Tag Archives: Toy Biz

#0136: Young Avengers

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

PATRIOT, IRON LAD, ASGARDIAN, & HULKLING

MARVEL LEGENDS (TOYBIZ)

Today, I’m once again venturing into the land of Toybiz’s Marvel Legends.  I’ve actually stated to dread these reviews a little because I was quite fond of these figures when they were released, but looking back at them takes away all the nostalgia.  It doesn’t help that most of them are also accompanied by a story of how difficult they were to acquire.  Some of the figures still hold up, though, and occasionally some of them even lack the frustration inducing stories.  The Young Avengers set is actually one of those.

THE FIGURES THEMSELVES

These guys were released as a boxed set during the final year of ToyBiz’s possession of the Marvel license.  They’re based on their appearance in the first issue of the original Young Avengers, which was also included with the set.

PATRIOT

First up, the effective leader of the team, Patriot.  Patriot was Eli Bradley, the grandson of Isaiah Bradley who was the “Black Captain America.”  He acquired the Super Soldier serum thanks to a blood transfusion from his grandfather.  He’s shown here in his original costume, which was patterned after Bucky’s costume.  It’s not the costume he spent the majority of his appearances in, but it’s actually my favorite of his two costumes.  Patriot stands about 6 inches tall and features 38 points of articulation.  Amazingly for a Marvel Legends sculpt, everything is actually well proportioned.  My only complaint would be that his feet are probably at tad too big, but the rest looks good.  The detail on the uniform is great, with lots of great little wrinkles and folds.  The head is also spot-on to Jim Cheung’s art on the series.  The paint work is all nicely done, with no real issues.  I do wish they had used differently colored pins for the lower knee articulation because the black actually ended up bleeding into the white plastic around it.  Patriot included the original Captain America shield and a display stand with his picture on it.  Small issues aside, Patriot’s my favorite figure in the set, in spite of being my least favorite of the characters.

IRON LAD

Ah, yes Iron Lad.  Remember how Patriot was my favorite figure and least favorite character?  Iron Lad is the exact opposite.  I loved the character, but the figure’s just eh…  Anyway, Iron Lad is actually a young Kang the Conqueror.  For those of you not in the know, Kang is one of the Avengers’ greatest adversaries.  Iron Lad found out who he was destined to become and rebelled.  The first arc of the series largely deals with the ramifications of this.  Iron Lad stands about 6 inches tall and features 30 points of articulation.  He doesn’t put his articulation to very good use, as some key points are missing, leaving him stuck in some awkward positions.  Iron Lad’s armor did have a tendency to change around a little bit, so I guess he was a bit hard to capture.  The head is great.  It looks just like the character.  Sadly, the body’s a mess.  The proportions are a mess, and the articulation is incredibly obvious.  The paint is also quite sloppy, which doesn’t do the sculpt any favors.  Iron Lad included a display stand with his picture on it.  I don’t hate this figure, but I wish it had turned out a little better.

ASGARDIAN

Next up is Asgardian, or as he’s been known in every appearance following the first arc, Wiccan.  He’s Billy Caplan, and he’s the reincarnated spirit of one of the Scarlet Witch and Vision’s deceased children.  It makes more sense in context.  Billy stands about 6 inches tall and features 35 points of articulation.  The sculpt looks pretty good, and his body sculpt is probably the best in the set.  All the proportions look about right, which is cool.  His head sculpt isn’t quite as nice as the other two, but it’s not terrible by any stretch.  The paint isn’t the best in the set, but it’s passable.  There’s a few spots with some noticeable slop, and the paint on the arms is super thick, but it doesn’t look too bad.  Asgardian included a staff and a display stand with his picture on it.

HULKING

Lastly, it’s Billy’s boyfriend Hulkling.  Hulkling is also the offspring of Kree Captain Mar-Vell and the Skrull Princess, so there’s that.  Hulkling stands closer to 7 inches and features 34 points of articulation.  The sculpt is pretty good, and super textured.  Like, there are no smooth areas on this guy.  Even his arms have a pretty cool skin texture.  The head is spot on to Jim Cheung’s drawings of the character, and all the proportions look appropriate to the character.  My only real complaint is that the hands look oddly flat, which looks a bit weird from certain angles.  Hulkling’s paint is all very well applied, with no noticeable slop, and some rather nice dry-brushing.  Hulkling includes a stand with his picture on it.

THE ME HALF OF THE EQUATION

I was very excited for this set when it was released.  I had been following the comic and was very happy to see them on display at Toy Fair that year.  I received this set form my parents for Christmas and have greatly enjoyed it since.  When I packed up my Marvel Legends a few years ago, it was amongst the very last of the items put away.  My greatest complaint about this set is that we never got the remaining members of the team.

#0127: Jean Grey

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

JEAN GREY

X-MEN MOVIE SERIES (TOYBIZ)

 

In the 90s, the 5 inch scaled ruled to toy aisle, due in no small part to ToyBiz’s gargantuan line of Marvel toys, specifically those based on the 90s mega-giant X-Men.  It looked like that was where we’d be staying for a while.  But then, the X-Men movie was released in 2000, and they were released in… 6 inch scale?  It wasn’t the first time we’d seen such a scale, but it certainly wasn’t prevalent.  Coupled with ToyBiz’s continued release of other 5 inch product, it looked like this might just be a blip on the radar.

If you’ve followed the action figure industry in recent years, you would know that the 6 inch scale was far from a blip on the radar.  It went on to become the ruling scale on the market for over ten years, which was impressive.  And a lot of its owed to the X-Men Movie line making a bold jump.  Today’s review is a two-fer, looking at both versions of Jean Grey from the line.

THE FIGURE ITSELF

Jean was released as part of the first series of the X-Men Movie Series.  She stands about 6 inches tall and has 10 points of articulation.  I feel it necessary to point out that only about 6 of those points are really useful, and even then it’s iffy, thanks to the odd cut joints and strange pose of the figure.   Anyway, the sculpt is a bit of a mixed bag.  Sculpturally, the only difference between the two figures is the hair style.  The original release had it down, the second had it up in a ponytail.   They both look fine, though the ponytail look is more accurate to the character’s appearance in the movie.  The facial sculpt is actually a pretty decent approximation of Famke Janssen.  The body’s where things start to fall apart.  It has some really nice details on the suit, with some great work on the zippers and folds and such, but the proportions of the underlying body are just weird.  The arms are too long, the waist is too thin, and her legs are in this odd sideways crouch sort of thing.  All in all, just very strange.  The paint on these two is pretty good for the time.  I think I like the work on the first release a bit more, as it looks a bit cleaner.  There is one notable change between the two on the paint front.  The second release has a black t-shirt painted on under the uniform.  Apparently, this was the main reason for the second release, as there were some complaints from a few concerned parents about the pulled down zippers and total lack of any kind of covering on the two female characters in uniform.  Honestly, it’s a perfectly reasonable point to make, and it’s actually a bit odd that they had their uniforms zipped so far down, given that Jean has hers zipped up just like her male compatriots in the film proper.  Both Jeans included an incredibly creepy mutated Senator Kelly as there only accessory.

THE ME HALF OF THE EQUATION

The first version of Jean was my second figure from the movie line.  She, along with Professor X were purchased for me by my Nana as an end of school gift.  Yeah, I had the option to get anyone in the line, and I bought a girl and a guy in a wheelchair.  I was a strange kid.  Anyway, I held onto that one for a while, and remember the controversy and subsequent rerelease of Jean, now with t-shirt and appropriate hair style.  I was happy with my first release version, and thanks to the reissue thing, it was actually quite rare.

Then, I came home one day to find that my dog had gotten into my room and pretty much destroyed my Jean figure.  The first release was fairly difficult to find at that point, so I had to settle for the reissue.  Fortunately, a few months ago, my comic book store got in a large selection of older figures loose, and the first release Jean was amongst them, allowing me to once again have the figure!

#0126: Angel – Savage Land

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ANGEL – SAVAGE LAND

MARVEL 10-INCH (TOYBIZ)

Okay, so I’m currently attempting to stay on top of work and school, while at the same time doing my best not to miss posting any updates.  As such, the next few reviews may be a bit more on the brief side.  Hope nobody is offended.  If you are…ummm…I’m sorry?

Today, I’ll be doing my second review from ToyBiz’s line of 10-inch scaled marvel figures.  For those of you who missed my previous review, quick little backstory: in the 90s, ToyBiz had a rather expansive line of 5 inch scaled Marvel stuff.  They decided to double their profits by up-scaling a bunch of the molds and releasing them as 10-inch scale.  Towards the end of this line, they actually started mixing up some of the pieces to get some new concoctions and character designs.  I’ll be looking at one of the later additions: Savage Land Angel.

THE FIGURE ITSELF

Angel was released towards the end of the line, after it had become an exclusive to KB Toys.  He stands 10 inches tall, and features 13 points of articulation.  The figure, coming from the end of the line is completely built from previously used parts.  The head comes from the second Archangel figure, released in the Invasion series of  ToyBiz’s X-Men line.  The body is reused from The Vulture, who was released as part of the 90s Spider-Man line.  The head is sensible, given that it’s the same character, but I’ve never been the biggest fan of this sculpt, with its odd expression and wide eyes.  My issues are only amplified with the larger scale and normal flesh tone coloring.  The body is an interesting choice, I suppose, but given that is was the overly armored 90s Vulture, it means that Angel is left wearing this odd armor.  The paint is a bit of a mixed bag.  The head actually has some pretty decent work, and the shading on the armor is nice, but the costume under the armor looks a bit strange.  They seem to have tried to replicate the look of the previous Savage Land Angel, with his classic costume torn up.  However, while that figure had  bare feet, that wasn’t an option, as those pieces weren’t tooled for the large scale, which means that he’s got these weird painted on boots. Which look very strange with the shorts look, like he’s perpetually that nerdy guy who wears shorts with dress shoes and socks.  It’s weird.

THE ME HALF OF THE EQUATION

I’ve mentioned before how much I enjoyed the 10 inch line, and how I practically got a new one every time I went into a KB Toys.  Not this guy.  This guy, I passed up more times than I can remember, mostly based on how damned creepy he looks.  I’ve mentioned before about the trip I took to that huge KB Toys outlet center, which had a 5-10 year back log of toys.  This guy was amongst them, and I finally decided to get him to round out my X-Men.  I still think he’s a bit odd, but, he’s not the worst thing ever.

#0124: Gambit

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

GAMBIT

MARVEL LEGENDS (TOYBIZ)

So, Happy President’s Day, I guess.  Um, I don’t really have that much in the way of presidential action figures, so I’m just gonna go ahead as if it’s any other day.  But I thought I’d point it out anyway.  Just to mess with you.

Looking back at my past reviews, I’m actually a bit shocked by how few reviews I’ve done of ToyBiz’s Marvel Legends.  For a while back there they were, like, the only line I really collected, and I’ve done quite a few reviews of DC Direct figures, which I collected about the same time, so it seems odd I haven’t really looked at any of them.  I think part of this might be that I have some bad memories of trying to track certain figures down, and part of it might be that the figures just haven’t aged all that well.  Or, I’m going by a totally randomized list, and not as many of them have popped up.  Who knows? (Well, me but that kinda ruins my intro).

So, in an effort to attempt to correct some slight oversight, I’ll be reviewing the Marvel Legends version of the X-Men’s own resident scum bag, Gambit!  Gambit isn’t as big a deal as he once was, but he was pretty big in the 90s, and even into the early 2000s, hence his place in the line.  So, let’s take a look at the figure!

THE FIGURE ITSELF

Gambit was released as part of the 4th wave of ToyBiz’s Marvel Legends line.  He stands about 6 inches tall, and he has 40 points of articulation.  The figure depicts Gambit in him classic pink/blue/black leotard and brown trench coat look that everyone thought was oh so rad in the 90s.  It’s a truly hideous design, but I can’t help but be so damned nostalgic about it, because being born in the 90s ruined me as a person.  The sculpt was pretty good at the time, but now feels like one of the more outdated sculpts in the line, with huge hands, some pretty serious monkey arms, and an overall emaciated look to him.  I think the head still holds up, with that perfect floppy Gambit hair, and the totally in character smirk.  The coat isn’t the best tailored thing ever, but it isn’t too bad, and it does somewhat mask the odd proportions of the figure.  The figure’s paint is pretty good, though it can be sloppy in some places, particularly the face, which I’ve seen have some variance from figure to figure.  I do appreciate that this is one of the only Gambit figures to give him the appropriate black sleeves with those weird pink squares, instead of just leaving them pink.  The figure had a really nice assortment of accessories that I wish I still had, including: his staff, an energy explosion with a set of cards to simulate his powers, and a base sculpted to look like a fallen Sentinel hand.  These pieces were all pretty cool, and I think I still have the stand in a box with some others, but the other two pieces are long gone.

THE ME HALF OF THE EQUATION

Believe it or not, Gambit was one of my favorite ToyBiz Legends.  I’m not really sure why, as I’m not that big a fan of the character, and the figure isn’t that amazing, but I really liked him.  I suppose coming early  in the line, he got a lot more play time than some of the later figures, and he was one of the figures in the line who you didn’t have to devote all your free time to tracking down.

He hasn’t aged amazingly well, but he’s still held up better than some of the figures, which does give a leg up.  And given Gambit’s rather quick decline in popularity, the character has yet to see any kind of rerelease in the more recent incarnations of the line, which I suppose makes this guy a bit more valuable.

#0107: Original Ghost Rider

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ORIGINAL GHOST RIDER

GHOST RIDER (TOYBIZ)

Time to take a jump back to the 90s and to ToyBiz’s powerhouse that was the 5 inch Marvel line.  Sure, they had the X-Men line, and the Spider-Man line, and they did a few waves of Hulk, Iron Man and Fantastic Four to tie in with the cartoons.  But they wanted to do more.  They wanted another character to devote a whole line to.  And seeing as it was the middle of the 90s and being oh-so-90s was the big thing to be, they needed someone who just bled 90s.  Someone who screamed “X-TREME!”  With chains, and leather jackets, and skulls!  And what do you know, Marvel had a character like that:  Ghost Rider!  And so, Ghost Rider was given his own toyline!  To ToyBiz’s credit, the Ghost Rider line is easily one of the highlights of the many toylines they produced in this time period.

Today, I’ll be looking at one of the variants of the main character from the line.

THE FIGURE ITSELF

“Original Ghost Rider” as he was dubbed was released as part of the second (and last) wave of the Ghost Rider line.  In spite of the name, he’s actually based on the second Ghost Rider, Danny Ketch, who was the main Ghost Rider at the time.  I’ll be honest, the name makes no sense.  Like, at all.  So, I’m just gonna overlook it and just review the figure on its own merits.  Ghost Rider stands just over 5 inches tall and has 13 points of articulation.  For the record, that level of articulation was phenomenal for the time, which just goes to show ToyBiz’s commitment to the line, which was odd, given there wasn’t a Ghost Rider cartoon or anything.  The sculpt on GH is actually really good.  It’s quite detailed, and it’s well-proportioned for the time.   The figure’s covered in flames, that all look to be well handled, if perrhaps a bit odd looking, give that they’re opaque.  Originally, the figure had an action feature where, when you pressed a button on his back, the front of his chest would pop open, displaying his fiery torso.  However, the chest pieces didn’t stay on very well, and I lost mine over the years, leaving my Ghost Rider with a permanently exposed chest.  That sounds awkward.  The paint is pretty good, though some stuff, like the glow in the dark gimmick on the head, leaves the paint under-detailed, which is a bit of a disservice to the sculpt.  Ghost rider was originally packaged with a set of glow in the dark chains to be clipped onto him, but child-me seems to have lost that piece.

THE ME HALF OF THE EQUATION

Ghost Rider was part of a large subset of figures that were purchased for me by my dad what a nearby comicbook store called Ageless Heroes went out of business.  The store had a large stock of the various 90s 5 inch figures, and they were being sold for quite a discount.  I know this was my go to Ghost Rider for a while, and I really thought the chest thing was pretty cool.  Of course, I only bought Ghost Rider because I felt my Champions display needed him.   Yeah, I was that kid.  And for all of you who went “who are the champions?”, go look up Marvel’s Champions.  Be amazed at my obscure references!

#0094: Spider-Man

Posted by Ethan Wilson in Reviews and tagged with , , , ,

SPIDER-MAN

MARVEL 10-INCH (TOYBIZ)

In the 90s, ToyBiz’s 5 inch Marvel line was pretty unbeatable when it came to superhero toys.  They had wide variety and best assortment of articulation you could find at the time.  Having met a great success with the 5 inch line, ToyBiz decided to release a larger scale line through a partnership with toy store KB Toys.  The 10 inch line was made from sized-up molds from the popular 5 inch line, and offered a variety of characters at a low price.  They were also a bit more durable than the smaller figures, which made them great for play.  Today, I’ll be looking at the basic Spider-Man from the line.

THE FIGURE ITSELF

Spider-Man was part of KB’s exclusive line of 10-inch figures, though the line never really had “waves” or “series.”  Instead, the figures were just kind of in constant supply.  Anyway, this was the basic Spider-Man, who was offered for the entirety of the line.  The figure stands 10 inches tall and has 9 points of articulation.  The sculpt quite simplistic, but fairly well handled, especially given it would have been released in the 90s.  The web lines are painted instead of sculpted, but that was the standard at the time, and it does make the figure look like he’s from the 90s Spider-Man Animated Series, which was undoubtedly an influence.  For the most part, the figure is molded in the appropriate colors, but there are a few painted spots.  The color matching is good, and everything looks clean, with no smudges or slop.  I believe that this figure included a web-line with a suction cup, but I’ve long since lost it.

THE ME HALF OF THE EQUATION

This guy was purchased on one of the many trips taken to the nearby, mall-based KB Toys with my Grandmother.  She would occasionally buy me one or two of these figures and I would joyfully take them home to play.

#0075: Luke Cage

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

LUKE CAGE

MARVEL LEGENDS (TOY BIZ)

Today, it’s my second look at the early 2000s juggernaut, Marvel Legends.  I’ve mentioned in the past my issues with this line’s tendency to draw out the worst in the collector market, but the figure’s themselves weren’t always bad.  I’ll be looking at one of the figure’s from towards the end of Toy Biz’s run with the line: Luke Cage, sometimes known as Power Man.  Sweet Christmas!

Luke Cage was a character created in the 70s to somewhat tie-in to the trend of “blaxplotation” movies.  Marvel wanted to try and appeal to that market, so they created Luke Cage, Hero for Hire.  He starred in his own series for a while, that was very 70s.  When his own series started to suffer, he was rolled in with fellow 70s character Iron Fist.  It was here that the two characters found their audience, and it’s how they’re often remembered.  When the 70s passed, Cage fell into obscurity, but he came into a bit of a revival in the last few years, and is set to appear in his own Netflix-original miniseries in 2015.

THE FIGURE ITSELF

Luke Cage was released as part of the 14th Series of ToyBiz’s Marvel Legends line.  He’s a little bit over 6 inches tall, and he has 35 points of articulation.  The figure depicts Luke in his original yellow and black look.  It’s incredibly dated, but given that the character seems to just where normal clothes these days, this is the most interesting look the character’s had.  Luke’s sculpt isn’t too bad.  The body sculpt is one of the better ones that the line had to offer.  It doesn’t have some of the stranger proportions that plagued the line, although his super articulation does make some parts of the sculpt look a little…off.  The head looks fine, if a bit on the angry side.  Most of the figure is molded in the proper color, but there’s some nice accent work done to bring out the sculpt’s details.  Cage included a piece of Series 14’s Build-A-Figure Mojo, and a copy of his first appearance.

THE ME HALF OF THE EQUATION

In my last review of a Marvel Legends figure, I lamented how difficult it was to get a hold of the figures.  Well, but the last two series or so of the line, this was less the case, so I had no real issues getting Luke here.

#0055: Angel – Savage Land

Posted by Ethan Wilson in Reviews and tagged with , , , ,

ANGEL – SAVAGE LAND

X-MEN (TOYBIZ)

The 90s X-Men line!  Now there was a line.  I haven’t really looked at this line yet on the site, aside from the Original Members Boxed Set, which wasn’t actually part of the line.  But in the 90s, the X-Men were the big thing.  They had a TV show, their comics sold millions, and they had one of the most comprehensive toy lines to date.  There was a Cho’d action figure for God’s sake!  Towards the end of the line, they began to run out of new characters to release, so they started doing these theme waves with rereleases of the main characters.  One of those theme waves was a set of figures based on the X-Men’s many trips to the Savage Land.  It featured figures of the X-Men in tattered “Savage Land” uniforms.  Today, I’ll be looking at the Angel figure from that line.

THE FIGURE ITSELF

So, as I said above, Angel here hails from the Savage Land series of Toybiz’s 5-inch X-Men line.  He stands roughly 5 inches tall and has 11 points of articulation.  If you read the review of the Fallen, you’ve seen a lot of this figure before.   He shares all but his head, arms and feet with that figure.  The head was actually one that saw frequent reuse over at Toybiz, and I know this wasn’t the first figure to use it, but I honestly don’t know what was.   Anyway, it works fine here, though it might be a bit scowly for a pre-Archangel Warren Worthington.  The figure’s look is mostly done through paint, which depicts a tattered version of Angel’s blue and white costume from the silver age*.   It’s cool to see this costume here, but a bit disappointing that the costume never got a proper release.  Angel at one point featured a pair of (very small) wings, a gray vest with an X-logo, and some weird claw thing that attached to his wrist, but I lost most of those pieces many years ago.

THE ME HALF OF THE EQUATION

I got this figure on one of my many trips the KB Toys outlet in Rehobeth Beach.  I was very excited to get it because Angel figures were a bit of a rarity in the 90s.  I know I really liked this guy, and for reasons I can’t fathom at this point, I know he spent a lot of time in my Ghostbusters Ecto-1.

*In super hero -comics, the first 40 years or so are divided into three “ages”:  The Golden Age, The Silver Age, and the Bronze Age.  The Sliver age, at Marvel any way, is believed to start with Fantastic Four #1, and end somewhere around Giant Size X-Men #1.

Read the Flashback Friday Figure Addendum here!

And there’s a second one here!

#0040: Ultron

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

ULTRON

AVENGERS:  UNITED THEY STAND (TOY BIZ)

Ah, yes, Avengers: United They Stand.  Poor A:UTS. it gets a lot of hate and I’m not certain it deserves it.  Perhaps it wasn’t the greatest depiction of the Avengers to grace the small screen(That honor goes to the more recent Earth’s Mightiest Heroes), but I didn’t think it was all that bad.  The designs and animation may be late 90s over complication at its finest, but I thought the characterization was actually nicely done, and I loved the fact that the focus was on the slightly lesser known Avengers instead of Cap, Iron Man, and Thor.  One of my other favorite things was the tie-in toyline, which is what I’ll look at today.  In particular, the toy counterpart of the shows recurring antagonist: Ultron!  This isn’t the first time Ultron’s been mentioned on this blog.  I previously mentioned him in passing in my Vision review, where I mentioned Ultron was the creator of Vision.  Ultron himself was the creation of Avengers founding member Hank Pym, aka Ant-Man, aka Giant-Man, aka Goliath, aka Yellow Jacket, aka Wasp, aka Dude with serious identity issues!  Ultron rebelled on his creator and became a powerful Avengers foe.  He’s also set to be the villain in the upcoming Avengers sequel.

THE FIGURE ITSELF

Ultron was released as part of the first wave of Toy Biz’s Avengers:United They Stand tie-in line.  Ultron had several different looks over the course of the show, but this one seems to be a bit of an amalgam of the various looks, with the largest portion of influence coming from his appearance in the show’s first two episodes.   He stands just over 5 inches tall, and features 11 points of articulation (13 if you count the moving knee-pads).  Ultron is a completely new sculpt.  It’s well done, and quite detailed, especially for its time of release.  In particular, the head really captures the look of the character.  The paint is pretty well done, being mostly all one color; a nice bluish silver.  There’s a wash over the whole figure to help bring out the details.  The figure also features a light-up feature.  By pressing the button on Ultron’s waist, you could make the figure’s eyes and mouth light up.  It’s a neat feature that helps to further simulate the look of the character from the show and comics.  At one point, Ultron had a large cannon that hooked onto his right arm, but I’ve since lost that piece.

THE ME HALF OF THE EQUATION

My dad bought Ultron for me when he was initially released.  We happened to stop at a Toys R Us and there he was.  He was one of the last figures I acquired from the line.  It wasn’t because I didn’t want one, but because the A:UTS figures were quite difficult to find initially, so I kind of got them when I saw them.  Growing up, he was the closest thing I had to a classic Ultron.  Because of that, I have quite the soft spot for him.

Read the Flashback Friday Figure Addendum here!

#0030: The Fallen

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

THE FALLEN

MUTANT X (TOY BIZ)

Ah, Mutant X.  Man, that was such a 90s comicbook.  One that I enjoyed immensely!  Diamond Comics’ catalogue Previews offered figures of four members of the books main team “The Six”(No, I don’t really know why they didn’t offer all six.  Seems a little odd, doesn’t it.  It’s like only releasing  three of the Fantastic Four!).  Being a fan of the comic and a fan of action figures, particularly 90s Marvel figures, I of course wound up with a set.  Today, I’ll be looking at The Fallen, who was an alternate universe version of Warren Worthington III, aka Archangel.

THE FIGURE ITSELF

The Fallen stands about 5 inches tall, and has 13 points of articulation.  He also had his signature wings, which could be snapped onto his back, and were made of a soft translucent green material, with wire running through to allow them to be posed.  The wires honestly didn’t offer much poseability, but it’s the thought that counts, I suppose.  Fallen also included an X-Logo shaped stand, which is good, because he can’t stand without it due to his top heavy nature.

THE ME HALF OF THE EQUATION

Fallen, along with the other figures from the Mutant X line, was a Christmas gift from my parents.  I recall being fairly excited to open him, as he was my favorite character from the series.  Yay!