Tag Archives: Marvel

#0756: Cyclops & Mr. Sinister

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

CYCLOPS VS MR. SINISTER

X-MEN: STEEL MUTANTS

SinisterCyclops1

Last month, I took a look at one of Toy Biz’s many experiments with the Marvel license from the 90s, ­X-Men: Steel Mutants. They were a line of small scale versions of the X-Men, which featured a heavy dose of die-cast metal parts, hence the “Steel” part of the name. Toy Biz actually offered a pretty good selection of the X-Men in this line, including not one, but two versions of founding member Cyclops. Today, we’ll be looking at one of those, along with his pack-mate Mr. Sinister.

THE FIGURES THEMSELVES

Cyclops and Mr. Sinister were released in the second series of X-Men: Steel Mutants. Like all the others in the line, they work both as comic and cartoon versions of the characters.

CYCLOPS

SinisterCyclops2This is the second of the two Cyclopses released in this line. While Wolverine got three totally different looks for his three figures, Cyclops just gets a new pose. As opposed to the straight standing look, this one’s got a bit of a running start sort of a thing going. I guess that’s new and exciting. The figure stands roughly 2 ½ inches tall and has 4 points of articulation. Cyclops’s head and arms are plastic, and the torso and legs are metal, like all the other figures in the line. He uses the same head, torso, and left arm as the first Cyclops, along with a new right arm and legs, showing off that deep lunging thing he’s got going on. His sculpt, like that of the first Cyclops, is really a scaling down of the 5 inch Cyclops II figure. That was Toy Biz’s standard Cyclops, and it was a pretty good summation of the character, so it works. The torso’s a bit on the large side for Scott, but hey, it was the 90s, everybody was juicing. All in all, the figure’s pretty well detailed, and not terrible on the proportions, for the time at least. Cyclops’s deep stance makes him a little bit more difficult to keep standing than, say, Gambit, but not as much as you might think. Toy Biz clearly put a lot of effort into making sure these guys were properly balanced, which is good on their part. Cyclops’s paint work is decent for the scale, though there’s some noticeable slop on the changes from yellow to blue, which is slightly annoying. But, smaller details, such as the “X”s on his belt and chest harness are surprisingly clean, and the figure as a whole looks pretty good when viewed from a far.

MR. SINISTER

SinisterCyclops3Mr. Sinister is a pretty natural choice for this line, given his prominence in the cartoon, and he certainly makes sense packed with Cyclops, since they interacted a lot in both the comics and the cartoon. And, unlike Cyclops, this figure doesn’t feel redundant to anyone who had the first series of the line. Sinister was a new sculpt for the Steel Mutants line, though he was more or less just a scaled down version of the 5 inch Sinister from the main line, with the articulation scheme changed. Like that figure, this one feels a little on the small side for Sinister, who was usually depicted as being at least a little bigger than the average person. Aside from that, though, he does a pretty good job of capturing the character’s design. The cape is a separate, removable piece, made from plastic. It clips around the figure’s neck, and doesn’t quite sit right, but it’s close enough not to look too off at this scale. As far as paint goes, Sinister’s mostly painted in the same shade of dark blue, which seems to be a little thickly applied. The rest of the paint is pretty good, though he’s totally lacking Sinister’s usual facial hair. The prototype shows him sporting a full goatee, which is still not correct. Maybe the factory could only do goatee or clean shaven, with no in between? I suppose this would be the preferable choice in that case. There was actually a later single release of this figure that had the goatee, but never one with the character’s actual beard.

THE ME HALF OF THE EQUATION

Cyclops and Sinister were purchased for me by Super Awesome Girlfriend, when we visited Yesterday’s Fun this past summer. She recognized them as being from the same line as Gambit and Bishop and insisted on buying them for me. I actually had the later single releases of both of these figures, though I can’t say I know where they ended up. All in all, these are another fun little addition, and I’m happy to have them!

#0754: US Agent

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

US AGENT
IRON MAN (TOY BIZ)

USAgent1

Who’s up for a history lesson? Well, too bad, cuz I’m giving one anyway.

Let’s talk about US Agent. As a member of the West Coast Avengers, he was carried over into the reformation of the team, Force Works. Force Works had the luck of being relevant at the time of the 90s Iron Man cartoon, resulting in the team serving as Tony’s primary supporting cast for the first season of the show. US Agent, while a member in the comics, was never on the show. But, since the cartoon’s toyline was taking just as many cues from the comics as it was the cartoon itself, US Agent was slated to be released in the third series of the line. Unfortunately, he was cut from the line-up at the last minute, due to a change in the case pack-outs. His tooling was shelved, and later re-purposed for the proposed Living Laser figure in Series 5 of the same line. When that figure was also canceled, the body was re-re-purposed into the “Muntant” Armor version of Professor X. Then, in 1997, with no rhyme or reason, a slow trickle of US Agent figures began appearing from overseas. They were dubbed a “Limited Release” courtesy of Elegant Way, and were very quickly discovered to be unsanctioned by Marvel or Toy Biz. Some 10,000 units were produced before Toy Biz could halt production, but they did their best to make sure as few as possible made it to the US, ironically making US Agent exclusive to areas outside of the US, and quite a pricey commodity amongst US-based collectors. What does all this have to do with me? Well, in case you hadn’t figured it out, I got one.

THE FIGURE ITSELF

USAgent2US Agent was, as noted above, supposed to be released as part of Series 3 of the 90s Iron Man line. Ultimately, he ended up being released on his own, as an unsanctioned product, so this is effectively a bootleg. However, unlike most bootlegs, the quality of the figure seems to be about on par with the official figures. The figure stands 5 ¼ inches tall and he has 8 points of articulation. He only has elbow movement on his left arm, due to a spring-loaded feature being implemented on his right. I’ve actually reviewed most of this figure before, when I looked at Astral Projection Professor X. The right arm, upper left arm, and upper legs are identical between the two figures. The torso and lower legs are mostly the same, though the Professor X pieces had ports for armor add-ons, and the US Agent’s torso has an additional sculpted insignia on his torso. The left hand has a tighter grip on this figure, which is odd, since he doesn’t actually have anything to hold, but it looks fine. The end result is a body that is nearly indistinguishable from Professor X’s to the average viewer. The body’s not the greatest sculpt ever; that torso still looks wonky. That said, it does work a lot better for US Agent than it did Xavier, which makes sense, since US Agent was the character for whom it was intended. US Agent does have his own, totally unique head sculpt, which is cool. It’s not exceptional work or anything, but it is pretty nice, and it gives Walker an appropriately sneer-y expression, plus it sits well on the body. US Agent’s paint work is generally pretty good. Unsurprisingly for a guy named “US Agent,” he consists mostly of red, white, and blue. The blue is molded and the rest is painted on; the application is decent enough, though there’s some slop around the edges. The official prototype shots for US Agent showed him with black in place of the blue, but it’s not unlikely that Toy Biz themselves might have made this change before dropping the figure. US Agent included an energy shield (which has trouble staying in place, due to the spring feature), and one of the standard Iron Man line badges, though it does not have the usual character bio, presumably due to Toy Biz never writing one.

THE ME HALF OF THE EQUATION

Back in the 90s, when I was first getting into toy collecting, the Iron Man and Fantastic Four lines from Toy Biz were my jam. I got every figure I could, and I even saved the backs of the packaging so that I could cut out the small thumbnail images of all the other available figures. US Agent was one of the ones I remember having that little thumbnail for, but never being able to find. In those days, you didn’t have many ways of finding out about cancelled figures, so I just assumed he wasn’t out yet. It wasn’t until a little later, after discovering the awesome Iron Man Achive on Raving Toy Maniac, that I found out he never came to be. Then it was another several years or so before I found out he actually had come to be, but not in an easily attainable for a 10 year old sort of way. So, I was excited beyond belief when I came across a dealer at this year’s Baltimore Comic Con selling this guy loose, and not even for a small fortune. I’m really happy to finally have this guy, and to have finally completed my Series 3 collection!

USAgent3

#0752: Age of Ultron Minimates Boxed Set

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , , , , ,

FINAL FORM ULTRON, IRON LEGION 01, TONY STARK, MARK 45, & NICK FURY

MARVEL MINIMATES

AoUMatesBox1

So, Series 61 and 63 of Marvel Minimates, plus the two TRU exclusive sets and the blind bagged figures, did a pretty reasonable job of getting us just about every important character from Age of Ultron. We got the whole Avengers team, plus several Ultrons, a few Iron Legion drones, two minor villains, and the Hulkbuster. However, DST felt that wasn’t quite enough, so we’ve gotten an extra, special five figure (that’s a whole extra figure!) boxed set to fill a few holes in the collection.  Without further ado, let’s have a look at Final Form Ultron, Iron Legion 01, Tony Stark, Iron Man Mark 45, and Nick Fury!

THE FIGURES THEMSELVES

This set was one of the SDCC-exclusive sets offered by DST this year. The sets were then available at various retailers following the show.

FINAL FORM ULTRON

AoUMatesBox3Ultron looks a little….I don’t want to say puffy…  Yeah, so this is Ultron in his Vibranium infused body from the film’s big climactic battle, which is ever so slightly different from his main look for the rest of the movie. The figure is about 2 ½ inches tall and has 14 points of articulation. Ultron uses the base Minimate body, with non-standard pieces for the head, hands, and feet, as well as add-ons for the shoulders and torso extension. All of these pieces are re-used from prior figures; the head is from Ultron Prime, the hands originated on DC Minimates’ Cheetah, the feet are from Nightcrawler, and the add-ons are pieces we’ve seen on numerous prior ‘mates. It’s definitely a hodge-podge of pieces, but the end result actually looks pretty sleek. Also, he amends the issue of size that plagued Ultron Prime; he’s not huge, but he’s certainly got a level of imposing-ness to him. The paintwork on this figure is superb. The silver is nice and cleanly applied, the detail lines are nice and sharp, and he does a pretty great job of replicating the film design. Everything looks really great, and he’s even got a full set of detail lines on the normal arms under the bulked up shoulders. Ultron includes a spare set of normal hands and feet painted silver, for those that don’t want the more unique pieces, as well as a clear display stand.

IRON LEGION 01

AoUMatesBox6Okay, so if there’s one thing this set might have been okay without, it’s another Iron Legion drone. The blind bags ran into a bit of an issue by seriously over-packing drones 02 and 04, which kind of got us all down on the drones in general. That said, there are actually supposed to be five of these guys, and we only had two (three if you count the Ultron Mk 1 as drone 03), so I guess getting another of them isn’t the worst thing. Of course, if I were choosing one more, I’d probably go with 05, since you could include the scepter the drone steals, but DST went with 01. I guess having 01, 02, 03, and 04 is better than having 02, 03, 04, and 05. This figure is virtually identical to the other two drones we got (reviewed here). He’s a vanilla ‘mate, with a fair amount of painted details. Obviously, he’s got “01” in place of the preceding “02” and “04,” and he’s also got grey accents as opposed to the blue and black, respectively, of the other two.

TONY STARK

AoUMatesBox2Hey, it wouldn’t be the Avengers without another Tony Stark, right? The “trying to lift the hammer” sequence from AoU was definitely one of the more popular scenes from the movie, so it’s not a huge surprise to see Tony in his look from that scene. Tony has 5 sculpted add-on pieces for his hair, vest, tie, and rolled up sleeves. These are all pieces we’ve seen numerous times before, and they do a good job of capturing his look from the scene. His paint is pretty simple, with mostly base color work. The facial likeness somewhat resembles RDJ, though I don’t think it’s as good as some of DST’s other versions of the guy. It’s also a little bit too high set. Tony includes one of his Iron Man gauntlets (taken from the Mark 43), which is kind of key to the scene, as well as a spare set of arms and a jacket piece, and a clear display stand. It would have been cool to include Mjolnir here, but I can’t say this guy’s lacking for extras.

MARK 45

AoUMatesBox5We got the Mark 43, we got the Hulkbuster, and we got a basic Tony. What’s left? The Mark 45, Tony’s armor from the last fight scene. It’s only a little bit different from the Mark 43, but it’s still its own armor, and it continues the trend of each model streamlining the basic design just a bit more. Structurally, he’s just a basic ‘mate, with the helmet from the Mark 42/43. It’s not 100% accurate, but at this scale, it’s close enough. The paint is the important part here, and it’s handled quite nicely. The red and gold are distinctly different from each other, and they’re both nice and bright. The details of the suit are rendered pretty nicely on the body, and look pretty accurate to the source material. Under the helmet, there’s another Tony face, which is much angrier looking than the regular Tony. It looks even less like RDJ, but I much prefer a different expression that looks less like the actor than the same expression over and over again. The figure includes the same hairpiece included with the other Tony, as well as a flight stand, and a clear display stand.

NICK FURY

AoUMatesBox7At last! A character who wasn’t released in any of the other AoU assortments! Fury was originally slated to be one of the figures in the blind bagged assortment before being pulled from the lineup, so it’s not a huge shock to see him turn up here. The figure depicts Fury in his somewhat more distinct look from his earlier appearances in the film. He gets two add-on pieces for his hat and coat. The hat comes from the Amazing Spider-Man Vigilante Spider-Man, and the coat is from Punisher War-Zone’s Frank Castle. These parts match up pretty closely with the look from the film, and their well-sculpted in general, so that’s good. Fury’s paint is fairly simple. He’s got a fairly drab color scheme, with a bit of detailing for the belt, shirt, and face. The face doesn’t really look much like SLJ, but he’s a decent looking Fury. Also, I really like that the eye patch’s strap goes all the way around the head, even under the hat, though it’s a little frustrating that the head has a peg hole at the top for the hat. Fury includes a spare head with the eye patch removed, a handgun, and a clear display stand.

THE ME HALF OF THE EQUATION

Since I didn’t go to SDCC, I picked this set after the fact, courtesy of Luke’s Toy Store. This set doesn’t cover a whole lot of new ground, but it’s still a solid addition. Ultron is a significant improvement to Ultron Prime, Fury and Stark are both valid variants, and the Mark 45 and the Legion drone are decent enough. The final AoU line-up is pretty impressive!

AoUMatesBox9

#0747: Star-Lord & Groot (& Rocket)

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

STAR-LORD & GROOT (& ROCKET)

MARVEL MINIMATES

StarLordGroot1

Okay, let’s do this animated thing one more time! With the unexpectedly huge success of the Guardians of the Galaxy movie, it’s not exactly a big surprise that Disney fast tracked a cartoon series focusing on the team. It’s also not all that shocking that a few members of the show’s cast made their way into the new animated sub-set of Marvel Minimates. So, let’s have a look at Star-Lord and Groot (and Rocket Raccoon)!

THE FIGURES THEMSELVES

These guys are another set from the first series of Walgreens-exclusive Marvel Minimates. They’re based on their designs from the cartoon, which are, in turn, heavily influenced by the designs from the movie.

STAR-LORD

StarLordGroot2As the central figure of both the Guardians movie and the cartoon, it makes sense for Star-Lord to find himself in the first set of figures. The figure is about 2 ½ inches tall and he has 14 points of articulation. Star-Lord’s design on the show is more or less directly lifted from the movie, but, while almost all the movie merchandise (including the Minimate) was based on his long-jacketed look from the first few minutes of the film, the cartoon and its associated Minimate both depict him in the short-jacketed look he has for the majority of the film. So, it’s actually a new, valid variant of the character. Yay! Star-Lord gets add-ons for his hair/mask, coat, and wrist guard. The mask and wrist piece are both from the last Star-Lord, and the coat has been taken from Knight Rider’s Michael Knight. The coat and wrist thingy are fine, but the helmet still feels a bit too bulky. Maybe it would look better if the hair stood up a bit? The paint on Star-Lord is very nicely handled. The colors are nice and bold, and the line work is really clean. The finer details on the belt and boots are also pretty great, and the muscle detailing on the torso keeps him from being too boring. The mask is much better painted than the movie version, which ends up making it look quite a bit better. Under the mask is a fully detailed face, which fortunately didn’t suffer from the same paint mix-up as the movie version, so his eyebrows are the correct color. He’s definitely the animated Star-Lord, but he can pass for Chris Pratt in a pinch. Star-Lord is packed with a spare hairpiece (still re-used from Tomb Raider’s Roth, but it fits the animated design an bit better), one of his blasters, and a clear display stand. A second blaster would have been cool, but this is a pretty decent allotment overall!

GROOT (& ROCKET)

StarLordGroot3Star-Lord may be the central member of the team, but these two are definitely the fan favorites, so they definitely earned their slot here. Also, they were probably helped by the fact that they are identical to their movie counterparts tooling-wise. As with those figures, only one of these two, Groot, is actually a full-fleged figure. He’s got a specially sculpted head, hands, and feet, all re-used from the movie version, as well as a torso extender piece. The pieces were well done on the first Groot and they’re still well done here. I’m still not sold on the tabs on the back of Groot’s head to stand Rocket on, but they aren’t too noticeable, as long as you aren’t looking right at them. Groot’s paintwork is a lot more simplistic than his movie counterpart, which is much more in keeping with his animated design. He does a good job of capturing that look, though it’s nowhere near as interesting to look at. Still, his paint is nice and clean, so that’s good. Rocket is really just Groot’s accessory here. He’s the exact same unarticulated figure that was included with the movie Groot, with a very (and I mean veeeery) slight paint change. Instead of being yellow and black, he’s orange and black. That’s cool, I guess. The paint’s a little sloppier this time around, but not enormously so.

THE ME HALF OF THE EQUATION

Now, this is the set I was looking forward to when the sets were first announced. The movie Star-Lord was easily the biggest disappointment of that series, so it’s great that we got another shot at him, especially with this look. Groot and Rocket may be somewhat redundant, but Groot’s the most stylized of the animated ‘mates, so at least he’s a little different.

#0746: Captain America & Hulk

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

CAPTAIN AMERICA & HULK

MARVEL MINIMATES

CapHulk1

Yesterday, I looked at the first set of the new Walgreens exclusive Marvel Minimates, so why don’t I continue that trend today? The last two sets of animated-style ‘mates were both based on Ultimate Spider-Man. Today, I’ll be looking at the first set based on Avengers Assemble. My relationship with that show is…strained. I loved its predecessor Avengers: Earth’s Mightiest Heroes, which was canceled in favor of Assemble. That already put me off the show. What put me off more was the show’s first episode, which was…how do I put it? Horrendous. I tried to watch it on three separate occasions, and never could make it all the way through. So, I’ve not really caught the show. But now I have Minimates from it, so whatever. Let’s look at Captain America and the Hulk from that show.

THE FIGURES THEMSELVES

Captain America and the Hulk are part of the first series of Walgreens-exclusive Marvel Minimates. As noted above, both are based on their designs from the currently running Avengers Assemble cartoon, specifically from the first season.

CAPTAIN AMERICA

CapHulk2It’s not the Avengers without Captain America, so…ummm, here he is? Cap’s design on the show is more or less the same as his early Ultimates appearance, which itself is just a minor tweak of the classic Cap design. The figure stands roughly 2 ½ inches tall and he has the usual 14 points of articulation. He’s built on the standard Minimate body, with add-on pieces for his mask and belt, as well as a hand with a plug to attach his shield. The mask first showed up on the First Appearance X-Men, and it’s a good match for Cap’s look on the show. The belt looks familiar, but I can’t see where I’ve seen it before. It’s just a fairly straightforward belt with pouches, and it’s well-sculpted at that. The paintwork on Cap is pretty great. Everything’s clean, and the colors are somewhat muted, but very nicely handled. The detail line work is quite sharp, and effectively balances the animated design with the modern Minimate aesthetic. Cap includes his Mighty Shield TM, an extra head with a more light expression, a hair piece (snagged from Marty McFly), and a clear display stand.

HULK

CapHulk3So, this marks the 32nd time Hulk has made it into Minimate form. For a guy who’s spent 50 years in nothing but a pair of tattered pants, that’s pretty impressive. This one doesn’t really break from the norm, what with wearing nothing but a pair of tattered pants. But this time he’s a darker shade of green. Hey, that’s new and different right? Eh, it’s different enough. He’s got 11 add-on parts. It’s pretty much the same assortment of parts we’ve gotten on most of the Hulks since they started using the bulked up parts for Hulk. They work well, so I can’t really complain. If it ain’t broke, don’t fix it. Hulk’s paint is about on par with Cap’s, though it’s not as colorful. It’s generally pretty clean. There’s a bit of slop at the edges of the pants, but nothing unreasonable. The green could stand to be a little lighter, but it doesn’t clash with the pants or anything. Hulk is packed with an extra, smiling head, and a clear display stand.

THE ME HALF OF THE EQUATION

So, yeah, I got this set at Walgreens, of all places. Imagine that. I can’t say I was really anxious to get this set, given that I already have these two several times before. But, I was buying the other sets from the series, and this one looked pretty sharp, so I figured why not? It’s a pretty decent little set, so I’m glad I picked it up.

#0745: Spider-Man 2099 & Agent Venom

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

SPIDER-MAN 2099 & AGENT VENOM

MARVEL MINIMATES

Venom&2099a

So, on top of this whole bit with doing Minimates based on the various Marvel animated shows, DST is taking Minimates to another new place: Walgreens! Yep, Walgreens, our resident “out of left field” action figure distributor has picked up yet another line to carry, Marvel Minimates. That makes me happy, because hey, more Minimates to buy, but also sad because now I have to buy more Minimates. Oh well. I’ll get over it. The first set of Walgreens exclusive Minimates continue the animated Marvel trend, and while they haven’t yet gotten us any new characters (series 2 will change that) we have managed to get one very needed update, which I’ll be taking a look at today. Let’s see how Spider-Man 2099 and Agent Venom turned out, shall we?

THE FIGURES THEMSELVES

Spider-Man 2099 and Agent Venom were released in the first Walgreens-exclusive series of Marvel Minimates. Both figures are based upon the characters’ designs from Ultimate Spider-Man.

SPIDER-MAN 2099

Venom&2099cThis isn’t the first Spider-Man 2099 Minimate, but it is the first one in 11 years, so that’s pretty noteworthy. He definitely was high on a lot of lists for “most in need of an update.” And, 2099’s design in the cartoon is (mostly) the same as his comics design, so this one can work as either. The figure stands about 2 ¼ inches tall and has the standard 14 points of articulation. Structurally, he’s another “vanilla ‘mate,” so he’s just the base body. While that may work well for his regular time period counterpart, 2099 should really get a few extras. The last 2099 ‘mate was just the basic body too, and that was at least part of why so many people wanted an update. The animated 2099 ditches the cape of his comics counterpart, so its absence is excusable, and the arm spikes would have needed to be new pieces, so it’s possible they didn’t cost out, but he should have at least gotten a pair of clawed hands. Just to make him a little…different. On the plus side, the paintwork on this figure does its very best to make up for the lack of sculpted parts. The base blue is nice and dark, and the highlights add a nice bit of visual flare that was lacking from the previous 2099. Plus, the red details are also nice and sharp, and stand out nicely from the rest of the figure. Everything is really clean and very well handled, and he does a great job of balancing between animated and comic styles, so he’ll be right at home with either line. 2099 includes a web line (in blue) and a clear display stand.

AGENT VENOM

Venom&2099bIt hasn’t been nearly as long since Agent Venom’s last ‘mate (from the Venom Through the Ages set, for those curious), but he’s a popular enough character that it’s not much of a surprise to see him turn up again. Plus, given last year’s Marvel Legends exclusive, it would seem Walgreens is pretty fond of the guy. Agent Venom is built on the usual body, with add-ons for his chest piece, belt, boots, and gloves. The chest piece, boots and gloves are all the same pieces used on the previous Agent Venom. The belt was presumably deemed too textured for the animated design, so it was replaced with the belt from the Series 55 Classic Captain America. The pieces match up pretty well with the animated version of Flash Venom, so no issues there. This figure loses the extra mask piece and the leg holster of the last one; the mask was likely cut to streamline the design a bit, and the animated Agent Venom does not have the guns of his comics counterpart, and therefore doesn’t need the holster. The paintwork on Agent Venom is a bit different this time around. The animated design is just a bit different from the mainstream look, specifically on the mask. The eyes ditch the inverted Spider-Man design for something a bit more basic. It’s not as distinctive, but it’s accurate to the show. The figure has some pretty stylized shading, which is cleanly handled, and makes it more clear that this is an animated figure. Agent Venom’s one accessory is a clear display stand, which is a pretty big step down from the extra hairpiece and two weapons included with the boxed set version. I know the cartoon Agent Venom isn’t armed, but an extra unmasked head would have been nice.

THE ME HALF OF THE EQUATION

Take a guess where I got this set. If you guessed Walgreens, you were correct. Good for you. 2099 was definitely the main draw for me. I have a bit of nostalgia for the original, but he was very, very dated, so an update is much appreciated. Yes, it would have been nice to get a few extra sculpted parts, but the paintwork does a lot to save this guy. Agent Venom isn’t really exciting to me, but I have the boxed set version. While that’s the superior of the two, this one isn’t bad at all, and I’m sure he’s awesome to someone who wasn’t able to get the last one.

#0744: Spider-Man – Stealth Suit & Sandman

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SPIDER-MAN – STEALTH SUIT & SANDMAN

MARVEL MINIMATES

Sandman&Spidey1

After 63 series of Minimates based on Marvel characters from both the comics and the live action movies, DST has decided to mix things up a bit, introducing figures based on the current crop of Marvel cartoons. Generally speaking, that means a fair amount of repeats of the “heavy hitter” characters, but it also gives us a chance at some slightly more obscure characters and looks we might otherwise not get, which is always a plus. So, let’s take a look at my first set from this new breed of ‘mates, Spider-Man in his Stealth Suit and Sandman!

THE FIGURES THEMSELVES

This pair was released as part of the 20th Toys R Us Exclusive series of the main Marvel Minimates line. All the sets in this particular series are based on the Ultimate Spider-Man cartoon, and that includes these two.

SPIDER-MAN – STEALTH SUIT

Sandman&Spidey3Here’s the required Spider-Man. Oh boy. As noted in the name, this figure gives us Spidey in his SHIELD-issued stealth suit from the cartoon. Essentially, it’s just a clear Spider-Man Minimate. The figure is about 2 ½ inches tall and has 14 points of articulation. He uses the standard Minimate body, with no add-on pieces, which is pretty much par for the course with Spidey. My figure has a slight misshaping on the front of the head, which is a little bit noticeable, but not the worst thing ever. The paintwork on the figure is pretty straight-forward. He’s molded in clear plastic. All the detail lines are done in white, and the logo and eyes are done in grey. The line work is nice and clean, and matches up nicely with the standard Spidey from this wave. Spider-Man was packed with a strand of web, an extra torso showing his costume de-cloaking (which is a pretty fun piece) and a clear display stand.

SANDMAN

Sandman&Spidey2Sandman is definitely the main draw of this set. It’s not the first time we’ve gotten Flint Marko in Minimate form (we’ve actually had five before this one), but it’s the first time we’ve gotten him in something other than the striped shirt. The costume he’s wearing here is, obviously, his design from Ultimate Spider-Man, but it’s also a pretty close match for Flint’s Jack Kirby-designed costume from his time with the Frightful Four. This is actually the first time this design’s ever made it into toy-form, so that’s pretty sweet! Sandman has three add-on pieces for his collar, shoulder pads, and belt, as well as non-standard pieces for his arms and feet. The shoulder pads were last used on Series 60’s Avalanche, the belt is a fairly standard issue piece, the arms are the same as those on the last three Sandmen, and the feet were used on the GotG Groot ‘mate. The collar appears to be a new piece, but I’m not 100% sure on that. The end result is a decent match for the show/comic design, and looks pretty sharp in general. Sandman’s paint application is pretty darn great. The design of the costume has been handled very sharply, with some great geometric work, and the texturing on the sand parts is well-handled. His face is a little more simplistic than some recent ‘mates, due to his animated origins, but he shouldn’t stick out too much from regular Marvel Minimates. Sandman includes a spare set of normal arms and hands and a clear display stand.

THE ME HALF OF THE EQUATION

Hey, remember Force Friday? Where I went to Toys R Us at midnight in order to get the new Star Wars toys? Well, if there was one plus to that trip, it was that I found this set, so that’s cool. I never got into Ultimate Spider-Man, but I’m a sucker for classic Kirby designs, so I’m happy to have this version of Sandman, and thrilled that he’s so well-done to boot. Spidey’s not much more than package filler for me, but he’s not a bad ‘mate, and he’s certainly different from the Spider-Men we’ve gotten before.

#0743: Falcon as Captain America & Red Onslaught

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

FALCON as CAPTAIN AMERICA & RED ONSLAUGHT

MARVEL MINIMATES

Falcap&Redons1

Change is an interesting thing in comics. While big sweeping changes to the established rules are a near constant, it is, at its heart, a very status quo based medium. No matter how great the change, things will always even out in enough time. In the last decade Marvel and DC have both become very entrenched in doing their best to convince everyone that this change will be the one that sticks, before inevitably resetting everything back to where it was. Ultimately, Bruce Wayne will always be Batman again, Tony Stark will always be Iron Man again, Bruce Banner will always be the Hulk again, and Steve Rogers will always be Captain America again. But, it’s certainly okay to let others who take up those identities have their time to shine, especially if they’re a good fit, such as Sam Wilson, aka the Falcon, as the newest Captain America. I’ll be looking at the first official figure of him in the role today.

THE FIGURES THEMSELVES

Cap and Red Onslaught were released as part of Series 62 of Marvel Minimates. The whole series was based around the Axis cross-over event from last year. Yay.

FALCON as CAPTAIN AMERICA

Falcap&RedOns6Steve Rogers may have tons of Minimates under his belt, but this is only the third time Sam Wilson has made into ‘mate form. Here’s to lots more! As Captain America, Sam’s only actually had one look, so that’s the one DST’s gone with here. It’s actually a good merging of the Captain America and Falcon looks, and a pretty strong design all around, so I can’t really complain. Cap is built on the usual Minimate body, so he’s about 2 ½ inches tall and he has 14 points of articulation. He’s got 5 add-on pieces, used for his hair/goggles, harness, wings, and belt. These are all new pieces to this figure. They’re decently sculpted and accurate to the source material. The left wing has a peg to attach the shield, which is nice, but without an extra piece, it means that he’s permanently left with that pesky peg. Paint wise, Cap’s kind of a mix of good and bad. The colors are nice and bold, and the detail work is pretty sharp for the most part. However, the base color work is all over the place. Literally. He’s got a lot of slop and bleed over, especially on the mask piece. The overall figure looks alright, but that slop sure is annoying. Cap is packed with a spare hairpiece, his mighty shield, a pair of wristbands for a sans wings look, an extra wristband for use with the shield, a flight stand, and a clear display stand. That’s actually a pretty great assortment.

RED ONSLAUGHT

Falcap&RedOns3Red Onslaught. Oh, Red Onslaught. Let’s combine one of the most menacing Marvel villains with a literal walking Mega-Event. Brilliant. But hey, sales is sales. Plus, it means DST gets to reuse all those fancy parts they sculpted for the Series 50 Onslaught, so that’s a win for them. The figure makes use of 11 sculpted add-ons, all reused from the aforementioned Series 50 version. The parts are nicely sculpted, sharp looking, and they do a good job of bulking him up. Paint is where this guy really deviates from the series 50 counterpart. Where the 50 version was done up in metallic colors, this one is all flat colors, which make for a sufficiently different look. He’s also got the expected Red Skull detailing for the head, which is easily the best Red Skull we’ve gotten so far. The paintwork on the armor is good, but the real Falcap&RedOns4cool part here is what’s under the armor. He’s got a fully detailed Red Skull look underneath, which is certainly a cool touch. To aid with the alternate look, the figure has a black trench coat and a pair of black hands and feet, as well as an extra head and helmet to complete the Onslaught look, a cosmic cube holding hand, a bandaged stump (for Skull’s Uncanny Avengers look), and a clear display stand.

THE ME HALF OF THE EQUATION

So, I had no interest in Axis or any of its fallout, and as such wasn’t super excited by the prospect of a whole series of ‘mates based on the story. That said, I really like Falcon and the concept of him taking over Cap’s role is cool. The design translates very well to ‘mate form, even with its paint flaws. I was not initially enamored by having to buy Red Onslaught, but the extra Red Skull parts make the figure really worthwhile, especially since it’s the best ‘mate of the character so far. This is a really fantastic set, and I’m glad to have picked it up.

#0738: Hulkbuster

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , , ,

HULKBUSTER

MARVEL LEGENDS INFINITE SERIES

HulkbusterML1

If you’ve been keeping up with the last week of reviews, the focus of today’s review being the Hulkbuster really shouldn’t come as much of a shock to you.

So, umm, yeah. Hulkbuster! Whoooooo! That’s…well, not really new or different, or anything. Not that that’s a bad thing! Just, everybody and there mother’s been doing Hulkbuster figures recently (gee, I can’t imagine why…), so I’ve kinda run out of things to say about the armor. Let’s just get to the freaking review already!

THE FIGURE ITSELF

HulkbusterML2The Hulkbuster armor is the build-a-figure for the (appropriately named) “Hulkbuster Series” of the Avengers Marvel Legends Infinite Series line. This marks the second time that the Hulkbuster’s made into the Marvel Legends line, but it’s the first one in quite a while. He’s based on the design from Avengers: Age of Ultron, so he goes with that subset of Legends figures, though he also fits in just fine with the comic-based legends. The figure is 9 ¼ inches tall and has 31 points of articulation, which is pretty darn impressive for a figure this bulky. He also weighs a metric ton. No lightweight build-a-figure this time! Hulkbuster gets an all-new sculpt, and while it’s not Hot Toys level of detailing, it’s pretty great. Everything is nice and symmetrical, and they’ve done a pretty decent job of balancing the aesthetic of the sculpt with range of motion on the joints. As far as accuracy to what’s on the screen, he’s a little bit off. Not a lot, but enough to make it noticeable. In general, it seems Hasbro opted to give HulkbusterML4the suit a slightly more “heroic” build, broadening the shoulders, shrinking the head a bit, and lengthening the arms and legs. All minor nudges, but the end result is a bit different. Of course, it also ends up being something that looks more at home with the rest of the figures in this series, so I can see why they might tweak him. If there’s one area on this figure that has room for improvement, it’s the paint. Now, let me follow that up by saying that this figure’s paint is by no means bad. In fact, it’s actually pretty good for Hasbro. What’s there is bold and cleanly applied. It’s a good looking figure. However, the color palate is much too bright to be movie accurate (especially noticeable when this figure is placed next to the Mark 43) and the sculpt would very much benefit from a paintjob that does a better job of accentuating it. As is, it’s solid work, but with a better paint job it could be fantastic work.

THE ME HALF OF THE EQUATION

Yeah, so, umm, see that build-a-figure part up there? Wanna take a guess as to how I got mine? As soon as this guy was shown off, I knew I wanted one. None of the other Hulkbuster stuff really excited me, but this one did. The final figure may have its flaws, but, like I said, this is still a really solid figure. Both metaphorically and physically. Seriously, in event of my house getting broken into, forget the baseball bat, I’m grabbing this guy!

HulkbusterML3

#0737: Blizzard

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

BLIZZARD

MARVEL LEGENDS INFINITE SERIES

Blizzard1

Remember how I talked about Hasbro refusing to let a Marvel Legends prototype go unused? Well, guess what? Yep, today’s another of those figures! This one’s kind of special though, because he rounds out the famed “Jubilee Series” from before Legends’ switch to the Infinite Series branding. Last year’s TRU exclusive X-Men series got us the Jubilee Build-A-Figure, the holiday season Avengers three-pack gave us Radioactive Man, the Thanos series brought us Batroc, and the Ultron series threw in Tiger Shark, leaving just poor old Blizzard out in the cold. Fortunately, that didn’t last long, and now we’ve officially gotten every figure from the most impossible series of Marvel Legends ever thought up.*

THE FIGURE ITSELF

Blizzard2Blizzard (or “Marvel’s Blizzard” as he’s listed on the box) is the last single-release figure in the Hulkbuster series of the Avengers Marvel Legends Infinite Series figures. It’s interesting to note that he’s one of three figures in the series to get his own name on the box, which is a tad surprising, given that he’s freaking Blizzard. Not exactly a name that’s gonna get people lining up, but hey, I don’t mind. I’m just happy to have the figure! Blizzard stands about 6 ¼ inches tall and has 32 points of articulation. He’s built on the Bucky Cap body, which is a good fit, and he gets an all-new head sculpt. It’s not really anything groundbreaking, but it’s a pretty great sculpt of a dude in a full face mask. So, that’s cool. Most of what makes this figure Blizzard is paintwork, which is actually pretty great. They’ve gone with the design of the more recent Donny Gill version of the character. It’s not my favorite of the two looks, but it’s certainly not bad. This could have been a pretty bland paintjob, but Hasbro opted to make the blue metallic and the white pearlescent, which makes him look pretty darn spiffy! Also, it’s a minor thing, but it’s really great to see that they successfully matched the painted and molded plastic colors, so the figure doesn’t clash. A lot of figures don’t get that down, so I’m really happy this one did. Blizzard gets no character-specific accessories, which is a bit of a letdown, but he does get the upper torso of the Hulkbuster, so that kind of makes up for it!

THE ME HALF OF THE EQUATION

Blizzard is a figure I’ve been waiting for pretty much since he was originally announced. After getting the other three figures from the set, I was anxious to get him to finish up the group. He ended up being one of the four figures from this series I found at Walgreens, which was pretty cool. While I still think Valkyrie is the best figure in the series, I think I’d give this guy second best. He may not do much new, but he’s a pretty solid figure, and he’s got a fair bit of novelty to him.

*Seriously, can we address the Batman-level gambit that Hasbro played here? They legit showed off an entire series of villains who are at best C-list, with a Build-A-Figure of a has-been X-Man from the ‘90s (and a GIRL, no less). No big names, no special gimmicks. There was no way a retailer was gonna touch that line-up. But they showed it off at Toy Fair anyway, and built up all this pent-up fan demand for these literal nobodies, allowing them to slot every single one of those figures into a later assortment. The final scenario is literally the only case that any of these guys would have ever seen release. That’s damned impressive.

Blizzard3