Category Archives: Reviews

#1688: Tuskador

Posted by Ethan Wilson in Reviews and tagged with , , ,

TUSKADOR

MASTERS OF THE UNIVERSE CLASSICS (MATTEL)

“Mighty Tusked Galactic Warrior”

Tuskador!  It’s Tuskador!  ….Who’s Tuskador?  Boy, is that a good question.  Well, he’s from the New Adventures of He-Man, an iteration of the franchise I have no direct interaction with.  I’ve never seen a single episode of the cartoon, and I own none of the toys.  Or, at least I didn’t, until now that is.  Tuskador was one of the heroic characters, and seems to have followed somewhat in the vein of Ram-Man from the original series.  So, uh, here he is?

THE FIGURE ITSELF

Tuskador was released during the 2016 year of Mattel’s online-exclusive Masters of the Universe Classics line.  He was one of the line’s oversized figures, and was also a Collector’s Choice item.  He was also the final figure to ship from the Matty Collector-run version of the line, so there you go.  The figure stands 7 inches tall and he has 21 points of articulation.  Structurally, Tuskador uses the same starting point as Ram-Man, which I’d say is most of the reason he got made in the first place, since Mattel is all about re-use potential.  Direct re-use is limited to the arms and torso, with the rest of the parts on this figure being modeled on older parts but technically new.  In order to facilitate the re-use, Tuskador has been bulked up a bit more from his prior appearances, at least from what I can find of him online. The new pieces fit the more cybernetically-advanced design aesthetic of the New Adventures characters, which helps to keep him well-separated from Ram-Man.  He’s definitely a hefty figure, and his armored elements are well-sculpted, with lots of sharp detail work.  His helmet can be removed, which causes it to sit a little funny.  On the plus side, the underlying head is one of my favorite aspects of the figure.  His astronaut-inspired cap is a fun touch, and there’s something undeniably cool about his grizzled and wrinkled face.  Tuskador’s color scheme is heavy on the blues, which works pretty well, as does the gold.  The application is all pretty clean; paint on these items was at the very least superior to Mattel’s various retail offerings.  Tuskador is packed with his titular tusks, of course.  There are two lengths included, with a more modest pair and a more ridiculous pair.  Both are fun, and you can store the pair not in use on his back if you so choose.  He also includes a big blaster, which can be held or kept on his belt.  It’s annoying that he doesn’t have a trigger finger on his right hand, but if it were perfect, it wouldn’t be Mattel.

THE ME HALF OF THE EQUATION

By 2016, I’d completely bailed on MOTUC.  For the most part, the characters I’d wanted had been done, and Matty Collector was just too much of a hassle.  When the line ended, I really paid it no mind, and I moved on to other things.  So, why do I have this figure?  Super Awesome Girlfriend.  The Gamestop where she works got this guy in, she saw the logo on the box and knew I liked Masters of the Universe, so she bought him for me.  I’ve got no prior attachment to the character, nor can I say his design compelled me to track him down on my own.  With that said, he’s actually a pretty fun figure, and a nice counterpart to Ram-Man, who’s one of my favorite figures in the line.

#1687: K-Tron

Posted by Ethan Wilson in Reviews and tagged with , , ,

K-TRON

VALERIAN: CITY OF A THOUSAND PLANETS (NECA)

“The combat androids serve as the police force on Alpha, the city of a thousand planets.  The anti-riot force is durable, unstoppable and extremely precise.  K-Trons have a reputation for ruthless efficiency,  A light on the robot’s head offers two responses to any given issue: blue means “move”; red means “target elimination.”  With concentrated cobalt armor, they are practically indestructible.”

Valerian: City of a Thousand Planets falls into that category of movies that I totally meant to see but just haven’t gotten around to watching yet.  I’ll get to it eventually.  Of course, that hasn’t stopped me from being interested in the toys.  NECA picked up the license for the film, and put out three figures, including today’s offering, K-Tron.

THE FIGURE ITSELF

K-Tron is part of the first (and it would appear, only) series of NECA’s Valerian line.  The figure stands 8 inches tall and he has 34 points of articulation.  K-Tron’s articulation is mostly pretty good, with the only real restrictions being on his shoulders, which are a little tight.  This is partly due to the design of the character, and just partly due to some slightly stuck joints.  It’s hardly enough to keep him from being put into lots of fun poses, though.  K-Tron’s sculpt is wholly unique to this figure, and he lives up to the usual NECA standards.  Everything is clearly defined, and the details are all very sharp.  He shares more than a few similarities with some of their Pacific Rim figures.  Those were some of their best, so this guy does pretty well by association.  Having not seen the movie, I can only go by the images I’ve found online, but NECA seems to have done a pretty good job of accurately recreating the design in all of its sleekness.  K-Tron’s paintwork continues the trend of sleekness with the design.  The glossy black looks really sharp, as do the white insignias on the shoulders.  The gold bands are a little fuzzy around the edges, but are okay overall.  K-Tron is packed with a rifle.  It’s got some pieces that are practically begging to be snapped off, but that’s accurate to the film design.

THE ME HALF OF THE EQUATION

If I haven’t seem the movie, why do I have this figure?  Well, for one thing, I’m a sucker for cool looking action figures.  Couple that with Toys R Us’ currently running liquidation sales, and this guy was definitely coming home with me.  Honestly, I’d probably have bought him at full price, because he’s really just a quality figure.  Now, one of these days I really need to get around to actually seeing the movie…

*Want a K-Tron of your own?  He’s currently in-stock with our friends over at All Time Toys!  Click here to check him out!

#1686: Triceratops

Posted by Ethan Wilson in Reviews and tagged with , , ,

TRICERATOPS

JURASSIC WORLD (MATTEL)

I am a child of the ‘90s.  That means I was pretty much contractually obligated to go through a period of being super into dinosaurs.  In my case, it was actually a shorter period than for most.  I mean, it’s not that I *don’t* like them, but I haven’t actually bought any proper dinosaur toys since I was like 5.  There’s a new Jurassic World movie coming out, and thus some new toys coming out, courtesy of our friends at Mattel.  Oh goody.  I’m giving them, and dinosaur toys as a whole, another try, though.  Let’s see how this goes.

THE FIGURE ITSELF

The Triceratops is part of the first assortment of Mattel’s Jurassic World: S.T.E.M Fossil Strikers.  The Fossil Strikers come packaged disassembled, and have to be assembled.  The slightly rubbery plastic can make getting some of the parts popped together a little difficult, but otherwise it’s a rather of painless process.  When fully assembled, the Triceratops is 3 1/2 inches tall and 6 inches long, with 35 points of articulation.  In a similar fashion to the assembly process, the articulation can be a little tricky to get working in some parts.  The joints are tight enough that if you aren’t careful, you can end up popping pieces off instead of moving the joints.  It takes some slight getting used to.  The sculpt is pretty solid, especially for the price point we’re looking at here.  The bones are all textured, and look fairly realistic.  There’s some slight tweaking to a few of them to make room for the articulation, and some of the assembly points are still visible after assembly.  Compared to your average collector-oriented figure, it’s pretty solid work, and it’s especially nice coming from Mattel, whose sculpts can sometimes be a little bit too soft.  The Triceratops has no paint, being just a consistent bone white.  Given the whole “assemble it yourself” concept, this isn’t terribly surprising, and it looks decent enough.  I suppose a wash or something would help to bring out the details some more, but it’s not essential.  The Triceratops includes  his special “DNA Key” which unlocks his “striker” action.  In his case, it swaps out for the neck piece and uses a spring-loaded function to swing his head up or down, depending on how the piece is oriented.  Nothing terribly impressive, and mine won’t be keeping it for display purposes, but they tried to do something more exciting, I guess.  The Triceratops also includes a display stand (made to look like a wood-grain base from a museum or something), and a stanchion with a little card detailing all of his features.

THE ME HALF OF THE EQUATION

I just sort of stumbled upon this guy at a Target, while out and about with Tim.  That other dinosaur toy I mentioned getting back when I was 5?  A rubber triceratops, picked up from a supermarket trip with my Nana.  Since then, I’ve always had a soft spot for these guys.  This guy was $10, and that was low enough to get me to bite.  This isn’t a revolutionary toy or anything, but it’s still pretty cool, and definitely worth what I paid for it.  If you’re into cool dino toys, this line’s definitely worth checking out.

#1685: Invisible Woman

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

INVISIBLE WOMAN

MARVEL SUPER HEROES (TOY BIZ)

“The Invisible Woman loves to vanish into thin air! She can also use her amazing power to turn other people and things invisible too! The Invisible Woman can also create invisible force balls and discs that she can mentally throw at enemies. She can levitate herself and others out of harms way with this invisible force in the blink of an eye. Super-villains know that what they can’t see can hurt them when they have to fight the Invisible Woman! Use her invisible catapult launcher to spring her into action.”

The Fantastic Four seem to be in a better spot all the time.  After a few years of essentially not existing over at Marvel, this year, they’ll be making their triumphant return to the comics pages.  Yay for them!  They’ve also been absent from the toy aisles for a little while, but Marvel Legends are offering up some new figures.  There are also plenty of older offerings, one of which I’ll be taking a look at today.

THE FIGURE ITSELF

Invisible Woman was released in Series 3 of Toy Biz’s Marvel Super Heroes line, and was then re-issued in Series 5 of the same line.  There were two slight variations on the figure, one featuring a color-changing feature, and one not.  This one is from the second group.  The figure stands 5 inches tall and she has (or had, anyway) 9 points of articulation.  The joints, particularly the neck joint, are on the fragile side, so mine has been repaired at the neck joint, rendering it motionless.  This figure’s sculpt was re-used wholesale for the Hall of Fame release, reviewed here.  It’s a dated sculpt, to be sure, and definitely looks clunky compared to later releases.  It’s got its charm, though, and it certainly fits in with the rest of the line, especially the other FF figures from Series 3.  The paint work is the main difference between this figure and that one.  Since she lacks the color-change feature, she’s not all washed out, which is a plus.  The application is pretty clean, and the palette matches pretty well with how she looked during the Byrne run.  Like the other figure, this one includes her weird Tron-disk, frisbee-thingy.  Still don’t know what that’s supposed to be.  She also includes a clear launch-pad stand, re-used from X-Force‘s Cannonball.

THE ME HALF OF THE EQUATION

This was my first Sue Storm figure, purchased from KB Toys back in the day, when she was still relatively new.  It was either her or the Fantastic Four Series 2 version, and that one was all clear, so I opted for the one I could actually see.  She’s a dated figure, and has been surpassed by later versions, but she’s still special.

#1684: Boba Fett

Posted by Ethan Wilson in Reviews and tagged with , , , ,

BOBA FETT

STAR WARS: POWER OF THE FORCE II (KENNER)

“The most notorious and fearsome bounty hunter in the galaxy is also the most mysterious. Many legends and stories have arisen over the years, but few facts are known of the man called Boba Fett, or his link to Han Solo’s past. Since the Clone Wars, Fett has worked as a mercenary, a soldier, a personal guard, an assassin, and most frequently, as the most expensive bounty hunter in the known systems.”

Is it safe?  Can I come out?  One never can be too sure when reviewing a Boba Fett figure.  His fans are easily startled, but they soon return, and in greater numbers…or something like that.

So, yeah, looking at the Fett-man today.  He’s had a lot of toys over the years, but they used to be fewer and further between.  The return of the brand in the ‘90s got in on the whole ‘90s anti-hero fad, so he was pushed to the forefront.  As such, he figured pretty prominently into Kenner’s relaunch, getting not one, but three figures in short succession.  I’ll be looking at the first of those today.

THE FIGURE ITSELF

Boba Fett was part of the first series of Power of the Force II figures, hitting in 1995.  The fact that Boba made it into Series 1 was quite a feat, given his relative obscurity compared to the others in the assortment with him.  It wasn’t really something that would happen again; he tends to be held back for at least the second assortment now.  The figure stands 3 3/4 inches tall and he has 6 points of articulation.  His sculpt was unique, and as an early offering from the line, he’s certainly filtered through the line’s distinctive style.  The big thing is his overall build, which isn’t quite as absurd as a few of the others in the early line-up, but it’s still really puffy for the character seen on screen.  Definitely some Mandalorian super-engineering going on here.  Similar to the Stormtroopers, his armor takes a bit of a turn as well.  Most notably, his helmet, specifically the visor, has taken a slightly different look from the movies.  It’s a lot rounder at the edges and the visor is quite a bit wider than it should be.  His view-finder is also quite a bit stubbier than it really ought to be; at it’s current length, there’s no way it would be able to come down in front of his eye.  The rocket pack and the scarf/Wookie braids are both removable pieces.  The rocket’s pretty decent, and actually stays on a lot better than later figures.  The braids and scarf rely on a rather bulky shoulder piece to attach, which looks a little off when the figure is fully assembled.  Later figures would definitely get these parts down better.  The paint work on Boba is based on his slightly more colorful RotJ design, so he gets the blue and orange pack and the red wrist gauntlets.  The figure actually does a pretty solid job of getting all of the painted elements in place, and he even gets the bits of chipped paint on the armored sections.  Boba included his distinctive blaster rifle, a piece which is missing from my figure.

THE ME HALF OF THE EQUATION

As a kid, I didn’t have this figure; I had the deluxe version instead.  And I didn’t even have that one on purpose.  My cousin got two of them for his birthday, and I got to keep the extra.  That figure went missing over the years, and in the mean time, I’ve picked up more of an appreciation for Boba.  I got this guy from Yesterday’s Fun.  He was out of his box, but still in his tray, and only missing the rifle, so I figured he was worth it.  He’s a goofy figure.  Since Boba’s a character that’s really only got the cool design going for him, I think he was hurt a bit more by a line that made everybody look really goofy.

#1683: Quake

Posted by Ethan Wilson in Reviews and tagged with , , , ,

QUAKE

MARVEL MINIMATES

Well, this is quite the occasion, isn’t it?  Today, I’m wrapping up my latest round of Marvel Minimates reviews by taking a look at the very first Minimates Build-A-Figure.  Build-A-Figures aren’t a new concept, of course, but Minimates, a brand defined by their mix-and-match capabilities of the line, are just getting in on the bandwagon.  It’s about time.  So, let’s have a look at Daisy Johnson, aka Quake!

THE FIGURE ITSELF

Quake is the Build-A-Figure for Series 75 of Marvel Minimates.  The assortment is themed around the Defenders, a theme that Quake doesn’t quite fit.  That being said, as a star of Agents of SHIElLD, she fits the loose television-based theme of the assortment, as well as going along with the included Robbie Reyes figure.  She’s built on the standard ‘mate body, so she stands 2 1/4 inches tall and has 14 points of articulation.  She’s got four add-on pieces, for her hair, her harness, and her gauntlets.  All of them are re-used, with the hair coming from Oswald Cobblepot, the harness coming from Maria Hill, and the gauntlets come from Tekken‘s King.  It’s an eclectic selection of pieces to say the least.  It makes for a pretty good representation of her comics design, though I’m not super crazy about the hair.  Quake’s paint work is pretty solid; the detailing is all pretty sharp, and I like that the palette matches with the SHIELD Agents from Series 43 and 51, so that’s good for inter-mingling.  Quake includes no accessories of her own, but since she’s just an accessory herself, that’s fairly reasonable.

THE ME HALF OF THE EQUATION

You’ve read the other four reviews, right?  Good, then you know where this figure came from.  Clever you.  I wasn’t really buying this assortment to assemble her or anything, but Quake was a nice little bonus for getting the whole set.  I like this concept a lot, and I’m interested to see what DST is able to do with it going forward.

#1682: Daredevil & Ghost Rider

Posted by Ethan Wilson in Reviews and tagged with , , , ,

MARVEL NOW! DAREDEVIL & ROBBIE REYES GHOST RIDER

MARVEL MINIMATES

And we’re back with the odd-ball pairings.  I started the week out with the somewhat strange Punisher/Moon Knight combo, and now I’m wrapping it up with another somewhat odd pairing: Daredevil and Ghost Rider.  It’s not actually completely unprecedented in this line.  There was a Target-exclusive pack that included both of them back in the day (though that was a Johnny Blaze figure).  Here they are again.

THE FIGURES THEMSELVES

Daredevil and Ghost Rider were part of Series 75 of Marvel Minimates.  Though Ghost Rider’s tie to the theme is somewhat dubious, Daredevil is part of the newest version of the Defenders, as well as being the central piece of the Netflix shows.

This set also includes the last piece of the Build-A-Figure Quake, her head.  I’ll be reviewing the whole of her tomorrow!

DAREDEVIL

Daredevil’s spot in this Anniversary-themed assortment is actually quite sensible, as Daredevil was included in two of Series 1’s three sets.  This marks his 14th time as a Minimate.  This one’s a slight departure from some of the others, being based on his current design, a mostly black number that is clearly inspired by his Season 1 garb from his show.  It’s actually a pretty sharp look, though I’m of course still partial to the classic red.  The figure is built on the standard ‘mate body, so he stands 2 1/4 inches tall and has 14 points of articulation.  He has add-ons for his mask, wrist wraps, and holsters.  The mask and holsters come from the Series 43 version of DD (though that release only had a single holster, not two), and make sense, since the design elements have remained consistent.  The arm wraps are from Street Fighter VS Tekken’s Heihachi (also re-used on the Best Of Iron Fist), and are pretty basic pieces, which certainly work for his comics look.  The paint on DD is quite good.  The color scheme is bold, and the line work is super crisp.  The grey high lights are a very effective way of creating dimension on the torso, legs, and mask, and make the suit look quite dynamic.  The face under the mask is great for action set-ups, with his teeth gritted and his brow furrowed.  The way they’ve done his pupils is unique from other characters, and helps sell that he’s blind.  DD includes a pair of billy clubs (just two, though, leaving one slot in each holster empty), an extra hair piece (re-used from Terminator 2’s young John Connor), and a clear display stand.

GHOST RIDER

Though Ghost Rider’s no stranger to Minimates, this one is actually a debut, since it’s the latest Rider, Robbie Reyes.  Robbie’s been getting the push from Marvel for a little while, and his appearances on Agents of SHIELD mean he fits in decently enough with the assortment’s TV-inspired theme.  The figure gets one add-on piece, which is his flaming, skull-inspired helmet.  It’s a new piece, and it does a respectable job of replicating the design of the helmet from the comics.  The rest of the detailing is done via paint.  Like Daredevil, there’s a nice contrast to this figure’s look.  The black and white looks really sharp, and I like the visual similarities to Johnny Blaze’s original design.  Under the mask is a fully detailed Robbie Reyes face, which seems to be in keeping with his comics likeness.  Robbie is packed with a pair of chains (because he just has to one-up Johnny, apparently), an extra hair piece, and a clear display stand.  He is, of course, missing his ride, but since Robbie drives a car instead of a bike, its absence feels more excusable.

THE ME HALF OF THE EQUATION

Like the three preceding sets, this pair came from Cosmic Comix.  A new Daredevil wasn’t a necessity, but this one is definitely a fun figure, and there’s a lot of really sharp work going into him.  Robbie isn’t Johnny, so for me he’s not *the* Ghost Rider, but he’s got a cool look, he’s gotten exposure recently, and it’s nice to get a new character.  His ‘mate isn’t the star of this series, but he’s still a solid offering.

#1681: Jessica Jones & Purple Man

Posted by Ethan Wilson in Reviews and tagged with , , , ,

JESSICA JONES & PURPLE MAN

MARVEL MINIMATES

“Retcons.  I hate these guys.”

-Me, 2018

You know what I don’t like?  Retcons.  I know.  What a shock.  You couldn’t have seen that coming.  Half of today’s review subject is a retcon.  You see, when Brian Michael Bendis wanted to write a series about Jessica Drew, aka Spider-Woman, he wasn’t allowed to use her, so he created his own, somewhat similar character, and then forcibly shoved her into the history of the Avengers.  Ta-da!  It’s Jessica Jones!  Yay?  Yeah, not a huge fan.  But, I am a fan of Minimates, and I don’t hate the other half of this set, Purple Man.  So, let’s see how this goes.

THE FIGURES THEMSELVES

Jessica Jones and Purple Man were released in Series 75 of Marvel Minimates.  Like yesterday’s set, they continue the modern-day Defenders theme, but also work as more of a self-contained pairing.

This set also includes another pair of pieces to the Build-A-Figure Quake ‘mate, specifically her arms and gauntlets.

JESSICA JONES

Oh boy, here she is.  Jessica Jones.  Woooo.  So, this is Jessica’s second time as a Minimate, following her Netflix-based ‘mate from her show.  This one is comic-based, but admittedly, it doesn’t make for an incredibly different look overall, but she’s slightly different aesthetically, of course.  The figure is built on the standard ‘mate body, so she stands 2 1/4 inches tall and has 14 points of articulation.  She’s got one add-on piece for her hair.  It’s re-used from Big Bang Theory’s Penny, and it’s actually a really nice piece, as far as detailing and shaping goes.  It’s also a pretty decent match for her usual comics hair.  No jacket piece used for this ‘mate, but I actually think it works a bit better, especially since it would have meant not being able to use the hair piece.  The paintwork on Jessica is pretty decent.  Application is clean, and the lifework is nice and sharp.  The expression on the face could maybe do with a bit more character, but it’s not terrible as it is.  The color scheme is rather dull, but that’s true to the character.  She includes a camera (re-used from the SM3 Peter Parker), a coffee mug with the Avengers logo, a smart phone, and a clear display stand.

PURPLE MAN

Though he’s linked to Jessica Jones now, Purple Man started off as a Daredevil villain.  Interestingly, my first introduction to him was in an episode of X-Men: The Animated Series.  What a weird world we live in, right?  Purple Man started his career wearing a spandex getup, but pretty quickly moved onto wearing suits and the like, in variations of purple.  It’s that later look that this figure goes with, which is a sensible choice.  The figure uses three add-on pieces to complete the look.  He’s got a hair piece (re-used from Thor: Ragnarok’s Grandmaster), jacket (re-used from the “World of the Psychic” Peter Venkman), and a collar piece (re-used from Admiral Kirk).  All re-used, but all very well chosen.  They make for a sharp looking combo.  The rest of the work is paint, and it’s actually quite impressive.  The variations of purple are easily distinguished from each other, and they compliment each other quite nicely.  The facial detailing is particularly nice, and captures Jebadiah’s creepy smirk pretty darn well.  Just makes you feel like you need a shower.  Purple Man’s only extra is a clear display stand, but I can’t really think of what else you’d give him.

THE ME HALF OF THE EQUATION

This set came from the same purchase as the last two.  Jessica’s maybe not my favorite character, but DST definitely put the effort in on this Minimate.  Even divorced from the character, it’s actually a pretty solid ‘mate, and one of the better civilians done in this style.  Purple Man’s the star of the set for me.  He’s a fairly basic design, but the execution’s really top-notch.  Details like the collar, which could have easily been overlooked, weren’t, and so he really benefits from that.

#1680: Luke Cage & Iron Fist

Posted by Ethan Wilson in Reviews and tagged with , , , ,

MARVEL NOW! LUKE CAGE & MARVEL NOW! IRON FIST

MARVEL MINIMATES

There’s not really a better cut and dry pairing of heroes (at least on the Marvel side; back off Caped Crusaders!) than Luke Cage and Iron Fist.  Amusingly, they’re only paired off because both of their comics were on the verge of cancellation.  It ended up being pretty perfect, though, and the pair’s lasted a good long while.  They’ve been paired off two times prior for Minimates, and this time marks the third.*

THE FIGURES THEMSELVES

Luke & Danny are the second set in the milestone 75th Series of Marvel Minimates.  Unlike yesterday’s set, they’re both centrally placed in the recent street-hero incarnation of the Defenders, so they really fit the theme.

Like yesterday’s set, this one also includes a piece of the Build-A-Figure Quake, specifically the torso, pelvis, and harness.  It appears to match the Series 51 Maria Hill, which is good for consistency’s sake.

LUKE CAGE

Luke Cage seems to be kind of cursed to the most dated costumes ever.  While I’m partial to his classic poofy-sleeved, tiara-sporting look, it’s fair to say it’s not easily taken seriously in this day and age.  He went through more of a thuggish look a few years back, but now he’s moved up to a more polished vested look.  Less super-hero-y than his original, but a sharp look nonetheless.  The figure stands 2 1/4 inches tall and he has 14 points of articulation.  Luke is built on the standard ‘mate body, and has add-ons for his vest and rolled-up sleeves.  The sleeves are re-used from the Spirit set, and the vest is a new piece.  It’s a little bit bulky, and perhaps a little blocky, but it’s overall a decent piece.  It helps keep Luke from being too shrimpy, like most of his prior figures have been.  The rest of the work has been done via paint.  The application is pretty clean, though it would appear that the white application on my figure’s face has been slightly offset.  It’s not enough to be overly noticeable, but it’s a minor annoyance.  Beyond that, it’s pretty solid.  Luke’s expression is intense, though less so than the Best Of release, so it’s a little more versatile.  Luke’s light on the accessories, with only a clear display stand.  I’m not really sure what else he could be given, though.

IRON FIST

Like his partner, Danny Rand’s had his fair share of dated costume designs.  This one actually seems to play that up a bit, giving him a track-suited design, inspired by Bruce Lee’s yellow and black get-up from Ascension.  I think his David Aja design’s still his best, but this one’s certainly got character, and it’s his most recent look.  Iron Fist has add-ons for his mask and his collar.  Though they both have definite similarities to prior pieces, both are all-new to this figure.  They’re alright, I suppose.  I’ve never been much of a fan of how the collar pieces hide the neck.  The mask looks okay, but doesn’t have any of the shaping that some of the others had.  Iron Fist’s paint work is a little cleaner than Luke’s.  My only minor complaint would be that the eyes on the mask seem a little too high-set, but they don’t look terrible.  The gold detailing works surprisingly well, and I appreciate that the track-lines go all the way up his sides.    Iron Fist makes up for Luke’s lack of extras, with a spare hairpiece, a pair of nunchucks, and “Iron Fist” effect piece, and a clear display stand.  Not a bad little assortment of extras.

THE ME HALF OF THE EQUATION

This set was acquired at the same time as yesterday’s, courtesy of a joint partnership between Cosmic Comix and Tim.  Luke Cage has had some troubles with getting a decent Minimate.  This one is perhaps not as exciting as others, but it’s still probably his best.  Iron Fist’s design isn’t quite as versatile as older versions, but this figure still translates it pretty well to ‘mate form.

*It’s worth noting that they’ve both actually had four comics-based ‘mates.  Each of them got one release without the other.  The less said about those particular releases, the better.

#1679: Moon Knight & Punisher

Posted by Ethan Wilson in Reviews and tagged with , , , ,

MOON KNIGHT & PUNISHER

MARVEL MINIMATES

2018 marks the fifteenth year of Marvel Minimates, if you can believe it, and DST’s celebrating that with Series 75 (which, of course, all long-term fans know, is actually only the 74th Series in actual count, thanks to Series 15, the only series of Marvel Minimates ever to be outright cancelled).  75 is Marvel Knights/Defenders themed, offering up some of Marvel’s lower level characters.  Today, I’m looking at the one set in the series not to actually feature any of the current Defenders members (but don’t hold that against them), Moon Knight & Punisher!

THE FIGURES THEMSELVES

As noted above, Moon Knight and Punisher are part of Series 75 of Marvel Minimates, which takes loose inspiration from the Netflix slate of Marvel shows.  Moon Knight’s kind of out of the odd man out in this respect, but maybe he’ll show up in the next slate of them?  Please?

Also included in this set are two pieces of the very first Minimate Build-A-Figure, Quake!  In this set, we get both the legs.  They’re just standard legs, done up in colors to match the SHIELD agents from Series 43 and 51.

MARVEL NOW MOON KNIGHT

This is only Moon Knight’s sophomore figure in the Minimates line.  His last was all the way back in Series 29, 46 series and 9 years ago.  I think that’s a decent enough wait time for a re-do, don’t you?  This one’s not actually a straight re-do; it’s based on his armored look from Warren Ellis’s re-boot of the character.  It wasn’t his main look during Ellis’s run, but it was picked up by others, and has shown up in a few games and one of the cartoons.  I think it’s a solid re-imagining of his usual look.  Of course, as luck would have it, he went back to his all-white look a few months before this guy hit shelves.  Oh, darn, I guess we’ll just need another Moon Knight.  The figure stands 2 1/2 inches tall and has the usual 14 points of articulation.  Moon Knight’s sculpted elements are limited to his signature cloak.  Like his last Minimate, the hood and cape are two separate pieces, in order to help maximize posability.  These have been the source of some contention in the fanbase, with lots of debating over which cloak is the superior one.  While the old one always looked nice, it was never much for posing, and made keeping him standing nearly impossible.  This new one dials things back a bit, and gives us a more simplified design.  It’s still not perfect.  The hood in particular bugs me; something about its shape is slightly off.  Still, it’s an improvement in terms of playabilty, which makes for a better figure. Moon Knight’s paintwork is nice and bold.  It’s coming at the character from an entirely different angle than the last ‘mate, being very sleek and clean.  There’s a little bit of bleed over on some of the black-to-white changes, but for the most part, he looks pretty sharp.  In particular, the wider eyes seen on this version’s mask feel more in tune with the character than the tiny squinting eyes from the last one, and I also really like the grey highlights, which keep the black sections from getting too monotonous. Included with Moon Knight are his staff and a clear display stand.  The staff is re-used from the animated Proxima Midnight, but it a decent match for the staff Moon Knight is usually seen carrying about.

FRONTAL ASSAULT PUNISHER

I’m not sure of how comfortable I am with the “Frontal Assault” descriptor.  Wouldn’t such a name would be more appropriate for one of the trench-coated variants?  To DST’s credit, there are only so many buzzwords you can throw in front of the name “Punisher.”  Just plain “assault” was already taken and yet another character with the “Marvel Now” moniker might tear open a rift in the space time continuum.  But, I digress. Frank Castle is no stranger to Minimates, this being his eighth entry in the line.  This one’s his first comics-based ‘mate since 2013 (barring the 2016 re-release of the Best Of ‘mate), and it’s based on his pre-Secret Wars look from around 2014 or so.  It’s a nice sort of tactical look for the character, and also offers something in keeping with how the character looks in the Netflix shows. Punisher has add-on pieces for his hair and tactical vest.  I believe both of these are new to this particular figure.  The vest definitely is, but the hair is throwing me.  Regardless, both pieces are incredibly well-sculpted, and very nicely suited to the character.  The vest in particular just really encapsulates how I feel the Punisher should look. Punisher’s paint work is really a collection of pleasant surprises.  Let’s start from the weakest point and move upwards: his vest and sleeves show a little bit of slop.  Nothing too terrible, but notable given the quality of the rest of the paint.  The face is pretty classic Frank Castle, all grizzled and angry.  The application’s quite clean, and I like that they’ve even given him his stubble (not that stubble’s exactly a new thing on Minimates).  Under the vest, there’s a skull-emblazened t-shirt, which is a very nice touch.  He’s also got some incredible small detail work on his arms and legs, with the legs in particular standing out with all the stitching and line work associated with the tactical pants.  Really great attention to detail there. Punisher includes an HK94A3 Rifle (first included with the T2 SWAT officer), as well as a skull-faced mask piece (based on a mask he was frequently seen wearing during the 2014 run), and a clear display stand.  I’d have liked to get some additional guns.  Just the rifle seems a little light.

THE ME HALF OF THE EQUATION

I got this set from my LCS, Cosmic Comix (okay, technically I got it from Tim, who bought it from CCX; he was paying me back for grabbing him an Obsidian Fury).  Moon Knight’s been due another Minimate for a while now.  This one takes a decidedly different approach to the character than the last one, so a direct comparison is a bit difficult, but this offering walks the line of look vs playability better than the last one.  I’m hopeful an all-white variant might show up in the near future.  In the mean time, this one’s a solid addition.  In a set where the clear selling point was Moon Knight, Punisher serves as sort of a sleeper figure.  As only a moderate fan of the character, I wasn’t anticipating much from him, but he’s a high quality, truly exceptional ‘mate.