Tag Archives: Star Wars

#2662: Scout Trooper & Speeder Bike

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

SCOUT TROOPER & THE CHILD (w/ SPEEDER BIKE)

STAR WARS: THE BLACK SERIES (HASBRO)

“Scout troopers were lightly armored compared with other Stormtroopers, which allowed them to move more quickly and easily in a range of environments. They were also trained for more independence and adaptability than most Imperial troops. The Empire used scout troopers for a range of missions, including reconnaissance and infiltration.”

Back in August of 2014, The Black Series dipped its toes into the water of vehicles for a larger scale toyline with the first release of the deluxe Biker Scout and Speeder Bike set.  While it certainly wasn’t a failure, it also wasn’t quite the smash success Hasbro had been hoping for on vehicles for the line, so it did mean a bit of stagnation on that front.  However, as the line has really grown into its own, the prospect of vehicles, especially on the smaller side isn’t quite as crazy, especially when those vehicles get a reappearance on The Mandalorian.  The Scout Troopers and their associated rides first showed back up in the first season finale, and much like the Stormtroopers, they were part of the remnant set-up, with appearances slightly worse for wear.  Since it’s been a little bit since the Speeder Bike set came out, Hasbro opted to refresh it with a Mandalorian-themed re-deco, which I’ll be looking at today.

THE TOYS THEMSELVES

This set is an Amazon-exclusive Star Wars: The Black Series offering, which went up for order in the fall, and shipped out just before the end of last year.  It’s clearly based around the last episode of the first season, given the specific accessories included with the set-up.

The core Scout Trooper has been included with all three Black Series releases of the vehicle, as well as getting two stand-alone uses of just the figure mold as well.  The figure stands 6 inches tall and he has 31 points of articulation.  Structurally, he’s the same mold as all of the previous Black Series Scout Troopers.  That’s hardly an issue for me, because it was a standout sculpt from early in the line, and it’s aged far better than most of its contemporaries.  It looks perfectly at home with the more recent releases, and the only slight drawback is the range of motion on some of the joints.  Even so, he’s able to get onto the bike with no troubles, which is clearly the most important thing.  The main change-up to the figure is, of course, the paint.  It’s nothing super major, just a generally dirtier appearance on the figure, signifying the “remnant” nature of this guy.  It’s not a bad look overall, but also not so drastically different that he looks super out of place with the prior release.  Like the original release, this guy includes his very small blaster pistol, and also adds in the target that the two scouts use for practice at the beginning of the episode, as well as the messenger bag carrying Grogu.  Technically, Grogu’s listed as his own figure, and even has a point of movement on his neck, but he’s still more accessory than anything else.

The Speeder Bike mold was on its second use for 2020 here, following a re-issue in the Heroes of Endor set.  It’s the same one that was used back in 2014, of course, which is fine by me.  It’s 10 inches long and abut 2 1/2 inches tall at its tallest.  It’s got the same moving flaps on the back as before, as well as the rotating canon on the underside.  The paint gets a more drastic overhaul here, since the bikes in the show are white, rather than the traditional brown.  It’s a different look to be sure, and they do a nice job of handling the dirt and scoring on the edges of it, matching up pretty well with the show appearance.  Instead of the old three tiered stand, this time the bike gets the new hovering base, as seen on the Cosmic Ghost Rider.  While it’s got a bit cleaner aesthetic appearance, I don’t find the functionality to work quite as well.

THE ME HALF OF THE EQUATION

I already had the prior release, and was very happy with it, so I didn’t *need* this one…but it’s a Biker Scout, and I really like Biker Scouts.  Plus, there was enough difference for me to justify it to myself, anyway.  So, I placed the pre-order when Amazon put them up, and then he just arrived.  Honestly, it was pretty low investment for me, I mean, apart from paying for it, I guess.  It’s a cool set, and adds enough value to what was already there to make it worthwhile in my mind.

#2661: Armorer

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ARMORER

STAR WARS: THE BLACK SERIES (HASBRO)

“The Armorer plays a vital role in keeping the culture of the Mandalorians alive. She forges beskar armor in the ancient tradition of her people.”

The Mandalorian has focused not just on the titular Mandalorian, but on a good chunk of Mandalorian culture as well, giving us a variety of different members of said culture.  Within the first season, we meet several members of the Mando’s own tribe, each with their own variants on the Mandalorian armor.  And someone’s got to make all that cool armor, don’t they?  Who could that possibly be?  Why it would be the Mandalorian Armorer, of course!  Introduced in the very first episode of the show, she’s also got one of the coolest Mando designs, which pretty much just begs for proper toy treatment.  And, as luck would have it, toy treatment’s what she got.

THE FIGURE ITSELF

The Armorer is part of the second Phase IV assortment of Star Wars: The Black Series.  She’s another piece of the Mandalorian sub-set, where she’s figure #4.  This is our second figure of the Armorer in the line, following a slightly more deluxe release earlier last year as one of Hasbro’s shifted con-exclusives.  The core figure is mostly the same between the two releases, with only the small cape piece on her back changing.  It pretty much follows the trend of prior Black Series con-exclusives getting slightly stripped down re-releases in the main line fairly quickly after their initial release, though this is notable the only one with a notable change on the actual core figure.  The figure stands 5 3/4 inches tall and she has 29 points of articualtion.  She’s following what is essentially the new standard for articulation, meaning she’s got newer joints such as the butterfly joints on the shoulders, and she’s got increased range of motion on most of her joints as well, making her a rather agile figure.  The sculpt does quite a nice job of recreating her armor design from the show.  The helmet in particular is pretty spot on, which is good to see given that Din’s helmet continues to be ever so slightly off in this line.  The rest of the armor is well-shaped, and cleanly detailed, and there’s plenty of texture work going into the rest of her clothing.  The one truly new piece to this release is the cape, which was a soft-goods piece on the con release, but is plastic here.  It looks perfectly fine this way, and matches with other such pieces on more recent figures.  The only downside is that it does have a tendency to pop out of place rather frequently.  Her paint work is all quite nicely applied.  The base colors are clean and sharp, with little slop or bleed over to speak of.  She actually gets some accenting as well, with some slight dry brushing on the helmet, as well as a wash on the cape and her skirt.  It really helps to bring out the sculpted details, and it’s always nice to see a little extra detailing going into these figures.  For this more basic release, the Armorer gets her hammer and tongs.  It’s not as much as the prior release, of course, but it’s really all that I would deem essential for the character, and two accessories seems to be where Hasbro has settled into for a standard release.

THE ME HALF OF THE EQUATION

Much like yesterday’s Incinerator, the Armorer is one of those designs I’ve wanted as a toy since she showed up on screen.  I was not alone in this, as she was definitely one of Super Awesome Wife’s favorite parts of the show, and S.A.W. was eager about any news of figures.  So, when it came time for the deluxe release, I of course got one for her, and patiently awaited the standard release for myself, since I knew full well it was coming, even before there was an official announcement.  Regardless of version, she’s a really awesome figure of a really awesome design, and she makes for a truly great toy.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2660: Incinerator Stormtrooper

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

INCINERATOR STORMTROOPER

STAR WARS: THE BLACK SERIES (HASBRO)

“Incinerator Stormtrooper armor was exceptionally heat-resistant and bore red markings, similar to the shock troopers, in order to indicate their specialty.”

You can’t have a decent selection of Stormtroopers if you don’t let them specialize, now can you?  It’s an important part of infrastructure, you guys.  I assure you.  Don’t underestimate the infrastructure!  Flame based troops aren’t a new concept in the Star Wars universe, with Scorch existing in the Clone Wars era, and even the First Order getting in on things with their own brand of Flametroopers.  Once a video game-specific EU entry from The Force Unleashed, the Imperial’s own Incinerator Troopers were introduced into the more official side of things in the first season finale for The Mandalorian.  This newly canonized take on the concept has subsequently made it’s way into the toy world as well, including some Black Series coverage, which I’ll be taking a look at today!

THE FIGURE ITSELF

The Incinerator Stormtrooper is part of the second assortment of the re-launched Star Wars: The Black Series.  He’s figure #3 in the Mandalorian sub-line of figures, and one of the two Mando-specific figures in this particular round.  He’s our second show-based army builder, but he shan’t be our last.  The figure stands 6 inches tall and has 29 points of articulation.  Structurally, the core of this guy is shared with the upgraded standard Stormtrooper from the last series, which is sensible, seeing as he’s a Stormtrooper variant.  It helps that it’s also just a rather nice sculpt, so that’s going for it.  He gets an all-new overlay piece, featuring his pauldron, his webgear, and his actual flamethrower device.  This piece isn’t removable from the figure, and it’s all one part.  If I’m honest, it’s my main complaint, because there’s also no storage for the actual flamethrower, leaving him with no real way to set the thing down.  It might as well be molded into his right hand grip at that point.  That being said, I don’t know that I’d really do anything else with it, so him being forced to hold his weapon isn’t the worst thing in the world.  I’d just like to have the option, that’s all.  Making the backpack removable would have also been some good future planning, since I’m sure they’ll be looking to give us a Mortar Stormtrooper at some point as well.  On the plus side, the whole overlay piece is pretty nicely sculpted, and he holds the weapon well in his right hand (it has to sort of rest atop the left, since there’s not a real grip there).  Paint work is pretty key on this guy, since it does a lot of the differentiating.  The red is nice and vibrant, and I like that they’ve manufactured some wear around it’s edges, showing that this armor has been in use.  All in all, the paint does a pretty great job of setting him apart from the standard, and it makes him look rather eye-catching as well.  While the weapon may be mounted to the figure proper, he does still get one extra: a flame effect piece for the front of the weapon.  It’s a cool piece, and it slides into place quite securely.  Additionally, the back pack gives him enough weight to decently counter balance, which is certainly cool.

THE ME HALF OF THE EQUATION

I’ve been hoping to see this figure since this guy turned up in the show.  I wasn’t expecting him to be on an all-new body at the time, but I’m okay with that as well.  He’s a cool looking trooper, and one that I’m glad to have.  I do wish he had more built-in display options, but it’s not like he’s inaccurate to what we saw on screen, and it’s not like he’s a bad figure by even the faintest stretch.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2643: Han Solo – Endor

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

HAN SOLO — ENDOR

STAR WARS: THE BLACK SERIES (HASBRO)

“Han Solo volunteered to lead the mission to destroy teh new Death Star’s shield generator. He and his strike team landed on the forest moon of Endor, where they encountered Scout Troopers and Ewoks.”

While Luke and Leia got drastically re-designed looks for Return of the Jedi, Han wound up with an appearance that was generally pretty re-tread-y of his first movie attire.  It doesn’t make for thrillingly different figures, and that’s probably why when we do get Jedi-inspired Hans, they’re almost always from the Endor segment, which does at least throw a trench coat over his main look, just to mix things up a bit, I suppose.  That’s the look that finally got him in on the RotJ bandwagon for The Black Series, and that’s the figure I’m looking at today.

THE FIGURE ITSELF

Han Solo (Endor) is another piece of the second assortment of the relaunched Star Wars: The Black Series.  He joins the similarly themed Luke and Leia figures from the same set, and is figure #5 in the RotJ sub-set.  Like the last two, he was also available in the “Heroes of Endor” boxed set earlier last year.  The figure stands a little over 6 inches tall and he has 27 points of articulation.  Structurally, a lot of this figure is shared with the Bespin Han figure from 2018.  I was overall pretty fond of that figure and his sculpt, so you’d think the re-use wouldn’t bug me…but it kinda does.  Mostly, it’s because they keep some of the stuff I didn’t like about it, and don’t really fix the handful of issues that were present.  The head proper is very similar to the last piece, but to my eyes it looks like the jaw’s a touch more prominent on this one.  I don’t know if that’s intentional or just mold variation, but it doesn’t really help the issues of the prior figure looking kind of narrow-shouldered for Han.  Nor does the new hair sculpt, which is just generally a bit poofier than the prior piece, again making the head look larger compared to the shoulders.  Additionally, the jacket piece has been swapped for a vest, which doesn’t have the same high-sitting collar as the jacket, which makes the neck look longer and thinner, which just makes the head look larger and thereby makes the shoulders look again smaller by comparison.  He also gets a new set of arms, which wind up looking rather on the scrawny side themselves; given how thin they are, but yet how baggy the sleeves are, Han must really not have any muscle mass to speak of under those sleeves.  The whole thing is topped off with the trench coat, which is a cloth piece to match Luke and Leia’s ponchos.  Trouble is, the coat just exacerbates the issues with the body, honestly, because it’s clearly tailored for a figure *slightly* bigger than this one.  This results in it dragging at his feet and hanging down over his hands, making it look not unlike Han is a small child who has stolen his father’s coat.  It’s not a very imposing or impressive look, and ultimately just adds to his gooniness.  It honestly looks a bit better when placed on the Bespin Han, if I’m honest. Of course, even then, the jacket is also missing the pockets on either side, and the pattern generally seems a bit too dark for what Han wears in the movie, so it’s always a bit of a compromise.  Even Han’s paintwork ends up a little rougher than previous entries, with some rather sloppy application on the shirt and belt, even going down to the strap for the holster.  The face also feels like it has a bit too much color going into it, making it look like Han is a bit flushed.  Han’s only accessory is his usual blaster pistol.  It’s the same piece as the Empire version, but this time with the proper color scheme.  It’s too bad they couldn’t also give him a few of the detonators or something, just to make the package a little more exciting.

THE ME HALF OF THE EQUATION

Han’s Endor look has never been one of my favorites.  Even in the films, after the coolness of the Bespin look, this one seemed like a bit of a step down, at least to me.  It doesn’t help that it always seems to have rotten luck with figures.  This figure is, unfortunately, not an exception, either.  There’s no real smoking gun as to why this figure doesn’t work compared to the other two; it’s just a lot of small stuff that ultimately adds up to a figure that’s just not so great.  It’s a shame, because this one feels like one that could have really shined, but it’s instead the weakest in its respective series.  Oh well.  At least it’s another Han Solo for people to buy.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2642: Princess Leia Organa – Endor

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

PRINCESS LEIA ORGANA — ENDOR

STAR WARS: THE BLACK SERIES (HASBRO)

“Princess Leia Organa rendezvoused with the Rebel fleet and helped organize a plan to destroy the Empire’s new Death Star: they would head to Endor and knock out the space station’s shield generator.”

Princess Leia’s sure gotten a lot of toy coverage courtesy of Hasbro’s The Black Series, so it’s kind of amusing to think there was actually a pretty sizable gap between her earliest releases.  It mostly had to do with Hasbro’s rather poor choice of costume for the line’s first Leia, the somewhat ill-advised Slave Outfit Leia from Series 2 of the line. It wasn’t the greatest figure, and it wasn’t really an essential look, so fans held off, and that in turn scared retailers off of the character for a bit.  Fortunately, things have more or less re-oriented, and we’re more or less getting her at a yearly pace these days.  Leia’s got four prominent looks in Return of the Jedi, which looks like it will be getting most of the 2021 love.  We’ve already gotten her two looks from Jabba’s Palace, so now we’re doing a somewhat linear progression forward, and getting an Endor appearance to match her brother’s figure from yesterday!

THE FIGURE ITSELF

Princess Leia Organa (Endor) is part of the second assortment of the relaunched Black Series.  She’s #3 in the RotJ line-up, and like Luke, she was also available earlier last year as part of the “Heroes of Endor” boxed set.  Leia is likewise in her combat gear from the Endor mission, which actually makes her a more prominent variant for the character than for Luke, since she hangs onto this gear through the film’s climax.  The figure stands a little over 5 inches tall and she’s got 30 points of articulation.  In terms of movement, she more or less has the same movement scheme as the Hoth and Bespin Leias, which is to say she’s got a pretty darn solid movement scheme, which both poses well and hides the articulation decently while doing it.  The sculpt’s an all-new one, and a pretty darn good one at that.  In terms of build and size, it matches with all of the post-40th ANH Leias. The head sculpt is a rather respectable likeness of Carrie Fisher.  I don’t think it’s quite as spot on as the Bespin Leia, which is still my favorite to date, but it’s certainly not a bad one.  And, unlike Luke, there’s actually not too much compromising with the hair in order to let the helmet fit, which is nice to see.  The poncho is cloth, much like Lukes, but actually has a slightly different pattern, like it does in the film.  There’s a fully detailed version of her Rebel command uniform beneath the poncho piece, allowing for this figure to pull double duty as Leia late in the film.  I can definitely appreciate Hasbro’s willingness to not milk us for yet another version of the figure, since that’s tended to be how they’ve handled things in the past.  Ultimately, the scaling of various pieces looks a bit better with the poncho in place, but having the option is still nice. The helmet piece looks to be the same one used for Luke, which is sensible.  It works fine for this figure too, although I do prefer this one without the helmet.  The paint work on Leia is all pretty solid.  There’s the face printing again, of course, as well as a slightly more involved paint scheme under the poncho than we saw with Luke.  Leia’s only real accessory is a blaster pistol, which does feel a touch light.  But, with the sort of double nature of this figure thanks to the helmet and poncho being removable, it doesn’t feel quite as bad as it could have.

THE ME HALF OF THE EQUATION

Hoth Leia is really my default version of the character, but the Endor attire is a pretty close second.  It does add something of a commanding presence to the character, which I can really get behind.  I was hoping for both her and Luke in this style, so getting them both in one fell swoop works out even better than I’d hoped, really.  This figure ends up being the best of the three Endor variants, if I’m honest, and that’s probably for the best, because it’s also the one that feels the most one and done from this set.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2641: Luke Skywalker – Endor

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

LUKE SKYWALKER — ENDOR

STAR WARS: THE BLACK SERIES (HASBRO)

“Utilizing stolen schematics, the Rebel Alliance formulated a plan to destroy the new Death Star. Luke Skywalker joined his friends for this mission to Endor.”

Last year was the 40th anniversary of Empire Strikes Back, which translated to a lot of toy coverage for that particular movie.  Though it’s not an anniversary year, this year looks to be shifting to its follow-up film, Return of the Jedi.  Right out of the gate, we’re getting proper coverage for the film’s versions of the three main characters.  No stranger to Jedi-based figures in The Black Series, Luke has gotten yet another one, which I’m going to be taking a look at today!

THE FIGURE ITSELF

Luke Skywalker (Endor) is part of the second assortment of the relaunched Star Wars: The Black Series, officially slated for an early 2021 release, but it hit some places a little earlier.  Luke is part of the RotJ-sub-set of the line, and is figure #4 in that set.  The same figure was also previously available as part of the “Heroes of Endor” set that Hasbro released as an online “con” exclusive mid last year.  As the name denotes, he’s based on the attire Luke wears during the mission to the forest moon of Endor.  In Luke’s case, it means he’s wearing a poncho and helmet atop his standard Jedi attire from the movie.  The figure stands just shy of 6 inches tall and he has 27 points of articulation.  For the most part, he’s made out of pieces re-used from the first Jedi Luke figure.  From the neck down, he’s the same as that figure, although, like last year’s Jabba’s Palace variant, he’s only got the standard flap attached to the front of the chest, and it’s glued in place.  Like that figure, he also ditches the belt piece from the first figure.  In an effort to fully differentiate the various releases, this one gets a new head, helmet, belt, and a cloth poncho.  The head’s not a bad piece.  It’s our third attempt at a Jedi Luke in this scale, and aside from the hair being a little bit matted down in order to fit the helmet (which is admittedly pretty minor and not too far off of his on-screen appearance), and the face in particular seems pretty good for a Hamill likeness of this era.  The helmet piece is just a touch rounder than it was in the film, but it’s not terribly far off, and the detailing is pretty sharp.  It fits nicely over the head sculpt and stays pretty securely in place.  The poncho piece is a cloth piece, and that’s honestly the best way to handle it.  The tailoring is pretty decent, and the belt helps to keep everything in place and looking pretty good.  The paint work on this guy is largely pretty basic.  It’s just molded plastic for most of the underlying body, but he gets the printing for his face.  It’s slightly misaligned on my figure, but isn’t terribly far off, and honestly looks okay from most angles.  The helmet also gets some extra detail work, with some scarring and weathering in place.  In addition to the removable helmet and poncho, Luke also gets his lightsaber.  It’s a shame didn’t also throw in his standard belt to allow for a full final duel Luke set-up, but the belt for the poncho still works in a pinch.

THE ME HALF OF THE EQUATION

I quite like the Endor Luke set-up, and I’ve been hoping to get him since early on in this line.  I’m actually a little bit surprised that it took quite this long to finally get him, but he’s a nice way of getting another Jedi Luke figure out there.  The Endor parts are all nicely put together, and the underlying figure’s not bad either.  Of course, I’m kind of expecting to see another variant on Jedi Luke sooner than later for…reasons.  Until then, this one will do well for all those people suddenly looking for a Jedi Luke for…reasons.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2640: The Mandalorian w/ Speeder Bike

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

THE MANDALORIAN w/ SPEEDER BIKE

STAR WARS: MISSION FLEET (HASRBO)

Alright, are you guys ready to get cyclical?  I sure hope so, because we’re going to be rounding up this year’s post-Christmas reviews by circling back to where we kicked them off, namely Star Wars, or more specifically, The Mandalorian.  Before the dumpster fire that was last year had really kicked into high gear, Hasbro was looking to experiment a little bit with their Star Wars output.  Obviously, The Black Series and The Vintage Collection have the collector’s side covered, but that leaves a bit of a lack of stuff for a younger audience, or indeed someone who just likes a good, fun toy.  Their first attempt at slight more all ages fare was Galaxy of Adventures, which I covered as they were released in 2019, and which was *supposed* to have more product added in 2020 but…didn’t.  The other line, shown off at Toy Fair last year, was Mission Fleet, a stylized line with a heavier focus on vehicles.  The line started showing up at retail last fall, and it’s been a fun little experiment.  Today, I’m taking a look at its first set based on The Mandalorian.

THE TOYS THEMSELVES

The Mandalorian with Speeder Bike is part of the launch wave of Mission Fleet product, in a set officially dubbed “Battle For The Bounty.”  They have a few different sizes and price points for the sets, and this one is part of the Expedition Class set up, which covers more proper vehicles of the smaller persuasion.

The core figure gives us Mando in his full Beskar armament, and was in fact the first toy from Hasbro to do so, having beaten both the Black Series and Vintage Collection versions to market by a little bit.  The figure stands about 2 1/2 inches tall and he has 9 points of articulation.  Despite the small stature, he does still get a ball-jointed neck and universal joints on the shoulders, so he’s got an alright range of motion.  His sculpt is a pretty respectable little offering.  He’s definitely rather stylized, with a slightly enlarged head, hands, and feet.  He’s not quite as far removed as, say, a PlaySkool offering, but definitely not a hyper realistic recreation of the live action stuff by any stretch.  I think it works pretty well for him, and gets all of the important details for the character, while making him perhaps a touch more kid-friendly.  His paint work is pretty on the basic side, but all of the important details are again present.  Application is clean, and he matches the show depiction pretty well.  Mando is packed with both his cape and jetpack, though, like the Black Series figure, you have to choose one or the other.  He also includes both his rifle and pistol.  The only downside to the two weapons is a lack of storage for them while he’s on the vehicle, an unfortunately recurring issue with the line.

Though not quite as much of a figure proper as the Mando, this set also includes the *other* major player in The Mandalorian, the Child, who was still unnamed at the time of this figure’s release, so he sticks with just being “The Child.”  In an effort to be kind to people who aren’t entirely current on the show, I’ll just stick with that here.  He’s about an inch tall and is articulated only at his neck, which is honestly more articulation than I’d been expecting, really.  He’s definitely way too large to be in proper scale with the Mando or any other normal sized characters from this line, but for proper scaling, he’d be incredibly minuscule, and even more easily lost than he already is.  He’s sculpted holding the control knob from the Razor Crest, and is caricature-ized, much like the Mando.  His paint work’s not quite as clean as Mando’s, but it’s still not too bad.  Again, all of the important details are there.  The Child includes his floating pram from the first few episodes.  Like the Child itself, the pram is quite up-scaled compared to the rest of the line, but it’s a cool piece.  I do wish it was a little easier to get him sitting up in it, though.

The main vehicle component for this set is the speeder bike the Mando uses while on Tatooine in the episodes “The Gunslinger” and “The Marshall.”  It’s a pretty basic speeder bike layout, and it’s certainly a more economical vehicle choice for the character than going the Razor Crest route, so I can dig it.  It’s about 6 inches long, so its scale relative to the Mando is pretty decent.  The detail work is more on the basic side, focusing on the more broad stroke details to sell it.  It works well with the style they’ve gone for with the figure.  There are some slightly obtrusive ports on the sides, two of which are for the included cannon, and the other two don’t seem to match up to anything.  I’m guessing they’re for something in the future, maybe?  There’s also a spot on the back allowing the pram to be hooked up, making this whole thing one larger piece.  Also included with the vehicle is a rather large missile launcher, with included missile.  Obviously, it’s not based on anything from the actual show, but it’s a cool extra, more toyetic thing to throw in, and you can mount it in a few different spots on the bike.

THE ME HALF OF THE EQUATION

I was pretty interested in Mission Fleet when it was shown off at Toy Fair, and when it hit, I enlisted some help from Cheyenne in tracking down a few of the sets.  She obliged on a handful of them, and requested that I maybe, possibly, not buy any for myself, so that she’d have an easier time getting me gifts and the like.  So, I held off, and then I honestly forgot, truth be told, until she presented me with this bad boy just a few days after Christmas.  This is a fun line, and one that I honestly put off actually reviewing for far longer than I should have.  This set in particular is a nice little contained package of all the major Mandalorian elements, but the whole line is just great.  Maybe I should review those other ones I’ve got sitting around at some point, huh?

#2638: Bistan & Shoretrooper Captain

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BISTAN & SHORETROOPER CAPTAIN

STAR WARS: ROGUE ONE (HASBRO)

“Relishing the thrill of action, Bistan fights to ensure the freedom of fellow Iakaru, taking on enemies like Imperial stormtroopers. Specialist stormtroopers stationed at the top secret Imperial military headquarters on Scarif, Shoretroopers patrol the beaches and bunkers of the planetary facility.”

Alright, let’s get ready to jump back in time!  I mean, not a lot, to be honest.  And in fact, it’s not even as much as I frequently jump back, given that over the weekend I jumped back 15 and 35 years respectively.  This time, it’s just a little three year jump, back to the day’s of Rogue One, before Star Wars officially ended for the, what was it, fourth time?  Man, that thing keeps meeting its end, huh?  I actually looked at a fairly large portion of the Rogue One line while it was coming out, but there were a few pieces that I missed.  One in particular was today’s offering, covering one of the Rebel aliens and another variant of one of my favorite Trooper variants, the Shoretroopers.

THE FIGURES THEMSELVES

Bistan and the Shoretrooper Captain were originally slated for release in the third wave of Battle Packs for the Rogue One line, which was to hit retail in early 2017.  Unfortunately, retail support for the line fell-out on the back end, and this pack wound up without a home for its release.  Fortunately, Entertainment Earth picked it up as an exclusive at the end of 2017, alongside the similarly orphaned Fenn Rau.

BISTAN

Bistan is one of the more minor Rebels from Rogue One, only showing up during the run on Scarif at the climax of the film, and not even getting a name or any on-screen dialogue.  He’s most memorable as being seen hanging out of one the U-Wings that arrives with the reinforcements, manning a rather large gun.  He was one of the aliens shown off somewhat prominently in the marketing despite his smaller role, so his inclusion as a toy made a lot of sense.  The figure stands 3 1/2 inches tall and he has 5 points of articulation.  Obviously, we’re going back into the basic line here, so the articulation’s pretty limited by design, but this guy actually does manage to be impressive within that context.  The neck joint has a really nice range on it, and makes for some expressive posing, to some degree at least.  The detailing on the sculpt is pretty top-notch.  There’s a lot going on here, and he replicates the design of the creature from the movie quite nicely, as well as having some impressive detailing on his jumpsuit and gear.  The paint work on Bistan is on the drab side, fitting with the rest of the movie’s cast, really, but the application’s all pretty clean, and he again looks the part of the character from the film.  Bistan is packed with a big ol’ missile launcher thing to mount on his shoulder, with two missiles to shoot as well, and a smaller, more film accurate blaster.  I don’t know that I really missed those launchers, but I had certainly forgotten how prominent they were.

SHORETROOPER CAPTAIN

The Shoretroopers or Scarif Troopers, or whatever the official branding is going with today, were one of my very favorite parts of Rogue One.  The film sports three notable rankings of them, and we got both the standard trooper and the squad commander in both the basic line and Black Series, but the Captain, the rank above those two, got substantially less toy love.  This one here marked its only domestic release.  It’s extra sad for me, because it was honestly my favorite of the three variants.  This figure is a little over 3 3/4 inches tall and has 5 points of articulation.  Structurally, he’s the exact same figure as the basic Shoretrooper, which is sensible, since the two are wearing the same armor.  It was also just a pretty solid sculpt, so a re-use is really an alright thing by me.  The big change-up occurs with the paint, as the Captains have a slightly more involved color scheme than the rank and file guys.  There’s a whole lot more blue on this guy, with far more detailing on the chest and left arm.  It’s a good, eye-catching look, and one that translates well.  Additionally, the application on this figure seems a little sharper than other Rogue One troopers, which I certainly was happy to see.  The Captain is packed with the same E-22 heavy blaster rifle as the other two Shoretroopers.

THE ME HALF OF THE EQUATION

I was pretty closely following the Rogue One line when it was hitting stores, and I was definitely excited for this set, but after it got shelved and then moved, I honestly just lost track of it.  It’s one of those items I kept meaning to track down for myself, but I just never got around to it.  Fortunately for me, I didn’t have to!  This pair was another gift from Cheyenne and her parents, who decided to be far too kind to me this year and give me a nice little handful of gifts.  I’ve wanted this set for a while, and maybe it’s not the most showy or technically impressive pairing, but they’re certainly fun, and I’m just glad to finally have them.

#2632: IG-11

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

IG-11

STAR WARS: THE BLACK SERIES (HASBRO)

“One of a series of dangerous assassin droids largely outlawed in the galaxy, IG-11 is a hired gun programmed to follow Bounty Hunters Guild protocols to the letter.  This distinctive collection features premium deco applications inspired by the end credit images from The Mandalorian, plus a collectible Imperial Credit accessory”

Usually, around the holidays, I’m out of town for the week surrounding Christmas, meaning that, pretty much since I began the site, I’ve been jumping into my Post-Christmas reviews as the new year begins.  2020 was having none of that, so I was still at home this year, allowing me to just turn these reviews right around.  Don’t you guys feel so lucky?  For the first few years I was running the site, I kicked off these sets of reviews with an Alien Queen, but in recent years, that’s shifted to Star Wars, something that will stick this year, as I kick things off with a variant of IG-11!

THE FIGURE ITSELF

IG-11 is part of the “Credit Collection” sub-set of Hasbro’s Star Wars: The Black Series.  These guys hit right around the launch of The Mandalorian‘s second season, and were effectively this year’s equivalent to the Carbonized figures from last year.  Theset was split up as exclusives amongst a few different retailers, with IG-11 being available through GameStop.  Structurally, this figure is the same as last year’s standard IG-11.  That means he too stands about 7 inches tall and has 21 points of articulation.  It also means that he too is based on the IG-88 figure, and is therefore a little bit inaccurate for IG-11.  That said, it’s not like anyone was really expecting a new mold for this release.  He’s designed to be a quick repaint, and that’s exactly what he is.  At least the IG-88 mold is still a pretty fun toy mold.  The differences on this guy come down to two things, the first being the paint.  He, and the rest of the figures in this set, are based on the illustrations seen in the show’s closing credits, which showcase some of the early art for the show.  IG-11 is illustrated in these images with a much warmer, and more colorful palette than is seen in the show, and that’s replicated well here.  I really dig how they’ve captured the sort of graininess of the illustrations, as well as the really divergently bright colors used.  These two definitely won’t get mistaken for each other.  The second change to the figure are the accessories.  He gets the same two blasters as the prior release, but also gains one of the credit pieces that the bio talks about.  It’s a pretty basic piece, and obviously not meant to go with the actual figure, but it’s a cool little extra nevertheless.

THE ME HALF OF THE EQUATION

I’ve got all of the standard color versions of the figures chosen for “The Credit Collection”, so I wasn’t in a rush to pick any of them up, especially given their exclusive status.  I did kind of want the IG-11, because I just really like the IGs.  I wasn’t going to buy it from Gamestop for myself, though.  It’s okay, because I didn’t!  Max and I were discussing the figures when they were shown off, and I said I’d hold off, so he went ahead and ordered an extra IG for me for Christmas.  I’m glad to have this guy.  He’s not my primary version or anything, but he’s a fun alternate deco, and goes well with my other IG-related stuff.

#2631: Grand Admiral Thrawn

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

GRAND ADMIRAL THRAWN

STAR WARS: POWER OF THE FORCE II (KENNER)

“Five years after the Battle of Endor, the Rebel Alliance has driven the evil Empire into a distant corner of the galaxy. But a new danger has arisen: the last of the Emperor’s warlords has devised a battle plan that could destroy the New Republic. A tactical and military genius, Grand Admiral Thrawn rallied the remnants of the Imperial fleet and set in motion a plan to destroy the New Republic. Using Force-inhibiting ysalamiri, he became vitally close to achieving his evil plans.”

Last week, I was discussing EU characters who really ran away from their expanded universe origins and became lasting pieces of the franchise in their own right.  While last week’s focus, Mara Jade, was prominent, she never made the jump to official canon proper.  Today’s subject, Grand Admiral Thrawn, actually did.  First introduced by author Timothy Zahn in 1991’s Heir to the Empire, Thrawn has also been confirmed to exist in the post-Disney-acquisition world of the franchise, having served as the primary antagonist for the second half of their Rebels series.  And, perhaps his future in the franchise is unexplored, if The Mandalorian‘s quick reference is anything to go by.  Well, in the mean time, let’s look at a little bit of toy coverage!

THE FIGURE ITSELF

Grand Admiral Thrawn was released in the Expanded Universe sub-line of Power of the Force in 1998.  Like many of the characters included, this was his first figure, though thanks to actually becoming proper canon, he’s had a few more of them in recent years.  The figure stands 3 3/4 inches tall and he has 6 points of articulation.  Thrawn is an all-new sculpt, but not exactly an unfamiliar or unique one.  He takes a lot of cues from how Kenner handled other Imperial Officer figures, which makes a bit of sense, from a consistency stand point.  Like Mara Jade, he’s clearly not a direct lift from the comics illustrations of Thrawn, in order to help him look a bit more in line with the rest of Power of the Force.  His head seems a touch large in my eyes, but otherwise it’s not a bad looking sculpt, and is consistent with how Thrawn generally looked.  It’s basic, but appropriately so.  The paint work is also pretty basic and straight forward, but again consistent with the character’s depiction.  It’s definitely a more unique color scheme, so he stands out nicely in a group of Imperials.  Thrawn is packed with a ysalamiri, the weird thing he’s got on his shoulders there, as well as a small blaster pistol, and the fold out diorama.  This time, it’s the bridge of ship, presumably the Katana.  It’s pretty sweet.

THE ME HALF OF THE EQUATION

All of these were rare when released, and Thrawn’s quite a fan favorite, so he was also always pretty rare.  Fortunately, that whole set came through All Time last year, so I was finally able to snag one then.  He’s not the most technically impressive figure or anything, but he’s still pretty nifty, and I’m glad I have one.