Category Archives: Reviews

#0868: Space Marine Power Loader

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

SPACE MARINE POWER LOADER

ALIENS (KENNER)

PowerLoaderK1

Hey guys! Do you know what my favorite movie is? You should, because I talk about it like an excessive amount. But maybe you’re new here, or bad at paying attention, so I’ll remind you that it’s Aliens, aka the greatest film of all time! The movie has gotten quite a few action figures in the last few years, but it’s very first action figure line came from Kenner in the early 90s, and it was the result of a failed Saturday morning cartoon adaptation. I’ve looked at a fair number of the figures, but there were also a number of vehicles in the line. Most were made up, but they did get make the Power Loader, allowing kids of the ‘90s to proudly say “Get away from her you…female dog.”

THE FIGURE ITSELF

PowerLoaderK2The Power Loader was released just after the first assortment of items from Kenner’s Aliens line, alongside the first version of the Alien Queen. The base Power Loader body stands about 7 inches tall (the “alienator” missile launcher adds another inch or so, depending on its orientation) and its articulated at the shoulders and has an opening cockpit, and there is also movement on the two side guns on the arms and the base of the missile launcher. The claws can also move, but they are worked into a spring-action feature, and therefore cannot hold a pose on their own. The Kenner line can be best described as “inspired by Aliens,” more so than being a straight recreation of the movie’s designs. While it certainly fares a bit better than a lot of items in the line in terms of film accuracy, there’s no denying that this Power Loader is an entirely different beast than the film version. The basic shape is more or less the same, especially when the missile launcher is in its away position; this thing will definitely pass the squint test. The claws are the first real change, being a more conventional Sci-fi claw design than the more forklift styled claw from the movie. The legs have also been changed from more typical human-style legs to a treaded design that looks fairly similar to the Robot from Lost in Space, presumably to allow the torso and legs to be one solid piece. There are also the added guns, one on each arm, which make the Power Loader more of an offensive machine (one has to wonder if Kenner was aware that these weapons and such resulted in the Power Loader’s name becoming something of an artifact). From there, most of the changes are small and aesthetic, in order to make the overall design a bit more streamlined and in keeping with the more simplistic nature of the whole Kenner line. The end result is PowerLoaderK4actually not a bad looking toy, and certainly one that bridges the gap between toyline and movie quite well. A fair number of these changes have been made in order to better facilitate placing the Kenner Ripley figure in the loader. She doesn’t fit perfectly, due to her rather limited articulation, but she manages to look decent enough. For the most part, this thing’s just molded in bright yellow, with minimal paint for the elbow joints and the treads on the feet. The yellow is a bit on the warm side, but not terrible, and what paint there is has been handled cleanly. The rest of the details are handled via a sheet of decals included in the package, which add a ton of cool little details. Aside from the missile for the “alienator” the Power Loader has no real accessories, but being a glorified accessory itself, that’s not really a problem.

THE ME HALF OF THE EQUATION

The Kenner Power Loader is an item I’ve wanted for quite some time. When I saw it on the back of my first Ripley’s card, I was immediately impressed. Unfortunately for me, it’s not quite as easy to find as the figures, so I was never able to find one. At Farpoint this year, I found it at the table of one of the dealers (the same guy who has been selling me a steady supply of other 90s toylines at the last several cons I’ve attended). It ended up being the most I’ve spent on a single item from the Kenner line, but certainly not outside my price range. This toy definitely she’s its age, and one can hardly compare it to NECA’s recent masterpiece, but this is a really fun take on one of the film’s most memorable moments, and it looks awesome with the rest of my Kenner figures.

PowerLoaderK3

#0867: Wonder Woman

Posted by Ethan Wilson in Reviews and tagged with , , , ,

WONDER WOMAN

DC COMICS MULTIVERSE (MATTEL)

WWDoJ1

March 25th will see the release of Batman v Superman: Dawn of Justice. March 25th will also see me avoiding movie theatres like the plague, because I have no desire to see the movie (my scathing hatred of Man of Steel is the main reason, but there are a few others). For the most part, I’m also steering clear of the associated toys that go with said movie due to them a) being based on designs I’m not super thrilled by, and b) made by Mattel, who happen to be one of my least favorite toy makers. However, I’m a firm believer that a cool toy is a cool toy regardless of its source material or manufacturer. And that, dear readers, is why I’m reviewing today’s figure, Wonder Woman.

THE FIGURE ITSELF

WWDoJ2Wonder Woman is part of the first assortment of the Dawn of Justice series of DC Comics Multiverse. Multiverse has previously been a 3 ¾ inch line, but starting in 2016, Mattel is bumping the line back up to the more familiar 6-inch scale. Also, it should be noted that there are currently two different case pack-outs for this line, and Wonder Woman is only in one of them. That said, she doesn’t look to be all that hard to find right now. The figure stands just shy of 6 ½ inches tall and has 26 points of articulation. The articulation is overall fairly decent, but it seems a bit rudimentary when compared to, say, one of Hasbro’s Marvel Legends. The lack of any real movement on the head is a bit frustrating, but excusable. The height (well, the whole scale, really) of the figure is definitely a bit off; she’s the tallest of the four figures in the series, despite Gal Godot being the shortest of the three leads. She’s more scaled with something like a NECA figure than she is her fellow Multiverse figures. Her sculpt is all-new, and it’s generally pretty good. There’s definitely some oddities, such are the somewhat obvious joints in the arms and legs, or the strangely geometrical upper legs, but the overall proportions of the figure are surprisingly well done. She’s easily one of the most realistic female figures Mattel has ever produced. The details of the costume seem to pretty close to what we’ve seen of the movie’s design, and there’s some decent texture work. The head is pretty decent, if not amazing. I don’t immediately see Gadot’s likeness when looking at the figure, but it’s hard to say how much of that’s the sculpt and how much is paint. Speaking of paint, that’s where this figure takes a slight dive. On a whole, I actually like it, especially the choice to go a bit brighter with the colors than what we’ve seen from the film. However, the application is a bit spotty. The two biggest areas of issue WWDoJ3are the face and the boots. The face is at least fairly clean, if perhaps a bit thick and in need of some accent work. The boots seem like the painter just got confused by all those sculpted lines and gave their best approximation; they’re quite sloppy, and the flesh toned ankle joint breaks them up in kind of an odd way. Wonder Woman is packed with a sword and shield (which appears to be the Aegis, aka the shield given to Perseus by Athena). The shield is an amazingly sculpted piece, and by far my favorite part of this whole figure, though it can be a bit difficult for Diana to hold it. The sword is generally pretty nice, though the rather obvious “CHINA” stamp on one side makes it look like Wonder Woman has had to make due with a repro of her actual sword. Wonder Woman is also packed with what has to be the lamest build-a-thing piece I’ve ever gotten; it’s the supporting column to the display base for the Batman Grapnel replica. Seriously, it’s lame.

THE ME HALF OF THE EQUATION

When I saw the various Dawn of Justice merchandise in the store, I was prepared to totally overlook it. But, I saw Wonder Woman, and was genuinely surprised by how much I liked her. No, she’s not a perfect figure, but she’s really not bad, either. And, with the size that she is, she actually fits in pretty nicely with the recent Adam West Batman and Christopher Reeve Superman from NECA, making for a pretty cool trinity display (though I’d happily replace this figure with a Linda Carter Wonder Woman, should NECA ever get the rights…). I’ve certainly gotten worse figures from Mattel.

#0866: Spartan Athlon

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

SPARTAN ATHLON

HALO 5: GUARDIANS (MCFARLANE)

AthlonWal1

One of the things that makes the Halo license so appealing to toy companies is that, thanks to armor customizableity, you can generally get several different figures out of one Spartan Armor mold via repaints. McFarlane Toys in particular exploited this during their tenure with the license, while at the same time using these repaints to give their most supportive retailers exclusive figures. The Halo 5 line was pretty egregious about it, with half of the Spartans in the first series being offered in two distinct paint schemes. I’ve already looked at one variation of the Athlon, but why not look at another?

THE FIGURE ITSELF

AthlonWal2Like the prior Athlon, this figure was released as part of the first series of Halo 5 figures from McFarlane. This particular version was exclusive to Walgreens. The figure is roughly 5 inches in height and he’s got 32 points of articulation. The sculpt is the same one used on the prior Athlon figure. I liked it there, and I like it here. It’s nice and clean, has plenty of details, and sums up the design from the game pretty well. The main selling point of this figure is his paint job. Instead of the bumblebee-like yellow and black, this figure is blue and off-white. It’s definitely a more appealing color combo, if I do say so myself. Also, instead of a dark blue visor, this one gets a more standard gold visor. If I’m honest, that part doesn’t look quite as clean. It’s not bad, but it’s a little flatter than I’d like. In general, I like the color choices on this figure better, but the actual application of the paint seems to be a slight step down. There’s a fair amount of slop and bleed over, which is just a bit more noticeable on a cleaner Spartan design such as the Athlon. It’s not terrible, but it’s a noticeable step down from the other Athlon. Another area of difference between the two figures is the accessories selection. He includes the same basic Magnum (included with all the first series Spartans), but he’s traded out the assault rifle for an SMG, which is a change I’m definitely okay with!

THE ME HALF OF THE EQUATION

None of the Walgreens near me had this particular figure in stock, so I didn’t get him until I was on vacation with my family over the winter holiday. I was actually pretty excited to find him, as this color scheme is definitely my preferred of the two available. Ultimately, the quality of this figure isn’t quite as high as the normal release, which is a bit of a bummer. However, this is still a pretty solid figure, and he adds enough new to make him worth the purchase.

#0865: Big Guy

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BIG GUY

BIG GUY & RUSTY THE BOY ROBOT

BigGuy1

It’s not uncommon for an adaptation to outshine what it’s adapting. Often movie or TV adaptations of books will far outpace the things that spawned them, at least in the public eye. Most of the time, though, the adaptation is better known because it’s more widely available. Enter the strange case of Big Guy & Rusty the Boy Robot. If you look up the comic on Wikipedia, you’ll note that the series was created by Frank Miller of all people (and there’s no mention of crack whores anywhere in sight!  Weird). That’s about it, because the entry for the comic is pretty sparse. The entry for the cartoon, however, will actually net you quite a bit of info. See, the cartoon ran for a whole two seasons, and managed to inject backstory and connecting through lines to pretty much every episode, despite only being a Saturday morning cartoon. It’s generally viewed as being the more formed version of the characters. But, while you can still find collections of Miller’s original series, getting episodes of the show is pretty darn hard, which has made the show pretty much unknown to anyone who didn’t see its original run. Still, mention the name and a lot of people will think of the cartoon. To the cartoon’s credit, it did manage to get a handful of toys of the two titular characters, including the figure I’ll be looking at today.

THE FIGURE ITSELF

BigGuy2Big Guy was released as part of the smaller-scale Big Guy & Rusty the Boy Robot line from Bandai America. Yes, I know, it’s Bandai. They don’t have an amazing reputation on this site. Bear with me. The figure is roughly 6 ¼ inches tall and has 6 points of articulation. Here’s where things get a little strange; he has cut joints at the shoulders, wrists, and …knees. Yeah, cut joints at the knees. Instead of, I don’t know, hinge joints? He also has absolutely no movement at the neck, waist, elbows, or hips. You see the pose he’s standing in? That’s pretty much the only pose you’ll be getting out of this guy. His movement was so stunted that they had to release a whole separate figure to replicate his flying pose, which isn’t even all that different from the basic standing pose! Why the lack of movement? Well, his torso houses a battery compartment. Pressing the figure’s chest insignia made the eyes light up and allowed him to say some dialogue from the show. It’s an okay gimmick (not that it works on mine all these years later) but it hardly warrants the totally lack of posing options. In the figure’s defense, he does have one thing going for him: the sculpt. It’s not a perfect recreation of his look from the cartoon, but it manages to be pretty close, and certainly closer than a lot of cartoon toys from the same time. So kudos to Bandai for at least making him look like the character. Of course, the back of the figure is riddled with exposed screws, due to the electronics, but hey, small victories, right? The paintwork on this guy is generally pretty clean, if perhaps not super exciting. The figure is cast in white, and the blue is painted on. That’s about it. It’s true to the show, so I guess that’s fair. This figure originally included a small-scaled Rusty figurine. However, mine did not have the proper Rusty, but instead included the larger scale Rusty from the Deluxe Big Guy figure, which was rather out of scale with this one. Darn.

THE ME HALF OF THE EQUATION

I picked this figure up from a flea market (the same one the netted me Perseus, in fact). I had a flying Big Guy when I was younger, but I couldn’t begin to tell you where he is now. This one was quite reasonably priced, so I went for it. As an action figure, he’s quite a letdown, given his total lack of posability. As a representation of Big Guy, more along the lines of a statue? He’s okay. Certainly not the worst thing ever. I liked the show, and I’m happy to have a Big Guy for the shelf, so I’d call it a win.

#0864: Han Solo

Posted by Ethan Wilson in Reviews and tagged with , , , ,

HAN SOLO

STAR WARS: THE BLACK SERIES

HanTFA1i

A lot of (very much deserved) praise has been heaped on the new cast members introduced in the Force Awakens, but one of the coolest things about the movie was the return of some of the “old guard” from the Original Trilogy. The most prominent returning hero by far was everyone’s favorite scuffy-lookin’ nerf-herder, Han Solo. For a number of reasons, Han, along with most of the other returning characters, was absent from the first few waves of Force Awakens product, but the merch based on him is starting to hit in full storm. Today, I’ll be looking at his much anticipated Black Series figure.

THE FIGURE ITSELF

HanTFA2Han was released in the fifth series of the latest iteration of Star Wars: The Black Series. He’s marked as number 18 in the line, which makes him the last figure in this particular series numerically. The figure stands just over 6 inches tall (which is the same as his A New Hope figure) and has 27 points of articulation. Some of the movement, most notably his hips, is a little restricted, but he can certainly pull off just about any pose that the real Harrison Ford can. Han’s sculpt is totally new, and it’s an amazing piece of work. The proportions look great, certainly better than the last Han, and the detail work on the clothing is just fantastic. The jacket in particular has some amazing texture work, which adds a lot of character to the figure. The shirt and underlying belt are a little on the soft side, and I’m not sure I’m a fan of the pose on his left hand, but those are my only real complaints. The real draw of this sculpt is the likeness. Harrison Ford has a notoriously hard to capture likeness, but this is perhaps the best one we’ve ever seen. There are a few angles where it looks a bit off, but the HanTFA4boverall appearance is very close. Now, you may be thinking that, based on the pictures, he really doesn’t look as close as I’m saying. Well, here’s where the paint comes in. For the most part, the paint’s great. The clothing (particularly the coat) has some really great work, which really sells this as a real person. My first nit is the eyes; they aren’t terrible, but they’re a little sloppier than I’d like. However, the major issue here is the hair. The application of the paint is alright, but there’s no getting around the fact that it’s simply the wrong color. Instead of being mostly grey with maybe a few streaks of light brown, it’s light brown with just a few streaks of grey, resulting in him looking a fair bit younger than he should. It’s really annoying, because it seriously throws off an otherwise really great figure.* Han only includes one accessory: his signature blaster, which is a totally different mold than the one included with the Series 2 Han.

THE ME HALF OF THE EQUATION

When I found out this figure was hitting stores, I was anticipating him being a chore to find. So, I was pleasantly surprised to walk into my local Target and find him hanging on the pegs, hiding behind a pair of Jango Fetts. I’m not sure I can adequately describe just how much I like this figure. He’s hands down the best Han Solo figure I own, and possibly one of the best Black Series figures to date, and certainly the best of the Force Awakens figures. Yes, the hair thing is annoying, but this figure outshines all those issues, and is just a ton of fun to mess around with.

HanTFA3c

*It should be noted that the hair thing isn’t limited to just this figure. The Pop! and LEGO versions also sport the light brown hair, suggesting it’s a licensing issue of some sort.

#0863: Batman & Phantasm

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BATMAN & PHANTASM

BATMAN: ANIMATED (DCC)

Batman&Phantasm1

Batman definitely holds the record for number of theatrical films based on a single superhero. It’s not a huge surprise, given the character’s mass appeal. There have been a whole lot of tries at doing the character justice on the big screen, and exactly which one is the “best” is very much up for debate. I must admit, I cheat a bit when asked what my favorite theatrical Batman movie is, my answer is always Batman: Mask of the Phantasm. A lot of people forget about this one (due to lots of people writing it off based solely on its animated nature), but for me it’s the best Batman movie by far. Seriously, if you haven’t seen it, you really should. Like right now. Go watch it. No seriously, Imma spoil stuff and I don’t wanna ruin it for you. I’ll wait. Anyway, as an extension of Batman: The Animated Series, the film’s been privy to a few figures here and there, including getting a two-pack courtesy of DC Collectibles’ current line.

THE FIGURES THEMSELVES

Batman and the Phantasm were released as part of the Batman: Animated line in mid-December of last year. Both figures are exclusive to this particular set.

BATMAN

Batman&Phantasm2Faithful readers will no doubt find this figure somewhat familiar. Yep, I’ve taken a look at most of this figure before, back when I looked at the single-packed Batman from Series 4 of the main line. Since Batman’s design from the movie is identical to that of the show, it’s a sensible re-use, though it’s a bit frustrating to people who picked up the earlier figure and still want the Phantasm (like me). From the neck down, this figure is 100% the same as that figure. The proportions are still more or less spot-on, but he’s greatly hindered by the lack of swivel joints at the tops of his boots. The main difference between the two figures is the head. This version is a bit more expressive, with gritted teeth and eyes opened wider. It’s also a much better attempt at the design. The head’s a little wider, the eyes are bigger, and the jaw’s squarer, which all results in a generally better looking end-product. The paint is more or less the same. I did find the general application to be a bit cleaner this time around, but your mileage may vary. Another change between the two figures is the accessory complement. This figure only gets the batarang, a pair of hands for holding the batarang, a pair of fists, and a display stand. The stand is mostly the same as the prior one, but trades the B:TAS logo for a Mask of the Phantasm one.

PHANTASM

Batman&Phantasm3Now we get to the real draw of the set. The Phantasm was actually not a wholly original creation of the film, but was instead a retooled version of the villain Reaper from the “Batman: Year Two” storyline from the comics. The less said about the original story the better. The figure stands just over 6 ½ inches tall and has 23 points of articulation. This marks only the second time the Phantasm has appeared in plastic form. The first time, the figure was given a removable hood and scythe, allowing for (20 YEAR OLD SPOILER!!!!!!) her to double as an Andrea Beaumont figure. Since the two designs in the film are purposefully dissimilar, this meant compromising the appearance of the Phantasm in order to have a decent Andrea. This figure foregoes any sort of Andrea connection, and instead opts to present the Phantasm in as screen accurate a manner as possible. Well, in theory, anyway. The end result is pretty good but a bit shy of perfect. Let’s talk about what works first. The underlying head is great, are both hands/gloves. The body is generally decent. It’s not a perfect match, but Phantasm’s proportions changed a bit in the movie, so it’s forgivable. Even the base of the cape isn’t too bad. What hold’s this figure back is the hood. In the film, it has a very distinct, very sharp look about it. Here, it’s a soft rubber piece, attached to the rest of the cape. It ends up being kind of shapeless and too soft. I think it would have looked much better had it been separate from the cape and attached to the head, ala the smaller scale Kylo Rens that Hasbro’s released. As it stands, this doesn’t look atrocious (especially if viewed from a slight angle) but it could have been a lot better. Also, the quality of the rubber used for the cape/hood is a bit questionable, and it feels like it’s already starting to deteriorate, which isn’t super comforting. The paint on the Phantasm is pretty simple, but not bad. The various details are all pretty clean, and she’s appropriately mono-chromatic, so that’s good. The figure includes two hands, one in a fist and one in an open gesture, as well as a display stand. That seems a little light, and I certainly wouldn’t have minded some sort of piece to show off her ghostly gas cloud thingy.

Batman&Phantasm4

THE ME HALF OF THE EQUATION

I picked this set up from my local comic book store, Cosmic Comix, in early January. I had actually seen it at another store in December, but passed on it for a number of reasons. While I don’t feel the set is as strong as it could have been, I’m glad I have it. Batman’s a definite improvement over the single-release, and the Phantasm is a sound addition to the line. Now, how about a follow up set with an unmasked Phantasm and a battle-damaged Joker?

#0862: Robot Soldier

Posted by Ethan Wilson in Reviews and tagged with , , , ,

ROBOT SOLDIER

CASTLE IN THE SKY (FINE MOLDS)

CitSRobot1

Every so often, I like to take a look at a model kit. There’s a lot of cool snap-kits out there, which not only give me the fun of building a model, but I also get to have a fully functioning toy when I’m done with building. That’s one hell of an incentive, for me anyway. I’ve looked at three of these kits so far, all of which have been based on Gundam, a property I’m not super familiar with. So, I was more going for a cool looking toy at the end of the ride, without a whole lot of emotional attachment to any of the figures I was building. Well, today, I’m actually looking at a kit I got for the sole purpose of getting a cool figure of a character I really like, though the figure’s still a little outside of my usual area of expertise. So, without further ado, let’s take a look at the Robot Soldier from Castle in the Sky, or as it’s known in Japan, Laputa: Castle in the Sky.

THE FIGURE ITSELF

CitSRobot2The Robot Soldier is one of two Castle in the Sky-based model kits from Fine Molds (the other is the Robot Gardener, which is really just this set, but with different arms). The set was released in early 2011, in time for Laputa’s 25th anniversary. The figure is 1/20 scale, so he stands about 7 inches tall and fully assembled, he has 36 points of articulation. The articulation isn’t super flexible; he won’t be getting into many crazy poses beyond standing/walking. The shoulders are quite mobile, but the hips, for instance, don’t do anything but move side-to-side. What’s there is perfectly serviceable, so I can’t really complain. The robots from Castle in the Sky actually have a pretty neat heritage; they were inspired by the robot attackers from the Fleisher Superman serial “Mechanical Monsters,” a serial that would also inspire similar robot designs in Lupin III, Batman: The Animated Series, and the film Sky Captain and the World of Tomorrow. As the Robot Soldier, he’s officially based on the first of the two main robots we see in the movie. It’s the harsher of the two designs, though it’s mostly just about the arms, which are all spikey here (in the movie, the spikes allow for wings, giving the robot the ability to fly). The sculpt does a pretty great job of capturing the design from the film, and making it look decent in three dimensions. The only real point of inaccuracy is the hips. In the film, they sort of round off into his waist, but on the figure, they end in a fairly straight line. In the figure’s defense, the hips of the robot in the movie are a classic case of cheating the angles. As they are shown in the movie, there’s no practical way for them to work, so they had to be tweaked. One of the best things about this guy’s sculpt is the texture work; the film is cel-animated, so the robots shown therein are mostly devoid of any real texture, just for the sake of easier animation. However, the shading and such of the ‘bots is done in such a way to suggest a slightly rough texture to them, were they to exist in real life. This figure has a nice, ripple-y effect on all of his pieces, barring the visor and neck. This gives the figure a visually intriguing look, and has the added benefit of hiding the imperfections and such caused by breaking the parts of the figure off of their mold trees. Also, it should be noted that, while many snap-kit figures tend to feel light-weight, and of a slightly lower quality than a mass-produced figure. This is not the case with this guy, who is easily the sturdiest kit I’ve put together, and feels not unlike a figure you might buy fully assembled. As with all snap kits, there there’s no paint on this guy. Some kits use stickers to make up for this, but this guy doesn’t, instead letting all the separate pieces be molded in the appropriate colors. This actually works really well, and he doesn’t feel lacking at all. The Robot is packed with a little scale figure of Pazu. He doesn’t have any articulation, and the lack of paint is plain as day here, but it’s cool to have gotten him. One thing I do feel is missing is some sort of an extra attachment to swap out for the lower half of the left arm. The main Robot Soldier we see in the movie is lacking said arm, so being able to showcase this look would have been nice.

THE ME HALF OF THE EQUATION

Until the last two years, I had never actually watched a Miyazaki film. This changed when I started dating Super Awesome Girlfriend, who is a huge fan of Miyazaki’s work. Castle in the Sky was the third of Miyazaki’s films I saw, and I fell in love with it immediately. The awesome Robots therein played no small part in this. After seeing the movie, I made an off-hand mention of how I wouldn’t mine owning a figure of one of the Robots. Super Awesome Girlfriend showed just how much she pay attention, and presented me with this kit as a Valentine’s Day gift this year. I then spent an hour or two putting the guy together, with a bit of help from my buddy Tim. This is an awesome figure, and I’m super thrilled to have gotten him. Easily my favorite of the snap-kits I’ve gotten, and just a great figure in general!

#0861: Sarah Connor

Posted by Ethan Wilson in Reviews and tagged with , , , ,

SARAH CONNOR

TERMINATOR 2 (NECA)

SarahConner1

The first time I really noticed NECA was when they kicked off their pretty awesome T2 line several years back. The line actually had a pretty decent run of figures, but, aside from a single Kyle Reese figure towards the end of the line, they mostly stuck to the killer robots from the future. That meant that one of the franchise’s key characters, Sarah Connor, was sadly missing. Recently, under their “Ultimate” heading, NECA’s gone back to some of their older lines, making some slight adjustments to prior figures to make them fit with current offerings. For a first in the Ultimate sub-set, they’ve released a totally new figure, offering a Sarah figure to go with the recent Ultimate T-800.

THE FIGURE ITSELF

SarahConner2Sarah Connor is the second “Ultimate” figure in the Terminator 2 line. She’s a single release, though she shipped right around the same time as the second version of the Terminator Genisys T-800. The figure stands 6 ¾ inches tall and she’s got 24 points of articulation. Technically, she should be little shorter to be in scale with the T-800(Linda Hamilton’s 8 inches shorter than Arnold in real line), but she’s really not that far off. As noted in the intro, Sarah is not a re-tooling like prior Ultimate releases; she is instead an all-new sculpt, handled by Adrienne Smith. Her basic look is her black tactical gear from the mid-point to climax of the film. It’s easily the character at her most distinctive, so it’s well-chosen. The proportions on the body are pretty much spot-on, including Linda Hamiliton’s impressively toned arms. Seriously, she was jacked, and so is this figure. Her clothes are incredibly well detailed, with tremendous texturing, and just the right amount of weight. To ensure the best poseablity for the torso, the webgear is a separate (non-removable) add-on piece. It has the same great work seen on the rest of the body, and some amazing little touches, such as the unfastened buckle at the top of the vest, which looks like it’s really a separate piece. She also has a separate belt piece (also non-removable), SarahConner3complete with a sheath for her knife. Like the Ultimate T-800, Sarah includes three different heads: Ponytailed with hat and sunglasses, ponytailed without hat and sunglasses, and hair untied (once again without the hat and sunglasses). Some people have complained about not getting another head with the ponytail and sunglasses, like she’s shown on the front of the box. While it’s a shame that look isn’t represented, if we could only have three heads, these are the three I want. The hat and sunglasses head is my favorite of the three. The likeness is the best here, the hat is fantastically detailed, and while the sunglasses aren’t quite as clean as the T-800s, they still look pretty cool. The other two heads are no slouches either, doing a nice job of capturing Sarah as she progresses through the movie. Sarah’s paintwork is pretty solidly handled; all the base colors are where they should be, and there’s some nice work differentiating the blacks of the various parts of her outfit. The heads show a bit of slop around the hairlines, but the overall paint looks quite nice, and I was especially impressed by how well the eyes turned out on the two non-sunglassed heads. In addition to the extra heads, Sarah includes an m4 carbine, a colt 1911, and a knife (complete with a sculpted tassel at the end) that fits perfectly in the sheath on her belt.

THE ME HALF OF THE EQUATION

I got Sarah at the same time I got Chopper, though she was more of an impulse buy than a planned purchase. I was a little underwhelmed by this figure when viewing her in the packaging, but once I had her out and posed her a bit, I really came to enjoy the figure a whole lot. She’s a worthy companion piece to the T-800 to be sure, and I’m happy she finally got made.

SarahConner4

#0860: Star Wars Mashers

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

LUKE SKYWALKER, HAN SOLO, DARTH VADER, STORM TROOPER, & SCOUT TROOPER

STAR WARS HERO MASHERS

ROTJMashers1

For a guy who’s not a huge fan of Hero Mashers, I sure do seem to be picking up a lot of these guys, don’t I? Yeah, I don’t really have an excuse. I’m a bit of a push over when it comes to certain things. But, hey, it means you guys get to keep reading about these figures. Isn’t that a plus? No? Well, sorry…

THE FIGURES THEMSELVES

This five-pack of figures was released not long after the onslaught of Star Wars-merch in September. It initially appeared to be a TRU-exclusive set, but has recently begun to show up at other retailers. All of the included figures are based on Return of the Jedi.

LUKE SKYWALKER

ROTJMashers2Luke makes his second appearance in the Mashers style here, based on his Jedi look from….Jedi. Specifically, he’s based on his look from towards the end of the film, after he’s ditched the vest and unbuttoned one side of his chest-flap-thingy. The figure stands 6 inches in height and he’s got 18 points of articulation. He’s got the same reduced shoulder movement that all the more recent Mashers have gotten, but I’ve really stopped noticing at this point. The figure shares his head with the Bespin version of Luke from the two-pack. That’s nice from a consistency standpoint (even if Hamill does look different in the two films…) and the actual sculpt does a pretty nice job of tweaking Hamill’s likeness to fit the style. The rest of the sculpt is unique to this figure, and it’s a pretty sharp sculpt. This particular design definitely transfers well to the Mashers aesthetic. Like every Mashers figure, Luke can be disassembled at the neck, elbows, hips, and knees, and his parts are interchangeable with the rest of the line (if you’re into that sort of thing…). Luke’s paintwork is generally pretty simple; it’s limited to the face and chest, with some slight finish variance on the glove and boots. There’s an odd spot of silver on one side of my figure’s collar, but aside from that, the application is pretty clean. Luke is packed with his green lightsaber from the movie, which is so far unique to this set.

HAN SOLO

ROTJMashers3After getting his styling jacketed look in the two-packs, this Han returns him to his classic vested look (albeit the slightly less classic variant of it from Jedi). Han’s sculpt is mostly the same as that of the two-pack figure, with only a new torso piece. The re-use isn’t too terrible, but it does mean Han’s got pockets on each arm, which isn’t accurate. The overall sculpt isn’t bad, but Han doesn’t seem to have translated as well to the Mashers style as Luke. The head in particular just seems far too generic for Harrison Ford. Also, this figure’s hips seem particularly wideset. An additional note: Han’s hands are separate pieces from the forearms. They aren’t designed to be removable, but they might pop off if you aren’t paying attention. Han’s paint is a bit more complex than Luke’s, and it’s handled pretty well. There are a few fuzzy lines, but nothing really terrible. Han is packed with his signature blaster. It’s got a blaster bolt permanently attached, which looks a little odd in a basic pose, but does add some nice flare in an action set-up.

DARTH VADER

ROTJMashers4I’ve actually reviewed a lot of this guy before. Vader, unlike the others in this set, goes for a very scene specific look. Namely, the scene where he’s getting electrocuted by the Emperor. That seems a little morbid for a kid-aimed toyline, but okay! The torso, upper arms, legs, cape, and skirt are all exactly the same as the single-release Vader. Same sculpt, same paint, same everything. What’s new are the head and lower arms, which take the previously used pieces, add a bit of “electricity” detailing to them, and cast them in a cool translucent blue. Of course, to be truly accurate to the scene, he should be missing his right hand, but I guess that would be too morbid for the kid’s toy. Vader is packed with the same extra as his single-packed counterpart, a lightsaber, as well as two electricity effect pieces.

STORMTROOPER

ROTJMashers6And now for the set’s one straight re-pack, the Imperial Stormtrooper! Yes, this guy’s the same exact figure as the single-packed version. But come on, it’s a Stormtrooper! You can’t have too many of these guys, right? The design definitely fits the style very well, and he’s helped by the totally armored look. He’s easily got the sharpest detailing of the figures included here, which definitely helps the overall look. The one major nit with the sculpt is more an articulation issue than anything; since his elbows only swing forward and back, he can’t actually hold a blaster two-handed. Also, like Han, the hands are separate pieces, glued in place. The Stormtrooper’s paint is generally pretty decent, though the black is a little sloppy in a few spots, and there are a few bits of slop. It’s all relatively minor, though. He’s packed with a standard trooper blaster, which, like Han’s, has a blaster bolt permanently affixed. Consistency!

SCOUT TROOPER

ROTJMashers5Last, and very much not least, it’s the Scout Trooper! By far my favorite Trooper design from the OT, and also the one totally new figure included in this set. The Scout Trooper’s design is already pretty chunky and blocky, so it translates very nicely to the Mashers style, and doesn’t look quite as cartoony as some of the other figures. The general quality of the sculpt is pretty great. Some of the details are a bit on the soft side, especially on the torso, but he’s no worse than other Masher figures. The one thing that knocks this figure down a peg is his paint. It’s not terrible or anything, but there’s definitely a fair bit of bleed over, and the edges of the white paint are all pretty fuzzy. From a slight distance, he looks fine, but up close he’s a bit off. The Scout Trooper includes a small blaster, which has the affixed blast, just like the other two. Three for three!

THE ME HALF OF THE EQUATION

“Ethan, if you aren’t a huge fan of Mashers, then why did you buy this big set of figures?” The answer is simple, hypothetical reader: Scout Trooper. I have an unhealthy addiction to Scout Trooper action figures. It was just my luck that this guy had to be part of a big boxed set. Due to the slightly high price tag of the set, I actually passed on it several times. However, last month, I was at Target, and they had this set for half-price. For $25, I figured it was worth it. I don’t regret this purchase in the slightest. The Scout Trooper is definitely my favorite, but the basic Stormtrooper and Luke are pretty awesome too. Han’s not really my preferred version and I can take or leave Vader, but the overall set is actually pretty fun.

ROTJMashers7

#0859: Perseus

Posted by Ethan Wilson in Reviews and tagged with , ,

PERSEUS

CLASH OF THE TITANS (MATTEL)

Perseus1

The incredible success of Star Wars and its associated merchandise was something that just about everyone was looking to cash in on in the late 70s/early 80s. Kenner had struck gold with their 3 ¾ inch line, leading to a number of imitators, hoping to get a slice of that success. Mattel tried a number of different lines, based on various sci-fi and fantasy properties of the time, each very clearly based on the Kenner aesthetic. One such line was Clash of the Titans, based on the 1981 film. The line was far from a smash success, and only managed to produce four basic figures and two larger creatures. Today, I’ll be looking at their figure of the film’s hero, Perseus.

THE FIGURE ITSELF

Perseus2Perseus was part of the first, and only, series of Clash of the Titans figures from 1981. The figure stands just shy of 4 inches tall (making him pretty tall for the time) and has 5 points of articulation. While the sculpt was clearly designed to mimic the Kenner figures of the time, this figure is noticeably less sturdy than his Kenner compatriots. For a classic Greek hero, he sure is scrawny. The sculpt is okay overall, but there are a number of odd things going on with it. The legs/pelvis area is definitely pretty weird looking; in the movie, he’s wearing a long tunic sort of a thing, but here it’s been transformed into an odd, squared off diaper thing. And that’s not even addressing the fact that his legs don’t appear to actually connect to his torso. His torso sports a strap that abruptly ends at the hip. In the film, this strap is connected to his scabbard, but Mattel wanted to be able to have Perseus share his legs with Thallo, so there was no scabbard to be had. The head probably exhibits the best work of the sculpt, but it’s still not all there. I can kind of see Harry Hamlin in this sculpt, but he looks a bit exaggerated, and almost has a sinister, scheming air about him, which hardly seems right for the film’s hero. Perseus’s paint is faitlu basic. One shade of brown for his hair, boots, bracelets, and eyes, another for his strap, and a light beige for his tunic. It’s nothing amazing, but it’s all pretty clean. Plus, he got eyes, which means he fared far better than any of the humans from Mattel’s Battlestar Galactica line! Perseus was originally packed with a sword and his shield, the Aegis, but my figure doesn’t have those.

THE ME HALF OF THE EQUATION

I’ve actually never seen Clash of the Titans. I’ve seen clips from it, I’ve heard the soundtrack, but I’ve never seen the movie. However, I’m a bit of a Greek mythology geek, and I’m also a huge action figure geek (try not to be too shocked). So, when I found this guy in a box of loose figures at a flea market last month, I was actually kind of excited. As usual, it’s a Mattel product that’s nowhere near the competing product of the time in terms of quality, but I kind of have a soft spot for this figure. And one of these days I’ll get around to watching the movie…

Perseus3