Monthly Archives: April 2025

#3844: VF-1S Veritech – Roy Fokker

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

VF-1S VERITECH — ROY FOKKER

ROBO DOU (THREE ZERO)

Before today, you could count the Robotech reviews here on the site on one hand.  But now, you can’t!  …you know, because there were five, and this brings it up to six.  Do you get it?  Do you get the joke?  Well, I do, and that’s the most important thing.  As I’ve brought up in, I think, all of my Robotech reviews, I’m rather a late convert to the show, only actually watching it within the last decade.  So, there’s a fair bit of catching up to do, but also I try not to go to crazy and space it out a bit.  Given it’s been three years since my last review, I guess I’m doing alright with that spacing out, huh?  Three Zero has started doing some Robotech stuff in their Robo Dou line, and I do like Three Zero’s work, so I’m checking one of those out today!

THE FIGURE ITSELF

The VF-1S Veritech — Roy Fokker is part of Three Zero’s Robo Dou line, which handles mechas and robots from a number of different anime properties.  This one follows up on the release of Rick’s Veritech from….2023, I think?  There was a bit of a gap.  Roy’s Veritech just started hitting in the last month or so.  The figure ships in Battloid mode, which is the main look that everyone actually likes.  Well, it’s the main look that *I* actually like, and for the purposes of this site, I’m everyone.  In said mode, the figure is about 8 3/4 inches tall and has 29 workable points of articulation.  It compares well to other Three Zero mech stuff I’ve messed with in terms of articulation and build.  You can get good poses out of him without too much trouble.  The hips can be a little bit finicky, especially the first time you use them.  On my figure, I wound up hitting the folded up wings, and it popped some parts of the torso out of place, which was a bit tricky to get back in order.  But, once I did, everything stayed pretty securely together.  Like the other Three Zero mechs I’ve looked at, this figure is a mix of plastic and die-cast construction.  He’s got quite a bit of heft to him, while also still maintaining a sharp level of detailing.  The color work here is quite impressively handled.  All the base work is very clean, and he’s also got panel lining to really help sell the sharpness of the sculpt.  There’s also a ton of smaller printed details, which show a tremendous attention to detail.  The Veritech is packed with four pairs of hands (weapon holding, flat, open gesture, and fists), a GU11 rifle, and a display stand.  It also includes four sets of missiles, an antenna, and an alternate mount for the base, all meant to work with the figure’s alternate modes.

Let’s talk about said alternate modes!  As with all transforming Veritechs, you get the main Battloid mode, the Guardian mode, and the Fighter mode.  To get from Battloid to Fighter (robot to jet), you stop in the middle for Guardian, which is…well, it’s kind of silly, and it’s not really so much a mode as it is just stopping midway.  Of course, given how nerve-racking the actual transformation process is, a break at the halfway point isn’t so bad an idea.  Even following the instructions, I was left to throw my hands up a slightly improvise a few times, and I had at least one point where I very seriously considered running this review without photos of the alternate modes.  Thankfully, the rest of the transformation to full Fighter mode isn’t quite as bad, nor is the reverse transformation back to Battloid (apart from the one pin that fell out during the transformation back.  It’s okay, it’s not entirely structural…).  The Fighter mode is actually pretty nice, and I do really like the little teeny, tiny Roy figure in the cockpit.

THE ME HALF OF THE EQUATION

Since getting into Robotech, I’ve been looking for solid figure coverage of Roy’s Veritech, since Roy’s my favorite pilot, and his Veritech is particularly cool.  I looked at the rather elaborate transforming one that All Time loaned me back in 2018, and I really liked that one, but its price point was a bit scary, so I backed off.  I’ve messed with a few of the smaller ones since, and they’re cool, but always a bit too spindly for me.  I’ve been impressed with Three Zero’s other work, so once I saw they were doing them, I was onboard for this guy here.  He’s fun, in a sort of don’t really want to mess with him all the time, but he’s still really cool to look at way.  I’m glad I got to experience the transforming, and now he can remain purely in Battloid mode for the rest of the time I own him.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3843: Green Lantern

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

GREEN LANTERN

DC UNIVERSE CLASSICS (MATTEL)

For the first time since the middle of February, I don’t have a Super Powers figure set for review today.  I know, I’m sad too.  Alas.  Back in January, I had a pretty solid run of DC Universe Classics reviews, with a pretty good focus in particular on the many Hal Jordan Green Lantern variants Mattel did during the line’s run.  I had one that was *not* featured in January, for rather a good reason: I didn’t own in.  But, well, as the photo above this intro may have clued you in, that’s changed in the months since then.  It was inevitable, I feel.  Anyway, here’s another Hal Jordan Green Lantern.

THE FIGURE ITSELF

Green Lantern was added to Mattel’s DC Universe Classics line in 2010, as part of a larger Toys R Us-exclusive line of repaints.  He was the second of four figures offered quarterly throughout the year, following Batman, and preceding Flash and Nightwing.  This figure was also functionally re-released the following year as part of a DC Universe vs Masters of the Universe Classics two-pack with Zodac, with only the included accessory changing.  The figure stands 6 1/2 inches tall and he has 23 points of articulation.  He uses the same assembly as all the other GL Hals from the line, so medium body, standard Hal head sculpt, and the right hand with the ring on it.  It’s a sculpt I continue to like, but I will say that, as nice as the head is, it’s maybe not quite on the mark for a more modern Hal, which is what this one’s aiming for.  Still, it’s not bad by any stretch of the imagination.  That said, there’s some issues with some of the green plastics from around this time getting brittle, and that happened with mine, resulting in a small chunk of his neck breaking off.  The joint still works and it’s not super visible, but it’s annoying.  Hal’s paint work is the main change-up.  He’s using a similar approach to the one from the 2-pack, with a glossy, metallic finish for his suit.  However, instead of a Super Friends inspiration, Hal’s using his post-Rebirth costume.  So, he loses the “trunks” element of the costume, as well as the other figure’s visible pupils.  I still really like the overall look of the color scheme, but I’d be lying if I said the classic design didn’t still land a bit better for me.  But, at least this one gives other people who didn’t like the last one’s “creepy eyes” a version of the head without them.  Hal’s single-packed release included a power battery, while the two-pack release got a recolor of John Stewart’s gun construct.  Because we certainly wouldn’t want Hal to have the fist construct.  That would be wrong.

THE ME HALF OF THE EQUATION

I remember this figure being released, but, as much as I love Hal, I was getting a bit worn thin on him in 2010.  So, I didn’t track this one down when it was new.  But, as I’ve gotten more of the others I missed, I felt the need to go back and get him.  Thankfully, in my line of work, these sorts of things tend to just land in front of me, which is exactly what happened with this guy.  He’s cool.  Kind of a lot of the same stuff as others, and it’s a bummer mine’s got a slight break, but that’s the cost of DC Universe Classics.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3842: Joseph & Amphibious

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

JOSEPH & AMPHIBIOUS

X-MEN (TOY BIZ)

“Temporarily stricken with amnesia, the evil Mutant of Magnetism, Magneto, now goes by the name Joseph. When he finds himself in the company of the X-Men in the Savage Land, Joseph is free to use his impressive powers of magnetism to manipulate not only metal, but earth as well as his every desire. Alongside his frog-like companion, Amphibious, Joseph proves time and time again why he is one of the most powerful mutants on the planet.”

And we’re headed back into the Savage Land!  But, now it’s gonna get all weird…well, weirder than it was.  Maybe.  It’s all relative.  Or something.  …Where was I?  Oh, right, Savage Land.  For the final entry in the Savage Land set, Toy Biz went really current and topical, with the one and only figure of Joseph, a character whose backstory was still unfolding at the time of this figure’s release, which is why the bio is actually just plain wrong.  Joseph was *not* Magneto de-aged and stricken with amnesia, but rather a *clone* of Magneto, created to best the original, who just so happened to re-surface after the original’s supposed demise.  Magneto’s return wound up leading to *Joseph’s* demise, and Magento’s general turn to the more heroic side since has meant that Joseph’s returns to life have tended to have him take a more villainous role, in order to offset.  It’s a bit complicated, but you know what’s not?  The toys!

THE FIGURE ITSELF

Joseph and Amphibius are the fifth and final entry in the 1997 “Savage Land” assortment of Toy Biz’s X-Men line.  As noted in the intro, Joseph was rather a current addition to the team at the time, making him an interesting counterpart to the rest of the line-up, which consisted of a classic look for Angel, more or less evergreen designs for Ka-Zar and Storm, and a very modernized (at the time) Wolverine.  Joseph actually wound up in the Savage Land the same year this figure was released, but was not with any of the other characters featured (he actually spent most of his time with Maggott, who was *supposed* to get a figure, but it was cancelled…)

Joseph is seen here with his one and only action figure.  There’s something ironic about said only figure not even being a standard look, but it’s at least just a slight variation, and not as far removed as some of the others.  He’s got his same core look, that being the basic blue-and-gold suit, but it’s now sleeveless and he’s added a few things on top of it. The figure stands a little over 5 inches tall and he has 10 points of articulation. Joseph is another re-use heavy figure, making use of a large number of parts from the Age of Apocalypse Cyclops. He gets a new head and left arm. The arm is really just designed to mimic the right, removing the asymmetric armoring of the Cyclops. It also adds an animal skull armor piece to the shoulder. The new head is quite a nice piece, and manages to capture Joseph’s usual depictions pretty well, while also fitting nicely with the base body. The long hair does mean he lacks a lot of neck mobility, but it’s still better than nothing at all. His color work is generally okay; there’s a slight metallic finish to the uniform, which I rather like. The only thing I’m not crazy about is the painted on rips to the uniform. They don’t match the actual molded skin tone, and they end up just looking a bit hokey. Ultimately, it’s the one thing the figure would be better without. Joseph is packed with a disc launching accessory, which can sort of double as a bladed weapon and a shield.

Wolverine and Storm may have gotten made up creatures, but Joseph gets an actual, proper character, and one with no other figure treatment at that. Yes, it’s Amphibious, one of the “mutates” created by the original Magneto during his stay in the Savage Land. It’s a bit of a reach, but certainly a cool one, and he even has an okay tie to Joseph. He winds up being up-scaled a bit to justify taking the “creature” spot. So, instead of being about the same size as a normal person, he’s almost that same height crouching. It’s at least a nice sculpt, if perhaps a slightly exaggerated one. He’s also got slightly more involved painting work than some of the other creatures. And, the head is soft rubber, with a small hole allowing it to be filled with water. Squeezing the head then allows him to “spit.”

THE ME HALF OF THE EQUATION

I had two of the Savage Land sets as a kid. The first was Angel, the other was this one. There were two different KB Toys outlets my family always hit while vacationing. One was right outside our vacation spot, and the other was on the drive back. These came from that second one. I got Angel because I’d lost the one from my original members set. I didn’t have a Magneto in my collection, and at the time, we all still thought he *was* Magneto, so I also got this one. I was also happy to have Amphibious, as I’d just read his original comics appearances at the time. Amphibious got lost somewhere along the way, necessitating a replacement (which actually came from Yesterday’s Fun, which is near where my family vacations), and Joseph himself was part of the box of misplaced X-Men figures I dug out during “The Find” in 2016. This is probably my favorite of these sets, partially because of my nostalgia for it, and partially because it’s the most unique of them, ultimately. In general, I was pleasantly surprised by the Savage Land set. They’re far from high concept, but the execution across the board is a very simple sort of fun.

Flashback Friday Figure Addendum #0025: Luke Skywalker in Imperial Guard Disguise

Posted by Ethan Wilson in Flashback Friday Figure Addendum and tagged with , , , ,

LUKE SKYWALKER in IMPERIAL GUARD DISGUISE

STAR WARS: SHADOWS OF THE EMPIRE (KENNER)

What’s this?  The Flashback Figure Addendums are back on Fridays?  Yes, dear reader, they are.  I moved them to Mondays to tie-in with Marvel, but it was honestly bugging me, because then they’re not “Flashback Fridays” anymore, and it feels like it kind of misses the point.  Additionally, I’m feeling stretched just a bit too thin these days.  And, rather than take a whole hiatus, I’ve decided to give myself a slight breather on Fridays.  So, for the foreseeable future, you’ll be getting four new reviews a week from me, as well as one Flashback Friday Figure Addendum.  For our first Addendum back on a Friday, we’re tying in with yesterday’s Star Wars review, with Luke Skywalker in Imperial Guard Disguise!

“The Empire’s victory in the Battle of Hoth has brought hard times for the Rebel Alliance. Han Solo has been frozen in carbonite by Darth Vader, and two huge bounties have been placed on the head of Luke Skywalker. The Emperor wants him alive, but Prince Xizor , underlord of the most powerful criminal organization in the galaxy, wants him dead. Worse still is that the diabolical Xizor is holding Princess Leia Organa prisoner in his castle on the Imperial Center of Coruscant. this is a tactical maneuver, part of a larger master plan to lure Luke Skywalker into his castle where he can be easily eliminated — the key step in Xizor’s plan to replace Darth Vader at the Emperor’s side. unaware of this danger, the young Jedi and Lando Calrissian sneak into Imperial City hoping to rescue Leia. Simplylaying foot on Coruscant is a dangerous act for these two: high on the Empire’s list of most-wanted outlaws, they could easily be recognized and captured — or assassinated. Disguising themselves as beggars, they “borrow” the armored uniforms from a pair of elite Coruscant stormtroopers. These troopers are some of the Empire’s finest, selected as home guards for the wealthiest and most cultured city in the galaxy. Joining forces with Chewbacca and Dash Rendar, Skywalker and Calrissian attempt to infiltrate Xizor’s nearly impenetrable stronghold and rescue the princess.”

1996’s Shadows of the Empire was important, in that it was the first time the public at large had been introduced to the Star Wars Expanded Universe. It’s also an interesting experiment in marketing, essentially being a movie merchandising campaign that lacked a movie. There were a handful of figures, mixed in with Kenner’s then running Power of the Force II. Newcomers Dash Rendar and Prince Xizor got figures, of course, but there were also new variants of out heroes Luke, Leia, and Chewbacca, all of whom had to take on disguises during this new story. I’ve looked at both Leia and Chewbacca, which just leaves Luke, who I’ll be reviewing today.

THE FIGURE ITSELF

Luke Skywalker in Imperial Guard Disguise was released in the basic figure assortment of Kenner’s Star Wars: Shadows of the Empire line. The figure stands about 3 3/4 inches tall and he has 6 points of articulation. This Luke uses the same head as all of the other early PotF2 Lukes. It’s not the best likeness, but hey, here’s to consistency, right? The rest of the figure is brand new. The packaging dubs his look as “Imperial Guard Disguise,” a name that tends to conjure up the red guards from Return of the Jedi, who look quite a bit different than the look Luke is sporting here. However, the bio fills us in that this armor is actually from one of the elite Stormtroopers on Coruscant, making it a separate look entirely. As with so much of the design work seen in Shadows, the armor is undeniably a product of mid-90s comic book design, meaning it’s a little divorced from the original trilogy designs. His armor’s bulky and ultra padded, and seems to lack that used look we’re so accustomed to. It’s a little hard to reconcile this as a design that would appear in between Empire and Jedi. That being said, it’s hardly a terrible look. In fact, it manages to be rather unique and helps this Luke to stand out a bit from the crowd of other Lukes from over the years. The paint work on this figure is fairly decent, and, like the rest of his design, fairly unique. The red’s a nice shade, and all of the application is pretty clean. He’s packed with a removable helmet and half-cape to help complete his full disguise. Since Luke lost his father’s lightsaber in Empire and didn’t build a new one until the beginning of Jedi, he of course needed a new weapon, so this figure included a taser staff weapon.

THE ME HALF OF THE EQUATION

This figure was, I believe, my first Shadows of the Empire figure. My cousin Noah had saved up to buy the PotF2 Millennium Falcon, and was along for the trip to go buy it. Noah’s mother, who took us on the trip, agreed to get me one figure. Luke was my favorite character, and this figure appealed to my 5-year-old self, so he was the one I picked. I’d say having this guy in my collection already was probably what pushed me to pick up the Bounty Hunter Chewbacca instead of the normal one, and owning these two is certainly not a decision I regret in the slightest.

This is from 2018, when I was pretty deep into my Power of the Force revisit that was brought on by a bunch of figures purchased the year prior.  Luke was, of course, from my original run, so he snuck in there closer to the end.  I was still operating off of the bulk photos I’d shot some time back in early 2016, so he didn’t get updated to get turnarounds.  And, while I had managed to locate both his cape and weapon for the purposes of that review, I had not yet found his helmet, which I found sometime in the last few years and set to the side and promptly forgot about.  But, here it is now!  Beyond those two things, I stand by my review, and I still do love this figure quite a bit.

#3841: Luke Skywalker – Imperial Guard & Princess Leia Organa – Boushh

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

LUKE SKYWALKER — IMPERIAL GUARD & PRINCESS LEIA ORGANA — BOUSHH

STAR WARS: THE BLACK SERIES (HASBRO)

“To gather intel on the Black Sun, Leia disguised herself as an Ubesian bounty hunter. But when Xizor captured her, it was up to Luke — alongside his friends and posing as an Imperial Guard — to rescue her”

Next year, it will have been 30 years since Shadows of the Empire, the multimedia Star Wars “event” set between Empire and Jedi launched.  So, you know, we’re all getting properly nostalgic.  Also, I think the last of the original product might *finally* be starting to dry up.  No, I’m just kidding; that stuff’s never gonna dry up!  Nevertheless, Hasbro’s actually doing some updated versions of a lot of the principal players in their Black Series line, including today’s focus, Luke Skywalker and Princess Leia!

THE FIGURES THEMSELVES

Luke Skywalker — Imperial Guard and Princess Leia Organa — Boushh are a Hasbro Pulse-exclusive Star Wars: The Black Series two-pack.  They hit more or less in tandem with the main line’s Prince Xizor figure, launching this little Shadows of the Empire sub-line.

LUKE SKYWALKER — IMPERIAL GUARD

While for much of the Shadows story, Luke is just wearing slight variations on his looks from the two surrounding films, the look that gets the most play in tie-ins is his Imperial Guard look, when he and Lando steel the armor from the elite Stormtroopers on Coruscant.  It’s notably the look for his vintage Kenner figure, giving it some distinctive play.  The figure stands about 6 inches tall and has 29 points of articulation.  He appears, near as I can tell, to be an all-new sculpt.  That’s not terribly surprising, since it’s a rather unique design.  That being said, this figure does a bit to bring said design just a touch more in line with the general Star Wars vibe, playing up the similarities to the clone armor just a bit.  It’s a solid translation of the design, with a lot of well-rendered textures and layering, making it a very visually interesting design.  As with the original figure, the helmet is removable (though, unlike the earlier figure, the cape is not), and we get a fair run of the mill modern Luke underneath.  The whole thing goes together pretty well, and it’s an impressive piece of work from top to bottom.  The color work is a little brighter than I’m used to, going by the Kenner figure and all, but at the same time, it’s not bad.  The red matches closer to the Black Series Royal Guards, which makes its own degree of internal sense.  He’s packed with the aforementioned removable helmet, as well as his taser staff weapon thing.

PRINCESS LEIA ORGANA — BOUSHH

Within the context of the story, Shadows serves to introduce the Boushh disguise that Leia uses to infiltrate Jabba’s palace in Return of the Jedi, which also serves as a great way for the Shadows tie-ins to double-dip on Boushh disguise Leia molds.  Despite there being other looks for Leia in-story, this figure is hear to offset the cost of new tooling on Luke, hence the re-used look.  The figure stands about 5 1/2 inches tall and she has 27 points of articulation.  From the neck down, she’s identical to the very first Black Series Boushh Leia, and, by extension, it’s Archive re-issue.  It’s a good sculpt, and apart from some slightly older style articulation, there’s not much you can do to improve it.  The one change-up is the head, which goes from being a solid cast piece to being the head/hair two-piece assembly that’s become standard for the line.  I always felt that the Boushh head sculpt was one of the better likenesses for Leia, but the styling was a little outdated, so I get the need for update.  Ultimately, this one’s more technically advanced, but I think it looks less like Carrie Fisher, so it’s a bit of toss-up in terms of which one’s actually better.  The paint work is again very similar to the last release, with only the head really changing things up, again to bring things more up to modern standards.  Like her prior release, Leia is packed with her helmet, staff, and thermal detonator.

THE ME HALF OF THE EQUATION

I’m slowing down on Black Series these days, and I don’t *need* to get all of the Shadows figures, what with having the originals and all, but at the same time, I’m a sucker for that Luke design.  When these were shown off, I was certainly interested, and Max was thankfully nice enough to hook me up with a set, since he was ordering one for himself.  Now that they’re here, they’re certainly…well, they’re certainly the smaller figures, but bigger, I guess.  Both of them are nice, for sure, and Luke’s a particularly impressive piece himself.  But, as with so much Black Series these days, I don’t know that my own personal excitement is there much.

#3840: Janine Melnitz

Posted by Ethan Wilson in Reviews and tagged with , , ,

JANINE MELNITZ

GHOSTBUSTERS (DIAMOND SELECT TOYS)

I don’t talk about Ghostbusters *a ton* here on the site. I love the first movie, and there’s certainly plenty of toy coverage, but it tends to be a little spotty. I really liked Plasma Series and when that ended, I sort of moved on, I guess. The Ghostbusters themselves have always been quite toyetic, but their supporting players are more of a mix. Annie Potts’ Janine Melnitz, present in both original movies and much of the spin-off media, tends to get overlooked, being a receptionist who dresses like a receptionist, and is therefore not super thrilling. She did, however, get a figure from Diamond’s run, so let’s look at that!

THE FIGURE ITSELF

Janine was released in Series 3 of Diamond’s Ghostbusters line. She’s based on her first movie look, which is a little more reserved and “real world” than her look from II, making it the less likely of the two for toys, typically. The figure is about 6 3/4 inches tall and she has 26 points of articulation.  The Diamond figures were 7-inch scale, so they don’t really go with the Mattel or Hasbro offerings, but they do go with other DST offerings, I guess.  Or, maybe Janine is just, like, really tall.  The articulation on this figure is rather on the restricted side.  Obviously, areas such as the legs make a degree of sense, since she’s got the skirt and all.  What’s more surprising is the elbows, which don’t even get to a full 90 degree bend, seemingly for no reason at all.  It makes it difficult to do much with her beyond just standing her there.  Her sculpt proper is decent.  It’s definitely right in line with the rest of the line’s quality, and DST’s 7-inch figures in general.  The likeness on the head is decent, if perhaps somewhat marred by the very thick glasses; they wind up looking quite silly.  The body sculpt has generally okay proportions, but the limbs seem maybe a touch on the long side.  Generally, though, it’s not bad.  You can take her sweater vest off, for a slight change-up of look, if you’re so inclined.  The paint work on Janine is the usual DST affair, so it’s rather thick, and totally covers the figure, with no molded colors.  It hides a lot of the sculpted details, which is a bit unfortunate.  The application is at least pretty cleanly handled, though.  Janine is packed with two sets of hands (in open gesture and…slightly different open gesture), a Chinese food container, a phone, and part of the rooftop diorama.  The hands having no sort of grip or anything makes the rest of the accessories a little bit pointless, but I guess she at least gets *something*.

THE ME HALF OF THE EQUATION

I didn’t pay much attention to this line when it was hitting.  I was too burned by the Mattel stuff, and I didn’t really come back around until Plasma Series hit, and I definitely liked the styling of that one more.  Of course, there was no Janine in that line, which was a bit of a bummer.  Also, I spent a span of about three months listening to Annie Potts’ voice in the Toy Story movies every single morning, and that sort of highlighted the lack of proper Annie Potts representation in my collection, which I just didn’t feel should stand.  So, when this figure was traded in at work, I felt compelled to buy it.  She’s hardly anything amazing, but she’s also not terrible, and she’s certainly good for just standing there, which is what Janine does tend to do best.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3839: Red Tornado

Posted by Ethan Wilson in Reviews and tagged with , , , ,

RED TORNADO

SUPER POWERS (KENNER)

You know, the last time I broke from McFarlane Super Powers coverage to go back to the vintage Kenner stuff, it was for a spinny sort of robot guy.  So, this time around, as I break from the McFarlane Super Powers coverage, it’s to look at a vintage Kenner figure of a….spinny sort of robot guy?  What are the odds?  Well, actually 1 in 17, because there’s the 2 of them in the original 34 figure run and all.  So, you know, simple math and all that.  Last time, however, it was Cyclotron, a character made up by Kenner for the line, but this time it’s DC’s original spinny sort of robot guy, Red Tornado!

THE FIGURE ITSELF

Red Tornado was released in 1985 as part of the second series of Kenner’s Super Powers line.  This was Red Tornado’s first action figure, and would remain so until Hasbro added him to their JLA line in 2000.  The figure stands 4 1/2 inches tall and he has 8 points of articulation.  He’s got all the standard articulation, plus movement at the waist, which is tied into his action feature, though it does still actually hold a little bit of posing.  Red Tornado got a totally unique sculpt for the line.  He’s sporting his second, and by far best known design, which he’d had for almost two decades at this point, so it was a sensible choice.  It’s a solid recreation of things.  The design elements are all raised, which is actually quite a nice way of handling it, and gives the design quite a bit of pop.  He gets a cloth cape, as was the usual for the line.  It’s a fairly nice cape, with the collar, and printed striping on the sides.  His paint work’s rather simple, largely just being the yellow detailing.  It does what it needs to, which is the important thing.  Red Tornado’s action feature is “Power Action Tornado Twist;” squeezing his arm spins his lower torso at the lower half.  It’s a little finicky, but not a bad recreation of his comics power.

THE ME HALF OF THE EQUATION

Red Tornado is actually one my earliest Super Powers…possibly even my first?  It was either him or Aquaman.  I got him at a Farpoint, and I was exploring the dealers room with my Grandmother, and I wanted either this or the ToyFare-exclusive Reverse Flash, both of which were kind of expensive.  This wound up being the one, even though he didn’t have his cape.  He went over 20 years sans-cape, but I finally got one thanks to Jason at All Time.  He’s a neat figure, and a highlight to a line that’s already itself a highlight.

#3838: Savage Storm & Colossus Mutant Dino

Posted by Ethan Wilson in Reviews and tagged with , , , ,

SAVAGE STORM & COLOSSUS MUTANT DINO

X-MEN (TOY BIZ)

“The weather goddess, Storm is always ready to stir up the elements. With the weather at her every command, Storm can summon a bolt of lightning, call forth a tornado or even fly on powerful winds she controls. Storm helps lead the X-Men into battle with the help of a native of the Savage Land, a Triceratops’ devastating head ramming action, Storm is unstoppable.”

We’ve once more kicked off the day with a quick look back at one of my earlier Toy Biz Marvel reviews, and I intend to keep that particular train running, specifically with a focus on those particularly savage variants of the X-Men. Today, we continue last week’s venture into the heavy hitters side of the line-up, with Storm!

THE FIGURE ITSELF

Storm and Colossus Mutant Dino are the fourth of the five sets in the “Savage Land” deluxe assortment of Toy Biz’s X-Men line, released in 1997. I’ve mentioned before that this line sort of pairs off with the “Space Riders” set, and this really calls to that, because Storm’s easily the biggest name *not* included in that set, allowing her to take the focus here.

As perhaps the only X-Man included here who wasn’t “going through some stuff” in terms of her appearance in the mid-90s, Storm winds up being perhaps the most evergreen of these figures, barring Ka-Zar. Her design here calls back to a few of her more “casual” looks from the ’70s and ’80s. The figure is about 5 inches tall and she has 7 points of articulation. No movement on the elbows or knees, but she does at least get a disc and peg assembly on the shoulders, which gives her some better range. She’s got what appears to be a wholly unique sculpt. It’s not a bad one, but, on my copy at least, her hair is all just pegged in place, not properly glued, so it all falls out a lot. The main outfit is removable, showing off a sort of a bathing suit get up, if for some reason that’s the approach you want to take. Personally, I prefer the whole assembly. The color work here isn’t bad. Very much sticks to her usual sorts of colors, but she does also get a little bit of tribal style painting, much like Ka-Zar.

Storm gets no accessories of her own, but does get a dino buddy, who is a triceratops named Colossus. Why is he named Colossus, the name of a member of the X-Men? Did Colossus get turned into a triceratops? Or did Storm just miss her pal and name something after him? The bio has nothing to say about that, which feels like a missed opportunity. It’s a pretty fun little toy, at least. He’s got basic movement, and a little ramming feature that extends his head. He’s also got metal banding on his limbs, which supports the “mutated Colossus” bit, but then also could be why she named him after her pal? It’s still inconclusive. Well, I got a cool triceratops toy either way.

THE ME HALF OF THE EQUATION

This isn’t one of the original sets I got from this line-up, but it was one that always fascinated me, especially the bit with Colossus. When I found the lot that got me Ka-Zar, I was honestly pretty happy this one was in there too. It’s a neat concept, and while I have some slight assembly issues with the main Storm figure, I think it’s an overall better package than the Wolverine set.

Flashback Figure Addendum #0024: Nightcrawler

Posted by Ethan Wilson in Flashback Friday Figure Addendum and tagged with , , , ,

NIGHTCRAWLER

X-MEN (TOY BIZ)

Let’s keep this non-Friday Addendum’s game running!  Time to update some more Toy Biz X-Men.  This time, it’s Nightcrawler!

“Nightcrawler is the X-man with the most amazing mutant ability – teleportation! Nightcrawler can instantaneously move himself to a spot up to three miles away in the blink of an eye. Nightcrawler is also an excellent acrobat. He can crawl up almost any surface. His amazing tail is almost like a third arm… not only can Nightcrawler hang from it, he can make it hold and use weapons ranging from swords to ray blasters!” The first assortment of Toy Biz’s long-running X-Men line is a veritable who’s who of heavy hitters from the franchise. It’s before they’d committed to going deep into the mythos the way later assortments the way they did later. Included amongst those figures was fan-favorite Nightcrawler. Interestingly enough, Nightcrawler wasn’t actually with the team at that point, having moved onto Excalibur in the mean time. Nevertheless, they were going for more of greatest hits thing, so in the line he went.

THE FIGURE ITSELF

Nightcrawler was, as noted in the intro, part of the first series of X-Men figures. He was also re-released a bit later, during the “repaints” portion of Series 3, but unlike others in that sub-set, he was essentially unchanged. The figure stands 4 1/2 inches tall and he has 9 points of articulation. Fun fact: when the prototypes for this series were first developed, the original plan was for all figures in the assortment except Nightcrawler to have the basic 5 POA. That changed (mostly anyway), but it’s nice that they always planned to give Nightcrawler actual articulation. His sculpt is the strongest of the Series 1 figures (rivaled only by Magneto for that title), and has aged far better than others. He’s not as limited in movement as Storm, nor is he as rudimentary in design as Cyclops. He’s actually just a pretty darn faithful recreation of the character’s ’80s design. The only slight marring of the sculpt are the two suction cups mounted on his left hand and right thigh. They’re super obvious, rather goofy looking, and not particularly effective. I actually ended up prying them off of one of my two Nightcrawler figures, which improves his look a bit, though he’s still got the visible pegs. Why they added these things kind of baffles me, since it mars an otherwise quite strong sculpt. Nightcrawler’s paintwork is decent enough, being mostly pretty basic work. It matches the others in the assortment, and his comics appearances as well. Nightcrawler was originally packed with a cutlass, which both of my figures are, sadly, missing.

THE ME HALF OF THE EQUATION

I got my first Nightcrawler from a flea market near my house. He was my go-to version of the character for a long time. And then I packed up a bunch of my figures like some stupid baby, and this guy got put in the box that ended up buried in the back of the garage, so he was missing for about 5 years. In the mean time, I had tracked down a replacement. Now I have both, and I couldn’t be happier, because, as I noted, he was my go-to. I think he’s still my favorite Toy Biz version of the character. 

This review hails from the summer of 2018.  As Toys R Us closed down and All Time Toys recovered from the second flood to shut them down in the space of less than two years, I was admittedly a little down on things and looking for something comforting, so I started pushing back into reviewing the Toy Biz figures again.  It’s my comfort thing.  The Nightcrawler review’s pretty solid.  I didn’t note, though, that there are actually two styles of tail: a thinner, harder plastic version, and a thicker, more rubbery one.  My original (which is now sans suction cups) was the thinner tail, and the replacement was the thicker.  Missing from the original review was the figure’s cutlass, which I finally managed to snag.  It’s small and a bit warped, but pretty fun. 

#3837: Hoth Chewbacca

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

HOTH CHEWBACCA

STAR WARS: POWER OF THE FORCE (HASBRO)

“Chewbacca, like all members of the Wookiee species, was indigenous to the jungle planet of Kashyyyk. Honorable, intelligent, and friendly, though fierce and dangerous when angered, Wookiees were a proud species who once made contributions to the Galactic Republic. Wookiee senators represented Kashyyyk in the Galactic Senate. Their respectable position changed, however, when the Imperials seized power and began enslaving the extraordinarily strong Wookiees as laborers. In Chewbacca’s case, he escaped slavery and death with the help of a young officer by the name of Han Solo, who destroyed his military career to save the innocent Wookiee. A life debt was established, and Chewbacca joined Han in his adventures through the galaxy. Later on, the duo played significant roles in the Rebel victory over the Empire, and the Wookiee species was restored to its position of honor in the galaxy.”

One of the sets of Power of the Force figures I’m slowly working my way through is the Flashback figures, the sort of odd promotional set for the pending Episode I figures that were yet to be.  They did, if nothing else, give a decent opportunity to re-release some heavy hitters, though some of the flashback connections were…a bit of a stretch.  Obviously, not everyone had a direct equivalent in Episode I, but for Chewbacca here, the equivalent was…a Wookie Senator? Do you guys remember the Wookie Senator?  Because I don’t.  He didn’t even get his *own* figure.  Well, here’s Chewy.

THE FIGURE ITSELF

Hoth Chewbacca was released in the 1998 assortment of “Flashback Photo” Power of the Force figures.  He was the third version of Chewy in the main line, and completed the set-up of one per movie, being specifically based on Empire, the only one not covered up to that point.  The figure stands 4 inches tall and he has 6 points of articulation…sort of.  As with all the Chewbaccas in the line, he’s got a neck joint, but it doesn’t really do much.  Otherwise, it’s pretty normal stuff for the line.  His sculpt is similar to the other two Chewbaccas from the same year, which was notably a departure from the earlier, far more buff version of the character.  It’s not spot-on, but it’s a more accurate build at least.  His paint work is what makes him officially a “Hoth” figure; he’s got a bunch of white detailing painted over top of everything else, so he looks like he’s been out in the snow.  It works okay.  It’s at least different, right?  Sure, let’s go with that.  Chewy is packed with his bowcaster, which is the same piece used with the others in the line.  He also gets the flashback photo, which shows the earlier mentioned Wookie Senator.  Wooooo.

THE ME HALF OF THE EQUATION

Hoth Chewbacca has the distinction of being the last Flashback Photo figure I needed for my collection (though he’s not the last one I need to review; I’ll get on that, I swear!), which is honestly kind of silly, because he’s hardly a rare figure.  I just happened to not get him for a while, and then when I had all the others, he wasn’t immediately in front of me.  But, then he was, so I guess that was nice.  He’s okay.  Very specific, but honestly, that’s not such a bad thing.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.