#3531: Jean Grey

JEAN GREY

X-MEN CLASSICS (TOY BIZ)

Fun FiQ Fact #0010: Jean Grey’s Jim Lee costume has received 11 action figures since its debut.

As a kid, my introduction to the X-Men was the animated series, which drove my desire for the whole cast of characters in action figure form.  The toyline running concurrently with the show was actually comics-based, but still generally managed to get a lot of looks that were close enough to work.  There were, however, some omissions, as well as some…odd ways of doing figures.  Despite being a main character on the show, Jean’s only figure in the line proper for most of its run was a single Phoenix figure, which wasn’t her main get-up on the series.  That look got some action figure love, sure, but Toy Biz’s takes always felt a bit monkey’s paw-like; you’d get her, but at some sort of trade off.  My search for a good one ran for a good number of years.  The closest I got was in 2000, and it was a figure that I was honestly pretty thrilled to get, even though she’s maybe not the most thrilling figure at the end of it all.  Still, here she is!

THE FIGURE ITSELF

Jean Grey is part of Toy Biz’s X-Men Classics line, which they launched in 2000 to run some old molds in new packaging between the toys for X-Men: The Movie and X-Men: Evolution.  While most of the figures were minor tweaks to existing releases, the Battle Blasters figures all got more substantial tweaks, in order to make them less Age of Apocalypse-inspired and more standard.  The figure stands 5 inches tall and has 5 points of articulation.  Her mold is almost identical to the original “Secret Weapon Force” release, which was just the Jean mold that Toy Biz had on hand at the time, I guess.  It does at the very least fill in the etched lines for the boots and gloves from the mold’s original use as Mystique.  For all of the re-uses the body saw during Toy Biz’s run, I do believe this is the only time they got rid of those.  It definitely helps with the overall look.  The mold’s not bad; the body is basic, and the head, while definitely more dialed into the AoA version of the character, isn’t horrible.  The main change-up, obviously, is the paint, which now puts her in her Jim Lee costume…or at least something close to it.  There are some sculpted details that don’t line up; the hair’s too short, and she lacks the shoulder pads and leg pouches.  That’s kind of expected, and it’s certainly closer than the other repaint they did for this costume.  The only thing that really stands out to me as “off” is the hands being yellow, but even that was a back and forth thing, with it only more recently being decided that she didn’t wear gloves with the costume.  This Jean release got the exact same accessory as her original “Secret Weapon” release: the Catapult Tank Blaster.  It’s a big green and black thing, and it’s hella goofy.  But, hey, at least I got two of them, right?

THE ME REMAINDER OF THE EQUATION

I vividly recall finding this figure in a Toys R Us, early December, still in post-X-Men: The Movie bliss, and being absolutely thrilled.  Then less so, because it was early December, which was typically a time of no toy purchases, what with the inevitable onslaught of figures I’d be getting as Christmas gifts.  My parents, however, recognized the significance of the figure, and allowed me to break their usual rule, so that I could finally have the Jean Grey I’d been waiting so long for.  She’s not much to write home about; she’s just the Secret Weapon Force Jean with a new deco, and that one wasn’t anything special either.  But, I was always very happy with her, and she’s still pretty nifty, even if there are better Jim Lee style Jeans these days.

#3530: Blade

BLADE

MARVEL LEGENDS (HASBRO)

Fun FiQ Fact #0009: Blade’s first Marvel Legends figure was movie based, and it would take until 2017 for him to actually get a comics-based Legend.  At least the follow-up wasn’t *quite* that bad.

My first introduction to Blade was Spider-Man: The Animated Series, a depiction that made me not jive so much with the Wesley Snipes version of the character from the first movie.  In my defense, I was also kind of 5, and an R-rated super hero movie really wasn’t for me.  Whatever the case, it’s kind of created a division between me and the character, so I never really got into him, beyond perhaps the novelty of him and Moon Knight being each other’s equivalent marks in Marvel’s ’70s horror books.  I do really like his ’70s design, hokey as it may be, but that one’s been rather light on the toy coverage.  As it stands, I haven’t actually owned a Blade figure at all…until now.  How about that?

THE FIGURE ITSELF

Blade is figure 2 in the Mindless One Series of Marvel Legends.  It’s a Marvel Knights themed set, and he definitely vibes with that (enough that he’s been in both of the two Knights assortments).  Despite including a Build-A-Figure piece, Blade’s this assortment’s double pack.  It makes sense, given how popular his prior figures have been, but it definitely feels like it may have been a late call on Hasbro’s part.  The figure stands just shy of 6 1/2 inches tall and he has 32 points of articulation.  Construction wise, he’s using the torso from the last Blade, as well as the arms from ’90s Havok.  Beyond that, he appears to be an all-new set-up.  The sculpt for this guy is pretty solid.  The only real downside I can really find is that his arms can’t really sit flush with his torso, but that’s always been an issue with this mold.  The design here looks to be an amalgamation of a few Blade designs from over the years, settling on something that generally approximates the overall vibe of his early ’00s appearances, post live action movie redesign.  It’s not first appearance Blade, but it’s certainly a very memorable take on him, so I get it.  It’s also very definitely a post-bitten by Morbius Blade, as the headsculpt so clearly shows, with his vampire teeth-baring expression.  It’s certainly a far cry from the last figure’s very pointedly calm expression.  It’s quite dynamic, to be sure.  Blade’s color work is very dark, as expected.  It’s not all strictly black, though.  The jacket and boots are, but the body beneath is a dark grey, and he’s even got a red lining on the coat.  There’s not a ton of paint, with it mostly being limited to the head.  What’s there is very cleanly applied, though.  Blade is packed with a sword, two stakes, two hand-held blade thingies, two pairs of hands (gripping and fists), and the head and energy effect to the Mindless One Build-A-Figure.  That’s actually quite a lot, making Blade one of the few Legends recently to not feel at all light on on extras.  I’d personally have liked an extra head, but I can’t fault them for going with what they did.

THE ME REMAINDER OF THE EQUATION

I was prepared not to be all that into this figure.  Like I said, my attachment to Blade is minimal.  But, I get *why* this figure got made, and I do like this design more than any of the prior releases.  Ultimately, I was pleasantly surprised by this one.  He’s actually pretty fun.  I’m still holding out hope on that ’70s style Blade sometime soon, but until then, this guy’s a respectable stand-in.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3529: Professor Huyang

PROFESSOR HUYANG

STAR WARS: THE BLACK SERIES (HASBRO)

Fun FiQ Fact #0008: Huyang’s actor David Tennant is one of two actors in Ahsoka to reprise a role they originated.

While I pretty faithfully watched the first two seasons or two of Clone Wars‘ original run, after that my viewing got rather spotty, so I missed a lot of its later additions to the lore.  As such, my first exposure to a lot of its later characters happened during my first proper watch-through, which I did after the whole series got added to Disney+ at launch in 2019.  David Tennant’s Huyang hails from a set of episodes that  otherwise didn’t really care for, but he was certainly a pleasant surprise.  It was a shame that he came into the picture after the tie-in toyline had started to die down.  Thankfully, he was brought back for Ahsoka, giving him another go at this whole action figure thing!

THE FIGURE ITSELF

Professor Huyang is figure 7 in the Ahsoka sub-set of Star Wars: The Black Series‘ Phase IV run, and is the third and final Ahsoka-themed figure in the last assortment to hit last year.  This is Huyang’s first figure, but he’ll also be getting a Vintage Collection release later down the line.  The figure stands 6 1/4 inches tall and he has 29 points of articulation on his core body, plus an extra 6 points granted by the arms on his back-pack. Huyang has a generally pretty decently handled articulation scheme, especially for his design. His right shoulder is a little stuck and stubborn on my copy, and the skirt piece restricts the hip movement a touch, but the range is otherwise pretty impressive, and I was surprised by how stable he was on his feet. The sculpt is an all-new one, and it’s a rather good one at that. Huyang’s design from the show is replicated well, especially when it comes to the more intricate details of his robotic plating. The wiring at the midsection is a little soft, but not terribly so. Huyang’s color work relies pretty heavily on molded plastic, and I’m typically not a huge fan of that when it comes to metallic finishes. In Huyang’s case, I find it doesn’t bug me as much. In the show, he’s not really got the same metallic look as other droids, and this plastic’s also not the swirly kind, so it just works out better. There’s still a fair bit of paint, which is cleanly applied, and hits most of the marks it needs to. The only spot that really feels as though it’s missing application is the tool belt, which is untouched, except for the buckle. Huyang is packed with his pack with the extra arms, a data pad, and a…tool? I don’t know what it is, and even the Hasbro photographers have him holding it quizzically in the stock shots, so it appears even they don’t know for sure. Hey, it’s better that nothing, right?

THE ME REMAINDER OF THE EQUATION

I like droids and I like David Tennant, so it makes sense that I’d like Huyang. After Mary Elizabeth Winstead’s Hera, Huyang was my favorite part of Ahsoka, and his figure is probably the most I’ve truly enjoyed a Black Series figure in a little while.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3528: Daredevil

DAREDEVIL

MARVEL LEGENDS (HASBRO)

Fun FiQ Fact #0007:  This is the 20th Daredevil figure I’ve looked at here on the site! Sub-FiQ Fact, I know I just used this for Nightwing last week, but it’s also amusing that the two baton boy acrobats are so close in numbers, right?

I’ve been off and on with Daredevil’s comic runs pretty much since I started reading comics.  Waid and Samnee’s run from a few years back is one of my absolute favorite comics runs ever, and I dropped off the book for a bit after that because, well, how do you follow that up?  I jumped back in with Chip Zdarsky’s run when it started, and while it didn’t hook me quite the same way as the Waid/Samnee run, it was still a strong run in its own right.  It removes Matt from the title role for a while, granting Elektra the spotlight, but when Matt came back, he got a swanky new look, and I’m pretty much always down for a new Daredevil look.

THE FIGURE ITSELF

Daredevil is the unnumbered figure in the Mindless One Series of Marvel Legends, which is our second Marvel Knights-themed series, following up on the Man-Thing Series from way back in 2017.  Curiously, while DD is the unnumbered figure and is sans-BaF piece, he’s *not* the set’s double pack in the case, which is a bit of a change-up to how things normally are.  The figure stands 6 1/4 inches tall and he has 30 points of articulation.  His articulation set-up is notably a little stiff, especially for a character like Matt, but its generally comparable to the Bucky Cape base that he’s been on previously, I suppose.  It’s also pinless, so at least it looks pretty smooth.  Matt gets a brand new sculpt, based on his “King Daredevil” look from the comics.  It’s essentially taking the costume Elektra was wearing during her time with the mantle and adapting to Matt, which isn’t a terrible way of handling things.  Since taking up the look was preceded by Matt doing a stint in prison, he grew out a beard, which is probably the biggest real visual change, though he also gains a lot more black, as well as adding wraps on the feet to the handwraps that have become a go-to for modern updates to the DD look. The sculpt generally translates the look into figure form pretty decently, with the only specific nit being that his collar piece is missing the hood section from the comics. It sort of came and went there, though, so it’s possible it was actually meant to be a separate piece. Otherwise, the sculpt conveys the book design well, and there’s plenty of depth of detail mixed in. His color work is pretty basic, largely relying on molded colors. Weirdly, his shoulder joints are molded in red, despite them only being visible in sections of the shoulder that are black, which is annoying. Also, his ears wind up being painted to match his beard, which is just plain incorrect. At least the red/black break up is very clean. DD is packed with his usual two piece billy club set-up, as well as a longer bladed staff. It definitely feels light. At the very least, some extra hands would be appreciated, but a hood piece would also have been nice.

THE ME REMAINDER OF THE EQUATION

This guy felt pretty inevitable once we got the Elektra version, and it was ultimately his announcement that truly sold me on that figure. I dig a good Matt DD variant. This one isn’t as strong as other recent DD figures, but he’s still a respectably fun figure in his own right.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3527: Orko

ORKO

MASTERS OF THE UNIVERSE REACTION FIGURES (SUPER 7)

Fun FiQ Fact #0006: In both the original ’80s Filmation Masters of the Universe and the 2002 re-boot, Orko and Mekaneck share a voice actor, Filmation founder Lou Scheimer in the ’80s and Gabe Khouth in the ’00s.

I’m not a hardcore Masters of the Universe fan by any means, but I’ve got a shortlist of three characters that I like to have in every possible style.  Number three on that list is He-Man’s plucky comic relief sidekick Orko, who I’ve had a soft spot for since I was rather young.  Yes, kid me saw the appeal of the kid-appeal character.  I was an easy target.  Super 7’s ReAction line is an ill-explored one in my collection, but I did get the Mekaneck back when he first hit, but I passed on Orko at the time, and he sold out.  He has eluded me for a bit, but no figure escapes me forever.  Oh, no.  I’m like a mounty: I always get my man.  Or…you know, action figure.  I’m like an action figure mounty.  Sure, let’s go with that.

THE FIGURE ITSELF

Orko was part of Series 2 of the Masters of the Universe ReAction Figures, which is interestingly enough, the same one that had Mekaneck.  The figure stands 2 1/2 inches tall and he has 5 points of articulation.  Orko doesn’t tend to get the same articulation as the rest of the characters, but this one actually gets the same set-up as everyone else, giving him some of the best mobility of any Orko figure.  He actually has “legs” to move, which is unique to this particular Orko.  As per usual for the character, Orko gets a unique sculpt.  It captures the style of the line nicely, and also requires less adjustments to his character design than some of the others.  His arms are a little longer, but not by much, and overall, he gets all the important details you need to sell Orko’s look.  Orko’s color work is his usual set-up; the paint work is a little spotty on the ears (a classic issue with Orko figures), but otherwise it’s pretty clean.  Orko is packed with his wand, which for this release is just a simple yellow cylinder, rather than anything more ornate.

THE ME REMAINDER OF THE EQUATION

Since I missed out on grabbing Orko from All Time back when he was new, I’ve been waiting for one to come through, and one did indeed, just last week, in fact.  I’ve been stepping back my pick-ups recently, but he was worthy enough to bring home.  He’s a fun little version of the character.  Plus, he gave me an excuse to introduce my daughter to Orko, which is always a fun time!

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3526: Nightwing

NIGHTWING

DC MULTIVERSE (MCFARLANE TOYS)

Fun FiQ Fact #0005:  This is my second Nightwing of the week and my 21st Nightwing review in the history of the site!  They can drink now!

In case you haven’t noticed, I do like me some Nightwing figures.  I’m generally not super picky about them, at least as far as quality is concerned, which is why I tend to wind up going back to certain wells for more and more punishment.  One such well is the McFarlane well.  McFarlane has made five Nightwings thus far.  I got the first one, and I was honestly rather letdown.  So letdown that I didn’t even keep him.  I got rid of a Nightwing.  That’s gotta say something, right?  I’ve looked at all of the others as they’ve shown up in front of me, and I’ve just known I’d be disappointed again.  And now I’ve actually gone and gotten one.  Am I gonna be disappointed?  Let’s find out!

THE FIGURE ITSELF

Nightwing is part of the Titans series of DC Multiverse, which was a mass-release set of Build-A-Figure part-bearing figures, which hit mid-last year.  They’re kind of a mix of designs, mostly on the modern side.  For his part, Nightwing appears to based on his most current design from his solo book, which is actually a pretty solid look.  It’s very similar to his Hush look, but with a dash of animated thrown in.  The figure stands just over 7 inches tall and he has 35 points of articulation.  It’s the standard McFarlane set-up, which is to say it has its plusses and minuses.  It generally doesn’t break up the sculpt too awkwardly, which is a plus.  The sculpt is generally not a bad one, especially given the source.  The proportions aren’t too odd, and the detailing is mostly just what’s supposed to be there, without a ton of extra detailing that’s not needed.  I like a streamlined Nightwing, so I like this a lot more than the prior sculpts.  The head’s not bad, but it’s definitely a bit more on the cartoony side.  There’s a heck of a chin on this guy, and he’s got wonky different sized eyes.  Also, I’m not entirely sure what’s supposed to be going on with his hair.  It looks fine from certain angles but awkward from others.  Nightwing’s paint is pretty clean.  The blue is bold and eye-catching, which I like.  I don’t like that the shoulder assembly once again breaks up the blue line-work, but Todd’s not letting that particular gimmick go.  Nightwing is packed with a display stand and a card.  It’s kind of crazy that he gets no eskrima sticks, nor hands to hold them, especially with them being on the art for the included card, but that’s McFarlane.

THE ME REMAINDER OF THE EQUATION

I saw this guy’s initial photos and thought “he doesn’t look so bad.”  It wasn’t enough for me to track him down, mind you, but when one got traded in at All Time, it certainly made me contemplate buying him.  I was gonna wait it out and see where I fell, but my co-worker Mike decided to make it easier on me, and just bought it for me as a Christmas gift.  That certainly took a lot of the thought out of it.  It’s honestly not a bad figure.  I mean, not great, but I didn’t expect that.  But, within the confines of the set-up, he’s okay.

#3525: Donatello – Heroic Turtle-At-Arms

DONATELLO — HEROIC TURTLE-AT-ARMS

TURTLES OF GRAYSKULL (MATTEL)

Fun FiQ Fact #0004: The vintage Masters of the Universe and Teenage Mutant Ninja Turtles toylines shared a designer, Mark Taylor, who designed key portions of both lines.

I’m neither the world’s biggest Masters of the Universe fan nor the biggest TMNT fan, so you may be wondering what’s the deal with me reviewing a crossover figure from the two lines. Okay, you’re probably not, because I’m actually pretty transparent on some things, and one of them is that I like Donatello action figures. Where there are cool new Donnies, I tend to follow. Also, I do like me a nifty crossover. So, behold Man-At-Arms Donatello!

THE FIGURE ITSELF

Donatello is part of the first standard assortment of Mattel’s Turtles of Grayskull line, alongside Leo, Man-At-Arms, and Mutated He-Man. The figure stands about 4 1/2 inches tall and he has 24 points of articulation. In terms of construction, these figures are very similar to Mattel’s own Origins line, which makes a degree of sense, since it allows the Turtles to fit right in with the established MotU characters, as showcased in the included minicomic. The design brings his build more in line with the typical Masters look, so he’s a little more roided out than usual, and gets less of that typical Turtle physique. This is presumably to keep cross-compatibility between all of the figures in the line. Donnie gets his own Man-At-Arms inspired armor, which is pretty fun. I especially dig how the back shell can turn into a separate shield piece. Donnie’s color work keeps with his usual palette, but there’s clearly more purple, since that’s the main basis for the armor. I like it; it makes him stand out nicely. Donnie is packed with the 7 pieces of removable armor, plus a staff-version of the Man-At-Arms mace, and a minicomic explaining the background of the crossover. Of particular note, it features Roboto in his minicomic colors, which makes me very happy.

THE ME REMAINDER OF THE EQUATION

This whole endeavor is Max’s fault. He let me know about this crossover’s existence, and he made darn sure I got one of these, with this particular one landing in my hands just days before Christmas. He really likes to look out for me. I don’t feel the need to go in-depth for this line (but I certainly wouldn’t say no to a Roboto/Metalhead crossover), but this one figure is definitely worth it.

#3524: Shazam!

SHAZAM!

SUPER POWERS (KENNER)

Fun FiQ Fact #0003:  The character that would eventually become Shazam was originally intended to be called “Captain Thunder” and “Captain Marvelous” before Fawcett Comics landed on “Captain Marvel.”

Kenner’s Super Powers has a very hard link to Christmas for me.  As a kid, for a good stretch of time, I got one every Christmas, and, in recent years, it’s a trend that’s returned.  I’m actually very close to the end of the line, which also means that I’ve gotten to the point where all of the ones I need are nearer the more expensive side of things, and also all hail from the line’s last year.  That includes today’s focus, a Captain Marvel named Shazam!

THE FIGURE ITSELF

Shazam was released in 1986, as part of the third and final year of Kenner’s Super Powers line.  While the character wouldn’t actually take on the name “Shazam” in-universe until 2011, since by 1986, the Captain Marvel trademark was firmly in Marvel Comics’ possession, so whether he used the name in the books or not, no toys could use it.  Rather amusingly, Marvel themselves didn’t really do much with it either, with their first figure based on any of *their* Captain Marvels not seeing a release until the late ’90s.  But, I’m getting side-tracked.  The figure stands about 4 1/2 inches tall and he has the line’s standard 7 points of articulation.  Shazam sported a unique sculpt, based specifically on his later DC design, which moved him more into the traditional spandex set-up.  His sculpt is a little stiffer than the others, which is especially notable in the straightness on the arms.  His head seems a bit soft compared to others in the line.  They’re clearly trying to capture the character’s more unique facial features, while keeping him in-line with the house style of the rest of the figures.  The end result is sort of middling.  Definitely not the strongest the line had to offer.  His cape was cloth.  On my figure, it’s a repro; the original had a unique plastic clasp piece, as well as some rather nice printed details.  Shazam’s paint work is minimal, but it’s decent enough.  There’s a little wear on mine, but nothing crazy.  Shazam gets no accessories, but he gets the usual action feature.  In his case it’s a “Power Action Thunder Punch;”  squeezing the legs makes the arms swing in opposite directions.

THE ME REMAINDER OF THE EQUATION

As has been the trend on the last few of these, Shazam was my main Christmas gift from my parents this year.  While Mister Miracle was one of the line’s finest, and a great send-off from the final year, Shazam is definitely more middle of the road.  He’s okay, and I’m sure glad to finally have him, but he himself isn’t much to write home about.  And now I’ve got four left.  This is getting very exciting!

#3523: Donatello – Battle Ready

DONATELLO — BATTLE READY

TEENAGE MUTANT NINJA TURTLES BST AXN (THE LOYAL SUBJECTS)

Fun FiQ Fact #0002:  Donatello was the favorite Turtle of TMNT co-creator Peter Laird, who modeled Donnie’s personality most closely on his own.

When I got into TMNT as a kid, alongside my brother Christian, we each had our clear favorite member of the team.  Mine was Raphael!  What’s that?  You assumed it was Donatello?  Why, just because I’ve spent ten years here on the site saying that or something?  Well, I was initially a Raphael kid, believe it or not.  Christian, on the other hand, was a Donatello fan.  By the time of the 2007 TMNT movie, however, I realized it wasn’t Raph that really spoke to me, and I’ve been a Donnie fan all the way since then (for his part, Christian settled in on Michelangelo, again a much more natural fit for his personality).  Since I’ve latched to Donnie, though, he’s become an easy target for gift-giving and the like, especially when there’s new versions that I don’t yet own.  Like, say, for instance, this guy!

THE FIGURE ITSELF

Donatello — Battle Ready Edition is part of The Loyal Subjects’ Teenage Mutant Ninja Turtles BST AXN line.  He’s based on their takes on the team’s IDW comics-based appearances.  There are two releases for each of them, with the “Battle Ready Edition” being an SDCC 2023-exclusive, which was also available on The Loyal Subjects webstore.  The figure stands about 5 1/2 inches tall and he has 29 points of articulation.  While a good number of the BST AXN Turtles are prone to sharing parts between releases, the more unique nature of the IDW designs means that this Donatello gets an all-new sculpt.  The IDW illustrations are a little more flowy and free-form with the designs, ultimately making the Turtles a little more human in appearance than they usually are.  The sculpt does a respectable job of capturing his look.  He’s tall and lanky, and gets all the proper texturing you’d expect from this particular design.  I especially dig that they even remembered to give him his artificial shell that he got later in the book’s run.  That’s a very fun touch.  Donnie gets two different head sculpts, one slightly goofy and grinny, and the other one is serious and teeth-baring.  They’re both decent matches for the source, but I do lean more towards the goofier one.  Donnie’s paint work is one of this particular release’s main selling points.  In addition to the base level work, the “Battle Ready” figures all get an extra wash to help to accent the smaller sculpted texture details.  It actually works really well, and it’s surprisingly consistent between the different parts of the figure.  Also worth noting is that the two heads get two different styles of eyes, with pupils on the goofier one, and no pupils for the more serious one.  Given the usual back and forth on the styling, it’s nice to get the option there.  Donatello is packed with three sets of hands (gripping, open gesture, and a pointer grip/fist combo), his bo staff, a pair of goggles, and his anti-gravity gauntlet.

THE ME REMAINDER OF THE EQUATION

I’ve not really messed with the BST AXN Turtles, but there’s just been more and more, and I guess it was inevitable.  The inevitability came to a head when Max got one of the fancy SDCC ones for me as the first part of last year’s Christmas gift.  It’s a different style of Donnie, and it’s a slightly different style of figure, but both elements work nicely.  I definitely dig it.

#3522: Nightwing

NIGHTWING

BATMAN: HUSH MAFEX (MEDICOM TOY)

Welcome back guys!  I’m…well, refreshed isn’t the right word to use for my post-Christmas break state, since I pretty much just spent the week dealing with the flu, but…it’s a week later?  Yep, that’s it.  First things first: I’ve got a bit of updating to be done.  I’ll be honest with you all, after ten years of doing the site, it’s become routine, and out of routine can come monotony.  And monotony doesn’t make for exciting writing or exciting reading.  And, if I’m not having fun here, then I ask you, what’s the damn point?  I might as well pack the whole thing up.  But I don’t wanna do that, so I’m going to tweak my formula a bit.  Namely, since I know from at least some portion of my readership, that the “Me Half of the Equation” is the bit they read first before going back to the rest if they think it’s worth it, and it’s also my favorite part to write, I’m moving it to the top.  Well, some of it, at least.  Overall assessment of the figure and post-review wrap-up will still be at the end, but the more interesting interludes are now starting things off.  Additionally, I’m going to try to give my reviews a little bit of a peppy-fun-type fact of the day, be it tied to the item’s history, or to my own, because I think that sounds fun.  And, because this is my site, I totally reserve the right to reverse the whole thing and go back to the old style.  We’ll see.  Awaaaaaaay we gooooo!

Fun FiQ Fact #0001:  Dick Grayson is not DC’s first character to use the name Nightwing; in the Silver Age, Superman used the identity while fighting crime in the Bottle City of Kandor, and eventually passed it on to his cousin Van-Zee.

A good portion of my modern DC collecting is owed to early ’00s DC Direct, and one of the most formative lines for me was Batman: Hush, based on Jeph Loeb and Jim Lee’s run on Batman.  In particular, it was the line’s second series, which featured Nightwing, which got me downright addicted.  I had the release date memorized, and I’d check DCD’s shipping schedules every week for it.  I’d ask about it at Cosmic Comix.  I had pictures saved on my desktop.  The figures haunted my dreams.  And Nightwing stood above them all.  So, when they finally *did* show up, and he was the one that was already gone when I got there, it only made the obsession worse.  Thankfully, it wasn’t a long wait for a restock, and I did get one, which I loved to pieces.  No, seriously, to pieces, because it was a ’00s DCD figure and they had the durability of wet toilet paper.  I’ve still got him, but he’s more glue than plastic at this point, I think.  Still, I do love that Jim Lee Nightwing.  And then MAFEX comes along, with they’re updates to the Hush figures, and Nightwing’s there, and there’s *literally* no way I’m missing that one, right?  Not on your life.  It was another long wait, and one that made me very much remember the wait for the original, but that’s honestly pretty appropriate, right?

THE FIGURE ITSELF

Nightwing is figure 175 in Medicom’s MAFEX line-up, and is the most current of the line’s Hush tie-in figures, though Ivy is close behind. The figure stands right at about 6 inches tall and he has 43 points of articulation. The movement here is very similar to that of Hush, albeit less restricted, since Dick doesn’t have the trench coat to worry about. It’s a very handy articulation set-up for a guy who’s a trained acrobat, so that’s a very definite plus. Nightwing sports a sculpt based on Jim Lee’s illustrations of the character from the book. Lee’s take on the design isn’t drastically different from the design that came before it, but he ditches the padding on the forearms and shins, resulting in a far more streamlined look, and one that’s, quite frankly, Nightwing’s best.  As with the other two MAFEXes I’ve looked at, the Jim Lee stylings are captured very nicely here, and in general, he makes for a very clean transition to toy form. Like the others, Nightwing gets two different heads, one calmer, and one gritting his teeth. They’re both very nice, very sharp sculpts, which really look the part. Nightwing’s color work is pretty much what it needs to be. It’s basic, but clean. The blue is appropriately bright and eye-catching, and they’ve even remembered to make the mask on both heads blue, fixing the error we saw on the Icons figure. Nightwing is packed with six pairs of hands (in fists, gripping, flat, open gesture, relaxed, and stick twirling), two standard eskrima sticks, one pair of sticks with a posable wire running between them, an alternate back piece with stick storage, and a display stand. I love all the options for the sticks, though I did have some difficulty getting the spinning ones to stay on their matching hands.

THE ME REMAINDER OF THE EQUATION

My very long wait for this guy was brought to an end courtesy of All Time Toys owner Jason, who gave me this one as a Christmas present (well, this was my more store related gift; I also got a spot cleaner for carpets, which excites me because I’m apparently an old person now). I very much enjoy him. I’ve got a lot of Nightwings, but this one is the best.