Tag Archives: Star Wars

#3758: Commander Gree

Posted by Ethan Wilson in Reviews and tagged with , , , ,

COMMANDER GREE

STAR WARS: REVENGE OF THE SITH (HASBRO)

“On the planet of Kashyyyk, Commander Gree serves Jedi Master Yoda and helps the Wookiees fight the invading Separatists. When the secret Order 66 is issued, Commander Gree suddenly turns on the Jedi, but Yoda senses his betrayal and quickly eliminates him.”

I am nothing if not willing to go through with the bit.  The bit in this case, of course, is doing a weekly Star Wars review based on one of the prequel movie tie-in lines, in order.  I did Phantom Menace and Attack of the Clones, so now it’s time to jump to Revenge of the Sith.  While I have nostalgic attachment to all of the prequels, and am willing to discuss my enjoyment of the first two…well, it’s not the worst of the prequels in terms of quality, but I think it’s the prequel I’ve always enjoyed the least, which is, of course, a big contrast, I think, from most people.  Look, I think it’s big dumb fun, but it’s also a real mess.  Honestly, that’s a sentence that describes the third entry in every Star Wars trilogy, so there you have it.  It does have cool clones, though, and in particular I’ve always been fond of Commander Gree.

THE FIGURE ITSELF

Commander Gree was figure 59 in the Star Wars: Revenge of the Sith tie-in line.  He was one of the late-run figures for the year, hitting retail right before the holidays, which also made him quite difficult to get.  the figure stands 3 3/4 inches tall and he has 13 points of articulation.  Gree made use of the second Phase II Clone Trooper from the line, dubbed “Super-Articulated” at the time.  It was a solid sculpt, and remained the best version of this style of clone for quite a ways after this line, and was re-used to a crazy degree, as you would well expect.  Gree is himself not too far off the standard armor, so it generally works just fine for him.  The main selling point here was the new deco for Gree.  Technically, it’s not entirely accurate to his on-screen appearance, specifically dealing with the details on the helmet, but it reads well enough, and it’s honestly fun and got a sufficient bit of pop to it, so I dig it.  There were two possible shades of green for his visor, darker and lighter.  Mine’s the lighter, which is the one I prefer, even if it’s the less accurate of the two.  Gree is packed with a standard blaster, a removable antenna, and a large missile-launcher-style blaster.  The launcher is laughably silly, but I can again dig it.

THE ME HALF OF THE EQUATION

I recall finding both this guy and Bly in store shortly before Christmas when they hit, but it being so close to the holiday, I couldn’t get them, and my parents weren’t able to get them for me before the holiday craze wiped them out.  I didn’t have to wait too long for him, fortunately.  I recall him being a late winter purchase from Cosmic Comix, who had managed to get in some relatively recent figures and a reasonable enough price post-holidays.  Gree was my favorite clone from the film, and subsequently my favorite figure from this line, so he survived a good number of collection purges.  He honestly holds up really well.

#3753: Jango Fett

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

JANGO FETT — FINAL BATTLE

STAR WARS SAGA (HASBRO)

A week ago, I was writing an intro about The Phantom Menace (for the SECOND time….), and I guess I’ve just decided to make my way on through the Star Wars…es.  So, let’s jump to Attack of the Clones!  Look, I’ve come around on the prequels as a whole in recent years, but Attack is emphatically the worst Star Wars movie, and it’s not even close.  It’s barely even a movie.  It’s a Wikipedia entry that they filmed to bridge the two actual movies in the prequels.  The thing is, I’m nostalgic as hell for it.  And the toys?  Oh, they’re emphatically some of the worst Star Wars toys produced.  But guess what?  I’m nostalgic as hell for those, too.  I’m an enigma, you guys.  Jango Fett was a big deal when Attack hit, and a lot of the toys centered on him.  Here’s the one with the best action feature ever.

THE FIGURE ITSELF

Jango Fett (Final Battle) is figure 31 in the Star Wars Saga line, which ran alongside Attack‘s release.  He was one of the three Jangos available at launch, and the second of the two “standard” ones.  The figure stands 3 3/4 inches tall and he has 13 points of articulation.  His articulation, like so many of the Saga figures, is mostly pointless, thanks to how heavily pre-posed these figures were.  In Jango’s case, that pre-posing is exceedingly awkward, and doesn’t really much allow for…anything.  He’s also super hard to stand, largely because what even are his legs supposed to be doing?  What’s crazy is the’s got actual knee joints, a thing that were still not exceedingly common at this time, and they’re useless, which is just laughable.  On the plus side, I guess the actually quality of the sculpt isn’t bad.  It’s clean and the detailing is sharp, and he’s pretty accurate to the movie.  The biggest drawback (other than the posing) is the advertised action feature, where his gauntlet launches a fire-shaped missile.  It’s not very effective, and it means his left arm is misshapen.  Making up for it, however, is the unadvertised second action feature.  Saga made use of magnets on a number of figures, and a recurring instance was for easily removable body parts, to simulate the damage characters might take.  In Jango’s case, his whole neck joint’s a magnet, so you can behead him, easy-peasy.  It’s so freaking morbid, and I absolutely love it.  Jango’s paint work is a bit murky, which wasn’t uncommon in this era.  He’s got a lot of fake dirt build-up, which is definitely a bit too heavy.  It’s at least all pretty cleanly applied, so there’s that.  Jango is packed with the fire projectile, as well as his twin pistols.  Unfortunately, the holsters are non-functioning on this release, so there’s nowhere to store them.

THE ME HALF OF THE EQUATION

When these figures came out, both of my cousins around my age who collected Star Wars had this version of Jango, but I didn’t, and I always desperately wanted one.  Something about how morbid that head feature was just greatly amused me.  He’s on the short list of Saga figures I’ve purchased as an adult; he was traded into All Time a couple of years ago, and I just couldn’t resist him.  He’s terrible, but at the same time also wonderful.  He’s the perfect encapsulation of my relationship with the movie and its toyline as a whole.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3748: Obi-Wan Kenobi

Posted by Ethan Wilson in Reviews and tagged with , , , ,

OBI-WAN KENOBI

STAR WARS: EPISODE I (HASBRO)

Welcome to draft 2 of today’s review, brought to you by me accidentally deleting all the text I’d written before saving!  Always remember to save incrementally, kids!  Otherwise, you’re gonna wind up writing the same damned review twice.  Yaaaaaaaaaaaaay……

When I wrote this before, I had this whole piece discussing the Prequels and their merits, and the sliding nature of how we’ve all viewed them, as well as how online opinions and peer pressure can seriously influence how you take in media.  Well, I don’t wanna write all that again, so you’ll just have to take my word for it that it was indeed very good and very smart, and I made a lot of excellent and compelling points.  The long and short of it is that maybe we were all a little harsh towards The Phantom Menace.  I haven’t talked Phantom Menace a ton here, especially not its direct tie-in line, largely because I don’t still have much of it.  I do have a lot of the Obi-Wans, though, so here’s one of them!

THE FIGURE ITSELF

Obi-Wan Kenobi was one of the three deluxe releases in Hasbro’s Star Wars: Episode I tie-in line, alongside Qui-Gon and Maul.  They were all released with the other launch product, but, at least from my observation, Obi-Wan seemed to be a little rarer than the other two.  Maybe he was just more popular, though.  At his core, he’s not a terribly different figure from the one in the main line.  He stands about 3 3/4 inches tall and he has 7 points of articulation.  He lacks the wrist swivels and one of the elbow swivels compared to the standard, and his shoulders are rather limited by the nature of the action feature.  The sculpt itself isn’t all that different to the standard.  He’s a little more pre-posed, and the hair braid is swept back, rather than sitting over the shoulder, but the end result is about the same.  There’s a button on the lower back that activates the action feature, but it’s pretty low profile.  The paint work is again pretty similar, with the most notable change-up being the slightly lighter hair color, which winds up being a little more accurate.  Obi-Wan is packed with his standard saber, which is pretty straight forward.  He’s also got a larger “control” saber, which hooks around his waist and activates the swinging feature, but also has its own telescopic blade for…reasons?  I don’t know.  It’s there.  Unless, of course, you’re talking specifically about my figure, in which case it’s not because silly child Ethan went and lost it like some sort of silly child who wanted to pretend he was Obi-Wan or something silly like that.

THE ME HALF OF THE EQUATION

The deluxe version of Qui-Gon was actually the first figure I got of the character, and I liked him more than the standard release.  My seven-year-old brain assumed the same would be true of the matching Obi-Wan, so I desperately begged my parents to get me one.  Well, okay, I don’t know how desperate it really was.  I probably just waited until I saw one in store and asked for it.  Wait, did my parents buy it for me?  I’m suddenly having flashes of my Grandmother buying it for me?  Maybe I desperately begged her for it.  She was the sort that would have actually specifically taken me out to get him (not that my parents wouldn’t; they just had busier schedules), so this tracks.  Huh.  Well, he’s not ultimately that special or unique or different, but he’s hardly bad, and in ’99 he continued my commitment to having all of the Obi-Wans from the movie.

#3732: Momaw Nadon

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

MOMAW NADON

STAR WARS: THE BLACK SERIES (HASBRO)

“An exile from Ithor, Momaw Nadon was a rebel sympathizer who cultivated a hidden garden in the mountains south of Mos Eisley”

Hey, look, I was just talking about the slowdown of Black Series reviews around here on Tuesday, and I’m already reviewing another one.  So much for spacing them out, right?  Alright, so the last one was a rather modern entry in the franchise, but today, I’m jumping back to the beginning, with one of the first movie’s many distinctive alien designs, Momaw Nadon.  Momaw appears only in a head shot during A New Hope‘s cantina sequence in Mos Eisley, and was at the time unnamed.  When Kenner entered their second year with the license, they made up their own version of his body and named him “Hammerhead,” with his proper name not being granted to him until 1989, along with an actual backstory, and a full design.  He’s become a recurring fixture of the Star Wars toy lines since, and now he’s the latest cantina alien to join The Black Series!

THE FIGURE ITSELF

Momaw Nadon is figure 7 in the A New Hope sub-set of Star Wars: The Black Series‘ Phase IV incarnation.  Thus far, five of the seven ANH figures have been cantina-themed, so he’s in good company.  Like Tuesday’s IG-12, Momaw is at the deluxe price point, which still feels kind like a hazy distinction, but he does a have a little more to him than the average Black Series release.  Momaw is a Fan Channel-exclusive offering, so no big box stores for him.  After the poor performance of the last three cantina aliens that went to mass retail, it’s probably not the worst call.  The figure is about 6 3/4 inches tall and he has 26 points of articulation.  Momaw’s sculpt shares a good number of its parts with fellow Ithorian Dok-Ondar, who was a Galaxy’s Edge Disney Parks-exclusive last year.  He gets a new head, forearms, belt/skirt, and scarf, allowing him to be differentiated from Ondar.  It’s a solid sculpt, through and through.  There’s a lot of texturing going on, which looks really great, and the new head’s a good match for what we see on screen.  His articulation scheme’s pretty much what we’ve come to expect from Black Series at this point, so he’s pretty mobile for the most part.  His color work’s not bad.  Notably, the exposed skin gets a wash to help accent the sculpted texturing, which really does help.  In terms of accessories, he does feel a little light.  There’s a blaster rifle, and three different cups.  I don’t know *exactly* what you could give him, but he’s a deluxe, so *something* more would be nice.  Even a recreation of his Power of the Force era big honkin’ gun would be cool.

THE ME HALF OF THE EQUATION

I’d say this guy was an impulse buy, but he wasn’t quite that.  I mean, I didn’t know if I was gonna buy him ahead of time, but by the time he’d arrived in-store, I was pretty sure.  This is just one of those designs I have a hard time saying no to, because it certainly does look cool.  He’s a pretty nifty figure.  Not a ton to say beyond that, but I’m not really sure there’s a ton that *needs* to be said beyond that.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3730: IG-12 & Grogu

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

IG-12 & GROGU

STAR WARS: THE BLACK SERIES (HASBRO)

“Clever Anzellan droidsmiths refurbished IG-11’s salvaged parts into a pilotable frame for Grogu, who operates the droid body like a vehicle. Stripped to base motor functions, the droid was renamed IG-12”

Well, it hasn’t been an *exceedingly* long time since my last Black Series review, but they’re definitely getting a little more stretched thin.  I suppose the line’s just not as much of an all-in thing for me anymore, so I’ve been focusing more on punchier stuff.  I don’t believe I’ve discussed Mandalorian‘s third season at all here in the year plus since it aired, but I did actually quite like it, even if others were a bit split.  It offered more coverage of the IG line of droids, which is always something I’m okay with, especially when it also results in more toys.  And result in more toys, it has.  We got an IG-11 to coincide with the first season (albeit a rather inaccurate one), and while he’s not really coinciding with the third season, we did at least get a version of his salvaged frame, IG-12.

THE FIGURE ITSELF

IG-12 and Grogu are entry 41 in the Mandalorian sub-line of Star Wars: The Black Series’s Phase IV incarnation.  It’s a deluxe-sized release, which is always sort of a hazy kind of a definition with Black Series, but it is what it is.  The figure stands just shy of 7 1/4 inches tall and he has 30 points of articulation, plus an opening torso hatch and moving control sticks.  IG-11’s figure re-used most of IG-88’s mold, which is sensible from a standpoint that the two are the same model of droid, and very similar in design, but less sensible from the standpoint that the 88 mold was rather inaccurate in the first place.  The Vintage Collection actually gave 11 an all-new mold with far improved accuracy, scaling, and articulation, and IG-12’s all-new mold here is taking a page out of the VC book.  He’s about an inch taller, and scaled to match, and also has a much better articulation set-up, most notable at the hips and ankles.  The actual sculpt proper is far more detailed and manages to match up better with what he’s supposed to look like, including the unique hand/manipulators from IG-88.  Also, the covers on the elbow joints are now just part of the sculpt, rather than being rubber sleeves, so I look forward to those not totally disintegrating the way both 88 and 11’s did.  His color work is a little more basic than 11, lacking some of the accenting, but he gets the base coloring down a bit better, and is a little more striking.  IG-12 doesn’t get any weapons (though the manipulators are articulated, so you can easily supply your own, and he’s also all set for future uses of the mold getting weapons), but he does include Grogu (who’s *technically* billed as a separate figure, but we all know the deal), as well as two different members of Babu Frik’s species.  My quick bit of research tells me they’re “Anzellans.”  Cool, he comes with two Anzellans.  All three of the smaller figures fit in the central compartment, and the joysticks can be moved to meet their hands.

THE ME HALF OF THE EQUATION

I’ve loved the IG series for a good long while, and I’m a fan of getting it in toy form.  I loved the original Black Series 88 when I got him, even if he was inaccurate, but the mold was dated, and really not right for 11.  When 11 was a quick re-work, I was admittedly a little disappointed.  I’ve been hoping for some form of updated mold, and when 12 surfaced in the show, I was kind of figuring that would be Hasbro’s ticket to get a new one out.  Of the three potential IG-11 variants, this one’s admittedly the one I wanted the least, but that doesn’t mean I *didn’t* want it, and it turned out even better than I’d expected.  I’m eager to get proper updates to 11 and 88 in the future using these molds, and I would honestly kill for a Marshall IG-11.  Okay, maybe not kill, but I’d pay good money for it.  You heard me Hasbro.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3718: Commander Bly

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

COMMANDER BLY

STAR WARS: REVENGE OF THE SITH (HASBRO)

“Equipped for battle on the exotic fungus planet of Felucia, Commander Bly fights alongside Jedi Knight Aayla Secura. When the secret Order 66 is issued, Commander Bly suddenly turns on Secura and the rest of the Jedi.”

We’ve arrived at another Friday review, and I’m once again doing a bit of clearing house on some of the hodge-podge of photographed Star Wars figures I haven’t yet reviewed.  Going into today’s review, I felt like I’d discussed the Revenge of the Sith tie-in line before, but a quick doublecheck showed that I have, in fact, reviewed nothing from this line.  Crazy.  Well, now’s as good a time as any to start, I suppose, so let’s kick things off with Commander Bly.  Everybody loves Bly!

THE FIGURE ITSELF

Commander Bly was one of the last run Revenge of the Sith tie-in figures, hitting just before the holiday season in 2005, alongside fellow Clone Commander Gree.  Bly was actually intended to use the red color scheme used for the standard “Clone Commander” figure from the launch assortment for the line, but he was changed prior to the film’s release, so that figure had no direct counterpart on screen, and Hasbro had to follow-up with this update later.  There are also no less than three paint variations for Bly himself, as Hasbro kept tweaking him to be more accurate.  The figure stands about 3 3/4 inches tall and he has 22 points of articulation.  The clones were the best molds to come out of the RotS line, especially in terms of articulation.  This one’s a little restricted at the legs, largely due to the plastic kama, but he’s still quite posable, and also looks the part.  He’s the same mold as the not-Bly commander, which makes sense, since it was originally supposed to be him and all.  It’s got working holsters and a visor that goes up and down, which are both pretty standard for the character.  His paintwork, which was the subject of much adjustment, is the least adjusted version on mine, so he’s still got the white joints at the shoulders and lacks the brown detailing on the helmet and chest.  Still, it’s generally not bad, and the application’s all pretty clean, even if he does look a bit like mustard.  Bly was packed with the long blaster and two pistols, which the package dubbed “Battle Gear”.  He lost the grappling hook thing that the standard Commander had, which was kind of a bummer, but was also the least essential thing in the armament.

THE ME HALF OF THE EQUATION

When this guy and Gree dropped, I really wanted them.  Unfortunately, they suffered from that last assortment syndrome, which made them both very rare for a while.  By the time I actually found them, they were aftermarket pricing, and I could really only afford one, so I just got Gree.  I didn’t get a Bly for over a decade, since he was always *just* above what I wanted to pay.  I did finally get a loose one courtesy of All Time.  It was a while back, maybe in early 2020?  That’s when I took the photos seen here, right around the same time I got the Black Series version.  He’s cool.  Like I said, the clones are really the best figures from Revenge of the Sith, and Bly’s one of the best clones, so just generally solid.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3713: Endor Rebel Soldier

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

ENDOR REBEL SOLDIER

STAR WARS SAGA (HASBRO)

“When Han Solo, Leia Organa and Luke Skywalker land on the forest moon of Endor to destroy the shield generator protecting the Death Star II, they are accompanied by a squadron of commandos. Loyal and courageous, these soldiers are inteprid fighters for the cause of the Rebellion.”

Wow, a Star Wars Saga review?  I really must be scraping the bottom the barrel for review subjects.  I mean, going to Saga.  Saga, people.  I mean, in the 3712 reviews here on the site, I’ve only reviewed a single Saga figure up to this point.  Which, honestly, pretty good metrics, right?  And even the one review can be chalked up to it being my first year reviewing and me just not knowing any better.  What am I getting at here?  Well, generally, that Star Wars Saga, the line designed to tie-in with Attack of the Clones’ product launch, is…well, it’s not a great line.  It wasn’t great when it was new, and it has’t gotten better with age.  The figures were all sorts of pre-posed, impossible to keep standing, and frequently just sort of weird looking.  But, I guess I’m reviewing one of them, and none of you can stop me because it’s my site and I do what I want.  It’s at least an Endor Rebel Soldier, so I think that makes it better?

THE FIGURE ITSELF

The Endor Rebel Soldier is figure No. 33 in Hasbro’s Star Wars Saga line-up.  He was part of Collection 2 and was released in 2002.  There were two variants: one bearded and one not.  This one is the not, in case you couldn’t tell.  He was the later of the two releases, and the rarer when the line was new, though it seems like after the fact, they’re pretty evenly balanced.  The figure stands 3 3/4 inches tall and he has 10 points of articulation.  The articulation’s not a bad count, but it’s largely unusable thanks to how the sculpt is set-up.  Like the rest of the line, this guy is very pre-posed.  He’s got sort of a lunging-while-pointing-his-blaster look, which, I guess isn’t a terrible choice for the character.  Honestly, the arms aren’t bad (though they’re hit pretty badly by the sculpt interfering with articulation, since the jacket overlay piece covers the shoulders, making those joints essentially worthless), but the legs seem a little odd.  Also, with such a very specific pose, army building feels a little difficult, since you wouldn’t expect a bunch of guys to all be running around in exactly the same rather strange fashion.  Unlike prior Endor Rebels, this one got a removable helmet.  It’s a nice piece, and it sits very well on the head.  Said head is a nice sculpt of its own.  It doesn’t appear to be based on any specific Rebel from the movie, instead going for more of a general purpose thing.  The paint work on this figure is notable for being the first time we really got a proper deco based on what the Rebels are actually wearing in the movie, rather than the straight green up and down.  The camo pattern on the legs is a little odd, and the feet are the wrong color, but it generally isn’t bad, and the application works out pretty well.  He’s packed with his blaster rifle and a backpack.  The rifle’s a bit warped, since he was packed holding it, but it does at least get the cool blast effect piece, which is pretty nifty.

THE ME HALF OF THE EQUATION

I’ve always really dug the Endor Rebels, and the PotF one was one of my favorites from that line.  I wanted the Saga version, specifically the not bearded one, when they hit, but all I could ever find was the bearded one, who I begrudgingly bought, but decided to get rid of later.  I eventually got this one when I sizable run of Saga figures got traded into All Time way back in 2018.  Like last week’s Durge, I took the pictures of this guy pretty much right away, but just never got around to actually writing the review.  So, you know, here we are, I guess.  He’s not bad.  Not great, but given the rest of the line, he could certainly be worse.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3708: Durge

Posted by Ethan Wilson in Reviews and tagged with , , , ,

DURGE

STAR WARS: CLONE WARS (HASBRO)

Genndy Tartakovsky’s Star Wars: Clone Wars is something I don’t talk about with any real frequency, but that’s not for lack of love, I assure you.  It’s easily the best thing from the prequel era released during the run of the three films, and even when you expand past that, it’s really only rivaled by the 3D Clone Wars, and that one needed a much longer run to achieve the rivalry.  While the show worked with a lot of pre-existing characters, it had a few originals, which included Separatist Bounty Hunter Durge, who serves as one of the notable antagonists.  Durge is surprisingly sparse on action figure coverage, but was at the very least part of the short tie-in line for the show.

THE FIGURE ITSELF

Durge was released as a single figure in the second assortment of animated Star Wars: Clone Wars figures, released in 2003.  He was also subsequently re-released in 2005 as part of the “Sith Attack Pack” entry in the Commemorative DVD Collection, alongside Asajj Ventress and General Grievous.  Mine is the single release, though the two are more or less identical.  The figure stands about 3 3/4 inches tall and he has 5 points of articulation.  As with all of the 2D animated figures, this one prioritizes form over function.  His articulation his limited to the neck, the shoulders, and wrists, with no movement below the torso at all.  The movement he *does* have is largely for minor tweaks to the one predetermined pose he’s got.  Ultimately, with Tartakovsky’s style, the glorified statue approach is the best way to handle things.  It translates very well to this set-up, and they’ve made him work pretty well from most angles.  He’s clean and he’s very stylized, and it’s very clear who it’s supposed to be.  His color work is flat colors, capturing the cel animation’s coloring set-up.  The application’s all fairly clean, and there’s no notable missing details.  He’s packed with his jousting-lance-thingy from the show, as well as one of the stands that was packed with all of the figures.  It’s not much, but none of these figures were very accessory heavy.

THE ME HALF OF THE EQUATION

As much as I loved the show, I had very few of the figures from it at the time of their release.  The line was just generally hard to find.  Durge in particular was one I wanted but never could get.  I wound up getting him from Cosmic Comix back in late 2017, I believe?  I even took the photos that accompany this review back when I got him, but I just kept putting off writing the actual review until this very moment.  That’s just how I roll sometimes.  He’s pretty par for the course on this line.  They’re not astoundingly fun to mess with, I suppose, but they sure do look really cool.

#3703: Darth Vader

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

DARTH VADER

STAR WARS: POWER OF THE FORCE (HASBRO)

“Inside the Death Star’s detention corridor, Darth Vader is intent on snapping Princess Leia’s defiance. Accompanied by an Imperial interrogation droid, the Sith Lord enters cell 2187, determined to learn the location of the hidden Rebel base from his royal prisoner”

Jumping from one caped guy in black to the next, in 1/18 scale no less!  So, look, guys, I have a lot of Star Wars figures sitting around here.  There’s a notable backlog of those guys I gotta work my way through, so I might as well do a little bit of that now.  And, if I’ve got a helping of Star Wars reviews coming at you, you know I gotta start it off with Power of the Force, because here I am with a bunch of Power of the Force, specifically.  The line had an impressive coverage of the depth of characters from the galaxy far, far away, but it also had a lot of variants of the main characters from the original trilogy.  For characters with similar looks for all three films, such as Darth Vader, the figures were pretty similar and meant to be more all-purpose, but before the end of the line, they started going a bit more movie-specific.  I’m looking at the line’s last take on Vader today.

THE FIGURE ITSELF

Darth Vader was added to the Power of the Force line in 1999, as part of the first of the two CommTech assortments that wrapped up the line.  As the line’s last hurrah, there was certainly a focus on heavy hitters.  The figure stands just over 4 inches tall and he has 8 points of articulation.  He’s got those extra swivels on his elbows, as the line experimented with going beyond the basic 6 they’d launched with.  It doesn’t do a ton, but it adds to the variety, I suppose.  For his last entry in the line, Vader goes decidedly back to the beginning, with our very first specifically A New Hope-inspired Vader, focussing directly on his appearance in the interrogation scene.  His sculpt was all-new, and is quite a strong one.  It wound up getting re-used a bit down the line due to how strong it was.  It’s a little pre-posed, again going into the scene specific bit, with his hands posed near his belt.  The proportions are solid, moving entirely away from the buff look of the early figures.  The details are also really sharp, which is nice.  The cape is cloth this time, which is a little awkward at this scale, but ultimately works okay if you get the posing right.  His paint work is simple, largely relying on molded black plastic, but there’s some variety worked in there.  Vader was packed with the interrogation droid (aka Dr. Ball, MD), who has its own little flight stand.  He’s also got the CommTech stand, for CommTech stand purposes.  He is, notably, devoid of a lightsaber, since there’s a hilt sculpted to the body, and he doesn’t use the saber in the Interrogation scene.  Later uses of the mold would fix that, though.

THE ME HALF OF THE EQUATION

It took me a surprisingly long time to get this figure.  When I really jumped into the Power of the Force thing, All Time even had a sealed one, but I didn’t snag him at the time, and he sold before I got him.  My first encounter with this mold was actually one if its later uses, namely the comic pack version, so I did at least know what to expect.  I wound up snagging this one loose just a few months ago.  He’s honestly pretty solid, and probably the best Vader in the line, so it’s a good note to go out on.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3687: R5-D4, BD-72, & Pit Droids

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

R5-D4, BD-72, & PIT DROIDS

STAR WARS: THE BLACK SERIES (HASBRO)

“Peli Motto makes quick work of refueling and repairing battered ships with the help of R5-D4, BD-72, and a team of hyperactive pit droids.”

There’s a lot of cool things going for Star Wars as a concept, but one of the most infinitely marketable pieces has to be the droids. There’s just so many models, and there’s a bunch of unique names thrown at the models, and when they introduce new models, we get to see them get worked into the background with other, older models, and that’s cool too. And there are so many toy possibilities, too, which works out very well for me, a toy collector. The titular character from The Mandalorian having a distrust of droids at the outset did limit the droids he interacted with initially (barring, of course, IG-11, whose just too awesome to be limited), but they’ve worked their way into the show as it’s progressed, and there’s even been enough of them to warrant a whole special pack. How about that?

THE FIGURE ITSELF

R5-D4, BD-72, and the Pit Droids are a Target-exclusive Star Wars: The Black Series offering, which started showing up mid to late summer.

First and foremost, we’ve got the one “proper” figure of the set, R5. R5’s reappearance on the show was a fun little touch, since we’d seen nothing of the little guy since his motivator blew in A New Hope. Obviously, with stuff still happening on Tatooine, it’s not the craziest thing for him to reappear, but I don’t know if anyone was expecting him to actually get to go on a full-fledged mission with Mando.  R5 got a GameStop-exclusive Black Series release back in 2017, but that was on the old, smaller Astromech body.  Since then, of course, Hasbro has totally redone the Astromech, and we actually got an updated R5 on that body last year as a single.  This one is more or less the same as that one, albeit with a few minor differences.  Regardless of release, he’s a new head on the body of R2, which is pretty typical of an R5 (you know, unless he’s the GREATEST R5 FIGURE OF ALL TIME).  It’s a pretty solid mold on its own, and the new head makes it nice and distinctly different from the prior R2.  The one structural difference between this figure and the single is that his motivator panel, removable on the single, is new glued in place.  His paint work is pretty much the same, and is likewise pretty similar to the R2, just with some adjusted colors.  Application is generally pretty clean, which is cool.  I’ll be honest, though, I kind of miss the shiny silver sticker from the GameStop one, as hokey as it might have been.  In terms of accessories, R5 gets the same five attachments as his single release (borrowed from the R2 mold), as well as brand new swappable side panels featuring the jet boosters used by R5 in The Mandalorian.  Presumably, we will at some point see these get used on some form of R2 re-release, since it was the only notable attachment missing from the last one.

Since first debuting as a pack-in figure with the original Cal Kestis figure in 2019, we’ve had our fair share of BD droids.  Most of them have actually just been BD-1, but the BD that appears in The Mandalorian is officially a different droid, BD-72, making this officially a new character.  The mold’s a straight re-use, which is fair enough, because it’s quite a nice one, being surprisingly poseable *and* surprisingly stable for a mold of its size.  It’s got a new deco, which is fairly basic, but heavier on the blues than the original.

Now we get to the real meat of the set.  Look, R5 and BD are all well and good, but the real reason anyone’s buying this $40 set isn’t for the two minor tweaks to prior releases; no it’s for the Pit Droids!  Though we’ve technically gotten a Black Series Pit Droid once before, it was in one of the Disney Parks-exclusive multipacks, which is far from the most convenient way to get a new mold.  Thankfully, this set makes up for it, with two whole Pit Droids, each in their own color scheme!  Yay!  The figures both stand 4 inches tall and they have 23 points of articulation.  They’re quite poseable, and I’m glad their smaller size doesn’t make them too spindly to allow for that.  The sculpt is a solid recreation of the design from the movies and shows, and definitely looks he part of the Pit Droid.  It’s a nice, clean visual, and it’s translated well here.  But, one of the coolest things about the Pit Droids is how they fold up when not in use.  Their smaller figures could never quite capture that, but these ones actually do!  Sure, it’s a little fiddly to get them there (and there’s no instructions like a Transformer would get), but you can get a surprisingly accurate folded up look out of these two.  In terms of coloring, we get one Pit Droid in tan, and the other in maroon.  The bulk of the coloring for both is molded, of course, with paint for the “eyes”, and a little bit of accenting for both.  On the tan guy, it’s a little more subtle, while the maroon guy gets some more obvious offsetting.  Of the two, I’m partial to maroon, but they’re both fun.

THE ME HALF OF THE EQUATION

I quite like Pit Droids, but they’re frequently tricky to get as figures due to weird release schemes.  I wasn’t thrilled when the first Black Series one was stuck in a Parks set with other figures I didn’t really need, so I do like another option.  Not sure Target-exclusive set with other figures I don’t need is *ideal*, but it’s not the worst thing ever.  Since I opted not to grab the single R5 release, he’s not really a double up for me, at least with this mold, and another BD isn’t the worst thing.  Plus, I do get two whole Pit Droids, and they’re truly fantastic little figures, so I’m happy to have them.