Category Archives: Reviews

#0855: Capture Net Superman

Posted by Ethan Wilson in Reviews and tagged with , , , ,

CAPTURE NET SUPERMAN

SUPERMAN: THE ANIMATED SERIES (KENNER)

SupermanCN1

In the 1990s, the vast majority of Kenner’s DC Comics output was TV and movie based. They struck veritable gold with the Batman franchise, which included the incredibly popular Batman: The Animated Series. When Superman got his own cartoon, Kenner tried to recapture the success of Batman’s toyline, but never quite hit that same spot, for a number of reasons. There were plenty of wacky Super-variants to be had. Today, we’ll be looking at Capture Net Superman, who, like Combat Belt Batman before him, was a standard version of the main character masquerading as a wacky variant.

THE FIGURE ITSELF

SupermanCN2Capture Net Superman was part of the first series of Kenner’s Superman: The Animated Series line. Of the seven Superman variants released in the first series, he was one of two that could be classified as a “normal” Superman, and since the other one was saddled with a quick-change feature, this was the one most people considered the “default.” The figure stands 5 inches tall and has 6 points of articulation. The S:TAS figures were all about that waist movement! Of all the figures offered in this line, this Superman has the virtue of being the most on-model. Of course, that only makes him the closest of the off-model figures, which isn’t saying a whole lot. The figure’s upper half isn’t too far off. The head is a little more elongated than it should be, and is certainly not as nice as a few of the later offerings, but it’s not terrible. The torso and arms are a bit more muscular than the show design, but once again, not terrible. The cape is a fairly decent match for the show, so that’s good. The design kind of goes off the rails on the legs; one of the staples of the Bruce Timm aesthetic is the streamlined nature of the legs. That’s definitely not shown here. They’re a perfectly fine sculpt, but they’re just not accurate. As a whole, the sculpt is nice and clean, and is certainly pleasing to look at, but it falls short of the show design. Superman’s paint work is generally pretty good, apart from one small issue. See, my figure is one of the initial wave of figures, which were rushed into production to be in stores by the time of the cartoon’s premier. Instead of proper eye detailing, corners were cut, and he instead has a solid black blob in place of his eye. Later waves would correct this issue, but no such luck on my figure. It’s a little odd, but honestly not that bad once you move past it. The rest of the paint is nice and bright, and makes him stand out quite nicely. The blue’s probably a little too bright to be show accurate, but why start being accurate now? The figure’s name comes from his one accessory, which is a big missile launcher thing, which fires two missiles with a net attached. As goofy as it is, it’s actually kinda cool, especially since the net is shaped and painted like his logo.

 THE ME HALF OF THE EQUATION

Despite being a fan of the cartoon and having several of the figures growing up, I only got this figure last summer (Quick Change was always my default Superman). I found him in the dealer’s room at Shore Leave and kind of impulse bought him. He doesn’t exactly offer anything new or groundbreaking, but he’s a fun figure.

#0854: Sgt Stalker

Posted by Ethan Wilson in Reviews and tagged with , , ,

SGT. STALKER

G.I. JOE: 30TH ANNIVERSARY

Stalker30a

G.I. Joe’s switch to the smaller scale is probably one of the most successful re-brandings ever. For most, those smaller figures simply are G.I. Joe. When the line was initially launched, there were 13 figures. They were all unique, but they were specifically designed to make the most of as little tooling as possible. Today’s subject, Sgt. Stalker, was among those 13, though he was just “Stalker” at the time. When it came time to celebrate the 30th Anniversary of the smaller line, Stalker was chosen as the representative of the Original 13, with a reimagining of his first figure, in a more modern aesthetic.

THE FIGURE ITSELF

Stalker30bSgt. Stalker was released in the first series of G.I. Joe: 30th Anniversary figures. The actual anniversary year was 2012, but the 30th figures were rushed into the end of 2011, in order to make way for the G.I. Joe: Retaliation toys. Of course, Retaliation was then pushed back to 2013, making the rushed release of the 30th figures completely pointless. Yay. The figure is a little over 3 ¾ inches tall and has 24 points of articulation. While the later series of the line would release a wide variety of newly sculpted parts, the first series got by on as much re-use as possible, and Stalker was not exempt. The head is re-used from the Resolute version of the character. My feelings on this are a bit mixed. While it’s not a bad head at all, it has the Resolute design’s dreadlocks. Those fit in fine with the more exaggerated Resolute designs, but they look just a bit out of place on the more realistic figure, especially one that’s supposed to be an update on his original figure. The rest of the figure is repurposed from one of the Pursuit of Cobra Snake Eyes figures. That figure was itself meant to be an update on Snake Eyes’ original figure, and given that the original Snake Eyes and Stalker figures used the same body sculpt, this actually makes a lot of sense. It helps that it’s a really nicely sculpted body, with some amazing small detail work, especially on the underlying turtleneck piece. The body is so Stalker30cattentive to detail that it even has removable knee-pads, which is a pretty awesome touch. To differentiate him a bit from Snake Eyes, Stalker gets a different web gear piece, which was first seen on the Jungle Patrol Dutch Duke from PoC. Stalker’s paint is fairly decent, and is clearly meant to emulate his original design, but I can’t help but feel he’s a bit drab, especially when compared to some of the other 30th figures. Still, he doesn’t look bad at all. Perhaps the figure’s strongest suit is his accessory complement. He has a submachine gun, a pistol with a removable silencer, a pistol without silencer, a machete, a knife, a small sword, and a display stand with his name on it.

THE ME HALF OF THE EQUATION

By the time the 30th figures starting hitting, I had long since realized that finding the G.I. Joes I wanted in stores was not a thing that would be happening. So, I had resorted to ordering full sets of each series from Big Bad Toy Store. I hadn’t planned on getting Stalker at first, being content with the Resolute figure, but I wanted the rest of Series 1, so I got him anyway. I’m actually really glad I got him. Yes, I’d have liked for him to get a new head, but other than that (honestly minor) issue, he’s a pretty darn fun figure, who reminds me just why I loved this line so much.

#0853: BB-8, Jakku Scavenger, & Unkar’s Thug

Posted by Ethan Wilson in Reviews and tagged with , , ,

BB-8, JAKKU SCAVENGER, & UNKAR’S THUG

STAR WARS: THE FORCE AWAKENS

BB8Scavengers1

Star Wars has characters of every shape and size, which can make things difficult when it comes to doing properly scaled action figure lines. Sure, the likes of Luke, Leia, or Han can all be more or less the same basic size and price point, but how do you handle outliers like Chewbacca or R2D2? Well, Kenner always went for an approach of letting the averages work out, pricing them the same as the others. Of course, then came The Force Awakens, which gave us BB-8, who was far too small to realistically sell by himself. The solution so far has been to pack him in with larger characters. In the Black Series, he was packed with Rey,and for the smaller scale line, he was packed with two of the lesser known Jakku characters. I’ll be looking at the smaller BB-8 and his two companions today.

THE FIGURES THEMSELVES

These three were part the the multi-pack assortment of Star Wars: The Force Awakens figures, which hit at about the same time as the second assortment of single figures.

BB-8

BB8Scavengers4He may be the smallest, but BB-8’s definitely the “draw” for this set, with this being one of the only two ways to get him in this smaller scale. The figure is about 1 ½ inches tall and has 1 point of articulation. BB-8 has a new sculpt, which does a pretty spot-on job of capturing his movie look. While the larger BB-8 was a more exact duplicate of the onscreen look, this figure has flattened the bottom of the body. While it’s not technically accurate, it does make this particular BB-8 much more stable, which is much appreciated. The paintwork on BB-8 isn’t the most involved work ever, but it gets all the basic work done. He’s orange and white and the colors mostly go where they’re supposed to. Some of the lines could probably stand to be a little cleaner, but that’s about it.

JAKKU SCAVENGER

BB8Scavengers2This figure is officially billed as “Jakku Scavenger,” but he does have an actual name. He’s Teedo. He’s called that, by Rey, in the film, and his bio on the back of the box even calls him that. So it’s a little odd that Jakku Scavenger is his official title. Oh well. The figure stands 2 ¾ inches tall and has the now standard 5 points of articulation. Teedo’s design harkens back to the OT in a lot of ways, looking like a cross between a Jawa and a Tusken Raider. The sculpt of this figure does a nice job of capturing his look, and offers a lot of really great detail work, especially on the body wraps. Some of the various stuff attached to him could stand to be a little more defined, though, as it has a tendency to blend in with the rest of his body. The paint on Teedo is decent, but like BB-8, it’s not anything super amazing. It gets the job done. Teedo includes a big giant missile launcher thing, with a net attachment. Gotta give them at least some credit for being pseudo accurate.

UNKAR’S THUG

BB8Scavengers3This guy is by far the most minor of the three characters included. He’s so minor he doesn’t even get a name. He’s the possessive of another character. That’s gotta suck. He’s the tallest of the three at a full 4 inches tall. He’s technically got the usual 5 points of articulation, but the nature of his hood renders the neck joint pretty much null. The Thug’s sculpt appears to be all-new to him; it’s a decent sculpt, though the design it’s replicating isn’t the most exciting look of all time. The mask/goggles are pretty cool, but other than that, he’s really just a mix-match of various common pieces of clothing. Still, the sculpt makes those parts look pretty cool, and he’s on par with most of the others in terms of quality. His paint is handled pretty well. He’s pretty muted, but it works, and all of the application is pretty clean, so that’s good. The Thug includes a staff (I think it’s supposed to go with him), and a small blaster pistol.

THE ME HALF OF THE EQUATION

This was the hardest to find of the multi-packs, so I didn’t get this one until after I’d seen the movie. I ended up getting these three at the same time as Rey’s Speeder. I actually really like this set a lot. BB-8 is clearly the main draw, and while he’s not as cool as the Black Series version, but he’s still pretty nifty. Teedo is a really fun figure of a neat background character. Unkar’s Thug isn’t the most exciting figure here, but he’s a solid figure, and he fills up the back of the display quite well.

BB8Scavengers5

#0852: Tri-Klops

Posted by Ethan Wilson in Reviews and tagged with , , , ,

TRI-KLOPS

MASTERS OF THE UNIVERSE

TriClopsVint1

Mattel is a company most often remembered as the makers of Barbie, but pretty much since the inception of Barbie, they’ve been trying to capture an equivalent market, but more aimed at boys (for better or for worse). There first real try was a line called Big Jim, which was a sort of an odd mix of Barbie and G.I. Joe. It was a decent enough success, but certainly didn’t have the lasting power of Barbie. Their next attempt, Masters of the Universe, was far more successful, though it sort of comes and goes. The line was a fairly standard “heroes vs. villains” set-up, and one of my favorite villainous characters is Tri-Klops, who I’ll be looking at today.

THE FIGURE ITSELF

TriClopsVint2Tri-Klops is part of the 1983 series of the original Masters of the Universe line. The figure stands about 5 ½ inches tall and he’s got 6 points of articulation, as well as a rotating visor piece. Structurally, he’s the same as the basic He-Man figure, with his own unique head and armor piece. The base body is, of course, hysterically proportioned, but that’s kind of on purpose. He’s certainly very muscle-y. The character-specific parts haven’t aged quite as well as other MotU figures. While later Tri-Klops figures would put effort into giving him some interesting tech things going on with his visor, this one doesn’t do any of that; he’s got a simple ring with three eyes on it, each eye having a slightly different brow. That’s really it. Not the most exciting design work. His armor is a bit more interesting and ornate, though still rather basic.  As far as paint goes, Tri-Klops is pretty TriClopsVint3basic, relying mostly on molded colors. Whatpaint he does have is generally pretty clean, overlooking the obvious wear and tear from regular play. The one odd thing is the total lack of paint on the insides of the arms, leaving his armbands only half-existent. Tri-Klops originally included a sword (which was unique to him) and a weird, glow-in-the-dark skull ring thingy. My Tri-Klops, however, does not have these.

THE ME HALF OF THE EQUATION

Since I wasn’t alive in 1983, Tri-Klops was purchase second-hand. He’s actually a fairly recent addition to my collection, having only been purchased last December. I found him in an antique store near my family’s usual holiday vacation spot. I’ve always liked Tri-Klops, but I can’t say I have a huge affinity for his vintage look. Definitely a character whose 2002 design was the one I enjoyed the most. Still, not a bad figure, especially given when it was released.

#0851: Dr. Bunsen Honeydew & Beaker

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

DR. BUNSEN HONEYDEW & BEAKER

MUPPETS MINIMATES

HoneydueBeaker1

Over the years, the Minimates brand has covered some pretty out there properties, in addition to the more conventional ones. Recently, DST has begun pushing the boundaries of the Minimate body, seeing just how far they can take that base body, to create ‘mates of properties that might not seem to scream “Minimates” at first glance. One such property is The Muppets, which is very much defined by the unique, non-standard looks of the characters. So, let’s see how well this translation worked, starting off with two of my personal favorites, Dr. Bunsen Honeydew and his unfortunate assistant Beaker!

THE FIGURES THEMSELVES

Honeydew and Beaker are part of the first series of Muppets Minimates. There are two versions of them: clean and “lab mishap.” This review covers the “lab mishap” versions, but both versions of the pair are exclusive to Toys R Us.

DR. BUNSEN HONEYDEW

HoneydueBeaker2The “talker” of the two, Dr. Bunsen Honeydew, is the typical absent minded professor, cheerily bumbling through his various wacky experiments. He is shown here after the “fall out” of one of these experiments, with his clothes slightly singed, and his glasses out of place. The figure is about 2 ½ inches tall and has 12 points of articulation (no ankle movement here). In addition to the normal base body, Honeydew gets a slightly larger head and a slightly shorter set of lower legs. The head unfortunately has a peg hole at the top, so I guess this piece has been used before for someone with hair. It’s too bad they couldn’t seal off the hole, but oh well. He also has an add-on piece for his lab coat, which appears to be a new piece.  It’s closed up, which is a first for ‘mate lab coats. Honeydew’s paintwork is actually quite impressive. His face is fairly simple, but sums up the character pretty perfectly. And yes, he has a nose. It’s kinda weird, but seems kinda key to the likeness, so I’m okay with it. The skewed glasses are definitely cool, and the patterns on the shirt and tie are really great. The front of the figure has been misted with a brownish grey, making him look like he just got caught in the explosion. For accessories, Honeydew is packed with an Erlenmeyer flask filled with a purple liquid and a clear display stand.

BEAKER

HoneydueBeaker3By far the more sympathetic of the pair, Beaker is memorable for his signature “meep meep”s, and his propensity to get blown up and thrown through things. And just look at that adorable mug. How could you not love him? Beaker uses more of the standard body than Honeydew, with only his head being a special piece. It’s the same extended head that was first used on Sinestro, back in DC Minimates Series 8. He also gets an all-new hair piece, as well as the same lab coat used on Honeydew. The hair piece is definitely a highlight, and it’s very well detailed, though I wish the mold line was a little less present. Given Beaker’s rather slight frame on the show, translating to the ‘mate body is a bit tricky, but the figure manages to be a pretty good approximation of Beaker’s build. The paint on Beaker is fairly similar to Honeydew’s. He too possesses a nose, but it works, and the face is undoubtedly Beaker’s. The shoes are a little sloppy, but not terrible, and the patterns on his clothes are even nicer than Honeydew’s. Beaker is packed with another Erlenmeyer flask (the same mold as Honeydew’s), this time in green, and a clear display stand.

THE ME HALF OF THE EQUATION

I found Honeydew and Beaker at my local TRU while on the prowl for Star Wars stuff just after Christmas. I wasn’t sure about getting them, but Super Awesome Girlfriend was with me, and she was having none of that, so she bought them for me. Beaker’s always been one of my favorite Muppets, so I was pretty happy to get him, and you can’t have him without the good doctor. Since my store only had the “lab mishap” set in-stock, that’s the one I got, but I actually think it’s my preferred one of the two. All in all, a good start to the new line.

#0850: Falcon

Posted by Ethan Wilson in Reviews and tagged with , , , ,

FALCON

MARVEL UNIVERSE (HASBRO)

FalconMU1

Falcon is certainly a character who has picked up some serious notoriety in the last few years, and I gotta say, that makes me pretty darn happy. See, I’ve been a Falcon fan since Avengers: United They Stand (a cartoon that no one in their right mind would admit to liking. I kinda liked it…) and I’ve always found the guy pretty awesome. He’s actually been pretty fortunate in regards to figures, getting a figure in just about every major scale over the years, including Hasbro’s favorite, 3 ¾ inch, where he actually got TWO figures! I’ll be looking at the first of those today.

THE FIGURE ITSELF

FalconMU2Falcon was released in the 14th series of Hasbro’s Marvel Universe line, where he is listed as figure 013. The figure is roughly 4 inches tall and he has 22 points of articulation. The design of the figure is clearly based on one of his more recent costumes, but it’s not either of the modern costumes I’m familiar with. It’s actually a nice medium between the classic costume and the costume he was wearing just prior to becoming Captain America. Falcon is built on the medium-sized male body, first introduced with Guardian. It was definitely an improvement to some of the earlier base bodies, and aside from arms that can’t quite sit flush with the body, it’s actually a fairly nice sculpt. He gets a new head and forearms, as well as slightly tweaked upper arms, to allow for the wings. The new pieces are pretty decent overall; the head is a little bland, expression-wise, but it’s not bad, and the forearms sport some pretty nice detailing. His actual wings are separate pieces, and they work okay,but they aren’t as well done as prior Falcon figures. They’re only one piece, and they’re really only designed for him to have his arms above his head at like a 45 degree angle. Any other pose and they look incredibly awkward. Falcon’s paintwork is actually really nice. The base colors are well-chosen, and there’s some great accent work on the whites and reds, which helps prevent him from looking too boring. The figure is packed with his trusty sidekick Redwing and a display stand with his name on it.

THE ME HALF OF THE EQUATION

Falcon’s actually responsible for me having as many Marvel Universe figures as I do. I had a few figures, probably less than 10, when I found this guy at Target. It just so happened that they were having a Buy-One-Get-One-Half-Price special at the time, which led to me steadily picking up a whole bunch of what was currently in stock, and eventually led to me trying to get a complete line-up of every Avenger in this scale. And it’s all because of this guy.

#0849: First Order Legion Boxed Set

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CAPTAIN PHASMA, FIRST ORDER STORMTROOPER, RIOT CONTROL TROOPER, HEAVY ARTILLERY TROOPER, SNOWTROOPER, FLAME TROOPER, & TIE FIGHTER PILOT

STAR WARS: THE FORCE AWAKENS

FOLegion1

Staaaaaar Wars! Nothing but Staaaaar Wars! ….Okay, maybe not “nothing but Star Wars.” I do still have other stuff. But, the amount of Star Wars stuff getting reviewed recently compared to just how much Star Wars stuff I actually own does seem a little disproportionally large. I guess a new movie does that. So, how about some more Star Wars toys? I’ve certainly had quite a focus on many of The Force Awakens’ dashing heroes, so why don’t we have a hearty look at the other side, with this here First Order Troop set!

THE FIGURES THEMSELVES

These seven figures make up the “First Oder Legion” boxed set, which is part of the smaller-scale Star Wars: The Force Awakens line. The set is an Amazon exclusive, and, after a sizeable delay, it started shipping out in mid-January. Most of the included figures are simple repacks of regular release figures, though the Heavy Trooper and Riot Control Trooper are currently exclusive.

CAPTAIN PHASMA

FOLegion2One of the biggest reasons I got this set, due to her single carded figure being virtually impossible to find. While her part in the film made me glad I hadn’t shelled out the big bucks for her, I still liked her design enough that I wanted at least one figure of her. The figure is just over 4 inches tall and has the standard 5 points of articulation. The sculpt on id pretty decently handled; the details of her armor are all nicely carried out, and the under suit has some nice texture work. Her helmet exhibits some much finer detail work than the basic troopers, which is nice. She has just the slightest bit of a pose to her, which keeps her from having an awkward straight-up -and-down pose, without getting too extreme. The cape is a separate piece, made from a soft plastic material. I much prefer the plastic to cloth here, so I’m glad that’s the way Hasbro took it. The paintwork here is decent, but nothing to write home about. The somewhat flat silver plastic is definitely not as striking as the chrome-plated look from the film. Granted, the single release was like this too, but giving the exclusive version chrome plating would have been a nice way to incentivize this set for people who already had the single release. Oh well; she’s not that bad. Phasma is packed with her unique, gold-colored blaster, which she can hold reasonably well in either hand.

FIRST ORDER STORMTROOPER

FOLegion3Do you remember when I reviewed the Stormtrooper Commando included with the Assault Walker? Well, then you’ve more or less seen this guy already, minus that figure’s shoulder pauldron. That’s not to say the two are identical, though. The legs are just the slightest bit wider in stance, and, most importantly, the neck pegs are the same size as the ones used for the un-helmeted characters, allowing for easy swapping, which is a definite plus. Aside from those small changes, the sculpt looks very much the same outwardly as the Commando. It’s a good translation of the film design to the smaller scale. Once again, the paint is just a fairly straightforward white plastic with black detailing deal, which looks fairly decent. The black is definitely fuzzy around a few of the edges, but not terribly so. The Trooper includes a basic mid-sized blaster, which can be stored on his thigh, like all the other troopers.

RIOT CONTROL TROOPER

FOLegion4This is one of the two exclusive figures in this set. He has the notoriety of being the same class of trooper as the fan-favorite “TR-8TR” (who’s actual name was FN-2199). As far as the figure goes? Like his larger-scale counterpart, he’s just a basic trooper, with the addition of a few new accessories. He has the same blaster as the normal trooper, but in addition to it, he has his baton and shield. Both pieces are quite nicely sculpted, and very well painted. Perhaps the only downside is that the shield isn’t quite as nicely handled on the underside as the larger version. However, it’s also a lot easier to remove, so silver lining.

HEAVY ARTILLERY STORMTROOPER

FOLegion6This figure is the other exclusive figure in this set, and is one of the major reasons I picked it up. I really like the look of the Heavy Trooper. The figure is yet another variation of the basic trooper figure. This time, he gets a unique add-on for his web-gear, which appears to hold extra ammo of some sort. It’s a bit bulkier here than in the film, but that’s to be expected, and it’s not terribly far off. In addition to the vest piece, he also gets a larger, cannon-style gun, with three pieces to help it stand. He has some trouble holding it due to the limited articulation of the figure, but he looks alright just posed standing behind it.

SNOWTROOPER

FOLegion5Where would the Stormtroopers be without a few environment-specific variants? The original trilogy Snowtroopers were always a fan-favorite, so it’s no surprise that that was the first really environment-specific trooper to get an update (having a climax that took place at an arctic locale probably helped too). The figure is 3 ¾ inches tall and has the usual 5 points of articulation. The sculpt does a pretty good job of translating the design into figure form. Like Hux, this figure’s “skirt” piece has been made a part of the legs, though I feel it works far better here than it did on Hux. One thing I did notice about this figure was his rather present tilt forward, which can be a little frustrating. Aside from that, the sculpt is generally very nicely done. The paintwork on this figure is pretty basic (again), but still suffers from some of those fuzzy edges. The Snowtrooper includes a removable back pack, as well as a blaster with an extended stock.

FLAMETROOPER

Here’s the one figure in the set for whom I already owned the single-packed version. Yes, this figure is 100% identical to the regular release Flametrooper, minus the weird build-a-thing piece. Click here for my review of this figure.

TIE FIGHTER PILOT

FOLegion7The TIE Fighter pilot included here is different than the one included with the TIE Fighter. That figure had a removable helmet. While it was a cool idea, it ended up making the figure’s head a little large. So, this figure’s permanently attached helmet actually works to its advantage, giving us a more faithful rendition of the helmet design. He also has a noticeably different set of arms, which are just a bit longer and look more relaxed and natural than the other pilot’s. The paint on this figure is pretty basic, being mostly just black, with a few smaller details here and there. The insignias and small details are particularly sharp, and add some nice pop. The TIE Fighter pilot includes a small blaster.

THE ME HALF OF THE EQUATION

After being disappointed by Toys R Us’ midnite opening on Force Friday, I went home and took a look at what was available online, and wound up preordering this set from Amazon. It was originally supposed to hit in late September, just after the Force Friday stuff, but it was delayed until January. I was definitely bummed, but I decided to hold out and wait for it. I’m glad I did. Not only did I finally get a Phasma figure, but I also got one of my personal favorite Troopers (the Heavy Trooper), and one of the more important Trooper variants (the Riot Control Trooper). The other figures are all pretty solid too, and add a ton of value to the set. Plus, my First Order lineup expanded pretty quickly!

FOLegion9

#0848: Master Chief

Posted by Ethan Wilson in Reviews and tagged with , , , ,

MASTER CHIEF

HALO 5: GUARDIANS (MCFARLANE)

MasterChief1

If you’ve been following the coverage from Toy Fair, one of the big things announced was Mattel’s acquisition of the full Halo license. Previously, Mattel had the building blocks license, due to their purchase of Mega Blocks. Now they’ll be handling the figures proper as well, taking the license from current holders McFarlane, who have been doing the figures since Halo 3. That also means another scale change (to 6 inches), which is a bit of a frustrating point. Anyway, I actually do have a couple more McFarlane figures on the schedule to be reviewed, which includes the franchise’s main character, Master Chief.

THE FIGURE ITSELF

MasterChief2Master Chief was part of the first series of Halo 5: Guardians figures from McFarlane Toys. He’s one of the main release figures, and is available in all the major places. The figure stands roughly 5 inches tall and has 30 points of articulation. I’m still not sold on the hip joints on these later figures, but Chief manages to have some decent enough movement. Structurally, this figure looks to share most of its parts with the Halo 4 versions of the character. That’s reasonable, since his armor doesn’t appear to have changed all that much between the games. He has a slightly different head, which reflects some damage he has taken to his visor in the meantime. Generally speaking, the quality of the sculpt is downright superb. The detailing is incredibly intensive, which gives the figure a ton of great texture work. About the only complaint I can really think of is the arms, which, like Spartan Fred, seem almost as if they haven’t quite been put all the way together. It’s fine when he’s holding a rifle, but can look odd in a basic standing pose. In addition, there’s the usual complaint about the lack of trigger fingers, but at this point I barely even notice that. Chief’s paint is as much a work of art as the sculpt of the figure. He captures the basic colors of the Chief pretty well, but what really sells the figure is the addition of dry-brushed silver on many of the armored surfaces, which helps to sell Chief’s armor as being sufficiently worn-in. Master Chief includes an assault rifle (with a cool customized deco) and a magnum, both of which can be stowed, either on his thigh or his back.

THE ME HALF OF THE EQUATION

Well, I had a pretty sizeable Halo collection, and absolutely no Master Chief figures in it. That seemed wrong somehow. I ended up finding him at a Target I stopped by while on a shopping trip with Super Awesome Girlfriend and her best friend. I’m actually really happy with this figure, and I admire the level of detail included. It’s a shame McFarlane won’t be getting to do a full selection of Halo 5 figures.

#0847: Rey’s Speeder

Posted by Ethan Wilson in Reviews and tagged with , , , ,

REY’S SPEEDER (w/ REY)

STAR WARS: THE FORCE AWAKENS

ReySpeeder1

Remember a few days ago when I was talking about how I was still making my way through all the Star Wars stuff I bought over the holidays? Well, how about a little more of that? Before seeing The Force Awakens, I mostly stuck with the relatively inexpensive small-scale figures, on the off chance the movie wasn’t as awesome as I’d hoped. Once I had seen the film and knew just how cool it was, I went back and got a few of the larger items, specifically the vehicles. One of the cooler new vehicle designs was Rey’s speeder, seen during her opening scenes on Jakku. Hasbro put out a version of the vehicle in their 3 ¾ inch line, packed alongside its owner, Rey.

THE FIGURE ITSELF

ReySpeeder2The included Rey figure is based on her appearance while riding around on her speeder, when she has her head covered up (presumably to protect her face from the sand being flung at it at high speeds). The figure is 3 ¾ inches tall and (technically) has 5 points of articulation. I say technically because, while there’s definitely a neck joint under that head gear, there’s no way it’s getting any sort of motion. Also, the lack of any sort of knee joints (such as the ones sported by the Elite Speeder Bike’s Trooper figure) really hurts this figure’s ability to sit properly on her speeder. Structurally, you might think that this figure shared parts with the single release figure, however, there are no shared parts between the two. A few pieces (especially the legs) are quite close, but all of them are just slightly different. It’s odd, because a bit of re-use would seem perfectly excusable here. The new sculpt is decent enough. The arms seem a bit skinny and noodle-like, but ReySpeeder4aside from that, the proportions feel pretty balanced and she looks about right. The head/wrap looks really nice; it appears to be the same piece that was included with the small-scale The Black Series Rey. Regardless, it’s a really nice sculpt, with lots of cool texture work. The paintwork here is pretty standard for the rest of the basic figures; it’s not perfect, but it’s serviceable. Rey is packed with her staff, which is the same as the one included with the regular figure (albeit a bit more warped).

THE VEHICLE ITSELF

ReySpeeder3Rey’s speeder is certainly an intriguing design. It was dubbed the “popsicle speeder” by a number of fans, which I guess I can see, but I don’t mind it. Tim referred to it as an engine with a seat, which I think is quite apt. The speeder is 8 ½ inches long, 2 inches wide, and 3 inches tall. The two flaps on the back are articulated, but aside from that, it’s mostly just a hunk of plastic. Not that there’s a problem with that, though. The general structure of the speeder looks to be a pretty good match for what we saw on film (it’s perhaps a smidge too thin, but that’s really minor). The detail work is generally pretty nice, and everything looks to be about where it should be. The cargo net is a separate piece, however, the actual cargo beneath it is molded to the side of the speeder. Unfortunately, there are four rather obtrusive screws on the right side of the speeder, as well as a somewhat obvious button for the action feature on the left side, poking through the net. The button pops up the top of the speeder, revealing a missile launching cannon. You remember that from the movie, right? No? Okay, yeah, I think Hasbro may have added that. The paint on the speeder is a bit on the basic side; mostly it just uses straight colors. However, there are a few spots that actually look sufficiently worn, which is nice to see. There is, however, a fair bit of slop, especially around the edges of the machinery in the cargo net, which is less nice to see.

THE ME HALF OF THE EQUATION

After the whole Christmas holiday and seeing The Force Awakens twice in the space of a week, I was really eager to pick up a few more of the toys from the movie. Rey’s speeder ended up being one of the few items I was able to find at the rather picked-through Walmart nearby where I was staying. While this particular Rey has become a little less necessary now that I have the Black Series version, she’s not a terrible figure in her own right, and it’s nice to have a figure purely dedicated to this look. The speeder’s not perfect, but it’s certainly fun enough, and it’s a nice complement to the X-Wing and TIE Fighter.

#0846: Black Lightning

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

BLACK LIGHTNING

DC UNIVERSE CLASSICS

BlackLightingDCUC1

As much as I loved DC Universe Classics, the problems with the line (which were mainly distribution-based) cropped up pretty early in its run. While the first series received fairly even distribution, series 2 and 3 were fairly spotty in coverage (possibly due to slow sales on Series 1). By the time Series 4 came along, it seemed things had mostly been sorted (apart from the odd instance of several variants being easier to find than their regular counterparts). Then came Series 5. See, Walmart is notoriously difficult to work with, especially if you’re a toy maker. In order to carry a line, they’ll frequently demand an exclusive series. Because of this, they did not carry the first four series of the line. To ensure their support of future series, Series 5 was given to Walmart as an exclusive. Walmart under-ordered and ended up sending no more than a single case of figures to many of its stores, with some receiving none at all. The end result was one of the hardest to find series in the line, with individual figures commanding extraordinarily high prices on the aftermarket. Black Lightning, who was having a bit of a career revival at the time, had the misfortune of being one of the figures in this set.

THE FIGURE ITSELF

BlackLightningDCUC2Black Lightning was, as noted in the intro, released in the Walmart-exclusive fifth series of DC Universe Classics. The figure stands 6 ½ inches tall and has 25 points of articulation. Lightning uses his Ed Benes redesign from the relaunch of Justice League of America. It was his current look at the time, and it happens to be far less dated than his original and 90s looks. It also had the added benefit of not requiring much new tooling. He uses the mid-sized male buck, with a unique head sculpt. The buck is a decent match for Black Lightning’s build from the comics and it allows him to fit in seamlessly with the rest of the line. While it was top-notch at the time of its release, it’s starting to show its age a bit, especially at the shoulders. Also, the poor quality of the plastic on this particular series makes Lightning’s body prone to warping, and some tearing at the joints, which is a definite negative. The head sculpt is fairly decent; it does a fairly good job of capturing Lightning. It’s not super distinctive, but neither was Lightning at this point. Unfortunately, it’s got some pretty obvious mold scarring, which is made worse by the fact that he’s bald. He looks like he’s taken some damage. The paint work is okay but not great. The base colors are nice and vibrant, which is good, but some of the lines, particularly the yellow for the belt, are really fuzzy. Also, while the prototype for this figure had clear goggles, allowing his eyes to be seen, their totally opaque on the final figure. Lightning included no accessories of his own, but he did include a piece of the C-n-C for this series, Metallo.

THE ME HALF OF THE EQUATION

I had no luck finding any of Series 5 in stores when they were released, so I ended up having to buy this guy second-hand, without his Metallo piece. I was quite enjoying him in Justice League at the time, so I was glad to find him at a semi-reasonable price. The final figure is sadly a bit lacking, mostly due to the lower quality of the materials used for this figure. I’m happy I have him, but his lower quality contributed to me not going out of my way to find any of the others from this series.