Author Archives: Ethan Wilson

#3256: Sakaar Loki & Heimdall

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

SAKAAR LOKI & HEIMDALL

MARVEL MINIMATES

“In Marvel Studios’ Thor: Ragnarok, Thor is imprisoned on the other side of the universe without his mighty hammer and finds himself in a race against time to get back to Asgard to stop Ragnarok – the destruction of his homeworld and the end of Asgardian civilization – at the hands of an all-powerful new threat, the ruthless Hela. But first he must survive a deadly gladiatorial contest that pits him against his former ally and fellow Avenger – the Incredible Hulk!”

For movies prior to Thor: Ragnarok, Diamond Select’s Minimates line-ups typically relied on a mix of a couple of different retailers carrying two-pack assortments, but beginning with Ragnarok, the specialty assortment was replaced by a boxed set, augmented by exclusive two-packs at both TRU and Walgreens.  For Ragnarok, Walgreens took two exclusive packs, while TRU took one, which is the one I’ll be looking at today.  Let’s have a look at Sakaar Loki and Heimdall!

THE FIGURES THEMSELVES

Sakaar Loki and Heimdall are, as noted in the intro, the one proper TRU-exclusive set for the Marvel Minimates tie-ins for Ragnarok.  Interestingly enough, this was the second time the two characters had been packed together in the line, as they were also paired for the Dark World tie-in assortment as well.

SAKAAR LOKI

Surprisingly enough, Loki was actually the character with the most ‘mates for Ragnarok, edging out even his brother Thor, and netting one variant for each of the three release venues for the movie’s tie-ins.  This one is based on what he wears for the bulk of the movie, while running around on Sakaar.  It’s not quite as true to the character as his final battle attire, but it’s still pretty decent.  The figure is built on the standard post-C3 minimate body, so he stands about 2 1/4 inches tall and he has 14 points of articulation.  Loki’s got three sculpted add-on pieces, for his hair, belt, and cape.  The belt and cape were shared with the boxed set Loki, while the hair was a new piece shared with the civilian Loki released on the Walgreens side of this assortment.  I find the hair to be a little bit bulky for Loki in Ragnarok, but it’s generally not bad, and the cape is still one of my favorites.  Loki’s paint work is a little cleaner than his boxed set equivalent, with no major issues with slop or bleed over.  He’s also a little more colorful, which is true to the Sakaar design.  I’m not as big on the facial expression for this one, which is rather bland, and feels like it has too many lines for Hiddleston.  Loki’s only accessory is a clear display stand, which is rather on the light side.

HEIMDALL

Heimdall’s only prior coverage in the line was his Dark World release, which actually wasn’t bad, and is also his fully armored attire, which was distinctly different from his on the run look from Ragnarok.  Heimdall gets two sculpted add-ons, for his hair and for his cloak/coat.  The hair is an alright piece, though it certainly feels rather too kempt for Heimdall’s look in Ragnarok.  Where Loki’s piece seemed too bulky and long, this one feels too tame and short.  The chest piece is also…it’s just not great.  Making the whole thing one piece means that the right arm is effectively trapped in place, and the legs and waist are also pretty restricted, and on top of that, the neck can’t really do much either, so he’s just generally not really posable.  And, to add insult to injury, the piece is just flat out not accurate to the character’s look, like at all.  It’s got him wearing some sort of heavy coat and multiple layers, when in the movie he’s got a sleeveless shirt and a simple pair of pants on under the cloak.  I’m not sure if this was based on early concept art or what, but it’s just not really right, and the figure would have really been better off if this piece had just been the cloak, rather than the whole thing.  The paint work doubles down on the inaccuracy of the sculpted pieces, resulting in a kind of dull look for the figure.  Heimdall is packed with his sword, as well as a clear display stand.

THE ME HALF OF THE EQUATION

There was a whole slew of 2017 releases for Minimates that I had to skip on when they dropped, and almost the entirety of the Ragnarok line-up was on that list, this set included.  This one was snagged from TRU during the beginnings of their clearing out of their products in 2018.  Loki’s okay, but not as definitive as the boxed set version.  Heimdall is rough, I’m not gonna lie.  He’s not accurate, and he’s not a particularly fun figure either.  This set’s generally kind of weak.

#3255: Protocol Droid – Holiday Edition

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

PROTOCOL DROID — HOLIDAY EDITION

STAR WARS: THE BLACK SERIES (HASBRO)

“Protocol droids like C-3PO are vital in smoothing differences encountered by the many farflung cultures interacting on a regular basis throughout the galaxy. Most are humanoid, like the company they keep.”

‘Twas two nights before Christmas and all through the house, Ethan was reviewing something festive two days before the actual holiday because both Christmas Eve and Day fall on the weekend this year, and he’s not doing reviews those days anymore.  Okay, maybe that version’s not quite as catchy as Clement Clarke Moore’s.  But I still think it’s got potential.  Look, the point of it all is that I’m gonna do this whole holiday cheer thing.  I’m cheerful, dang it.  So, please look at this overly commercialized cash grab product review as proof.  For the cheer.  And the jolly.  Perhaps even some whimsy.  Since 1978’s “The Star Wars Holiday Special,” the Star Wars franchise has been cashing in on the holiday cheer, though on the toy side of things it’s a more recent development.  Hasbro had a solid run of one-off holiday offerings in the early ’00s, but took a bit of a breather, before returning to it in 2020 with a whole mess of themed figures under their Black Series branding.  They were each exclusive to a different retailer, and were generally a bit of a pain to track down, so I avoided most of them.  This year’s follow-ups, however, included a Fan Channel offering, and so I’m taking a look at a delightfully festive Protocol Droid today!

THE FIGURE ITSELF

The Holiday Edition Protocol Droid is one of the five 2022 Holiday Edition offerings for Black Series.  He’s a Fan Channel exclusive, and started shipping out in early November of this year.  He’s apparently got no official name, which, if I’m honest, feels like a missed opportunity.  Why no fun little in-joke with the naming?  For shame.  Oh well.  The figure stands 5 1/2 inches tall and has 21 points of articulation.  In contrast to the most recent Protocol Droids we’ve gotten from The Black Series, the Holiday Protocol is built on the first iteration of the C-3PO mold.  It’s generally not a bad mold, but this older version means that this release lacks the added elbow articulation that all figures post 4-LOM have gotten.  It’s a little bit of a bummer.  Not the end of the world, but a bummer to be sure after getting the improved arms on so many figures.  In order to mix things up and go just a tad more festive with the mold, the Holiday Protocol gets a scarf piece, courtesy of Lando. Beyond that, the change-ups are all paint.  This guy’s been done up in a variety of red, white, and green, which all feels appropriately festive.  On one hand, I’m a little sad we didn’t get any of the ugly sweater patterning that the troopers have been getting, but on the other, I can appreciate this one going with a different angle.  I do really like the striped “socks,” and this printing on the scarf is certainly a lot of fun.  Each of the Holiday Edition figures is packed with a smaller companion, and in the case of the Protocol Droid, it’s a re-decoed BD-1, who’s been done up to match the Protocol Droid.  He’s the same mold as the Fallen Order releases, which is honestly a pretty great mold, and he’s probably my favorite thing about this set.

THE ME HALF OF THE EQUATION

I’ve passed on the other Holiday figures up to now, since, as I touched on in the intro, I didn’t really feel like hunting them down.  This year was pretty much the same deal, but since this one was going through Fan Channels, I had the opportunity to get one through work.  I don’t know that he’s really my preferred of this year’s offerings, but he was easy to get, and that’s really what matters, right?  The main droid’s okay.  He’s kitschy and goofy, but that’s what I expected.  BD-1 kind of steals the show here, but that’s just kind of the history of that mold, now isn’t it?  And that’s all I got until after the holiday.  Have a good one everybody!

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

 

Flashback Friday Figure Addendum #0019: Han Solo

Posted by Ethan Wilson in Flashback Friday Figure Addendum and tagged with , , , ,

HAN SOLO

STAR WARS: THE BLACK SERIES ARCHIVE (HASBRO)

Check this out!  Doing three whole Flashback Friday Figure Addendums in one year!  I haven’t actually done that since I launched them in 2017.  Weird.  It’s once again a Black Series figure that’s getting the treatment, thanks to Hasbro going back and redoing a lot of the pre-face-printing figures with the appropriate upgrades.  The last few I’ve looked at have been from the main line, but today I’m switching over to their Archive line, with my first Archive figure that I actually got the first time around.  So, let’s look at The Force Awakens Han Solo, whose original release I looked at back in March of 2016.

A lot of (very much deserved) praise has been heaped on the new cast members introduced in the Force Awakens, but one of the coolest things about the movie was the return of some of the “old guard” from the Original Trilogy. The most prominent returning hero by far was everyone’s favorite scuffy-lookin’ nerf-herder, Han Solo. For a number of reasons, Han, along with most of the other returning characters, was absent from the first few waves of Force Awakens product, but the merch based on him is starting to hit in full storm. Today, I’ll be looking at his much anticipated Black Series figure.

THE FIGURE ITSELF

Han was released in the fifth series of the latest iteration of Star Wars: The Black Series. He’s marked as number 18 in the line, which makes him the last figure in this particular series numerically. The figure stands just over 6 inches tall (which is the same as his A New Hope figure) and has 27 points of articulation. Some of the movement, most notably his hips, is a little restricted, but he can certainly pull off just about any pose that the real Harrison Ford can. Han’s sculpt is totally new, and it’s an amazing piece of work. The proportions look great, certainly better than the last Han, and the detail work on the clothing is just fantastic. The jacket in particular has some amazing texture work, which adds a lot of character to the figure. The shirt and underlying belt are a little on the soft side, and I’m not sure I’m a fan of the pose on his left hand, but those are my only real complaints. The real draw of this sculpt is the likeness. Harrison Ford has a notoriously hard to capture likeness, but this is perhaps the best one we’ve ever seen. There are a few angles where it looks a bit off, but the overall appearance is very close. Now, you may be thinking that, based on the pictures, he really doesn’t look as close as I’m saying. Well, here’s where the paint comes in. For the most part, the paint’s great. The clothing (particularly the coat) has some really great work, which really sells this as a real person. My first nit is the eyes; they aren’t terrible, but they’re a little sloppier than I’d like. However, the major issue here is the hair. The application of the paint is alright, but there’s no getting around the fact that it’s simply the wrong color. Instead of being mostly grey with maybe a few streaks of light brown, it’s light brown with just a few streaks of grey, resulting in him looking a fair bit younger than he should. It’s really annoying, because it seriously throws off an otherwise really great figure.* Han only includes one accessory: his signature blaster, which is a totally different mold than the one included with the Series 2 Han.

THE ME HALF OF THE EQUATION

When I found out this figure was hitting stores, I was anticipating him being a chore to find. So, I was pleasantly surprised to walk into my local Target and find him hanging on the pegs, hiding behind a pair of Jango Fetts. I’m not sure I can adequately describe just how much I like this figure. He’s hands down the best Han Solo figure I own, and possibly one of the best Black Series figures to date, and certainly the best of the Force Awakens figures. Yes, the hair thing is annoying, but this figure outshines all those issues, and is just a ton of fun to mess around with.

I think, perhaps, the most dated part of the whole above review is how Jango was the figure I was pushing aside to find this guy.  Believe it or not, when this series hit, the Prequel resurgence hadn’t quite hit in full force yet, and, with the general hype machine that was still going behind The Force Awakens, Han was actually the more desirable figure.  How times have changed on that one.  Beyond that little diatribe, my review of this figure is pretty spot-on, I think.  This was definitely Hasbro’s best Han Solo sculpt for the line at the time, and even now is still a pretty high contender.  I think he gets edged out by Bespin Han, but that’s really it.  I was critical of the original figure’s paint, and clearly that’s the one thing Hasbro wanted to fix, so I must have been onto something there.  And fix it Hasbro did.  The new paint is absolutely night and day.  There was apparently some sort of contractual thing preventing the hair on any Han Solo merch from being a proper grey when it all hit in 2016, but it would appear that’s been lifted, and this figure’s all the better for it.  The new face paint is also perhaps the best upgrade from the entire line, and they’ve even improved on the already high quality paint on the body.  He’s really just an all-around win.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3254: Cobra Viper Officer & Vipers

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

COBRA VIPER OFFICER & VIPERS

G.I. JOE: CLASSIFIED SERIES (HASBRO)

Does this count as the eighth entry in the Day of the Vipers if that day actually wrapped up four years ago?  Eh, I’m gonna count it.  I love me a continuing bit.  So, for Part 8 of the exceedingly long Day of the Vipers, we’re jumping to the far-flung year of 2022.  Woooo.  The future is now.  After revamping the brand and moving to a 6 inch scale in 2020, Hasbro added an updated Cobra Viper to the line in the form of a rather impossibly hard to find Target exclusive, which hit in early 2021.  It was decidedly not so much fun for the fanbase.  To make it decidedly more fun for the fanbase, Hasbro decided to follow-up the initial Viper with a whole pack of Vipers.  I am much excite.  Very much excite.

THE FIGURES THEMSELVES

The Cobra Viper Officer and Vipers three-pack is a stand alone release for G.I. Joe: Classified Series, and is numbered 47 in the line-up, fitting the continuing trend of absolutely nothing in the Classified Series going un-numbered.  It’s still kind of amusing to see it on such a large-boxed item, though.  The pack includes the Officer and two rank and file Vipers.  All three are built on the same sculpt as the Target-release Viper, with the Officer receiving a complete paint overhaul and the two Vipers getting some minor tweaks.  Of note, all three uses of the mold have a slightly different composition on the plastic for the goggles, so they fit a little bit better than the first release.

The Cobra Viper Officer is actually a rather new concept, since the Vipers have classically been seen as the lowest on the totem pole, meaning their commanders would just really be any other Cobra officer.  When the Viper molds were re-purposed to be a Cobra Officer and a Cobra Trooper in 1998, Hasbro added a little bit of ranking with the colors, but not officially applied to Vipers proper.  Our first taste of the concept for Vipers originated in 2006’s Viper Pit set, which amongst its six Vipers included one with a golden face plate, albeit with no denotation of any added rank.  In 2014’s 50th Anniversary line, we got our first proper Viper Officer, who got not just the changed face plate, but a whole new color scheme as well.  That figure seems to have served as the primary inspiration for the figure seen here, though they do both seem to take at least a page out of the 1998 Cobra Officer’s book in terms of coloring.  The figure stands 6 1/4 inches tall and he has 35 points of articulation.  Since the sculpt is the same as the first release, the main change-up here is the colors.  This guy pretty much just copies the 50th color scheme, translating the officer to primarily light grey, with some red accenting, as well as the expected gold for the visor.  The application is generally pretty clean, though there’s some fuzziness on some of the change-overs, as well as a bit of slop at the edges of the forearms.  The depth of detail on the paint is also a little more involved than on the prior figure, with things like the lenses of his goggles getting their own coloring as well, which gives him a little extra polish.  The Officer gets the same scarf used on the Target figure, as well as a backpack in an updated color scheme, and a unique pistol, which even has a port at the front for effects pieces.

Backing up the Viper Officer, there are two lower tier Vipers.  By design, they’re meant to be interwoven with the Target-exclusive release, allowing those who already got some of those to not have to start over from square one.  Exactly how well that works is up to some debate, though.  There are a few little changes, not just from that release to this one, but also between the two figures in the pack together here, as well.  As with the Officer, these guys share their construction with the standard Viper, with their color scheme being the differentiating thing.  These two are very similar to the standard Viper, but the reds and blues are both shifted to be a little less saturated and just a touch darker.  It’s nothing major, and something that can be easily missed when not comparing the releases side by side.  But, if you’re some sort of weirdo that has to have every possible version, well, I guess you’ll see it.  The application is largely consistent with the prior release, but there’s the extra detailing again on the goggle lenses, to match up with the Officer.  I really like it.  While the standard Viper, as well as all prior Vipers from the brand up to this point, stuck with a consistently lighter skin tone, this set adds in just a little bit of diversity to the Cobra ranks, with one of the two Vipers sporting a noticeably darker pigment to his neck and forearms.  The other Viper is *supposed* to be lighter skinned, but, well, that’s not exactly how it worked out.  The neck is the intended color, but the forearms are the same darker brown as the other guy, meaning his skin tone doesn’t match.  I at first thought it was a fluke on my set, but after checking out a few additional sets, it appears this is an across the board issue for this release.  It’s not the end of the world, since the forearm bracer’s totally hide the issue, but it’s frustrating that you don’t get the option to go sans-bracers, since that’s kind of my preferred look.  Both rank and file Vipers are packed with the scarf, the back pack (with slightly tweaked colors), and the same sidearm as the Target Viper.

In addition to the parts that are clearly tied in with each of the specific figures in the set, there are also a selection of accessories that can go with any of the three.  There are two of the rifle included with the Target Viper, three different styles of more realistic assault rifle, a silencer, and nine different blast effects, which can be fitted onto all but the standard Viper sidearms.  The extras here are really great, because they do a great job of selling the army building potential, given how many options there are here with weaponry.

THE ME HALF OF THE EQUATION

Have I mentioned that I really like Vipers?  Because I do.  I was not thrilled about the first one being a Target release, since it made doing any sort of army building pretty much impossible.  By a stroke of luck, I got two of those, but I was certainly not counting on getting any more.  I was very happy when this set was announced, and I like being able to just get a squad in one swoop.  The Officer’s a fun concept, and I like his uniqueness.  The two standards are just different enough to be different.  I do like the new colors and the improved paint apps, as well as all the cool new goodies.  I’m not thrilled about the mix-up on the one Viper’s forearms, and I’m curious to see how that pans out in the long run, and if Hasbro chooses to address it in any way.  I’m not expecting it, but I’m curious.  As it stands, that’s my one flaw on a set I otherwise really, really like.

Thanks to my sponsors at All Time Toys for setting me up with these figures for review.  If you’re looking for toys both old and new, please check out their website.

#3253: Ghost Rider

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

GHOST RIDER

MARVEL LEGENDS (HASBRO)

“Wielding supernatural abilities and weapons from the back of his flaming motorcycle, Ghost Rider roams the mortal world as the Spirit of Vengeance.”

I don’t review enough Ghost Rider stuff around here.  I probably should review more.  Honestly, It’s kind of crazy how the last two Ghost Rider reviews I wrote were in 2020 and 2019, and were neither one a “standard” rider.  In the fallout of the Engine of Vengence Haslab not making it, there’s at least a tiny glimmer of Ghost Rider hope out there.  Since it’s the character’s 50th anniversary and all this year, we’ve got a few small offerings to tie-in, including today’s focus, which is a Legends release that throws back to Toy Biz’s line from the ’90s…sort of.  I’ll get to that.  Let’s check him out!

THE FIGURE ITSELF

Ghost Rider is a standalone Fan Channel release for Hasbro’s Marvel Legends line.  He was initially slated for a March 2023 release, but like a lot of items recently, he moved up considerably on the timeline, starting to hit in November.  He’s the first figure to sport the retro Ghost Rider packaging, though time will tell if there will be more going forward.  Though the packaging may be retro, the figure in the packaging doesn’t really directly correspond to any particular figure from the old toy line. Instead, he’s kind of an amalgamated sort of design, which ultimately makes him actually more of a throw back to the very first Legends Ghost Rider.  The figure stands about 6 1/2 inches tall and he has 30 points of articulation, which still includes that awesome moving jaw.  This guy’s a complete parts re-use of the Rhino Series Ghost Rider, who was himself using a good number of parts from the A.I.M. Soldier.  The whole thing’s been re-used once before, for the first Legendary Riders release of the character.  It’s a very good classic Ghost Rider sculpt, and one that still holds up really well even 7 years after its initial release.  Some of the articulation’s a little bit stiff, but for the character, it all works pretty well.  This release changes up the color scheme a bit; while the last two releases both stuck rather closely to the ’70s color scheme, this one sort of merges that look with Danny Ketch’s usual color layout, by going for a more straight black on the jacket, and grey for the pants.  The skull is now far starker white compared to the flames around it, and we even get the appropriate paint work to show off the bones of his neck.  The Rhino Series Ghost Rider was notably without any extras beyond the Build-A-Figure piece, but this one gets a fair number of extras, adding in the chain whip from the Riders release, plus two flame effects for the arms, and an all-new alternate head and hands (sculpted by Paul Harding).  The new head depicts Johnny mid-transformation, which is a ton of fun, and the new hands show off his skeleton hands sans gloves.  It makes for some really fun posing options.

THE ME HALF OF THE EQUATION

I passed on the Riders version of Ghost Rider because I was content with the first release of the mold and didn’t feel like I needed a re-paint.  I was initially planning to do the same with this guy, but then I saw all the new parts he came with, and rethought it.  The prior version still remains my definitive, but boy are the extras a lot of fun on this one.  It really takes him to the next level.  Now, can we please get a proper Danny Ketch?

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3252: Beast

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BEAST

MARVEL LEGENDS (HASBRO)

“Dr. Henry McCoy, the gentle giant of the X-Men, uses his mutant physicality and genius mind for the betterment of humans and mutants alike.”

Back in 2019, Marvel Legends was taking its first real stabs towards completing the core ’90s X-Men line-up for the first time.  We got a Beast back then as part of the Caliban Series, and he and the Jubilee from the same series were legitimately always impossible to find.  There was a grey Beast variant later to alleviate the issue a little, but it definitely wasn’t the same thing.  As we add more to that ’90s line-up, a proper re-release of some sort kind of feels more and more inevitable.  And here it is, being all not evitable.  So, now we’re getting another go at the ’90s Beast.  On the plus side, this one’s aiming to not just get the prior one back out there, but also make it even better in the process.  Does it do it?  Let’s find out!

THE FIGURE ITSELF

Beast is his own Fan Channel-exclusive single-offering for Hasbro’s Marvel Legends.  He’s under the Retro Collection banner, with a fun throwback card inspired by the early ’90s Toy Biz stuff.  This is the second time Beast’s been done under this banner, following the Grey Beast from 2020.  This one is, of course, more true to what Toy Biz actually put out back then.  He’s also not at the same price-point as prior versions, being in the mid-tier price between standards and deluxes, first done with Iron Spider.  This allows him to go just a little bit heavier on the accessories, and also keep his size and original core parts, which all feels like a win to me.  This Beast is, of course, very much a Jim Lee ’90s Beast in terms of design, fitting in with a lot of the other focus as of late, and loosely fitting with the VHS packaged figures, though without the specific cel shading set-up.  The figure stands about 7 inches tall and he has 36 points of articulation.  For the most part, this figure shares his sculpt with 2019’s Caliban Series Beast, which is exactly what we all expected, and is really just the aim of the figure.  It’s a solid piece of work, and a base that’s only gotten four uses at this point, so it’s not at all a bad choice.  He does get an all-new head sculpt, courtesy of Paul Harding, which gives us a far more calm and collected Hank McCoy than the first sculpt.  I was always kind of iffy on that one’s screaming look, so I definitely appreciate this one; it’s still perhaps a touch serious for my personal preference, but that also distinguishes it more from the Grey Beast head, as well as sticking pretty close to the original Toy Biz figure.  Beast’s color work is similar to the Caliban release, but ever so slightly changed up; the main blue is a ever so slightly lighter in shade, and the accenting is much subtler than before.  I liked the prior one for the time, but this coloring definitely is an improvement.  The biggest change-up for this release is the accessory selection.  He’s been moved to a higher price point, and to justify that, he gets not only the two sets of hands from the original release, but also the original release’s head, a cloth lab coat, Grey Beast’s glasses, and two different beakers with different color liquids in them.  It’s a great selection of extras, and I especially love the “X-Gene” label on the pink beaker.

THE ME HALF OF THE EQUATION

I was overall happy with the first release of this mold back in 2019, but in the years since, I’ve really grown to dislike him being saddled with the one head sculpt that he got.  Add in that he was so hard to find, and didn’t quite fit with more recent releases, and it all comes together as a definite need for some sort of update.  I honestly wasn’t expecting something this involved, honestly, but I really can’t knock it.  This figure takes the 2019 figure and just makes it emphatically better in ever sense.  He’s finally a Legends Beast that I don’t feel is some sort of compromise!

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for toys both old and new, please check out their website.

#3251: Gladiator Hulk & Valkyrie

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

GLADIATOR HULK & VALKYRIE

MARVEL MINIMATES

“In Marvel Studios’ Thor: Ragnarok, Thor is imprisoned on the other side of the universe without his mighty hammer and finds himself in a race against time to get back to Asgard to stop Ragnarok – the destruction of his homeworld and the end of Asgardian civilization – at the hands of an all-powerful new threat, the ruthless Hela. But first he must survive a deadly gladiatorial contest that pits him against his former ally and fellow Avenger – the Incredible Hulk!”

In order to really maximize the depth of characters covered, Thor: Ragnarok‘s Minimates line-up split itself amongst a number of venues.  There was a core boxed set at specialty, and then the rest went to TRU and Walgreens.  In order to properly spread the heavy hitters around, Valkyrie and Hulk, who were both absent from the main boxed set, found themselves distributed in two-pack form.  I’m taking a look at that particular two-pack today!

THE FIGURES THEMSELVES

Gladiator Hulk and Valkyrie were one of the two carry-over packs for the Thor: Ragnarok tie-in line up of Marvel Minimates.  While the other carry-over pack, Thor and Hela, was also available as part of the boxed set, Hulk and Valkyrie were available only in the store-exclusive line-ups.

GLADIATOR HULK

Ragnarok‘s role for Hulk partially adapts his “Planet Hulk” storyline from the comics, which includes his time as a gladiator on Sakaar, a rather distinctive look for the character.  That was, of course, the look that served as the basis for all the tie-in merch, which certainly made a lot of sense.  The figure is using the standard ‘mate body, so he’s technically starting out at 2 1/4 inches tall with 14 points of articulation.  That being said, the extra parts on this guy wind up removing the ankle movement, while also granting him an extra half inch of height.  Hulk has 11 sculpted add-on pieces, for his helmet, chest cap, upper arms, hands, thighs, feet, and torso extender.  The upper arms, thighs, and torso extender are all re-used from previous bulked up releases, while the rest of the parts are all-new to this particular figure.  The sculpting is generally pretty good, and certainly consistent with other bulked up figures.  He’s definitely falling more into that realm of a little bit over sculpted and busy for my personal taste on Minimates, but he’s not awful.  The paint work on the figure is about what you’d expect.  With as much sculpting as there is, most of the paint is base coverage, with limited detail line work.  What detail line work is there, however, is pretty sharp, and I especially like the white markings on the skin.  Gladiator Hulk is packed with an alternate hairpiece (a re-use of the Zombie Hulk piece), his hammer an axe from the arena fight, and a clear display stand.

VALKYRIE

Making her debut in the MCU side of the line, and getting her first Minimate since 2007’s Defenders boxed set, Valkyrie was certainly a welcome addition in this set.  She’s based on her early in the film look, which is consistent with the design choices for most of the others from the line, barring only the alternate Loki from the boxed set.  Valkyrie makes use of three add-on pieces for her hair, cape, and belt/skirt.  All three pieces were new for this release, and they do a respectable job of capturing the design of the character from the movie, and translating that into ‘mate form.  The paint work on the figure does most of the heavy lifting here.  There’s a fair bit of small detail work, especially on the costume’s darker sections, which get a lot of highlights detailing.  The face does seem a tad generic for Tessa Thompson, especially the expression, but it’s not terrible, I suppose.  Valkyrie is packed with her sword Dragonfang (a new sculpt for this release) as well as two knives, and a clear display stand.

THE ME HALF OF THE EQUATION

I slept on a lot of the 2017 minimates, so I didn’t actually wind up getting this one until TRU started clearing stuff out in 2018.  I picked up a lot of Minimates that way.  I may have been part of the problem, I suppose.  Gladiator Hulk is a strong take on a unique design.  Even removed from the movie, he’s still got some validity to him.  Valkyrie is a character that’s far too scarce in Minimates, so it’s nice that the movie at least got her one more.  She’s a little more basic, but there’s nothing wrong with that.

#3250: Wonder Woman

Posted by Ethan Wilson in Reviews and tagged with , , ,

WONDER WOMAN

FIRST APPEARANCE (DC DIRECT)

“Princess Diana emerges from her native land of Paradise Island to battle evil in 1941’s All Star Comics #8, the Amazon princess Wonder Woman has become one of comics’ best recognized icons!”

After we got a couple of well-established male costumed heroes in the late ’30s/early ’40s, it was only fair to let some of the women in on the action.  So, DC Comics, then National Publications, got right on that.  Things changed in November of 1940, with introduction of the very first female super hero: Ma Hunkel, the Red Tornado.  Oh, did you think I was discussing Wonder Woman?  No, not yet.  In June of 1941, the numbers doubled with the introduction of a second female super hero: Shiera Hall, Hawkgirl.  Sorry, at this point, I’m really just messing with you.  Wonder Woman wound up as third to bat, arriving in October of 1941, as part of one of the features in All Star Comics, before moving to her own book, Sensation Comics, just a few months later.  She’s of course been a little more enduring than the other two over the years, and was quickly elevated to being one of DC’s big three alongside Superman and Batman, a role she’s remained in for most of her run.  Today, I’m looking at a figure based on her very first appearance.

THE FIGURE ITSELF

Wonder Woman was released in Series 1 of DC Direct’s First Appearance line, alongside Batman, Flash, and Shazam.  This was the second Golden Age version of the character released by DCD, following a less style-specific version from their JSA line.  The figure stands about 6 inches tall and she has 14 points of articulation.  She’s the most articulated of the line’s first assortment, getting the extra swivels at the biceps like Batman, but also getting a waist joint, which most figures in this line lacked.  The articulation allows her to actually do some of her bullet deflecting poses, which is always nice to see on a Wonder Woman.  The figure’s sculpt was an all-new one, and it’s actually quite a nice one.  They capture the art style of her early appearances quite well, and she’s just a very attractive figure overall.  For the first couple of series, the First Appearance line did a little bit of soft goods work on most of the figures, and Wonder Woman was one of those.  In her case, it’s her shorts, which allows them to have the proper looser fit.  They’re a little baggy and bunchy, but generally look the part.  They also can be removed, and there’s a smaller pair of shorts beneath them, if you’re not into the mixed media thing.  Wonder Woman’s paint work is bright, bold, and clean, and matches well with her colors from the comics.  I particularly like the highlighting on her hair, which helps to really sell the extra details on the sculpt.  Wonder Woman was packed with her lasso of truth, a display stand, and a reprint of All Star Comics #8.

THE ME HALF OF THE EQUATION

When this line was first hitting, I was still in middle school, so my purchases for such things were far more limited.  It was the Batman figure, of all things, that caught my eye, since he was more unique at the time, so that was where my money went.  I got more of Series 2 by virtue of it being right around Christmas time, but by that point Series 1 was pretty much gone, and I was focusing on the next thing.  I wound up getting this figure last year, while helping a family friend downsize their collection.  This one was in the batch to go, so I made an offer on her and added her to my collection.  She’s a really good figure, especially for the time.  I never thought much of her when she was new, but I really like her now that I have her.

#3249: Iron Patriot

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

IRON PATRIOT

MARVEL STUDIOS: THE INFINITY SAGA DLX (THREE ZERO)

In the comics, the name “Iron Patriot” was first taken up by Norman Osborne, during his time as leader of the Dark Avengers, during “Dark Reign.”  With Steve Rogers dead and Tony Stark on the run, Norman repurposes their gimmicks into one leader for people to rally behind, before his eventual undoing  His design actually took some of its cues from a concept Captain America armor that was floated about as part of a proposed alternate ending for “Civil War.”  When it came time to adapt the concept into the MCU, Osborne was still off limits, so Iron Man 3 gave the Iron Patriot monicker to James Rhodes, as part of a rebranding by the US government to make his War Machine persona a little friendlier.  While it’s clearly meant to be a little goofy in-universe, it’s still very much a fun design, and one that the comics even made use of for a brief time.  There was a little bit of toy coverage for the look back when Iron Man 3 came out, but more recently ThreeZero’s started up a line of their own 1/12 scale Iron Man armors, and Rhodie in his Iron Patriot armor is their latest offering!

THE FIGURE ITSELF

Iron Patriot is the third figure under the DLX branding for ThreeZero’s Marvel stuff, following up on the Mark 43 and the Hulkbuster.  Thus far, everything’s falling under a larger “Infinity Saga” banner, and they’re presumably looking at offering armors from most of the movies.  The figure stands just over 7 inches tall and he has 43 points of articulation.  In terms of sizing, at over 7 inches tall, Patriot feels a little over-sized for a 1/12 line, but he appears to be consistent with the scaling on the Iron Men we’ve gotten so far from ThreeZero.  So, they’re at the very least keeping an internal consistency.  He’s also close enough that you can probably fudge him into smaller scale displays.  The articulation scheme is, like a lot of ThreeZero figures, designed with a lot of smaller moving parts that aid in moving larger pieces a greater range.  The flaps of the armor can move up and out of the way for the arms and legs, allowing for a slightly better motion.  The joints are still very tight, and you have to be careful with them while posing, but it’s honestly a pretty good set-up.  The figure’s sculpt is quite an impressive recreation of the design from the movie.  It’s a mix of plastic and diecast metal, which gives him a decent amount of heft.  The outer plates are all plastic, which allows for a slightly sharper detailing, and a slightly better depth of quality to said detailing.  Iron Patriot’s paint scheme is pretty nicely handled.  It’s certainly an eye-catching palette, and the application is all very clean.  In particular, the markings and writing on the armor are a really good touch, and they’re very sharply defined.  Iron Patriot is packed with six different pairs of hands (fists, two different styles of open gesture with spots for blast effects, and the same two styles without the spots for the blasts), a saluting hand for his right side, his shoulder cannon (which is articulated itself), two different styles of forearm plates (closed up and with the rockets out), four different blast effects, and a display stand.  He also has a light-up feature in both the head and torso.  The eyes are kind of dim on my figure, but the arc reactor is nice and bright.

THE ME HALF OF THE EQUATION

For the most part, I’m pretty much content with Legends for my Iron Man armors, especially of the MCU variety.  I got to see the MK 43 and the Hulkbuster from this line in person, though, and they were definitely cool.  This particular Iron Patriot design is one I’ve really liked ever since IM3, plus it kind of vibes with all my Cap stuff, so when it was announced I put myself down on the list for one through work.  I’d honestly forgotten about him by the time he came in, but he did, and I certainly wasn’t going to pass up on him.  My initial reaction was that he was cool, but I wasn’t sure he was great.  After messing with him a bit more, I’m actually a lot more impressed with him than I initially was.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#3248: Dark Trooper

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

DARK TROOPER

STAR WARS: THE BLACK SERIES (HASBRO)

“Hulking Imperial combat droids with gleaming black armor and powerful jet boots, the Dark Troopers are a powerful design.”

When last I reviewed a Dark Trooper figure, back in February of 2021, the concept had finally made it live action, courtesy of The Mandalorian‘s second season, which saw them serve as the muscle to Moff Gideon going into the show’s season finale.  It’s been almost two years, but I’m finally following up that review of the Expanded Universe version with a look at a proper show version.  That’s just crazy, isn’t it?  Well, at least we’re finally here.  So, without any further waiting, here’s another Dark Trooper figure!

THE FIGURE ITSELF

The Dark Trooper is the 28th figure in the Mandalorian sub-line of Star Wars: The Black Series‘s Phase IV incarnation.  This figure is another deluxe-sized release, the sixth within this particular sub-set.  As with all prior deluxes, he’s shipped on his own, which is honestly pretty solid for the purposes of army building and the like.  The figure stands 6 1/2 inches tall and he has 33 points of articulation.  The Dark Trooper sports his own unique articulation scheme, removed a bit from other Black Series figures, barring really only K-2.  It’s generally a pretty good set-up, though I did find the butterfly shoulders a little spongey on my copy, and his knees can’t get a full 90 degree bend.  Other than that, though, there’s a good movement set-up.  The Dark Trooper’s sculpt is an all-new offering, and it’s mostly really good.  The overall appearance is a good recreation of the design as seen on the show, and it works well with the articulation scheme, making it all look really slick and sleek.  The only thing I’m not crazy about is the torso; rather than a solid sculpt, he’s got a sleeve over the torso for his upper armor.  While I don’t totally hate the concept, since it allows for a little more depth, the fact that it’s a softer plastic and it’s also a free-floating piece makes the figure as a whole feel a little less solid than he should.  It does at least look the part, though, and I’m not worried that it’s going to fall apart or anything.  The figure’s color work is on one hand very basic, but on the other exactly what it needs to be.  He’s predominately molded black plastic, albeit with that super shiny finish that all the Dark Troopers sported in the show.  There are a few little spots of accenting, which give him just a little bit more pop, and the application is generally pretty cleanly handled.  The Dark Trooper is packed with two sets of hands (gripping and fists), a rifle, and two blast effects pieces.  The blast effects without any sort of flight stand do seem a bit superfluous, but they’re better than getting nothing at all, and do at least help to disarm the sting of the higher price-point on this guy.

THE ME HALF OF THE EQUATION

The Dark Troopers are a fun concept that combines Stormtroopers and droids, so it’s one I’ve always been able to get behind.  I was excited when the show first hinted at them, and even more so when they actually showed up in the show proper.  I knew the figures were a lock, so it was just the waiting game at that point.  Now the wait’s finally over, and the final figure’s not perfect, but he’s still really, really cool.  It’s a great starter version of the figure, but I’d love to see maybe some damaged variants or even one with the charging station at some point in the future.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.