Tag Archives: 90s

#0578: Banshee & Pyro

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

BANSHEE & PYRO

MARVEL MINIMATES

Banshee&Pyro1

In the 90s, the X-Men were just the very biggest thing at Marvel. They were in everything, they had everything. They even had two rather extensive lines of toys running, offering pretty much everyone who showed up even for just a little while. After the 90s ended, that cooled down a bit, and they haven’t had nearly as extensive a hold on the market since. However, Diamond Select Toys, with their extensive Marvel Minimates line, is doing their very best to live up to the 90s X-Men toylines. The most recent round of ‘mates is once again centered around the team, and does its fair share to fill a few X-shaped holes. Let’s kick things off with my favorite set, Banshee vs. Pyro!

THE FIGURES THEMSELVES

This two pack is part of Marvel Minimates Series 60. The series is an even split between the X-Men and their foes the Brotherhood of Evil Mutants. Each set includes one X-Man and one Brotherhood member, and, as an added bonus, three of the four sets feature parts to turn the X-Man into another member of the team.

BANSHEE

Banshee&Pyro3Banshee is a figure we’ve been waiting quite some time for. He started popping up on wishlists just a few series into the line, mostly due to his absence from the Giant-Size X-Men #1 boxed set. Then he showed up as one of the choices in the Series 50 poll, but was ultimately not one of the finalists. Now we’ve finally gotten him. Of course, he’s in his 90s Strike Force uniform instead of his traditional green and yellow, but let’s not split hairs here. We got Banshee! Focus on the positive! The figure stands 2 ½ inches tall and features the usual 14 points of articulation. As I noted above, this is Banshee’s Jim Lee design from the 90s. It’s not his longest lasting look, but he did wear it in a few noteworthy appearances. He uses the standard Minimate body, with the addition of a hairpiece, cape, gloves, leg straps, and boot straps. I believe that the gloves are new to this series, though they are used on all of the X-Men in this series. The rest of the pieces are some rather clever re-use. The hair is from the Infinity Gauntlet set’s Adam Warlock, the cape is from the Secret Wars set’s Photon, and the straps are all from Series 34’s 90s Cyclops. All of the pieces are well-sculpted and well-chosen for Banshee’s look. Banshee’s paintwork is generally pretty good. The colors are nice and bold, and the detail lines are all very well Banshee&Pyro2applied. There is a little bit of bleed over here and there on the changes from blue to yellow, and the belt buckle isn’t fully red like it should be. All minor things, but things that it would be nice to see handled just a bit better. Banshee is packed with a piece replicating his sonic scream ability, a flight stand, and a clear display stand. In addition to the Banshee parts, he also includes parts to transform the figure into Gambit. He has a head, hairpiece, set of card throwing hands, and a satchel. All of these pieces are very nice, and they translate the figure to Gambit quite expertly.

PYRO

Banshee&Pyro5Now, the wait for Pyro alone hasn’t quite been as extensive as it was for Banshee, but he and his fellow Brotherhood members have been waiting in the wings for a little while. Like Banshee, Pyro is about 2 ½ inches tall and has 14 points of articulation. The collar piece is a little bit restricting of the head movement, but it’s still there, so that’s good. Pyro makes use of add-on pieces for his mask, collar, and gloves. All of these pieces are new to Pyro, and they’re all pretty good adaptations of his comic design. The mask is a little soft on the details, but it’s not too bad. The paintwork on Pyro isn’t quite as good as Banshee, but it’s still not horrid. The biggest issues seem to occur on the mask, where the paint is only in the same general area of where it should be, which is rather distressing. Aside from that, the colors are nicely chosen and the linework is all pretty clean. In particular, I really like the fully detailed face under the mask. It has a lot of personality. Pyro includes two flame constructs and a clear display stand.

THE ME HALF OF THE EQUATION

I picked this set up all by itself from my local comicbook store. They had three of the four other sets, but this was the only one I felt like I had to get right away. These are two of my favorite X-Men characters, and they turned out quite nicely. I can’t wait to get the rest of the series now!

Banshee&Pyro4

#0551: Ultron

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ULTRON

THE VAULT

UltronTB1

Countdown to Avengers: Age of Ultron: 5 days remaining.

Alright, now we get to the main event! Before, I was looking at figures of the various Avengers members from the upcoming movie, but from here on out, it’s all Ultron all the time! Poor Ultron went quite a while without seeing any action figures. He didn’t even get a figure in Mattel’s Secret Wars line, despite being a part of the comic upon which the toyline had been based (thanks Mattel…). He was finally granted a figure during ToyBiz’s 5-inch Marvel heyday.

THE FIGURE ITSELF

UltronTB2Ultron was released as part of ToyBiz’s The Vault line. The Vault was one of several one series lines that ToyBiz released around the same time, covering lots of different parts of the Marvel universe. The Vault is named after the Marvel universe high-security prison of the same name, and it featured a line-up of three lesser-known Marvel villains. This figure is on the larger side for this scale, at roughly 6 inches in height, and he has 16 points of articulation. The figure features an all-new sculpt, which remained unique to this figure. I’m not 100% certain, but I don’t believe this design is one from the comics. It definitely isn’t the “classic” Ultron, that’s for sure. It plays up the more robotic aspects of the character, which I suppose is a plus, but it lacks the elegant simplicity of the classic design. All that said, it’s a perfectly reasonable sculpt from a purely aesthetic standpoint. There are a nice variety of textures and details, and that helps to liven the figure up a bit. I quite like the clawed hands and two-toed feet. The head is probably the figure’s weakest point(and that’ll be a recurring point for the rest of the week); Ultron’s had loads of different body types over the years, but the one thing to remain fairly consistent is his head. It’s not awful here, but it’s pretty far from the standard Ultron noggin. It’s too thin, and it looks particularly pinched around the antennae. And speaking of those antennae, they represent another pretty big departure from the usual Ultron look. They should be further down on his head, hovering over his cheeks. Instead, they start where his “ears” would be and go upwards, looking a bit like a rabbit’s ears. The figure also suffers from some somewhat wonky paint apps. The actual color of his outer shell is wildly inconsistent, ranging from sliver with very slight blue overtones to a rather deep metallic blue in a few areas. Also, there’s this weird thing on his torso and lower legs where he’s got these strange somewhat transparent dark grey brush strokes. I don’t really know what they’re supposed to be, but they just kind of stick out and they were rather different from figure to figure. Ultron was packed with some sort of containment piece, which went over his head and hands and plugged into his shoulder. It was kind of cool, but ultimately non-essential (and I lost mine anyway). In addition to the restraints, Ultron also has a light-u feature, which made his eyes glow red when a button on his back was pushed.

THE ME HALF OF THE EQUATION

This figure was actually my very first exposure to the character of Ultron. My dad, who was an avid Avengers fan, purchased one for himself, and when I asked who he was I was presented with several of his comic appearances to read. I pretty much immediately fell in love with the character. Not long after, I received my own Ultron figure as a Christmas gift from my good friend Pat Sponagle. Sure, he’s not the most accurate Ultron figure, but he was the only one in existence at the time. And, as the old saying goes, beggars can’t be choosers. Eventually, I got the more classically inspired United They Stand Ultron, but this one served as one of my favorite figures up to that point, and he still holds some meaning to me. Inaccuracies aside, he’s a good toy.

#0549: Quicksilver

Posted by Ethan Wilson in Reviews and tagged with , , , ,

QUICKSILVER

X-MEN (TOYBIZ)

Countdown to Avengers: Age of Ultron: 7 days remaining.

Alright, we just took a look at Scarlet Witch and Hawkeye, two of the most important Avengers in my books. They both joined the team back in Avengers #16, along with the subject of today’s review, Quicksilver. They were led by Captain America and dubbed “Cap’s Kooky Quartet.” Yeah, it was the 60s. Anyway, Quicksilver is an Avenger of moderate importance, though he’s not quite on the same level as the other two. Still, he’s an important guy, and seeing as he’s Scarlet Witch’s twin brother, it’s a little difficult to have one without the other. Plus he had that fantastic scene in X-Men: Days of Future Past, so he’s going places. Let’s look at one of his action figures!

THE FIGURE ITSELF

Quicksilver was released in ToyBiz’s 90s X-Men line as part of their infamous “Muntant Armor” series. The figure was available in two possible decos: his classic blue and white and his current (at the time) white and grey. This one, in case you hadn’t already noted, is the white and grey, which, for those interested, was designed by legendary artist George Perez when he helped re-launch The Avengers in the 90s. The figure is 5 inches tall and has 11 points of articulation. Quicksilver was built on one of ToyBiz’s recurring male bodies of their 5 inch lines, which first popped up in the sixth series of ToyBiz’s Spider-Man line. It’s a pretty decent sculpt, with a nice, lean look, and a decent amount of movement. The only real downside is the left hand, which was hastily retooled from a web-shooting pose, resulting in a rather strange looking fist. In addition to the base body, Quicksilver features a head that is sort of new. The facial structure is the same as that of the “Battle Brigade” series Archangel, but the hair is completely new, giving us Pietro’s signature ‘do. The face is actually a lot better for Quicksilver than it was for Archangel, and the hair is very nicely handled, so it works very well. The figure’s paintwork is generally pretty well-done, though mine has taken its fair share of wear and tear. The lines are a bit fuzzy in some places, but overall the figure is pretty decent. The semi-metallic sheen on the dark grey parts is actually pretty cool, so there’s that. Quicksilver was packed with a stands shaped like a dust cloud and some sort of strange machine gun thing. Most intriguing about this is that he doesn’t actually have any armor, not even of the “Muntant” variety.

THE ME HALF OF THE EQUATION

I got Quicksilver at a local toyshow, which my dad took me to, probably about 15 years ago. I remember that I was never able to find either of the Quicksilver figures when they were at retail. My dad had the blue and white version, but my collection was sadly Quicksilver-less. So, when I found this guy, I was pretty excited. I didn’t have a choice in deco, but I actually like this one, so it worked out. This figure’s still a pretty strong figure, even after almost 20 years. I’m certainly glad I found one!

#0547: Hawkeye

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

HAWKEYE

IRON MAN (TOYBIZ)

Countdown to Avengers: Age of Ultron: 9 days remaining.

Okay, we’re very definitely getting into the selection of characters that I consider to be the quintessential Avengers.  And no one gets more quintessential-y than good ol’ Clint Barton, aka Hawkeye!   So, let’s have look at a figure of that guy, shall we?  In fact, let’s look at the very first figure of that guy ever released!  That’ll be nifty!

THE FIGURE ITSELF

Hawkeye was released in Series 2 of the 90s Iron Man line, which was done to tie-in with the Iron Man cartoon of the time.  Unsurprisingly, Hawkeye is based upon his appearance in that show, which in turn was based upon the design he had in the comics around the early 90s.  It’s a tweak on his classic design, and it’s not too overly 90s, so it works.  I do miss the buccaneer boots and loincloth, but oh well.  The figure stands roughly 5 inches in height and sports 8 points of articulation, which is actually a little bit below the standard of the time.  The lack of proper arm articulation is certainly odd, what with him being an archer and all, but he actually managed okay, thanks to the pose of his arms.  The figure’s sculpt was wholly original to him.  It’s not bad, especially for the time.  The proportions are generally pretty good.  The hands and feet are a little on the large side, and the shoulders are a little high-set.  He’s also got some ridiculously defined musculature, but to be fair, that’s actually true to the show.  The costume details are pretty well handled, with clean lines and some nice texture work on the purple parts.  The head is pretty much spot on for the character, with just the right amount of cockiness in his expression.  Hawkeye’s paintwork is pretty much on par with other figures from the same time.  It’s simple, but well-done.  The colors are nice and bold, and everything is clean, with no real slop or bleed over.  The eyes are totally white and pupil-less, which is not in keeping with his appearance on the show.  However, given how small they are, it’s likely that pupils would have looked rather goofy here, so it was probably the right call.  Hawkeye included a bow, arrow, quiver, a small knife, and the weird character badge thingy that was included with all of the figures in the first few series.  Of course, my figure has none of these things because silly child Ethan decided to lose them all.  Way to go younger me! [EDIT–But then adult me found them again, and I talked about them in this figure’s Flashback Friday Figure Addendum!]

THE ME HALF OF THE EQUATION

So, I don’t recall the exact circumstances by which I came to own Hawkeye.  I’m fairly certain that he was a gift from my parents.  I know my Dad had a Hawkeye figure first, and that I really liked it, so I’m pretty sure he took note of this and bought me one of my own.  It’s definitely an important piece in my becoming such an Avengers fanatic, I know that much.  Looking back at it, it’s not a perfect figure.  The arms are a weird choice, and he’s held back a little by the fact that he’s in a relatively short-lived costume.  All that said, he’s my first Hawkeye figure, and he’s still my favorite.

#0527: Green Goblin

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

GREEN GOBLIN

SPIDER-MAN (TOYBIZ)

Alright guys, after a brief stop over into the strange bizzaro world of The Stapler in Question, we are back at home with the action figures. Yay! So, back in the 90s, the 5-inch scale Marvel figures, produced by the very much at the height of their game ToyBiz were totally my jam. The figures were (at least loosely) based on the then current cartoons. Amongst those cartoons was Spider-Man: The Animated Series, which ended up with a fairly nice toyline of its own, at least for a few series. So, let’s have a look at one of Spidey’s greatest foes, the Green Goblin, as he was presented in said line.

THE FIGURE ITSELF

GreenGoblin90sWilsonGreen Goblin was released as part of Series 3 of ToyBiz’s Spider-Man line. The cartoon did this odd thing where Hobgoblin preceded Green Goblin, which resulted in Hobs taking the Goblin slot in Series 1. And Goblins never go for even numbered series. That’s just not how they roll. The figure is about 5 inches tall, with 9 points of articulation. He’s pretty much standard for a ToyBiz figure of the time. He’s based on the character’s animated appearance, which itself was a fairly faithful recreation of the comics design. Mostly, it just comes down to style cues, resulting in a slightly “friendlier” looking Goblin. Surprisingly, Green Goblin got his own sculpt, which shared no pieces with Series 1’s Hobgoblin. I think that may be the only time these two have both appeared in a line with no re-use at all. Impressive. The sculpt itself ends up being quite impressive, with not only some pretty good proportions, but also some killer texturing, especially on the scaly arms and legs. They aren’t super-detailed like some of the sculpts that followed, but they are a great example of using just enough detail to suggest the rest (which, incidentally, is how Goblin was drawn for most of his classic appearances). Also, it’s an odd thing to point out, but this figure has some of the best hand sculpts of any figure from this time. Most were molded in a generic clasping positon, but Goblin has one splayed as if it’s just thrown a pumpkin bomb and one in a pointing position. I don’t know what he’s pointing at, but at least it’s different. Goblin’s paintwork isn’t quite up to the same level as the sculpt, but it’s pretty much on par with just about everything else being offered at the time. The colors match up pretty well to the show’s design. The colors don’t so much match up to themselves, however. The purple ends up changing a few times over the course of the figure, which is rather distracting. There is also some rather noticeable bleed over around the edges of the gloves and boots, and the edges on the shorts aren’t even close to being even. Green Goblin included his faithful goblin glider (which even launched missiles) and a pumpkin, but pesky child-Ethan lost them! (Or did he?)

THE ME HALF OF THE EQUATION

As into the ToyBiz Marvel stuff as I was as a kid, I actually ended up avoiding a lot of the Spider-Man line. The cartoon never really gripped me like the others, so I just never really had the connection. So, Goblin here wasn’t part of my “initial collection.” He was a later acquisition, fished out of a bin of low priced figures at a nearby comic book store sometime around the mid-00s. I don’t know exactly why I picked him up, but I imagine I was just filling in some gaps in the collection at low prices. Going back to review this guy, he surprised me. With most of the 5-inch figures, the nostalgia filter is firmly in place, but not for this one, and yet he still impressed me. That really says something.

#0511: Gorn Captain

Posted by Ethan Wilson in Reviews and tagged with , , ,

GORN CAPTAIN

STAR TREK (PLAYMATES)

Gorn1

When people think of Star Trek, more often than not, they’ll think of the show’s main crew members, or perhaps the scantily clad green alien woman. What tends to get overlooked, especially in the case of the original series, is the plethora of alien creatures that appeared on the show. In terms of toys, the aliens tend to get no respect. Often, they’ll be needlessly changed, or under produced, or even replaced by aliens made up by the toymakers. However, under the helm of Playmates in the 90s, the aliens actually did get a little bit of respect. Since the line was so big and they had to keep it interesting somehow, they turned to the aliens to liven things up. One such figure is today’s focus, the Gorn Captain.

THE FIGURE ITSELF

Gorn2The Gorn Captain was part of the Classic Trek 30th Anniversary assortment, released by Playmates in 1996. The assortment was released in waves of 2-3 figures each. The Gorn was from one of the later waves, along with Environmental Suit Kirk and the Mugato. The Gorn Captain is based on the character’s lone appearance in the Classic Trek episode “Arena.” The figure is just shy of 5 inches in height and he features 9 points of articulation. He has less articulation than what was standard for the line, which, sadly, was true for quite a few of the aliens in the Classic Trek line. The removal of the bicep swivels and waist movement are both rather annoying. The figure manages okay without them, but their absence is just baffling. On the plus side, this figure actually ends up making the v joint on the hips work pretty well, which can’t be said for the rest of the line. The Gorn Captain’s sculpt is wholly original to him, and generally speaking, it’s actually very well handled. While Playmates was known to have trouble with proportions on the human figures, creature figures played to their strengths. Aside from the torso being a little bit flat, the figure’s proportions are a close match for the Gorn’s appearance on the show. The sculpt exhibits some stand-out texture work on the skin, something not often seen on a figure from this time. It really helps set him apart from the other figures in the line, and other figures from the time in general. The Gorn had a rather distinctive facial design, and the figure’s head sculpt is a spot-on recreation of the mask from the show. The figure’s paint is generally pretty straight forward, but it’s rather good for the time. Most of the base paintwork is cleanly applied, and there’s even a light application of brown on the figure’s shoulders, which helps to sell the reptilian look of the character quite nicely. The Gorn Captain was packaged with a stone spike, the cannon constructed by Kirk in the episode, three projectiles, a display stand, and a trading card.

THE ME HALF OF THE EQUATION

Back in the 90s, when my dad was collecting the Playmates line, I vividly remember the purchase of the Gorn.  I was fixated on the figure, and have loved the character ever since. According to my dad, he actually went out and bought me a Gorn figure, with the intent to give it to me as a gift. However, it ended up going missing somewhere, so I never ended up getting one. In the years that followed, the Gorn figure always seemed to evade me. Fortunately, one of the dealers at this year’s Farpoint had one amongst a large selection of other Playmates Trek figures. So, I finally have my Gorn figure! Sure, he may not be the greatest figure of all time, but he’s definitely fun, and I’m just super thrilled to own one.

Gorn3

 

EDIT: Wow, I certainly lucked out in posting a mostly green figure for St Patrick’s Day, didn’t I?  I swear it wasn’t at all planned!

#0506: Han Solo – Bespin

Posted by Ethan Wilson in Reviews and tagged with , , , ,

HAN SOLO – BESPIN

POWER OF THE FORCE II

HanBespin1

Hey! Do you like reading about Han Solo figures? I sure hope you do, cuz I’m reviewing another one today. Yes, after the barrel of laughs I had writing yesterday’s review, I thought, why not another one? So, I’ll be wrapping up this little subset of Power of the Force II reviews with another Han Solo. Yay!

THE FIGURE ITSELF

HanBespin2This particular Han found himself released in the second year of Kenner’s Power of the Force II line. After doing the primary looks of most of the main characters from A New Hope (as well as one or two figures from the other two movies), the second year turned to the later looks of the primary characters, just to make sure the line didn’t run out of Hans and Lukes. So, Han is based on his primary look from Empire Strikes Back, commonly referred to as his Bespin look, as it’s what he’s wearing during all of those scenes. It’s definitely a fan-favorite look, and I’d say its popularity rivals the ANH look. The figure is about 3 ¾ inches tall and he has 6 points of articulation. The figure’s sculpt is mostly new, with the exception of the head, which is re-used from the previous Han figure. That was definitely the best sculpted piece on the last figure, but it’s still saddled with its own set of issues, chief among them being it just doesn’t really look like Han Solo. That said, it’s on an entirely new body here, and that does the sculpt a few favors, chief amongst them being that the head is just a heck of a lot more proportional with the new body. Kenner kind of caught on to some of the complaints about the first assortment of POTF II figures’ proportions, so later assortments ended up at least a tad less ridiculous. Han is still a little bulky, but it’s more evenly spread this time. He lacks the laughable hour glass figure of the previous Han, and his arms don’t look like they’re about to bust the seams of his sleeves either. Those are both pretty big improvements. The figure’s clothes also have a fair bit more texture this time around, especially the shirt and coat, which helps make the figure at least a little more interesting looking. Sadly, he still has some oddly posed legs, but at least they look more like a deep step this time than the freaking side lunge that smuggler Han was doing. The paintwork on Han is overall pretty clean and well handled, and it seems to be better that the other Han. However, there’s a paint chip on his neck, which is rather annoying. Also, the most glaring issue with that paint is that they flat out got the color of his coat wrong. In the movie it’s very definitely blue. Here, it’s black for some reason. I wonder why that happened. Han includes his trademark (and still way oversized) blaster pistol, as a large gun, which I am once again pretty certain he never actually carries in the movies.

THE ME HALF OF THE EQUATION

Okay, so while I didn’t actually have this figure growing up, I did get to play with one on a fairly regular basis. See, my grandmother wanted my cousin Patrick and me to have some figures to play with when we stayed with her, so she had me pick out a handful of POTF II figures for the two of us. This version of Han was among them. Patrick and I had dug out a small little dirt pit in the back yard, which we used as a stand in for the Sarlac Pit, and one day, it started raining and we had to run back in. We thought we had grabbed all of the figures, but poor Han got left behind. The next time we were both at the house, our grandfather had filled in the pit. Patrick and I dug for a while, but Han was nowhere to be found. It’s always been that figure that got away. While at Farpoint this year, still high from the excitement of getting the other POTF II figures from the charity sale, I found this Han at one of the dealer’s tables. His package had yellowed so much that it looked like the poor guy had been encased in amber, but the figure was just fine. And now I have that Han figure again. Huzzah!

#0505: Han Solo

Posted by Ethan Wilson in Reviews and tagged with , , , ,

HAN SOLO

POWER OF THE FORCE II

HanANH1

I’m desperately trying to come up with a good intro here, and literally the only thing going through my head is “Han Solo Cup.” Of which I feel rather ashamed. Yesterday, I remarked that I never had any of the Power of the Force II Stormtroopers. Well, funny thing about that is, on the flip side, the only Han Solo I owned from the line was Stormtrooper disguise Han. And, in what seems to be the story of my adult collecting life in general, I’ve decided to fix that. So, let’s look at a Han Solo figure!

THE FIGURE ITSELF

HanANH2Han was released in the first assortment of POTF II figures, which shouldn’t really surprise anyone. He was Han freaking Solo after all. He’s roughly 3 ¾ inches in height, and he has the line’s standard 6 points of articulation. He’s based on Han’s primary look from A New Hope, which is generally the look most people associate with the character. Han’s sculpt was original to him, and it exhibits a lot of the same style cues present in other POTF II figures. Let’s start off with the basic proportions of the figure: he has an overall body-builder-esque physique, but even by body-builder standards, he’s a bit absurd. His shoulders are really broad, and his arms are practically bursting out of his sleeves. He also has the huge hands and impossibly thin waist that were prevalent in the line. Han, more so than others in the line, feels like a cartoon caricature, not a human being. On top of the proportions, Han’s sculpt is plagued by a few issues. Like a lot of the others in this line, Han’s legs are somewhat strangely posed, requiring that he stand in a deep stance to be even remotely balanced while standing. Also, though his hands may be large, they haven’t been sculpted to really hold anything. This is the worst on his right hand, you know, the one he holds his blaster with, which is sculpted flat, so he can’t actually do so. Finally, there’s the head. Now, to be fair, the head is easily the best part of this figure, especially from a technical standpoint. There’s some really nice detail and texturing. However, it seems like the sculptor was working from pictures of Harrison Ford at the time these figures were made, instead of at the time of the movies. And even then, it’s hard to see a lot of Ford in this sculpt. He looks a bit like the lovechild of Ford and Tommy Lee Jones, which, needless to say, isn’t Han Solo. Han’s paintwork is pretty much typical for the time. It’s certainly not bad, but it’s not anything amazing either. Everything is pretty much where it’s supposed to be, and there aren’t really any issues with bleed over or slop.  Han included his signature blaster pistol, which is hysterically oversized, and a larger blaster rifle, which doesn’t appear to be one he carries in the film.

THE ME HALF OF THE EQUATION

As I mentioned in the intro, this isn’t the Han I had growing up. I think part of what turned me off to Han figures in general was that likeness he had. I just didn’t like that Han looked so much older than he should. But, over time, the old Han figure has started to grow on me. So, Han ended up being one of the POTF II figures that I fished out of the charity sale box at this year’s Farpoint. Like the Stormtrooper, he’s definitely a goofy figure, but I feel a twinge of nostalgia for this guy.

#0504: Stormtrooper

Posted by Ethan Wilson in Reviews and tagged with , , , ,

STORMTROOPER

POWER OF THE FORCE II

StormtrooperPOTF2a

When I was younger, I had my fair share of figures from Kenner’s Power of the Force II line. Seeing as it was the only Star Wars line around when I was younger, it was these guys or nothing. So, these guys it was. For whatever reason, however, I never found myself with a basic Stormtrooper figure. In fact, until recently, the only Stormtroopers I had were the vintage ones my Dad gave me. But, now I’m looking to change that (I guess), so here’s a Stormtrooper from POTF II!

THE FIGURE ITSELF

StormtrooperPOTF2bThe Stormtrooper was released in the first 1995 assortment of Power of the Force II figures. He stands roughly 3 ¾ inches tall and he has 6 whole points of articulation. This is usually the point of the review where I’d say that I don’t know which of the three Stormtrooper designs was used for the figure, but in actuality, it’s fairly clear that this figure is an amalgam of those three designs (and Arnold Schwarzenegger). The entirely of the POTF II line was stricken by some serious steroid use, but the Stormtrooper seems to have been hit the hardest. The most apparent problem with this figure’s sculpt is the fact that he clearly has no neck. Previous troopers didn’t actually show the neck, but they at least made the helmet long enough that you could actually believe there might be one under there. Not the case here. This guy’s just got a head and then some shoulders, with nothing in between. The head sits atop a huge barrel chest that goes into a serious hour glass at the waist, which is certainly an impressive feat, I’ll give him that. The figure then has the requisite arms and legs with a 45 degree bend, just so he can look a little extra awkward. The legs in particular are bad, because they make him rather difficult to keep standing. On top of the oddly proportioned body, the armor is forced to either cooperate with these new found proportions or go home. It’s chosen the former, which means that the details are kind of a rough estimate of what they were in the movies. The figure’s paint is the simplest of the simple, with only a few spots or black here and there, to break up all of that white. The paint is rather sloppily applied; I guess it just follows that rough estimate thing that the sculpt was doing. The Stormtrooper includes his standard blaster rifle, which he can only hold in one hand, and a larger rifle, which he can also only hold in one hand.

THE ME HALF OF THE EQUATION

Just like yesterday’s Obi-Wan, the Stormtrooper was fished out of a rather large box of Star Wars figures being sold to benefit the Farpoint charities. I must admit to being rather excited when I pulled this guy out. Sure, he’s goofy as hell, but he really resonates with me, for some odd reason. I mean, how could my collection possibly be complete without a muscle-bound Stormtrooper?

#0503: Obi-Wan Kenobi

Posted by Ethan Wilson in Reviews and tagged with , , , ,

OBI-WAN KENOBI

POWER OF THE FORCE II

ObiWanPOTF1

Power of the Force II is really important to me. The line is certainly rather dated by today’s standards, probably even more so than even the vintage line, but it brought the Star Wars brand back to shelves after almost 10 years of absence. And, more importantly, it was the line on the shelves in the mid-1990s, just as a certain toy reviewer was getting into action figures. So, today, let’s have a look at that line’s take on Obi-Wan Kenobi, from back in the days when he’d only been played by one actor!

THE FIGURE ITSELF

ObiWanPOTF2Obi-Wan was released in the first assortment of Power of the Force II figures, which started showing up in 1995-1996. The figure is about 3 ¾ inches in height and he had 6 points of articulation. Oh boy, that waist articulation! Obi-Wan is based on the character’s appearance in A New Hope. Like the rest of the POTF II line, Obi-Wan’s proportions are a little bit whacked. He doesn’t quite have the body builder’s physique that some of the others did, but he’s got some fairly broad shoulders, and man, just look at the size of those hands! Also, his legs have a pretty odd leg posing, which kind of makes him have to stand with a strange stance. For some reason, his outer robes have been done using a removable add-on. The end result is that the figure ends up quite a bit bulkier than he should be. Since the sleeves are still brown to match the outer robe, I honestly can’t think of the practical use for a removable piece. Admittedly, the head is actually a decent sculpt. It has a passing resemblance to Alec Guinness, if perhaps a little squashed. Obi-Wan’s paintwork is decent. Not great, but certainly not bad. There’s a little bit of bleed over in a few of the transition areas. Also, it’s true to the film, but the figure is rather dull, color-wise. You know what makes people want a figure of an old guy? Dull colors. Obi-Wan includes one accessory: his lightsaber. The lightsaber is absurdly long (taller than Obi-Wan), which kinda makes you wonder if old Ben is compensating for something.

THE ME HALF OF THE EQUATION

This marks the second of this figure that I have owned. I got my original around the same time as all the others I have from this line, which is when they were first released. I ended up trading that figure for a Val Kilmer Batman variant (what can I say, I was young and foolish!).  I’ve gone all these years without picking up another one. While I was at Farpoint this year, I fished Obi-Wan, along with a few other POTF II figures out of a box of various Star Wars figures that were being sold to benefit the two Farpoint charities. So, I not only got to replace my original figure, but I also got to feel sorta good about it. That’s pretty cool, I guess.