Tag Archives: Marvel

#0483: Machine Man

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

MACHINE MAN – AVENGING ALLIES

MARVEL LEGENDS INFINITE SERIES

Super hero comics are a pretty big, wide ranging medium, so it only follows that they would have an equally wide selection of characters. Characters who can range from really well-known and widely popular to almost unknown. When it comes to action figures, it can be pretty hard to justify releasing a C or D-list character. While a comic can create or feature an obscure character by printing a few lines, a toy has to be sculpted, tooled and packaged, and then they actually have to find not only a customer base for an item, but a retailer interested in carrying it. So, when a character like Machine Man gets a figure, that’s a pretty big deal.

For those of you who don’t know the character, Machine Man, aka X-51, aka Aaron Stack, is a Marvel character from the 70s. He was created within Marvel’s 2001 comics, after which he made his way into the main universe. In a nutshell, he’s a robot who was raised to be as much like a human as possible. He also saw a jump in popularity a few years ago when he served as one of the principle characters in Warren Ellis’s Nextwave: Agents of Hate. So, with that out of the way, let’s move on to the figure!

THE FIGURE ITSELF

Machine Man was released as part of the first series of the Avengers Marvel Legends Infinite Series. He’s been released under the name “Avenging Allies,” a name he shares with Sentry. Unlike most prior shared-name figures, Machine Man and Sentry are both in the initial shipments of the series as opposed to one of them being swapped for the other in refresh cases. The figure is about 6 inches tall and he has 32 points of articulation. He’s very definitely based on Machine Man’s original design, which is nice to see, especially in an assortment of otherwise modern figures. The figure is built on the basic male body which originated with Bucky Cap, along with a new head and belt. The Bucky Cap body has been showing up with increasing frequency in Hasbro’s Legends releases, but that’s hardly a bad thing. Aside from the slightly odd veins at the top of the pectorals, it’s a very nicely sculpted body, and it works great for Machine Man. The head sculpt is somewhat simple, but it’s sharply detailed and absolutely perfect for the character. The belt is a good sculpt on its own, however, it’s fit on the figure is a bit iffy. Mine was stuck up a little too high, which caused it to get stuck in the ab joint, leaving the belt rather mangled. It’s not obvious unless viewed directly, but it’s the sort of thing that really shouldn’t happen, especially as prices continue to climb. The figure’s paint is pretty decent. He’s molded in a metallic purple (which is really great) and the silver, flesh tone, and red are all paint. The paint application isn’t bad, but it’s not perfect either. There are one or two spots of bleed over, mostly on the face. That said, it’s a lot cleaner than Hasbro’s recent offerings in the line, which is a good sign. Machine Man includes a set of extended arms with hands attached and a set of arms for the Build A Figure. There are two possible Build-A-Figures this time; one is Odin, and the other is Future Thor. They use the same torso and legs, with different heads and arms included with the “swap” figures. Machine Man includes Thor’s arms.

THE ME HALF OF THE EQUATION

Machine Man was picked up for me by my Dad, along with the rest of the series. This is the figure I was most eager to get from this series, as I’m a really big Machine Man fan. In fact, back when ToyBiz was still doing Marvel Legends I even made my own custom Machine Man. I’m thrilled beyond belief to have a proper figure in my collection, and I’m happy he turned out as well as he did. Now, is it too much to ask for a Nextwave version?

*Want a Machine Man figure of your own?  He’s currently in-stock with our sponsors over at All Time Toys!  Click here to check him out!

#0482: Star-Lord

Posted by Ethan Wilson in Reviews and tagged with , , ,

STAR-LORD

GUARDIANS OF THE GALAXY VINYL FIGURES

Guardians of the Galaxy was a very good movie, which is a very good thing. Essentially, it’s given Marvel the confidence to make just about any damn thing they want to. It’s also provided various companies a lot of merchandising opportunities. Funko has jumped in on the fun, offering not just their usual Pop! figures, but also a line of blind boxed vinyl bobble-heads. Let’s have a look at one of the line’s offerings of Legendary Outlaw Star-Lord.

THE FIGURE ITSELF

Star-Lord is part of the first, and so far only, assortment of Guardians of the Galaxy Vinyl Figures. He’s one of the two versions of Star-Lord released in the line. This is the basic standing one, as opposed to the more wildly posed one. He’s about 3 inches tall and he has no articulation, though he does have a bobbly head. Like just about every other Star-Lord figure out there, he’s based on the character’s long-coated appearance in the film’s opening scenes. The sculpt is simplistic, but very bold and very sharp. It’s a pretty great translation of the movie design, and it looks very nice. It doesn’t have the more ornate texture work of other figures, but it’s very eye-catching and it really has a nice stylistic touch to it. Paint is an area with which Funko sometimes has some trouble, but that’s not the case here. Everything is nice and clean, and the colors are pretty good matches. I’m still a little thrown by the silver on the helmet, but that’s actually just the inaccurate Hasbro color scheme messing with me.

THE ME HALF OF THE EQUATION

Star-Lord hails from the same Hot Topic trip with Super Awesome Girlfriend that got me the various Sci Fi Vinyl Figures. Star-Lord was one of two of the blind boxes that were still left, which worked out pretty well I suppose. Star-Lord’s a solid figure to be sure, and just another great addition to all the GotG stuff.

#0478: Dancing Groot

Posted by Ethan Wilson in Reviews and tagged with , , , ,

DANCING GROOT

FUNKO POP!

Like just about everyone else on the planet, I loved last summer’s Guardians of the Galaxy immensely. I picked up quite a few of the figures and enjoyed all of those as well. Of all the characters in the movie, Groot was definitely my favorite. In particular, I loved the mid-credits scene, where a potted Groot dances to Jackson 5’s “I Want You Back.” But what good is a favorite scene to a toy collector if he can’t replicate it in plastic form? Obviously, the spoilers involved with Baby Groot meant that he wasn’t present in any of the first releases of toys. However, Funko was quick to offer a Dancing Groot, as part of their Funko Pop! Marvel line.

THE FIGURE ITSELF

Dancing Groot is figure #65 in the Pop! Marvel line, and he was released along with Howard the Duck as a pseudo second wave of GotG Pops. The figure is roughly 3 ½ inches in height. Due to contractual issues regarding Hasbro having the master Marvel toy license, Groot is not actually a figure, but a bobble head. This means the usual one point of articulation at the neck has been replaced by a spring for bobbling. You can still sort of turn the head a little if you’re so inclined, but it probably wouldn’t be good for the figure in the long run.  Like most Pop! figures, Groot features a sculpt that is unique to him. At first glance I thought the figure might have made use of pieces from the last Groot Pop!, but that’s not the case. As is the case with all Pop! figures, Groot has been made to fit the aesthetic of the rest of the line, though the changes are less drastic on him compared to others. The figure has the standard squared-off head, though the size of it isn’t quite as exaggerated this time around. Groot also features a mouth, a feature that is often removed from Pop! figures, but is essential to this figure properly capturing Baby Groot’s happy disposition. The details of the sculpt are a little on the soft side, but not out of the ordinary for the line; the figure clearly has a proper barky texture, which is what’s important. The pot is effective in being what it is, and it’s appropriately geometric. Groot’s paintwork is probably the best I’ve seen on a Pop! He’s not plagued by any bleed over or fuzzy lines, which are common to the line. What’s more, a considerable amount of effort has been placed into giving the figure a nice wooden look. There’s a very nice bit of dark brown accent work, which helps to bring out the sculpt’s texture. Dancing Groot includes no accessories, though this is no surprise for the line.

THE ME HALF OF THE EQUATION

Dancing Groot is yet another Amazon purchase. I’ve had him pre-ordered pretty much since he first went up for sale. While it’s not a straightforward Baby Groot, it’s a fun little figure, and easily one of the most sensible uses of a bobble head of a Marvel character. This guy was just made for sitting on a car dashboard.

#0452: Future Wolverine

Posted by Ethan Wilson in Reviews and tagged with , , , ,

FUTURE WOLVERINE

MARVEL MINIMATES

Alright, the Christmas reviews appear to be done (though, as last year showed, looks can be deceiving on that front), so now it’s time to get to the glut of pre-Christmas purchases still awaiting review! That ends up being a fair number of Minimates (and other mini-figures). Bear with me. Up first is another figure from the ever plentiful Marvel Minimates line. There were quite a few releases in that line this past summer, so I had to do some picking and choosing. Fortunately, end of the year sales are good for allowing some catch-up. Today, I’ll be taking a look at one of the Wolverines released to tie-in with last year’s X-Men: Days of Future Past.

THE FIGURE ITSELF

Wolverine was released in Marvel Minimates Series 58, which was based on the Days of Future Past movie. He was originally packed with Storm, but I don’t have her. What’s more, he was originally slated to be released with Rogue, but then she was cut out of the movie. Not that any of that matters for this review. Wolverine is one of two versions of the character released in Series 58. This one, as the name at the top of the review implies, is based on the version of the character from the future timeline. The costume is a variation the black uniforms sported by the X-Men in all but First Class, though this time around it’s more practical than the previous leather costumes, and it has a bit more color. The figure is roughly 2 ½ inches in height and he sports the standard 14 points of articulation. He’s built on the usual Minimate body, with a set of clawed hands in place of the normal ones and an add-on for the hair. Both the hands and the hair are re-use from the Wolverines in Series 52. Your Super Awesome Girlfriend loves you very much. They’re a good approximation of the look from the movies, and the fact that they’re the same as the ones from the movie-based Series 52 figures adds a nice bit of continuity. The rest of the figure comes down to paint. Fortunately, the figure has some very nice paintwork. This is a design that could have been phoned in, but DST really did well here. All of the armor is outlined by highlights, and all of the color accents are in the right places. Wolverine has his DOFP-trademarked white sideburns, which, while perhaps a bit too bold, are cleanly done. To top it all off, the face is one of the better Hugh Jackman likenesses we’ve seen on the many Minimate incarnations. Wolverine included a clear display stand and nothing else. It would have been nice to get a spare set of hands, but it’s not like black hands are a rarity.

THE ME HALF OF THE EQUATION

I passed on Future Wolverine when he was first offered for a few reasons, though none really related to him. First of all, he was packed with the movie version of Storm, who I don’t have a real desire to own, and second, my local comicbook store didn’t have the set, preventing me from any pesky impulse buys. Recently, I’ve gotten into the habit of buying one loose Minimate at random from Luke’s Toy Store, just for the novelty. So, when I ordered a few things during his Cyber Monday sale, this was the random Minimate that arrived. I actually really like this figure. It’s simple, but very effective.

#0445: Falcon

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

FALCON

MARVEL SELECT

Today, we make our way into the back half of the Christmas Reviews, with Day Eight. This review breaks from the Doctor Who and Aliens theme, instead turning to the Marvel Super Heroes branch of things, which is something of an “old faithful” for me.

One of my favorite movies last year was Captain America: The Winter Soldier. Like any good superhero movie, it had its fair share of toys, offering the movie’s characters in a variety of scales. My personal favorite of the bunch were Hasbro’s Marvel Legends offerings. However, there was one issue; as cool as Hasbro’s versions of Cap, Widow, and the Winter Soldier were, the line did not include a figure of Falcon, one of my favorite additions from the movie. I tried to make do with the smaller scale 3 ¾ inch figure, but he just wasn’t the same quality. Enter Marvel Select.

THE FIGURE ITSELF

Falcon was released as part of Diamond Select’s Marvel Select line. Falcon is one of the two figures they released based on CA:TWS (The other was Stealth Suit Cap). The figure is based on the character’s appearance during the final battle sequence of the film, once he’s all decked out in his full uniform. Falcon is a little over 7 inches in height (making him a full inch taller than the Legends Cap) and he features 22 points of articulation. While he’s not as well articulated as the Legends figures, he’s certainly above the standard Select figure. The figure features a brand-new sculpt, just for Falcon. Overall, it’s pretty well done. The proportions are nice, the uniform has some great texturing and layering, and the head sculpt has a decent likeness of Anthony Mackie. It’s not without its faults, though. The head could stand to be a little more textured, and I’m not really sure what’s up with the positioning of his hands. It seems like he’s meant to have something to hold (maybe his guns from the movie?) but nothing is provided, so his hands are just doing this “Kung Fu Grip” sort of thing. The figure’s paint is pretty good, though still just shy of perfect. The work on the uniform is fantastic. It’s nice and clean, and there’s some very nice, small detail work. The paintwork on the head has similar issues to the sculpt; it’s just too smooth and clean. This is especially evident on his facial hair, which almost looks drawn on. That said, the paint really isn’t bad. Falcon included a pair of wings and a display stand made to look like a piece of the Helicarrier. The wings are well sculpted, but I really wish there were a way to pose them or attach them a bit differently. As it is, they each have a square peg on the end that plugs into his back harness, meaning they can only be attached sticking straight out. Something similar to the Minimate (which allowed the wings to either be attached to the harness or held in his hands) would have been much preferred here. The stand is pretty cool, I guess, though I don’t really see myself using it much.

THE ME HALF OF THE EQUATION

Falcon was another gift from my super cool, super supportive parents. Of all the gifts I received this year, Falcon seems the most “slow burn” (in fact he was the very last of my gifts to actually be taken out of its package, almost a week after Christmas. I kinda felt bad about that,) but he’s a great figure of a great character. Sure, he’s a little too large to fit with my Legends figures, but at least he’s a cool figure in his own right. Scale I can fudge, bad figure less so.

#0429: Infinity Minimates

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

SPACE SUIT CAPTAIN AMERICA, ARMORED HULK, INFINITY THANOS, & THANE

MARVEL MINIMATES

Marvel Minimates is really just the line that keeps on giving. I have a pretty substantial back log of figures I already had before the site was started, so they were already going to show up a lot. However, they also provide new releases on a very regular basis. Which makes for even more frequent reviews. Yay.

Marvel Minimates is also one of the few Minimates lines to be fairly consistently supported by Toys R Us. TRU has carried 18 of their own exclusive series of the line. In addition, they’ve offered fans the opportunity to influence the line a bit with Fan’s Choice boxed sets based on certain events. Today, I’ll be looking at the most recent of those sets, based on last year’s Infinity cross-over. Full disclosure: I haven’t read any of Infinity, so I can’t really speak to any story specific stuff. I know the general gist of it, and I know who the one storyline specific figure in this set is.

THE FIGURES THEMSELVES

These four were released as part of a Toys R Us exclusive four-pack. The line-up was chosen via a poll on Toys R Us’s website. There were two other figures, Ronan the Accuser and Space Suit Iron Man, who did not make the cut for this set, but will be appearing in the TRU Series 19.

SPACE SUIT CAPTAIN AMERICA

There have been a fair number of Captain America ‘mates, especially recently, but this is the first time he’s been space worthy. It’s also the third ‘mate based on Cap’s Marvel Now! appearance. Cap’s clearly the “safe” figure in this set, but that’s not necessarily a bad thing. The figure is about 2 ½ inches tall and he sports 14 points of articulation. He’s based on Cap’s space-faring look from Infinity, which I understand is the look he had for most of the story. It’s basically just a tweak on his regular Now! design and it looks pretty good. The figure makes use of the standard Minimate body, with non-standard upper arms and hands, as well as add-ons for his helmet and space-y web gear. The hands and helmet hail from the previous two Now! Caps, which is a sensible re-use. They’re well-sculpted pieces that are accurate to the source material, so it’s a win-win. The upper arms originally appeared on the Series 49 Mark 42. They aren’t quite as warranted as the hands and helmet, but they’re reasonable enough as a generic set of tech-y arms. The web gear is the only really new piece present. It’s well enough sculpted, and it seems to be pretty accurate to the source material. It’s not the most exciting piece, but it does its job. Cap’s paint work is pretty decent. For the most part, everything is clean, and the details are sharp. However, the paint on the helmet/head is applied in such a way that is impossible for me to get the helmet off his head, which is rather annoying. Cap includes his mighty shield and a hand wield said shield (both reused from the previous Now! figures), as well as a hair piece (also from the Now! Cap), and a clear display stand. The shield is a bit sloppy paint-wise, and the hair is ultimately not very useful due to the issues with the helmet.

ARMORED HULK

Hulk here is a bit less space-ready than the Cap figure. As the name implies, he’s just an armored version of the character. The figure is over 2 ½ inches tall, closer to the 3 inch mark, and he features 12 points of articulation. He’s based on the character’s Now! look. This is the second Minimate based on the look, but the first one was more armor-lite. This is what the character’s looked like for most of the Now! run. The figure is built on the basic Minimate body, with non-standard pieces for the hands and feet, as well as add-ons for the hair, torso, upper arms, waist, torso extender, and upper legs. The hair and upper arms first cropped up on the Series 41 Mega Rage Hulk, the feet first appeared on TRU’s Hulk as Nul, the hands are from the Hulk TTA Maestro, and the torso extender, waist cover, and upper legs are from the TRU 16 Now! Hulk. The chest piece is the only truly new part, however it’s nicely handled. The reused pieces are used a such a way that it wasn’t immediately obvious that the torso was the only new part, which is a sign of good re-use. The shift from sculpted detail lines on the armor on the torso and upper legs to painted on the feet is a little bit jarring at first, but it’s not too bad. Hulk’s paint alright, but it could be better. There’s some bleed over on the transitions from armor to skin, and there’s some pretty bad slop on the back of the figure’s head and torso. The figure also suffers from the same stuck pieces that plagued Cap, something that is a common theme in this set. Hulk includes a clear display stand.

INFINITY THANOS

Thanos here is probably the biggest draw of this set. This is the third version of Thanos in the Marvel Minimates line, but it’s been five years since his last figure. If you’re a faithful follower of my reviews, you’ll recall I didn’t think the last one was very good. Plus, he’s set to be a major player in the Marvel Cinematic Universe in the next few years, so it’s really good timing. Thanos is the largest ‘mate in the set, coming in at just shy of 3 inches tall, and he has 12 points of articulation. He’s based on Thanos’s recent redesign from Infinity. It’s not far off from his original design, but there are a few differences in the execution of some of the details. Thanos uses the basic Minimate body as a starting point, with non-standard hands and feet, as well as add-ons for his helmet, torso, upper arms, waist, torso extender, and upper legs. The upper arms and legs are from the Series 41 Hulk, the extender is from the TRU 16 Hulk, and the waist cover is from a whole bunch of Minimates (I’m not sure who used it first). The helmet, torso cover, hands, and feet are new to Thanos, and they’re pretty good overall. The torso is probably the best piece. It has a lot of ornate detail work that looks really good. The hands and feet are decent, though they seem a little too rounded. The helmet is good in theory, but not quite in practice. It’s well sculpted, but it sits too low on the head, which obscures a lot of the details on the face. Thanos’s paintwork is pretty clean overall. There are a few spots with some bleed over, but most of it’s pretty sharp. The face in particular looks really good, and it definitely improves on the last one. Unfortunately, Thanos was not exempt from the stuck paint issues. His helmet was practically glued on when I got him and took quite a bit of effort to remove. Thanos includes a clear display stand. It would have been nice to get an Infinity Gauntlet that matched this figure, but since it wasn’t in the story, I can understand its absence here.

THANE

Hooo boy, Thane. This guy. So, Thane is the one new character in the set. He’s also new to the storyline, and he has a sort of important role, so I guess his inclusion makes sense. In case you were unaware, Thane is Thanos’s son and he’s half Inhuman, which sort of makes him a bit of a mess. The figure is about 2 ½ inches tall and has 14 points of articulation. Thane is based on the character’s appearance post-Terrigen Mist exposure, which is notably Thanos-inspired. It’s an okay design, though not particularly thrilling. The figure is mostly a “vanilla ‘mate” with his only unique piece being his left hand. This piece is re-used from the DC Minimates Series 6 Cheetah figure. It’s a pretty standard clawed-hand, so that’s good. The rest of Thane’s detail is done with paint. For better or worse, Thane exhibits the best paintwork of the lot. The base colors are clean and even, the colors are pretty bold, and the detail lines are nice and sharp. Thane didn’t have any issues with stuck pieced due to paint, although that’s likely due to his lack of add-ons. The figure includes a clear display stand.

THE ME HALF OF THE EQUATION

I found this set while killing some time during one of my brother’s rehearsals. Obviously, I got it from Toys R Us, it being an exclusive and all. I did participate in the vote on this one, and three of the four I voted for are in the final set, so I guess that’s cool. Unfortunately, Ronan, the one I wanted the most, lost out to Thane, which is a bummer. Guess I’ll have to wait for TRU 19. All in all it’s a pretty good set. Cap and Hulk are fun variants and Thanos offers some nice improvements to the last one. Thane is good on a technical level, but sadly neither the character nor his design is particularly exciting.  But hey, three out of four ain’t bad!

#0427: DOFP Wolverine & Colossus

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

DAYS OF FUTURE PAST WOLVERINE & COLOSSUS

MARVEL MINIMATES

Marvel Minimates has pretty consistently been the flagship of the Minimates brand, but it hasn’t been without its dark periods. Every fan has their own personal preferences, which means that where exactly the low points of the line lie can vary from person to person, but pretty much everyone agrees that Series 12 and 13 are probably the worst the line ever got. It’s no coincidence that immediately after those two series, the line started taking quick strides in innovation. The line looked like it was on its last legs (Series 15, set to be released not long after, is the only specialty assortment in the history of the line to be cancelled), and something had to change. Fortunately, the line did change, and it has continued for almost another 50 series, but man, somewhere there’s an alternate universe where these were the last Minimates we ever saw.

THE FIGURES THEMSELVES

These two were released as part of Series 13 of Marvel Minimates. The series was based around the then current Astonishing X-Men. This is the variant set, which swapped out a “Days of Future Past” styled Wolverine in place of the regular Astonishing one.

DAYS OF FUTURE PAST WOLVERINE

Or, as he’s known on the box “DOFP Wolverine.” I mean, I know what that stands for, but you’ve got to imagine that somebody stood there looking at the box wondering what the heck a “Dofp” was. I just recently looked at the new and improved take on this design from earlier this year, which I quite liked. This one is….different. The figure is about 2 ½ inches tall and he features 14 points of articulation. He made use of the standard Minimate body, with the then standard Wolverine claws in place of the normal hands, as well as an add-on piece for the hair. The piece, like every piece in this series, is a re-use, in this case from the Series 6 New Wolverine. What’s interesting is that the box actually shows the figure with the hair from the Series 3 Logan figure, which is a superior piece. Not sure why they made the change. Paint-wise, this is a pretty drab figure. I know the design isn’t the most vibrant to begin with, but there’s just no pop with this figure. The choice to make the jacket painted on robs the figure of a lot of dimension, and the jacket’s detailing is sub-par at best. I’m not exactly sure what the deal is with the face, either. He looks like he’s been… smooshed or something. And that’s not even starting on the whole double chin thing he’s got going. DOFP Wolverine had no accessories.

COLOSSUS

Colossus’s return to life was an important part of the early Astonishing X-Men, so his place in this series isn’t too surprising. Plus, his history with Wolverine and his decent sized role in the original “Days of Future Past” make this pairing a pretty great one too. Colossus is roughly 2 ½ inches tall and he has 14 points of articulation. He’s based on Colossus’s look in Astonishing, which is just a slight tweak on his classic design, so it’s a reasonable look. The figure uses the basic body, with an add-on for the hair. The hair is a re-use from the Giant-Size X-Men boxed Set Colossus. It’s a pretty cut and dry case of “if it ain’t broke, don’t fix it,” so it works nicely for the character. The lack of any other add-ons means that he’s a rather scrawny looking version of the character, which other versions have avoided. Colossus’s paint is at least a bit better than Wolverine. His colors are pretty good, though the red might be a touch too bright for this look. The detail lines are pretty nice, though not as sharp as they could be in a few areas. The choice to put the belt on the torso makes the waist seem too long, but at least it’s nicely rendered. Colossus included no accessories.

THE ME HALF OF THE EQUATION

I picked up this set from a friend’s local comicbook store during a black Friday sale. I’m pretty sure I got it for slightly less than retail, which is probably a good thing. It was actually the first variant set I was able to track down, which is unfortunate to say the least. All in all, it’s not the worst set ever, but it’s one that’s seriously lacking. It’s fortunate that the line was able to move past this series and become better and more successful.

#0425: Unmasked Spider-Man

Posted by Ethan Wilson in Reviews and tagged with , , , ,

UNMASKED SPIDER-MAN

MARVEL MINIMATES

Hey, look, more Minimates! So, yeah, the next few days are going to be Minimates reviews. Not anything new, but the randomized list sometimes spits out a few of them in a row. Hope you guys don’t mind me rambling on some more about them….

So, for this review, I’m going was back into the early days of Marvel Minimates, back when the concept of what constituted a unique figure was rather different than what it is today. So, without further ado, I present Unmasked Spider-Man.

THE FIGURE ITSELF

Unmasked Spider-Man was released in a two-pack with Doctor Octopus in Series 4 of Marvel Minimates. Ock is MIA, so it’ll just have to be Spidey this time. This figure’s shtick is exactly what it says on the tin: he’s a Spider-Man without the mask. Of course, nowadays the unmasked head is just an extra piece included with just about every Spider-Man, but back then figures had a lot fewer extras. The figure is about 2 ½ inches tall, and he features 14 points of articulation. He uses the standard body of the first 7 series, which it should be noted featured feet that were longer and had no peg holes for stands. It was a darker time. Anyway, the figure also features an add-on piece for the hair, which was sculpted specifically for this figure and never turned up anywhere else. It’s an okay piece, but it seems like it shrunk a bit compared to the prototype. It has a little trouble staying on, and it looks like he’s got a receding hairline. The figure’s paint is actually pretty great. From the neck down, he’s the same as the Series 2 Spider-Man, which set the standard for what the line could do. While the figure’s lack of any musculature dates him a bit, the weblines are nice and clean, and the go all the way around, which the current Spider-Men don’t tend to have. The face isn’t terrible, though he certainly looks angry about something. Unmasked Spider-Man included a backpack made out of webs, which is actually a pretty neat accessory.

THE ME HALF OF THE EQUATION

Unmasked Spider-Man was one of my earlier Minimate purchases. I remember I hadn’t actually gotten a regular Spider-Man yet, so this one served as my basic Spider-Man for a while. In retrospect, it’s not the most exciting Minimate, but at the time I was particularly fond of this one. Truth be told, all of the early Spider-Men were pretty outstanding examples of what the line had the potential to be.

#0416: Wasabi No-Ginger

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

WASABI NO-GINGER

BIG HERO 6

Aside from knowing that it was an adaptation of a Marvel comic, I didn’t really have much to go on when I went to see Big Hero 6. But, the previews looked good, so I gave it a shot. I’m very glad I did. It’s a very well done movie, and it tells a very compelling story. I really liked the movie, and me being me, that meant I had to have at least one of the action figures, right? So, let’s have a look at the one I picked up, Wasabi No-Ginger.

THE FIGURE ITSELF

Wasabi is part of the first series of Bandai’s Big Hero 6 toyline. The figure is about 3 ½ inches tall and he features 13 points of articulation. He’s based on Wasabi’s armored up look from the second half of the film. It’s his most distinctive look, and definitely the most toyetic. Wasabi features a brand new sculpt based on his character design from the movie. Overall, it’s a pretty good sculpt. Not perfect, but serviceable. Some of the proportions are a little bit off. His legs are a tad too stubby, and he’s generally just a little too wide. That being said, the exaggerated nature of the original design means that the problems aren’t quite as apparent as they might be. The best work is definitely the figure’s head, which is a pretty much spot on recreation of the character’s look in the movie. At first glance, I thought they had left off the goggles, but a quick look at a few screen captures from the movie shows that the goggles aren’t always present. The paint, much like the sculpt, is good, if not anything spectacular. All of the application is nice and clean, with no issues with slop or bleed over. The colors are simplified versions of the ones in the movie. Everything is a little brighter and flatter. The end result isn’t quite as exciting as the on-screen look, but it’s a passable interpretation of it. Wasabi includes two clip-on energy blades, and a sleeveless jacket thingy. The blades are moderately disappointing, mostly due to their solid coloring. Translucent plastic would do a lot to improve them. The jacket is nice, though superfluous. Evidently, it was based on a work-in-progress version of the character where he wore the coat as part of his final outfit.

THE ME HALF OF THE EQUATION

Wasabi is another figure to join the ranks of “Stuff my Super Awesome Girlfriend bought me.” Wasabi had a few traits that reminded her of me, so when we saw this figure at K-Mart the day after seeing the movie, she insisted on getting it for me. She’s really waaaaaay too supportive of this hobby. Isn’t it awesome?

What surprised me the most about this figure was that it was made by Bandai America. Generally, I find their figures to be extremely off-model and low quality, and that’s not even getting into the scale issues. I was pleasantly surprised by how much I liked this figure. Sure, he’s not going to be winning any “Best Figure of the Year” awards, but he’s a solidly built, fun little figure. If the rest of the line is anything like him, I’d say the license is in good hands.

#0414: Ms. Marvel, Captain America, & Radioactive Man

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , , ,

MS. MARVEL, CAPTAIN AMERICA, & RADIOACTIVE MAN

MARVEL LEGENDS INFINITE SERIES

Okay, last day of Marvel Legends reviews this round. But, we’re going out with a bang. Not one, not two, but THREE (count ‘em THREE!) figures this time. Target is doing something of a push for more business in their action figure department, so they’ve just started carrying exclusive sets from Hasbro’s Marvel Legends Infinite Series and Star Wars: the Black Series lines, as well as Playmates’ Teenage Mutant Ninja Turtles line. I just got the Marvel set, so let’s see how that turned out.

THE FIGURES THEMSELVES

Ms. Marvel, Captain America, and Radioactive Man are part of the exclusive Marvel Legends Infinite Series three-pack currently for sale at Target. Radioactive Man was previously slated for a regular release in the Marvel Legends line before the move to the Infinite Series branding, but he ended up getting cancelled. It’s nice to see him find a place here.

MS. MARVEL

“When her human DNA fused with that of the mighty Kree warrior Mar-Vell, Carol Danvers became the superhuman Ms. Marvel.” This is the star attraction of the set for a lot of people. It’s understandable, given that the character hasn’t seen a figure in this scale since way back in the Toybiz days. That’s a pretty dated figure, and near impossible to find, at that, so a new figure is a great move. The figure is about 6 inches tall and she features 29 points of articulation. She’s depicted here in her second costume, designed by the late Dave Cockrum. It’s generally the design she’s most associated with, and it’s probably one of the better ones. Ms. Marvel’s sculpt is head-to-toe identical to that of the Moonstone figure from the Thunderbolts boxed set. Generally, a complete re-use for a separate character doesn’t work out for the best, but Ms. Marvel and Moonstone have generally been rather similar in looks, so a little bit of paint is enough to make it work. It’s a pretty solid sculpt, with good proportions and movement. In addition to the Moonstone pieces, Ms. Marvel’s also been given a sash add-on, which actually does a nice job hiding the flatness of the lower torso. That was the only real issue with the original sculpt, so it makes the figure even better. The paintwork is, obviously, key on this figure, and for once Hasbro really made it work. Everything is really clean, and all the details are nice and sharp. The gold on the logo in particular looks really nice. About the only issue with the paint is the decision to have the exposed skin go up quite so high on the hips. If the costume came down a bit further, the articulation would be pretty well hidden, but as it is they look a bit unsightly. Ms. Marvel included no accessories, but apart from maybe an energy blast or something, there’s not much that would make sense.

CAPTAIN AMERICA

“Science made Steve Rogers a super-soldier with extraordinary speed, agility, strength, and durability, but it’s his heart that makes him Captain America.” Cap here is kind of the requisite heavy hitter of the set. It’s highly unlikely he’ll have much pull for the set’s intended audience, but he’s kind of unavoidable. The figure is about 6 inches tall and he has 32 points of articulation. He’s something of an amalgam of Cap’s various looks over the years. The strongest influence seems to be from the Ultimate universe version of the character, but the color palate is more classically inspired, and the painted on head wings are from the most recent incarnations of the costume. The end result is actually not bad. Like the design, the figure’s pieces are also something of an amalgam of previous figures. Most of the figure is re-used from the most recent Ultimate Cap (Which it should be noted took a lot of its parts from the ML Face-Off version of Punisher). The only pieces not from that figure are the right thigh, which is from the X-Men Marvel Legends Infinite Series Magneto, and the shoulder strap, which is from the ML Commander Rogers figure. The body is a little dated in comparison to some of the more recent stuff, but it’s not terrible. The add-on shoulder strap and belt pieces do a lot to mask some of the flaws, allowing it to serve as a decent mid-way point between the body like we saw on Carnage and the one used for Radioactive Man. I’m still not 100% sold on the head, but it could be worse. It’s just a bit too mean looking. The figure’s paint is pretty solid. Everything is pretty clean. I dig the boldness of the blue. The stars on the shoulders present a bit of an issue with posing, as moving the shoulders causes them to be a bit misaligned. Cap includes his mighty shield and an extra unmasked head. The shield is the same one we’ve seen a few times. It’s a good piece, plus it can be placed on his back, which is cool. The head is a re-use from Commander Rogers. It has a lot of the same issues as the regular head, but at least it matches.

RADIOACTIVE MAN

“A nuclear physicist with his eye on taking over the world, Dr. Chen Lu transformed himself into the walking atomic meltdown known as Radioactive Man.” Not to be confused with the Simpsons character of the same name. Radioactive Man is probably one of the primary reasons for this set’s existence, since I imagine Hasbro didn’t want the sculpt going to waste. The figure is about 6 ½ inches tall and he features 32 points of articulation. He’s based on Radioactive Man’s classic appearance, which is one of my favorites, as goofy as it is. Radioactive Man’s a big guy, and as such he’s built on Hasbro’s new bulky body, which I believe was first used for Hyperion. It’s a pretty good body, especially for larger characters, although the neck might be just a tad too far back. Still, it’s well-proportioned and poses well. Not much else you can ask for. Radioactive Man’s also got a brand new head and an add-on piece for his, uh, skirt. The head is pretty decent, though Hasbro’s male heads are starting to look a bit repetitive. Too many similar features, I guess. The skirt piece is nice, though it can end up being a bit restricting in some poses. Radioactive Man’s paint is pretty decent, if a bit sparse. For the most part he’s molded in translucent green, which is definitely cool. The skirt and boots are molded in s darker, solid green, and the torso’s painted to match. The logo on the chest is clean, which is good. I would have liked it to be more of a yellow, but it looks fine. The only other details are his eyes, which are just simple white. Unfortunately, the left eye on mine is out of place, but it’s not too noticeable. Radioactive Man includes no accessories.

THE ME HALF OF THE EQUATION

Unsurprising for a set that is exclusive to the store, I picked these three up from Target. My brother and I had gone to pick up Lego Batman 3 (which is awesome by the way), and I happened to find this set as well. As luck would have it, I had exactly the right amount of cash on hand to get both. Sure, I don’t really need another Captain America, but this one’s inoffensive and the other two more than make the purchase worth it. Plus, Radioactive Man. How can you say no to Radioactive Man? You just can’t!