#3541: Mr Sinister

MR SINISTER

X-MEN (TOY BIZ)

Fun FiQ Fact #0020:  Toy Biz’s original Mr Sinister mold had three different color variations, as they desperately attempted to keep up with the character’s comic design changes.

Remember when I was talking about how I screwed up on my ID-ing of the Mr Sinister figures from Toy Biz?  It was a week ago, so it shouldn’t be too distant in your memories.  Well, there’s the three color variants, and I’ve looked at the original, and the late run repaint, but there’s one more, right in the middle, and I haven’t looked at him.  I don’t like the dangling anticipation, so check it out!  The last one!  Now with beard!

THE FIGURE ITSELF

Mr Sinister was released in the 1993 repaint series of Toy Biz’s X-Men line.  Last week’s Sinister was the way the repaint was shown off on the card back, but was actually released later, while this figure wasn’t pictured at all, yet was still the figure that shipped with the rest of the repaint series.  Like the other two Sinister figures, this one is 5 inches tall and he has 8 points of articulation.  It’s exactly the same sculpt as before.  He’s still stiff, but he still works for the character.  The color differences between this guy and the very first release are exceedingly minimal.  In fact, the two are identical apart from the outlined lips and the presence of the beard.  That’s it.  That’s the whole change-up.  Not even a minor palette swap.  I mean, I guess it could be worse?  It was enough to get me to buy it, so somebody won.  I don’t know who.  I mean, Toy Biz went out of business years ago, and I bought all of my Sinisters second hand, so not them.  Was it me?  Did I win?

THE ME REMAINDER OF THE EQUATION

It’s crazy that I didn’t have this guy on hand to do both repaints in one review last week, right?  Like, what are the odds that I’d find this repaint right after reviewing the other one?  Well, pretty low, because this one has been sitting in the backroom at All Time Toys since I got the other one.  They came in at the same time, and I got so distracted by the more obvious repaint, that I missed that I didn’t have this one.  Look, I try, you guys, but the Sinisters just confuse me.  They’re my Toy Biz blindspot!  Well, now I have all three, so no one can stop me now!

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3536: Mr Sinister

MR SINISTER

X-MEN (TOY BIZ)

Fun FiQ Fact #0015: Creator Chris Claremont intended for Mr Sinister to be dark take on the “Shazam” concept, revealed to be the projection of Nate, a fellow orphan from Scott’s childhood.

Every so often here, my solid knowledge of toy-related things fails me. Okay, maybe not fails, but lapses. And then I say something definitively, and it’s totally not definitive because it’s actually wrong. Me? Wrong? Believe it or not, it happens. What’s even crazier is that in this instance, it’s about Toy Biz Marvel, which is especially in my wheelhouse. In my review of Mr. Sinister, I referred to him as the repaint, noting that the only difference between the two releases was that the “repaint” lacked the goatee of the original. Turns out I was lying like some kind of lying person. The one I reviewed was in fact the original release. This one? Repaint. Maybe not *the* repaint, but certainly *a* repaint.

THE FIGURE ITSELF

Mr Sinister was released in the 1993 Repaint Series of Toy Biz’s X-Men line…maybe. Here’s the thing about this guy: he’s got a somewhat confusing history. The prototype shots for the repaint series showed the figure seen here, but when the assortment hit retail, the Sinister that showed up was the same as the standard, but with his goatee added. About three years later, the figure that matched the prototype randomly started showing up mixed in with KB Toys’ close out stock of earlier assessments. Did they just, like, forget to pack the new one in and send him out later? Who knows? Certainly not me. I just review figures and get things wrong. The figure stands 5 inches tall and has 8 points of articulation. He’s using the same sculpt as the initial release, which, apart from its stiffness, is a pretty good sculpt.  The main change-up to the figure is the cape, which is now a totally red piece.  Beyond that, it’s minor changes, with the neckline becoming a v-neck, and the blue taking on more of an indigo hue than its original release.  His forehead diamond is also a little larger, and, on mine, there’s a red spot on his chin, which looks a little bit like his smaller soul patch look, even if it’s not supposed to.

THE ME HALF OF THE EQUATION

Keeping track of all of the Sinister variations is definitely a bit tricky.  I got the first one, and since then I’ve been trying to get the other two variants, because I’m weird like that.  I was honestly not even expecting to get this one when I did; a collection came into All Time, and I just assumed the Sinister would be the one I already had, since it’s the most common by far.  But it wasn’t and now I’ve got 2 out of 3!  Noice!

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#2155: Mr. Sinister

MISTER SINISTER

MARVEL LEGENDS (HASBRO)

A scientific genius with evil intentions, Nathaniel Essex genetically alters his human form to become the shape-shifting telepath known as Mister Sinister.”

When the X-Men were in need of a new big bad and Apocalypse wasn’t quite ready for the task, we got Mister Sinister!  Okay, yes, that’s quite an over-simplification of the character, but, like so many X-Men characters of his time period, there wasn’t much to over simplify for a good chunk of his time in the spotlight.  He lived and breathed “mysterious”, and we wouldn’t get the origin presented above until a decade after his creation.  Still, he’s been an on-again-off-again major foe of the X-Men, and he’s got a pretty darn striking design, so it’s only fair he get some action figure love every now and again.

THE FIGURE ITSELF

Mister Sinister is figure 6 in the Wendigo Series of Marvel Legends, and is the final figure in the line-up, as this assortment is slightly smaller than the usual.  This figure marks Sinister’s second time as a Legends figure, following his old Toy Biz figure from 2005.  That one was considered pretty top-notch at the time, and held up pretty decently, but even brand-new it was pretty hard to find.  Plus, Hasbro’s got this streak going with updating the more popular figures from the old line, so it just makes sense.  The figure stands 7 inches tall and he has 32 points of articulation.  Sinister is an all-new sculpt, though he appears to be at the very least patterned on the Hyperion body, which is a good move size-wise.  It gives Sinister an imposing stature without making him too large in comparison to the X-Men.  He’s actually a touch shorter than the Toy Biz figure, which feels more appropriate for the character, especially given the fact that the X-Men he’s designed to go with are all a touch larger.  It’s definitely a strong sculpt, and I’m particularly a fan of the head sculpt.  That toothy grin’s just great for Sinister, and is surprisingly a look we’ve not seen before in action figure form.  Additionally, his cape is handled much better than prior versions; it’s neither a mess of free-floating straps, nor a solid chunk of plastic, which is a refreshing change of pace.  The paintwork on Mister Sinister is clean and quite sleek.  I will never not like that metallic blue that Hasbro’s so fond of, and I definitely like the high-gloss finish.  Sinister doesn’t have any accessories for himself, but he does include the right arm of the Wendigo Build-A-Figure.  And, honestly, of all the figures who have come with the dismembered bits of other figures, Sinister’s probably the one who it actually makes a little bit of sense for.

THE ME HALF OF THE EQUATION

So, I’m not actually the biggest fan of Sinister.  I had the old Legends figure for a while, but didn’t actually hold onto him, and wasn’t particularly eager to replace him with a new version.  While this figure was the hot figure in the line-up for a lot of collectors, I was far more excited by yesterday’s Nightcrawler, leaving this guy as a bit of an also-ran for me.  Still, once I actually got ahold of him, I have to say I think he made for a solid figure.  Maybe not quite as good as everyone’s been raving, but I’m a touch biased on that point.

Mister Sinister came from my friends at All Time Toys.  If you’re looking for Marvel Legends, or other toys both old and new, please check out their website and their eBay storefront.

#1625: Mr. Sinister

MR. SINISTER

X-MEN (TOY BIZ)

“Mr. Sinister is a mysterious Evil Mutant mastermind who loves to plot and scheme but prefers to let others do the fighting for him. But if he’s trapped and has to fight…watch out! He’s super strong and super tough…even cannon shells bounce off him! Mr. Sinister’s goal is to make everyone – even Evil Mutants – his slaves! And what scares everyone is the fact that he has the power to make that goal a reality!”

In the mid-80s, after reforming Magneto, killing the Phoenix, and thoroughly humiliating the Hellfire Club, the X-Men were in need of a new big bad.  Enter Mr. Sinister, a character with dubious origins and a dubious plan and a dubious obsession with Scott Summers that wouldn’t be fully explained for quite some time.  Even the bio here doesn’t really say much about him, since his origin wouldn’t actually be given for another three years after this figure’s release.  At this point in time, he still had the potential to be a dark take on the Shazam concept.  Kind of crazy, right?  Well, let’s just get onto the review.

THE FIGURE ITSELF

Mr. Sinister was first released in Series 2 of X-Men.  Despite the packaging showing him clean-shaven, that particular figure was sporting a goatee.  This fresh-faced fellow is from the repaint series, which coincided with Series 3’s release.  The only difference between the two is the facial hair, which isn’t even a sculpted element.  The figure stands 5 inches tall and he has 8 points of articulation.  He’s missing the joint at the neck that most X-Men figures, due to a light-up feature in his eyes, not unlike Series 1’s Cyclops and Storm.  The sculpt is pretty decent, and an early example of Toy Biz finding their footing, after the slightly more rudimentary sculpts in Series 1.  It may look somewhat familiar to my loyal readers, as it served as the inspiration for the smaller-scale Steel Mutants figure.  It’s a good summation of the character, especially as he was depicted in the late ‘80s.  The proportions are well balanced, especially for the era, and he’s got a passable amount of detail work.  Like the smaller figure, the cape is removable.  It still sits a little high, but at the larger scale, it’s not quite as bad.  The paint work on Sinister is passable.  Not amazing or anything, but it’s about par for the rest of the line.  There’s some slight slop, especially on the belt, but I’ve seen worse.  Mr. Sinister included no accessories, instead just relying on the previously mentioned light-up feature to add extra value.

THE ME HALF OF THE EQUATION

Mr. Sinister is a somewhat recent addition to my collection, in my current drive to get a complete set of ‘90s X-Men figures.  I picked him up last fall from House of Fun, fished out of their rather extensive selection of loose figures.  Mr. Sinister is actually a lot better than I’d been expecting.  The character’s never done a whole lot for me, but his design really suits an action figure.

#0756: Cyclops & Mr. Sinister

CYCLOPS VS MR. SINISTER

X-MEN: STEEL MUTANTS

SinisterCyclops1

Last month, I took a look at one of Toy Biz’s many experiments with the Marvel license from the 90s, ­X-Men: Steel Mutants. They were a line of small scale versions of the X-Men, which featured a heavy dose of die-cast metal parts, hence the “Steel” part of the name. Toy Biz actually offered a pretty good selection of the X-Men in this line, including not one, but two versions of founding member Cyclops. Today, we’ll be looking at one of those, along with his pack-mate Mr. Sinister.

THE FIGURES THEMSELVES

Cyclops and Mr. Sinister were released in the second series of X-Men: Steel Mutants. Like all the others in the line, they work both as comic and cartoon versions of the characters.

CYCLOPS

SinisterCyclops2This is the second of the two Cyclopses released in this line. While Wolverine got three totally different looks for his three figures, Cyclops just gets a new pose. As opposed to the straight standing look, this one’s got a bit of a running start sort of a thing going. I guess that’s new and exciting. The figure stands roughly 2 ½ inches tall and has 4 points of articulation. Cyclops’s head and arms are plastic, and the torso and legs are metal, like all the other figures in the line. He uses the same head, torso, and left arm as the first Cyclops, along with a new right arm and legs, showing off that deep lunging thing he’s got going on. His sculpt, like that of the first Cyclops, is really a scaling down of the 5 inch Cyclops II figure. That was Toy Biz’s standard Cyclops, and it was a pretty good summation of the character, so it works. The torso’s a bit on the large side for Scott, but hey, it was the 90s, everybody was juicing. All in all, the figure’s pretty well detailed, and not terrible on the proportions, for the time at least. Cyclops’s deep stance makes him a little bit more difficult to keep standing than, say, Gambit, but not as much as you might think. Toy Biz clearly put a lot of effort into making sure these guys were properly balanced, which is good on their part. Cyclops’s paint work is decent for the scale, though there’s some noticeable slop on the changes from yellow to blue, which is slightly annoying. But, smaller details, such as the “X”s on his belt and chest harness are surprisingly clean, and the figure as a whole looks pretty good when viewed from a far.

MR. SINISTER

SinisterCyclops3Mr. Sinister is a pretty natural choice for this line, given his prominence in the cartoon, and he certainly makes sense packed with Cyclops, since they interacted a lot in both the comics and the cartoon. And, unlike Cyclops, this figure doesn’t feel redundant to anyone who had the first series of the line. Sinister was a new sculpt for the Steel Mutants line, though he was more or less just a scaled down version of the 5 inch Sinister from the main line, with the articulation scheme changed. Like that figure, this one feels a little on the small side for Sinister, who was usually depicted as being at least a little bigger than the average person. Aside from that, though, he does a pretty good job of capturing the character’s design. The cape is a separate, removable piece, made from plastic. It clips around the figure’s neck, and doesn’t quite sit right, but it’s close enough not to look too off at this scale. As far as paint goes, Sinister’s mostly painted in the same shade of dark blue, which seems to be a little thickly applied. The rest of the paint is pretty good, though he’s totally lacking Sinister’s usual facial hair. The prototype shows him sporting a full goatee, which is still not correct. Maybe the factory could only do goatee or clean shaven, with no in between? I suppose this would be the preferable choice in that case. There was actually a later single release of this figure that had the goatee, but never one with the character’s actual beard.

THE ME HALF OF THE EQUATION

Cyclops and Sinister were purchased for me by Super Awesome Girlfriend, when we visited Yesterday’s Fun this past summer. She recognized them as being from the same line as Gambit and Bishop and insisted on buying them for me. I actually had the later single releases of both of these figures, though I can’t say I know where they ended up. All in all, these are another fun little addition, and I’m happy to have them!