#0506: Han Solo – Bespin

HAN SOLO – BESPIN

POWER OF THE FORCE II

HanBespin1

Hey! Do you like reading about Han Solo figures? I sure hope you do, cuz I’m reviewing another one today. Yes, after the barrel of laughs I had writing yesterday’s review, I thought, why not another one? So, I’ll be wrapping up this little subset of Power of the Force II reviews with another Han Solo. Yay!

THE FIGURE ITSELF

HanBespin2This particular Han found himself released in the second year of Kenner’s Power of the Force II line. After doing the primary looks of most of the main characters from A New Hope (as well as one or two figures from the other two movies), the second year turned to the later looks of the primary characters, just to make sure the line didn’t run out of Hans and Lukes. So, Han is based on his primary look from Empire Strikes Back, commonly referred to as his Bespin look, as it’s what he’s wearing during all of those scenes. It’s definitely a fan-favorite look, and I’d say its popularity rivals the ANH look. The figure is about 3 ¾ inches tall and he has 6 points of articulation. The figure’s sculpt is mostly new, with the exception of the head, which is re-used from the previous Han figure. That was definitely the best sculpted piece on the last figure, but it’s still saddled with its own set of issues, chief among them being it just doesn’t really look like Han Solo. That said, it’s on an entirely new body here, and that does the sculpt a few favors, chief amongst them being that the head is just a heck of a lot more proportional with the new body. Kenner kind of caught on to some of the complaints about the first assortment of POTF II figures’ proportions, so later assortments ended up at least a tad less ridiculous. Han is still a little bulky, but it’s more evenly spread this time. He lacks the laughable hour glass figure of the previous Han, and his arms don’t look like they’re about to bust the seams of his sleeves either. Those are both pretty big improvements. The figure’s clothes also have a fair bit more texture this time around, especially the shirt and coat, which helps make the figure at least a little more interesting looking. Sadly, he still has some oddly posed legs, but at least they look more like a deep step this time than the freaking side lunge that smuggler Han was doing. The paintwork on Han is overall pretty clean and well handled, and it seems to be better that the other Han. However, there’s a paint chip on his neck, which is rather annoying. Also, the most glaring issue with that paint is that they flat out got the color of his coat wrong. In the movie it’s very definitely blue. Here, it’s black for some reason. I wonder why that happened. Han includes his trademark (and still way oversized) blaster pistol, as a large gun, which I am once again pretty certain he never actually carries in the movies.

THE ME HALF OF THE EQUATION

Okay, so while I didn’t actually have this figure growing up, I did get to play with one on a fairly regular basis. See, my grandmother wanted my cousin Patrick and me to have some figures to play with when we stayed with her, so she had me pick out a handful of POTF II figures for the two of us. This version of Han was among them. Patrick and I had dug out a small little dirt pit in the back yard, which we used as a stand in for the Sarlac Pit, and one day, it started raining and we had to run back in. We thought we had grabbed all of the figures, but poor Han got left behind. The next time we were both at the house, our grandfather had filled in the pit. Patrick and I dug for a while, but Han was nowhere to be found. It’s always been that figure that got away. While at Farpoint this year, still high from the excitement of getting the other POTF II figures from the charity sale, I found this Han at one of the dealer’s tables. His package had yellowed so much that it looked like the poor guy had been encased in amber, but the figure was just fine. And now I have that Han figure again. Huzzah!

#0505: Han Solo

HAN SOLO

POWER OF THE FORCE II

HanANH1

I’m desperately trying to come up with a good intro here, and literally the only thing going through my head is “Han Solo Cup.” Of which I feel rather ashamed. Yesterday, I remarked that I never had any of the Power of the Force II Stormtroopers. Well, funny thing about that is, on the flip side, the only Han Solo I owned from the line was Stormtrooper disguise Han. And, in what seems to be the story of my adult collecting life in general, I’ve decided to fix that. So, let’s look at a Han Solo figure!

THE FIGURE ITSELF

HanANH2Han was released in the first assortment of POTF II figures, which shouldn’t really surprise anyone. He was Han freaking Solo after all. He’s roughly 3 ¾ inches in height, and he has the line’s standard 6 points of articulation. He’s based on Han’s primary look from A New Hope, which is generally the look most people associate with the character. Han’s sculpt was original to him, and it exhibits a lot of the same style cues present in other POTF II figures. Let’s start off with the basic proportions of the figure: he has an overall body-builder-esque physique, but even by body-builder standards, he’s a bit absurd. His shoulders are really broad, and his arms are practically bursting out of his sleeves. He also has the huge hands and impossibly thin waist that were prevalent in the line. Han, more so than others in the line, feels like a cartoon caricature, not a human being. On top of the proportions, Han’s sculpt is plagued by a few issues. Like a lot of the others in this line, Han’s legs are somewhat strangely posed, requiring that he stand in a deep stance to be even remotely balanced while standing. Also, though his hands may be large, they haven’t been sculpted to really hold anything. This is the worst on his right hand, you know, the one he holds his blaster with, which is sculpted flat, so he can’t actually do so. Finally, there’s the head. Now, to be fair, the head is easily the best part of this figure, especially from a technical standpoint. There’s some really nice detail and texturing. However, it seems like the sculptor was working from pictures of Harrison Ford at the time these figures were made, instead of at the time of the movies. And even then, it’s hard to see a lot of Ford in this sculpt. He looks a bit like the lovechild of Ford and Tommy Lee Jones, which, needless to say, isn’t Han Solo. Han’s paintwork is pretty much typical for the time. It’s certainly not bad, but it’s not anything amazing either. Everything is pretty much where it’s supposed to be, and there aren’t really any issues with bleed over or slop.  Han included his signature blaster pistol, which is hysterically oversized, and a larger blaster rifle, which doesn’t appear to be one he carries in the film.

THE ME HALF OF THE EQUATION

As I mentioned in the intro, this isn’t the Han I had growing up. I think part of what turned me off to Han figures in general was that likeness he had. I just didn’t like that Han looked so much older than he should. But, over time, the old Han figure has started to grow on me. So, Han ended up being one of the POTF II figures that I fished out of the charity sale box at this year’s Farpoint. Like the Stormtrooper, he’s definitely a goofy figure, but I feel a twinge of nostalgia for this guy.

#0504: Stormtrooper

STORMTROOPER

POWER OF THE FORCE II

StormtrooperPOTF2a

When I was younger, I had my fair share of figures from Kenner’s Power of the Force II line. Seeing as it was the only Star Wars line around when I was younger, it was these guys or nothing. So, these guys it was. For whatever reason, however, I never found myself with a basic Stormtrooper figure. In fact, until recently, the only Stormtroopers I had were the vintage ones my Dad gave me. But, now I’m looking to change that (I guess), so here’s a Stormtrooper from POTF II!

THE FIGURE ITSELF

StormtrooperPOTF2bThe Stormtrooper was released in the first 1995 assortment of Power of the Force II figures. He stands roughly 3 ¾ inches tall and he has 6 whole points of articulation. This is usually the point of the review where I’d say that I don’t know which of the three Stormtrooper designs was used for the figure, but in actuality, it’s fairly clear that this figure is an amalgam of those three designs (and Arnold Schwarzenegger). The entirely of the POTF II line was stricken by some serious steroid use, but the Stormtrooper seems to have been hit the hardest. The most apparent problem with this figure’s sculpt is the fact that he clearly has no neck. Previous troopers didn’t actually show the neck, but they at least made the helmet long enough that you could actually believe there might be one under there. Not the case here. This guy’s just got a head and then some shoulders, with nothing in between. The head sits atop a huge barrel chest that goes into a serious hour glass at the waist, which is certainly an impressive feat, I’ll give him that. The figure then has the requisite arms and legs with a 45 degree bend, just so he can look a little extra awkward. The legs in particular are bad, because they make him rather difficult to keep standing. On top of the oddly proportioned body, the armor is forced to either cooperate with these new found proportions or go home. It’s chosen the former, which means that the details are kind of a rough estimate of what they were in the movies. The figure’s paint is the simplest of the simple, with only a few spots or black here and there, to break up all of that white. The paint is rather sloppily applied; I guess it just follows that rough estimate thing that the sculpt was doing. The Stormtrooper includes his standard blaster rifle, which he can only hold in one hand, and a larger rifle, which he can also only hold in one hand.

THE ME HALF OF THE EQUATION

Just like yesterday’s Obi-Wan, the Stormtrooper was fished out of a rather large box of Star Wars figures being sold to benefit the Farpoint charities. I must admit to being rather excited when I pulled this guy out. Sure, he’s goofy as hell, but he really resonates with me, for some odd reason. I mean, how could my collection possibly be complete without a muscle-bound Stormtrooper?

#0503: Obi-Wan Kenobi

OBI-WAN KENOBI

POWER OF THE FORCE II

ObiWanPOTF1

Power of the Force II is really important to me. The line is certainly rather dated by today’s standards, probably even more so than even the vintage line, but it brought the Star Wars brand back to shelves after almost 10 years of absence. And, more importantly, it was the line on the shelves in the mid-1990s, just as a certain toy reviewer was getting into action figures. So, today, let’s have a look at that line’s take on Obi-Wan Kenobi, from back in the days when he’d only been played by one actor!

THE FIGURE ITSELF

ObiWanPOTF2Obi-Wan was released in the first assortment of Power of the Force II figures, which started showing up in 1995-1996. The figure is about 3 ¾ inches in height and he had 6 points of articulation. Oh boy, that waist articulation! Obi-Wan is based on the character’s appearance in A New Hope. Like the rest of the POTF II line, Obi-Wan’s proportions are a little bit whacked. He doesn’t quite have the body builder’s physique that some of the others did, but he’s got some fairly broad shoulders, and man, just look at the size of those hands! Also, his legs have a pretty odd leg posing, which kind of makes him have to stand with a strange stance. For some reason, his outer robes have been done using a removable add-on. The end result is that the figure ends up quite a bit bulkier than he should be. Since the sleeves are still brown to match the outer robe, I honestly can’t think of the practical use for a removable piece. Admittedly, the head is actually a decent sculpt. It has a passing resemblance to Alec Guinness, if perhaps a little squashed. Obi-Wan’s paintwork is decent. Not great, but certainly not bad. There’s a little bit of bleed over in a few of the transition areas. Also, it’s true to the film, but the figure is rather dull, color-wise. You know what makes people want a figure of an old guy? Dull colors. Obi-Wan includes one accessory: his lightsaber. The lightsaber is absurdly long (taller than Obi-Wan), which kinda makes you wonder if old Ben is compensating for something.

THE ME HALF OF THE EQUATION

This marks the second of this figure that I have owned. I got my original around the same time as all the others I have from this line, which is when they were first released. I ended up trading that figure for a Val Kilmer Batman variant (what can I say, I was young and foolish!).  I’ve gone all these years without picking up another one. While I was at Farpoint this year, I fished Obi-Wan, along with a few other POTF II figures out of a box of various Star Wars figures that were being sold to benefit the two Farpoint charities. So, I not only got to replace my original figure, but I also got to feel sorta good about it. That’s pretty cool, I guess.

#0192: Jawas

JAWAS

STAR WARS: POWER OF THE FORCE II

Kenner’s Power of the Force II was a very important to my toy collection. The line first hit in 1995, when I was 3 and just beginning to get into action figures. Needless to say, I ended up with quite the selection of figures from the line. One of my favorite subsets of creatures from the original Star Wars was always the Jawas. For some reason, I just love those little guys! So, today’s review covers POTF II’s release of those.

THE FIGURES THEMSELVES

The Jawas were released as part of the 1996 assortment of POFT II figures. They were released as a pair to make up for their smaller stature. The taller one stands about 3 ¼ inches tall and has 5 points of articulation. The shorter one is about 2 ¾ inches, and has 4 points of articulation. In both cases, I’m counting the neck as a point of articulation, but there isn’t very much motion that can be gotten out of either. The sculpts are both pretty good for the time. The taller one is a little bit more detailed, but that’s not too surprising given the difference in size. However, the smaller one still has some very nice detail work. The paint on the pair is fairly basic, but everything is cleanly applied, with no noticeable slop on either figure. Both figures also have a light-piping feature, which allows their eyes to light up. It’s a bit obvious where the clear plastic is on the heads, so I could see some people being annoyed by this. I’m not really bugged by it, but I chalk that up to nostalgia.

THE ME HALF OF THE EQUATION

I don’t remember exactly when or where I got this pair, but I know it wasn’t too long after I got Dagobah Luke. If I recall correctly, they were bought for me by my Mom, while we were out on an excursion together. I always really liked these figures, and I do seem to recall the taller one getting a spare lightsaber, and thereby being a Jedi-Jawa!

 

Incidentally, my brother Christian had a quick comment about these figures while I was reviewing them:

“This figure likes to go MARTINI too many damn times. I don’t see why they made this figure. It’s a piece of SHIET! Why do I need to feel bad about my life when I already have the war to care about?”

Yeah, he’s a bit on the strange side…

#0161: Luke Skywalker – Dagobah

LUKE SKYWALKER – DAGOBAH

STAR WARS: POWER OF THE FORCE II

So, today’s review is actually pretty nifty. I’ve looked at the most recent round of Star Wars toys with The Black Series, and I’ve also taken a look at one of the vintage figures from the original line, but I’ve never really looked at any of the figures released in between.

Star Wars is looked at as one of the permanent fixtures of the action figure aisle nowadays, but that wasn’t always the case. Following Return of the Jedi, the line shifted to Power of the Force for a little while, but that line only ran until 1985, at which point Star Wars toys effectively ended. Ten years later, Kenner relaunched the line under the branding Power of the Force II. In 1995, I was 3 and just getting into action figures. So, POTF II came at just the perfect time and provided me with my very first Star Wars figure, which I’ll be looking at in this review.

THE FIGURE ITSELF

Luke was released as part of the 1996 assortment of Power of The Force II. He’s based on Luke’s look while he’s training on Dagobah in Empire Strikes Back. The figure stands about 3 ¾ inches tall, and features 6 points of articulation. That waist articulation was revolutionary, let me tell you. The sculpts for POTF II, in general, have not aged well. For some reason, everybody got really buff. Luke follows that trend, and looks more like Arnold Schwarzenegger than Mark Hamill. From a purely aesthetic stand point, it’s actually not a bad sculpt. There’s some nice texture on his clothing, and the proportions are about right, even if they don’t belong to Mark Hamill. One negative point: the feet are sculpted at a bit of an angle, which can make getting him to stand up a chore. The paint is actually very good for the time. There’s no bleed over or slop and the smaller details are all clean and sharp, and the shading on the shirt to show it’s wet and stained gives the figure a nice level of depth rarely seen on figures of this era. Luke was packed with a lightsaber and a blaster.

THE ME HALF OF THE EQUATION

The trip on which I acquired this figure is actually one of my earlier memories of going to the store and buying something. I don’t remember what store it was (for some reason my gut says Target, but that doesn’t seem right). What I very vividly remember was being walked over to the toy aisle by my parents, seeing the display of figures and running to them. I saw Luke hanging there and immediately grabbed him. In particular, I remember my mind being completely blown by the idea that he actually included a lightsaber. I guess I just assumed that would have to be a separate purchase. I had yet to pick up on how action figures worked, I guess. Regardless, I was thrilled to have this figure. As the years have gone by, the figure has started to show its age, but I still feel pretty damned nostalgic for him. All in all, he’s not a bad figure, and the sentimental value pushes him up to 11.