Tag Archives: Marvel

#2231: Daredevil & Kingpin

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

DAREDEVIL & KINGPIN

MARVEL MINIMATES

Despite the general “lower tier” nature of the first series of Marvel Minimates‘ character selection, at least in terms of the corners of the universe they chose to focus on, there’s no denying that within the theme itself, they did go for a pretty heavy-hitter assortment.  We got both halves of the Hulk persona, plus Daredevil with perhaps his two best know supporting cast members.  Elektra was packed with DD’s first costume, but his standard reds were packed with long-time foe Wilson Fisk, aka the Kingpin!

THE FIGURES THEMSELVES

Daredevil and Kingpin were the final two-pack in Series 1 of Marvel Minimates.  Kingpin would remain exclusive to the specialty pack-outs (at least for the first year of the line), while Daredevil was available in TRU’s Boxed Sets assortment, as well as by himself in the Shop-Ko-exclusive singles assortment.

DAREDEVIL

Daredevil’s all-red attire fairly quickly replaced his somewhat gawdy yellow number, and quickly became his go-to look for quite a few years.  By 2003, there had been an attempt to replace it, but it was back to being his main look once again.  The figure uses the original Marvel base-body (long feet and all), so he’s 2 1/4 inches tall and has 14 points of articulation.  From a construction standpoint, he and the Yellow Daredevil are identical, both using the same mask and belt add-on pieces.  They were definitely solid pieces, especially for the more simplified aesthetic of early ‘mates.  Red DD’s paint work is comparatively far less complex, since he’s mostly just molded in the appropriate red.  They do mix things up a little bit by giving him at least some cursory detailing on the boots and gloves, and he’s got the same full face under the mask.  He includes the same billy clubs as Yellow, but in red this time around.

KINGPIN

Beginning as a Spider-Man foe before being adopted as Daredevil’s arch-nemesis, Kingpin was a pretty natural inclusion here, and ended up as the only version of the character in the line for almost a decade.  Of all the ‘mates at launch, he’s probably the one that strays the furthest from the standard Minimate form, getting a rather large add-on piece for his torso, in order to properly capture his size.  This means that he ends up far more properly scaled than Hulk from the same assortment, and is probably one of the main things that kept him acceptable for mixing with later ‘mates for quite so long.  In addition to the torso, he also got a unique pair of hands.  The right holds a cigar, while the second is sporting an impressive gold ring.  The paintwork on Fisk is surprisingly involved, with by far the most detailed face of the first series, plus actual pin-stripes on his legs.  Kingpin was packed with a curved cane, which seems a little simpler than Fisk’s usual fare, but is a cool extra nonetheless.

THE ME HALF OF THE EQUATION

Though I got the other two sets when they were brand new, it was another five or six years before I finally added this pair to my collection, courtesy of a friend who found them while she was doing some cleanout of her house.  I don’t really know why it took me as long as it did to get them, but I was happy to finally have them at the time.  Ultimately, there are improved versions of both figures in this set, so neither is truly essential.  That said, they do round out the collection nicely, and cap off the first series of the line very well.

#2229: Punisher War Machine

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

PUNISHER WAR MACHINE

MARVEL LEGENDS (HASBRO)

“After the fall of War Machine, Frank Castle acquires the highly-weaponized armor and makes it his own.”

Hey, that’s actually a pretty succinct summation of the character in that bio.  Good for Hasbro!  Punisher War Machine is a pretty straight forward concept: you put Frank Castle in the War Machine armor, and boom, there it is.  It’s not like you need a ton of explanation, and quite frankly, it was one of the less out there change-ups to the Punisher status quo.  Guy’s been a freaking Frankenstien; this is nothing.  Well, that’s not entirely true.  It’s not “nothing,” it’s actually a pretty great marketing opportunity, as well as a pretty easy variant for toy makers.  On the high end, we’ve got a Hot Toys version on the way, and on the low end we’ve also got the Legends treatment.

THE FIGURE ITSELF

Punisher War Machine is another Fan Channel-exclusive Marvel Legends offering, and is in fact the second version of Frank Castle to be offered in this assortment of figures.  The figure stands 6 1/2 inches tall and he has 31 points of articulation.  After getting a few new pieces, even though they may have been minor, this Punisher returns to the straight repaint style for the line-up.  He’s a straight repaint of the surprisingly under-utilized Mk003 War Machine mold from Civil War.  Previously, the mold only got released in a Target-exclusive two-pack, which is a bit surprising given that it was all-new at the time.  The armor isn’t a perfect match for the armor Frank grabbed in the comics; that one was more patterned on the design from IM2, with maybe a bit of AoU thrown in.  I’d guess that it came down to mold availability; the IM2 molds are probably hard to access at this point, and I doubt if anyone really wants a fourth release of the Mk002 mold.  This one is close enough, and honestly one of Hasbro’s best WM molds, at least prior to the Endgame release.  There’s a little bit of limitation to what you can do with the articulation, and the guns, baton, and cannon don’t stay in place quite as securely as I’d like.  Also, he’s from before they got on board with standardizing neck pegs, so his joint’s too small to work with any of the Frank Castle heads (the one I shot for this review is just resting in place).   Overall, though, he’s a very workable figure.  It’s definitely the  slickest War Machine sculpt Hasbro’s produced, and it holds up well even a few years later.  The paintwork on this figure is, of course, where all of the actual changes are.  He’s not terribly far removed from the standard War Machine layout, but gets Frank’s usual skull insignia on the front, plus a few other skulls littered throughout the armor as a kill count.  He also has a little more wear and tear represented than the prior release, showing how hard on the armor Frank’s been.  The only real complaint I have is that they’ve left the helmet pretty much alone, when it should really be sporting a white skull motif on the face plate.  It does undersell the Punisher bit a little.  This figure has the same accessories as the last release of the mold, so he gets a fully engaged version of the baton and an extra set of hands in gripping poses.

THE ME HALF OF THE EQUATION

Like I said in my review of the Endgame War Machine, I never picked up the Civil War figure, and I was always a little regretful of that.  So, I was pretty happy when I found out that this figure would be using the mold, thereby allowing me to add it to my collection.  I’m not the world’s biggest Punisher fan or the world’s biggest War Machine fan, but I can appreciate a lot about this figure.  Ultimately, I’m pretty happy with him.

Punisher War Machine was purchased from my sponsors over at All Time Toys.  If your looking for other Legends or other toys both old and new, please check out their website and their eBay storefront.

#2228: X-Force Deathlok

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

X-FORCE DEATHLOK

MARVEL LEGENDS (HASBRO)

“The X-Force joins forces with a rogue Deathlok unit to face an army of Deathlok cyborgs.”

Hasbro’s Fan Channel exclusives for Legends began as a few one-off figures and quickly evolved into what essentially is a series of its own, just split up into single releases.  The defining element amongst them is relying heavily on parts re-use, which has certainly led to some eclectic choices.  Who would have thought that we would one day be able to say you could choose between three different Marvel Legends Deathlok figures?  Certainly not me, but hey, here we are.

THE FIGURE ITSELF

X-Force Deathlok is one of the later announcements for the Fan Channel-exclusive Legends releases, and is probably the most odd-ball and out there.  Others were either heavy hitter characters or tweaks of difficult to acquire figures from earlier in the line.  Deathlok is neither of those, being c-list at best, and with a figure released just over a year ago that’s hardly difficult to come by.  Whatever the case, he got another figure.  I guess it’s that X-Force tie; it makes everything easier to sell.  Whatever the case, this figure is based on “Deathlok Prime” from Rick Remender’s run on X-Force, who is apparently a distinct-ish character from previous Deathloks.  How about that?  The figure stands 6 1/2 inches tall and has 32 points of articulation.  Structurally, this figure is about 99% identical to the previous Deathlok.  The only change between the two is a slight re-working on the upper torso to change the flag on the original to the X-logo seen here.  Beyond that, the two figures are the same.  Honestly, that’s not a bad thing, because it was a great sculpt then, and it’s still a great sculpt now.  The paint marks the real change-ups for this figure.  He goes from the slightly more colorful classic Deathlok to the standard stealthy X-Force colors, but also improves a some of the apps on the exposed skin of the face, giving him a more proper zombified appearance.  Deathlok gets the same two guns as his prior release, pretty much the same in deco, apart from the ammo belt becoming a translucent yellow.  He also gets the shotgun-style rifle from Bishop, which is a solid addition to his arsenal.

THE ME HALF OF THE EQUATION

I really liked the first release of the mold, and I do dig the X-Force sub-set we’ve been getting throughout the last year.  I like having another chance to appreciate this guy, and he’s honestly pretty fun, even if there’s not a lot new going on with him.

Deathlok came from my friends at All Time Toys.  If you’re looking for other Legends, or other toys both old and new, please check out their website and their eBay storefront.

#2217: Bruce Banner & Hulk

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BRUCE BANNER & HULK

MARVEL MINIMATES

The very first assortment of Marvel Minimates is perhaps a bit odd-ball when looking back on things.  No Spider-Man, Iron Man, Captain America, or even X-Men.  Nope, it’s two sets of Daredevil and one set of Hulk.  Why this particular line-up for the debut?  Well, the first series of Marvel Minimates hit in the summer of 2003.  Do you know what else hit in 2003?  Movies for both Daredevil and Hulk, and though those films may not be looked back on particularly fondly these days, they did make their title characters recognizable to a general audience, thereby making them a moderately reasonable starting point.  Today, I’m looking at the slight outlier of the line-up, the one Hulk pack in the lot, pairing off both the Hulk and his human alter-ego, Bruce Banner.

THE FIGURES THEMSELVES

Bruce Banner and Hulk were, as noted above, part of the first series of Marvel Minimates.  It’s worth noting that the numbering was really little more than clerical on the first three series of the line, with all of them hitting pretty much at the same time, but nevertheless, these guys were technically among the first.

BRUCE BANNER

Alter-egos were popular fodder for the early ‘mates, with Hulk, Spider-Man, and Wolverine all getting their civilian counterparts right out of the gate.  Banner makes the most sense, I suppose, though, since he’s so visually different, and the internal struggle between the two halves is so important to the story.  While Bruce has had a lot of different appearances over the years, this one opts for something more in line with how he looked on the cover of his first appearance, with glasses and a lab coat.  It’s certainly a bit more visually interesting than just plain civilian clothes.  The figure uses the old-style ‘mate body, complete with long feet, so he stands roughly 2 1/4 inches tall and has 14 points of articulation.  He’s got two add-on pieces: one for his hair/glasses, and one for his jacket.  The hair/glasses combo is different from how things would be handled later, since glasses tend to just be printed on the faces now.  Additionally, the glasses are opaque, which gives him a very different, far more stylized appearance than later figures.  I myself have always been a pretty big fan of this look.  The jacket’s a little on the bulky side, but if you don’t like it, the shirt and the arms are both white, so you can remove it without it looking too weird.  Banner’s paintwork is rather simple, with some detailing for his face, his tie on his shirt (complete with tie clip), and a belt buckle on his pelvis.  Banner included no accessories.

HULK

Definitely the selling point of this set, and honestly the more dated of the two offerings.  Hulk represents the old style of doing things, back when ‘mates were still firmly planted on the philosophy of using the least amount of extra parts possible for each figure.  For larger characters, such as Hulk and Venom, this left them looking…kinda small.  Compared to Hulk, puny Banner wasn’t very puny.  Hulk’s only add-on was his hair piece, which is a decent enough part, although it does come off a lot, since the pegs weren’t implemented until Series 8 of the line.  It’s simple, but feels classically Hulk.  His paint is a little more involved than Banner, with detailing on the front and back of his torso, as well as remnants of his torn shirt running all along the sides of his pelvis, and torn legs to his pants running along the shins.  The feet and lower legs are painted green, rather than molded, which looks noticeably of a different shade.  Also, for some reason, the shade of purple on the pants is different between Hulk and Banner, something I never really understood.  Like Banner, Hulk had no accessories.

THE ME HALF OF THE EQUATION

When my dad brought home the Yellow Daredevil and Elektra set for me back in 2003, he also brought with him a Hulk and Banner set for my younger brother, which gave me a taste of the set.  I would eventually get a pack of my own as a birthday present from some family friends that same year.  I still have those two, but they’re a little worse for wear these days, so I actually picked up a replacement set when All Time got in a Minimate collection a few months ago.  If I’m honest, the Hulk in this set never did a lot for me, but conversely the Banner has always been one of my favorites from the early line up.

#2213: Bishop

Posted by Ethan Wilson in Reviews and tagged with , , , ,

BISHOP

X-MEN (TOY BIZ)

“Accidentally wrenched back through several decades by the time-twisting evil mutant named Fitzroy, Bishop arrived in our era from one of Earth’s many possible futures. Bishop survived the battle that followed, thanks to his mutant ability to absorb the energy attacks of others and turn that power back against his foes. Stranded in our time, Bishop has added his might to that of the present-day X-Men by joining their Gold Team!”

The X-Men really just became a haven for displaced time-travelers, didn’t they?  Also guys with vague, unrelated “cool” names that were just common place words, and whose abilities translated to “has a gun”.  All of these things nicely describe Bishop, an uber ’90s character, who could only be more ’90s if he wore a leather jacket and had shoulder pads.  I suppose he got off easy in that regard.  Bishop was prominent enough in the ’90s to feature on X-Men: The Animated Series, and by extension find his way into Toy Biz’s line of X-Men figures from the same period, getting what would be his very first action figure.  I’ll be taking a look at that figure today!

THE FIGURE ITSELF

Bishop was initially released as part of Series 4 of the X-Men line, and would see subsequent re-release in the Marvel Universe line and as part of a multi-pack with Wolverine and Gambit.  All three releases of the figure are functionally identical, but it’s worth noting that mine is a Series 4 release.  Bishop is sporting his primary look from the ’90s, which was the only one he had at the time of the figure’s release.  The figure stands 5 inches tall and he has 9 points of articulation.  Though he’s rocking a waist swivel, he loses movement in his neck, presumably due to his hair.  Curiously, though, the Deluxe 10-inch figure and 2 1/2-inch Steel Mutants figure that are both patterned on the same sculpt both had a neck joint, so why it was missing from this guy is anyone’s guess.  Beyond that, the sculpt is fairly typical for the time.  He’s super bulky, but that’s just Bishop.  I will say that they were starting to run into the limits of this slightly simpler style of elbow joint they used, since it’s a little small for such a large arm.  It works overall, though.  The detailing on the hair is pretty nice, and definitely does his very dated hair cut proud.  Bishop’s paintwork is fairly basic, and a little bit messy on my figure.  There’s a lot of fuzzy edges, and the yellow sections are definitely prone to some serious bleedover.  In 1996, Bishop was also re-issued as part of the “Flashback” assortment, which was all repaints.  For that release, his blue was swapped for grey and black, and his yellow for gold, and his skintone was made somewhat lighter.  There was a second, predominantly red deco also shown, but it never hit shelves.  Whatever the case, the paint is a little cleaner on that release, but of course the trade off is that he’s not in his classic colors any more.  Whichever release you get, Bishop included two large blaster rifles in black, and features a “Quick-Draw Weapon Release” action feature.  Press the button on his back and his right arm swings upward.

THE ME HALF OF THE EQUATION

I didn’t have Bishop as a kid, largely because his episodes of the cartoon were some of my least favorite, so I never formed much of an enjoyment of the character.  That said, I really dig the ’90s X-Men line and I’m slowly working through building a complete collection, which meant getting this guy at some point, right?  I found both versions of Bishop at a toy show a while back, allowing me to close off that corner of the X-Mythos in one fell swoop, I suppose.  He’s not really one of the better Toy Biz X-Men, but then he’s far from the worst.  He fills in the roster pretty nicely.

Check out this review’s Flashback Friday Figure Addendum here!

#2211: Punisher

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

PUNISHER

MARVEL LEGENDS (HASBRO)

“Frank Castle takes to the streets and delivers brutal vigilante justice as The Punisher.”

I haven’t reviewed a Punisher figure in over a year, which on one hand seems a little weird, but on the other hand is surprisingly frequent for a character I owned exactly one figure of for the first 20 years of my collecting.  Classically, I wasn’t much of a fan of the character.  It wasn’t until he was introduced in Netflix’s Daredevil show that I truly started to appreciate the character. Since then, I’ve gotten quite a few more Punishers, including today’s offering, another Marvel Legends release.

THE FIGURE ITSELF

Punisher is another Fan Channel-exclusive Marvel Legends release.  Interestingly, it’s one of two Frank Castles to be included in the Fan Channel line-up of figures, the other being the Punisher War Machine. This one goes for a more gritty, urban look for the character.  Not being super familiar with the character’s comic exploits, I don’t know if it’s a reference to a specific look, or just a slightly more real-world adaptation of his usual design.  It’s a cool look whatever it is.  The figure stands about 6 1/2 inches tall and he has 30 points of articulation.  While the previous Fan Channel figure have been pretty straight re-decos, Punisher mixes things up a little bit, not by being a new figure, but rather by being a mix of a number of prior figures.  He uses the torso and legs of the Netfilx Punisher, the arms from Scourge, the heads from the Walgreens Punisher, and the vest from the RoML Ultimate Captain America.  It all adds up to a fairly tactical looking take on Frank, especially depending on which head you opt to go with.  I personally feel that if you ditch the vest and give him the head with the headband, he looks a bit like he’s going for a Solid Snake cosplay, which I have no issues with at all.  The paintwork for this guy is rather involved, with camo on the pants, and a rather distressed skull on the torso.  The two heads also get two very different paint schemes.  The slicked back hair head gets skull-styled face paint to match the torso, which is fun, while the headband head gets some serious bags under his eyes, and some pretty intense scruff, making it look like he’s been going for a while.  Of the two I prefer the headband myself, but I love having two diverse options.  In addition to having the two different heads, Punisher is also packed with an assault rifle, a handgun, and a sniper rifle.  All of them are re-used, but they’re pretty nice, and he actually has an easier time holding his weapons than a lot of prior figures.

THE ME HALF OF THE EQUATION

In a similar fashion to yesterday’s Wolverine, I wasn’t really sure I needed to get this figure when he was first shown off.  The other Fan Channel figures are a little more on the exciting side, and this guy also had the misfortune of arriving alongside Havok, who definitely got most of the attention.  That being said, I did still like the concept on this guy, and the exectution’s definitely a lot of fun.  I’ve still got a soft spot for that spandex look, but there’s no denying that this is a cool look for Frank.

I picked up this guy from my friends All Time Toys.  If you’re looking for cool toys both old and new, please check out their website and their eBay Store.

#2210: Wolverine

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

WOLVERINE

MARVEL LEGENDS (HASBRO)

“Wolverine is a nearly indestructible mutant with a gruff attitude and the formidable skills to back it up.”

There have been no shortage of Wolverine action figures, even when just looking through the narrow lens of Marvel Legends.  In the last year, there have been six separate Legends Wolverines (with a seventh right around the corner).  That places him second only to Spider-Man for Legends releases, which is really quite a bit.  I’d say there’s a little bit of Wolverine overload going on for a good portion of the fanbase, and I definitely include myself in that grouping.  But hey, it’s okay, this one has a new hat!

THE FIGURE ITSELF

Wolverine was officially the first of the Fan Channel exclusive Marvel Legends, though exactly what order they actually hit in is a little bit fluid.  He was the first one to be shown off, though.  After a number of different costumed variants throughout the year, this one goes for a civilian Wolverine, rocking the jeans and the wifebeater.  But also that hat.  The hat is very important.  The figure stands 6 inches tall and he has 30 points of articulation.  From the neck down, this figure is the same as the Legendary Riders release from last year (which I never picked up), itself a retooling of the Old Man Logan (which I *did* pick up).  It’s really not a bad body, and this particular release is really crisp on the texturing of the shirt and pants, which looks really good.  My figure does have a slight molding issue on his torso, so there’s a little bit of plastic missing at the collar of his shirt.  It’s fairly minor, and confined just to mine, but it’s something to keep an eye out for.  The body’s not the main focus of this release, though.  No, no, we gotta talk about what really matters: the new hat! Yes, Logan’s sporting a cowboy hat, an item he’s frequently seen sporting in the comics, but has largely been absent from his action figure coverage.  It is admittedly a pretty distinctive look, and the head that it’s permanently affixed to isn’t a half bad unmasked Logan either.  I actually really dig the grin; it’s a nice change of pace from the usual growls, screams, and grimaces we get for the character, and yet this is still very true to Logan, especially the more relaxed civilian take we’ve got going here.  Wolverine’s paintwork is fairly decently handled.  He swaps out the white shirt from the Riders release for black, which I think actually looks pretty cool.  Beyond that, it’s fairly standard stuff.  Wolverine is packed with an extra head (the same as the head from the Madripor Wolverine, but without the weird eye stuff), a set of gripping hands without the claws, and the Muramasa blade.

THE ME HALF OF THE EQUATION

Wolverine overload is a thing that’s been plaguing my Legends collecting since Toy Biz first added him to the line in Series 3, and it was the primary reason I didn’t buy the Riders release last year.  With Madripor and X-Force, I almost waffled on this one too, but I like the civilian look enough that he felt worth it.  Ultimately, I do quite like this figure, and I think he’s the best of the 2019 Wolverines.  Sure, he’s another Wolverine, but at least he’s a decent figure in his own right, and I didn’t have to pay for the motorcycle to get this one.

I picked up this Wolverine from my friends at All Time Toys, and he’s currently in stock here.  If you’re looking for Marvel Legends, or other toys both old and new, please check out their website and their eBay storefront.

#2209: Agent Anti-Venom

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

AGENT ANTI-VENOM

MARVEL LEGENDS (HASBRO)

“After exposure to the Anti-Venom Serum, Flash Thompson becomes the newest incarnation of the anti-hero.”

Back at the beginning of the Infinite Series relaunch of Legends, when Walgreens was dipping their foot in the waters of being a toy-buying destination, their first trial-run exclusive was Agent Venom, a figure that Hasbro had had rattling around their con displays for a little while.  He proved a successful venture, for Walgreens and Hasbro at least, but perhaps a little bit less so for fans, as he never really hit anywhere in truly huge numbers, and Walgreens was still not quite as numerous at the time as it is now.  This, coupled with the general fan-favorite nature of the character, made him slightly pricey on the after market.  Hasbro, ever in the game of trying to give collectors a fair shot at hard to find Legends took advantage of the re-branding of Flash Thompson under the Anti-Venom name from a few years ago, along with a need for some easy parts re-use figures, and has given us another Agent Venom, albeit of the inverted variety.

THE FIGURE ITSELF

Agent Anti-Venom is another Fan Channel single Marvel Legends release, much like the Big Time Spider-Man I looked at a few weeks ago.  The figure stands about 6 1/4 inches tall and he has 32 points of articulation.  Structurally, this figure is identical to the standard Agent Venom from back in 2014.  From a design standpoint, this makes sense, since the looks are just color swaps of each other in the comics.  However, from a toy standpoint, there are some issues that come with this re-use, namely that the underlying body was outdated when the first Agent Venom came out.  The five years since then have only made that more apparent, as a handful of similarly built and far more up-to-date bodies have come into use.  Of course, that would have required some pretty substantial retooling of the Agent Venom-specific parts, which would have then defeated Hasbro’s whole purpose of releasing figures that don’t need any new parts.  I will say that this release has far less rubbery plastic than the first one, which does make him feel better overall.  Additionally, the new paint apps are a lot cleaner in terms of application than the last time around, making for a much slicker looking figure, and showcasing the great strides Hasbro has made in terms of paint since the Infinite Series days.  Agent Anti-Venom is packed with a pair of glocks and a pair of MP5s, as well as the back piece that can hold his weapons for him.  I still feel like he should have 6 guns instead of 4, but at least I was prepared for it this time.

THE ME HALF OF THE EQUATION

I was fortunate enough to get the original Agent Venom release, but a lot of people weren’t, so I wasn’t surprised when this guy was listed amongst the Fan Channel figures.  While I do wish they’d been able to change out the underlying body, I won’t deny that the changes in production quality on this figure do a lot to make him even better than his predecessor, and he’s still a lot of fun.

This guy was purchased from my friends at All Time Toys, and it’s currently available from their store, here. And, if you’re looking for other toys both old and new, please check out their website and their eBay storefront.

#2208: Deadpool & Hit-Monkey

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

DEADPOOL & HIT-MONKEY

MARVEL LEGENDS (HASBRO)

“The most bodacious team-up this side of Miami: Deadpool & Hit-Monkey make being an internationally feared assassin look easy.”

There’s no denying that Deadpool has popularity and recognition behind him, which makes him an easy pick when it comes to merchandise.  It also makes him useful leverage for getting retailers to support other items, meaning that for every time that we get the likes of yesterday’s Havok and Polaris, we also get the likes of today’s offering, a Deadpool-centric two-pack, pairing him off with one of Marvel’s many attempts at spinning other goofy characters out of Deadpool, Hit-Monkey.

THE FIGURES THEMSELVES

Deadpool and Hit-Monkey are the other half of the Fan Channel-exclusive assortment of Marvel Legends that contained Havok and Polaris, also bearing the “80 Years of Marvel” branding, and clearly meant to capture a more modern piece of Marvel history, though if it’s a reference to a specific comics occurrence, I will admit I’m not familiar with it.

DEADPOOL

There have been quite a few Deadpools in the last two years of Legends, but this one does manage to actually be a little more distinctive, mostly by being in something other than a variation of his standard costume.  This one embraces the vague Miami: Vice theme of the set by sticking Wade in an all-white suit, which is admittedly a pretty striking look for the character.  The figure stands 6 1/4 inches tall and he has 32 points of articulation.  Wade makes use of the newly re-worked suit body that we got with Nick Fury, which is a pretty decent upgrade on the prior body, and now scales a little bit better with Bucky Cap-sized heads like Deadpool.  Topping off the body, he’s got a selection of three different heads: fully masked, fully unmasked (both from the Juggernaut Series Deadpool), and half-masked.  They make for a nice variety of options, and it’s good to see Hasbro really taking advantage of that bank of existing parts for stuff like this.  Deadpool’s paintwork is pretty straight forward and clean, and keeps with the striking nature of the design.  The reds are very bright, keeping with the Sasquatch and Sauron assortment coloring, which I’m okay with, even if they don’t quite match the Deadpool Corps release from earlier this year.  The unmasked head actually gets pupils this time, and while I myself prefer the prior deco, I do like getting a change-up here.  Deadpool is packed with a solid selection of accessories, which includes two katanas (same as prior DPs), a pink zebra-patterned handgun, a guitar (re-used from Spider-UK, and in a funky Madcap color scheme), headphones (re-used from Star-Lord), a Captain America shield with Deadpool’s face painted on it, and a re-worked RC Silvermane with Headpool in Silvermane’s place.  There’s no new parts in here, but that doesn’t change how impressive it is to get this many extras.

HIT-MONKEY

Not long after Hit-Monkey’s debut in the comics, he found himself chosen as one of Hasbro’s smaller-scale BaFs from the tail end of the pre-Infinite Series Legends.  As with everything from that period, distribution was spotty, making completing him either woefully easy or near impossible, and crafting quite an odd after market.  Whatever the case, I suppose Hasbro felt they should give fans another chance at the character, so here he is.  The figure stands just shy of 3 1/2 inches tall and he has 24 points of articulation.  His sculpt is the same as it was the first time around, which is reasonable enough.  Hit-Monkey’s really only had that one look.  The sculpt is a little bit more stylized than Legends tend to be these days, but for a character like this, that’s honestly not a bad thing.  Given the alternative being the rather bland and off looking Spider-Ham we got last year, I’m more for this.  The figure changes things up from the last release by swapping the color of his suit from black to white, and the tie from blue to red, all in order to match the Deadpool.  Again, no clue if Hit-Monkey’s ever looked like this, but it works out alright for him.  Hit-Monkey includes the same accessories as the first time around: a pair of pistols and a pair of submachine guns.  Not quite as impressive as Deadpool, but two sets of guns is still pretty good.

THE ME HALF OF THE EQUATION

I wanted Havok and Polaris, and this set just sort of came along with them, I suppose.  I wasn’t exactly expecting much of anything from either of them, and that probably worked out in their favor, because it allowed me to really approach them with fresh eyes, and just enjoy them for what they are.  What they are is pretty fun.  It’s a cool look for Deadpool, a second chance at Hit-Monkey, and a boatload of really fun extras between them.

This set was purchased from my friends at All Time Toys. And, if you’re looking for other toys both old and new, please check out their website and their eBay storefront.

#2207: Havok & Polaris

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

HAVOK & POLARIS

MARVEL LEGENDS (HASBRO)

Originally launched in 1986 as a way to re-unite the original founding five members of the X-Men, X-Factor found itself in a slightly tricky spot when it was decided to fold the founding five back into the main X-team in 1991.  With the X-books at the height of their popularity, Marvel wasn’t looking to just drop one of them entirely, meaning they would need a new roster of characters, but a selection of characters that were not going to be at all claimed by the two main X-books.  This new X-Factor was a government sanctioned team of mutants made up largely of second-string X-Men characters who had been rattling around in the background of the main book for most of the ’80s.  Taking Cyclops and Jean Grey’s role as the romantically-involved core of the team were Cyclops’ brother Havok and his on-again-off-again love interest Polaris, both of whom were recovering from a few bouts of “brainwashed and evil.”  The series would prove quite successful in elevating all of the characters included within, Havok and Polaris among them.  And, with most of the founding ’90s X-Men covered, now Marvel Legends is moving onto X-Factor.  Nice!

THE FIGURES THEMSELVES

Havok and Polaris are one of two Fan Channel-exclusive two-packs of Marvel Legends, loosely built into Hasbro’s celebration of 80 years of Marvel.  This particular set’s packaging is noted as a throwback to the trading cards of the ’90s, which is admittedly a pretty fun, pretty vibrant idea.  I still don’t care what these figures arrive in as long as the toys themselves are good, but I can appreciate Hasbro honoring some of Marvel’s past exploits, and these are certainly a good pair of figures to tie-in with the trading card craze of the ’90s.  Okay, enough about the cardboard that carries these things, onto the figures!

HAVOK

“Alex Summers is an Alpha level mutant with the power to absorb cosmic energy and convert it to plasma.”

I hope you guys are appreciating the calm nature I have maintained up until this point in the review.  Truly I am a master of my own emotions because HOLY CRAP THEY MADE IT THEY ACTUALLY MADE IT THEY MADE A MARVEL LEGENDS HAVOK IN HIS 90S COSTUME AND NOW I HAVE IT AND ITS MINE AND NO ONE CAN TAKE THAT FROM ME…well, I made it pretty far, I guess.  So, as the above shouting on my part may have cued you in, this would be Havok, wearing his attire from the ’90s X-Factor series, or at least a version of it.  The initial X-Factor costumes were designed to play well with the main team costumes from Lee’s X-Men book, but were not quite an exact match, and they also tended to change a little from issue to issue.  Havok’s design seen here is from around the time of the X-Tinction Agenda cross-over, which is when they added the yellow leg-straps to his design.  Given the whole cross-marketing synergy thing of the ’90s, it’s this version of the design that got used for the old Toy Biz figure, appeared on the cartoon, and generally gets picked up if their doing a ’90s Havok anywhere else, so it’s really the one everyone knows.  This is Havok’s third time as a Legend, though he’s never gotten one in this costume.  In fact, this is only the third time we’ve gotten a toy of this costume (there will also be a fourth later this year).  The figure stands 6 1/4 inches tall and he has 32 points of articulation.  Like the last Havok and also the Lee-style Cyclops, this figure is built on the Bucky Cap body, which is a sensible enough choice for Alex.  He gets a boatload of new pieces, though, with a new head and arms, plus add-ons for the jacket and belt.  The new pieces are all pretty fantastic, with the jacket and arms in particular really standing out to me, because they just capture that feel of the old 5-inch figure, right down to the overly defined forearms.  I also really like how the jacket clips shut at the front, but can be opened to allow for better use of his mid-torso joint.  I have exactly two complaints about the sculpt, both minor, and only one of them actually new.  The forearms, as nice as they are, do seem to connect a little oddly to the fists.  It feels like there should be a cuff piece there to join them, and that would actually be more accurate to the source material.  Of course, if you’re like me and you have that Madripor Wolverine with his ill-fitting glove cuffs, I would point out that they fit pretty much perfectly on this figure, and greatly improve his already awesome appearance.  My other complaint is kind of a hold over from a prior figure.  Havok re-uses the leg straps from Cyclops, which is sensible from a consistency standpoint, but also means that he’s got the same troubles with them staying in place that figure did.  That said, I’m used to them now, and there are possible fixes, such as gluing them in place, which could help.  Havok’s paintwork is actually quite impressive.  For the most part, it’s fairly basic work all throughout, but there’s some really strong work on the jacket, which does a nice fade from blue to black.  It’s subtle and it really works.  Havok is packed with a pair of effects pieces, which are the same as the ones from his last figure, but in yellow this time.

POLARIS

“Like her father Magneto, Lorna Dane has the mutant ability to control magnetism.”

Okay, so I promise to keep myself a little more reserved on this part.  It’s just Polaris, and much as I love Polaris, she’s not quite a ’90s Havok.  Polaris has had a slightly less fortunate time with action figures over the years, with her first two action figures both being repaints of Rogue figures.  She did get a dedicated Legends release in the Warlock Series, but that one was met with a lot of in-fighting about the costume choice, and ended up hanging around a lot of places, which put a serious question mark on this costume’s release.  Also, unlike Havok, Polaris’ X-Factor design didn’t quite follow the same structured look, so there are more options to choose from.  Hasbro opted to go with her first one for this release, which it’s worth noting is also the one that was on the cartoon, making it a pretty sensible choice.  The figure stands a little over 6 inches tall and she has 27 points of articulation.  She uses the same base body as the last Polaris (yay for internal consistency), but gets a new head, torso, and upper arms, as well as add-ons for her wrist and boot cuffs.  The new parts mesh well with the old, and the torso and arms in particular exhibit a good range of motion, improving upon the standard pieces for his body.  The hair manages to capture the dynamic flow of the illustrations, while not being too restrictive to the movement or weighing her head down too much either.  Polaris’ paint work is nice and vibrant, and in particular I love that bright green they’ve chosen for the hair.  The dullness of the last one was one of my few complaints, and this one ends up looking a lot nice.  Polaris is packed with two sets of hands in open and closed poses, as well as the same effects pieces included with Havok, but this time in green.  I do wish they had come up with some more effects options, especially for two differently powered characters in the same pack, but this has admittedly been an issue since their solo-releases.

THE ME HALF OF THE EQUATION

Oh boy, was this set a big deal for me.  Frequent readers of the site are no doubt aware that I’m a *pretty* big Havok fan, to the point where I literally own every figure of him (plus six copies of his ’90s figure just on its own).  I’ve been waiting for this particular Havok since before there were any Legends Havok figures at all, and in fact even made my own back in 2005.  I didn’t realize how long I’d be waiting for an official release.  Polaris is somewhat along for the ride, but I was certainly happy to get her too. These two are great releases, and Havok is probably my favorite Legends figure to date.  I’ve been saying that a lot recently, but he’s really good.

These two came from my friends at All Time Toys, who knew enough enough about my Havok craze to give me the heads up on its release.  Yay for me!  If you’re looking for cool toys both old and new, please check out their website and their eBay Store.