Author Archives: Ethan Wilson

#3526: Nightwing

Posted by Ethan Wilson in Reviews and tagged with , , , ,

NIGHTWING

DC MULTIVERSE (MCFARLANE TOYS)

Fun FiQ Fact #0005:  This is my second Nightwing of the week and my 21st Nightwing review in the history of the site!  They can drink now!

In case you haven’t noticed, I do like me some Nightwing figures.  I’m generally not super picky about them, at least as far as quality is concerned, which is why I tend to wind up going back to certain wells for more and more punishment.  One such well is the McFarlane well.  McFarlane has made five Nightwings thus far.  I got the first one, and I was honestly rather letdown.  So letdown that I didn’t even keep him.  I got rid of a Nightwing.  That’s gotta say something, right?  I’ve looked at all of the others as they’ve shown up in front of me, and I’ve just known I’d be disappointed again.  And now I’ve actually gone and gotten one.  Am I gonna be disappointed?  Let’s find out!

THE FIGURE ITSELF

Nightwing is part of the Titans series of DC Multiverse, which was a mass-release set of Build-A-Figure part-bearing figures, which hit mid-last year.  They’re kind of a mix of designs, mostly on the modern side.  For his part, Nightwing appears to based on his most current design from his solo book, which is actually a pretty solid look.  It’s very similar to his Hush look, but with a dash of animated thrown in.  The figure stands just over 7 inches tall and he has 35 points of articulation.  It’s the standard McFarlane set-up, which is to say it has its plusses and minuses.  It generally doesn’t break up the sculpt too awkwardly, which is a plus.  The sculpt is generally not a bad one, especially given the source.  The proportions aren’t too odd, and the detailing is mostly just what’s supposed to be there, without a ton of extra detailing that’s not needed.  I like a streamlined Nightwing, so I like this a lot more than the prior sculpts.  The head’s not bad, but it’s definitely a bit more on the cartoony side.  There’s a heck of a chin on this guy, and he’s got wonky different sized eyes.  Also, I’m not entirely sure what’s supposed to be going on with his hair.  It looks fine from certain angles but awkward from others.  Nightwing’s paint is pretty clean.  The blue is bold and eye-catching, which I like.  I don’t like that the shoulder assembly once again breaks up the blue line-work, but Todd’s not letting that particular gimmick go.  Nightwing is packed with a display stand and a card.  It’s kind of crazy that he gets no eskrima sticks, nor hands to hold them, especially with them being on the art for the included card, but that’s McFarlane.

THE ME REMAINDER OF THE EQUATION

I saw this guy’s initial photos and thought “he doesn’t look so bad.”  It wasn’t enough for me to track him down, mind you, but when one got traded in at All Time, it certainly made me contemplate buying him.  I was gonna wait it out and see where I fell, but my co-worker Mike decided to make it easier on me, and just bought it for me as a Christmas gift.  That certainly took a lot of the thought out of it.  It’s honestly not a bad figure.  I mean, not great, but I didn’t expect that.  But, within the confines of the set-up, he’s okay.

#3525: Donatello – Heroic Turtle-At-Arms

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

DONATELLO — HEROIC TURTLE-AT-ARMS

TURTLES OF GRAYSKULL (MATTEL)

Fun FiQ Fact #0004: The vintage Masters of the Universe and Teenage Mutant Ninja Turtles toylines shared a designer, Mark Taylor, who designed key portions of both lines.

I’m neither the world’s biggest Masters of the Universe fan nor the biggest TMNT fan, so you may be wondering what’s the deal with me reviewing a crossover figure from the two lines. Okay, you’re probably not, because I’m actually pretty transparent on some things, and one of them is that I like Donatello action figures. Where there are cool new Donnies, I tend to follow. Also, I do like me a nifty crossover. So, behold Man-At-Arms Donatello!

THE FIGURE ITSELF

Donatello is part of the first standard assortment of Mattel’s Turtles of Grayskull line, alongside Leo, Man-At-Arms, and Mutated He-Man. The figure stands about 4 1/2 inches tall and he has 24 points of articulation. In terms of construction, these figures are very similar to Mattel’s own Origins line, which makes a degree of sense, since it allows the Turtles to fit right in with the established MotU characters, as showcased in the included minicomic. The design brings his build more in line with the typical Masters look, so he’s a little more roided out than usual, and gets less of that typical Turtle physique. This is presumably to keep cross-compatibility between all of the figures in the line. Donnie gets his own Man-At-Arms inspired armor, which is pretty fun. I especially dig how the back shell can turn into a separate shield piece. Donnie’s color work keeps with his usual palette, but there’s clearly more purple, since that’s the main basis for the armor. I like it; it makes him stand out nicely. Donnie is packed with the 7 pieces of removable armor, plus a staff-version of the Man-At-Arms mace, and a minicomic explaining the background of the crossover. Of particular note, it features Roboto in his minicomic colors, which makes me very happy.

THE ME REMAINDER OF THE EQUATION

This whole endeavor is Max’s fault. He let me know about this crossover’s existence, and he made darn sure I got one of these, with this particular one landing in my hands just days before Christmas. He really likes to look out for me. I don’t feel the need to go in-depth for this line (but I certainly wouldn’t say no to a Roboto/Metalhead crossover), but this one figure is definitely worth it.

Mutant X Re-Read #22: The Good…The Bad…And Things Get Ugly!

Posted by Ethan Wilson in Mutant X Re-Read

THE GOOD…THE BAD…AND THINGS GET UGLY!

MUTANT X #21 (MARVEL COMICS)

“In another place–in another life–Alex Summers led a team of mutants in a battle against oppression. His methods were extreme, his tactics questionable, but–in his soul–he knew that he was fighting for the greater good.

Now that soul has been transferred to another world, and Summers, also known as Havok, has found himself living a lie, allied with a team of mutants who are sinister, parallel versions of his friends and family. It is to this dark, new place that Havok has come, where he stands as a man alone… a mutant alone. Alex Summers is Mutant X.

Fear him. Fear for him.”

25 years ago, Marvel Comics launched Mutant X, a Havok led X-spinoff. I recently came into a complete run of the series, and so now I’m going to re-read the series once a week, and you guys get to come along for the ride!

This week, Havok gets a *lot* of exposition thrown in his general direction in “The Good…The Bad…And Things Get Ugly!”

THE ISSUE ITSELF

Mutant X #21 is coverdated July of 2000, and it has story and art by Howard Mackie, Bart Sears, Tom Lyle, and Andrew Pepoy.

Jean has taken Havok to see Apocalypse, revealing to Alex that it is Xavier, not Apocalypse, who is the current threat.  Havok struggles to accept Apocalypse as an ally, but is swayed by arrival of Magneto, who it turns out was *not* killed when the X-Mansion was nuked back in issue 14.  Magneto and his X-Men were saved by Apocalypse, who has been keeping them shielded from Xavier since.  Magneto explains to Alex that Xavier started out much like his main universe counterpart, but was changed by an encounter with the Shadow King.  Xavier emerged from the encounter more ruthless.  The unintended death of Moira MacTaggert leads to a falling out between Magneto and Xavier.  Magneto threw himself into building up the X-Men, while Xavier disappeared, supposedly tracking down and turning every mutant telepath he could find, allying himself with Mr Sinister in the process.  Magneto in turn allied with Apocalypse, whose goals remain consistent with his mainstream counterpart, but have placed him opposite Xavier and Sinister.  Magneto and Jean warn Alex that Xavier wants something with Scotty, so Alex returns home.  He confronts Xavier to protect Scotty.  Xavier fights back, first attacking Elektra.  Alex pushes him back, and is aided by the Six, before Xavier rallies, armoring himself and preparing for further battle.

There’s soooooo much exposition in this issue.  It’s not bad, but it does sort of come out of nowhere, since we haven’t really been doing as much of that as of late.  That said, the series kind of needed it.  It was nice to re-check where we are.  I was also glad to see that Magneto wasn’t *really* dead, because his sudden death did feel like a bit of a waste.  I do look forward to Apocalypse potentially being an actual character of his own, rather than just the plot device he is currently, but we’ve got time for that.

THE ME HALF OF THE EQUATION

We’re again getting back into some of the territory I was already familiar with from back when this was new, since I picked up around the wrap-up to the Xavier stuff.  It’s interesting to see how it actually builds up.

I snagged this whole run from my usual comics stop, Cosmic Comix, so I want to give them a shout out here, because it was a pretty great find.

#3524: Shazam!

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SHAZAM!

SUPER POWERS (KENNER)

Fun FiQ Fact #0003:  The character that would eventually become Shazam was originally intended to be called “Captain Thunder” and “Captain Marvelous” before Fawcett Comics landed on “Captain Marvel.”

Kenner’s Super Powers has a very hard link to Christmas for me.  As a kid, for a good stretch of time, I got one every Christmas, and, in recent years, it’s a trend that’s returned.  I’m actually very close to the end of the line, which also means that I’ve gotten to the point where all of the ones I need are nearer the more expensive side of things, and also all hail from the line’s last year.  That includes today’s focus, a Captain Marvel named Shazam!

THE FIGURE ITSELF

Shazam was released in 1986, as part of the third and final year of Kenner’s Super Powers line.  While the character wouldn’t actually take on the name “Shazam” in-universe until 2011, since by 1986, the Captain Marvel trademark was firmly in Marvel Comics’ possession, so whether he used the name in the books or not, no toys could use it.  Rather amusingly, Marvel themselves didn’t really do much with it either, with their first figure based on any of *their* Captain Marvels not seeing a release until the late ’90s.  But, I’m getting side-tracked.  The figure stands about 4 1/2 inches tall and he has the line’s standard 7 points of articulation.  Shazam sported a unique sculpt, based specifically on his later DC design, which moved him more into the traditional spandex set-up.  His sculpt is a little stiffer than the others, which is especially notable in the straightness on the arms.  His head seems a bit soft compared to others in the line.  They’re clearly trying to capture the character’s more unique facial features, while keeping him in-line with the house style of the rest of the figures.  The end result is sort of middling.  Definitely not the strongest the line had to offer.  His cape was cloth.  On my figure, it’s a repro; the original had a unique plastic clasp piece, as well as some rather nice printed details.  Shazam’s paint work is minimal, but it’s decent enough.  There’s a little wear on mine, but nothing crazy.  Shazam gets no accessories, but he gets the usual action feature.  In his case it’s a “Power Action Thunder Punch;”  squeezing the legs makes the arms swing in opposite directions.

THE ME REMAINDER OF THE EQUATION

As has been the trend on the last few of these, Shazam was my main Christmas gift from my parents this year.  While Mister Miracle was one of the line’s finest, and a great send-off from the final year, Shazam is definitely more middle of the road.  He’s okay, and I’m sure glad to finally have him, but he himself isn’t much to write home about.  And now I’ve got four left.  This is getting very exciting!

#3523: Donatello – Battle Ready

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

DONATELLO — BATTLE READY

TEENAGE MUTANT NINJA TURTLES BST AXN (THE LOYAL SUBJECTS)

Fun FiQ Fact #0002:  Donatello was the favorite Turtle of TMNT co-creator Peter Laird, who modeled Donnie’s personality most closely on his own.

When I got into TMNT as a kid, alongside my brother Christian, we each had our clear favorite member of the team.  Mine was Raphael!  What’s that?  You assumed it was Donatello?  Why, just because I’ve spent ten years here on the site saying that or something?  Well, I was initially a Raphael kid, believe it or not.  Christian, on the other hand, was a Donatello fan.  By the time of the 2007 TMNT movie, however, I realized it wasn’t Raph that really spoke to me, and I’ve been a Donnie fan all the way since then (for his part, Christian settled in on Michelangelo, again a much more natural fit for his personality).  Since I’ve latched to Donnie, though, he’s become an easy target for gift-giving and the like, especially when there’s new versions that I don’t yet own.  Like, say, for instance, this guy!

THE FIGURE ITSELF

Donatello — Battle Ready Edition is part of The Loyal Subjects’ Teenage Mutant Ninja Turtles BST AXN line.  He’s based on their takes on the team’s IDW comics-based appearances.  There are two releases for each of them, with the “Battle Ready Edition” being an SDCC 2023-exclusive, which was also available on The Loyal Subjects webstore.  The figure stands about 5 1/2 inches tall and he has 29 points of articulation.  While a good number of the BST AXN Turtles are prone to sharing parts between releases, the more unique nature of the IDW designs means that this Donatello gets an all-new sculpt.  The IDW illustrations are a little more flowy and free-form with the designs, ultimately making the Turtles a little more human in appearance than they usually are.  The sculpt does a respectable job of capturing his look.  He’s tall and lanky, and gets all the proper texturing you’d expect from this particular design.  I especially dig that they even remembered to give him his artificial shell that he got later in the book’s run.  That’s a very fun touch.  Donnie gets two different head sculpts, one slightly goofy and grinny, and the other one is serious and teeth-baring.  They’re both decent matches for the source, but I do lean more towards the goofier one.  Donnie’s paint work is one of this particular release’s main selling points.  In addition to the base level work, the “Battle Ready” figures all get an extra wash to help to accent the smaller sculpted texture details.  It actually works really well, and it’s surprisingly consistent between the different parts of the figure.  Also worth noting is that the two heads get two different styles of eyes, with pupils on the goofier one, and no pupils for the more serious one.  Given the usual back and forth on the styling, it’s nice to get the option there.  Donatello is packed with three sets of hands (gripping, open gesture, and a pointer grip/fist combo), his bo staff, a pair of goggles, and his anti-gravity gauntlet.

THE ME REMAINDER OF THE EQUATION

I’ve not really messed with the BST AXN Turtles, but there’s just been more and more, and I guess it was inevitable.  The inevitability came to a head when Max got one of the fancy SDCC ones for me as the first part of last year’s Christmas gift.  It’s a different style of Donnie, and it’s a slightly different style of figure, but both elements work nicely.  I definitely dig it.

#3522: Nightwing

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

NIGHTWING

BATMAN: HUSH MAFEX (MEDICOM TOY)

Welcome back guys!  I’m…well, refreshed isn’t the right word to use for my post-Christmas break state, since I pretty much just spent the week dealing with the flu, but…it’s a week later?  Yep, that’s it.  First things first: I’ve got a bit of updating to be done.  I’ll be honest with you all, after ten years of doing the site, it’s become routine, and out of routine can come monotony.  And monotony doesn’t make for exciting writing or exciting reading.  And, if I’m not having fun here, then I ask you, what’s the damn point?  I might as well pack the whole thing up.  But I don’t wanna do that, so I’m going to tweak my formula a bit.  Namely, since I know from at least some portion of my readership, that the “Me Half of the Equation” is the bit they read first before going back to the rest if they think it’s worth it, and it’s also my favorite part to write, I’m moving it to the top.  Well, some of it, at least.  Overall assessment of the figure and post-review wrap-up will still be at the end, but the more interesting interludes are now starting things off.  Additionally, I’m going to try to give my reviews a little bit of a peppy-fun-type fact of the day, be it tied to the item’s history, or to my own, because I think that sounds fun.  And, because this is my site, I totally reserve the right to reverse the whole thing and go back to the old style.  We’ll see.  Awaaaaaaay we gooooo!

Fun FiQ Fact #0001:  Dick Grayson is not DC’s first character to use the name Nightwing; in the Silver Age, Superman used the identity while fighting crime in the Bottle City of Kandor, and eventually passed it on to his cousin Van-Zee.

A good portion of my modern DC collecting is owed to early ’00s DC Direct, and one of the most formative lines for me was Batman: Hush, based on Jeph Loeb and Jim Lee’s run on Batman.  In particular, it was the line’s second series, which featured Nightwing, which got me downright addicted.  I had the release date memorized, and I’d check DCD’s shipping schedules every week for it.  I’d ask about it at Cosmic Comix.  I had pictures saved on my desktop.  The figures haunted my dreams.  And Nightwing stood above them all.  So, when they finally *did* show up, and he was the one that was already gone when I got there, it only made the obsession worse.  Thankfully, it wasn’t a long wait for a restock, and I did get one, which I loved to pieces.  No, seriously, to pieces, because it was a ’00s DCD figure and they had the durability of wet toilet paper.  I’ve still got him, but he’s more glue than plastic at this point, I think.  Still, I do love that Jim Lee Nightwing.  And then MAFEX comes along, with they’re updates to the Hush figures, and Nightwing’s there, and there’s *literally* no way I’m missing that one, right?  Not on your life.  It was another long wait, and one that made me very much remember the wait for the original, but that’s honestly pretty appropriate, right?

THE FIGURE ITSELF

Nightwing is figure 175 in Medicom’s MAFEX line-up, and is the most current of the line’s Hush tie-in figures, though Ivy is close behind. The figure stands right at about 6 inches tall and he has 43 points of articulation. The movement here is very similar to that of Hush, albeit less restricted, since Dick doesn’t have the trench coat to worry about. It’s a very handy articulation set-up for a guy who’s a trained acrobat, so that’s a very definite plus. Nightwing sports a sculpt based on Jim Lee’s illustrations of the character from the book. Lee’s take on the design isn’t drastically different from the design that came before it, but he ditches the padding on the forearms and shins, resulting in a far more streamlined look, and one that’s, quite frankly, Nightwing’s best.  As with the other two MAFEXes I’ve looked at, the Jim Lee stylings are captured very nicely here, and in general, he makes for a very clean transition to toy form. Like the others, Nightwing gets two different heads, one calmer, and one gritting his teeth. They’re both very nice, very sharp sculpts, which really look the part. Nightwing’s color work is pretty much what it needs to be. It’s basic, but clean. The blue is appropriately bright and eye-catching, and they’ve even remembered to make the mask on both heads blue, fixing the error we saw on the Icons figure. Nightwing is packed with six pairs of hands (in fists, gripping, flat, open gesture, relaxed, and stick twirling), two standard eskrima sticks, one pair of sticks with a posable wire running between them, an alternate back piece with stick storage, and a display stand. I love all the options for the sticks, though I did have some difficulty getting the spinning ones to stay on their matching hands.

THE ME REMAINDER OF THE EQUATION

My very long wait for this guy was brought to an end courtesy of All Time Toys owner Jason, who gave me this one as a Christmas present (well, this was my more store related gift; I also got a spot cleaner for carpets, which excites me because I’m apparently an old person now). I very much enjoy him. I’ve got a lot of Nightwings, but this one is the best.

Christmas Break!

Posted by Ethan Wilson in General

Greetings dear readers! I know that I usually jump right back into reviewing post-Xmas around these parts, but I’m doing things a little differently this year, so as to preserve my own sanity just a bit. So, this year, I’ll be taking a hiatus until the new year, just to get some time to catch up on some things. Thanks for reading and I’ll see you all after the new year!

-Ethan

 

#3521: Jawa & Salacious B. Crumb – Holiday Edition

Posted by Ethan Wilson in Reviews

JAWA & SALACIOUS B. CRUMB — HOLIDAY EDITION

STAR WARS: THE BLACK SERIES (HASBRO)

Merry Christmas everybody! Do you remember that radical thing I did waaaaaaay back on Friday? You know, with the holiday themed Black Series figure? Well prepare for a reprise, because today I’m looking at a Jawa and a Salacious B Crumb.

THE FIGURE ITSELF

The Holiday Edition Jawa and Salacious B. Crumb are one of the six Holiday Edition Star Wars: The Black Series releases for 2023. This pair are a Fan Channel exclusive, and are more specifically geared towards the two-pack set-up than other figures. Also, while the Jawa is, like all the other generic characters from this subline just a Jawa, the Kowakian monkey-lizard is identified specifically as “Salacious B. Crumb.” The Jawa stands 4 inches tall and has 28 points of articulation. He reuses the standard Jawa body, which makes sense. It’s a decent sculpt, albeit one that’s a little outmoded these days, especially when it comes to posability. Still, it does what it needs to. Salacious is re-using his original SDCC-exclusive mold, which hasn’t got a ton of play. He’s a little shy of 3 inches tall and has 11 points of articulation. It’s a pretty good mold he’s using, and it replicates the puppet pretty well. Both figures get re-decoes. The Jawa has a Santa color scheme, as well as his attached blaster getting a Nerf-style color scheme. Salacious is now green, I’m presuming in a nod to the Grinch. It’s pretty striking, and it contrasts well with the Jawa.

THE ME HALF OF THE EQUATION

Since this set is a fan channel exclusive, it was exceedingly easy for me to get. On top of that, I think the Jawa’s color set up is honestly one of the best for this subset. It’s also nice to get another shot at the Salacious mold, even if it’s in an off-standard color scheme.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

 

#3520: KX Security Droid – Holiday Edition

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

KX SECURITY DROID — HOLIDAY EDITION

STAR WARS: THE BLACK SERIES (HASBRO)

Okay, so it may not quite be Christmas yet, but you know what? I’m gonna do two Christmas-y reviews this year. Of course, since Christmas Eve falls on a weekend this year, I guess I’ll just observe it today, instead. That seems fair, right?  Yeah, let’s do that!  Last year, I took a brief look into Hasbro’s Black Series holiday offerings, and that feels like a pretty easy road to go back down.  There’s even more of them this year, including today’s offering, the KX Security Droid!

THE FIGURE ITSELF

The Holiday Edition KX Security Droid is one of the six Holiday Edition Star Wars: The Black Series figures for 2023.  This one in particular is the Walmart-exclusive portion of the line-up.  As with last year’s Protocol Droid, the KX doesn’t get any sort of clever name or anything, which feels like a bit of a bummer, but it’s at least brand-consistent.  The figure stands 7 1/2 inches tall and has 31 points of articulation.  The KX is re-using the K-2SO mold, which makes sense, them being the same model of droid and all.  It helps that it remains a really strong mold, even seven years after its original use.  The only draw back to my personal copy is that one of his legs snapped off at the hip joint, which is a real bummer.  The color scheme really mixes things up on this one, going for a predominantly white color scheme, accented with red and green, which is all appropriately festive.  I especially dig the snowflakes swapping in for the Imperial Cog.  The KX is packed with a small blaster pistol, done up in Nerf-style colors, which is fun.  He also gets the requisite smaller companion figure that all of the Holiday Edition figures have gotten.  It’s another BD-1, this time decoed up in white and blue.  Not quite as overtly festive as the one that came with the Protocol Droid, but it’s still pretty nifty.

THE ME HALF OF THE EQUATION

I’m a big fan of this mold, and of the Holiday Edition concept.  That said, given how kitschy they are, I’m not hunting any of them down.  With this guy being a Walmart exclusive, I figured I wouldn’t be getting one any time soon and called it a day, but when one turned up as a trade-in at All Time, I jumped on it.  His broken hip is a real bummer, but he’s otherwise a fun, and I’m still very much a fan of this whole concept.

#3519: Nighthawk & Blur

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , , ,

NIGHTHAWK & BLUR

MARVEL LEGENDS (HASBRO)

“The high-flying Nighthawk and super-speedy Blur ally with each other and the Squadron Supreme to defend their Earth”

It’s a rarity that I get to return to a Squadron Supreme discussion.  Sure, I’ve brought the team up a few times before, but it’s always about recontextualizing what is inevitably another Nighthawk or Hyperion.  This time, I actually get to build on a set I’m already building….albeit with another Nighthawk…but that’s not the point!  There are others as well!  That’s right, the Not-Batman comes packed with a Not-Flash, The Whizzer Blur!  Let’s check them out!

THE FIGURES THEMSELVES

Nighthawk and Blur are the second of the two Fan Channel-exclusive Marvel Legends two-packs based on the Squadron Supreme.  While the first set was a fairly catch-all classic take on its characters, this set more definitively dials in on specifically the Squadron Supreme of America incarnation created by Jason Aaron and Ed McGuinness.

NIGHTHAWK

Hey, it’s Nighthawk!  The Kyle Richmond version!  Which Kyle Richmond version, you ask?  Valid.  There’s actually four separate Kyle Richmond Nighthawks, and that’s *just* the Kyle Richmond versions.  There’s another four not-Kyle Richmond Nighthawks, but they admittedly get outweighed by Kyle.  This latest Kyle is perhaps the most Batman-y of the Kyle Nighthawks, so he’s got that going for him.  Design wise, he’s kind of a greatest hits of all the Richmonds before him, which is nifty, I suppose.  The figure stands 6 1/2 inches tall and he has 34 points of articulation.  He’s built on the Vulcan body, which makes a degree of sense, since Vulcan’s supposed to be replacing Bucky Cap, and that’s what the last Nighthawk was based on.  He gets a new head and cape piece.  They seem pretty in line with McGuninness’s depiction of the character, albeit filtered through the line’s usual stylings.  The cape’s a little tricky to keep in place and kind of stiff, but it’s an improvement on the last one for the most part.  His color work is a bit darker than the last Nighthawk, which is in line with the depiction in the comics.  The molded color work is solid, and the paint application is nice and sharp.  Nighthawk is packed with two sets of hands, in fists and open, and three not-Batarangs.

BLUR

When the Squadron Sinister first appeared back in the ’60s, their Flash equivalent was re-using the name of Golden Age speedster The Whizzer, and when the Squadron Supreme came into existence a decade later, the heroic equivalent was also re-using the name.  It’s a name that’s admittedly a little on the sillier side, I suppose, so the villainous version switched to “Speed Demon,” while the heroic version took on the name “Blur” during Strazinski’s reboot of the team from the early ’00s.  Aaron and McGuinness’s version kept the “Blur” name going, albeit married to a design that’s a pretty strict update to the Silver Age Whizzer designed.  The figure stands 6 1/4 inches tall and he has 34 points of articulation.  This figure is based on the 2099 base body, with the upgraded arms and legs to remove the elbow and knee pins.  Speed Demon was built on the Pizza Spidey body, and I honestly was never entirely happy with that.  This one suits the general character set-up a lot better.  He gets a new head and belt, courtesy of sculptor Paul Harding.  The head’s a fantastic piece of work, with a nice, fun-loving grin on his face.  It feels very true to the character.  The color work is pretty clean; the black and yellow works well, and the painted elements are quite nice.  Blur is packed with two sets of hands, in fists and open gesture.

THE ME HALF OF THE EQUATION

I honestly didn’t intend to pick this set up.  I got the first pack mostly because I just wanted a Doctor Spectrum.  These two using the newer designs meant I had less attachment to them, so I was planning to pass.  But, then they announced Power Princess, meaning I’d be able to finally have *some* version of the team completed, and the more I looked at the Blur figure, the more I liked him.  Blur is the real star here for me; something about his simplicity just really works, and he’s close enough to the classic Whizzer design to work for my collecting sensibilities.  Nighthawk I can take or leave.  I prefer the Defenders costume to this one, so it’ll remain my primary version of the character.  Of course, I certainly wouldn’t say no to a first appearance costume for him.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.