectively running the line into the ground during their first go at things, Hasbro’s Return of Marvel Legends was losing steam, and they needed another angle.  That angle turned out to be mixing the comic assortments with movie tie-ins, under the Marvel Legends Infinite Series banner.  They launched with two sets, one based on Captain America: The Winter Soldier, and the other on Amazing Spider-Man 2.  The Spidey assortment’s comic Spidey was the still relatively recent Superior Spider-Man redesign, which I reviewed here when it was new….ten years ago.  A decade later, Superior Spider-Man got a brief revival in the comics, and is showing back up in Legends form, too!

THE FIGURE ITSELF

Superior Spider-Man is a single deluxe release Marvel Legends figure, under the “Celebrating 85 Years” banner.  He’s based on the second Superior look, which was his more unique, and ultimately more relevant design.  It wound up outliving the original run, with Otto wearing during the time displacements of “Spider-Verse”, and Peter himself wearing it during the recent Superior revival run.  The figure stands about 6 1/4 inches tall and he has 38 points of articulation.  SpOck re-uses the arms and legs from the Renew Your Vows body, which updates him to most of the modern articulation scheme.  He’s got a new head, torso, and pelvis, courtesy of sculptor Dennis Chan, which match well with the pre-existing stuff, though, for whatever reason, he’s back to the ab-crunch and cut waist, rather than a more modern articulation scheme.  He’s also got modified forearms, which add the gauntlets that were missing from the original release of this costume.  SpOck’s color work is honestly pretty solid.  The base work is pretty clean, and they’ve even got his rather uneven web-lining down alright.  One of the coolest parts, though, is the lenses on the default head, which simulate the reflective lenses from the comics by doing some printed detailing.  It’s quite dynamic, and makes for a very unique appearance next to the other Spideys.  The only issue I ran into on my figure is the presence of some errant red on one of his right hands.  SpOck’s main accessory is his back-pack, complete with…well, I don’t recall if they were actually called “waldoes” when Ock was using thing, but they’re the additional legs, and another major thing missing from the last figure.  Each of the legs gets 8 points of articulation, for a total of 32 points in addition to the 38 of the core body, bringing him up to a whopping 70 points.  They’re a little tricky to work with in some poses, but they’re strong enough to hold the figure aloft, which is really the most important thing.  SpOck is also packed with an extra head with white lenses (if you’re not into the artsier style), a compact back pack without the legs, and three pairs of hands (in fists, thwipping, and open clawed).  If I’m being extra demanding, I’d say I’d like an unmasked Otto as Peter head, like the Minimate version got, but there’s still plenty here.

THE ME HALF OF THE EQUATION

The prior Superior Spidey was decent for the time, especially with the line still really figuring out its first year in a new direction.  That said, it dried up pretty quickly in terms of distribution, and it also aged pretty quickly.  Add in the missing elements, and the fact that its been a decade since the original, and you’ve got an easy mark for a new offering.  This one’s not perfect, but he’s pretty solid, and definitely brings the look more in line with the more recent standard Spideys.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3668: Clone Captain Rex

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CLONE CAPTAIN REX

STAR WARS: THE VINTAGE COLLECTION (HASBRO)

Remember two weeks ago when I ended a lengthy hiatus from Vintage Collection with a review of a Bad Batch-based Captain Rex figure?  Did you know it was almost a review of a *different* Bad Batch-based Captain Rex figure from The Vintage Collection?  I mean, probably not.  I don’t tend to let other people know about my planned reviews in advance.  Anyway, there was the new Rex, so I hotplated him, but I didn’t want to just forget about the other one, so, two Rexes in one month?  Is that really so bad?  I don’t think so.

THE FIGURE ITSELF

Clone Captain Rex was released as part of the Amazon-exclusive Bad Batch-themed Star Wars: The Vintage Collection four-pack, alongside three other non-Batch troopers.  He’s numbered VC208, making him numerically the first of the four included figures.  He’s based on Rex’s incognito look from the show, just like his Black Series figure from the same time. The figure stands about 3 3/4 inches tall and he has 26 points of articulation.  Rex is built on the previous Clone Trooper base body, which was first introduced in 2011, and is…well, it certainly shows its age.  The articulation is the earliest implementation of “super-articulated” in its more modern sense.  There’s a lot of movement, but it’s not as intuitive, and it’s a little floppy.  He’s also rather lanky, made only more evident by the removable helmet, which bulks the head up.  He gets a new belt piece and pauldron, as well as a cloth kama and poncho.  The pauldron is a curious oddity, since it’s not the full thing, due to being based directly on the animation models, which had tweaked it so that it wouldn’t clip through the poncho.  It’s not actually meant to be seen, and was swapped out for the full version in all of the scenes without the poncho present.  The helmet is also tweaked to add his extra visor piece.  It’s articulated, but it’s also connected to the range finder, so they both move in tandem, which looks a little weird.  Under the helmet we get an unmasked head, which is just a standard clone head re-used, meaning it’s got too much hair to be Rex, since he had his close cropped hair still in Bad Batch.  The color work is decent enough.  Not too far removed from the more recent one, though the blue paint seems a little more wobbly.  There’s some slop on the hairline, but otherwise, application is decent and pretty clean.  Rex is packed with his twin blaster pistols, which he can hold or holster, as per usual.

THE ME HALF OF THE EQUATION

I like Rex a lot, but I wasn’t rushing out to buy three other figures just to get this one, especially because its a Vintage Collection release.  So, I opted to play the waiting game.  It worked out, because I was able to snag a loose one through All Time, when it was traded in a couple of months ago.  He’s a rather dated figure, and far moreso than he should be, given he’s only actually three years old.  But, he’s at least a more unique design, and he’s got the poncho to hide some of the worst of it.  Ultimately, it’s another Rex, and I can certainly dig that.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3662: Spider-Man & Wolverine – Fantastic Four

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SPIDER-MAN & WOLVERINE — FANTASTIC FOUR

MARVEL LEGENDS (HASBRO)

Though the emotional through line of the Fantastic Four is undoubtedly the core family of four, the team itself has been no stranger to line-up changes over the years. Perhaps the most drastic of those changes was “The New Fantastic Four”, a team quickly assembled when the original four were presumed dead.  Rather than leaning into the usual quirky second tier character set-up that FF replacements tended to be, the New FF was all heavy hitters, with a line-up comprised of Spider-Man, Wolverine, Ghost Rider, and the Hulk.  The concept’s been brought back a few times since, more recently during Dan Slott’s run on FF, where Franklin and Valeria need assistance defending the Earth while the main four are off-planet, and call in Spider-Man and Wolverine, who get snazzy new team uniforms for the set-up.  Super toyetic, right?

THE FIGURES THEMSELVES

Spider-Man and Wolverine are a Fan Channel-exclusive Marvel Legends two-pack, which just started hitting at the tail end of last month.  They seem to be loosely tied into the larger Wolverine anniversary celebration, though they’re slightly removed.  Both figures are based on their team suits as seen in Fantastic Four #21.

SPIDER-MAN

While Spidey’s gotten a few FF-related costumes previously, this marked his first time that got specifically a Fantastic Four design.  This one takes the usual Spidey costume layout, and mixes it with the inverted color scheme suit design the FF had earlier in the Slott run.  The figure stands 6 1/4 inches tall and has 34 points of articulation.  He’s built on the Amazing Fantasy body, which remains my favorite Spider-Man body that Hasbro has put out.  It’s just a really good base body, with balanced proportions and a really good range of motion on all of the articulation.  It’s a solid match for a more svelte Spidey, which is how he was depicted in the books.  The key selling point here is the new color scheme, which is heavy on the blue and black.  It matches with previously released Franklin and Valeria, and the application on the paint is all pretty cleanly handled.  Spidey is packed with four sets of hands, in fists, gripping, thwipping, and open gesture.

WOLVERINE

Wolverine’s ties to the FF are a little on the looser side, but he’s Wolverine, so, you know, he goes where he wants, I guess.  His costume design follows Spidey’s lead, also working in a bit of the classic brown costume, at least in terms of layout of the costume pieces.  The figure stands a little under 6 inches tall and he has 32 points of articulation. Wolverine is largely using the same bank of parts Wolverine has been using since the Juggernaut Series release. It’s not quite as slick as newer molds, but it gets the job done. Since this costume lacks Logan’s usual distinctive boot shape, he’s got the more basic shins from the Retro card black suit release, and he’s also using the slightly more modern claw shape from the X-Force costume. His color scheme matches Spidey, which means it also matches Franklin and Val, which is certainly a plus. The application is generally clean, with no real issues to speak of. Wolverine gets no extras, not even extra hands, which is a bit of a bummer.

THE ME HALF OF THE EQUATION

This set definitely falls into that category of “things you don’t know you want until they exist” for me. I read the issues where these looks appeared, and I enjoyed them, but I didn’t feel like I *needed* them. But, when they got shown off, and I already had Franklin and Val in-hand, I was a pretty easy mark. They’re not much to write home about, I suppose, since they’re just straight repaints of figures we’ve already got, but they’re still solid figures, and they’re sensible variants.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3660: Iron Fist & Luke Cage

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

IRON FIST & LUKE CAGE

MARVEL LEGENDS (HASBRO)

In the ’70s, Marvel attempted to jump on a number of different popularity trains, and amongst them were Kung-Fu and Blaxploitation, resulting in the creation of Iron Fist and Luke Cage, two wholly separate and unrelated characters, at least at their start.  However, as the decade moved on, both of the characters struggled on their own.  Marvel’s solution was to roll them both into the same book, creating the “Heroes for Hire” (pluralizing the title already previously granted to Cage on his own).  It was quite a successful move, and the characters have remained linked ever since.  The pairing’s been the source of quite a bit of toy coverage, including, most recently, Marvel Legends‘ celebration of Marvel’s 85th anniversary.

THE FIGURES THEMSELVES

Iron Fist and Luke Cage a two-pack Marvel Legends release, under the “Celebrating 85 Years” banner.  Interestingly, despite the pairing of the characters, this is the first time the two of them have been released together in two-pack form in the whole run of the line.  The closest we’ve gotten before this was the con-exclusive Netflix-based boxed set and the Amazon-exclusive comics boxed set that were both released to tie-in with Defenders, but those obviously through in the other characters as well.  Heck, prior to this, the singles of the characters had never even been in the same assortment!

IRON FIST

The second of Marvel’s Kung-Fu heroes, following Shang-Chi, Danny Rand aka Iron Fist is no stranger to Legends, getting his first and second figures both under Toy Biz’s run.  Under Hasbro, he’s had three figures, all of them in more recent costumes.  This one, however, returns to his original ’70s garb, which we haven’t seen since Toy Biz.  The figure stands 6 1/4 inches tall and he has 38 points of articulation.  Iron Fist uses the “Renew Your Vows” Spidey base body as a starting point, with two new heads, and a new upper and lower torso, and belt piece, all courtesy of sculptor Paul Harding.  The base body has a great range of motion, which makes for all sorts of great kung-fu posing.  The new parts vibe really well with the pre-existing pieces.  The new heads give us both calm and screaming options, which are both really strong, and they’ve even both got posable ties on the back of the mask.  The color work on this figure uses a lot of molded coloring, with a bit of paint work.  It’s clean, concise, and bold, and it very definitely works with the mold.  The figure is packed with four pairs of hands (fists, flat, and two different open palm gestures) and two different chi effect pieces.

LUKE CAGE

Luke actually just got the Legends treatment rather recently, with a ’70s based figure in the Mindless Ones assortment from the end of last year.  Of course, with a ’70s figure released that recently, that does sort of mean this one had to be a different look, so they’ve opted for a more modern Luke.  It’s not a terrible choice, but it does mean that the two figures don’t necessarily have the same vibe, since Danny’s very ’70s and Luke is…not.  The figure stands 7 inches tall and he has 34 points of articulation.  Luke is sporting an all-new sculpt courtesy of Rene Aldrete.  The body sculpt feels like it’s begging for re-use down the line, since it’s just a pretty basic t-shirt and jeans get-up.  There’s a ton of great texture work present, which really sells the more civilian aspect of Luke’s modern look.  It’s topped off by two new heads, which, much like Iron Fist, have calm and screaming expressions.  It’s a good mix, and seems to have a touch more character than the head we got from the ’70s Luke last year.  Color work for this figure is especially reliant on molded colors, which works surprisingly well.  There’s a little paint, mostly on the face and belt, which is handled very cleanly.  Luke is packed with two sets of hands, one in fists, the other in a gripping/open gesture combo.  The fists have brass knuckles, which read “LUKE” and “CAGE.”  They’re fun, but I’m also a bit surprised there’s not also standard fists without them.  It makes continuity between the poses a little confusing, since they’re not really set up for mix-and-matching the same way.

THE ME HALF OF THE EQUATION

I’ve been wanting an updated classic Iron Fist for quite a while, like even before we got the Luke Cage.  Then we got the Luke Cage, and I only wanted the Iron Fist update even more.  After getting Luke on his own, I wasn’t thrilled by the prospect of having to buy a two pack with yet another Luke to get the matching Iron Fist.  I still find it a little odd that they’d release them so close together, but not just do the full ’70s style two-pack.  But, whatever the case, this set’s a strong one.  The two figures may not quite match up as a pair, but they’re individually really strong figures.  Iron Fist winds up as the star piece for me, but I found myself liking the Luke a lot more than I’d expected to.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3658: Clone Commander Rex – Bracca Mission

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CLONE COMMANDER REX — BRACCA MISSION

STAR WARS: THE VINTAGE COLLECTION (HASBRO)

“Presumed dead at the dawn of the Empire, Rex operates in the shadows – helping any clone brothers who remain separate from the Imperial ranks.”

I haven’t reviewed a Vintage Collection figure since February of 2022, which is quite a while ago. To be fair, I haven’t bought any VC in that time either. I found myself experiencing diminishing returns as the price increased and the figures got more complex, but not so much more fun. But, well, there’s a new Rex, and he’s on my short list of characters that could get me to buy a VC figure. So, you know, that’s what happened. Thrilling, right? Well, let’s review this guy!

THE FIGURE ITSELF

Clone Commander Rex (Bracca Mission) is part of the latest assortment of Hasbro’s Star Wars: The Vintage Collection, which is a mid-summer release. He’s figure VC317, and officially hails from the Bad Batch sub-set of the line. I was intrigued by his “commander” rank, which he was granted during the Battle of Mandalore in Clone Wars, but which I’m also pretty sure Jesse stripped him of when Order 66 kicked in. I suppose with the whole Republic Army dismantled and the whole dying thing, Jesse may not have officially filed the necessary paperwork, so I guess Rex gets to keep the higher rank? It does at least help to further differentiate from the other two VC Rex figures (though one of those is *also* from Bad Batch, which just further confuses whether he kept the promotion or not).  The figure stands 3 3/4 inches tall and he has 26 points of articulation.  Rex’s largely built from the most recent revamp of the Clone Trooper body, introduced last year.  It’s a good starting point.  The articulation scheme here is more in line with where the larger scale was a few years ago, which is good for range and stability, especially at this scale.  I found it much easier to get him into poses and also keep him standing than typically is the case with Vintage Collection figures.  That’s a very welcome improvement.  He gets a new head sculpt, which is just the helmet.  It’s a good recreation of Rex’s modified helmet from later in the show, improving even on the earlier small-scale Black Series sculpt.  He also gets a new pauldron and belt.  The pauldron’s a little floaty for my taste, but the helmet at least helps keep in place in a lot of poses.  The belt also gets a fabric skirt piece, which is much better for posing than the sculpted one from the earlier Rex.  It sits a little odd on the front, but generally looks okay.  Rex’s color work isn’t too bad.  It’s more on the basic side, going for a cleaner Rex than we’ve seen previously.  We do still get his tally marks, since it’s a Phase II model, and they’re nice and clean.  I counted 161 this time, which is down by two from the smaller Black Series…I think.  I may have miscounted on one of them, though, so don’t quote me on it.  Rex is packed with an alternate unmasked head, as well as his twin blaster pistols.  The head does get his slight scar on the temple, indicating it’s a post-Order 66 Rex, as it’s meant to be.  It still looks a little weird to me to have him with the Morrison likeness, but it is what it is.

THE ME HALF OF THE EQUATION

Every time I’m tempted by a Vintage Collection figure, I try to remember that it’s generally not a line I’m super into, and that I don’t tend to enjoy the figures once I get them in hand.  As such, I wasn’t initially planning to grab this one.  I am, however, weak.  Once I saw him in person, I had a hard time saying no.  I felt like I was gonna regret it…but I actually don’t?  I don’t like the pauldron.  It’s floaty and the exact sort of thing that bugs me on this line.  That said, it’s a small thing, and the rest of the figure’s enough to offset it.  He’s actually a lot of fun, and a lot more sturdy than I expected.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3657: Ghost Rider

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

GHOST RIDER

MARVEL LEGENDS (HASBRO)

“When Danny Ketch crosses paths with a cursed motorcycle, he is transformed into a Spirit of Vengeance, wielding supernatural powers as Ghost Rider.”

I’ve only gotten 7 Ghost Rider reviews here on the site, and three of those are multipacks.  While there’s been a split between Ghost Rider’s various hosts, Johnny Blaze has definitely been the breakaway lead.  That said, I ended my last Ghost Rider review, way back in December of 2022, by asking if we could get a proper figure of Danny Ketch, the third main Ghost Rider, introduced in the ’90s.  I guess someone out there was listening.  Or, you know, in a less me-centric-view, they had to get around to him eventually, right?  He wasn’t part of the sadly rather small selection of 50th anniversary offerings for the character, but he *does* get to be part of another anniversary set-up, albeit a more overarching Marvel celebration.  You know what? Good for him.  So, let’s just go ahead and give ol’ Danny his due!

THE FIGURE ITSELF

Ghost Rider is a deluxe offering from Hasbro’s Marvel Legends, released under the “Celebrating 85 Years” banner.  He’s effectively an “Ultimate Riders” level offering, but they’ve discontinued that wider set-up, so he’s more of an on his own sort of thing.  This is *technically* Danny’s third time in Legends form, and *technically* his second in his classic attire.  Why “technically”?  Because his first Legends release, back in Series 3 of Toy Biz’s run, was identified as Johnny Blaze on the back of the box, despite clearly being Danny.  Still, it was clearly Danny, so we’re giving him the number on that technicality.  The figure stands 6 1/2 inches tall and he has 34 points of articulation.  The figure’s sculpt is largely new; the head and neck are the same ones that have been in use since the Rhino Series figure.  It’s honestly fair; what exactly are you going to do to reinvent a flaming skull sculpt?  It’s got that cool moving jaw too, which I definitely dig.  From the neck down, he’s all-new.  The articulation scheme is a lot of the same style of layout we saw on the prior mold, but it’s more refined, and a lot cleaner looking.  He also gets drop hips, which are super beneficial for riding poses.  In terms of the look, we’re finally moving away from the re-used AIM parts and their built-in ’70s stunt guy vibe.  This one’s got the proper ’90s bike update, as Ketch well should.  There’s a lot of small detail work, especially in terms of texturing.  His jacket and boots have the stippled leather detailing, and the pants even get all of the right stitching and seams.  All of the real edgelord-y stuff (the spikes and chains) is separately sculpted, which grants the whole set-up a lot more depth and sharpness.  The color work relies on this construction, with a lot more molded coloring than prior releases.  That’s not to say there’s not paint work; the head gets a fair bit of accenting, so that the skull looks like an actual skull.  He’s also got detailing for his eyes, which seem a touch low, but they still work.  Ghost Rider is packed with two sets of hands (gripping and an open gesture/fist combo) and the flaming chain piece from the last few Riders.

In addition to that, of course, he’s got the biggest extra: his cycle.  Danny’s version of the bike is drastically different from Johnny’s stuntcycle-inspired ride, opting for a far more “tough” design, at least as far as the ’90s were concerned.  It was particularly angular and boxy, something that this version captures well.  The old Toy Biz release was noted for having a somewhat diminutive bike, but this one is quite well scaled to the figure it’s packed with.  The bike also gets its own selection of extras. There are flaming effects for each of the wheels, allowing the bike to stand better on its own, and adapting the flaming wheels effect from the comics pretty nicely.  There’s also an attachment for keeping the bike up with one wheel in the air, which adds a lot of dynamic posing options to the set.

THE ME HALF OF THE EQUATION

I’ve got a bunch of Johnny Blaze Ghost Riders, which is cool, because I sure do love Johnny Blaze Ghost Rider.  But I also love Danny Ketch Ghost Rider.  And I have significantly less of those.  I want more, but I rarely get the opportunity.  I have very fond memories of getting that first Legends Ghost Rider, and I was hoping for a good update.  This is a good update.  For variety’s sake, I might have liked a new head, but seeing how literally everything else is new, I can’t really complain, especially when everything else about the figure works so very well.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3655: Lilandra Neramani

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

LILANDRA NERAMANI

MARVEL LEGENDS (HASBRO)

Just three issues into Chris Claremont and Dave Cockrum’s run on X-Men, readers were introduced to the Sh’iar via its first member, and eventual empress, Lilandra Neramani.  Lilandra would become a major recurring character through the Phoenix Saga, and in fact a notable recurring character for the X-universe as a whole.  She got a good focus on X-Men: The Animated Series, and even got a returning role in X-Men ’97 earlier this year.  Despite her prominent placement in the mythos, she’s not been exceedingly lucky with toy coverage.  She had a Minimate, but that’s effectively nothing these days.  Beyond that, she was relegated to just an extra head included with Mystique.  But no more!  No, now she’s getting real coverage!

THE FIGURE ITSELF

Lilandra Neramani was part of a Marvel Legends two-pack released earlier in the year.  The pack is inexplicably part of the Wolverine anniversary celebration, made slightly less weird by the inclusion of a Brood-Infected Wolverine as the other half of the set.  It’s still a little odd to pack Lilandra and Wolverine together, given they don’t exactly have much of a history, but then neither do Lilandra and Mystique, so maybe it’s just her thing?  She’s seen here in her armored attire, which is very Empress-y.  Doesn’t quite have the same nostalgic twinge for me as her original design, but that one’s also a little harder to sell as a toy, I feel.  The figure stands a little over 6 inches tall and she has 29 points of articulation.  Her sculpt uses some of the more standardized female buck parts, but she gets her fair share of new ones.  The most surprising new piece is the head, which isn’t a re-use of the Mystique piece as I’d expected it to be.  The detailing on this one is a little sharper and the shaping on the helmet is more in-line with her usual depictions.  The body sculpt gets a lot of character specific elements, rather than leaning into the painted detail side.  This is especially notable on the chest; those lines are actually etched in.  Her color work uses a lot of molded colors, but there’s a little bit of paint mixed in there as well.  The work on the face is particularly crisp.  Lilandra is packed with two sets of hands, in gripping and flat/fist pairs.  She’s also got her staff, which is a brand new sculpt.

THE ME HALF OF THE EQUATION

Since ’70s X-Men is my favorite era of X-Men, I’m always down for figures of the characters that originated there.  This set, however, presented me with a conundrum, since it paired Lilandra off with a decidedly ’80s Wolverine variant.  I thought about sticking with my Mystique head on Silver Sable body, but I did really like the more character-specific elements, and I thought I might be able to suffer through the Wolverine to get her.  I didn’t actually have to, though, because somebody who bought the set from All Time only wanted the Wolverine, so there was a spare Lilandra.  Well, not really, because it really meant there was a Lilandra for me.  She’s a solid figure.  I’d still love a first appearance version, but this one’s a good one to start with.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3652: Captain America – Symbol of Truth

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CAPTAIN AMERICA — SYMBOL OF TRUTH

MARVEL LEGENDS (HASBRO)

“Sam Wilson takes the mantle of Captain America to new heights, combining the iconic shield with his signature wings versus threats near and abroad.”

So, like, not to be that guy who critiques the bios again, but, umm, I’m gonna do exactly that, because there’s an irony to this particular Sam Wilson Cap figure calling out his use of the iconic shield, when, umm, this one doesn’t?  I mean, I guess the spirit of the thing is still there, right?  Sure, let’s go with that.

Shortly after introducing Sam Wilson as the Falcon in the MCU, the comics had Steve aged up and unable to keep Captaining, so Sam stepped into the role, a move that I always found sort of amusing given that, well, you’d only just introduced people to the Falcon identity, and then you immediately took it away from him.  Steve eventually took the title back, of course, and while they had a touch of overlap, Sam went back to being Falcon again…and then he got handed the shield in the MCU.  We had a while where Steve was the only Cap in the comics, while the MCU built up Sam, but somewhere along the way, someone had the bright idea to just let them both be Captain America for a while again, and thus Sam became the Cap with the sub-title “Symbol of Truth” (Steve for his part got to use his recurrent “Sentinel of Liberty” monicker).  Steve is currently back to being the main focus Cap at the moment, but Sam hasn’t reverted to Falcon, and with a Sam Cap movie just having dropped its trailer, it’s unlikely he’ll do that any time soon.

THE FIGURE ITSELF

Captain America – Symbol of Truth is a Target-exclusive Marvel Legends release.  He’s at the deluxe price-point, and started hitting retail right around the beginning of the summer.  It seems likely he was intended to tie-in with Brave New World‘s original intended release date, much like those McDonald’s toys we got, but as a comics figure, his placement is a little less weird, especially with this effectively being Sam’s evergreen look these days.  The figure stands about 6 1/2 inches tall and he has 36 points of articulation counting the wings.  By-and-large, this figure is a re-use of the Sam Cap figure from the three-pack in 2016, which was itself a re-tool of the Marvel Now Cap.  It’s a sculpt that wasn’t without its flaws at the time, but it’s honestly not bad, and it’s held up surprisingly well given the oldest parts of it are now a decade old.  It’s still got visible pins, of course, and I’m still not sure I love the head, though I’ve warmed to it a bit more in the eight years since its first release.  The primary change-up here is the presence of the wings; they were a rather glaring omission when the original figure dropped, and time hasn’t really lessened that.  This figure gets them as one separate wing-pack piece, which plugs into the peg hole already present on the back.  They’ve got 4 point of articulation, with a swivel at the base of the pack, and a hinge actually on the wings proper.  They’re a little rudimentary, but they get the job done, and we’ve certainly seen worse wings in this line.  Cap’s color scheme is also slightly changed up.  It’s nothing drastic, with the most notable shift being the switch to a brighter blue this time around, which gives him a little more pop.  The paint is also a little cleaner this time, largely because that’s just an area where Hasbro’s improved across the board.  Cap is packed with two sets of hands, the fist/gripping combo from the original mold, plus a right grip/left open gesture from last year’s Ultimate Cap.  The glove detailing isn’t an exact match, but it’s close enough to not really throw the whole look off either.  Cap is also packed with his shield, and yes, it’s very specifically Sam’s shield, since it’s got the new design from Symbol of Truth.  It’s using the tweaked Anniversary Cap shield mold that was also included with Ultimate Cap, which is by far the best version of the shield Hasbro’s had, and the new detailing looks really nice.

THE ME HALF OF THE EQUATION

Stop me if you’ve heard this before: I didn’t intend to get this figure.  I had my three-pack figure, who lacked the wings, and I had the MCU figure, who didn’t, so I figured my bases were covered.  What changed?  Well, Max found two of them at Target, and texted to ask if I wanted one.  Through a comedy of errors, I didn’t get back to him in time, but he didn’t want me to miss out, so he grabbed one just in case.  Once he’d bought it, I felt it would be rude to leave him out the cost of the second one, so I figured I might as well get one.  And you know what?  I’m glad I did.  The wing pack is fun, and I’m glad to have the new shield, and, heck, I even like the new shades to the coloring.  If I’ve already got all those Steve Caps, is it really that bad to have a few extra Sams as well?  I don’t really think so.