Author Archives: Ethan Wilson

#2362: Superman

Posted by Ethan Wilson in Reviews and tagged with , , ,

SUPERMAN

DC HEROES UNITE (SPIN MASTER)

Well, I’ve just gotten word that the contents of yesterday’s post count as infringement on National Publications’ IP, so in accordance with that, I guess I have to replace it with a genuine National Publications product.  What am I getting at here?  I guess this is just my lazy attempt at a humorous way of saying “Hey, check out this Superman figure.”  So, uhh, hey, check out this Superman figure.

THE FIGURE ITSELF

Superman is part of the first assortment of the DC Heroes Unite line from Spin Master.  He’s one of the most common figures in the assortment, which is sensible, what with him being a fairly basic Superman and all.  He’s actually a little behind the times, since he’s sporting his second Rebirth-era costume, which has subsequently been replaced by his classic design.  In Spin Master’s defense, however, it still does show up in various licensed art and merch from time to time.  I would also be genuinely shocked if a classic Superman wasn’t already planned for a later release.  The figure stands 3 3/4 inches tall and he has 17 points of articulation.  Structurally, this figure is essentially identical to the black suited Superman I already looked at from the line.  The only difference between them is the addition of a cloth cape, which is the same style of piece that Shazam used.  Again, the cape’s not terribly impressive, although I do like the insignia printed on it.  Otherwise, I’m still quite happy with the sculpt of this figure, and probably even a little moreso on this particular figure, since there are a number of details specific to this design that looked a little out of place for the previous release.  In terms of paint, Supes is pretty standard fare.  The application is all pretty cleanly handled, with minor bleedover on my figure.  As with the others in this line, the accessories are blind packaged and there are a few different options.  I got the “Metropolis Mayhem” selection, so my figure has the same selection of extras as my black costumed figure: the armor in blue, the Kryptonite in green, and the eye beams in red.  There is also a collector’s card as well, which is actually the same one included with yesterday’s Shazam figure.

THE ME HALF OF THE EQUATION

I was really happy with the variant Superman I picked up, and was feeling the need to own one in more classic coloring.  I saw this guy on a routine run through Target, but passed on him at the time, telling myself if he was there the next time I came through I’d grab him.  As luck would have it, he was.  There’s not much new here, since I pretty much looked at him before, but I do still really like him, and I look forward to getting more of this line as I have the opportunity.

#2361: Shazam!

Posted by Ethan Wilson in Reviews and tagged with , , ,

SHAZAM!

DC HEROES UNITE (SPIN MASTER)

In the ’40s and ’40s, Fawcett Comics’ Captain Marvel (now more commonly known as Shazam) was outselling pretty much anything else in the comics market, including National Publications’ (later DC Comics) Superman.  National wasn’t much of a fan of this, and launched a lawsuit positing that Captain Marvel was in fact an illegal infringement on National’s Superman.  In a case that it is widely agreed wouldn’t hold water these days, National successfully defended this point, and Fawcett was forced to cease publication of Captain Marvel, and in fact shut down entirely.  Years later, the character would return, now under National/DC’s banner, and…unable to use his real name on the cover of any book he appeared in, since Marvel Comics had grabbed the title in the time the character was out of publication.  He sort of puttered around in the background of the DCU for a good long while, but has seen something of a resurgence in the last few years, thanks in no small part to the success of the Shazam movie last year.  It’s thanks to this resurgence that Shazam is a natural choice for the launch of Spin Master’s DC product!

THE FIGURE ITSELF

Shazam is part of the first assortment of Spin Master’s DC Heroes Unite line, as one of the more common figures in the line-up.  He’s seen here in his current costume, which is the one he’s been sporting since the New 52 relaunch.  It doesn’t quite have the same cleanness of the original design, but it works well enough.  The figure stands 3 3/4 inches tall and he has 17 points of articulation.  Shazam is sporting an all-new sculpt, and it’s pretty much on par with the rest of the line so far.  It’s a solid recreation of the character, with a little bit of a stylization to it that works pretty well for this type of line.  I like that, like Superman and Nightwing, he’s got his own distinct build; he’s actually the largest of the ones I’ve looked at (well, excepting King Shark, of course), which feels right given the usual depictions in the comics.  The head manages to really capture that “child in an adult’s body” aspect that the character needs, and the body works in a lot of costume specific details that I honestly wasn’t expecting to see given the other two figures I looked at.  Perhaps the only real downside is the figure’s cape; it’s a rather cheap, very flat piece of almost paper-like cloth.  It’s not terrible, but it does connect to the back a little bit awkwardly, and it’s not so aesthetically pleasing when you view the connection head-on.  From the front, though, it looks alright, and given the price point we’re dealing with here, it doesn’t pull me out of things too badly.  Shazam’s paint work is pretty basic, but for the most part pretty decent.  The only slight issue with mine is that the right boot doesn’t seem to have gotten quite as much coverage as the left, so they’re a little uneven.  Shazam is packed with an electricity effect, a girder, and (coolest of all) a little Billy Batson figurine.  The coloring on these accessories indicates that he’s got the “Metropolis Mayhem” selection.  Regardless of the coloring, I think this is probably the coolest selection of accessories so far on these guys.  There’s also the collector’s card like we saw with the other two figures.

THE ME HALF OF THE EQUATION

My Dad was kind enough to pick this guy up for me.  I had shown him the Superman and Nightwing, and he wanted a Superman of his own, and came across this guy at the same time.  I really dig him just like I’ve really dug the other releases I’ve picked up.  Of the two new DC licensees, I gotta say, I’m really feeling the output of Spin Master a bit more than McFarlane.  I’m definitely down for more of the line.

#2360: Flint

Posted by Ethan Wilson in Reviews and tagged with , , , ,

FLINT

G.I. JOE: SIGMA 6 (HASBRO)

“Flint worked with many stealth forces before joining the GIJoe team. He leads espionage operations, while Duke commands tactical missions. Like a cat hunting the night, he is silent and unseen, until he attacks with the full force of his impressive combat skills. He and Snake-Eyes make a perfect team: the knife that cuts the night, and the arrow that pierces the dark. His multi-weapon system can be configured in different ways, and the custom-made sword is this stealthy hunter’s formidable ‘claw.'”

With a new relaunch of G.I. Joe almost upon us (provided the world doesn’t end first, of course), I’m in a mood to delve back into some of their previous re-launches.  Let’s take another look at poor old Sigma 6.  Initially, Sigma 6 placed its focus on a core team of arguably the most memorable (or at least marketable and distinctly different) Joes, upgrading them to a more multipurpose task force, in order to fill some of the spots classically taken up by the ’80s line’s more specialized forces.  However, by the time of the line’s third and final year, they decided to expand things ever so slightly, and reintroduce a few more of the ’80s characters into the fold.  Some of those figures were fairly faithful updates of the old toys, while some of them went a little more for the reinventing side of the line.  Today’s focus, 1985’s Warrant Officer Flint, fell into the latter category, with a pretty hefty rework.

THE FIGURE ITSELF

Flint was released in the third Commando wave of the 2007 line-up of G.I. Joe: Sigma 6…well, okay, technically it wasn’t “Sigma 6” anymore, as Hasbro had dropped the branding from the toys after the show stopped airing.  But they were still in the same style and are a continuation of the same line…and otherwise it’s just a line simply titled “G.I. Joe” with no further modifiers.  I’m getting kind of off topic and distracted.  Sorry.  So, Flint was in the penultimate Commando wave of the line, and definitely sticks with the end of the line’s slight move away from some of the stricter team-building they’d been doing previously.  Interestingly, Flint’s bio describes him as a character that’s really, really different from his more “mainstream” counterpart, suggesting that perhaps he had already been planned for an appearance of some sort on the show before it wrapped up?  I know other figures from late in the line were based around un-used cartoon concepts, so maybe Flint was too.  The figure stands a little over 8 inches tall and he has 25 points of articulation.  He’s also got the Kung-Fu grip feature on his right hand, which allows for some slight movement on the fingers, but is designed to snap back into place for a tighter fit on the grip (which is actually a totally different design than the original kung-fu grip; his left hand is actually far closer to the original design).  Flint was an all-new sculpt, and one of the most unique sculpts from the line.  He doesn’t go for the sigma-uniform variant that the other Joes in the line did, making him feel like more of an outsider.  It also gives him a slightly more generic, and slightly more real-world appearance, at least in terms of what he’s wearing.  He still maintains the line’s signature style, of course, but he’s not wearing anything that looks particularly sci-fi-y.  He’s also not wearing anything that looks particularly Flint-y.  About the closest you get to a traditional Flint item is that his cloth vest piece has some straps of pouches that look somewhat like the original figure’s “suspenders.”  The head represents possibly the most radical departure of all.  Not only does he not get Flint’s signature beret, he’s got long hair, possibly the longest hair of any of the main Joes in the line.  It even covers part of his face!  What kind of a warrant officer would stand for that?  The kind that’s not actually a warrant officer, I suppose.  He’s also got a pretty sizable scar running down the left side of his face, but scars are hardly a new development when it comes to the Joes.  Flint was packed some climbing gear, which included his vest and a harness for his pelvis.  He also included a gun which could be broken down into much smaller components, but like a lot of my Sigma 6 collection, my figure is missing a good number of his parts.

THE ME HALF OF THE EQUATION

Sigma 6 was difficult enough to find at retail when retailers were supporting it, so when they stopped supporting it late in the line, the figures became practically non-existent.  By the time of Flint’s introduction, I’d pretty much given up any hope of really getting any of these at retail.  Thanks to some hunting over the years on my part, I’ve managed to actually find a few of the ones I wanted, Flint included.  Flint is an interesting inclusion in the line, especially since the only thing that connects him to the original character is the name Hasbro stuck on the box.  That doesn’t stop him from being a really cool figure, though, and I’m glad I was finally able to add one to my collection.

#2359: Captain Britain

Posted by Ethan Wilson in Reviews and tagged with , , , ,

CAPTAIN BRITAIN

MODERN AGE (TOY BIZ)

“As a research assistant at Darkmoor Research Centre, Brian Braddock was a typical physics student.  During a botched theft at the facility, Brian was nearly killed in a motorcycle accident he suffered while trying to escape.  The legendary Merlin the Magician saved Brian’s life and bestowed upon him a mystical suit that gives him superhuman powers, transforming him into Captain Britain.  While the suit Captain Britain wears gives him superhuman strength, the ability to fly and erect mystical force shields, he is powerless without it.  As Britain’s honorary protector, keeping the UK safe from peril, Captain Britain is a formidable opponent for any foe.”

At the beginning of their lengthy run with the Marvel license, Toy Biz initially focussed on the Marvel Universe as a whole, before splitting things up into several different lines, most of which were themed around one of the handful of Marvel cartoons which launched during the ’90s.  By the end of the decade, those cartoons were all pretty much wrapped up, but there was still a fair bit of steam in the 5-inch locomotive, so they did several single-assortment series, each with its own theme.  In 1999, they paired two off, a Silver Age and a Modern Age line, covering Marvel’s history through a mix a bigger name and minor characters.  On the more minor side, it was through these assortments that Captain Britain got his first action figure, which I’ll be taking a look at today!

THE FIGURE ITSELF

Captain Britain was among the four figures in the Modern Age line.  As the only character created post-1975, he was probably the best representation of the assortment’s purpose, especially since he was wearing an ’80s era costume.  The figure stands 5 inches tall and has 9 points of articulation.  Captain Britain was built on the body that began its life as Archangel II, a favorite of Toy Biz’s.  By this point, it had gotten some minor retooling to change-up the posing on the hands and to remove the remains of the wing-flapping mechanism from that figure, meaning he actually looks a bit better than most of the others who used this body.  The head is also re-used, coming from the Iron Man line’s Blacklash figure, though as with the Guardian figure that also used this head, the ponytail has been removed.  While internally its a nice enough assortment of parts, compared to the rest of Toy Biz’s stuff, it did make poor Brian rather small when compared to his comic book incarnation.  This wouldn’t be the last time Toy Biz would make a diminutive Captain Britain, either.  Did no one check the style guide for his height?  His paintwork was really cool…when he was new anyway.  On my figure, it really didn’t hold up to time, and definitely shows a lot more wear and tear than my other figures from the same era.  I have to wonder if it was something to do with the slightly metallic finish?  It certainly looked really nice when he came out of the package.  He’s done up in his Alan Davis-designed costume, which is his best one, really, and certainly the most lasting design.  Like others that use this mold, the details of the costume don’t quite match up to what’s sculpted, but it’s minor here.  Captain Britain was packed with an energy staff (recolored from Gambit) and Lockheed (repacked from Magik), but my figure has neither at this juncture.

THE ME HALF OF THE EQUATION

I got this figure when it was relatively new via a trip to the KB Toys outlet that was near the spot where my family vacationed.  I didn’t know a ton about the character, but I sure thought this figure looked cool.  At the time, I also got an animated Superman, so I recall the two of them facing off a lot during that trip.  Small stature and slightly ratty hold-up of the paint do drag him down a bit, but even in his current state I do really like him and I still have those fond memories!

#2358: Count Dooku

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

COUNT DOOKU

STAR WARS: THE BLACK SERIES (HASBRO)

“Count Dooku was a menacing Sith Lord and central figure in the Clone Wars. Once a Jedi, he became disillusioned with the Jedi order and thirst for greater power.”

For each entry in the Prequel Trilogy, they really tried to introduce a new and compelling villain.  They had three really strong starting points, but all three ended up being a lot of wasted potential, at least until the Clone Wars cartoon came along and actually tried to do something with them.  For Attack of the Clones, arguably the weakest of the three prequel films, Lucas got Christopher Lee, one of the greatest actors ever to grace the silver screen, to portray the role of Count Dooku, the second attempt at a decent foe.  To say the role squandered Lee’s talent is something of an understatement.  Still, he did have a cool look, and he was still Christopher freaking Lee, so no one’s gonna say no to some action figure love for this guy.  He was the final main prequel foe unaccounted for in the Black Series, but now he finally gets to join the line!

THE FIGURE ITSELF

Count Dooku is figure 107 in the Black Series line-up.  He closes out this round of figures (the Sith Jet Trooper bridges the gap between the Knight of Ren and this figure as number 106, but he’s a repaint, so I haven’t picked him up yet), and is our second prequel figure in the set, which is a little surprising, since they tend to be fewer and further between than the other films.  The figure stands 6 1/2 inches tall and he has 29 points of articulation.  He actually manages to be one of the most poseable Black Series offerings, especially for one of the Jedi.  He’s even got the butterfly joints like we saw with the Sith Trooper, which I hope are going to become a more regular feature for the line, much like the double ball-jointed necks have.  The sculpt is an all-new affair, and another really good one at that.  The head has a really nice Lee likeness, and they’ve certainly captured his rather impressive height.  The line has been going back and forth on cloth vs plastic for the capes, but Dooku goes with cloth.  While it does rob him of the cape’s proper collar from the film, it nevertheless works very well, and with its two-tone design, it’s definitely among the nicest cloth pieces from the line.  Dooku’s paintwork is mostly pretty basic, with the exception of the head, which of course uses the face printing for a nice realistic look.  Dooku is packed with his distinctive curved-hilted lightsaber (which no one on the production of the films apart from Christopher Lee seemed to understand was not designed to be held like a standard lightsaber….sorry, it still bugs me), which has not one, but two blades.  The first is a standard one, but the second has a slight spread to it, simulating it being swung around.  It’s a pretty cool idea, and I’d like to see more of it.

THE ME HALF OF THE EQUATION

Attack of the Clones lies in an odd spot for me.  It’s unquestionably my least favorite Star Wars film, and I genuinely think it barely even qualifies as a movie.  Despite that, I’m filled with an odd bit of nostalgia for the film and all the stuff associated with it, Dooku very definitely included.  I was definitely on board for this figure, and I think the final product is yet another strong entry in this latest round of figures.

Count Dooku was purchased from my friends at All Time Toys.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2357: Knight of Ren

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

KNIGHT OF REN

STAR WARS: THE BLACK SERIES (HASBRO)

“An enclave of masked warriors wielding distinct weapons for ranged and close quarters combat, the Knights of Ren are elite, fearsome enforcers of Kylo Ren.”

First mentioned and briefly glimpsed during The Force Awakens, the Knights of Ren were the source of much fan speculation.  After their more proper appearance in The Rise of Skywalker….well, people are still kinda speculating, I guess.  Like the Praetorian Guard in The Last Jedi, the Knights of Ren had a cool look and did at least get one cool fight scene, so they weren’t quite as pointless as, say, the Sith Troopers.  Of course, they all had unique appearances, so they aren’t quite army builders, either.  We got one of them as a Vintage Collection figure at the Force Friday launch, and now we’ve gotten another as a Black Series release.  So, let’s have a look at this guy.

THE FIGURE ITSELF

The Knight of Ren is figure 105 in the Black Series line-up.  Thought the package just lists him as “Knight of Ren,” this guy is actually meant to be “Vicrul”, since all of the Knights were actually named.  He’s also the Knight named “Grenade Head” by the production crew, because his…head…looks like…a grenade.  Yeah, I guess that one’s pretty cut and dry.  The figure stands just shy of 6 inches tall and he has 29 points of articulation.  His articulation has its ups and downs; the range on the arms is pretty nice, but I found the movement on the legs to be a little bit awkward, especially at the knee.  He’s not really restricted, just the style of movement is a little weird and not as smooth as a lot of the line’s more recent figures.  The sculpt on Vicrul is an all-new affair, and it’s pretty decent.  It’s not quite as close a recreation as some of the other figures in this assortment.  His body definitely seems  a little more squat than in the film, and the helmet’s design has a few elements slightly out of place.  The faceplate is a little bit on the long-side, especially compared to the other details.  It’s still a pretty sharply detailed piece, and the rest of the outfit’s got some decent texture detailing mixed in.  Vicrul’s paintwork is actually pretty nice.  While most of the Kylo’s have just stuck with the clean black look, this guy actually gets some decent grime and dirt on he gear.  It’s the heaviest on his feet, but there’s some spots of it on the jacket as well.  It does a respectable job of getting that worn-in appearance that the character really had in the movie.  Vicrul is armed with a Phrick-Schythe (the pointy thing) and a blaster pistol.

THE ME HALF OF THE EQUATION

The smaller-scale Knight figure didn’t really pique my interest, so I ended up skipping him.  The announcement of this guy didn’t do a lot to excite me either, but I was on board for the others from the set, and I did like the look of this particular figure a little bit more, so I ended up grabbing him.  Of the four figures I picked up from this assortment, I expected to like this one the least, and ultimately that proved true.  However, I did end up liking him more than I’d anticipated.

The Knight of Ren was purchased from my friends at All Time Toys.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2356: Transforming Bruce Wayne

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

TRANSFORMING BRUCE WAYNE

BATMAN FOREVER (1995)

Today I’m making a return to the line that started these wacky-tacky reviews.  It’s more Batman Forever, but like another variant of that main guy.  Dig it.

THE FIGURE ITSELF

Tansforming Bruce Wayne is another Batman Forever figure.  He’s batman but when he’s not Batman.  Also he’s Val Kilmer because it was the ’90s, but not the early ’90s when he was Michael Keaton or the late ’90s when he was George Clooney (yuck, don’t make me think about it, dudes).  He could transform into Batman with armor, most of which is still present, because instead of loosing the armor, silly child Ethan lost the whole darn figure.  Silly child Ethan.  Such a child.  I got another one but I gotta wait til the next section for that.

THE ME HALF OF THE EQUATION

It all started when I was born.  As a child of the ’90s I became a part of a society that fully embraced Val Kilmer and we made him Batman.  We did that, people.  Think of it and weep.  As the constructs of walking and talking and collecting formed in my mind, Kilmer rang out, jumping from the shelf of that service merchandise, calling to me.  Buy me Val Kilmer said, and I was sore afraid.  So I bought him.  Well, my parents did.  And I saw that it was great.  But no it wasn’t great.  It was Val Kilmer.  And so silly child Ethan FLUNG him to the far corners of the Earth, never to be found again.  That showed him.  But then he came back.  Oh dear.  Here he is.  Being reviewed.  That’s pretty much it…

(Oh gosh, did we leap through some sort of time warp, because it’s feeling real 2013 up in here…nah, it’s just April Fool’s Day.  Got ya?)

Continue reading →

#2355: Clone Commander Bly

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CLONE COMMANDER BLY

STAR WARS: THE BLACK SERIES (HASBRO)

“A veteran of many Clone Wars battles, Clone Comander Bly (clone designation CC-5052) served in the 327th Star Corps on such worlds as Quell, Maridun, and Felucia.”

When first introduced during the climax of Attack of the Clones, the Clone Troopers had no names, no personality to speak of, and no hint of individuality.  It wasn’t until Revenge of the Sith that we really got any hint of there being more to the clones than that, with the introduction of a handful of named individual clone commanders.  Amongst that handful of clones commanders was Bly, whom I’ll be taking a look at today.

THE FIGURE ITSELF

Clone Commander Bly is figure 104 in the Black Series line-up.  Amazingly, he’s only our third clone commanding officer in the main line, and only the second under the current numbering system (the two prior figures being Cody under the blue-style packaging, and Rex under the current set-up).  Bly was one of the clones who we saw in both sets of armor over the course of The Clone Wars and the movies, but the figure opts for his Phase II appearance from Revenge of the Sith.  It’s sensible, given that all of our commanders so far have been in their Phase II armor, making for a more cohesive appearance. The figure stands 6 1/4 inches tall and he has 31 points of articulation.  While the vast majority of the clones use the same pool of standard clone parts, Bly marks the first time we’ve seen a re-use of the upgraded parts used by Rex.  I’ve been waiting to see these parts re-appear since they were introduced with Rex, and I’m very happy to finally see them again.  They’re a noticeable improvement over the other body, especially in terms of the poseability on the arms, making Bly a far more playable figure than most of the other clones.  Bly uses the lower right arm, left arm, pelvis, legs, feet, and the back of the torso from Rex, a slightly modified version of the standard Phase II helmet with a visor, and a new front torso, upper right arm, pauldron, and belt.  It’s actually a fairly large number new parts, and more than I’d been expecting to see here, but they’re really nice parts, and match nicely with the pre-existing parts, as well as the source material.  It all makes for a really sharp looking figure.  The only downside is that he’s still got only one trigger finger, despite having the dual pistols, though at least in Bly’s case the dual pistols aren’t his primary weaponry, unlike Rex and Wolf.  Bly’s paintwork is pretty strong; his distinct markings are replicated, but they have been properly weathered and scarred, showing that Bly’s been on the battlefield for a while.  Bly is packed with his DC-15A blaster rifle and a pair of DC-17 hand blasters, which a fairly standard selection for a clone release, and honestly pretty good for one that uses so many new parts.

THE ME HALF OF THE EQUATION

Back in 2005, when the original Bly figure was released, I came across both him and Gree at retail, but was unable to buy them at the time.  While I was able to track down a Gree, I went many years without a single Bly in my collection, and have long viewed him as the one that got away.  I actually managed to get one a few months go…just in time for this guy to be announced.  Oh well, now I’ve got them both!  I really like this guy a lot, and he’s honestly the best clone Hasbro’s put out, and narrowly edges out Zorii Bliss as my favorite figure in this assortment.  Here’s hoping for more like Bly!

Bly was purchased from my friends at All Time Toys.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2354: Zorii Bliss

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ZORII BLISS

STAR WARS: THE BLACK SERIES (HASBRO)

“It is difficult for scoundrels to remain neutral in the war between First Order and Resistance, and Zorii Bliss and the Spice Runners of Kijimi must soon take a side.”

Though her screen time was a little more on the brief side, I was nevertheless quite a fan of Zorii Bliss’s appearance in The Rise of Skywalker.  She had a cool look, served a designated purpose in the plot, gave us a little more development for Poe, and was just a rather intriguing character.  Prior to the film, I had purchased her Vintage Collection figure on something of an impulse, but after opening I wasn’t wowed.  So, after the movie, I was definitely jonesing for a slightly better version of the character. Black Series to the rescue!

THE FIGURE ITSELF

Zorii Bliss is figure 103 in the Star Wars: The Black Series line-up, making her numerically the first of the most recent assortment of figures (and placing her directly after the last assortment’s Wedge Antilles figure).  She’s one of three Rise figures in the latest assortment, and the only actually named character of those three.  The figure stands just under 6 inches tall and she has 31 points of articulation.  The smaller Zorii’s articulation was one of my biggest issues with the figure.  There was a lot of it, but not much of it was very practical.  This figure’s articulation works out far better, and is on par with the best of the more recent Black Series offerings in terms of poseability.  In particular, there’s a ton of range on the neck and the arms, which makes her a lot of fun to get into various action poses.  The joints are well-toleranced, so she can hold stances well.  She’s also a good deal more stable on her feet than the smaller figure.  While the figure still does fall over in more extreme poses, I had a lot less trouble keeping her up for the photos for this review.  The sculpt was really the one thing the smaller Zorii had going for her, but this figure nevertheless builds on that further, taking advantage of the larger canvas to add even more detail, and to also sharpen up the details.  The helmet in particular really turns out much nicer on this version, with a more film-accurate design, cleaner lines, and the one feature missing from the smaller figure: a removable visor!  In the film, Zorii never removes her helmet outright, but she does slide the visor back a few times, giving us a glimpse of her eyes and some of the helmet’s internal structure.  The visor on this figure can be popped out, revealing a fully detailed pair of eyes, as well as some more of the helmet.  It’s a really cool feature, and I was happy it didn’t get overlooked here.  Paintwork is again an area where the smaller figure did okay, but again this one does better.  The base detailing is all clean, and the metal sections get some decent weathering to match the real world items.  The eyes use the face printing tech, so they look nice and realistic as well.  Zorii is only packed with her two blaster pistols, which is slightly light, bt the removable visor does at least off set that a bit.  It probably would have made more sense to include Babu here, but then they wouldn’t have the hook for that 3PO figure, so it’s really a catch-22.

THE ME HALF OF THE EQUATION

I was hopeful for this figure when it was shown off, because it looked a bit better than the smaller one, but I was a little apprehensive.  That lessened a bit when Hasbro confirmed the removable visor, and after getting the figure in hand she’s just genuinely a really nice figure.  She’s got one really good figure giving her a run for her money on best figure of her assortment, but it’s neck and neck, let me tell you.  Definitely the best Sequel Trilogy figure in the line, though.

I picked up Zorii from my friends All Time Toys.  If you’re looking for cool toys both old and new, please check out their website and their eBay Store.

#2353: Hot Rod

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

HOT ROD

TRANSFORMERS (HASBRO)

“Screws fall out all the time, sir.  The world’s an imperfect place.”

In the summer of 1986, Transformers: The Movie arrived in theaters, and brought with it a new cast of characters, and a new cast of celebrities to voice them.  Shermer High’s resident rebel Judd Nelson was brought in to voice the newly introduced Hot Rod, a character meant to take over as the franchise’s lead from the dearly departing Optimus Prime, much like his opposite number Falcon over on the G.I. Joe side of things.  And, just like with Falcon, it didn’t quite endear him to the fans the way Hasbro was hoping it would (I think in the long run the years have been much kinder to Hot Rod than they have to Falcon, though).  Whatever the case, being the proposed central character for the continuation of a popular franchise is pretty good spot to be in from a toy stand point, and Hot Rod was of course added to the toyline to coincide with the movie’s release.  I’ll be taking a look at that first toy today!

THE FIGURE ITSELF

Hot Rod hit shelves in 1986 as part of the heavily movie-inspired line-up for Transformers that year.  Unlike prior entries in the line, Hot Rod was not repurposed from pre-existing Japanese molds, but was instead a new creation specifically for the Transformers line, designed by working in tandem with the proposed animation model character.  The end result is something that sticks pretty close to the animation design, at least when compared to some of the other vintage figures.  In his robot mode, Hot Rod stands about 6 inches tall and he has 8 usable points of articulation.  All of the robot more’s articulation is in the arms, and that actually doesn’t include any sort of up/down motion on the shoulders, making Hot Rod by far the most limited of the four G1 bots I own in terms of poseablility.  He’s good for standing around, but that’s about it.  On the plus side, with a rather faithful to the animation sculpt, he’s got one of the nicest looking robot modes from the original line, and manages to actually nicely walk the line between the two modes a lot better than a good portion of his compatriots.  There is one running change in terms of construction for the figure.  Initial versions had metal feet, the version 2 mold got plastic feet.  Mine is a version 2 figure, though appearance-wise they’re the same.  Hot Rod’s alt-mode is a futuristic sports car from the far off year of 2005, which means he was unlike a lot of the vintage stuff, being a non-existent vehicle.  It’s a pretty sleek design though, and the transformation is a pretty slick and easy mode shift.  Hot Rod was originally packed with a pair of blasters, but mine is just the core figure.  Oh well.

THE ME HALF OF THE EQUATION

I wasn’t gonna get any more G1 Transformers.  I thought I was done.  I really did.  Then this guy got traded into All Time, and he was just kinda nifty and I had trade credit to burn through, and Max was not going to talk me out of buying a Transformer, and so here I am.  Poseablity aside, I actually really like him a lot, and he offers a nice balance of both modes, and certainly looks cool!

As I noted above,  I got this guy from my friends at All Time Toys, and a good chunk of the collection he came from is still available here.  If you’re looking for other cool toys both old and new, please check out their website and their eBay Store.