Tag Archives: Minimates

#0959: Guy Gardner & Kilowog

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

GUY GARDNER & KILOWOG

DC MINIMATES

Guy&Kilowog1

Today, I’ll be taking another look at the somewhat sad tale of DC Minimates. The line was amazing when it was new, and showed a ton of promise. And then, after eight series, it ended, and despite lots and lots (I mean LOTS) of requests, there’s been no return in the eight years since its demise. As amazing as it seemed at the time, the failure of DC Minimates seems pretty obvious looking back. In a desperate attempt to play catch-up with Marvel (who had a 15 series lead at this point), DC Direct frontloaded the line, by putting just about every heavy hitter in the first three series. This presented a bit of a problem for later series, as finding anchor figures was no simple task. As such, Series 4 and 5 went more or less anchor-less, instead relying on characters who were stand-ins for the heavy hitters. One such example is today’s set, which features the original stand-in Green Lantern, Guy Gardner, along with everyone’s favorite Poozer trainer, Kilowog!

THE FIGURES THEMSELVES

Guy and Kilowog were released in Series 5 of DC Minimates. Due to the prominence of the Green Lantern books at the time, they were probably the best known pair in Series 5. That’s probably a first for either of them.

GUY GARDNER

Guy&Kilowog2Guy Gardner was originally introduced as the “back-up” Green Lantern of sector 2814, who was supposed to take over for Hal Jordan, should anything bad happen to him. Presumably, this was only if Hal was incapacitated in some way other than death, though, since the comics have established that there’s a different process in place for replacing a dead Lantern. When he first appeared, Guy really wasn’t much different than Hal. Which kinda makes sense when you think about it. However, when they decided to have Guy be more than a one-shot wonder, his personality was changed, to make him a bit more unique. Also a bit more surly, cocky, and all-around less friendly. It was at this point that Guy got a new, more ‘80s vintage design, which is the basis of this Minimate. The figure is a little shy of 2 ½ inches tall and has 12 points of articulation. He has 7 add-on pieces for is hair, vest, belt, boots, and the edges of his gloves. The wristbands, belt, and boots were re-used from a number of earlier figures, but the hair and vest are unique to Guy. They’re a pretty good approximation of Guy’s look in the comics, though the hair feels like it could use a touch more detail work. Guy’s paintwork is fairly straight forward. His colors are pretty well chosen, and the details are all nice and sharp. His face does seem just a touch high on the head, causing the eyebrows to be covered by the hair. Guy was packed with a smaller lantern power battery, the same as Hal’s.

KILOWOG

Guy&Kilowog3Kilowog is a surprisingly recent addition to the Green Lantern mythos, first showing up in the late ‘80s. He was around for less than a decade, before being killed by Hal Jordan during the horribly written Emerald Twilight. He then spent another decade or so being dead, but was brought back to life a few years before Green Lantern: Rebirth restored the GL Corps to its former glory. Despite being out of the game for quite a while, Kilowog is still one of the most prominent Green Lanterns. Kilowog uses his post-Rebirth design, which was mostly based on his DCAU look. The figure is built on the larger 2 ½ inch base body, since he was a pretty sizeable guy. It’s a little odd to see this body nowadays, but it’s not too bad for Kilowog. He has a unique head, which, aside from seeming a little squat, is a pretty good fit. He also has a bulkier add-on piece for his torso, which makes him a bit more imposing than some of the others to use the larger body. Though it has no character specific details, Kilowog was the only figure to use it. Kilowog’s paint isn’t too far removed from what Guy has. He uses all the same shades and such, which is good for consistency’s sake. His logo is slightly different than the ones seen on Guy and Hal, which is nice, since Kilowog sports his modern design. Kilowog was packed with a larger power battery (re-used from DCD’s Pocket Heroes line).

THE ME HALF OF THE EQUATION

Like every set in the DC Minimates line, I picked these two up from Cosmic Comix the week they were released. As both a Green Lantern geek and a Minimates geek, I was pretty excited for these two. That being said, neither of them is super stand out. I mean, they’re solid ‘mates, especially for the time, but they don’t do anything particularly noteworthy…which is probably why the pegwarmed pretty hard. Not bad little figures, though.

#0953: Captain America & Winter Soldier

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

CAPTAIN AMERICA & WINTER SOLDIER

MARVEL MINIMATES

Cap&WSCW1

As big a movie as it was, one of the best parts of Captain America: Civil War was that it didn’t abandon the plot threads of its predecessor, The Winter Soldier. Cap and Bucky’s friendship was front and center, and their desire to look out for each other forms the emotional core of the film. Neither character is a stranger to toys, but they’ve gotten a few movie specific figures, including some Minimates, which I’ll be looking at today.

THE FIGURES THEMSELVES

Captain America and Winter Soldier are part of Marvel Minimates Series 66, which is the first of two series based on Captain America: Civil War. Like Panther & Iron Man, these two are one of the sets shared between the specialty and TRU assortments.

CAPTAIN AMERICA

Cap&WSCW2Cap’s STRIKE Suit in The Winter Soldier is generally viewed as one of the stronger MCU designs, so it’s not a shock that his subsequent looks have been tweaks on that design. His Civil War design isn’t much different than his AoU design, just with a few minor changes here and there. Because of the similarity in designs, this Cap and the Series 61 Cap are constructed from the same selection of pieces: add-ons for the helmet, harness, belt, and gloves.  These are all pretty great pieces, and they work very nicely capturing Cap’s onscreen design. Cap’s paintwork is also pretty strong. His costume is exquisitely detailed, and the linework is some of the sharpest that I’ve seen on a Minimate in some time. There’s some minor issue with the basic color work, such as the misplaced “A” on the forehead and the slight bleed over from the brown of the gloves onto the “fingers.” However, the overall paint looks pretty solid. Under the mask, there’s a very angry Steve Rogers, which matches up well with the Mark 46’s Tony expression. For accessories, Cap includes his shield, a shield-bearing hand, an extra hairpiece for an unmasked look, and a clear display stand.

WINTER SOLDIER

Cap&WSCW3Though he might seem a little lacking compared to his pack -mate’s eight different MCU-based Minimates, Bucky here has still gotten three MCU-mates of his own. This one is based on Bucky’s look from the back half of the film. It’s admittedly not quite as exciting a look as the one he was sporting in Winter Soldier, but it’s not terrible. The figure is about 2 ½ inches tall and he has 14 points of articulation. Bucky has two add-on pieces, both re-used: one for his hair and on for the bottom bit of his jacket. The hair isn’t quite a perfect match (since his hair’s a bit shorter this time than it was last time), but it’s close enough to work. Bucky’s paint isn’t quite as solid as Cap’s. A lot of it’s the design, which just doesn’t allow for as many fun details, but there are also a few instances of slop or smears, most noticeably the red star on his shoulder. In addition, there’s one notable flaw: his left hand. The fingers should be silver, since that’s his robotic side, but the figure gives fleshy fingers to both hands. It’s a rather simple mistake, and not too difficult to correct. The likeness on the face is a bit generic, but there’s some definite resemblance to Sebastian Stan. In terms of accessories, this Winter Soldier is a little lacking compared to the last movie’s version. He includes a pistol, an SMG, two knives, and a clear display stand. That’s an okay assortment, but I feel like a rifle would have been a better fit.

THE ME HALF OF THE EQUATION

This set was picked up at the same time as Panther and Iron Man. I don’t find this set to be quite as strong as that one, but it’s not bad. Cap’s a pretty strong figure. He’s not super different from the AoU version, but he definitely has a superior paint job. I think that the Series 55 version of Winter Soldier is still my preferred version, but this one’s still a pretty solid ‘mate.

#0952: Black Panther & Iron Man

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

BLACK PANTHER & IRON MAN – MARK 46

MARVEL MINIMATES

PantherIM1

It’s not really news to the regular followers of this site, but I really, really enjoyed Captain America: Civil War. While it was still undeniably Cap’s movie, the supporting players really stood out. One of the best parts of the movie was Black Panther, who was introduced into the MCU with a standout performance from Chadwick Boseman. I can’t wait to see more of this guy! Until his solo Black Panther movie hits, I’ll just have to hold myself over with some of his toys. Though I haven’t yet found his awesome looking Marvel Legends figure, I did manage to snag his Minimate, which I’ll be looking at today, along with his pack-mate Iron Man.

THE FIGURES THEMSELVES

Panther and Iron Man were released in Series 66 of the Marvel Minimates line. The whole series is based on Captain America: Civil War. These two are also one of the shared sets between the specialty and TRU assortments.*

BLACK PANTHER

PantherIM2Amazingly enough, is is only Black Panther’s third appearance as a Minimate. He hasn’t shown up since Series 29! This one is, unsurprisingly, based on his movie appearance. Admittedly, it’s not very far off from his basic comics appearance, so he could really work as either version in a pinch. The figure stands about 2 ½ inches tall and has the usual 14 points of articulation. Panther’s only add-on is his mask, which is the same piece used by the last two Panther ‘mates. It’s a well-sculpted, simplistic piece, which suits the character very well. It’s too bad he didn’t get a set of clawed hands as well, but that’s a fairly minor nit. The rest of Panther’s detailing is done via paintwork, and it’s some pretty exceptional work at that. There’s a ton of small detail work to make up the unique texturing of Panther’s costume in the movie, and I love how much depth the variations of finish give him. Under the mask, there’s a fully detailed head, with painted on hair and ears. It’s not a perfect likeness of Boseman as T’Challa; for some reason he’s missing his facial hair (which appears to be the case with the Legends figure as well), and his expression is also a bit bland. But, it’s still a nice touch, and adds an extra bit of coolness to the figure. Panther’s only accessory is a clear display stand. It seems a bit light, but I’m not really sure what else they could have given him.

IRON MAN – MARK 46

PantherIM3Tony Stark really likes tweaking his armor. The Mark 46 serves as his only armor during the course of Civil War (I believe this is the first time he’s only had one). It’s not too far removed from the Mark 45, which he wore at the end of Age of Ultron. However, there are a few minor differences, most of which seem to be there to help bulk Tony up so he doesn’t look too overpowered by Cap. As a Minimate, the Mark 46 is built from the same pieces as the Marks 42 and 43, minus the chest piece. That means he’s got add-ons for his helmet, gloves, pelvis, and boots, as well as a non-standard set of upper arms. It’s not my favorite set of pieces, and the selection isn’t a spot-on recreation of what’s seen in the film (there are way too many join lines), but the end result isn’t too bad. The upper arms are still very limiting in terms of articulation, but the effect is at least somewhat lessened by the omission of the chest plate. The paint does a lot to really sell this figure. The colors of red and gold chosen work pretty nicely together, and the detail lines all do a good job of recreating the on-screen armor. There’s a bit of slop on the arms, but it’s all minor and fairly unnoticeable. Under the helmet, there’s a very angry Tony Stark face. I like the change of expression, though I do wonder why he’s lacking the black eye that Tony was sporting during all of his armored scenes. Iron Man is packed with a spare hair piece, a flying stand, and a clear display stand.

THE ME HALF OF THE EQUATION

I picked these two up from Cosmic Comix the week they were released. Amusingly enough, it was actually on the way to take Super Awesome Girlfriend to see the movie. Panther’s definitely the selling point of this set. He’s a new addition to the MCU subset of ‘mates, and the first shot a lot of newer collectors have had at a Black Panther Minimate. He’s also just a pretty solid ‘mate all around. Iron Man’s certainly not a bad addition, but there’s so many Iron Men out there that this one blends in with the crowd a bit. He’s really not bad, and he may well be my favorite MCU Iron Man. He’s just not super thrilling is all. Still, this is definitely a fun set!

*Amusingly enough, in a similar fashion to the Hawkeye/Vision set, the first Black Panther ‘mate was packed with an Iron Man variant.  History repeats!

 

#0949: Iron Man Now! & Indestructible Hulk

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

IRON MAN NOW! & INDESTRUCTIBLE HULK

MARVEL MINIMATES

IM&HulkNow1

Okay, today’s another Minimates review. It’s also another Marvel review, another Iron Man review, and another Hulk review. None of those are particularly rare things for this site, so I’ll admit that I’m running out of things to say about them. So, umm, here’s a review of some Iron Man and Hulk Minimates?

THE FIGURES THEMSELVES

These two were part of the 16th series of Toys R Us exclusive Marvel Minimates. The series was complementary to Series 51 of the main line, and both series were based on the “ Marvel Now!” relaunch from 2013.

IRON MAN NOW!

IM&HulkNow3Though he didn’t get his first ‘mate until Series 6, Iron Man’s become one of the most frequently produced characters in Marvel Minimates. Fortunately, Iron Man’s had lots of diverse looks over the years, which keeps his ‘mates from getting too redundant. This figure stands about 2 ½ inches tall and gas 12 points of articulation. He’s based on his Now! look, which was also the inspiration of the Iron Man in the Hulkbuster Series of Marvel Legends. While that figure used Greg Land’s (traced) interiors for its reference (allowing for the figure to be a simple repaint), this figure seems to draw a bit more from the initial (and far more interesting) design for the armor. Iron Man has six add-on pieces for his helmet, chest plate, gloves, and boots, as well as non-standard pieces for his upper arms. The boots are re-used from Series 45’s Mark VII Iron Man, but the rest of the pieces were new to this figure. He’s a little on the bulky side, but the figure does a pretty nice job of capturing the look from the initial design sheets. Also, the shoulders limit movement a bit, but at least they’re better than the Mark 42/43/45 shoulders. The paint on this Iron Man is pretty standard. He’s got the appropriate black and gold for this design, with a few spots of red thrown in. The red is a bit sloppy in some areas, but not terrible. Under the helmet, there’s a Tony Stark face, which for some reason has random patches of black on it. I think that’s a story specific thing, but I didn’t read Iron Man’s Now! series, so I honestly can’t say. The Tony face is consistent with the other modern Tony’s we’ve gotten, so that’s good. Marvel Now Iron Man includes both a normal display stand and a rocket blast stand.

INDESTRUCTIBLE HULK

IM&HulkNow2This isn’t the first time I’ve reviewed an Indestructible Hulk Minimate, however, this is chronologically the first of the two produced. This figure presents Hulk in his less armored up appearance, which isn’t quite as exciting a design, but I guess it’s a bit more conventional Hulk. The figure has add-ons for the hair, torso, upper arms, hands, pelvis, upper legs, and feet, and he also has an extra riser piece to make him a little taller. The torso, pelvis, and upper legs are new parts, designed to replicate Hulk’s armored shorts. They’re pretty nicely sculpted, which is good. The rest of the parts are reused, which is alright for the most part. The feet don’t have any toes, which is rather odd looking. Of course, the first 15 Hulks didn’t have toes either, but that was before the move to bulked up Hulks. Hulk’s paintwork is decently handled. The linework seems a little thicker than usual, but it doesn’t look bad. The face is a little odd looking; I’m not sure exactly what his expression is supposed to be. It’s not terrible, but it’s not the greatest. Hulk includes R.O.B. (the Recording Observation Bot), a flight stand (for R.O.B.), and a clear display stand.

THE ME HALF OF THE EQUATION

I picked up this pair from TRU’s online store, along with two other sets from Series 16. It was kind of an impulse buy. I can’t say this is one of my favorite sets. Iron Man’s a decent enough variant, but the armor wasn’t super long-lived, and isn’t very memorable. Ultimately, he’s a solidly done figure of a rather drab design. Hulk’s okay, but he suffers from being the lesser of the two Indestructible Hulks, and that toe thing is just weird. Not a bad set, but nothing to write home about.

#0936: Silver Centurion Iron Man & Crimson Dynamo

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

IRON MAN – SILVER CENTURION & CRIMSON DYNAMO

MARVEL MINIMATES

IMSilvCentDyna1

Hey, how ‘bout another Minimates review? Yeah, that’d be nice, wouldn’t it? And it’s even a Marvel review! I certainly haven’t had many of those recently! Riiiiiiight…

Iron Man is undoubtedly one of the biggest name characters in Marvel’s pantheon now, but that wasn’t always the case. Prior to his first movie, there were only five Iron Men in the whole Minimates line, and absolutely none of his foes were represented. Even with the success of Iron Man, Tony wouldn’t get his own comic-themed series until the release of Iron Man 2, which brought us not only some important armor updates, but also some of Tony’s most prominent foes. Today, I’ll be looking at Silver Centurion Iron Man and longtime foe Crimson Dynamo.

THE FIGURES THEMSELVES

This pair was released in Series 36 of Marvel Minimates. As noted above, the series was released in the summer of 2010 to coincide with Iron Man 2’s release.

IRON MAN – SILVER CENTURION

IMSilvCentDyna2After sticking with more or less the same look for about 20 years, (and then giving said look to James Rhodes after Tony developed a bit of a drinking problem) Tony decided to mix it up and go silver in 1985. While the armor wasn’t incredibly long-lived (lasting about three years real-world time), its rather unique design, and its place in the “Armor Wars” storyline have helped to make it rather memorable. This is actually the second incarnation of this design in the Minimates form. The first was a Previews exclusive, and was from much earlier in the line, so the update was certainly warranted. The figure stands about 2 ¼ inches tall and has 12 points of articulation. He’s built on the usual body, with add-on pieces for his helmet, gloves, belt, and boots. All of these are new pieces, and they do a pretty great job of translating the design from the comics. The helmet is slightly too short for the head, but not terribly so. What’s weird is that the prior Silver Centurion had the same issue, despite they two using two different helmet pieces. Aside from that, he’s pretty great, though. The paint on this guy’s pretty strong. The metallic are in full play, and they make him look really sleek. He’s got a bit of detailing on the faceplate and torso, which look nice. Under the helmet is a full Tony Stark face, which has more than a passing resemblance to Timothy Dalton. To aid in showing off the Tony face, the figure includes a spare hair piece, which has been re-used from Series 31’s Captain Marvel. It’s a pretty pitch-perfect match for Tony’s look from the time, so that’s good.

CRIMSON DYNAMO

IMSilvCentDyna3Dynamo gets my vote for best Iron Man villain, if I’m being honest. That’s probably part of why I wasn’t super wowed by Iron Man 2, since it kind of smashed him together with Whiplash and gave us that weird Mickey Rourke character that graced the screen. I’m kinda still hoping to see a proper Dynamo at some point. At least I got a Minimate out of the deal! This figure’s based on Dmitri Bukharin, the fifth incarnation of Dynamo, who’s probably the most definitive of the possible choices, since he was Dynamo during both “Demon in a Bottle” and “Armor Wars,” and his armor is considered the classic Dynamo armor. The figure has add-ons for the helmet, chest armor, gauntlets, and boots. He’s a bit chunky, but that’s pretty appropriate for this incarnation (and most other incarnations) of the character. There’s some pretty cool details in those parts, and the re-use of the Widow’s Stingers from the Champions version of Black Widow is pretty clever. His paint’s mostly just metallic red up and down (as it should be), but he also has some nice detailing on the chest armor and the visor, as well as a full detailing on the underlying head and torso. The head is what makes it clear that it’s Dmitri; there’s no mistaking that mustache! He also includes an extra hairpiece, re-used from Egon Spengler. Dmitri was often shown bald, but it’s a nice inclusion nonetheless.

THE ME HALF OF THE EQUATION

As with most Marvel Minimates, I got these guys from Cosmic Comix when they were first released. Series 36 was a series I had been looking forward to for quite some time, and this pair was part of why I was so invested in it. There are a few minor flaws here and there, but I remain very happy with this particular pair, and they’re two of my favorite Iron Man-themed ‘mates.

#0933: Orange and Green Blanks

Posted by Ethan Wilson in Reviews and tagged with , , , ,

TRANSLUCENT ORANGE & GREEN BLANKS

PROMO MINIMATES

SDCCY&G1

The Minimates brand is most often associated with the various licenses that Diamond Select has applied its definitive style to. However, as part of their ongoing efforts to get the brand as much recognition as possible, Diamond will occasionally produce promotional “blanks” to be handed out at their various convention appearances, typically the bigger shows, such as San Diego Comic-Con and C2E2. I’ve previously looked at the C2E2-exclusive Minimate Multiverse Blank, so today I’ll be looking at a pair from SDCC.

THE FIGURES THEMSELVES

SDCCY&G2Orange and Green were both given out at SDCC 2008. There was also a red blank available, but I don’t have that one. Both figures stand 2 ¼ inches tall, have 14 points of articulation, and make use of no pieces other than the standard Minimate body. The lack of add-ons makes for a nice showcase of the base body, which can sometimes be overlooked. That’s a shame, because it’s really a very well-crafted bit of work, and it’s just a whole lot of fun to play with. Many earlier blanks stuck with solid, opaque hues, but these two are both done up in translucent colors, which look really SDCCY&G3sharp. Unlike some translucent ‘mates, this pair appears to have been molded in colorless clear plastic and then had some sort of translucent coloring applied after the fact, which does a nice bit to preserve the luminosity of the plastic. They’re also really shiny, which makes them pretty slick. Aside from the colors, they don’t have any other paint; no logos or other details like some promo ‘mates. I think it makes them more enjoyable, if I do say so myself. Elegant simplicity and all that.

THE ME HALF OF THE EQUATION

I didn’t go to SDCC 2008 (though I do own most of the ‘mates that DST offered there), so I got these two a few years later via Luke’s Toy Store. I hadn’t really planned on getting into the Promo ‘Mates, but I had gone far too long without buying any Minimates, so these two (as well as the later 2010 Blue Blank) got added to my order. I legit love these guys. They aren’t the sort of thing that would appeal to everyone, but they’re really cool to me. Despite the fact that they have no add-ons or printed details, they possess a lot of character and personality and remind me of why I like the Minimate aesthetic so much!

#0931: Yukio, Viper, & Black Clan Ninjas

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

URBAN YUKIO, VIPER, & BLACK CLAN NINJAS

MARVEL MINIMATES

YukioViperNinjas1

It seems hard to believe that the second Wolverine film came out three years ago.  Wedged in between Iron Man 3 and Thor: The Dark World, and as the last X-Men film before Days of Future Past overwrote the original timeline, it kind of got lost.  It’s a shame; it’s not a perfect film, but it was a fair bit of fun, and fixed a lot of issues presented by X-Men 3 and Wolverine: Origins.  The movie got a handful of Minimates, and today I’ll be looking at the specialty assortment’s Viper & Black Clan Ninja pack, as well as the variant Urban Yukio & Black Clan Ninja Pack.

THE FIGURES THEMSELVES

These two sets were released in Series 52 of Marvel Minimates, which was based on The Wolverine.

URBAN YUKIO

YukioNinja2Yukio is a relatively minor X-Men character, but she plays an important role in the Wolverine mini-series that the movie based its plot on, so she found herself with a decently sized role.  In the comics, she was just a normal human with ninja training, but the film made her a mutant with the ability to foresee death.  She had two rather distinct looks in the movie (neither of which really resembled her comics appearance).  This figure represents the less formal look that Yukio sports towards the end of the movie. She stands about 2 ½ inches tall and has 14 points of articulation. Yukio has add-on pieces for her hair, skirt, and the tops of her boots.  All of these are re-used, with the hair coming from the TRU Series 9 Magik, the boots coming from Series 34’s 90s Rogue, and the skirt coming from BSG’s President Roslin.  The parts are all fairly decent matches for her look from the film, so the re-use is reasonable here, though the boots have the unintended side effect of making her taller than everyone else in the series. The paintwork on Yukio is decent.  She’s got a lot of color, and she’s pretty bold looking, which is nice.  The detailing on the torso is nice and sharp.  The face doesn’t really look like Rila Fukushima; for some reason, they’ve given her a slight smile, which doesn’t seem right for the character.  That said, the face is nice and sharp, and looks suitably unique. Yukio includes a clear display stand and…nothing else.  Not even a sword.  That’s quite a letdown, especially since Yukio is pretty much never seen without her sword in the film.

VIPER

ViperNinja5Viper was an interesting inclusion in The Wolverine, given that her most prominent role is being highly placed in Hydra, an organization that Fox isn’t allowed to use.  Fox seemed to skirt the issue by only referring to her only as Viper (not her alias Madame Hydra) and by making her a mutant, with no known ties to Hydra.  For this figure, DST based Viper on her look during Yashida’s funeral, which is a rather short-lived look when all is said and done, but we got several others in their funeral attire. Viper has two add-on pieces, one for her hair and one for her skirt.  The skirt is a re-use of the Gwen Stacy skirt from the SM3 series, which is still fairly modern looking.  The hair is a new piece, based on her hair from the scene in the film.  It’s a pretty great sculpt, with a lot of detail, and it captures her look very nicely. Viper’s  paint is overall is nicely handled, at least from a purely technical standpoint.  Everything’s pretty clean, and the line work is all pretty sharp.  The likeness is pretty good; certainly closer than Yukio.  The sunglasses stand out, as the details make them look convincingly shiny.  You can actually make out the reflection of some of the reflections from the funeral’s setting.  All that said, the design is rather drab and not terribly exciting. For accessories, Viper includes a clear display stand, and an extra head, without the sunglasses.

BLACK CLAN NINJAS

YukioNinja3The Black Clan Ninjas took the role occupied by the Hand in the original story.  They were initially supposed to be the Hand, but Fox lost the rights to Daredevil and all associated characters in the middle of production on The Wolverine, necessitating a quick name change.  It’s not like it really matters, though; they’re fairly basic ninjas either way. The Ninjas use add-on pieces for their jackets and the edges of their gloves.  The jacket is a new piece.  It has a scabbard attached to the back, so that they can stow their swords.  The jacket’s a little on the bulky side, but looks alright overall, and captures the basic look from the film pretty well. The paintwork on the Ninja is fairly basic.  It’s mostly just black, though there’s a bit of variation to the finish, which is nice.  The eyes feature an impressive level of detail, and add a nice bit of character, without removing the ability of the figure to be an army builder. The Ninjas each include a basic sword, which can be stowed in the sheath on their back, as well as the usual clear display stand.

THE ME HALF OF THE EQUATION

The Yukio set was one of the ones I wanted from Series 52, but she ended up being a bit difficult to get, so I had to order a full series set from Luke’s Toy Store. This is probably Yukio’s most prominent look from the movie, and it has the advantage of being bright and colorful in a series of mostly drab figures.  However, the lack of accessories knocks her down a peg, and the likeness really isn’t there. Viper is certainly a well put together ‘mate, but the decision to go with her less exciting funeral look over her more comics accurate final battle look hurts the figure.  As it stands, she’s better than you’d expect, but still a bit lackluster. The Ninjas are really the stars of these sets.  They’re fairly simple, but in just the right way, and they benefit from the fact that you don’t even need to be a fan of The Wolverine to like them.

#0923: TRU Aliens Minimates Series 2

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , , , , ,

ELLEN RIPLEY, SCREAMING XENOMORPH, SGT. APONE, GLOWING ALIEN, PVT. DRAKE, & EXTRA-DAMAGED ALIEN

ALIENS MINIMATES

AliensTRU2a

Well, it’s been almost a week since Alien Day, and I’ve started to miss those scary acid-bleedy monsters. So, how about another Aliens review? And, for extra fun, why not some more Minimates? Yeah, that’ll be cool, because I just got this brand-new set of them from Toys R Us. Let’s have a look at them!

THE FIGURES THEMSELVES

These six were released as the second Toys R Us-exclusive series of Aliens Minimates. The pack breakdowns are Ripley and the Screaming Xeno, Apone and the Glowing Alien, and Drake and the Extra-Damaged Alien. Typically, I review Minimates one two-pack at a time, however, all but one of these figures are slightly tweaked versions of previously reviewed ‘mates. Rather than drag them out for the better part of a week, I thought I might as well get them all out of the way, since there’s not much new to review.

ELLEN RIPLEY & SCREAMING XENOMORPH

AliensTRU2b

Ripley’s the real star of the franchise, so it’s not a huge shock that she’s also the human with the most variations. This Ripley is a slight tweak of the Alien 35th Anniversary boxed-set version, reviewed here. The only difference between the two figures is the facial expression, which is a slightly cleaned up version of the Hive Assault Ripley from Series 1. The new face definitely helps her resemble Sigourney Weaver a bit more, resulting in a AliensTRU2eslightly superior figure. That said, the issue with the incorrect hair is still present, and is made more glaring by the fact that this is the second time we’ve seen it happen. Aside from that issue, she’s a pretty solid figure, just like her predecessor. Ripley includes a flamethrower (no flame trail, though), Jonesy the cat, a facehugger, and a clear display stand.

Not to be outdone by Ripley, the Big Chap goes for his fourth variation. This one’s a combination of two of the prior figures: he’s got the paint scheme from the “Crew of the Nostromo” set, with the head from the first set (albeit with the inner mouth removed). Not really much to say about this one, other than to say it’s just as good as all the other Xenos in the line. The figure includes a closed egg and a clear display stand.

SGT. APONE & GLOWING ALIEN

AliensTRU2c

Well, I was wrong. In my review of the Series 1 Apone Minimate, I said he’d likely only get one Minimate appearance, and here he is with his second Minimate. Lucky him. Like Ripley, the only difference between this Apone and his prior ‘mate is his facial expression: he’s turned in his more collected (if still pissed off) expression for a more intense, teeth gritting one. This Apone’s clearly from his final moments in the hive, as he’s caught in a firefight. The resemblance to Al Matthews is lessened a AliensTRU2fbit by the new expression, but it’s not hard to figure out who it’s supposed to be, and the expression is worth the tradeoff. The rest of Apone’s details are identical to the last release, right down to the transposed letters on his USCM patch (it says “USMC”). Apone is packed with his baseball cap, an M41A Pulse Rifle, a newborn alien, and a clear display stand.

The other half of this set is the one truly new figure in this series: the Glowing Alien. No, you didn’t miss a scene in the movie; no aliens ever appear like this. He’s just a fun variant cooked up by DST. Sculpturally, he’s the same as any other Alien from the line (his head is the “Screaming” version). What sets him apart is the clear green plastic he’s been molded in. The figure isn’t just clear green, though; if you let him charge in sunlight for a while (and I mean a good, long while), he lives up to the adjective he’s given by the front of the box and does a bit of glowing. The Glowing Alien includes another egg, also closed.

PVT. DRAKE & EXTRA-DAMAGED ALIEN

AliensTRU2d

Okay, I had kind of figured that Drake might get a second ‘mate, and this one gives me pretty much exactly what I expected. This figure’s more or less the same as the Series 1 Drake; like Ripley and Apone, he just gets a new expression. Instead of the sly grin of the last figure, this one’s mid-yell, that honestly feels a bit more appropriate for Drake. Sadly, Drake is still lacking the flack vest under his armor, instead just sporting the normal fatigues. It wouldn’t be a big issue, if not for the extra pieces included. Drake comes with an extra head, sporting the acid burns he gets at the end of the hive attack. AliensTRU2gAt that point in the film, Drake had ditched his smartgun and its harness, which is when we see the flack vest. Of course, everything about this series points to them being put together as quickly as possible, so there probably just wasn’t time to do a new torso detailing. In addition to the extra head, Drake includes his smartgun, a hat without the headgear, a flamethrower (w/ flame trail), a newborn alien, and a clear display stand. It might have been nice to get a hairpiece without the hat, since Drake loses the hat at the same time as the harness, but he has enough extras that I don’t feel gipped.

We’ve gotten a number of Battle-Damaged Aliens over the course of this line. What makes this one different? He’s Extra-Damaged! No, but really, there are different blood splatters. Seriously, you guys probably don’t get how big a deal that is, but I’ve got like four of these already, all with the same damage. Some variety is much appreciated. Other than the slight change in blood splatters, this figure’s the same as the one included with Vasquez. The Extra-Damaged Alien includes another egg, open this time, and a clear display stand.

THE ME HALF OF THE EQUATION

On Alien Day, NECA released a re-deco of their Aliens Ripley figure through Toys R Us. I was busy during the day, but my Dad was nice enough to stop by a TRU during his lunch. He didn’t find the Ripley figure, but he did find these three sets. They’re not a bad consolation prize. Sure, there’s not a whole lot of newness to them, but each set has at least something exciting, especially for an Aliens geek like me!

#0921: Lobo & Ambush Bug

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

LOBO & AMBUSH BUG

DC MINIMATES

Lobo&Ambushbug1

So, let’s talk DC Minimates.  Two weeks ago, I discussed Play Along’s use of legal loopholes to get out the first DC-based Minimates in the C3 Construction line.  That line unfortunately ended fairly abruptly, leaving a very incomplete collection of characters.  A few years down the road, DC Direct teamed up with Diamond Select Toys, creating an official line of DC Minimates, which offered a more diverse selection of characters.  Sadly, it too was short-lived, lasting only eight series before ending, once again leaving certain groups incomplete.  The diverse selection of characters ended up as both a blessing and a curse; off the wall characters were fun while the line was running, but after the fact the likes of Lobo and Ambush Bug, who I’m reviewing today, seem like wasted slots in a line that didn’t get us important members of the Justice League.

THE FIGURES THEMSELVES

Lobo and Ambush Bug were released in the seventh series of DC Minimates.  They seem like something of an odd pairing, since I don’t believe the two of them have ever interacted.  Of course, they’re both weird, occasionally fourth wall breaking characters with a tendency to parody popular comics conventions of the time.  So, maybe they aren’t such a bad pairing.

LOBO

Lobo&Ambushbug3Lobo is, by and large, a parody of grungy 90s anti-heroes.  So, of course, he had a large fan base who missed the parody bit and took him as a straight character.  I’ve never been much for Lobo, but I did have a soft spot for his teen-spin-off Slobo, who appeared in Young Justice.  But, that’s neither here nor there; let’s talk about Lobo.  The figure is a little under 2 ½ inches tall and he has 12 points of articulation (due to his boots removing the ankle joints).  Lobo has 5 add-on pieces for his hair, vest, hook-chain-thing, and boots.  All of these parts were new to Lobo, but several of them have seen re-use since.  The parts are pretty well sculpted, and do a suitable job of bulking Lobo up a little bit.  Also, the chain on the hook is a real chain, which is a nice touch.  In general, Lobo is a good example of how great the sculpted work was on this line.  Lobo’s paintwork is fairly impressive; he’s fairly monochromatic, but there’s a lot of detailing, especially on the face and torso.  Lobo included no accessories.

AMBUSH BUG

Lobo&Ambushbug2Ambush Bug is one of the weirder characters in the DCU.  He doesn’t really belong to any particular realm of the universe, and he’s almost entirely absent from normal DCU stories, tending to reside in stories set firmly in his own corner of things.  But hey, he was played by Henry Winkler once, which is pretty cool.  Ambush Bug is mostly a vanilla ‘mate, with one small exception: the antennae on his forehead, which are glued in place.  They’re a pretty good translation of his weird antennae from the comics, so that’s good.  Other than that, everything’s done with paint.  He’s actually surprisingly detailed; DCD could have easily just done a blank green body with only detailing on the face, but Ambush Bug has small wrinkles (just like the ones he has in the comics) on just about every surface.  That’s really nice to see and keeps him from being too boring for the average fan.  I suppose they could have done him in his casual wear he’s known to wear in the comics, but this is his classic look, so it’s understandable.  Like Lobo, Ambush Bug includes no accessories.

THE ME HALF OF THE EQUATION

As with every figure in the DC Minimates line, I picked these two up from Cosmic Comix on the first day they were available.  I’ll admit that I was split on this set; I love Ambush Bug way more than I should, but Lobo’s not my thing.  At the end of the day, both ‘mates are pretty awesome, for totally divergent reasons.  It might be easy to say that these two are part of the reason the line ended so early, but given that the Marvel line just released Dazzler and Howard the Duck together, it’s hard to say.

#0913: Vision & Hawkeye

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

VISION & HAWKEYE

MARVEL MINIMATES

VisionHawkeyeCW1

Civil War is almost upon us (well, some people have already seen it. Lucky ducks…) and the tie-in product is starting to hit, though not as explosively as in prior years. Still, there’s notably more stuff then we got for Winter Soldier. As with all the recent Marvel Studios films, there are some Minimates based on the movie, and the Toys R Us assortment just started showing up. Today, I’ll be looking at two of my favorite Avengers, Vision and Hawkeye!

THE FIGURES THEMSELVES

Vision and Hawkeye are the Toys R Us-exclusive set from the first series of Civil War Minimates (which are Series 66 of the specialty Marvel Minimates line). It’s actually fairly amusing that their packed together, since Vision and Hawkeye’s very first Minimates (from way back in Series 20) were also packed together.

VISION

VisionHawkeyeCW2With the exception of the face detailing, this Vision is the same as the Series 63 version of the character. That was a pretty nice translation of the film version of Vision, and since his design hasn’t changed between the two movies, the new figure’s pretty accurate to Civil War as well. He gets a new, more detailed face, which has a better likeness of Paul Bettany, and adds some of the detail lines that were absent from the last figure’s face. There’s actually a pretty good rationale for this almost total re-release: Vision was a specialty exclusive in the AoU assortments, meaning he was one of the two Avengers not available to TRU consumers. Now everybody gets a Vision! Vision includes both a clear display stand and a flight stand.

HAWKEYE

VisionHawkeyeCW3Of all the costumes in the first Avengers movie, Hawkeye’s was the one that most disappointed me. Hawkeye’s got one of the coolest costumes in comics, and the movie version sucked a lot of the originality out of it. Apparently, I wasn’t the only one who felt that way, since Hawkeye’s gotten a slightly tweaked design in both subsequent reappearances. In AoU, he added a pretty cool coat to his look, but he still seemed to lack some of his comics counterpart’s flair. Civil War seems dead set on amending that, as it’s given Hawkeye possibly his coolest look yet, taking major cues from his West Coast Avengers/Heroic Age design. This ‘mate replicates that design. He has add-on pieces for his hair, quiver, and holster. All of these parts are re-used pieces (being mostly fairly generic parts), but they certainly fit what we’ve seen of Hawkeye’s look so far. Hawkeye’s paintwork is pretty impressive, with a whole ton of great detail work on his uniform, giving him a lot of dimension. His colors also pop; I think this is my favorite shade of purple that I’ve seen on a movie Hawkeye. The likeness on the face bears a resemblance to Jeremy Renner, but I think the Winter Ops Hawkeye still has the closest resemblance. Hawkeye includes a bow, three arrows, a pistol, and a clear display stand.

THE ME HALF OF THE EQUATION

I came across this set at my local TRU. Shocking, right? For whatever reason, this was the set I was most looking forward to in this series. Vision’s essentially a re-release, but the minor changes go a long way, at least for me, and I prefer this one to the AoU version. The new Hawkeye design is pretty strong, and it translates quite nicely to the ‘mate aesthetic, resulting in what is probably the best MCU version of the character so far. This set might be easy to overlook, but it’s definitely one I’m glad I got.