Tag Archives: 90s

#3576: Spider-Man

Posted by Ethan Wilson in Reviews and tagged with , , , ,

SPIDER-MAN — MULTI-JOINTED ACTION POSES

MARVEL SUPER HEROES (TOY BIZ)

Fun FiQ Fact #0055: Prior to Toy Biz taking the license, no Spider-Man figure had ever been more posable than the rest of his corresponding toy line.

As I was a child when I started collecting action figures (what can I say, I had no choice in this matter), a lot of my earliest entries in my collection were gifts from family members and the like.  My grandparents had a real tendency to bolster the ranks of the collection, and introduce me to characters I didn’t already have.  Since others were buying the figures for me, I didn’t always have a say in *which* version started things.  So, there are some cases where I perhaps *wanted* one version, but got another instead.  But I’m in charge of it all now, and there’s no one to stop me from going back to get the ones I wanted…so that I can discover that the one already had was honestly just as good.  I’m getting ahead of myself.  Anyway, here’s a Spider-Man.

THE FIGURE ITSELF

Spider-Man was released in the third series of Toy Biz’s Marvel Super Heroes line in 1992.  There were two Spider-Men in the assortment, and this one was the “Multi-Jointed Action Poses” version, which is to say he was extra posable.  The same figure was re-released in Series 5 of the line, two years later.  The figure stands about 5 inches tall and he has 15 points of articulation.  Up to this point in the line, all of the Spider-Men had used a body that was similar in construction to the rest of the line.  It was bulkier and more pre-posed, and looked more like Toy Biz’s Super Powers-inspired DC figures.  This time around, Spidey is far skinnier, and in fact has a much greater level of articulation.  While the mobility isn’t quite to the heights of later Marvel offerings, it was by far the best this specific line had to offer, and would remain some of the best to come out of Toy Biz’s 5-inch line.  The sculpt is still somewhat dated by modern standards, but showed a real jump forward in terms of how Toy Biz handled things.  There aren’t any major details or anything to worry about, but the proportions were generally much more balanced than others, and he certainly looked the part for the character.  Since the sculpting is on the lighter side, the paint does the heavier lifting here.  It does well enough.  The weblines aren’t terrible, though there are some slight inconsistencies in exact placement on some of the extremities.  This design opts for a smaller eyed version of the mask, which is unique, and also kind of fun.  The biggest issue I have with the coloring on the figure is the near universal issue of the figure’s upper legs discoloring over time.  This figure was packed with no accessories, with the extra posablity being his main selling point.

THE ME REMAINDER OF THE EQUATION

When I was a kid, my cousin Rusty got Spider-Man before me, and this was the one he got.  I wanted one too, but when our Nana went back to get me one, the closest match was the later Spider-Man Animated super-posable figure.  He was fine, but I always kinda wanted this one.  I had the chance to snag one loose from a collection that came into All Time a couple of years ago.  Ultimately, he’s fun, and a cool sign of Toy Biz’s progression with the brand.  I can’t really say it’s *better* than the Animated one, though, so I spent a lot of time chasing an equivalent, if perhaps not a little worse, figure.  It makes you think, I guess.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3571: Silver Surfer

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SILVER SURFER

MARVEL SUPER HEROES (TOY BIZ)

Fun FiQ Fact #0050:  Though first introduced all the way back in 1966, the Silver Surfer wouldn’t join the world of action figures until 1990, with the very figure I’m looking at today!

I have a lot of gaps in my knowledge of how *exactly* I encountered a number of classic Marvel characters for the first time, and Silver Surfer is part of that.  I feel like something to do with the FF would be how I knew him, but I don’t recall seeing any of his appearances on the ’90s cartoon until after the fact, which means that, like last week’s Daredevil, I’m leaning more on comics appearances, I guess?  Exactly which ones, I don’t know, but there certainly had to be something.  I mean, obviously, there were figures, too, right?  Right.

THE FIGURE ITSELF

Silver Surfer was released in the first series of Toy Biz’s Marvel Super Heroes line in 1990.  The figure stands 5 inches tall and he has 7 points of articulation.  He’s rather typical of the earliest figures in the line, in terms of articulation and design.  There’s a slightly tweaked version of this figure from Series 3, which I looked at a few years back.  That one was vac-metalized, a process that also removed the neck joint from the figure.  The vac-metalizing removed a ton of the sculpt’s sharpness (and it’s not an exceptionally sharp sculpt in the first place), so this one does wind up looking a little bit better.  He’s still a little odd looking on the proportions front, and I don’t care for the face, but it’s not *awful*.  In contrast to the chromed finish of the Series 3 release, this one gets a flat silver finish.  It’s not as immediately stunning, but it works fine.  He also gets paint for the eyes on this one, which is a minor change-up, but enough to be somewhat notable.  Surfer is packed with his board, which for this release is really thick and bulky, and also more of a skateboard than a surfboard.

THE ME REMAINDER OF THE EQUATION

My first Silver Surfer was actually the 10-inch release, followed closely by the CD-Rom pack-in 5-inch figure.  The Super Heroes ones wouldn’t cross my radar for quite some time.  I got the chrome version back in 2016, when I snagged a bunch of loose Toy Biz figures at a con.  It wasn’t until a few years ago that I was able to track down the standard version, when one came into All Time.  I expected to like the chrome one more, but honestly, the sculpt works better this way.  He’s nothing to write home about, but he’s okay in context of the rest of the line.

#3567: Daredevil

Posted by Ethan Wilson in Reviews and tagged with , , , ,

DAREDEVIL

MARVEL SUPER HEROES (TOY BIZ)

Fun FiQ Fact #0046: Daredevil’s first action figure was in Mattel’s Secret Wars line, despite the character’s absence from the comic event the series was tying into.

I can’t tell you exactly where my love of Daredevil came from. It had to be comics related, because his cartoon presence in the ’90s was pretty scarce and I don’t recall seeing any of his appearances in first run. I certainly recall one of his early team-ups with Spider-Man from the first essential collection, and I think I had a small stash of Daredevil back issues. Whatever the case, I was invested from a pretty early age. Obviously, my first figure was from ToyBiz, but, curiously, it was neither of the two figures I’m looking at today. Weird, right?

THE FIGURE ITSELF

Daredevil was released in the first series of Toy Biz’s Marvel Super Heroes in 1990. He then received a repainted release in 1994’s Series 5. The figure stands just under 5 inches tall and he has 7 points of articulation. At this point, Toy Biz was very much working through the left over stylings of their DC line, which had aped a lot of Kenner’s Super Powers, albeit in a more rudimentary fashion. The sculpts on the first Marvel Super Heroes have a lot in common with Toy Biz’s in-house sculpts from the second series of their DC line. They’re up-scaled about half an inch, but they keep the articulation scheme and ever so slight preposing. DD’s sculpt was technically unique, but it was also very similar to other Series 1 figures, just with some DD-specific elements added. The head’s the main selling point, of course. It’s a little on the soft side, and the horns in particular are rather nubby. But, given the era, it’s not terrible. The body features sculpted elements for his belt, holster, gloves, and boots, which is more than a lot of DD sculpts have offered. The Series 1 release is in his classic all red, which is largely just molded plastic, with minor paint work for his face and logo. The Series 5 release upgrades him to his then-current armored look, which changes up his paint tremendously. It also means that the paint doesn’t remotely line up with the sculpted costume elements, but, honestly, given the softness of the sculpted details, it’s not the end of the world. The plant is particularly fuzzy on the second release, and it doesn’t hold up particularly well to wear on either one. Both releases included an “exploding grapple hook”, which is a missile launcher. It’s black on the Series 1 release and silver on the Series 5.

THE ME REMAINDER OF THE EQUATION

My original Daredevil figure was from the Spider-Man Animated line, but the repaint of this guy came pretty quickly after. I recall that it was featured in a story in a Spider-Man magazine I had growing up, and this guy was at Cosmic Comix, so my dad bought him for me. His sculpted details jumped out as wrong, and that’s when I learned about the magical world of repaints! I only added the original release to my collection a few years ago, when one got traded into All Time. They’re both definitely dated, but I still dig them.

#3541: Mr Sinister

Posted by Ethan Wilson in Reviews and tagged with , , , ,

MR SINISTER

X-MEN (TOY BIZ)

Fun FiQ Fact #0020:  Toy Biz’s original Mr Sinister mold had three different color variations, as they desperately attempted to keep up with the character’s comic design changes.

Remember when I was talking about how I screwed up on my ID-ing of the Mr Sinister figures from Toy Biz?  It was a week ago, so it shouldn’t be too distant in your memories.  Well, there’s the three color variants, and I’ve looked at the original, and the late run repaint, but there’s one more, right in the middle, and I haven’t looked at him.  I don’t like the dangling anticipation, so check it out!  The last one!  Now with beard!

THE FIGURE ITSELF

Mr Sinister was released in the 1993 repaint series of Toy Biz’s X-Men line.  Last week’s Sinister was the way the repaint was shown off on the card back, but was actually released later, while this figure wasn’t pictured at all, yet was still the figure that shipped with the rest of the repaint series.  Like the other two Sinister figures, this one is 5 inches tall and he has 8 points of articulation.  It’s exactly the same sculpt as before.  He’s still stiff, but he still works for the character.  The color differences between this guy and the very first release are exceedingly minimal.  In fact, the two are identical apart from the outlined lips and the presence of the beard.  That’s it.  That’s the whole change-up.  Not even a minor palette swap.  I mean, I guess it could be worse?  It was enough to get me to buy it, so somebody won.  I don’t know who.  I mean, Toy Biz went out of business years ago, and I bought all of my Sinisters second hand, so not them.  Was it me?  Did I win?

THE ME REMAINDER OF THE EQUATION

It’s crazy that I didn’t have this guy on hand to do both repaints in one review last week, right?  Like, what are the odds that I’d find this repaint right after reviewing the other one?  Well, pretty low, because this one has been sitting in the backroom at All Time Toys since I got the other one.  They came in at the same time, and I got so distracted by the more obvious repaint, that I missed that I didn’t have this one.  Look, I try, you guys, but the Sinisters just confuse me.  They’re my Toy Biz blindspot!  Well, now I have all three, so no one can stop me now!

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3536: Mr Sinister

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

MR SINISTER

X-MEN (TOY BIZ)

Fun FiQ Fact #0015: Creator Chris Claremont intended for Mr Sinister to be dark take on the “Shazam” concept, revealed to be the projection of Nate, a fellow orphan from Scott’s childhood.

Every so often here, my solid knowledge of toy-related things fails me. Okay, maybe not fails, but lapses. And then I say something definitively, and it’s totally not definitive because it’s actually wrong. Me? Wrong? Believe it or not, it happens. What’s even crazier is that in this instance, it’s about Toy Biz Marvel, which is especially in my wheelhouse. In my review of Mr. Sinister, I referred to him as the repaint, noting that the only difference between the two releases was that the “repaint” lacked the goatee of the original. Turns out I was lying like some kind of lying person. The one I reviewed was in fact the original release. This one? Repaint. Maybe not *the* repaint, but certainly *a* repaint.

THE FIGURE ITSELF

Mr Sinister was released in the 1993 Repaint Series of Toy Biz’s X-Men line…maybe. Here’s the thing about this guy: he’s got a somewhat confusing history. The prototype shots for the repaint series showed the figure seen here, but when the assortment hit retail, the Sinister that showed up was the same as the standard, but with his goatee added. About three years later, the figure that matched the prototype randomly started showing up mixed in with KB Toys’ close out stock of earlier assessments. Did they just, like, forget to pack the new one in and send him out later? Who knows? Certainly not me. I just review figures and get things wrong. The figure stands 5 inches tall and has 8 points of articulation. He’s using the same sculpt as the initial release, which, apart from its stiffness, is a pretty good sculpt.  The main change-up to the figure is the cape, which is now a totally red piece.  Beyond that, it’s minor changes, with the neckline becoming a v-neck, and the blue taking on more of an indigo hue than its original release.  His forehead diamond is also a little larger, and, on mine, there’s a red spot on his chin, which looks a little bit like his smaller soul patch look, even if it’s not supposed to.

THE ME HALF OF THE EQUATION

Keeping track of all of the Sinister variations is definitely a bit tricky.  I got the first one, and since then I’ve been trying to get the other two variants, because I’m weird like that.  I was honestly not even expecting to get this one when I did; a collection came into All Time, and I just assumed the Sinister would be the one I already had, since it’s the most common by far.  But it wasn’t and now I’ve got 2 out of 3!  Noice!

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3531: Jean Grey

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

JEAN GREY

X-MEN CLASSICS (TOY BIZ)

Fun FiQ Fact #0010: Jean Grey’s Jim Lee costume has received 11 action figures since its debut.

As a kid, my introduction to the X-Men was the animated series, which drove my desire for the whole cast of characters in action figure form.  The toyline running concurrently with the show was actually comics-based, but still generally managed to get a lot of looks that were close enough to work.  There were, however, some omissions, as well as some…odd ways of doing figures.  Despite being a main character on the show, Jean’s only figure in the line proper for most of its run was a single Phoenix figure, which wasn’t her main get-up on the series.  That look got some action figure love, sure, but Toy Biz’s takes always felt a bit monkey’s paw-like; you’d get her, but at some sort of trade off.  My search for a good one ran for a good number of years.  The closest I got was in 2000, and it was a figure that I was honestly pretty thrilled to get, even though she’s maybe not the most thrilling figure at the end of it all.  Still, here she is!

THE FIGURE ITSELF

Jean Grey is part of Toy Biz’s X-Men Classics line, which they launched in 2000 to run some old molds in new packaging between the toys for X-Men: The Movie and X-Men: Evolution.  While most of the figures were minor tweaks to existing releases, the Battle Blasters figures all got more substantial tweaks, in order to make them less Age of Apocalypse-inspired and more standard.  The figure stands 5 inches tall and has 5 points of articulation.  Her mold is almost identical to the original “Secret Weapon Force” release, which was just the Jean mold that Toy Biz had on hand at the time, I guess.  It does at the very least fill in the etched lines for the boots and gloves from the mold’s original use as Mystique.  For all of the re-uses the body saw during Toy Biz’s run, I do believe this is the only time they got rid of those.  It definitely helps with the overall look.  The mold’s not bad; the body is basic, and the head, while definitely more dialed into the AoA version of the character, isn’t horrible.  The main change-up, obviously, is the paint, which now puts her in her Jim Lee costume…or at least something close to it.  There are some sculpted details that don’t line up; the hair’s too short, and she lacks the shoulder pads and leg pouches.  That’s kind of expected, and it’s certainly closer than the other repaint they did for this costume.  The only thing that really stands out to me as “off” is the hands being yellow, but even that was a back and forth thing, with it only more recently being decided that she didn’t wear gloves with the costume.  This Jean release got the exact same accessory as her original “Secret Weapon” release: the Catapult Tank Blaster.  It’s a big green and black thing, and it’s hella goofy.  But, hey, at least I got two of them, right?

THE ME REMAINDER OF THE EQUATION

I vividly recall finding this figure in a Toys R Us, early December, still in post-X-Men: The Movie bliss, and being absolutely thrilled.  Then less so, because it was early December, which was typically a time of no toy purchases, what with the inevitable onslaught of figures I’d be getting as Christmas gifts.  My parents, however, recognized the significance of the figure, and allowed me to break their usual rule, so that I could finally have the Jean Grey I’d been waiting so long for.  She’s not much to write home about; she’s just the Secret Weapon Force Jean with a new deco, and that one wasn’t anything special either.  But, I was always very happy with her, and she’s still pretty nifty, even if there are better Jim Lee style Jeans these days.

#3510: Ultraman – Defender of the Universe

Posted by Ethan Wilson in Reviews and tagged with , , , ,

ULTRAMAN — DEFENDER OF THE UNIVERSE w/ JACK SHINDO

ULTRAMAN (DREAMWORKS)

“An evil space virus, Gudis has invaded Earth, producing horrifying giant mutant monsters which threaten to wipe out all life on the planet.

All might be lost if not for ULTRAMAN….Defender of the Universe. Towering 20 stories high, only Ultraman can save the world from the Alien Intruders.

However, earth’s polluted atmosphere is deadly to Ultraman, so to fight on this planet, he must share the molecular structure of a human – Jack Shindo.

Jack is a member of UMA. an international fighting force whose mission is to protect the world from hostile aliens.  But when the battle seems hopeless for UMA. Jack uses his secret Delta Plasma Pendant to transform into Ultraman.

Can Ultraman save the earth against the alien intruders? He must, for he is our only hope.”

Ultraman is a Japanese property, and has almost always been produced in Japan, but there have been a few periods during the franchise’s history where outside groups try to throw their hat in the ring.  In 1990, the South Australian Film Corporation partnered with Tsuburaya Productions to produce Ultraman: Towards the Future, a 13-episode English Ultra series.  Keeping with the series’ move away from usual Ultra production channels, the accompanying toys came not from Bandai, but instead from DreamWorks, who put out a line featuring the main Ultra, Ultraman Great, and the monsters he fought. I’m taking a look at Ultraman today!

THE FIGURE ITSELF

Ultraman — Defender of the Universe was released as part of DreamWorks’ 1990 Ultraman toyline. Despite the show getting a subtitle to differentiate it from the others, the line got nothing of the sort, nor did the main character get his full name.  So, it’s all just Ultraman.  The Ultraman figure stands about 8 inches tall and has 6 points of articulation.  He’s not exactly very mobile, since his construction is largely rotocast, and that limits what can be done with articulation.  He gets very basic movement, but is largely stuck in the pose he’s been sculpted into.  This Ultraman was based on Great’s design from the show, which was itself pretty close to the original Hayata design.  In the show, Great had a spandex suit, a notable shift from the usual rubber suits of the Ultras, but for the figure, his proportions and more sculpted musculature makes him look like he’s back in the same rubber suit as the others.  His proportions are a bit more cartoony, almost in line with the likes of vintage Masters of the Universe.  It’s definitely a departure from the usual Ultra stuff, but it’s certainly got its own vibe.  The paint work isn’t terrible; he’s definitely on the fuzzy side for all of the edges for the silver, but that’s kind of expected for the rotocast set-up.  All of the key details are there, though, and coverage is pretty even.  Though Great has no accessories of his own, he does include his human counterpart, Jack Shindo.  Jack stands about 2 1/2 inches tall and has 5 points of articulation.  He’s technically *far* too tall for proper scaling with Great or any of the accompanying monsters, but he’s at least enough smaller to sell the idea.  Any smaller and he’d pretty much just be a Micro Machine.  His sculpting is pretty basic, but honestly not so bad for the scale.  He’s got paint on the head and hands, with the rest being molded color.  My figure is the blue suited version, but there’s also a red one.  Jack also got his own accessory, a small gun to hold.

THE ME HALF OF THE EQUATION

In my early days of Ultraman collecting, I recall seeing this guy a few times, always loose, and I kind of wondered what his deal was, but I never actually got one.  Later, I found out what his deal was, but I still didn’t get one, because…well, I’m actually not entirely sure on that one.  This one was quite literally thrown at me, so it’s hard to miss that, right?  Yes, he was traded into All Time as part of a rather sizeable collection and owner Jason “handed” this one over to me because he knows I like Ultraman.  I do like Ultraman, so he’s onto something there.  He’s goofy, but I do really dig him, and it’s cool to get Jack, since alter egos are a rarity for Ultra tie-in lines.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3505: “Charger” Mark McCutchen with Unlimited Series Car

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

“CHARGER” MARK McCUTCHEN with UNLIMITED SERIES CAR

NASCAR RACERS (HASBRO)

“Welcome NASCAR fans to the Unlimited series races! Prepare to be floored by the new state of the art cars and challenging new courses. Can Team Fastex hold on for the win to beat out rival team Rexcor for the season championship?”

Do you ever have one of those memories, like one of those very intense memories of something, only to have, like, no one else even acknowledge that said thing even existed?  I mean, probably.  It happens to us all, right?  Well, one of those for me is NASCAR Racers.  Launched in 1999, it has very little to do with actual NASCAR, and was instead a cartoon about futuristic car racing.  Honestly, it’s more an update to Speed Racer than an adaptation of anything real world.  The show ran for two seasons, and managed to spawn a small line of toys from Hasbro.  And then the show ended and the toys disappeared, and everybody stopped talking about it.  Well, I’m gonna talk about it now, and nobody can stop me!  So, let’s look at “Charger” Mark McCutchen and his Unlimited Series Car!

THE FIGURE ITSELF

“Charger” Mark McCutchen and his Unlimited Series Car were part of the standard component to Hasbro’s NASCAR Racers line.  Charger being the most prominent of the show’s racers got the most toy coverage, with two standard releases (this one and an ice-themed variant), plus a deluxe electronic release.  This one was based on his standard racing set-up from the show’s two seasons.  The main Charger figure stands 2 1/2 inches tall and he has 4 points of articulation (the legs move as one, rather than independently).  He’s a rather basic piece, not really designed to do much on his own, but he’s not bad for what you’re getting.  He’s fairly recognizable as Charger as seen in the show, and he’s even got a removable helmet, bound to get lost, right?  His color work isn’t quite a match for his show design; his clean yellow accenting from the show is changed to more of a lightning pattern here.  It still reads more or less the same, but it’s definitely different.

Though Charger’s name was the main focus on the packaging, the majority of the box was taken up by his car.  It’s a fully detailed racing car, which is honestly pretty cool.  There’s four moving wheels (something you should never take for granted), and the canopy flips up so that you can place Charger in the driver’s seat, which doubles as a fully removable “Rescue Racer,” like the cars had in the show.  The car also featured a shooting missile on the front, as well as Sonic Thrusters that pop out of the sides.  Or, at least they should, but they’re stuck on mine and I don’t want to force them.  There’s a lot of fun lille gimmicks at play with this one.  There’s also a lot of really fun detailing on the car, especially in terms of its coloring.  While the patterns on the figure were a little off, the car is pretty much spot-on to the show’s models.  The proper details are largely done via decals, which add a lot of really fun elements to the mix.  I particularly enjoy seeing his sponsors, all of which are Hasbro brands from the time.

THE ME HALF OF THE EQUATION

My first encounter with NASCAR Racers was one of frustration, because its pilot movie pre-empted Avengers: United They Stand.  That was my favorite show, and I would except no substitutes.  But, when it *wasn’t* pre-empting Avengers, I got to actually liking the show on its own, and I was pretty well hooked by the end of the first season.  I didn’t have standard Charger as a kid, instead getting the deluxe Future Car release, alongside “The Collector” and his car.  I’ve since lost, like, everything to those two.  Since the original run, I haven’t been able to find any other toys from the show.  That is, until I stopped at Factory Antiques (THE LARGEST ANTIQUE MALL IN THE U.S.!!!…according to their brochure) to break up a long drive, and they had all standard Team Fastex racers.  Given the pricing on these things these days, a whole set wasn’t something I could swing, but with some encouragement from my very lovely wife, I decided to at least get Charger.  He’s just as fun as I remember these things being back in the day, which makes me very happy.  Maybe someday I’ll get the chance to own the rest, but until then, Charger suits me just fine.

#3501: Blackbird Jet – Mobile Air Command

Posted by Ethan Wilson in Reviews and tagged with , , ,

BLACKBIRD JET — MOBILE AIR COMMAND

X-MEN (TOY BIZ)

“The Blackbird Jet is a hypersonic transportation vehicle for X-Men. The jet is equipped to fly long-duration, high-altitude reconnaissance as well as attack missions. With a myriad of weapon delivery systems and electronic counter-measures, the Blackbird is markedly superior to any adversary.”

To close out this month’s look into the non-figure components of Toy Biz’s X-Men line, I’m looking at what is quite probably the centerpiece of those non-figure components: the Blackbird.  First introduced when the team returned with its all-new, all-different line-up in 1975, its become a fixture of the franchise, with multiple iterations in the comics, and some sort of presence in every notable media adaptation of the team.  It’s use as a major set-piece in the ’90s cartoon also netted it a release in the accompanying line of toys, which is what I’m taking a look at today.

THE VEHICLE ITSELF

The Blackbird Jet was added to Toy Biz’s X-Men line in 1995, alongside Series 4 and 5 of the main line.  While most components of the line were comics-based items that happened to have the same general looks as the cartoon incarnations, the Blackbird goes for a more directly cartoon-based look, albeit adapted a little bit to the constraints of the line’s scale and price-point.  The vehicle measures 15 1/2 inches long and has a 12 1/2 inch wing span.  The Blackbird’s sculpt was a unique one, and a pretty good one at that.  It very much takes the show design to heart, and translates it into a pretty good three-dimensional recreation.  It’s a bit scaled down from where it should be for a 5-inch line, since it would need to be able to fit the whole team, at least two side-by-side.  Instead, the cockpit is a one-seater, and the rest is scaled to match.  Like the rest of this line’s vehicles, its set-up to work with the pre-size-creep figures, so you’re not able to fit later figures into it.  But, it works well with the figures it was designed to be contemporary with.  It its default set-up, the Blackbird looks like the exterior of the one from the show.  The cockpit raises, so you can get a pilot in place, and the mid section also flips open for a passenger.  There’s also missiles to be launched from the back as well.  However, as the box so proudly proclaims, the Blackbird also transforms into three “Action Stages.”  The cockpit separates to become the “Command Center Explorer,” the tail and wings become a glider with ejector seat, and the fuselage slides out into a full-on command center, with a whole view screen set-up on the interior of the top half, which swings up out of the way.  The internal details are largely handled via decals, which include some pretty fun little touches.  The internal decals on my copy have certainly seen some better days, but it’s still very cool.  Aside from the decals (which also add a pair of X-logos to the wings, for some extra X-branding not present in the source material), everything else is molded in proper color.  The metallic blue works very well, and I’ve always dug the translucent red for the canopy. In terms of extras, the original release of this vehicle only included the two missiles, but there was also a later release, which packed in an unmasked Wolverine figure.

THE ME HALF OF THE EQUATION

My original Blackbird was, I believe, an Easter gift from my parents.  I recall getting it alongside Phoenix.  It’s notably one of the last things I remember being given at my parents’ old house, before we moved to the one they currently live in.  When they were in the process of buying their current house, there were a few visits to inspect various things, which I went along for, and the Blackbird (almost always piloted by my Series 1 Cyclops, until I got Wolverine II, so that I would have a Wolverine that actually fit in the thing) came with me, so that I had something to entertain myself.  It would go on to be one of my go-to vehicles for a great many figures (rivaled only by my Power of the Force Millennium Falcon in that regard), lasting for a very long lime.  It took quite a beating over the years, and I eventually lost all by the main chunk of the fuselage and tail.  When I got back into 5-inch collecting in college, I wound up getting a replacement, which is the one seen here.  It’s such an amazingly fun piece, and I’m glad to have one, even if it’s not my original.  But, I suppose replacing the Blackbird is kind of appropriate, since the X-Men have done it a great many times.

As a sort of a post-script here, for my birthday this year, my parents helped me reclaim at least one part of my original that I didn’t expect to find again: the original blueprints!  As I’ve touched on here before, my Grandfather was something of a hoarder, and that included squirreling away tons of paperwork from everything imaginable.  Evidently, at some point I left my Blackbird’s blueprints at his house, and he’d filed them away with other papers he’d kept.  While working to clear out the house over the summer, my Dad stumbled upon them, and my Mom had them framed for me, which is pretty sweet!

#3496: Cyclops Light Force Arena

Posted by Ethan Wilson in Reviews and tagged with , , , ,

CYCLOPS LIGHT FORCE ARENA

X-MEN (TOY BIZ)

“Using the Laser Light Force that only he possesses, Cyclops trains in the Danger Room to hone his mutant ability. The Light Force Arena’s many obstacles test Cyclops’ optic blasts to the limit! Only with constant practice can Cyclops keep his skills razor-sharp enough to cope with the threat of the Evil Mutants!”

Hey, remember back last week when I looked at that X-Men playset?  Wanna see me do it again?  Well, whether you want me to or not, that’s the angle I’m going with here.  Last week gave Wolverine a place to hang, so how about doing the same for Cyclops this week?  Oh yeah!

THE PLAYSET ITSELF

The Cyclops Laser Light Arena was released in 1991 alongside Series 1 of Toy Biz’s X-Men line.  It was the second of the two small-scale Danger Room playsets that accompanied the main line’s launch, serving as a companion piece to Wolverine’s Combat Cave.  The Laser Light Arena is the same basic dimensions as the Combat Cave, being about 7 inches tall, 7 inches wide, and 4 1/2 inches deep.  It’s smaller nature doesn’t *quite* live up to the “Arena” name, but we gave the other one a pass on “Cave” so this one can get a bit of a pass too.  Like the Combat Cave, this one required assembly right out of the box.  Once popped together, you get a set-up that’s not terribly different from the Cave’s assembly; three walls and three gimmicks, plus a spot to plug in a figure.  In this case, it’s designed to work specifically with the Series 1 Cyclops, right down to having spots shaped like the soles of his boots.  There’s also a spot that’s designed to directly work with the button that triggered his light-up feature; shame my figure lacks that these days.  Depending on how the “stand” is configured when you push down the button that would go under the spot where his light-up lever *should* be, you get one of three outcomes.  Furthest counterclockwise splits open the “metal box,” the next over flips back the Magneto standee, and the last one knocks over the stone wall.  Since it’s tied into the light up feature, it all looks like it’s being done by Cyclops’ optic blasts.  They actually all work pretty well, and there’s a good feeling of interactiveness to it.  The color scheme isn’t too far removed from the Combat Cave, albeit with the predominant color being yellow in place of red.  It works fine enough.  There’s more stickers to be had, as well, to keep things a little more interesting.

THE ME HALF OF THE EQUATION

As with the Combat Cave, I missed this one’s original retail run.  I do remember seeing it in the little product catalogue, and I was slightly more interested in this one, it being Cyclops-themed and all.  I remember being slightly bummed about not getting this one at the same time as the Combat Cave.  I wound up getting this one a couple of years later, from Collector’s World, a small comic shop near where my family vacations, which has sadly gone out of business since.  I think this one’s actually a bit more fun than the Combat Cave, and it’s features work a little bit better.  But, they do both make nice display pieces.