Tag Archives: Marvel

#0530: Captain America

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

CAPTAIN AMERICA

MARVEL LEGENDS INFINITE SERIES

CapAoU1

We haven’t yet begun this year’s summer movie season, but it is fast approaching. The movie I’m most anticipating is May’s Avengers: Age of Ultron, which looks set to be a fantastic ride. Hasbro’s been steadily pumping out product in anticipation for the movie. Their 6-inch line started off with an assortment of exclusively comics based figures in Series 1, but Series 2 brings a few of the movie’s main players into the game (though still not freaking ULTRON!!! Sorry, I’m a bit impatient…) in true Legends style. First off, I’ll be taking a look at everyone’s favorite sentinel of liberty, Iron Patriot…no, sorry, Captain America!

THE FIGURE ITSELF

CapAoU2Captain America is part of Series 2 of Hasbro’s Avengers Marvel Legends Infinite Series. He’s one of three movie based figures in this particular series. The figure stands just over 6 inches tall, with 32 points of articulation. The figure is, of course, based upon Cap’s look from Age of Ultron, which appears to be a melding of the two costumes he had in The Winter Soldier. It feels like the closest we’ve gotten to the classic Cap design in the movies, so I’m a fan. If you feel like you’ve seen this figure before, that’s because you pretty much have, at least from a sculptural standpoint. Cap gets a new upper and lower torso, but other than that he’s a pretty straight re-use of the STRIKE Suit figure from the Winter Soldier line. This certainly isn’t a bad thing since a) the costume in the movie looks to use a lot of the same tailoring as the STRIKE suit, and b) the STRIKE suit figure had a pretty tremendous sculpt. All the texturing and fine details are still there and they still look really great. Also, it’s minor, but the belt has been glued in place on this figure, so it doesn’t rattle around like it did on the STRIKE suit Cap. The new torso matches up very well with the other parts, in style, size and texture, and it’s even a touch longer than the previous one, giving Cap some much needed additional height. Unfortunately, the paint is where the figure takes just a bit of a dip. From a general standpoint, it’s certainly passable, and better than that seen on Batroc the Leaper yesterday. However, it’s not quite up to the same level as STRIKE suit Cap, which makes the issues more noticeable. The colors are actually pretty well chosen, and he’s certainly more exciting to look at than CapAoU4the much more drab appearance of the last Cap. The biggest issue at play here is bleed over. Pretty much all of the base color work exhibits some form of it, which is really annoying. Also, the white on his lower torso isn’t consistent, letting the underlying blue plastic show through in a couple of spots. And to top it all off, the right eye on my figure is painted just off center, which makes Cap look just a tiny bit cross-eyed. Cap has pretty much the same accessory load out as the STRIKE figure: unmasked head, saluting hand, pointing hand, shield, and Thanos’ leg (subbing in for the Mandroid’s leg). The head, hands, and shield are all pretty much the same as the previous release. The head seems to have paint that’s just a touch better, and the shield is in the more traditional colors (which makes it look less over-sized, for some reason).

THE ME HALF OF THE EQUATION

Cap was purchased, along with the rest of Series 2, from Big Bad Toy Store. For the most part, I got him because I was getting the rest of the series, but I will admit to digging the new costume design. I definitely like the more traditional color scheme. The STRIKE suit Cap was one of Hasbro’s best Cap figures. This figure, making use of a lot of the same pieces, does pretty well. However, it’s really held back by the paint work. The level of detail just isn’t there this time, which is disappointing. Not enough to ruin the figure, but certainly enough to hold it back from being as great as it could have been. This figure should have overtaken the last movie Cap with ease, but instead the choice between the two comes down to personal preference of costume design. And that’s too bad.

CapAoU5

#0529: Batroc

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

BATROC

MARVEL LEGENDS INFINITE SERIES

Batroc1

Alright, before I get too far into the review, I want to set something straight. The name on the box of the figure I am reviewing today is “Batroc.” I’m not usually one to get too stuck on accuracy and such, but that’s just all wrong. This guy’s name is Batroc the Leaper; no more, no less. Without “the Leaper” he’s just some silly mustachioed French guy. With it, he’s some sill mustachioed French guy who leaps. It’s an important difference. Hasbro, who just seem to be firing on all cylinders when it comes to character selection, have seen fit to include Batroc the Leaper in their current round of Marvel Legends. As a good Batroc the Leaper fan, I very obviously had to pick him up!

THE FIGURE ITSELF

Batroc2Batroc the Leaper is part of the second series of Avengers Marvel Legends Infinite Series. Batroc the Leaper was originally shown as one of the figures set to be released before Marvel Legends was refitted into Infinite Series, but when his series never made it to stores, most assumed he wasn’t going to see the light of day. Fortunately, Hasbro seems dead-set on not letting any sculpts go to waste, so Batroc the Leaper found himself a home. The figure stands about 6 inches tall and he features 32 points of articulation. Batroc the Leaper is based upon the character’s classic design. He’s had a few other looks over the years, but none of them have really stuck around, so this was a good choice. As far as sculpting, Batroc the Leaper is a pretty formulaic approach. He uses the Bucky Cap body with a brand-new head. The Bucky Cap body is as good as always, and I’m happy to see Hasbro putting it to use where it’s appropriate. The head sculpt is one of Hasbro’s best Legends efforts to date. It’s got plenty of detail, and the features and expression are incredibly unique to the character. Some of Hasbro’s more recent Legends faces have suffered from strikingly similar features, but that’s not an issue here. Batroc the Leaper’s head sculpt is very definitely Batroc Batroc3the Leaper’s and no one else’s. Plus, get a load of that mustache! Lest you start fearing that Hasbro’s just gotten too good at this for their own… good, fear not, the figure is brought down from perfection by the paint. The paint isn’t the worst I’ve ever seen, but it’s really rough. The edges of the transitions from gold to purple are pretty fuzzy, the black line work, while clean, is worn off in several areas, the beard has flecks of skin tone showing through, and the white of the eyes and teeth is just missing in several places. Also, while the colors are generally pretty good, the small bit of purple on the front of the lower torso doesn’t match the purple everywhere else on the figure.  Batroc the Leaper’s only accessory is the Build-A-Figure piece, which, in this case, is the torso of Thanos. Yay?

THE ME HALF OF THE EQUATION

I preordered Batroc the Leaper through Amazon and, shockingly for an Amazon preorder, he actually arrived when I was expecting him to. Go figure. I’ve been anxiously awaiting Batroc the Leaper ever since the first prototype was shown a ways back, so I’m happy that he finally found his way to a release. The figure is hampered a bit by the paint apps, but the sculpt is strong enough that the figure isn’t a loss. Still, it would really be nice if Hasbro could work to improve the QC on paint apps. But, I can honestly say I never thought I’d be seeing Batroc the Leaper as a retail released figure, so I’m ecstatic to even have him.

*Want a Batroc figure of your own?  You Should!  He’s currently in-stock with our sponsors over at All Time Toys!  Click here to check him out!

Batroc4

#0528: Hawkeye

Posted by Ethan Wilson in Reviews and tagged with , , , ,

HAWKEYE

MARVEL SELECT

HawkeyeMS1

Man, who’d have guessed that good ol’ “Hawk-guy” here would become a household name. Not me, that’s for sure. I mean, sure, the guy’s the quintessential Avenger, but Hawkeye? All that said, I can’t say I’m all that upset about the character getting some recognition. He’s always been one of my favorite characters. And, as everyone knows, more recognition means more merchandise, which totally includes action figures! So, let’s have a look at this here Hawkeye figure!

THE FIGURE ITSELF

HawkeyeMS2Hawkeye is the latest release in Diamond Select Toys’ Marvel Select line. The figure is currently exclusive to the Disney Store (as well as Marvel’s online shop) but that may or may not stick. Amazingly enough, this is actually Hawkeye’s third figure in this line; so far he’s had one movie figure and one comics figure. The last comic based figure was a more classically inspired take on the character, whereas this figure represents Hawkeye in his current costume. Hawkeye stands a little over 7 inches tall and he has 32 points of articulation. The figure sports a brand-new sculpt. In the past, Select figure sculpts can have a tendency to be …uneven. I’m happy to say that isn’t the case here. From top to bottom, this sculpt is fantastically handled. Hawkeye is clearly based upon the illustrations of David Aja, who was the primary penciller on the last Hawkeye series. Aja has a rather distinctive style. It’s minimal on heavy detail work, but it has a lot of character. This sculpt manages to translate Aja’s work to three dimensions without making Hawkeye look out of place with the rest of the Select figures, which is an incredible balance. The figure features two head sculpts: one with sunglasses and one without. Unlike the recent Marvel Legends Coulson, these are two completely unique sculpts. The sunglass-ed head seems to be the most “default” of the two, though it’s also the weaker piece. The expression is a little on the bland side, and it lacks the Aja-style of the rest of the piece. It’s still a great piece of work from a technical standpoint, though. The second head features a more battered and bruised Clint Barton. Over the course of Fraction and Aja’s run on the series, poor Clint takes quite a beating, and this sculpt represents that really well. It also sports an expression with just the right amount of smarm for the character. As great as the rest of the sculpt is, it’s hard to beat this particular piece. Of course, a good sculpt still needs quality paintwork. Fortunately, this figure mostly delivers on that front. While there are a few spots of misaligned paint (particularly on the sunglass-ed head), but the base work is generally pretty clean. The costume also features some pretty neat weathering to add a little texture, and it looks really great. Hawkeye is accessorized with his signature bow, six arrows of varying styles, an extra right hand, a two piece crossbow, and, best of all, Hawkeye’s pet dog Lucky, aka Pizza Dog. The bow is cool enough, given its rather straight forward nature. The arrows are well sculpted, but since neither of his quivers can hold them, they just sort of get shunted to the side. The crossbow is suitable, but none of his hands really hold it all that well. Pizza Dog is a really cool piece, especially given the importance of the character in Fraction and Aja’s run. He’s pretty well sculpted and painted, with one glaring issue: he’s got two eyes where Pizza Dog only should have one. I guess this is a pre-adoption Pizza Dog.

HawkeyeMS4 HawkeyeMS5

THE ME HALF OF THE EQUATION

Hawkeye marks the second of a new method of release for Marvel Select, where the figure just shows up at Disney Stores, with little build up, sort of as a surprise. The first was Thor, who I passed on without much thought. But then came Hawkeye. I love the character, I love the run this figure’s based on. How could I not buy it. So, when it was listed on the Marvel Shop, I caved and bought it. Yay me. This is a pretty big statement, but this figure puts every other Marvel Select figure to shame. The sculpt is there, the paint is there, and the accessories are there. This is a phenomenal figure, through and through.

HawkeyeMS3

#0527: Green Goblin

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

GREEN GOBLIN

SPIDER-MAN (TOYBIZ)

Alright guys, after a brief stop over into the strange bizzaro world of The Stapler in Question, we are back at home with the action figures. Yay! So, back in the 90s, the 5-inch scale Marvel figures, produced by the very much at the height of their game ToyBiz were totally my jam. The figures were (at least loosely) based on the then current cartoons. Amongst those cartoons was Spider-Man: The Animated Series, which ended up with a fairly nice toyline of its own, at least for a few series. So, let’s have a look at one of Spidey’s greatest foes, the Green Goblin, as he was presented in said line.

THE FIGURE ITSELF

GreenGoblin90sWilsonGreen Goblin was released as part of Series 3 of ToyBiz’s Spider-Man line. The cartoon did this odd thing where Hobgoblin preceded Green Goblin, which resulted in Hobs taking the Goblin slot in Series 1. And Goblins never go for even numbered series. That’s just not how they roll. The figure is about 5 inches tall, with 9 points of articulation. He’s pretty much standard for a ToyBiz figure of the time. He’s based on the character’s animated appearance, which itself was a fairly faithful recreation of the comics design. Mostly, it just comes down to style cues, resulting in a slightly “friendlier” looking Goblin. Surprisingly, Green Goblin got his own sculpt, which shared no pieces with Series 1’s Hobgoblin. I think that may be the only time these two have both appeared in a line with no re-use at all. Impressive. The sculpt itself ends up being quite impressive, with not only some pretty good proportions, but also some killer texturing, especially on the scaly arms and legs. They aren’t super-detailed like some of the sculpts that followed, but they are a great example of using just enough detail to suggest the rest (which, incidentally, is how Goblin was drawn for most of his classic appearances). Also, it’s an odd thing to point out, but this figure has some of the best hand sculpts of any figure from this time. Most were molded in a generic clasping positon, but Goblin has one splayed as if it’s just thrown a pumpkin bomb and one in a pointing position. I don’t know what he’s pointing at, but at least it’s different. Goblin’s paintwork isn’t quite up to the same level as the sculpt, but it’s pretty much on par with just about everything else being offered at the time. The colors match up pretty well to the show’s design. The colors don’t so much match up to themselves, however. The purple ends up changing a few times over the course of the figure, which is rather distracting. There is also some rather noticeable bleed over around the edges of the gloves and boots, and the edges on the shorts aren’t even close to being even. Green Goblin included his faithful goblin glider (which even launched missiles) and a pumpkin, but pesky child-Ethan lost them! (Or did he?)

THE ME HALF OF THE EQUATION

As into the ToyBiz Marvel stuff as I was as a kid, I actually ended up avoiding a lot of the Spider-Man line. The cartoon never really gripped me like the others, so I just never really had the connection. So, Goblin here wasn’t part of my “initial collection.” He was a later acquisition, fished out of a bin of low priced figures at a nearby comic book store sometime around the mid-00s. I don’t know exactly why I picked him up, but I imagine I was just filling in some gaps in the collection at low prices. Going back to review this guy, he surprised me. With most of the 5-inch figures, the nostalgia filter is firmly in place, but not for this one, and yet he still impressed me. That really says something.

#0524: Agents of SHIELD

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

AGENT COULSON, NICK FURY, & MARIA HILL

MARVEL LEGENDS INFINITE SERIES

AgentsOfShield1

After a few years of treading water and treating the line as second best, Hasbro has really turned things around with Marvel Legends. It seems the 6 inch scale is here to stay, and the 3 ¾ inch scale is on its way out (for Marvel, anyway). One of the things that helped Hasbro to build a successful line is partnering with big retail stores to offer exclusive figures, allowing them to up the number of characters released in a given year. So, let’s have a look at their latest exclusive set, the Agents of SHIELD set!

THE FIGURES THEMSELVES

This three-pack, consisting of Agent Coulson, Nick Fury, and Maria Hill, was released exclusively through Toys R Us (and eBay!) just in the last few weeks. Though the set is named “Agents of SHIELD” it’s not really based on the show (although all three characters present here have been on the show). All three of these figures present the characters as they were seen in 2012’s Avengers. So, these guys might be just a little late to the party, but we’ll let them slide.

AGENT COULSON

AgentsofShield2Yes, his first name is very definitely Agent. Coulson is really the main draw of this set, for a few reasons. First off, there’s that whole “Son of Coul,” most popular character in the MCU thing he’s got going for him. I don’t think anyone would have guessed that was going to happen to the bit part guy from the first Iron Man movie, but holy crap did it ever. The second, more toy-geek centric thing is that Coulson is also the first character to make use of Hasbro’s new suit body, which lots of people are excited about. Anyway, the figure is about 6 inches tall and he’s got 30 points of articulation. That’s a lot of articulation for a guy in a suit, but, aside from his elbows being a touch low, it works out really well. Coulson’s sculpt is all-new from head to toe. The suit body is definitely a strong sculpt. With something like a suit, finding a good balance between movement and sculpt can be tricky, but Hasbro’s done admirably here. The articulation all flows with the sculpt, and the sculpt maintains a great level of detail. The suit has all the proper fold, creases and even the stitching you’d expect from the real deal. He’s even got a proper crease at the front of his legs; Coulson does not let his pants go un-ironed! The hands feature a great level of detail, and work well with the included accessory, so that’s great too. Coulson has two head sculpts included: with or without sunglasses. He comes wearing the “without” head, which has a pretty decent likeness of Clark Gregg. It’s just a tiny bit off, but how much of that is sculpt and how much is paint is hard to tell. The “with” head is the same as the “without,” but with the addition of the sunglasses. The head ends up being the stronger of the two, and the likeness looks pretty much spot-on. As far as paintwork goes, Coulson ends up being mostly straightforward; the suit is molded in black, the shirt is molded in white, and the hands and head are molded in flesh-tone. The paint is mostly on the face and tie. The tie is pretty nicely done, with nice, clean, straight lines. The sunglass-ed head is pretty decent, but the one without has some slightly wonky eyes and eyebrows. Coulson comes packed with the extra head and, best of all, the Destroyer gun, which fits perfectly in the figure’s hands.

NICK FURY

AgentsofShield4Fury here is kind of the requisite “re-issue” of the set, sort of filling the same slot as Cap in the Avengers set. We’ve essentially seen this figure twice before, although there are a few small differences here and there. The figure is just a little taller (though not as much taller as he should be) than Coulson and features 31 points of articulation. Fury makes use of Hasbro’s trench coat body, which was originally sculpted for the Ultimate Nick Fury several years ago. It’s an okay looking body, but the poseability isn’t really up to par, especially when compared to newer offerings. A basic standing pose is fairly attainable, but the biggest issue is easily the shoulders, which can’t get any closer to his sides than about a 45 degree angle. Fury specifically makes use of the Red Skull version of this particular body, which had newly tooled hands and lower legs. The new pieces end up being rather detrimental to Fury. The feet were designed to shorten the body, robbing him of the appropriate height, and the hands have been designed to fit the more meglomaniacal Skull. In particular, his left hand, which was sculpted to hold the Cosmic Cube, makes little sense for Fury. Topping it all off is the head sculpt, which appears to be the same piece used on the version of the character from the Walmart-exclusive First Avenger line. It’s a decent piece, with a good likeness of Samuel L Jackson, so that’s good. The figure’s paint is fairly basic, but good nonetheless. He’s mostly just molded in black plastic, with a few small silver and shiny black details here and there to keep things interesting. The head does have a slightly crazy eye thing going on, but it’s not as bad as some Hasbro figures. Fury includes two small handguns, deco-ed to look like the “night-night” guns from Agents of SHIELD.

MARIA HILL

AgentsofShield5The other new piece of this set is Maria Hill. Hill’s comic incarnation got a figure a few years back, but this is the first time Hasbro’s tackled the MCU version. Hill is just shy of 6 inches tall and she sports 26 points of articulation. Like Fury, Hill seems a little on the short side, due to parts re-use. Hill’s sculpt makes use of the legs and upper arms from last year’s Black Widow figure, along with an all-new head, torso, lower arms, and hands. I really liked the Widow figure, but I think that was a “whole is better than the sum of the parts” situation. The individual parts don’t hold up quite as well, and the legs in particular just don’t work quite as well here. The new pieces are okay, but not fantastic. The torso is probably the best. It’s nicely proportioned and decently textured. The head is okay, but it’s too large, and it has some very strange proportions when viewed from any angle but head-on. The likeness isn’t too bad, but it feels more like a caricature of Colby Smolders than a proper likeness. The hands end up being the worst piece of the sculpt. The right’s not bad, but the left is in a fist for some reason, and it’s not even a well-sculpted fist at that. The paintwork on Hill is probably the best of the lot. There’s actually a fair bit of detail and layering. The logos on the shoulders are nice an sharp, and the head manages to avoid any of the wonky eye issues. Hill includes no accessories, which is really annoying. Fury has two guns, so you can give her one of those if you want, but there really should have been enough of those to go around.

THE ME HALF OF THE EQUATION

Well, feel free to take a guess as to where I acquired this Toys R Us exclusive set. Okay, I didn’t actually get this at a physical TRU location, I ordered it online. And I even had a pleasant experience. Shocking, isn’t it? I, like most people, bought this set for Coulson. For that purpose, the set lives up to expectations. Coulson is the star attraction here. He’s got the best pieces, the best likeness, and the best accessories. Fury ends up being the set’s weakest link, mostly due to the choice of body, and Hill falls somewhere in between the two, but probably closer to Fury than Coulson. All in all, it’s a decent set, and I can’t really ask for much more from Hasbro.

AgentsofShield3

#0520: The Beast

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

THE BEAST

AVENGERS INFINITE

GreyBeast1

So, here’s a fact a few people reading probably don’t know: though he debuted and has been a prominent member of the X-Men, the first real bit of notoriety gained by Hank McCoy, aka the Beast, was his admission into the Avengers in Avengers #137. Since then, he’s kind of pin-balled back and forth between the two teams. Due to licensing and such with Fox, he’s generally paired up with the X-Men for merchandising, so most people think of him with them. I myself actually prefer him with the Avengers, but that’s just me. Anyway, Beast just wound up with not one but two new figures in Hasbro’s Avengers Infinite line, and I picked one of them up. Let’s see how he turned out.

THE FIGURE ITSELF

GreyBeast2Beast (or “Marvel’s Beast” as he’s listed on the package) was released in the 5th Series of Hasbro’s Avengers Infinite line. The packaging seems to be exclusively referring to this line as “Marvel Infinite” and the character selection is actually pretty sparse on true Avengers figures, but Hasbro seems pretty dead set that the actual name of the line is Avengers Infinite. They know best, so I’m just gonna trust them. The figure is roughly 4 inches tall, with 19 points of articulation. The figure lacks wrist and waist articulation, with is rather annoying, especially for a character like Beast. It seems Hasbro is trying to cut down articulation on the smaller line to save costs. Beast was available in two versions: Blue and Grey. At first it may seem like just a paint swap, but the figures are actually pretty different. If you couldn’t tell from the pictures, the one I’m looking at is the Grey Beast figure, which is the rarer of the two. The look is based upon Beast’s initial furry appearance, during his short solo series. By the time he appeared in Avengers, his fur color had been changed to blue, and he stuck with that. Over the years, Beast has become bulkier and more feral, but this sculpt takes him back to the basics. The sculpt is all-new to this figure (though many of the pieces are shared with his blue counterpart) and it’s quite well done. Beast is bigger than others in the line, but not gargantuan; he has the stocky strongman look that the character sported into the 80s or so. The proportions are all pretty much what they should be, something AI and its predecessor Marvel Universe have been known to struggle with in the past. The figure is coated almost from head to toe in a furry texture that is really well rendered and sells the characters beastly nature quite nicely. All of this is topped off by a head sculpt that is a near perfect translation of the “Classic Beast” style head. For all the expert work that was done on the sculpt, the paint is a bit sparse. The figure mostly relies on the molded grey, with some flat blue for the shorts, and a few black and dark grey details. Most of the paint is on the head; the eyes and mouth are pretty good, and the hair’s not bad. There’s a random spot of black on the chin, which I feel certain isn’t supposed to be there. The only other paint is on the forearms, where his hair is painted black. There isn’t really any transition work, so he just has the big black spots on his arms, with looks weird. Overall, the paint’s not atrocious, but it could definitely be better. Beast includes no accessories.

THE ME HALF OF THE EQUATION

I picked up Beast from Target. I was actually looking for some of the new Marvel Legends at the time, but I came across this guy and the rest of his series. I’ve been working on a MU Avengers display for a while, and being able to replace the existing Cat Beast with this guy was definitely nice. The figure really has some issues with paint, however the underlying sculpt is strong enough that it ends up saving the figure. And now I’m gonna sit here and wait for Hasbro to release this guy painted blue so that I can have a proper Classic Beast.

#0502: Vision & Quicksilver

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

VISION – MARVEL NOW & QUICKSILVER

MARVEL MINIMATES

Vision&Quicksilver1

Obviously, yesterday’s Marvel Minimates review wouldn’t be complete unless it were to be followed by another Marvel Minimates review, right? That’s just plain old sound logic right there. Obviously. So, how’s about we take a look at two pretty important Avengers who are undoubtedly certain to be thrown into super-stardom by this summer’s Avengers: Age of Ultron, Vision and Quicksilver!

THE FIGURES THEMSELVES

This pair of figures makes up another of the four two-packs released as the 19th series of Toys R Us exclusive Marvel Minimates. Unlike yesterday’s set, which augmented a boxed set, these two are just kind of stand-alones for this series. In fact, they don’t even represent the characters from the same period of time in the comics, so they aren’t even related to each other.

VISION – MARVEL NOW

Vision&Quicksilver2Vision is the next in a decently-sized of characters getting the requisite figures of their looks from the Marvel Now! re-branding. This marks the third figure named Vision in the line, but it’s really only the second figure of the “original” Vision (Vision 2.0 being a related, but separate character). While the last Vision represented the character’s classic look, this one is, as the name indicates, based on the look he received as a result of Marvel Now! For my money, it doesn’t quite live up to the classic design, but it’s not a bad look purely on its own. Vision is about 2 ½ inches tall and has 14 points of articulation. He’s built on the standard Minimate body, with an add-on for his cape. The cape is a re-use from DC Minimates Series 1 Superman. It’s a pretty straightforward normal cape piece, so it’s a fair choice. Other than that, the figure is just a vanilla ‘mate, which is pretty much to be expected for Vision. Vision’s paint is pretty spot on. The base colors are clean, and all the line work is nice and sharp. The colors could possibly stand to be a bit bolder, especially the greens, but they aren’t bad. Also, I would much prefer yellow to the gold on the figure, but that’s more of a personal preference. Vision includes a spare set of arms and legs which are translucent (to simulate his phasing abilities) and a clear display stand. The lack of a flight stand is a little annoying, but the extra limbs are pretty cool.

QUICKSILVER

Vision&Quicksilver3This marks Quicksilver’s second Minimate. He’s actually the same basic design as the last one, so this one’s more of an update than anything else. Both are based upon the character’s second, blue and white costume, which is the one he’s worn for the majority of his career, so it’s a pretty classic design. The figure is about 2 ½ inches in height and he has 14 points of articulation. He uses the standard Minimate body, with an add-on piece for the hair. The hair is re-used from one of the Wolverine Origins Wolverines. It’s something of a questionable choice. It’s not terrible, but it’s not a particularly close match. It would be nice if he’d gotten his own piece, but I guess this one works in a pinch. Quicksilver’s paint work is overall, pretty decent. The colors are nice and bold, and the detail lines are sharply applied. I do like that he has the proper black shorts that he tended to have in most depictions of the costume. Those were absent from the last Quicksilver, so it’s nice to see them here. Perhaps the only real issue with the figure’s paint is his face. Admittedly, the face is much better in person than it looks in pictures, but something about the mouth just seems really off. Maybe if he lost the dimples, it would look better. Quicksilver includes a dust cloud piece for running and a clear display stand.

THE ME HALF OF THE EQUATION

Like the last set, I got these from my local TRU (shout out to Minimate Multiverse member Ms. Marvel Fan, who helped make sure I got the set). This set isn’t perfect, but I really like it. Vision is one of my favorite Avengers, so getting a new version of him is pretty awesome. And Quicksilver offers a nice update to the original, which is a welcome addition.

Vision&Quicksilver4

#0501: Iron Man – Space Armor & Ronan the Accuser

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

IRON MAN – SPACE ARMOR & RONAN THE ACCUSER

MARVEL MINIMATES

IM&Ronan1

You know what I’ve missed reviewing? Marvel Minimates. Sure, I’ve reviewed a fair amount of figures from other Minimate lines, and a fair number of other Marvel figures as well, but it’s just not the same! As luck would have it, the latest set of TRU exclusive Marvel Minimates just started hitting stores, so new Marvel Minimates to review! First up, it’s two space-faring ‘mates, Space Armor Iron Man & Ronan the Accuser!

THE FIGURES THEMSELVES

These two comprise one of the four two-packs that make up the 19th Toys R Us exclusive series of Marvel Minimates. These two figures in particular were originally designed for the TRU exclusive Infinity tie-in set, but they weren’t amongst the four chosen for the actual set. It’s nice to see them turn up here.

IRON MAN – SPACE SUIT

IM&Ronan2Like Captain America before him, Iron Man has had quite a few Minimates in the past, but he had yet to join the ranks of the space worthy heroes. Now he’s an official member of the club, with a card and everything. Okay, there’s no card. Or club. It’s more of an “in my mind” sort of thing. Anyway, Iron Man was the other “heavy hitter” from the Infinity poll, so it’s no surprise to see that DST found a spot for him. The figure is roughly 2 ½ inches in height and he has 12 points of articulation. Tony’s had a few space armors over the years, but this ‘mate is based on the most recent one, which has made prominent appearances in the recent Guardians of the Galaxy comics, as well as being Tony’s main look in Infinity. Iron Man is built on the standard Minimate body, with non-standard pieces for the upper arms, hands, and feet, as well as add-ons for the helmet and torso armor. The figure features a fair bit of re-use from previous Iron Men. The upper arms come from the Series 35 Mark V, the hands are from Series 49’s Mark 42, and the feet are from Series 45’s Mark VII. The helmet and chest piece are both new to this figure, and both seem to be pretty great adaptations of the comic design. The re-use pieces are also pretty decent matches to the source material, which is always cool. It’s really awesome to see DST put their tremendous bank of prior IM pieces to good use. Iron Man’s paint is overall pretty good. The base colors are a little sloppy in some places, and it would be nice if the red and gold were just a little bit more distinguished. The biggest issue is one that isn’t apparent when the figure is all armored up. The underlying Stark face is set rather high on the head, resulting in a rather chubby looking Tony, and worst off all, the red paint from the helmet has bled onto the face, resulting in permanent red marks. Fortunately, these issues are hidden by the helmet, and the rest of the figure’s paint, particularly the detail work, looks nice and sharp. Iron Man includes a spare hair piece (re-used from the Series 51 Nova), a blast off base cast in yellow, and a clear display stand.

RONAN THE ACCUSER

IM&Ronan3Now we get to the real star of the set, Ronan the Accuser! This marks Ronan’s second venture into the world of Minimates, but it’s the first comic version of the character. As cool as the movie version was, it’s hard to beat the classic Ronan design. Ronan stands about 2 ½ inches tall, and has 14 points of articulation, although his head is a bit restricted by the hood. Ronan is based on his original comics design, which is the one he’s pretty much stuck with since his creation. It’s a solid piece of design work, and really holds that classic Marvel feel. The figure is built on the standard Minimate body, with add-ons for the hood/shoulder pads, belt/skirt, and glove and boot cuffs. The glove and boot cuffs are re-used from numerous classic Iron Man ‘mates. They’re pretty straightforward pieces, and they are pretty much perfect for Ronan’s look. The hood/shoulder pads and the belt/skirt are both new to this figure. Both pieces are very nicely sculpted and are pretty much spot-on for the character. The impediment of the neck movement by the hood is a little annoying, but I’m not sure how else it could be handled. Ronan features some pretty great paint work. The various greens are all very nicely chosen and all pop in their own way. The detail lines are fantastically handled, and the face in particular is perfect for Ronan. Ronan includes his signature hammer (and the head is right side up this time) and a clear display stand.

THE ME HALF OF THE EQUATION

I acquired these two from my local TRU, with the assistance of fellow Minimate Multiverse member Ms. Marvel Fan, who was super helpful in making sure I got a set. I’ve been anxiously awaiting this set’s release ever since I picked up the Infinity set, so I’m really happy to finally have them. Iron Man is a little “meh” but he’s not terrible. Ronan, on the other hand, is easily one of my favorite ‘mates in quite some time. He’s just so well done!

IM&Ronan4

#0497: Green Goblin

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

GREEN GOBLIN

MARVEL LEGENDS

Ah, yes, ToyBiz’s Marvel Legends. What a bunch of mixed feelings that was. When they were new, I loved the figures, but they were impossible to get. Now, they’re a lot easier to get a hold of, and… well, it seems there was quite a nostalgia filter.

One of the things about when ToyBiz was handling the line is that they consistently had a Spider-Man line running alongside it. This generally meant that any Spider-characters would appear in that line, not in Marvel Legends. However, there were three instances of the unofficial rule being broken. One such case was today’s figure, the Green Goblin!

THE FIGURE ITSELF

Green Goblin was released in the 13th Series of ToyBiz’s Marvel Legends. The series was officially titled the “Onslaught Series” after its Build-A-Figure, and unofficially titled “Bring On the Bad Guys” due to the fact that it was a series of nothing but villains. It was actually a pretty novel idea, but seems like the sort of thing that would never happen now. Goblin is roughly 6 inches tall and he has 36 points of articulation. All that articulation, and he still couldn’t stand on his glider the right way. It’s mostly the fault of the hip joints, which were common to this era of ML figures and were notorious for their inability to forward and back and side to side at the same time. You had to pick one or the other. This figure does actually represent one of the few times that the toe articulation proved useful, so that’s a plus, though the finger articulation was as pointless as ever. The figure’s sculpt may or may not have been new to him. This figure was released around the same time as a Hobgoblin from the Spider-Man line, and they shared all but the head, pelvis, and shins. I don’t know which one of them used the pieces first, or if they were in fact designed to share the pieces from the beginning. Regardless, the figure sports one of the best Green Goblin sculpts, pretty much ever. The build is actually pretty great for the Goblin, and the scales on his arms and legs look fantastic. The highlight of the figure is easily the head, which translated Goblin’s grinning visage perfectly to three dimensions. This is easily one of ToyBiz’s best sculpted efforts from this time-period. While the figure is fantastically sculpted, the paint leaves a little bit to be desired. The biggest thing is that it’s just way too dark. Goblin’s a character who really needs to be bright and garish, so the subdued green and not quite purple doesn’t really work. The washes are also a little heavy and uneven, and they just make the figure even darker. From a purely technical standpoint, the paint is clean; cleaner than a lot of other ToyBiz Legends, so kudos to them on that. The figure included his trusty satchel, a display stand in the form of his signature glider, and a piece of Onslaught. The glider ends up with the most issues. For one thing, it seems a little droopy on the sides. The biggest issue, though, is the completely opaque piece holding the glider up. They didn’t even try to make it a little inconspicuous, which just feels lazy.

THE ME HALF OF THE EQUATION

Goblin actually comes from the point in the line where the figures became a little easier to get a hold of. He was picked up from my local comicbook store, who had started getting the figures in for a slightly higher price. I can’t remember exactly what led me to get Goblin, as I’m not the character’s biggest fan or anything. I will say he’s one of the nicer figures the line had to offer, and, aside from the hip joint issue, he actually still looks pretty good with modern Legends.

#0490: Nebula

Posted by Ethan Wilson in Reviews and tagged with , , , ,

NEBULA

GUARDIANS OF THE GALAXY VINYL FIGURES

Alright, so after the detour into Marvel Legends land, I’m coming back around to Funko’s Guardians of the Galaxy stuff. This review was actually supposed to be posted last Monday, but it wasn’t. I’m not sure if it had to do with being rather sick last weekend or if I had just had too many “meh” reviews in a row, but when it came time to write this, I just couldn’t. The words wouldn’t come to me. So, I did the ML stuff, which has brightened my spirits a bit, and now I’m back to Nebula. Let’s take a look at how she turned out.

THE FIGURE ITSELF

Nebula’s part of the first assortment of Guardians of the Galaxy Vinyl Figures. Unlike Star-Lord, Nebula is the only version of the character available in the line (also one of only three Nebula figures available total, like in all of the GotG product). Nebula is a little under 3 inches tall and has no articulation, unless you want to count the bobble head. Nebula’s sculpt is wholly unique to her, and while it is well done from a technical stand-point, there are some questionable choices. Namely, what the heck is up with her pose? She’s standing kind of straight, with her legs wide, and she’s leaning forward just a bit, with her head tilted back ever so slightly. And then there’re the arms, which are outstretched, but almost in a halfhearted sort of way, like she’s been holding them up for a minute and now they’re starting to get tired. What was Funko going for here? Is this meant to replicate a specific pose from the movie? Because I don’t recall Nebula replicating this pose at any point, and if she did it must have only been for the briefest of moments. There seems to be some inconsistency on how the mechanics on her head should be done as well. The bit at the top of her scalp is sculpted, which the stuff around her eye is just painted, so they don’t match. Those things aside, she does have some nice detail work on her costume and such, which is cool, I guess. While the paint on Star-Lord was beyond the Funko norm, Nebula is about par. There’s some nice work on the face, but the paint on the body is fuzzy around the edges and there’s a fair bit of bleed over. Also, the colors are all very similar, which makes the figure a little dull looking. I know she had a limited palette in the movie, but other merchandise has made it work.

THE ME HALF OF THE EQUATION

Nebula is from the same mall trip (with Super Awesome Girlfriend!) that got me Star-Lord and my SciFi Vinyl Figures. Nebula was the other half of the two GotG blind-boxed figures I picked up. I was initially rather excited to get her, what with Nebula being a favorite of mine from the movie, but I think some of the excitement has worn off. She’s really not as good as she could have been, and it’s sad that this was Nebula’s only figure at the time of the movie’s release. With all that in mind, the figure’s not the worst thing ever. I honestly can’t say why I put this review off for so long. It was actually rather painless.