Monthly Archives: June 2014

#0229: Green Goblin

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

GREEN GOBLIN

SPIDER-MAN: THE MOVIE (TOYBIZ)

 

The first Spider-Man movie may have been surpassed by other superhero movies in recent years, but when it was released it was my favorite superhero movie, and remained in that spot until it was dislodged by its sequel. The movie was also one of the earliest comicbook based movies to get a decent tie-in toyline, on par with, and perhaps even better than the comic stuff at the time. I’m certain it surprises no one that I owned a few of the figures from that toyline, and today I’ll be looking at one of the figures of the film’s big bad, the Green Goblin.

THE FIGURE ITSELF

The Goblin was part of the first series of Spider-Man movie figures. The figure stands 6 inches tall and features 38 points of articulation. He has an all new sculpt based on Willem Dafoe’s performance as the character in the film. It’s a pretty good sculpt and, whether you like the suit or not, it’s a good representation of the suit’s design. Under the figure’s removable mask is an unmasked Norman Osborn head, which bares more than a passing resemblance to Dafoe. The resemblance might be a bit closer were it not for the slick back hair style, but it was necessary in order to facilitate the removable mask feature. The mask is a well done piece and is essentially a scaled down version of the real thing, though it is missing the backing it had in the movie. This is once again to aid the removability. The paintwork is cleanly applied, with no real issues with slop or bleed over. His skin tone is a tad too yellow for my tastes, but only a tad. The figure came packaged with his goblin glider and a flight stand, but both of mine have been lost. Sorry! (EDIT: Okay, not quite…)

THE ME HALF OF THE EQUATION

I got Green Goblin from the KB Toys in my local mall shortly after the first series was released. That would have been a few months before the release of the movie. For some reason, I wanted Green Goblin, but none of the other figures in the series. So, I only had the Goblin for a while. He’s a quality figure for sure, but that goblin costume looks worse every time I see it.

#0228: MSA-003 Nemo

Posted by Ethan Wilson in Reviews and tagged with , , ,

MSA-003 NEMO

HG GUNDAM HGUC

Nemo

And now for something completely different. Previous reviews on the site have been based on finished action figures, purchased by me, fully assembled elsewhere, in processes unknown to me. Not today. No, today, I’ll be taking a look at a figure I built all by myself. Well, not all by myself. There were instructions, and the basic parts were supplied for me. But, I did most of the heavy lifting this time.

Today’s figure comes from Bandai’s line of Gundam model kits. They’re based on designs from the various Gundam anime and manga, and are made up a large assortment of pieces that can be snapped together to form a fully functioning action figure.

THE FIGURE ITSELF

Nemo3The figure I’m looking at is the MSA-003 Nemo, which is apparently a “massed-produced mobile fighting suit.” From what I can tell, it’s an army builder. Anyway, Nemo is figure #150 in Bandai’s HG GUNDAM HGUC model line (I think I got all that right, but it’s a bit difficult to tell with most of the info on the box being in Japanese.) The figure is in 1/144 scale, which means he stands about 5 inches tall. He also features 35 points of articulation, which is certainly impressive for a model. From what I’ve been able to find online, the sculpt looks pretty faithful to the Nemo design, which is a good thing. It’s a nice and clean sculpt, with some pretty great details worked in. Above all, all of the pieces fit together pretty much perfectly, which is the most important part of the kit. The figure features no actual paint work, though it makes use of parts molded in five different colors in order to give the figure the proper color scheme. What can’t be feasibly handled with a solid molded piece is handled via decal. The decals go on without too much trouble (though I did have to put out the tweezers), and stay in place very well. Perhaps my favorite part of the figure is the combination of a silver decal and a piece of translucent orange plastic in order to create Nemo’s visor. It really gives it a great amount of dimension. Amazingly for a model kit, Nemo also includes five interchangeable hands, two beam swords, a machine gun, and a shield. All of these pieces can be used to great effect and offer a lot of variety in display choices.

THE ME HALF OF THE EQUATION

I picked up Nemo from a local hobby store while on a trip there with my Dad. I’ve never been much of a Gundam fan, but I saw Nemo amongst the assortment of kits they had and he just called to me. I liked the color scheme, and I’m a sucker for a cool robot design. I had heard of the Gundam kits, but I didn’t actually have any experience with them. I figured I’d give this one a shot, and I’m glad I did. Putting this figure together was quite a lot of fun, and I really enjoyed getting the insights on how such a figure is assembled. And, at the end of it all, I get an awesome robot dude that’s fully poseable! How cool is that?

Nemo2

#0227: Boomerang – Deadliest Foes

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BOOMERANG – DEADLIEST FOES

MARVEL LEGENDS INFINITE SERIES

Boomerang

I’m almost done with my recent round of Marvel Legends reviews. One more to go, and then I’ll be jumping back to the usual retrospective reviews. This one doesn’t come from Captain America: The Winter Soldier set, but its sister Spider-Man line. It’s based on Boomerang, one of Spider-Man’s lesser known foes, and one of my personal favorites. For more on Boomerang, head here. Let’s take a look at the figure!

THE FIGURE ITSELF

Boomerang is a part of the Amazing Spider-Man 2 Marvel Legends Infinite Series. Officially, he’s referred to as “Deadliest Foes,” and is shipping in the second wave of the series, as a replacement for the initially shipped Beetle figure. The figure stands about 6 inches tall and features 32 points of articulation. He’s based on Boomerang’s more recent redesign from his stint as a member of the Thunderbolts, and most recently his starring role in Superior Foes of Spider-Man. I know there’s been some contention over the decision to use the redesign instead of his classic design, but I actually am happy with the choice. The new design is actually quite striking. The figure is built on the basic male body, that same one used for Baron Zemo, flared boots and gloves and all. Interestingly, the prototype on the box features painted on boots and gloves. I think I like the final product more. The base body is quite a nice starting point, and the head sculpt is also a solid piece of work. I’m not 100% in favor of the gritted teeth look, but it’s not terrible, and it doesn’t look as bad as other attempts at such an expression. And it does add a lot of character to the figure. In what seems to be a running theme for all of my Hasbro reviews, a great sculpt is let down by bad paint. It’s less an issue with slop/bleed over and more an issue with consistency of application. The white areas of the paint seem to need another coat, and the head paint seems exceedingly…gloppy. It’s almost like they dabbed the paint on. Really weird looking, and certainly disappointing. The figure includes a “backpack,” four boomerangs of two different sizes which can be stored in the backpack, and the left leg of Ultimate Green Goblin, the series’ Build-A-Figure.

Boomerang2 Boomerang3

THE ME HALF OF THE EQUATION

I picked up Boomerang on Amazon, once his price had stabilized to essentially retail. The figure leaves me feeling very mixed. I’m glad to have a Boomerang figure, and it’s a great sculpt, but the paint leaves quite a bit to be desired. I really want to support Hasbro in their attempts to do good with this line, and they do really seem to be trying, but the paint apps on this figure and the Mandroid are really, really bad. It holds both figures back from being as good as they should be, and I’m certain it’ll end up turning people off of the line, especially with the ever increasing price-point.

Action Figures For the Questioning #011: Display Stands

Posted by Ethan Wilson in Action Figures For the Questioning

I’ve been in the action figure world for about 20 years.  So, it’s safe to say I’ve got a fair bit of knowledge on the terms that tend to be thrown around by collectors with little or no explanation as to what they mean.  I generally try to explain a concept on its first appearance on this site, but much as Stan Lee once said to assume every comic book was somebody’s first, I too must assume that every review on this site might be the first to be read by a new visitor.  As such, I’ve decided to put together a guide to some of the more frequently used terms and names that might show up.

DISPLAY STAND

DisplayStand

What is it?:

A stand meant to aid a figure in remaining vertical.  More often than not, designed to be innocuous and small, but can also be large and obtrusive.  Mostly seen with more collector oriented lines.

Example:

Recent releases of Minimates include a small clear stand.

#0226: Mandroid

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

MANDROID

MARVEL LEGENDS INFINITE SERIES

Mandroid

I think I’ve probably said all I can about the awesomeness that is Captain America: The Winter Soldier. If you still haven’t seen it or don’t agree, there’s probably no helping you at this point. You’re just doing it wrong. If you’ve been following the site, you know I just picked up Hasbro’s most recent set of Marvel Legends, meant to coincide with the film. I’ve been pretty happy with them so far, and I was definitely for the line’s Build-A-Figure, based on the Mandroid. Quick sum up on the Mandroid: it’s battle armor worn by certain SHIELD Agents in big battles with super-humans. It’s super cool. Let’s see how the figure fairs, shall we?

THE FIGURE ITSELF

The Mandroid was released as the Build-A-Figure for the Captain America: The Winter Soldier Marvel Legends Infinite Series line, with pieces packed with six (technically eight, with the swap figures) figures over the course of two series of the line. The figure stands about 7 inches tall and features 28 points of articulation (29 if you count the mounted gun). The Mandroid seems to be loosely based on the classic Mandroid design, with a movie-style flair added to it. It’s a strong enough design, but I wouldn’t mind seeing it in the more proper gold color scheme somewhere down the line. The figure makes use of the Iron Man 3 Marvel Legends Iron Monger Build-A-Figure’s legs and lower torso, as well as slightly tweaked versions of that figure’s arms, all coupled with a brand new head and upper torso. The re-use all works well for the design, and seems to fit pretty seamlessly with the new parts. The newer pieces look pretty spot on to the classic Mandroid design. As seems to be a running theme with this series, the figure’s sculpt is let down a bit by the paint application. The figure is mostly molded in the appropriate silver, so there are no issues with those parts, but the black paint shows a few areas of bleed over, and the yellow paint is just plain messy. The visor on the head has serious amounts of bleed over on the outlying areas. The left arm gets it the worst, with the yellow bits barely even lining up with the sculpted lines they’re meant to follow, plus a general inconsistent coating, and random blotches of yellow in incorrect places all over the arm to boot! Fortunately, the yellow is a rather minor part of the figure, and most of the offending areas aren’t oft seen, but the visor is utterly inexcusable. The sculpt of the figure is impressive enough that I’m willing to overlook the paint, but the figure could have been so much more impressive if they had been a bit more careful.

THE ME HALF OF THE EQUATION

If you’ve been following my previous reviews of the CA:TWSMLIS line, then you pretty much know how I acquired this figure. It’s not terribly exciting, but it did lead to me picking up some figures I wouldn’t have otherwise in order to get Mandroid pieces. So, was it worth it? Well, there are some serious issues with the figure’s paint, which really let me down, but overall, I’d have to say yes, the figure was worth the extra purchases. The Mandroid is a cool design, regardless of the issues the figure faces, and the excess figures were overall acceptable. Honestly, this is probably the happiest I’ve been with a full set of figures in a fair bit of time!

Cap&Mandroid