Tag Archives: Super Awesome Wife

#1163: Director Krennic

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

DIRECTOR KRENNIC

STAR WARS: THE BLACK SERIES

krenicbs1

Star Wars is a franchise just as much defined by its villains as its heroes (if not more so).  Darth Vader is pretty much THE iconic movie villain, and every subsequent movie’s villain has had to do their best to live up to the shadow cast by Vader.  Rogue One of course made use of Vader himself, but only as an incidental antagonist.  The primary antagonist was Director Orson Krennic, who is pretty much a departure from Vader in every possible way.  He’s small in stature, largely unimposing, speaks in a notably unrefined manner, is a fan of empty threats, and is even dressed primarily in white.  He was a refreshing change of pace for the franchise’s villains, and Ben Mendelsohn gave a fantastic performance in the role.  Krennic has proven to be one of the more difficult characters to track down in figure form, though he’s available in both primary scales.  I was fortunate to get ahold of the larger figure, which I’ll be looking at today.

THE FIGURE ITSELF

krenicbs2Director Krennic is part of the second series of Rogue One-based Star Wars: The Black Series figures, which is technically Series 8 of the “red box” Black Series that was launched with The Force Awakens.  Krennic is figure 27 in the line, making him numerically the first figure in the series.  The figure stands about 6 inches tall and has 27 points of articulation.  Krennic is sporting an all-new sculpt, but I’ll be genuinely surprised if we don’t see most of this body again for Tarkin at the very least.  It’s a very good translation of the Imperial officer’s uniform seen in all of the OT films.  All of the smaller details are properly placed and there’s even a nice bit of texturing on the tunic and pants, showing the fiber of the fabric.  The neck is rather on the scrawny side (which, admittedly, is another point in favor of this being re-used for Tarkin), but that’s actually covered pretty well by the cape.  The cape is sculpted, which is different for the line, since all the prior capes/robes have been cloth.  I’m certainly not complaining; it’s obviously a bit restricting, but for a character like krenicbs4Krennic, who’s not incredibly mobile, and the end result is immensely better looking than a cloth piece would be.  The head sculpt is okay, but not anything outstanding.  From certain angles, you can see Mendelsohn in there, but by and large he’s rather off.  Still, it’s not an awful sculpt, and far from the worst likeness the line has given us.  Krennic’s paintwork continues the general upward trend we’ve been seeing on Hasbro’s collector oriented lines.  While he’s not as impressive as, say, K-2 or the Scarif Trooper, the work here is still very clean, and matches well with what’s seen on screen.  Of note, the hair is greyer here than it was on the Force Awakens Han from earlier this year, though it’s still a little closer to a light blonde than what’s seen in the movie.  Clearly, someone in licensing is against grey hair.  In addition to the removable cape, Krennic includes his custom blaster pistol, which can be stored in his holster.

THE ME HALF OF THE EQUATION

While Super Awesome Girlfriend was looking for the Leia figure I reviewed yesterday, she came across this guy and decided that I needed him.  She does that a lot, but she also tends to be right about that a lot too, so yeah.  After seeing the movie, I’m definitely happy to have him, and this figure looks really cool when flanked by all of the specialized Trooper’s from the movie.

krenicbs3

#1162: Princess Leia

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

PRINCESS LEIA

STAR WARS: ROGUE ONE

leiarebels1

Okay, I’d like to start today’s review by saying that the subject of today’s review was picked and put on the review schedule over a month ago.  Obviously, I wasn’t expecting Carrie Fisher’s recent heart attack.  I and everyone else here at the FiQ are praying for the best for Carrie and the rest of her family.  In honor of her and in support of her ongoing recovery, here’s this Princess Leia figure.

EDIT: I just learned of Ms. Fisher’s passing.  My thoughts and prayers go out to her family.  She will be greatly missed.

THE FIGURE ITSELF

leiarebels2Princess Leia was released in the second series of Star Wars: Rogue One figures.  She’s not actually based on Rogue One, but is instead based on her appearance from Rebels.  The figure stands about 3 1/2 inches tall and she has 5 points of articulation.  In Rebels, Leia’s design was based on some of the early Ralph McQuarrie designs for Leia, which is in keeping with the aesthetic of the rest of the show.  The figure gets an all-new sculpt, which does a pretty solid job of translating the design into plastic.  While Leia is a cartoon version of her character and meant to be a good decade or so younger than her movie appearances, you can still see a bit of Carrie Fisher in there, thus allowing you to pretty easily identify who she’s meant to be.  The proportions are all pretty sound (though obviously a little on the exaggerated side), and the details are all nice and sharply defined.  The hip articulation coulee possibly be worked into the sculpt a little more smoothly, but that’s really the only negative I can think of.  Her paintwork is probably some of the sharpest work I’ve seen on any of these smaller scale figures.  The color palette is nice and distinct, and all of the application is nice and clean.  No misplaced lines or wonky hair on this figure.  For accessories, Leia sports the E-11 Stormtrooper blaster, as well as yet another version of the grapple piece included with Cassian and Sabine.  It’s getting common enough that I think the missile launchers should be worried about being replaced.

THE ME HALF OF THE EQUATION

I was unable to find Leia when I picked up the rest of the Series 2 on Black Friday, which actually let me down a bit, since I was quite looking forward to the figure.  I ultimately found her a few weeks later at the same time as the Black Series Scarif Trooper, but only had the funds for one, so the trooper won out.   However, I mentioned it to Super Awesome Girlfriend and if you know anything about her, you know where this is going.  Yep, the next time she was at Walmart, she made a point of finding this Leia figure for me.  This is a pretty fun little figure, and a nice addition to my steadily growing Rebels collection.

leiarebels3

#1159: ODST Rookie & Spartan Hayabusa

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

ODST ROOKIE & SPARTAN HAYABUSA

HALO MINIMATES

odsthayabusa1

Hey guys!  For today’s review, I’ll be doing something just a little bit different.  Today marks mine and Super Awesome Girlfriend’s third anniversary, and in honor of the occasion, we’re going to being partnering up for a review!  We’ll be looking at something that combines two of our favorite things: Minimates and Halo!  The set in question is ODST’s main character Rookie and Halo 3’s Hayabusa armor.  I’ll be looking at the Rookie, and Super Awesome Girlfriend will be following up with the Hayabusa. 

Ready Super Awesome Girlfriend?

Yes? O.O

Close enough!  Let’s see how this goes!

THE FIGURES THEMSELVES

The Rookie and Hayabusa were released as part of the fourth TRU-exclusive series of Halo Minimates.  Both of them are exclusive to this particular two-pack (though there was another Hayabusa released later in a different color scheme).

ODST ROOKIE

odsthayabusa3It’s no secret (Seriously, it’s no secret at all, he geeks out about the armor every time he see it!) that I’m quite a fan of the ODST design.  Recently (well, several months ago, but within the last year), I played through Halo 3: ODST and it’s probably my favorite game in the series.  The only ODST proper to get released as a Minimate was the Rookie.  He’s not my favorite member of the ODST squad from the game (I didn’t really care for him either…), but he’s certainly better than nothing (and still plenty cool).  The Rookie stands about 2 1/2 inches tall and he has 12 points of articulation (the boots remove the ankle articulation).  The figure uses the usual Minimate body as a starting point.  He’s got add-ons for his helmet, chestplate/belt, shoulder pads, thigh armor, gloves/wristbands, and boots.  It’s also worth noting that he uses the special thin waist piece created specifically for the Halo line in order to keep the belts from making them too tall.  The general quality of the sculpted pieces is pretty solid.  The helmet is the same one used on the Spartan ODST; I have some minor issues with it, but by-and-large it looks pretty good.  The rest of the parts capture the general ODST armor pretty nicely, though they do end up making him a bit bulkier than even the Spartans in this same line.  Still, independently he looks pretty awesome, and since scale’s never been totally perfect in ‘mates anyway, I don’t really mind all that much.  The paint on the Rookie is rather on the dull side, but that’s actually accurate to his in-game design, so that’s not a knock against him.  The application is overly pretty clean.  Not the sharpest work ever, but certainly not bad.  The Rookie included his signature silenced SMG, which he can hold decently enough, though not two handed as he does in the game.  I must say, it’s weird reviewing a ‘mate that predates when clear display stands were standard.

SPARTAN HAYABUSA

odsthayabusa2Wow, it’s been a while since I’ve written an action figure review! I should probably catch up…

This isn’t the first Hayabusa figure that I’ve received from Ethan. The other figure is a much larger (blah-blah inches tall? It’s about 5 —Ethan) and is the only other Hayabusa figure that I know of (riiiiiiight Ethan? Apart from color variations, yes). Like the figure above, Haya is about 2 1/2 inches tall with a whopping 12 points of articulation. He has the standard Minimate body with the special Halo waist piece, he puts anorexic skinny to shame, see why it’s different in the section above. He’s got add-ons for his helmet, chestplate/belt, shoulder pads, thigh armor, gloves/wristbands, and boots. Haya’s boots and gloves/wristbands are thinner than previous Spartan minimates. His other add-ons are obviously unique, the Hayabusa armor is much different than your standard Spartan design or any other amor variant. I really enjoy the sculpting of this figure, I believe it’s a pretty good replica of the original armor considering the size of the figure. My favorite part of the figure is the helmet, I believe it’s the most difficult piece to make true to the video game design, but they did a fantastic job of it. It’s my favorite part because it looks like the figure is sporting a white Tom Selleck mustache. I know, it’s an odd thing to note about a figure but what can I say, I’m weird that way. The rest of the armor is also pretty cool, makes him look slick and intimidating. Haya’s paint job is a magnificent shade of bright red, much brighter than other Spartan Minimates. The white accents on the helmet and shoulder pads also help to brighten the red and make the figure POP! The only thing that I’m disappointed about with this figure is that he comes with just your standard battle rifle, which is my least favorite weapon. In the Halo games you can unlock a katana to go with the armor, which would have been wonderful to have. Now, I can understand why they wouldn’t include a katana, because it might’ve been to difficult to do. However, the figure doesn’t even come with an energy sword, one that the Elite’s tend to carry, which I believe would’ve added to his badassatude and definitely shows up in many game shots of the armor. Overall, it’s a pretty stellar figure that triggers the nostalgia and the memories of the hours spent over the summer collecting all the damn skulls to unlock that armor. Some of those memories were fonder than other, all of them had cursing or some childish variant if parents were in the room, it was a difficult armor to get.

THE US HALF OF THE EQUATION

I picked up this set from Yesterday’s Fun, while on vacation this year.  I’ve got a real soft spot for the ODSTs and I knew Jess really liked the Hayabusa, so the pairing was really quite convenient.  I know I was pretty happy wth the final product.  How ‘bout you, Super Awesome Girlfriend?

I really do love this figure! Hayabusa is by far my favorite Halo armor. Me and a friend of mine spent the majority of our summer in Middle School trying to get this armor in Halo 3. It took a lot of time, cursing, and Googling to find those skulls. We spent most of our time not in finding the skulls but getting to them without dying, our older siblings and parents had a lot of fun watching us and hearing our outbursts. This armor will always hold a special place in my heart, mostly because of them memories that went with it. As for figures, I have to agree with Ethan and say that I’m happy with the final product, really happy!

#1138: Daredevil

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

DAREDEVIL

MARVEL SUPER HEROES: SECRET WARS (MATTEL)

ddsw1

When you’re talking Marvel Super Heroes action figures (or really action figures from the big two in general.  Or even just licensed action figures in general), the first major blip on the radar was Mego’s World’s Greatest Super Heroes line.  That line gave us our first figures of a number of Marvel’s best known characters.  However, there were a number of characters who found themselves left out of the whole action figure thing until the second blip on the Marvel action figures radar, Mattel’s Secret Wars line.  One such character was Daredevil, a character who has recently come into a fair bit of popularity on his own.

THE FIGURE ITSELF

ddsw2Daredevil was released in Series 2 of the Marvel Super Heroes: Secret Wars line.  This was his very first action figure, but it’s kind of amusing to see him crop up in this line, given that he wasn’t present for the actual comic series it was based on (don’t worry, he was in good company; none of the Series 2 figures but the Symbiote Spider-Man were from the comic).  One presumes that his presence in the line over any of the many characters who were actually there has more to do with his relative lack of new pieces than anything else.  The figure is roughly 4 1/2 inches tall and has the same 5 points of articulation that all of the other Secret Wars figures had.  Daredevil uses the standard male body, with only a unique head sculpt to set him apart from the rest of the line.  It’s a pretty good sculpt, though the neck does seem just a touch too long for the body.  Still, the actual head is a pretty good rendition of ol’ Hornhead, so I can’t really complain.  Also, like Spider-Man, Daredevil’s already rather simple design means he’s not a bad fit for the admittedly doughy base body.  Daredevil, like so many of the other figures in this line, relied heavily on paint, and, just like all those other figures, he’s also rather letdown by said paint.  I mean, it’s not awful.  They molded him in a decent red, and what’s there is pretty sharp.  The problem is, what’s there isn’t all that much.  He gets the logo, his lower face, and then the front third of his belt, the front quarter of each boot, and the outward quarter of each glove (which is inexplicably up at his elbow).  Why they only gave him part of each glove and boot is beyond me, and it ends up looking really strange.  Couldn’t they just finish those lines?  Or, if they were really being that cheap, just leave those lines off entirely?  Also, just like his companions, Daredevil’s paint is very prone to wearing off, as you can tell by the state of my figure’s nose.  Daredevil was packed with his usual billy club, and, of course, the weird holographic shield thing that every figure in the line had.

THE ME HALF OF THE EQUATION

Geez Ethan, for someone who swears he’s not trying to collect this line, you do seem to have quite a lot of them, don’t you?  Yeah, weird voice in my head, I do.  This one’s not my fault, though, I swear.  This is another addition to my collection courtesy of my Super Awesome Girlfriend, who bought him for me from Yesterday’s Fun over the summer.  I gotta say, as many issues as there are with this figure, I really find myself liking him.  And really this line in general.  Yep, I think I’m gonna end up with this whole line.  Crap.

#1116: Doctor Strange

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

DOCTOR STRANGE

MARVEL LEGENDS

drstrangemcu1

In my Mordo review, I noted that Chiwetel Ejiofor’s performance was one of my favorite parts of Doctor Strange.  While a movie’s supporting cast is certainly important (and Doctor Strange probably had one of the MCU’s best supporting casts so far), you’ve got to have a good lead to make it truly work.  Fortunately, Doctor Strange had a very strong lead in Benedict Cumberbatch, who got just the right mixture of bombast, pomposity, arrogance, and a tiny bit of genuine likability, which made Stephen Strange a great centerpiece for his self-titled movie.  I know some people were hating on his American accent, but I actually didn’t think it was that bad. For some reason, the trailer’s opted to use the one or two lines where he slips up, which seems unfortunate.  Regardless, I look forward to seeing more from Cumberbatch’s Strange in future films.  In the mean time, here’s one of his action figures!

THE FIGURE ITSELF

drstrangemcu2Doctor Strange is the fifth figure in the Dormammu Series of Marvel Legends.  It seems a bit odd for him to be nearer the end in the numbering, especially since the Astral variant of this figure (which he shares his packaging, name, and bio with) is figure 1 and the comic-Strange is 2.  Seems weird to me.  Also, for a character who’s still being introduced to the masses, his bio is the painfully short, painfully generic “The Sorcerer Supreme combats evil using many forms.”  Like, his actual name isn’t even mentioned.  What’s up with that?  Honestly, I’m probably making a bigger deal out of all of this than I should.  It’s just packaging.  What about the figure?  Well, he’s 6 1/2 inches tall and he has 31 points of articulation.  He’s an all-new sculpt, albeit one that is mostly shared with the Astral Doctor Strange.  It’s a very nice sculpt, definitely among the best of the MCU sculpts Hasbro’s put out.  There’s a lot of really nice layer work on his various costume pieces, as well as some really cool texturing, especially on the tunic.  The head sculpt presents a pretty good likeness of Cumberbatch, though he’s a lot cleaner looking here than he is for most of the drstrangemcu5movie (by the time he’s fully geared up, he’s taken a bit of a beating).  At the very least, I feel like his hair should be a bit messier.  That being said, disheveled isn’t the easiest thing to translate into sculpted media.  Both the Cloak of Levitation and the Eye of Agamoto are both removable pieces.  The Cloak is nicely sculpted, but seems just a bit on the thick side for me.  It doesn’t ruin the figure, but it does make posing him a little more difficult.  The Eye is a nice enough piece, but it’s hard to get it to stay in place, though the Cloak being on top of it helps in this regard.  Strange’s paintwork is pretty solid.  It’s certainly clean, though, as with the head sculpt, it’s a bit cleaner than he was in the movie.  Also, like Mordo, Strange still lacks any sort of accent work, but, unlike Mordo, he’s got enough distinct colors present that he’s not too drab looking.  Strange includes two sets of hands in gripping and spell-casting poses, as well as a magic shield thingy, and the left leg of Dormammu.  The hands are fun (and I’m always appreciative of extra hands).  The shield looks cool from the front, but is a bit silly from behind, since he’s just holding it with a dinky little handle.

THE ME HALF OF THE EQUATION

I found Strange at the same time as Enchantress (after not finding him when I got Mordo and Iron Fist).  I wanted him, but wasn’t 100% sure I was going to get him right then.  Of course, then Super Awesome Girlfriend intervened and insisted on buying him for me (to be fair, the TRU trip where I found him was at the end of a rathe rough week for both of us, and she apparently feels better when she buys people stuff).  I’d say he were my favorite figure in the series, were it not for the other there figures I have from this series being really, really good too.  I don’t know that I can fairly pick a favorite.

And that’s it for the Dormammu Series reviews.  It’s worth noting that there are four more figures and a Build-A-Figure, but they’re largely very similar to prior items I’ve already looked at, with Astral Strange being mostly the same as this one (with the obvious change in coloring), Comic Strange being pretty much the same as the HB Doctor Strange (just with an added cape), Brother Voodoo being a slightly tweaked version of the SDCC version, and BAF Dormammu being largely the same as the Dormammu from that same set.  The only unique figure I haven’t looked at is Nico, who is actually in Super Awesome Girlfriend’s collection, so it’s up to her to review that one.

drstrangemcu3

#1114: Iron Fist

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

IRON FIST

MARVEL LEGENDS

ironfisthas1

Hasbro seems to have a lot of trouble placing Iron Fist.  Why?  Well, the guy’s now gotten two different figures from their re-branded Marvel Legends line, and in both cases, he was the one figure in the set whose connection to the overall theme was tenuous at best.  I’m not complaining, mind you.  I like me some Iron Fist.  And, since he’s got his own Netflix show on the horizon, it’s not exactly a huge surprise that Hasbro opted to get out another figure of him sooner rather than later.  Now, if someone can explain to me what he’s doing in a Dr Strange set, we should be all good to go!

THE FIGURE ITSELF

ironfisthas3Iron Fist (who, like so many figures in this line, gets that “Marvel’s” possessive added to his name, just so you don’t mistake him for someone else’s Iron Fist) is part of the recent Dr. Strange-themed Dormammu Series of Marvel Legends, where he’s figure 8 in the lineup.  He’s seen here in the green jump-suited look he had during Matt Fraction and Ed Brubaker’s defining run on the character.  It’s one of those modern updates I can get behind, where it takes all of the important elements of the character, but also removes some of the sillier, more dated bits, like the huge collar, deep, deep, (deep!) neckline, and slippers.  It’s also nice to see it here because, despite being the character’s main look during a very popular run on his series and for some time after, it hadn’t yet gotten the Legends treatment (it got the Marvel Universe treatment, but the less said about that, the better).  The figure is about 6 1/4 inches tall and he has 34 points of articulation.  Iron Fist is built on the Pizza Spidey body, a choice that surprised a few people.  Generally, Iron Fist is depicted a little larger than this body (it’s been a story point that he can convincingly double for Daredevil, who was on the Bucky Cap body).  That being said, this body allows him a wider range of posability, and it’s not too far removed from the build David Aja gave him when he first started wearing this costume.  Danny gets a new head sculpt and sash, which are similar to those seen on the prior Iron Fist, but notably improved in a few ways.  The head in particular is less boxy and smooth than the last one, which is a definite step up.  He also gets a new set of forearms, with two sets of swappable hands.  Sadly, he doesn’t have the huge selection of hand poses that the last figure possessed, but he does get a pair of translucent fists demonstrating his power, as well as a pair in thick wraps.  I prefer the wrapped look myself, but both sets are pretty cool.  Iron Fist’s paintwork is pretty solid.  The colors match up pretty well with those seen in Immortal Iron Fist, especially the slightly muted green.  In addition, everything is pretty solid in terms of application, and the wrapped fists even have a nice wash to bring out more of the details.  In addition to the previously mentioned swappable hands, Iron Fist also includes a pair of flame effect pieces, which can easily fit over either set of hands, as well as the shoulder pads of Dormammu.

THE ME HALF OF THE EQUATION

I wasn’t 100% sold on this figure, since I already had the Allfather Series version of the character.  When I found Mordo at the store, I also found this guy, but I had planned on leaving him there for a later time.  Of course, Super Awesome Girlfriend wouldn’t stand for this and ended up buying him for me anyway.  I’m actually really happy I got this guy.  In hindsight, I’ve realized that the last Iron Fist was already pretty dated when he came out and has become even more so in the last year and a half.  Plus, this costume is more linked with the character for me, and the new choice of body is pretty solid.  Now, if only we could get a decent Luke Cage to go with him…

*Want an Iron Fist figure of your own?  He’s currently in-stock with our sponsors over at All Time Toys!  Click here to check him out!

ironfisthas4

#1107: Captain Rex

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CAPTAIN REX

STAR WARS: THE FORCE AWAKENS

rexrebels1

Ever since The Force Awakens re-launched everything, I’ve been on a pretty serious Star Wars kick, and it’s only gotten worse with all the Rogue One stuff.  One of the things I’m finally getting around to as part of said kick is watching Star Wars: Rebels.  I gotta say, I don’t know why I put it off for so long, it’s definitely a fun show.  One of the cool things about the show is how it’s connecting its predecessor Clone Wars with the Original Trilogy, by bringing in a few of Clone Wars’ original characters.  One of my personal favorites from Clone Wars was clone Captain Rex, who appears in Rebels during the second season.  I haven’t gotten to him on the show just yet, but that didn’t stop me from picking up his action figure!

THE FIGURE ITSELF

rexrebels2Captain Rex is from the towards the tail-end of the Star Wars: The Force Awakens line.  He was part of the third Desert Gear assortment, alongside Unkar Plutt and FN-2187.  This assortment technically hit back in February, but most places didn’t see it until early summer.  Rex is based on his Rebels appearance, which is a fair bit removed from his Clone Wars look, what with it being 15 years later and all.  The figure stands about 3 3/4 inches tall and has the basic 5 points of articulation we’ve come to expect from the standard 3 3/4-inch stuff.  Rex’s sculpt is unique to him, and it does an alright job translating his show design into plastic form.  I wouldn’t mind a bit more fine detailing here and there, but the overall appearance matches up pretty well.  For some reason, Rex has been sculpted with his chest puffed out bit and his neck set back.  The only way to get him to look forward is to tilt the head down as far as it will go on the ball joint, and even then he’s still sort of looking upward.  I’m not sure why they handled him that way, and it makes posing him rather difficult.  In terms of paint, Rex is certainly well executed from at technical standpoint, with most of the paintwork being rather clean.  The real issue is that he’s actually too clean.  His show design has the armor looking rather disheveled, but on the figure that’s really limited to just the bottom of his boots.  He doesn’t look terrible by any means, but he isn’t quite as cool as he could be either.  Rex includes a pair of small blaster pistols, just like the ones he carried during Clone Wars, which can be stored in the holsters on his legs.  He also has his helmet, which seems slightly oversized, but is still pretty cool.  I especially like that he still has the tally marks that he was sporting towards the end of TCW.  Lastly, Rex has a piece of the build-a-whatsit thing.  It’s a staff that fires a missile.  It’s actually not as lame as prior pieces, but still not adding much value to the figure.

THE ME HALF OF THE EQUATION

I actually picked up Rex before starting Rebels, back during the summer.  I was in upstate New York with Super Awesome Girlfriend and her aunt and uncle on an RV trip, and I found this guy at the local Walmart.  Not gonna lie, I partly bought him because he was one of the few figures there I didn’t have, and I was sort of going into withdrawal due to not having ready access to internet and being in a town with literally nowhere to buy action figures (apart from said Walmart).  That being said, I’d been intrigued by this figure since seeing his prototype at SDCC.  I’ve always had a soft spot for Rex, and I look forward to seeing him on the show. 

#1016: Nick Fury

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

NICK FURY

MARVEL LEGENDS SERIES

NickFuryMLS1

Alright, let’s keep moving steadily through Giant-Man week. Today, we go back to the comics side of things with Nick Fury. Though the general public is familiar with Samuel L Jackson’s performance from the MCU movies, Fury spent the first 38 years of his existence as a middle-aged white guy (he was also once played by David Hasslehoff, but the less said about that, the better). The SLJ Fury has gotten a couple of Marvel Legends figures from Hasbro, but it’s been a fair while since we’ve seen a figure of the original Nick. Fortunately, Nick’s one of the figures in the latest round of Marvel Legends. On to the figure!

THE FIGURE ITSELF

NickFuryMLS3Nick Fury is figure 5 in the Giant-Man Series of Marvel Legends. He’s the second of the three comic-based figures in the set. He’s a slightly odd choice, since Fury isn’t much of a player in either the comic or movie Civil War stories, but it’s not like Nick’s exactly an off-the-wall choice. The figure stands a little over 6 inches tall and he has 32 points of articulation. Fury is seen here in his classic SHIELD uniform. It’s a slightly more recent incarnation of the uniform (the color of the boots gives it away) but the changes are minimal enough that this Nick could really fit in just about anywhere. He’s built on the Bucky Cap body, which is a pretty good fit for the character. He’s got a new head, as well as add-ons for the shoulder holster, belt, glove cuffs, and thigh strap. This Fury’s head seems to go more for suave super-spy over the Toy Biz Fury’s grizzled old warrior. While I don’t mind it, and I think it may be one of Hasbro’s nicer unmasked heads, I can’t help but miss some of the character from that old sculpt. Comparing the two bodies is no contest, though: Bucky Cap is a huge improvement over the old Namor body, and all of the add-ons look really nice. It’s too bad we’re back to a permanently attached gun on the shoulder holster, but I won’t deny it looks better that way. The paintwork on Nick is all pretty solid. They’ve gone for the solid patch of grey method of handling his 5 o’clock shadow, but it doesn’t look atrocious on this figure. I quite like the SHIELD logos on the shoulders, and I really appreciate the accent work on the white parts of the uniform. Definitely some solid work from Hasbro here. Nick includes two spare heads. The first is a fully helmeted one, allowing for him to double as a generic SHIELD agent, which is much appreciated. The second (and more fun) head is Dirk Anger, Director of H.A.T.E., the Fury parody from Nextwave. Technically, Dirk should have a different uniform, but seeing as this is probably the only way he was ever going to make it into figure form, I’m hardly going to split hairs. Nick also includes a pistol (which can be holstered on his thigh) as well as the left arm of Giant-Man.

THE ME HALF OF THE EQUATION

Remember what I said in my Red Guardian review about how finding these guys in stores was happening with increasing frequency? Well, it applies here. I was out with Super Awesome Girlfriend and Tim for my birthday, and we stopped by my local TRU, which had apparently just put out a case of the Giant-Man series. Super Awesome Girlfriend insisted on getting this one for me, so here he is. I can’t say a re-done Nick was high on my wants list, but this guy turned out pretty well. Add in the Dirk Anger head, and I’d definitely call this guy a winner!

NickFuryMLS2

#1009: Castle Grayskull

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CASTLE GRAYSKULL

MASTERS OF THE UNIVERSE (2002)

Grayskull1

Playsets for action figures are by and large a thing of the past. They were really big in the ‘70s and ‘80s, and even kept up steam for a good part of the ’90s, but a general trending towards less interest in action figures coupled with rising costs of plastics has made them less than practical. Sure, you still see the occasional set here and there, but they lack the charm of the older sets. Occasionally, an attempt is made at recapturing that charm for a more collector-oriented market. A few years back, Mattel used their online store Matty Collector to get enough backers to fund a high(ish)-end version of Castle Grayskull, an important part of the He-Man mythos. This not a review of that. Nope, this is a review of its direct predecessor. Well, most of it anyway. Let’s get to the review!

THE PLAYSET ITSELF

Grayskull7Castle Grayskull was released as a deluxe playset during the first year of the 2002 Masters of the Universe line. The Castle is designed to fit with the basic 6-inch figures Mattel offered. It’s actually about half-scale. In its defense, even the much larger, much more expensive Castle Grayskull was only three-quarter-scale, and that one wasn’t even vying for valuable retail shelf space. As it is, it’s definitely undersized, but it’s large enough that it suits the purpose it was built for pretty well. The Castle is just about 20 Grayskull2inches tall and 17 inches wide. When the Castle is all folded up, it’s only about 4 inches deep. The exterior of the Castle is pretty impressively detailed, and features a very nice selection of textures, which keep it exciting. Well, for a non-mobile playset anyway. The overall look, though undersized, is a very nice translation of the Castle’s 200x design. As you can probably note from the pictures, the parapets are made up of several Grayskull3different pieces, which clip into place. They were prone to fall off, which is why my set is missing a couple of them. The Castle can unfold, which reveals the interior and increases the depth of the set to 11 inches. The interior of the Castle isn’t quite as nice as the exterior, since it has to fit inside when folded. Still, there are several very nice details, including a spot for weapon storage and even a neat little computer thingy in the corner. I also love the small, easy to overlook details, like the skull and rat on the floor in the prison cell area. For some reason, in the 2000s, toy Grayskull5companies thought that the best way to sell a playset was to work in some weird battery-operated, figure prompted gimmick. Remember the ThunderLynx bit from the Tower of Omens? Well, Castle Grayskull’s got something like that. Each of the figures in the 200x Masters line (well, at least the earlier ones) had a little…thingy imbedded in their foot, which was expressly designed to work with this set. There are several spots on the set where there’s a golden footprint. When a figure’s foot was Grayskull9moved back and forth on this spot, it would release a lever on a door, revealing differing parts of the set or activating traps. Most of them are a little weird and gimmicky, but I do quite like the one on the upper level, which swings open a door revealing a special chrome version of the power sword placed on a nice little pedestal. It’s still really gimmicky, but, c’mon! Chrome! In addition to the aforementioned chrome sword, the Castle included a flag (missing Grayskull6from mine), a big cannon sort of thing, a set of shackles, bars for a cell (also missing), a giant key (because why not?), as well as a large arsenal of weapons, of which I only have the trident. Still, that was a pretty awesome selection of extras, especially given the kind of extras we see nowadays.

THE ME HALF OF THE EQUATION

By the time of the 200x Masters line, I had aged out of playsets. Yeah, I know, it shocks me too. Aging out of toys. I was just about aged back into collecting playsets when Mattel’s collector version was released, but it was just far too hefty a price for a moderate Masters fan such as myself. Of course, this more economical set had also gone up quite a bit in price. As you might have guessed (or just have already known, for those of you who paid attention to my Teela review), the Castle was part of the big Goodwill find from several weeks back. I ended up spotting this particular set first, and upon discovering it was only $4.50, I felt like I couldn’t say no. Sure, it’s not complete, but it was also super cheap, and it’s actually a really fun set. It’s too bad I never got one when they were new!

Side Note: This set was far too large for my usual photo set-up, so this is the first item to be shot in the Auxiliary Photo Studio (aka the dining room). As it turns out, the Auxiliary Photo Studio takes two people to operate, so special thanks goes out to Super Awesome Girlfriend, who aided with most of the photos you see here!

Grayskull8

#0997: Captain Phasma

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

CAPTAIN PHASMA

STAR WARS: THE BLACK SERIES

PhasmaSmall1

With the dust very definitely settled from The Force Awakens, it does seem that people went a little crazy over Captain Phasma. She was a perfectly entertaining character, and she definitely had a cool design, but there wasn’t much more than that. Which definitely upset some people. I had no real expectations, so I wasn’t let down. I would like to see more of her in the next one, though (especially after catching up on Game of Thrones and finding out just how awesome Gwendoline Christie can be), so here’s hoping. Phasma’s gotten at least one figure in each of The Force Awakens’ many lines, with the latest being from the smaller Black Series line-up.

THE FIGURE ITSELF

PhasmaSmall2Phasma is the last of the three figures that make up the fourth series of Walmart’s exclusive 3 ¾-inch Star Wars: The Black Series. The figure stands a pretty sizeable 4 ¼ inches tall and has 26 points of articulation. Her design is quite similar to the First Order Stormtrooper, but the actual figure is a fair bit sturdier than the smaller Trooper, which is much appreciated. There’s plenty of great fine detail work (the helmet once again stands out), and the proportions are pretty nicely balanced. My only complaint is less about ther sculpt and more the way the figure was packaged: her shins are quite bowed, which makes keeping her standing quite difficult. The cape (which is a sculpted add-on) is thinner and less obstructive than the larger figure’s cape, which is good. It’s a little odd, since the aesthetics of this series so far have dictated cloth capes and such, but I can’t say I mind the sculpted piece. Like her two previous figures from Hasbro, this Phasma goes for flat silver paint, in place of the more chrome stylings of the movie. I’m still a little bummed by that, but it’s a little more acceptable on a more articulated figure such as this one. In spite of the flatter finish, the paintwork here is pretty solid. There’s a bit of bleed over on some of the black/silver changeovers, but that’s all pretty minor. Phasma is packed with her usual custom blaster, which she can hold much better than the troops she commands could hold theirs.

THE ME HALF OF THE EQUATION

As with Han and Leia, Phasma was purchased for me by Super Awesome Girlfriend. As with all the Phasmas I’ve looked at so far, I really like this one. I think the 6-inch one is still my favorite of the three versions, but this one’s still really solid, and I think she’s my favorite of the Series 4 figures!