Monthly Archives: May 2015

#0558: Hobgoblin

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

HOBGOBLIN

MARVEL LEGENDS INFINITE SERIES

HobML1

Oooookay, after a two-week hiatus, I am finally going to finish up those Marvel Legends Infinite Series reviews I started a month ago. So, if you’ve been patiently awaiting my Hobgoblin review that I totally put off for way too long, then you’re in luck dear reader! When we last left our legendary friends of the infinite variety, I had just looked at Spider-Girl, the last single release figure in the latest set of Amazing Spider-Man Marvel Legends Infinite Series figures. I noted that she was a “legacy” character of sorts. Well, so is today’s figure, in a roundabout sort of a way. In fact, he’s an exponential legacy. See, this Hobgoblin is Phil Urich, nephew of longtime Spider-Man and Daredevil supporting cast member Ben Urich. Phil began his career as the fourth person to take on the mantle of the Green Goblin (and was actually a heroic character).  In the last few years, he took over the mantle of Hobgoblin, which is itself a sort of a legacy of the Green Goblin title. This dude’s got a serious legacy thing going on, is what I’m getting at here.

THE FIGURE ITSELF

HobML2Hobgoblin is the Build-A-figure for the second series of the Amazing Spider-Man Marvel Legends Infinite Series. Like the last BaF I looked at, Thanos, this is Phil’s first entrance into the world of Marvel Legends. In fact, this is actually the first time Phil’s gotten an action figure at all, so that’s actually pretty neat. Hobgoblin is roughly 6 inches tall and has 30 points of articulation. The figure is based on Phil’s second Hobgoblin design, after he tweaked the one he stole to his own needs.  The design is rather unique, so the figure, somewhat unsurprisingly, features a sculpt that is original to said figure. The figure starts out with a base body, which features some add-on work for the wings/harness, hood, and belt/skirt. Overall, it’s a very good sculpt, though it isn’t without a few faults. Let’s start with doesn’t work. The biggest issue at hand here is the figure’s torso. Simply put, it’s just weirdly shaped. Exactly what is supposed to be folds of cloth and what is underlying musculature is really hard to tell in some spots. Also, the figure’s shoulders seem to be just a touch too broad. Fortunately, both of these issues are more or less masked by the harness for the wings, so they can be pretty easily overlooked. On the plus side, the rest of the sculpt does a pretty fantastic job of translating Humberto Ramos’s drawings of the character. The head is definitely the best part. It’s rather stylized, but that really works for this particular character, and it’s full of tons of great detail, from the pointy ears to the crooked teeth. However, what’s really cool about this sculpt are the seemingly overlookable details, such as the boots, which are just as well handled as the head, and really help to make the figure work. The figure’s paintwork is generally pretty decently handled. The colors are all pretty good matches for the ones seen in the comics, and everything is pretty cleanly applied, with no slop or bleed over. The metallic blue of the boots does an effective job of making them stand out, and there is a decent amount of work done to bring out the details of the sculpt. It’s a rare thing for Build-A-Figures to get accessories, being accessories themselves, but Hobgoblin actually has two! He has a pumpkin bomb and a flaming sword. The figure has a little difficulty holding them, but they are both nicely sculpted and accurate to the source material.

THE ME HALF OF THE EQUATION

So, do you by any chance remember where I said I got the rest of this series of figures? You may have missed it, since I only said it like 13 times, but I picked up this whole series (and the Thanos series too) from Big Bad Toy Store. Phil Urich took over the Hobgoblin identity right as I started reading Spider-Man on a regular basis, so I definitely have an attachment to the character and I was very much looking forward to building the figure. He isn’t without his flaws, but they are rather minor, and he’s really a fun figure that translates the source material very well. I’m very happy to have gotten him. (and it’s also nice that I liked most of the figures I had to buy to get him!)

HobML3

#0557: Iron Man vs. Ultron

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

ULTRON PRIME, IRON MAN, & ULTRON – MARK 1

AVENGERS: AGE OF ULTRON

IMvsUltron1

Happy Free Comic Book Day everyone! Yes it’s that joyous time of year where we all go to pick from a small selection of pre-determined free comics and we get to hear the inevitable stories about less informed people attempting to wander out of the store with hundreds of dollars-worth of comics. Yay?

So, the official countdown to Avengers: Age of Ultron ended yesterday, but fear not, the Ultron fun isn’t done just yet! I’ve looked at (almost) all of the comic-based Ultron figures. Now we start getting into the movie-based stuff. I’ve already looked at some of the Marvel Legends that were released to tie-in with the movie, and I’ll be taking a look at the first series of Minimates in a week or so. Today, I’ll be taking my first look at Hasbro’s line of 3 ¾ inch figures from the film, with two versions of the titular villain and an Iron Man thrown in for good measure.

THE FIGURES THEMSELVES

This trio of figures was released as a Target-exclusive “Iron Man vs. Ultron”’ three-pack, which is part of Hasbro’s wider Avengers: Age of Ultron line. The figures were released just prior to the film. Iron Man and Ultron Prime are repaints of their single releases (though Ultron Prime hasn’t actually hit retail yet) and Ultron Mark 1 is, for now anyway, exclusive to this set.

ULTRON PRIME

IMvsUltron2Ultron Prime here is Ultron’s main appearance from the film. The figure is just shy of 4 inches in height and features 5 points of articulation. That presents some issues. The limited articulation is an issue to be sure, but the real issue here is that he’s just too short. In the movie, Ultron was somewhere around 8 feet tall. To be properly in scale with the rest of the figures, he should actually be over 5 inches tall. In its current state, the figure ends up being woefully small. Moving past the scale issue, let’s just look at the figure on its own merits. The figure’s sculpt is new (though it will see another use fairly shortly on the regular Ultron Prime), and, obviously, it’s based on Ultron’s final film appearance. The sculpt is okay, though I certainly wouldn’t call it perfect. The details are mostly well placed and seem fairly accurate to the source, but the sculpt seems a little bit soft. In addition, it feels as if the figure has been stretched to add some height, resulting in a rather thin figure. Couple that with the figure’s short stature and you have a rather dinky, unimposing Ultron. Paintwork doesn’t do much to help this figure, either. He’s mostly just molded in a dark, brownish grey. It’s not metallic or anything, and it’s certainly too dark. His arms are molded in a translucent red, with some paint thrown in to make the switch from grey to red gradual. Some metallic sheen shows up there, and there is some pretty decent work. The red for the eyes and the detail on the torso is also pretty decently applied, and it breaks up some of the monotony of the grey. Ultron includes a blast effect piece, molded in red, which can be placed on either of the figure’s hands.

IRON MAN

IMvsUltron3Here we have the set’s requisite heavy-hitter, Iron Man. He’s represented here in his Mark 43 armor from the movie, which is the same armor we saw in the Marvel Legends assortment as well. The figure is about 3 ¾ inches tall and has the same 5 points of articulation as Ultron Prime. Structurally, this figure is identical to the Iron Man figure from the first series of single release figures. It’s actually a fairly decent sculpt. The proportions are pretty spot on, it’s accurate to the armor from the film, and it has a more than passable amount of detail work. All-in-all, a good sculpt. Paint; here’s what sets this figure apart from the single release. The single release was rather disappointing, with only the most basic color placement and a lot of “broad strokes” work. Here, the paint is actually very nicely handled. Everything is pretty clean, with no slop or bleed over. All of the parts that should be red are red and all of the parts that should be gold are gold. There are even a few spots of silver thrown in for good measure. The end result is a paint job that accents the sculpt rather nicely. Iron Man includes a blast piece molded in blue.

ULTRON – MARK 1

IMvsUltron4Look! Another Ultron! It’s like a sandwich or something. This Ultron is, as noted by the name, the first version of the character we see on screen. Rather than being specifically designed to be Ultron, he’s constructed from the remains of several of the Iron Legion drones. It’s a look that figured pretty prominently into the early trailers for the film, delivering the distinctive “strings” speech, so it got a fair bit of notice. The figure is about 3 ¾ inches tall and has 5 points of articulation, just like the other two in this set. Though he may be built from Iron Legion drones in the film, this Ultron figure features a sculpt that is wholly unique to him. And what a sculpt it is! This figure features a ton of texture and detailing, all throughout. The inner workings of his body are all nicely defined, and all of the armor plating is scratched and dented, giving it a nice touch of realism. The head is probably a little too large, especially when compared to the Iron Man included, but it’s minor, and the sculpt of the head is fantastic on its own. The figure is also sculpted with his legs in a bit of a step, giving him the appearance of a limp, like the one he has in the film. It’s a nice change from the standard standing pose of the rest of the figures, but it isn’t so extreme that it takes away from the figure. Ultron Mark 1 probably has the best paintwork in the set. It could probably stand to be a little more detailed, especially on the grey parts (some metallic grey plastic would have gone a long way in this set), But there are some nice touches, and he has enough different colors to make him a bit more visually interesting than the others. On top of all that, the paint is nice and clean and there isn’t any real slop or bleed over to speak of, which is always a plus. Ultron Mark 1 includes no accessories of his own, though I suppose you could give him one of the other two’s blast pieces if you really wanted to.

THE ME HALF OF THE EQUATION

I actually stumbled upon this set pretty much completely by accident. I just happened to find a rack of them at my local Target, while I was looking to see if the second series of singles had shown up yet. I hadn’t seen any news about this set, so its existence was new to me. That’s a rarity for me nowadays, so it was a fun little find. I’m still not totally sold on Hasbro’s move to the more simplistic figures for this scale. After years of fully articulated figures, the move back to the basic 5 hurts more than a little bit. Ultron Prime is easily this set’s weak point; there are just too many things against him, and the fact that he’s not even a “default” version of the design doesn’t help. However, Ultron Mark 1 is a fun figure, and more than makes up for the failures of his more advanced counterpart. The lower articulation is much more forgivable here, and the sculpt is just far superior. Add in an Iron Man that is easily the best version available in the line right now, and you’ve actually got a pretty decent set. If we can get more figures like those two and less like Ultron Prime, my opinion of the line would definitely improve.

IMvsUltron5

#0556: Ultron

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ULTRON

MARVEL LEGENDS (HASBRO)

UltronMLH1

Countdown to Avengers: Age of Ultron: IT’S HEEEEEEEERRRREEE!!!!!!!

Hey guys! Hey guys! Hey guys! Do you know what got released today? AVENGERS: AGE OF ULTRON!!!!!!!! *ahem* Okay. I think I got it out of my system. Sorry. I’m just a teeny bit excited.

So, yes, Age of Ultron is out today. By the time you read this, I’ll have already been to see it once at a Thursday showing, and I’ll be prepping to see it again later today. Because I’m insane. Anyway, I’ll be wrapping up my countdown to the movie with one last look at my Ultron collection. This time, it’s a return to the Marvel Legends style. That didn’t go so great last time, but I think Hasbro can turn it around. Let’s look!

THE FIGURE ITSELF

UltronMLH2Ultron was released as part of Series 2 of the Iron Man 3 Marvel Legends line. He was the only of the three figures in this series to be comic-based (because, no, Ultron wasn’t in Iron Man 3. I would have noticed), and the only figure in the entire line not to be specifically Iron Man-based. The figure stands just over 6 inches tall and he has 34 points of articulation. Sculpturally, this Ultron marks the first time the character hasn’t gotten his own unique body sculpt (not counting the Minimate, of course). He’s constructed using the body of Titanium Man from the Iron Man: Armored Avenger line, along with a new head and shoulder-pads. Titanium Man’s body is a decent enough starting point. It’s well enough articulated, and it certainly has plenty of clean, sculpted detail work. It isn’t really a match for any of Ultron’s designs, but given the fluidity of his body design, that isn’t an inherently bad thing. The shoulder armor is fairly straight-forward. They’re decently sculpted, and the fit the aesthetics of the rest of the body well-enough. In a startling change from the first few Ultrons I looked at, the head is definitely this figure’s strongest point. It’s not quite the expert piece we saw on the Marvel Select figure, but it’s still a pretty great translation of the classic Ultron design to three dimensions. The details are all pretty clean, and symmetrical (important for a robot) and there’s definitely a machined quality to it. And I can’t stress enough how nice it is to see that they’ve gotten the antennae correct. That’s a key detail. It’s also worth noting that the head fits with the rest of the body very nicely, stylistically, which is always a good thing. Ultron is actually pretty simple on the paint front. Mostly, he’s just molded in silver, with a little bit of red paint for the eyes, mouth, and… uhh… shoulder-pad circles as well as a little bit of blue shading on the silver,. The silver is fine, though maybe a little too light (in contrast to the MU figure being too dark) and it has the common “swirly plastic” look that metallic colors can sometimes get. The blue accents look really nice, but they are just a bit inconsistent. It isn’t super noticeable, but it can be the slightest bit jarring. The red paint is cleanly applied, and it’s nice and solid. Some sort of variance or energy pattern would have been cool, but it certainly doesn’t look bad. Ultron included no accessories of his own, although he did include a piece of Iron Monger.

THE ME HALF OF THE EQUATION

After taking a bit of a break from Marvel Legends, I was finally pulled back in by last week’s Neo-Classic Iron Man. This figure was announced not long after I got that one, and I was definitely excited to get it. I’ve been waiting for a more proper Ultron ever since the disappointment that was the ToyBiz version. Ultimately, this figure had its thunder stolen a little bit by the MS Ultron, who provided a more faithful classic Ultron, but that actually doesn’t ruin this guy for me. He’s a fun update on the character that still manages to stay true to the spirit. Plus, he’s just a heck of a lot of fun!