Tag Archives: Marvel

#0253: Captain America – Rescue Version

Posted by Ethan Wilson in Reviews and tagged with , , ,

CAPTAIN AMERICA – RESCUE VERSION

S-WORLD MINIFIGURES

CapRescue

Today continues my first real look into the seedy underbelly of toys: Bootlegs! Yesterday, I took a look at Black Lantern Hal Jordan, who provided me a chance to acquire one of my favorite characters, albeit in a slightly less default look, in the Lego style. Today, I’ll be jumping over to the Marvel side, with a one of my favorite non-default looks of a character.

THE FIGURE ITSELF

Captain America is just as much a bootleg as yesterday’s Black Lantern, which means he’s not officially tied to any series, outside of the vague “S-World Minfigures” printed on his display stand. Unlike Hal, I haven’t even been able to tie this one to a larger set. He’s just here. Cap stands about 2 inches tall and has 7 points of articulation. He’s built on the bootlego body, which is a near perfect replica of the real Lego body. The figure is based on Cap’s “Rescue” look from Captain America: The First Avenger, which is a look I quite like. He features one add-on, a helmet, which seems to be a bootleg of the piece used on Lego’s green army men from Toy Story. The figure’s paint is once again impressive for such a back alley figure. The eyes are perhaps a bit soulless, and the helmet has been incorrectly adorned with a star instead of the proper A, but otherwise, everything looks pretty great. The figure is accessorized with a shield (based on his pre-circular one), a machine gun and a display stand.

THE ME HALF OF THE EQUATION

As with Black Lantern, I picked Cap up from a dealer at Mego Meet, before fully knowing the details of his creation. Cap is actually still more of a mystery to me than the other two I picked up, as I have yet to find any evidence of other people having this one. Nevertheless, I’m a big fan of this particular design for the character, and I was thrilled to be able to acquire in yet another style, even if he is less than official.

#0250: Iron Man Mark VII

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

IRON MAN MARK VII

THE AVENGERS (HOT TOYS)

markvii3b

Alright, I’ve gotten to 250 reviews. Amazingly, people are still reading these things. I guess I don’t drone on too much, right? Well, it’s been another 50 reviews, which means it’s time for another “Deluxe Review.”

Once again, the figure is one of those produced by Hot Toys, producers of extremely high-end action figures. They like to pick up the licenses to super hero movies, so it was no surprise to see them pick up the license to The Avengers in 2012. Today I’ll be looking at a version of a character that has been HT’s bread and butter the last few years: Iron Man Mark VII!

THE FIGURE ITSELF

The Mark VII is a part of HT’s Movie Masterpiece Series, number 185 to be specific. He stands a little over 12 inches tall and features 68 points of articulation in his default set up. The figure is based on the Mark VII armor, which is the armor that Tony wears during the final battle in Avengers.

The Mark VII is different from most HT figures in that he is a fully sculpted figure, instead of relying on different materials for a costume. The Mark VII features an entirely new sculpt to accurately reflect the armor’s design in the movie. The sculpt is based on the 3D models of the suit created for the movie, so it should be pretty much spot on. However, there are a few areas that are noticeably off. The wrists are a tad too skinny, as are the elbows, which makes it hard to believe a person is actually inside the suit. Also, the eyes are just a tad too large to be accurate. It’s not terribly noticeable in person, but quite obvious in photos. Their only the slightest bit off, but it makes quite a difference at this scale. Those issues aside, the rest of the figure’s sculpt looks pretty much dead on.

The paintwork on the figure is phenomenal, but is once again different from most HT work. On this figure, it’s absolutely imperative that the paint be exactly on the mark, otherwise the figure won’t have the appropriate machined look to him. HT has pulled this off excellently, with nothing out of place. They’ve even added a few small dings and scratches to make the armor look slightly used. Everything looks really great!

The Mark VII includes a huge selection of accessories, even getting more than the usual HT faire. He features:

  • An unmasked head w/ armored collar
  • 6 interchangeable hands
  • Extra wrist armor for repulsor hands
  • Battle-damaged faceplate
  • Battle-damaged chestplate
  • Interchangeable arms with lasers deployed
  • Battle-damaged shoulder pads
  • 3 interchangeable sets of Thigh armor
  • 2 Wrist rocket launchers
  • 3 interchangeable sets of shoulder mounted armor
  • A display stand

The unmasked head is not unexpected, as it has become the standard for a HT Iron Man release. Robert Downey Jr must have a difficult likeness to capture, as HT has never quite had his look down. This one ends up being a bit off the mark. It’s an odd case where it’s not a bad Tony Stark sculpt, but it has only a vague resemblance to the actor who plays him in the movies. I don’t hate it, but it’s not HT’s finest work. From a technical standpoint, it’s great. There’s some wonderful texture work, and it looks like a real person, just not the one they’re going for. The paint is up to HT’s usual standard, which is certainly nice to see. The collar piece slips fairly easily over the neck and the whole thing attaches to the MVII body without too much trouble.

There are six hands: two fists, two articulated, and two repulsor. All of them look great, and match the rest of the body wonderfully. I like the articulated ones in particular, as they provide the greatest variety of poses. The repulsor hands have been specially sculpted to allow you to depict Iron Man with his hands in blast mode as shown in lots of promotional material, and they have their own set of wrist plates to aid in this effect.

The figure also includes several pieces to allow him to be displayed in a “Battle-Damaged” mode. These pieces range from simple repaints of normal pieces to complete resculpts. They swap out with relative ease, and look pretty good when in place.

The thigh and shoulder armor come in three possible sets: closed, fully deployed, and removed. The closed is what the figure comes wearing, as they depict the default look. The deployed fit well with the Battle-Damaged set-up, for that middle of the battle look, and the removed allow for the figure to be streamlined. All of the pieces swap out pretty easily, though they’ve also included a small tool to help remove the pieces without risk of damage.

Lastly, Tony includes a basic display stand with Mark VII printed on the front and the Avengers logo on the base. It’s a simple piece, but it helps connect him with the rest of the figures from the set.

THE ME HALF OF THE EQUATION

Like most of my other HT figures, the Mark VII was ordered via Sideshow Toys’ website. I had not initially planned on picking this figure up, as I had intended to make do with my earlier Mech Test Tony Stark from the first Iron Man. However, as I got further into the Avengers line, I realized that the display wouldn’t look right without a proper Iron Man. So, I waited until I was certain I’d have the money and placed a pre-order for the Mark VII. I’m glad I decided to go for it. The figure was definitely on the expensive side, even for a HT figure, but I honestly feel he was worth it. He’s the best version of the character available, and he has a lot of display options to keep things interesting. And the truth is, he is Iron Man…

#0243: Wolverine – Spy

Posted by Ethan Wilson in Reviews and tagged with , , , ,

WOLVERINE V – SPY WOLVERINE

X-MEN

SpyWolverine

You can’t venture far into a discussion about X-Men without running into Wolverine. This is even more true when it comes to the X-Men in the 90s, when Wolverine was at insane levels of popularity. As a young, impressionable child at the time, I was of course a huge fan of the character. More recently, I’ve started to enjoy the character less and less, mostly due to his severe over-exposure, but he’s spawned more than a few action figures, and I can always appreciate a good action figure. So, is today’s figure a “good action figure?” Let’s find out!

THE FIGURE ITSELF

This is the fifth version of Wolverine released in Toybiz’s X-Men line. He was part of the fourth series of the line. The figure stands about 5 inches tall and features 11 points of articulation, as well as a mechanism that raises his arms when his torso is rotated. You know, for claw-slashin’ and the like. This particular version of Wolverine is based on his “spy” look from his time working for Weapon X. The sculpt appears to be unique to the figure, though it is possible that the head may have been shared with one of the other Wolverine figures from the line. It’s not a bad sculpt, and it fits in nicely with the rest of the line style-wise. His goggles and com-link thingy are attached via a swivel joint, so they can be swung out of his face or removed all together. Unfortunately, they end up being a bit on the large side, which makes Wolverine look more like a snorkeler than a spy. The paint work is fairly minimal, but it’s mostly applied pretty well. The face, however, seems to have gotten the worst of it. He’s kind of got this wide-eyed stare, and his pupils look way too big, which makes him look a bit high. Makes you wonder exactly what kind of stuff Weapon X had him on. Maybe that’s why he can’t remember his past! Wolverine comes packed with 6 knife-type weapons, which can be stored in the various slots on his uniform. How convenient.

THE ME HALF OF THE EQUATION

Wolverine is yet another figure purchased from the Balticon dealer’s room this past Memorial Day. Like yesterday’s Iceman, I got him because I didn’t already have him, and he was $3. He’s not as good a figure as either of the Icemen, but I suppose he’s not terrible. I certainly won’t be singing the figure’s praises, though I will admit I got quite a laugh upon removing the goggles and seeing those eyes staring back at me.

SpyWolverine2

#0242: Iceman -Armored

Posted by Ethan Wilson in Reviews and tagged with , , , ,

ICEMAN – ARMORED

X-MEN

IcemanArmored

Like I said yesterday, the 90s X-Men line was very important to me when I was growing up. It’s still one of my favorite lines, and I still enjoy picking up figures I don’t have when I see them. Today, I’m looking at another version of founding X-Man, Iceman. Let’s have a look!

THE FIGURE ITSELF

Iceman was released as part of the “Mutant Armor” Series of the Toybiz X- Men line. Or, if you’re a fan of typos on mass released toys, the “Muntant Armor” Series. The figure stands around 5 inches tall and features 9 points of articulation, as well as an action feature that allows the height of the ice on his back to be raised. The figure is based primarily on Iceman’s design from the 90s X-Men crossover “Age of Apocalypse.” The figure creates this look by reusing the body of Iceman II, released in the “Invasion” series of the X-Men line, with a new head. The body is a nice replication of the “spiky” look that Iceman sported for a good portion of the 90s. The head features the character’s mouth-less look from the crossover, which looks pretty cool! The figure’s paint is a little uneven, in all honesty. They’ve attempted to do an air-brushed mist look on the figure, but it doesn’t really work. It’s really heavy on the head and neck, but practically non-existent on the rest of the figure, which makes for a jarring change. Being part of the “Mutant Armor” Series, Iceman is packed with hand and feet attachments to armor him up.

THE ME HALF OF THE EQUATION

Just like the last 3 reviews, this Iceman was purchased from the Balticon dealer’s room. I mostly picked him up because he was a 5-inch X-Men figure I didn’t already have, and he was $3. He’s a pretty neat figure, and probably one of the more interestingly sculpted figures in the line. He was definitely worth the purchase!

#0241: Iceman

Posted by Ethan Wilson in Reviews and tagged with , , , ,

ICEMAN

X-MEN

Iceman

I’m not quite sure how much I’ve touched on this, but Toybiz’s X-Men line from the 90s was incredibly important to forming my collecting habits. It was a very expansive line, and offered me the opportunity to own almost every character from the 90s cartoon in plastic form. To this day, it remains one of my all-time favorite lines of figures. Sure, some of the figure’s haven’t aged the greatest, but they instill me with lots of fond memories. Today, I’ll be taking a look at the coolest X-Man around, Iceman!

THE FIGURE ITSELF

This version of Iceman was actually released twice. Once in the third series of Toybiz’s X-Men line, and later as part of another X-Men line released exclusively to Kaybee Toys a few years later. This particular is from the later release, but the two figures are virtually indistinguishable. The figure stands just shy of 5 inches tall and features 9 points of articulation. The figure is based on Iceman’s classic design, but the cuffed boots seem to indicate his late silver age design. The figure is molded in clear plastic so as to replicate Bobby in his full ice mode, after he learned how to actually transform himself into ice. The sculpting is actually pretty good for an early 90s piece, though his hands do seem a little bit on the large side. Still, the figure has a grade blocky sculpt that really makes him look like he’s been chiseled out of ice. The paint work is pretty simple but what’s there is pretty good. They’ve used some white paint to do some “icicle” detailing. It looks a bit strange to be honest, but it’s not too apparent when the figure is on display. Iceman includes a stand shaped like an ice sled. There’s a block around the foot pegs that could be filled with water, which could in turn be frozen around the figure’s feet, allowing you to make an actual ice sled. It’s gimmicky, but it’s an entertaining gimmick at least.

THE ME HALF OF THE EQUATION

This figure was purchased in the Balticon dealer’s room this past Memorial Day. This is actually the second of this figure I’ve bought. I got the first one years ago from Kaybee Toys. However, I used that one’s freeze gimmick numerous times, and little did I know that this would cause the figure’s clear plastic to become more brittle. My poor first figure’s legs bot snapped off at the hips, which was a serious bummer (that’s actually him in the Wilson photo; you can even see the apoxy holding his legs in place). When I saw this figure in a box with a bunch of other 5 inch X-Men, I was more than happy to once again have this guy in my collection. I certainly won’t be putting this one in the freezer!

#0238: Gambit & Psylocke

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

PSYLOCKE & GAMBIT

MARVEL MINIMATES

Gambit&Psylock

When in doubt, I always turn to Minimates. I find the reviews to generally be a bit easier to write and I can be a little more enthusiastic about them, so they make for better writing in general (at least I sure hope so…). Today marks another Marvel Minimates review. This time around, I’m pulling from the great big world of X-Men with loveable rogue (who is coincidentally loved by Rogue) Gambit, and psychic fighter Psylocke!

THE FIGURES THMSELVES

Psylocke and Gambit were released in series 28 of Marvel Minimates. Originally, this was meant to be series 26 and it would have served as a loose tie-in to X-Men Origins: Wolverine, but it was pushed back to 28 when Diamond picked up the license to do Minimates directly from the movie.

PSYLOCKE

Psylocke is built on the basic Minimate body, which, means she stands about 2 ½ inches tall and she has 14 points of articulation. She’s based on Psylocke’s Jim Lee designed look from the early 90s, right around the time that she became Japanese (just go with it). She features two sculpted add-ons: a hair piece and a sash. The hair was originally sculpted for one of the BSG Starbucks, but it was actually released on Psylocke first. The sash may be a re-use, but I don’t know for sure. The paint work is pretty good overall, no slop or bleed over to speak of. One issue is the face seems a bit too narrow, like the paint mask wasn’t applied properly. Psylocke includes a katana, previously seen with Blade, and a “psy knife” which slips over her hand peg.

GAMBIT

Like Psylocke, Gambit is also built on the basic Minimate body. He’s based on Gambit’s default look through much of the 80s and 90s, which is the look most people associate with the character. The figure features a brand new trench coat piece, an all-new hair/headband piece, and a set of new boots. Lots of new stuff.  I do kind of wish that the bib wasn’t a part of the coat, but it looks pretty good. I do love how well they captured Gambit’s mop of unruly hair. The paint work is passable. There’s a bit of slop on the hands, and his face seems a tad too high on the head, but the torso detailing and the pink squares on the legs look great. Gambit included two spate hands with different charged cards and his fighting staff.

THE ME HALF OF THE EQUATION

This is another set of Minimates I picked up from Cosmic Comix when it was first released. I had eagerly been awaiting series 28, especially after taking part in and winning several prizes in a contest to guess this and series 25’s lineups. This isn’t my favorite version of Psylocke, but it’s not too bad, and Gambit is a character I’ve had an attachment to ever since the 90s animated series.

#0237: Agent Jasper Sitwell & Batroc

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

AGENT JASPER SITWELL & BATROC

MARVEL MINIMATESJasper&Batroc

Today marks the final entry in my reviews of the Captain America: The Winter Soldier Minimates. It’s okay. We can get through this together. I started off a bit rocky with Classic Cap & Winter Soldier, regained some of my momentum with Black Widow & Falcon, and was more than pleased with Stealth Cap & Rumlow, but the excitement I have for this series has remained with me throughout all of my reviews. I’m a little sad that there aren’t a never ending supply of these figures to review, but I think I’ve saved the best for last here. Today, I’ll be looking at Agent Jasper Sitwell & Batroc. Due to the nature of this set, I’ll be getting into some SPOILERS for the movie, so if you haven’t seen it yet, you’ve been warned.

 

 

THE FIGURES THEMSELVES

Agent Sitwell and Batroc were released in Marvel Minimates Series 55, which was a tie-in to Captain America: The Winter Soldier. This set was released one per case, so it’s a little harder to come by than the other three.

AGENT JASPER SITWELL

JasperSitwellIn the comics, Jasper Sitwell was the SHIELD agent assigned to Tony Stark, he drove a flying car, and he was meant to be that “normal” guy amongst the crazy. Sound familiar? Yeah, Jasper was the proto-Coulson. When Coulson took his place in the movie-verse, I just assumed he’d be replacing Jasper outright. But, Marvel decided to put Jasper in the mix anyway, and he served as a supporting character in Thor and the first three Marvel One-Shots, before showing up on Agents of SHIELD, and eventually in Captain America: The Winter Soldier, which proved to be his end, after he was revealed to be a covert Hydra agent. But, hey maybe he’s actually working for SHIELD…. and he could have totally survived being thrown in front of an oncoming tractor trailer. Yeah, I’m sure he’s fine.  Jasper was built on the standard Minimate body, so he has 14 points of articulation, and he stands about 2 ½ inches tall. He’s a mostly vanilla figure, with just a sculpted coat piece and tie, which have been seen on numerous suited figures before him. They do their job well enough, and look appropriate for a standard issue SHIELD suit. Paint is also pretty basic, with some paint for his tie and belt buckle, which look pretty decent, though there is some slop on the shirt collar from the tie. The best part of the figure is the detailing on the face, which is a spot on likeness of Maximiliano Hernàndez. Truly amazing work. Jasper includes a hand gun, a briefcase, and a clear display stand.

BATROC

BatrocGeorges Batroc, or as he’s known in the comics “Batroc the Leaper” (Batroc ze Leper if you go heavy on the French accent), is a character I never thought I’d see on the big screen. Even when I heard he was in the movie, I assumed he’d just be some generic thug who dressed in black. There was no way he’d actually leap around, right? Or wear even a semblance of his comic book costume, right? Well, I was wrong, and I’ve never been happier to be so. Batroc’s fight with Cap near the beginning is one of my favorite parts of the movie, hands down. Batroc is presented here in his look from that portion of the movie. He’s built on the standard Minimate body, with sculpted vest, belt, and holster add-ons. The holster is a re-use from Series 45’s Maria Hill, but the vest and belt look to be all-new. They look great, and are very accurate to Batroc’s gear from the film. Batroc features some superb paint work, with nearly every surface covered in detail. Most impressive is his head, which features his five-o-clock shadow and his buzz cut, both depicted through some excellent use of pointillism (every once in a while, my former art major kicks in). I also love the fact that the yellow and purple detailing of the uniform continues under the vest, giving you a decent start to a comic styled Batroc if you want one. Batroc includes a hand gun, and a clear display stand.

THE ME HALF OF THE EQUATION

Sadly, due to their one per case nature coupled with my being out of town, I was unable to get Jasper and Batroc with the rest of Series 55 from my local comicbook store (It’s okay, I’m fairly certain I know who got the set, and I know it went to a good home.) Fortunately, I was able to get ahold of one from Luke’s Toystore, my favorite Minimates retailer. I’m glad I was able to get this set because it’s the highlight of the series for me. Sure, the others are all solid sets, and I wouldn’t want to have missed any of them, but this set just makes me smile. Diamond could have easily phoned it in on these two, but they really brought their A-game, and this set is total win because of it.

I just wrote over 800 words about a Jasper Sitwell & Batroc the Leaper two-pack. Based on their appearance in a multi-million dollar film, no less! I cannot begin to tell you how much that thrills me.

BatrocVSCap

#0236: Captain America – Stealth Uniform & Brock Rumlow

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CAPTAIN AMERICA – STEALTH UNIFORM & BROCK RUMLOW

MARVEL MINIMATES

Cap&Rumlow

You’ve read my reviews for the first two sets in the Captain America: The Winter Soldier Minimates line-up. Today’s part three. The excitement from the first two parts still remains, but I think I’ve gotten pretty good at keeping my composure. Hopefully. Anyway, I’m looking at yet another Captain America, plus SHIELD agent Brock Rumlow *SPOILER*

…one of the movie’s villains. Do they keep the excitement going? Let’s find out!

THE FIGURES THEMSELVES

Cap and Rumlow were released as part of Marvel Minimates Series 55, which was done as a tie-in to this summer’s Captain America: The Winter Soldier.

CAPTAIN AMERICA – STEALTH UNIFORM

CapStealthCap is built on the standard Minimate body, which means he stands about 2 ½ inches tall and features 14 points of articulation. He’s based on Cap’s stealth look from the movie, which has also been referred to as his “STRIKE Team” look. It’s what he wears during the film’s opening mission and during most of his scenes at the SHIELD headquarters, and it’s also the look seen on most of the promotional stuff for the movie. To convey this look, the figure features sculpted helmet, shoulder harness, wrist straps and belt add-ons, in addition to the base Minimate body. The wrist straps appear to be a re-use from Series 34’s 90s Cyclops, but everything else looks to be brand-new to this figure. Everything seems to be accurate to Cap’s look in the film, and there is plenty of sculpted detail work on each piece. The paint work on Cap is pretty good, though there are a few spots of error. The silver detailing of the “A” on his helmet doesn’t quite line up with the sculpted boarders and there are a few instances of underlying colors not lining up with the detail lines. Also, the wings on the sides of his helmet have been left unpainted, but this seems to be consistent across all versions of this figure. Other than that, the paint work is very nice. All the detail lines are nice and crisp, the likeness on the face presents and uncanny resemblance to Chris Evans, and some of the small details on the uniform are nothing short of amazing. Cap is accessorized with a spare hairpiece, an extra hand for holding the shield, a display stand, and, of course, his mighty shield, this time in stealth colors.

BROCK RUMLOW

RumlowRumlow is built on the same base body as Cap, which means he has the same articulation and relative height. For those of you less in the know with Cap stuff, Rumlow is a SHIELD agent destined to become the villain Crossbones, who worked as the Red Skull’s right-hand man and has been a recurring Captain America villain for many years. His figure here is based on his look in the movie, in his “pre-Crossbones” form, and specifically takes Rumlow’s look from the movie’s final act. A lot of the figures in this series take their looks from that portion of the movie, so it’s nice to see Rumlow stick with the theme. Rumlow features sculpted hair, vest, belt, and holster add-ons to aid with the look. The hair is a re-use from Series 17’s Eddie Brock, and the holsters are from Series 45’s Maria Hill. The belt might be a re-use, but it’s a bit too generic for me to tell. The vest appears to be an all-new piece. All of these parts go together well, and result in a pretty much spot on figure of the character. The paint work on Rumlow is good, but not spotless. The paint on his gloves is splotchy and the edges of his boots have very fuzzy lines, but the detail work is superb, just like the rest of the series. The vest can be removed to show the straps that he had under his vest in the movie, which is a nice touch. Rumlow is accessorized with two hand guns, a sub machine gun, his electro-shock thingy, and a clear display stand.

THE ME HALF OF THE EQUATION

As I’ve mentioned in previous reviews, I was out of town for the release of this series. Thankfully, my dad was nice enough to get a set of them for me, which was very cool of him. I really liked Cap’s stealth suit in the movie, so I’m happy to see that it turned out well, and that it wasn’t plagued by the same paint issues as the Classic Cap. I was also happy to get Rumlow, who has been over looked by other lines based on the movie. He was a fairly important character in the movie, and the Minimate is a great representation of him. All in all, this set is more in line with Widow and Falcon, which is a good thing. I’m happy to see Diamond putting such amazing work into this line.

#0235: Black Widow & Falcon

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BLACK WIDOW & FALCON

MARVEL MINIMATES

Widow&Falcon

Okay, so I already went through my immense excitement at the existence of Captain America: The Winter Soldier Minimates yesterday. I shan’t subject you to that again. I’m still really excited, but I’m keeping my composure. Promise. Today, I’ll be looking at Cap’s two most trusted allies in the film, and the biggest push for me to get the Minimates: Black Widow and Falcon!

THE FIGURES THEMSELVES

Widow and Falcon were released as part of Marvel Minimates Series 55, which was released as a tie-in series for Captain America: The Winter Soldier.

BLACK WIDOW

Widow

Black Widow is built on the standard Minimate body. This means she features 14 points of articulation and stands about 2 ½ inches tall. She’s presented here in her SHIELD jumpsuit look that she sports early in the film and in the final act. I was actually a bit surprised by how little she has this look, but it’s definitely the one to go for if you’re doing an action figure. She features six sculpted add-ons: hair, belt, two holsters, and two widow’s stingers. The holsters where originally used on the Avengers movie version of Widow, but I believe everything else is new to this figure. I was actually a bit surprised to see a new sculpt for the stingers, but I guess they thought they could use an update. The new pieces all look pretty great, with nice detail work and a decent amount of accuracy to the movie. The paint on Widow is pretty great. The detail lines are all really sharp, and the base paint is better here than it was on Cap. I did notice some slight bleed over from the whites of her eyes, but it’s actually not too bad, and it’s hardly noticeable. I also love the fact that they’ve given her a more “battle-ready” facial expression, as opposed to the more vacant expression a lot of female figures get. It really adds some character. Widow includes two hand guns and a clear display stand.

FALCON

FalconLike Widow, Falcon is built on the standard Minimate body, so he has the usual height and articulation. Falcon is based on the character’s look during the final act of the film. It’s the character’s true “Falcon” look, so it’s a good choice. He features eight sculpted add-ons: goggles, gloves, a jetpack/harness, two shoulder pad/upper wing pieces, and two lower wing pieces. With the exception of the gloves, which were previously seen on the Age of Ultron Nick Fury, all the pieces are brand new to Falcon. They all look pretty great, and are very accurate to the source material. I’ve seen a few complaints that the harness is too bulky, but the harness from the movie looks pretty bulky to me, so that seems about right. The paint work on Falcon is overall great, with one exception. While he head has a great likeness to actor Anthony Mackie, my figure has a clump of dried paint right on his forehead. Once the goggles are in place, it’s mostly unnoticeable, but it’s still kind of annoying. The rest of the paint work is really great, especially the camo work on his pants. Falcon includes two handguns (different from Widow’s), a flight stand, and a clear display stand.

THE ME HALF OF THE EQUATION

Just like with Cap and Winter Soldier, I was out of town for the release of this series. My dad was nice enough to pick them up for me, which was super awesome of him. I was a little let down by the Cap in the Cap & Winter Soldier set, so I wasn’t sure how the rest of the wave would turn out. I’m happy to say that neither of the figures in this set suffer from the same issues as Cap. That’s very important to me, because having these two particular characters in the same scale is what had me so excited for the Minimates to begin with. These two certainly did not disappoint!

#0234: Captain America – Classic & Winter Soldier

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

CAPTAIN AMERICA – CLASSIC & WINTER SOLDIER

MARVEL MINIMATES

Cap&WinterSoldier

I love Minimates. That’s no secret. I also loved Captain America: The Winter Soldier (I’ve seen it six times). These are things that have been said many times on this site. So why bring them up? BECAUSE I JUST GOT THE MINIMATES FROM CAPTAIN AMERICA: THE WINTER SOLDER! Whoa, sorry about that. I’m very excited. You see, short of spending an insane amount of money on the Hot Toys figures, the Minimates are the only way to get all of the main characters in a single scale. Plus they’re Minimates! Today, I’ll be kicking off my reviews of the series with the film’s two title characters: Captain America and The Winter Soldier!

THE FIGURES THEMSELVES

This set was released as part of Marvel Minimates Series 55, which was a series based on the Captain America: The Winter Soldier film released this summer.

CAPTAIN AMERICA – CLASSIC

CapClassic

Cap, like just about every other Minimate, is built on the standard Minimate body. As such, he stands about 2 ½ inches tall and features 14 points of articulation. This figure depicts Cap in his “classic” costume from the movie, which is the one he wears during the last act of the film. It’s essentially his uniform from The First Avenger, but it tweaks the stripes on the abdomen, brightens the brown areas, and ditches the holster and side-arm from that film. The figure features sculpted helmet and belt add-ons to help facilitate the look. Both of these pieces appear to be new to this figure, sharply sculpted and look spot on to the movie. The paint work on this figure is a bit mixed. To Diamond’s credit, the detail line work is nothing short of amazing. All the lines are nice and sharp, and the level of detailing is just great! They’ve even succeeded in giving us a pretty great Chris Evans likeness. Unfortunately, the base paint work is not so great. The ends of his gloves are very uneven, the colors routinely go out of detail lines, and you can see that the A on the helmet is pretty far off center. Also, my Cap’s helmet has a smear of silver across the nose, which is incredibly distracting. Cap includes a spare hair piece, his mighty shield, a hand to attach the shield to, and a clear display stand.

WINTER SOLDIER

WinterSoldierUnmaskedWinter Soldier is built on the same basic body as Cap, so he has all the same stats there. He depicts the main Winter Soldier look in the film, the same one shown on all the other WS merchandise. Given its presence in most of the Soldier’s important scenes, I’ve got no complaints there. Bucky features five sculpted add-ons: Mask/Hair, shoulder gear, belt, and a holster for both legs. These pieces all look to be new to this figure, and they all seem to do an admirable job replicating Bucky’s look in the movie. The mask perhaps sits a bit too low, but it’s not so low that it ruins the figure. Bucky seems to have come out a bit better than Cap in the paint department. Like Cap, all of the detail lines are really sharp, and the work on the legs in particular is quite impressive. The Sebastian Stan likeness is much better this time than it was on Diamond’s version of Bucky from the first film. On a side note: Am I the only one that didn’t really notice the eye shadow in the movie? I saw it in one or two scenes, but it was mostly absent. Yet, every single figure has it caked on there. Fortunately, it’s handled pretty well here, nowhere near the monstrosity that was the Hasbro version. The best part of this figure is his accessory selection. He’s armed to the teeth, with a sniper rifle, two sub machine guns, a hand gun, and two knives, plus an alternate hairpiece without the mask and a clear display stand thrown in for good measure! One additional thing I might have liked to have seen is a hair piece without the goggles, to replicate his look from his first fight with Cap, but I wouldn’t want to be too greedy.

THE ME HALF OF THE EQUATION

This series was originally supposed to be released closer to the film’s opening weekend, but was met with a few delays. They were finally released the first week in June, while I happened to be out of town. Fortunately, my awesome dad picked them up for me the day they came out. He even brought them with him when he came to bring me home!

While I’m not quite as happy with the paint on Cap as I’d have liked, the overall work on these figures is pretty great, and Winter Soldier is at the very least the most accurate version of the character available, if not the best! I’m hopeful that the issues with Cap are more or less limited to my set, as I’d hate to see this be a widespread issue.