Tag Archives: Star Wars

#3869: R2-D2 with Launching Lightsaber

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

R2-D2 with LAUNCHING LIGHTSABER

STAR WARS: POWER OF THE FORCE II (HASBRO)

“Though small and unassuming, the astromech droid R2-D2 has proven to be a pivotal figure throughout the quest for freedom in the galaxy. Whether delivering Princess Leia’s message to Ben Kenobi or accompanying Luke Skywalker in his X-Wing fighter as he delivered the fatal blow to the first Death Star, Artoo’s actions have become legendary within the annals of the Rebel Alliance. But unknown to his compatriots, Artoo already had plenty of time and experience at the center of action. Many decades earlier, he served on board the ship of the young queen from the planet Naboo. Even then, he displayed an unmistakable knack for helping others out of dire circumstances.”

You know, there’s often a lot of contention about the best particular version of a particular character in figure form.  It’s especially true of Star Wars, where all the main characters have dozens of figures at the least.  So, it can be pretty hard to narrow such a thing down.  But that’s best.  What we rarely talk about is worst.  Sure, a lot of that’s subjective, but I’m going to go out on a limb and say that today, I’m taking a look at the *worst* R2-D2 action figure ever made.  Well, let’s get to it.

THE FIGURE ITSELF

R2-D2 with Launching Lightsaber was part of the 1998 “Flashback Photo” assortment of Star Wars: Power of the Force II, officially released after the Hasbro change-over in anticipation of Episode I’s release.  This was R2’s third standard release figure in Power of the Force, and his second in 1998 alone.  In contrast to the other “movie specific” R2s in the line, which were all based on the first movie, this one is specifically a Return of the Jedi R2, based on the scene where he launches Luke’s lightsaber on Jabba’s barge.  The figure stands 3 inches tall and has a whole two points of articulation, which aren’t really useful, what with the permanently extended third leg.  But I’ll get to that.  The sculpt is all new, and it’s…well, it’s something.  Since the whole point of the figure is to launch the lightsaber, the sculpt is sort of worked around the whole launching mechanism.  The third leg is permanently extended, to give him more length to fit the saber, but it has to be extra wide to fit the mechanism, and even still ends up being little longer than it needs to be too.  He’s also still a bit long, and his other legs get stretched to compensate.  It’s all sorts of wonky, and not remotely close to what R2’s supposed to look like.  He’s just…wrong.  The paint work isn’t bad, I suppose.  He’s the second instance of the flat silver on the head dome, which is more accurate, and the weathering isn’t too bad.  R2 is packed with a missile version of Luke’s saber.  Like R2, it’s been notably modified to fit the new set-up, and it’s…well it’s also weird.  It launches alright, though, so I guess there’s that.

THE ME HALF OF THE EQUATION

The thing about getting the whole run of Power of the Force is that it’s the good and the bad.  So, sure, there’s some cool ones, but then there’s this guy.  He’s not great.  The gimmick’s a soft one at best, and it’s not implemented all that well, and the end result is such a mangled take on R2 that it’s just hard to see why.  But, you know, it does at least make him unique.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3865: Clone Captain Rex

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CLONE CAPTAIN REX

STAR WARS: THE BLACK SERIES (HASBRO)

“Rex served the Republic on the front lines during the Clone Wars, taking orders from Anakin Skywalker and Ahsoka Tano first as a captain and later a commander.”

Since The Clone Wars has little cross-over in terms of actors with the live action films it crosses over with, most of its original characters are portrayed through their entire runs by veteran voice actors, rather than the people that might play them in live action.  Some of them have made the jump with the same actor; Katee Sackoff as Bo-Katan is probably the best example.  What’s an interesting quirk of the nature of the Clone Troopers, who make up a solid portion of the show’s cast, is that they’re mostly new characters, but they’re voiced by an actor different than the one who portrayed them in live action.  This means that Captain Rex, easily the most prominent clone in the series, and really the most prominent clone in the wider franchise, spent the first decade and a half of his existence never having once been played by Temuera Morrison, the guy that originated the clones in the first place.  This was finally addressed in 2023, however, when Rex made his live action debut in Ahsoka via some key flashback sequences.  And, hey, Hasbro’s also taken advantage of that appearance to give us another Rex figure!

THE FIGURE ITSELF

Clone Captain Rex is figure 16 in the Ahsoka show subline of Star Wars: The Black Series.  He’s in an assortment that also features the flashback version of Anakin from the same show, and they’re both based on their appearances from the earlier flashbacks, meaning Rex is in his Phase I armor.  Since the first Rex was in his later design, it makes this one a much needed variant.  The figure stands just over 6 inches tall and he has 31 points of articulation.  He’s built on the 2020 Clone Trooper body, rather than using the prior Rex body.  Technically, this does make him more accurate to specifically this armor set, and it’s not too bad a mold.  He gets a new pauldron, and belt with kama, which work about as well as they usually do.  The pauldron seems a bit floaty (I liked the affixed one from the last Rex mold), and the kama is a bit restricting, but those are both rather typical.  One minor but super cool touch is that he’s got a new left hand, which has a trigger finger, meaning he can *finally* hold both blaster pistols properly.  Yay!  His helmet is the standard Phase I style one, with the range finder added on.  Underneath, we get a head that looks to be very similar to the prior Rex, if it’s not actually the same sculpt.  It’s certainly a little sharper, though, and it fits better in the helmet.  His paint work aims for a cleaner look for Rex, which is true to the show, and also fits, this being Rex from earlier in the war.  It’s cleanly applied, and he generally looks pretty good.  Rex is packed with just his two blaster pistols.  It’s again accurate to the show, and I’m glad he can properly hold them, but also that feels really, really light.  I know that the Phase II helmet shouldn’t *technically* go on this body, but it might have been nice to at least get one as an option.

THE ME HALF OF THE EQUATION

Rex’s appearance in Ahsoka was exceedingly exciting for me.  I literally jumped for joy.  And, as soon as I saw that Phase I armor, I was hopeful it might mean getting him in figure form.  It took a little bit longer than I expected, but I think it was worth it.  I like any chance to get another Rex, and I’ve always had a soft spot for the Phase I armor.  The figure winds up being mostly by the numbers, but, as silly as it may sound, that tweaked left hand *really* works for me.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3861: Oola & Salacious Crumb

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

OOLA & SALACIOUS CRUMB

STAR WARS: POWER OF THE FORCE II (KENNER)

The denizens of Jabba’s palace are just expansive a collection of colorful characters as those in the Mos Eisley Cantina, which makes covering them all in figure form just as tricky a feat.  In the case of Kenner’s ’90s Power of the Force, both locales got “playsets” leading to a need to release figures to populate them.  Some of them are easy enough to slot into your standard retail assortment, but some of them, less so.  Oola, Jabba’s first dancer seen in the film, is dressed in an outfit that’s deliberately meant to be provocative, making it an odd fit for a line of toys ostensibly aimed at kids.  This has made her something of a rarity in the toy world, as it requires more unique solutions than are typically afforded to an admittedly minor character.  Thus far, she’s gotten two figures, the first of which I’ll be taking a look at today, alongside that weird laughing lizard guy, Salacious Crumb!

THE FIGURE ITSELF

Oola and Salacious Crumb were part of Kenner’s Power of the Force II, released in 1998 as a fan club-exclusive pairing. This would mark Oola’s first time as a figure, and Salacious’ second time, following a pack-in with the Jabba the Hutt playset in the vintage line. Oola’s the proper figure here, standing just under 3 3/4 inches tall and sporting 6 points of articulation.  She’s pretty standard for the line in terms of motion and build. Her sculpt was all-new and remained unique. Obviously, there’s some similarities between her and fellow Twi’lek dancer Lyn Me, but Oola is notably a lot less pre-posed, and her sculpt is notably a fair bit sharper in its detailing than Lyn Me’s. In particular, there’s quite a lot of attention paid to the mesh netting of her outfit, and also quite a lot of attention paid to the cleavage below it. Yeah, this was definitely for the fan club. There’s a pair of cloth-goods…I guess they’re leg warmers? It’s hard to imagine any portion of this outfit keeping anyone warm, but whatever. They’re nifty enough, though the change from the sculpted outfit to the cloth parts is a little bit jarring.  Not enough to ruin the figure, or anything, but enough to be jarring. The paint work on Oola is pretty solid, honestly. The meshwork is clean, and not too messy or gloppy, and it sells the look well in tandem with the sculpt. Salacious is billed as the second figure, but he’s really more an accessory than anything. He’s a pre-posed figurine, and honestly a bit large for proper scaling, but he at least looks the part. They re-used this same piece for Power of the Jedi, so clearly they liked it.

THE ME HALF OF THE EQUATION

This is a piece you don’t see *quite* as often as others from this line, so it didn’t land in front of me until relatively recently. “Recently” in this case meaning a little over two years ago, but the point still stands. Oola’s an interesting figure, given how rarely she shows up, and this version speaks to my collecting sensibilities. Salacious is more an accessory than anything, but he’s a cool one, and they both look very cool in the Palace display.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3857: Snowtrooper

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SNOWTROOPER with E-WEB HEAVY REPEATER BLASTER

STAR WARS: POWER OF THE FORCE II (KENNER)

After wrapping up the first round of “Deluxe” figures, which were admittedly on the goofier, gimmicky toy side of things, Kenner’s later deluxe offerings on Power of the Force were instead more in line with the usual Star Wars toy approach of being more actually film accurate.  So, rather than heavy hitters with made up big accessories, we got characters who actually needed the larger scale set-up.  We got three figures, all kind of themed around the Hoth scenes from Empire.  I’ve already looked at the Probe Droid and the Rebel Trooper, so here’s the last of the the three with the Imperial Snowtrooper!

THE FIGURE ITSELF

The Snowtrooper with E-Web Heavy Repeater Blaster was added to Kenner’s Star Wars: Power of the Force line in 1997.  He was released the same year as the smaller single-card release Snowtrooper, but this one got a different accessory compliment.  The figure stands a little under 3 3/4 inches tall and he has 5 points of articulation.  The standard Snowtrooper was one of the more restricted figures in the line, and this version only scales that up further.  He’s got more of a squat to him, and he’s really only meant for interacting with his accessory.  The sculpt is at least internally consistent, so he fits right in with the standard release, making him a solid choice in regards to army building and the like.  His paint work is also pretty similar in its set-up, though I think the weathering’s a little bit heavier on this release versus the single.  That was true of the Rebel Trooper as well, so there’s some consistency there.  As with most of the deluxe figures, its the accessory set-up that *really* makes a difference.  As the name of the figure points out, this guy’s main set-up is the E-Web, a recurring Imperial armament, which is pretty cool.  It’s a sizable piece, and scales well with the figure, and it works well with the figure’s pre-posing.

THE ME HALF OF THE EQUATION

Honestly, I remember seeing this figure a lot growing up, but I never had one.  My cousin Patrick did, I know.  He was generally more of a Snowtrooper fan than I was, so it tracks.  This one is more of a “completing the set” purchase than anything.  It’s cool enough and very accurate, but I’d be lying if I said it wasn’t the most “meh” of the Deluxe figures in the line.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3853: Boba Fett – Deluxe

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

BOBA FETT with WING-BLAST ROCKET PACK and OVERHEAD CANNON

STAR WARS: POWER OF THE FORCE II (KENNER)

“As a result of Luke Skywalker’s daring rescue of Han Solo from the clutches of Jabba the Hutt, Boba Fett was thrust into the Great Pit of Carkoon and presumed to be a victim of the dreaded Sarlacc. Sometimes later, the notorious bounty hunter was spotted on Nar Shaddaa with a menacing-looking weapons pack. Several rumors have been spread concerning his recent escape and present situation, the most prevalent one being that the Hutts have contracted him to capture Han Solo and Princess Leia alive for the death of Jabba.

A weapons master, Boba Fett has a veritable arsenal hidden throughout his Mandalorian armor. His new pack is reported to possess powerful turbo thrusters that provide prolonged atmospheric flight up to 500km per hour. Shielded battlewings open to reveal missile racks loaded with concussion rockets, while heavy-rotating blasters, similar to those mounted on Jabba’s sail barge, respond to optically-activated signals in the helmet. Certainly the deadliest feature of this device/vehicle is the bolstered proton torpedo launcher. It is estimated that this pack was designed and built by Boba Fett himself: besides that fact that not one of its kind has ever been seen before, the type and variety of its weaponry – few other than Fett would dare carry a proton torpedo on his back – suggest that this battle machine be a signature model of the galaxy’s most notorious bounty hunter.”

You know, I gotta say, I do love it when Kenner would get real wordy with the bios on the back of their figures.  These days, Star Wars figures are lucky to get maybe two sentences to themselves, but here’s this wacky variant Boba Fett that’s out here getting an entire post-RotJ storyline.  There’s two whole paragraphs!  That’s dope!  Also, it makes my intro easier, because look how many *words* there are.  Anyway, a while back, I looked at three of the four debut “Deluxe” figures from Power of the Force, which marked a rare instance of Kenner pushing their usual “toyetic” approach on Star Wars, but I never rounded out the set.  So, let’s do that now!

THE FIGURE ITSELF

Boba Fett with Wing-Blast Rocketpack and Overhead Cannon (which, yes, is his official name) was part of the first year of Deluxe figures from Kenner’s Star Wars: Power of the Force line in 1996.  The figure stands 3 3/4 inches tall and he has 6 points of articulation.  Like the other three figures from the first year, Boba is effectively a tweaked version of the Series 1 Boba, but now with a big accessory you can strap onto him.  The core figure is sort of a merging of the standard and Shadows Boba molds, but also with a more neutral stance, which also makes him just the slightest bit taller.  Beyond that, it’s more or less the same figure, with more or less the same design elements.  It’s not terrible, but it’s also a little removed from accurate.  His color work follows the Series 1 set-up, putting him in specifically his Return of the Jedi colors, which, given the way the bio goes, makes a degree of sense.  It was also the look being most pushed by the multi-media side at the time, so that also makes him the most evergreen look, I suppose.  His main change-up is the inclusion of the “Wing-Blast Rocketpack and Overhead Cannon,” which replaces his usual, more modest jet-pack.  It’s really big, and it makes him rather unstable, but I guess it’s…like, fun?  Is that allowed?  Are Star Wars figures allowed to be fun?  Eh, I’ll allow it.

THE ME HALF OF THE EQUATION

When I was a kid, I wasn’t much of a Fett guy myself, but my cousin Rusty was.  With that in mind, I bought him one of these for his birthday the year they came out, but, unfortunately, someone else had done the same.  He told me I should open it, and it was his birthday, so I did.  And since I’d opened it and it couldn’t be returned for another gift, I ended up keeping it.  Well, just the core figure.  I never had the backpack.  And, honestly, I didn’t have the core figure for long either, as I lost him somewhere along the way.  The one here in the review is the result of quite a hunt.  See, I found the figure and the backpack with ease, but the launcher and the missile seem to be the one thing that goes missing every time. At one point, I even got my hands on a sealed one, and that one was somehow missing the missile and launcher *in the package.*  As you can see, though, I did eventually find a complete one.  He’s goofy and silly, but he’s neat.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3849: Kabe & Muftak

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

KABE & MUFTAK

STAR WARS: POWER OF THE FORCE (KENNER)

The ’90s run of Power of the Force has a pretty impressive depth to it, making it the first really notable example of getting a bunch of figures based on all the blin-and-you’ll-miss-them aliens that appear in the original trilogy.  Obviously, it was just sort of the tip of the iceberg in terms of what Hasbro would do as the line expanded, but there are still a number of characters who got their first figures under PotF and haven’t yet gotten a follow-up.  Today’s entry, which focuses on two patrons of the Mos Eisley cantina, is kind of in line with that.  So, let’s look at Kabe and Muftak.

THE FIGURES THEMSELVES

Kabe and Muftak were an online-exclusive Star Wars: Power of the Force release, made available on Hasbro’s direct shop in 1998.

Kabe here is the smaller of the two included figures, putting her somewhere in the area of Jawa sizing in terms of scale. She’s technically the more fortunate of the two figures, having gotten a second figure after this one (though that one was really just a minor repaint of this one).  The figure stands 2 1/2 inches tall and she has 4 points of articulation.  Since she’s got that long robe over the legs, she get no movement there, with movement ending at the waist.  It does at least make her a rather stable figure.  Her sculpt is fine.  It’s a little rough, for sure.  A lot of the Power of the Force figures are somewhat dated looking, but still look finalized, but Kabe is…well, she feels a little bit unfinished.  I think it may be partly to do with the available reference material, or rather the lack of it, since she’s not exactly a highly visible character.  But, it’s at leas rather unique, so I guess there’s that.  The vest is a separate piece, so you can remove it for a bit more customizability, and perhaps give it to another smaller creature?  I do rather like her paint work, which adds quite a bit of accenting, and really helps to offset the more unfinished nature of the sculpt.  Kabe is packed with a sci-fi knife thingy.

Muftak is the one-and-done of the set (though the sculpt was re-used in the Saga Collection line for Foul Moudama, from Clone Wars), so there’s more riding on this one?  Also he’s a lot larger.  The figure stands 4 1/2 inches tall and has 6 points of articulation.  He’s very tall, but not very posable.  But, he’s also a bit pre-posed.  So there’s that.  I do like that one elbow swivel he’s got.  He’s sporting an at the time unique sculpt.  It’s actually quite a nice sculpt.  The fur detailing is solid, showing a better flow than most of the Chewbaccas from the line, and his generally unique look is sold rather well.  He’s also just nice and solid-feeling, and stands really well on his own.  Just a lot of wins there.  The paint’s not bad.  There’s same accenting and shading on the fur, which is perhaps a touch heavy in some spots, but overall works quite well.  Muftak is packed with a larger blaster pistol, which he can rather awkwardly hold in his left hand, if you’re so inclined.

THE ME HALF OF THE EQUATION

I’m firmly in the group of people that would probably have no clue these characters even existed were it not for the figures.  And, also the decision to go completist on this line.  The web exclusives can be a bit spotty on ease of access, mostly because so many people ignored them for so long.  They’re not expensive, but they’re rarer to show up.  I snagged these two, loose, from a sizable Star Wars collection traded into All Time a couple of years ago.  Kabe’s nothing much to write home about, but Muftak’s honestly pretty cool.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

Flashback Friday Figure Addendum #0026: Princess Leia Organa as Boushh

Posted by Ethan Wilson in Flashback Friday Figure Addendum and tagged with , , , , , ,

PRINCESS LEIA ORGANA as BOUSHH

STAR WARS: SHADOWS OF THE EMPIRE (KENNER)

For our second Flashback Friday Figure Addendum that’s actually back on a Friday, I’m following up on a thing from last week, and doing another Star Wars follow-up.  Heck, it’s even another Shadows of the Empire follow-up, because that’s how I roll…you know, right now specifically.  Anyway, let’s revisit Leia as Boushh!

“After Han Solo was captured by Boba Fett, several attempts were made on Luke Skywalker’s life which threatened the future of the Rebellion. Princess Leia Organa and Chewbacca sought to protect the young Jedi, and traveled to Coruscant to follow up leads surrounding these attempts. They hoped to draw from the extreme intelligence gathering network of the Black Sun, a criminal organization whose operations extended to the farthest reaches of the galaxy. Because Coruscant is the homeworld of the Empire- a dangerous place for any member of the Rebel Alliance- Leia disguised herself as the renowned Ubesian bounty hunter Boushh. Boushh’s helmet concealed her entire face while a built-in voxscrambler altered her voice to resemble that of an Ubesian; a false I.D. and code taken from Black Sun completed her disguise and provided a safe level of anonymity. Little did she know that Prince Xizor, Underlord of Black Sun, was behind the murder attempts on Skywalker, and had his sights set on Leia as well.”

Long bio there.  How do you follow that, amirite?  Um, so, yeah, today’s another Star Wars review. Yaaaay.  This time around I’m taking a look at another Princess Leia figure, specifically the one from that time she pretended to be a bounty hunter.  Everybody loves bounty hunters!

THE FIGURE ITSELF

Leia in Boushh disguise was released not as part of the main Power of the Force II line, but instead as part of the basic assortment of Star Wars: Shadows of the Empire (she would later see a re-release on a standard PotF2 green card, though).  She has the notoriety of being the only movie-based figure in the line-up.  The figure stands about 3 3/4 inches tall and has 6 points of articulation.  As with the PotF2 Slave Leia figure, this Leia is a bit on the tall side.  This was a recurring issue early into this line; at least they were consistent, right?  Leia sports a unique sculpt. It’s fairly decent for the time, being only slightly pre-posed and generally pretty decently proportioned.  It captures the look from the movie pretty well, and only makes minor stylistic adjustments.  The thermal detonator in her left hand is permanently attached, which removes a little bit of versatility from the figure, but given how integral that piece is to her intro in Jedi, I’m willing to give them a pass.  The head doesn’t exactly look like Carrie Fisher, but it also doesn’t look like a chimpanzee, which puts it ahead of most of the Leias of the time.  The paintwork on Leia is generally pretty solid.  The colors match well enough with what we see on-screen, and the application is all pretty clean.  Leia was packed with a removable helmet and half-cape to complete her Boushh look, as well as the usual staff, which according to the packaging is actually a blaster rifle.  Who knew?  I certainly didn’t.

THE ME HALF OF THE EQUATION

This wasn’t my first Leia (that was the monkey-faced ANH version), but this figure has the distinction of being my go-to Leia for most of my childhood.  I actually don’t 100% recall where this figure came from.  She was probably a gift, likely for my birthday, but that’s really just me making an educated guess.  Nevertheless, this was my favorite Leia for a good long while, and is the strongest of the ’90s Leia figures.  This figure is pretty much single-handedly responsible for my love of Leia as Boushh.

This review was actually my very first Shadows figure, tempered a bit, I suppose, by the fact that she’s one of the two that pulled double duty between Shadows and the main line.  I don’t remember specifically where mine came from, but I do recall that purple card, so I know she was the Shadows release.  This review stuck to brevity, but not in a bad way.  I think I was honestly pretty on point here.  When I reviewed her, she was the antithesis of Luke, who had his weapon and half-cape, but no helmet, in that she had the helmet, but not the other things.  Thankfully, I was able to locate the missing parts in the mean time, so she’s all complete again.  The cape likes to pop out of place a lot, but she’s otherwise still a very nice figure, and remains my favorite Leia of this era.

#3845: Commando Droid

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

COMMANDO DROID

STAR WARS: THE BLACK SERIES (HASBRO)

One of the things Clone Wars did was flesh out the ranks of the two opposing armies a bit more than what we saw in the movies.  Obviously, we got a lot of focus on the individual clones, but the Droids also got some new models not seen elsewhere.  A good number of them were more specialized, but one of the earliest additions to the more standard line-up was the Commando Droid, a more robust take on the standard Battle Droid.  As we finally start to get some more of the droid army in Black Series, we’ve finally made our way to some of those Clone Wars-original designs, meaning we finally get an update to the Commando Droid!

THE FIGURE ITSELF

The Commando Droid is figure 18 in the Clone Wars sub-set of Star Wars: The Black Series‘ 4th Phase.  The Clone Wars line is really one of the slowest growing of the sub-lines; the Commando Droid is only 1 higher than Pre Vizsla, a figure released at the end of 2023.  It also makes the Commando Droid thus far the only Clone Wars-branded figure in the new standard packaging (though there’s already a Savage Opress in the deluxe equivalent).  The figure stands 6 inches tall and he has 32 points of articulation.  The articulation on this guy hits pretty much all of the notes it needs to, and doesn’t leave really any of his sculpted joints as false ones, which is always nice to see.  I was impressed by how the neck and shoulders worked; the ball joints coupled with the hinges make for an impressive range.  The only part I’m not too keen on is the knees, which don’t go quite as deep as I’d like; they pretty much stop at 90 degrees, which is bare minimum, but not great for lunging and stuff.  Thankfully, the hips and ankles have enough movement to offset.  The sculpt is an all-new one, and it’s a very strong one.  The Commando Droids only exist in the Clone Wars style, but this figure manages to capture the spirit of that design, while also making them feel at home with the rest of the more realistically-styled figures.  The detailing is all very sharp, and the articulation works into the sculpt well.  He’s also quite sturdy, which is an improvement to some of the other droid sculpts.  His paint work is more involved than you might expect.  There’s the base color work, of course, which is good and clean, but he’s also got a fair bit of weathering, which makes him seem a little more battle-hardened, which feels right for such a droid.  The Commando Droid is packed with a standard droid blaster and a vibro-blade.  The blaster fits very nicely in his hands, and the blade can be mounted on his back, albeit somewhat awkwardly.

THE ME HALF OF THE EQUATION

I’m a big fan of the Commando Droid, and have almost every version from the Clone Wars line.  That’s one of my very favorite molds from that era, so this one was one I was really looking forward to, but ever so slightly worried might not live up to my expectations, especially after being rather letdown by the Magnaguard.  But, I couldn’t bring myself to pass him up, so I snagged him when he hit.  He’s truly a fantastic figure, and a worthy successor to the old Clone Wars mold.  I’m very glad I didn’t skip this one.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

Flashback Friday Figure Addendum #0025: Luke Skywalker in Imperial Guard Disguise

Posted by Ethan Wilson in Flashback Friday Figure Addendum and tagged with , , , ,

LUKE SKYWALKER in IMPERIAL GUARD DISGUISE

STAR WARS: SHADOWS OF THE EMPIRE (KENNER)

What’s this?  The Flashback Figure Addendums are back on Fridays?  Yes, dear reader, they are.  I moved them to Mondays to tie-in with Marvel, but it was honestly bugging me, because then they’re not “Flashback Fridays” anymore, and it feels like it kind of misses the point.  Additionally, I’m feeling stretched just a bit too thin these days.  And, rather than take a whole hiatus, I’ve decided to give myself a slight breather on Fridays.  So, for the foreseeable future, you’ll be getting four new reviews a week from me, as well as one Flashback Friday Figure Addendum.  For our first Addendum back on a Friday, we’re tying in with yesterday’s Star Wars review, with Luke Skywalker in Imperial Guard Disguise!

“The Empire’s victory in the Battle of Hoth has brought hard times for the Rebel Alliance. Han Solo has been frozen in carbonite by Darth Vader, and two huge bounties have been placed on the head of Luke Skywalker. The Emperor wants him alive, but Prince Xizor , underlord of the most powerful criminal organization in the galaxy, wants him dead. Worse still is that the diabolical Xizor is holding Princess Leia Organa prisoner in his castle on the Imperial Center of Coruscant. this is a tactical maneuver, part of a larger master plan to lure Luke Skywalker into his castle where he can be easily eliminated — the key step in Xizor’s plan to replace Darth Vader at the Emperor’s side. unaware of this danger, the young Jedi and Lando Calrissian sneak into Imperial City hoping to rescue Leia. Simplylaying foot on Coruscant is a dangerous act for these two: high on the Empire’s list of most-wanted outlaws, they could easily be recognized and captured — or assassinated. Disguising themselves as beggars, they “borrow” the armored uniforms from a pair of elite Coruscant stormtroopers. These troopers are some of the Empire’s finest, selected as home guards for the wealthiest and most cultured city in the galaxy. Joining forces with Chewbacca and Dash Rendar, Skywalker and Calrissian attempt to infiltrate Xizor’s nearly impenetrable stronghold and rescue the princess.”

1996’s Shadows of the Empire was important, in that it was the first time the public at large had been introduced to the Star Wars Expanded Universe. It’s also an interesting experiment in marketing, essentially being a movie merchandising campaign that lacked a movie. There were a handful of figures, mixed in with Kenner’s then running Power of the Force II. Newcomers Dash Rendar and Prince Xizor got figures, of course, but there were also new variants of out heroes Luke, Leia, and Chewbacca, all of whom had to take on disguises during this new story. I’ve looked at both Leia and Chewbacca, which just leaves Luke, who I’ll be reviewing today.

THE FIGURE ITSELF

Luke Skywalker in Imperial Guard Disguise was released in the basic figure assortment of Kenner’s Star Wars: Shadows of the Empire line. The figure stands about 3 3/4 inches tall and he has 6 points of articulation. This Luke uses the same head as all of the other early PotF2 Lukes. It’s not the best likeness, but hey, here’s to consistency, right? The rest of the figure is brand new. The packaging dubs his look as “Imperial Guard Disguise,” a name that tends to conjure up the red guards from Return of the Jedi, who look quite a bit different than the look Luke is sporting here. However, the bio fills us in that this armor is actually from one of the elite Stormtroopers on Coruscant, making it a separate look entirely. As with so much of the design work seen in Shadows, the armor is undeniably a product of mid-90s comic book design, meaning it’s a little divorced from the original trilogy designs. His armor’s bulky and ultra padded, and seems to lack that used look we’re so accustomed to. It’s a little hard to reconcile this as a design that would appear in between Empire and Jedi. That being said, it’s hardly a terrible look. In fact, it manages to be rather unique and helps this Luke to stand out a bit from the crowd of other Lukes from over the years. The paint work on this figure is fairly decent, and, like the rest of his design, fairly unique. The red’s a nice shade, and all of the application is pretty clean. He’s packed with a removable helmet and half-cape to help complete his full disguise. Since Luke lost his father’s lightsaber in Empire and didn’t build a new one until the beginning of Jedi, he of course needed a new weapon, so this figure included a taser staff weapon.

THE ME HALF OF THE EQUATION

This figure was, I believe, my first Shadows of the Empire figure. My cousin Noah had saved up to buy the PotF2 Millennium Falcon, and was along for the trip to go buy it. Noah’s mother, who took us on the trip, agreed to get me one figure. Luke was my favorite character, and this figure appealed to my 5-year-old self, so he was the one I picked. I’d say having this guy in my collection already was probably what pushed me to pick up the Bounty Hunter Chewbacca instead of the normal one, and owning these two is certainly not a decision I regret in the slightest.

This is from 2018, when I was pretty deep into my Power of the Force revisit that was brought on by a bunch of figures purchased the year prior.  Luke was, of course, from my original run, so he snuck in there closer to the end.  I was still operating off of the bulk photos I’d shot some time back in early 2016, so he didn’t get updated to get turnarounds.  And, while I had managed to locate both his cape and weapon for the purposes of that review, I had not yet found his helmet, which I found sometime in the last few years and set to the side and promptly forgot about.  But, here it is now!  Beyond those two things, I stand by my review, and I still do love this figure quite a bit.

#3841: Luke Skywalker – Imperial Guard & Princess Leia Organa – Boushh

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

LUKE SKYWALKER — IMPERIAL GUARD & PRINCESS LEIA ORGANA — BOUSHH

STAR WARS: THE BLACK SERIES (HASBRO)

“To gather intel on the Black Sun, Leia disguised herself as an Ubesian bounty hunter. But when Xizor captured her, it was up to Luke — alongside his friends and posing as an Imperial Guard — to rescue her”

Next year, it will have been 30 years since Shadows of the Empire, the multimedia Star Wars “event” set between Empire and Jedi launched.  So, you know, we’re all getting properly nostalgic.  Also, I think the last of the original product might *finally* be starting to dry up.  No, I’m just kidding; that stuff’s never gonna dry up!  Nevertheless, Hasbro’s actually doing some updated versions of a lot of the principal players in their Black Series line, including today’s focus, Luke Skywalker and Princess Leia!

THE FIGURES THEMSELVES

Luke Skywalker — Imperial Guard and Princess Leia Organa — Boushh are a Hasbro Pulse-exclusive Star Wars: The Black Series two-pack.  They hit more or less in tandem with the main line’s Prince Xizor figure, launching this little Shadows of the Empire sub-line.

LUKE SKYWALKER — IMPERIAL GUARD

While for much of the Shadows story, Luke is just wearing slight variations on his looks from the two surrounding films, the look that gets the most play in tie-ins is his Imperial Guard look, when he and Lando steel the armor from the elite Stormtroopers on Coruscant.  It’s notably the look for his vintage Kenner figure, giving it some distinctive play.  The figure stands about 6 inches tall and has 29 points of articulation.  He appears, near as I can tell, to be an all-new sculpt.  That’s not terribly surprising, since it’s a rather unique design.  That being said, this figure does a bit to bring said design just a touch more in line with the general Star Wars vibe, playing up the similarities to the clone armor just a bit.  It’s a solid translation of the design, with a lot of well-rendered textures and layering, making it a very visually interesting design.  As with the original figure, the helmet is removable (though, unlike the earlier figure, the cape is not), and we get a fair run of the mill modern Luke underneath.  The whole thing goes together pretty well, and it’s an impressive piece of work from top to bottom.  The color work is a little brighter than I’m used to, going by the Kenner figure and all, but at the same time, it’s not bad.  The red matches closer to the Black Series Royal Guards, which makes its own degree of internal sense.  He’s packed with the aforementioned removable helmet, as well as his taser staff weapon thing.

PRINCESS LEIA ORGANA — BOUSHH

Within the context of the story, Shadows serves to introduce the Boushh disguise that Leia uses to infiltrate Jabba’s palace in Return of the Jedi, which also serves as a great way for the Shadows tie-ins to double-dip on Boushh disguise Leia molds.  Despite there being other looks for Leia in-story, this figure is hear to offset the cost of new tooling on Luke, hence the re-used look.  The figure stands about 5 1/2 inches tall and she has 27 points of articulation.  From the neck down, she’s identical to the very first Black Series Boushh Leia, and, by extension, it’s Archive re-issue.  It’s a good sculpt, and apart from some slightly older style articulation, there’s not much you can do to improve it.  The one change-up is the head, which goes from being a solid cast piece to being the head/hair two-piece assembly that’s become standard for the line.  I always felt that the Boushh head sculpt was one of the better likenesses for Leia, but the styling was a little outdated, so I get the need for update.  Ultimately, this one’s more technically advanced, but I think it looks less like Carrie Fisher, so it’s a bit of toss-up in terms of which one’s actually better.  The paint work is again very similar to the last release, with only the head really changing things up, again to bring things more up to modern standards.  Like her prior release, Leia is packed with her helmet, staff, and thermal detonator.

THE ME HALF OF THE EQUATION

I’m slowing down on Black Series these days, and I don’t *need* to get all of the Shadows figures, what with having the originals and all, but at the same time, I’m a sucker for that Luke design.  When these were shown off, I was certainly interested, and Max was thankfully nice enough to hook me up with a set, since he was ordering one for himself.  Now that they’re here, they’re certainly…well, they’re certainly the smaller figures, but bigger, I guess.  Both of them are nice, for sure, and Luke’s a particularly impressive piece himself.  But, as with so much Black Series these days, I don’t know that my own personal excitement is there much.