Tag Archives: All Time Toys

#2717: Wonder Woman – Last Knight on Earth

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

WONDER WOMAN — LAST KNIGHT ON EARTH

DC MULTIVERSE (MCFARLANE TOYS)

“The world has been destroyed. The Super Heroes lost, and a new evil by the name of Omega has taken over what’s left. Now, 20 years in the future, Wonder Woman leads a faction of heroes and survivors living underground known as the New Amazons. Hiding from the world above in order to stay alive, Diana and her band of warriors must choose between retreating deeper beneath the Earth’s surface or fighting for a better tomorrow.”

Have I mentioned the Batman-centric nature of McFarlane’s DC output?  Yes.  Yes, I have.  As has everyone else.  Many times.  It’s not new or different, and at this point, none of us should be surprised by each subsequent Batman he adds.  Let’s just try to enjoy the few not-Batman figures we get mixed in, right?  After initially swearing off them, the latest assortment adds up to a Build-A-Figure, and is all based on Snyder and Capullo’s “Batman: The Last Knight on Earth.”  In the story, most of the other super heroes are dead, so there’s not a lot of room for others in the toys, but Wonder Woman serves as a notable player in the whole thing, and found herself included in the first line-up.  Dig it.  That’s gonna be the one I’m looking at.  Dig it again.

THE FIGURE ITSELF

Wonder Woman is one of the four figures in the latest Build-A-Thing assortment of DC Multiverse, all patterned on “Last Knight.”  They were officially slated for the end of March, but starting showing up in a few places towards the end of February.  Wonder Woman and Scarecrow are the two lighter packed figures in the set, which makes sense thematically, I suppose.  The figure’s quite tall, and almost 7 1/2 inches tall, and she has 38 points of articulation.  At this point, the articulation scheme for the McFarlane DC figures is pretty set, so Wonder Woman kind of follows that set-up.  She’s got a pretty solid range of motion on most of the joints, and in general I found her easier to pose than most of the other McFarlane figures I’ve grabbed.  Wonder Woman’s sculpt is another all-new piece, patterned on Greg Capullo’s illustrations of the character from the book.  McFarlane’s no doubt got some experience translating Capullo’s art into three dimensions, so it does overall work out a bit better than, say, their go at Jim Lee’s style with Superman.  That being said, it’s not quite as faithful a recreation of Capullo’s art as the DCC figures from a few years back, and is definitely a bit more in line with McFarlane’s house style.  The figure seems to be an earlier-in-the-story Wonder Woman, since she’s lacking the scarring on her face.  Oddly, she’s also sporting some stubble on the non-mohawk portions of her head, which she never really has in-story.  Another symptom of that house style peaking through.  Overall, it’s not a bad piece of work.  She hasn’t had any unnecessary extra details added, apart from the stubble, and the costume seems to match well with Capullo’s design.  The general proportions, while certainly stylized, aren’t as wonky as some of the prior figures, and the detail work is pretty solid.  The texturing on the cape in particular is quite impressive.  That said, there’s some really rough flashing on the cape for my figure, which, given the ragged nature of the design, isn’t immediately noticeable, but is still really sloppy for a professionally produced figure.  On the plus side, her paint work is all pretty clean.  The base work’s all there and rather decent for the most part.  There’s some slight mismatch between the molded fleshtone that makes up the bulk of the figure, and the tiny bit that’s painted on the skirt piece, and I also question why they’ve molded the lower knee joints in flesh color instead of the darker red of the boots.  Otherwise, it’s nice work.  Wonder Woman is packed with her sword and a stand (which she needs, because she struggles to stand on her own), as well as the arms of the Bane Build-A-Figure, which I don’t have.  It’s a shame she didn’t get the Doctor Fate helmet as well, but I guess she’s got the basics.

THE ME HALF OF THE EQUATION

I didn’t really intend to get this figure.  I mean, she’s got a decent look to her, and I was mildly intrigued, but not enough to justify the whole cost of purchase.  Max, on the other hand, was already planning to buy the other three, and decided to grab Wonder Woman to finish out the Bane figure.  He wasn’t really feeling Wonder Woman, so I ended up splitting the package with him, and took the Wonder Woman on her own.  She’s another one of those designs that’s really up McFarlane’s alley, and that results in her being another pretty strong figure.  And she’s not even a Batman.

#2712: Cobra Infantry

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

COBRA INFANTRY

G.I. JOE: CLASSIFIED SERIES (HASBRO)

G.I. Joe: Classified Series had something of a jumpstart last year, somewhat stunted by the fact that, like, more than half of the line at this point has been exclusives.  Several key pieces of the franchise, in fact, have been exclusives, and notably, that’s been two of the line’s three army builders.  I looked at the Cobra Trooper last fall (thanks to the small miracle that allowed me to actual get my hands on one), and now I’m taking a look at another one.  How about that?

THE FIGURE ITSELF

The Cobra Infantry is figure 24 in the G.I. Joe: Classified Series line-up, technically from the third “wave” of standard release figures for the line, although Hasbro’s kind of moving away from actual assortments, in favor of single releases in solid cases.  Also, hey, there’s some novelty to a standard release figure, isn’t there?  It’s…been a while.  The figure stands 6 inches tall and he has 37 points of articulation.  Structurally, the Cobra Infantry figure is the same figure as the Target-exclusive Cobra Trooper.  Given the relative rarity of that release, a pretty straight re-use makes quite a bit of sense.  It helps that it was a very impressive sculpt the first time I looked at it, which means I really don’t mind seeing it again.  As I discussed in the prior review, it’s a good summation of a number of the Cobra Trooper designs from over the years, and there’s just a lot of really great small detail worked in.  The first change of note from the Trooper to the Infantry is on the paint scheme.  This release is, per Hasbro, a little more animation inspired, which largely seems to have translated to having more blue than the previous release.  Upon the prototype’s reveal, a lot of fans speculated that this extra blue meant that Hasbro was simply cutting paint apps from the prior release, but in-hand this is very definitely not the case.  It’s easy to miss at first glance, but the paint scheme this time around is actually a fair bit more complex, with a lot more variations within the various colors, especially the blues.  It’s quite impressive to behold in hand.  Additionally, the skin tone has been slightly darkened on this guy, giving him a bit of variance when compared to the other release.  The other change-up between the two figures is the accessory selection.  The Target Trooper had a lot of extras, while this one dials it down ever so slightly.  He gets the removable helmet, the standard rifle, the two pistols, and the knife.  While this lacks the customizability angle of the prior figure, it keeps everything you could classify as “standard”, making this one a but more ideal for actually army building.

THE ME HALF OF THE EQUATION

Between the two of us, Max and I were able to snag a single Target Trooper.  Max was kind enough to loan it to me for the purposes of reviewing, but that meant I didn’t actually have one for my personal set-up.  Fortunately, I was pretty sure this guy was coming, even before he was announced, and once he was shown off, I knew it was just the waiting game.  Honestly, I’m glad I waited.  As I said when I reviewed the other version, he’s nice, but I don’t know that he was quite worth all the fuss.  This one’s a bit more paired down, but keeps the stuff I really liked from the last release, and if I’m totally honest, I find myself far preferring the color scheme on this release anyway.  Ultimately, he’s pretty solid, and hopefully he proves a little bit easier to army build.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#2711: Toxin

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

TOXIN

MARVEL LEGENDS (HASBRO)

“The 1,000th symbiote in a lineage that includes Carnage and Venom, Toxin is feared by many to be the strongest and most dangerous.”

After the craziest of the symbiote-overload in the ’90s died down, Marvel decided they wanted to try again.  So, Carnage once again had some spawn, but just the one this time.  The end result was Toxin, who, in contrast to Venom and Carnage, was not an inherently malicious creature.  Initially bonded with police officer Patrick Mulligan, Toxin served as an ally to Spider-Man, rather than either of his progenitors.  After Mulligan’s death, Toxin was then shifted over to usual Venom host Eddie Brock for a bit, as Eddie moved his way through a handful of symbiotes.  Toxin’s been privy to a few figures over the years, twice now getting a Legends release.  The first one wasn’t much to write home about, but maybe this new one will change things up a bit?

THE FIGURE ITSELF

Toxin is the latest Deluxe-sized offering for Marvel Legends.  He follows the trend set by Apocalypse, being a new larger scale figure, as opposed to a reissue of a prior Build-A-Figure.  Toxin’s had a few somewhat divergent looks over the years, and this one grabs a few elements from each of them and merges them all together into one thing.  He’s definitely more monstrous than Mulligan usually was, and the face is definitely lifted from Brock’s time with the symbiote, but the general appearance is still definitely an earlier Toxin look.  The figure stands 7 3/4 inches tall and he has 30 points of articulation.  Toxin is built on Monster Venom body, which seems a little bit on the large side for Toxin’s usual depictions, but it’s honestly a little on the large side, even for the two Venom figures it was used for.  The symbiotes just tend to get sized up a bit, I guess, when it comes to toys.  The Monster Venom body remains a very impressive piece of work, and I can understand Hasbro wanting to get more mileage out of it.  To change things up, Toxin gets a new head, and a slightly tweaked back plate, as well as tendrils.  So many tendrils.  More tendrils than we have room for.  Elevendrils.  It’s really intense, and it really works.  Certainly continues the dynamic nature of the Monster Venom body.  The tendrils are popped on in stages, so you can kind of tweak just how tendril-y he is if you like.  It does mean they pop off on their own occasionally, but it’s overall not too bad.  Toxin’s paint work is generally decent.  The red’s very bright, which I rather like; it contrasts well with the black on the other portions of the figure, and makes him more eye catching than Hasbro’s last attempt.  The transition from red to black is also pretty nicely handled, managing to be pretty subtle, and to maintain a consistent look across multiple pieces.  The red sections could, I suppose, stand to have a little more accenting on them, but that’s about the only thing I can really knock.

THE ME HALF OF THE EQUATION

My actual experience with Toxin is pretty limited.  I’m familiar with him as a character, and I know the toys, but I don’t believe I’ve actually read any of his comics appearances.  He’s got a halfway decent visual, though, and this figure using the Monster Venom body, which I really quite like, gave him some points in his favor.  The end product’s pretty nifty.  If you like Symbiotes, you’ll like this one, and he’s certainly a step-up from the last version.  Now, if we could get the slightly less monstered out Mulligan version at some point, that’d be pretty sweet too.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for Marvel Legends, or other toys both old and new, please check out their website and their eBay storefront.

#2710: Firestar

Posted by Ethan Wilson in Reviews and tagged with , , , ,

FIRESTAR

MARVEL LEGENDS (HASBRO)

“Angelica Jones soars into battle harnessing the power of microwaves to combat evil as Marvel’s Firestar.”

Comics adaptations introducing characters that circle back around to the comics proper isn’t an uncommon thing, going back as far as the Superman radio serials and their creation of Jimmy Olsen.  Over at Marvel’s side, things were a little bit later game for them, but one of their first instances of this was Angelica Jones, aka Firestar.  First appearing in Spider-Man & His Amazing Friends in 1981, Firestar was created when the television rights for the Human Torch couldn’t be acquired.  She found her way into the comics four years later, in Uncanny X-Men #193, as a member of the Hellions.  From there she got her own mini-series, joined the New Warriors, and even had a stint with the Avengers.  She’s never been quite as prominent in the main universe as she was in the cartoon, but she’s certainly stuck around, and made her way into most of the major Marvel scales, including, most recently, Marvel Legends.

THE FIGURE ITSELF

Firestar is her own standalone Marvel Legends release, which started hitting retail last month.  She’s another Fan Channel figure, so she won’t be hitting major big box retailers, but will be at specialty shops and the like.  She features her own separate branding, which neatly avoids the issue of whether she should be grouped with Spider-Man, X-Men, or Avengers. Firestar’s had a few different designs over the years, but she generally tends to circle back to variants of her original animation design, which is what this figure wisely opts to go for. The figure stands just over 6 inches tall and she has 27 points of articulation.  Firestar is built on the Phoenix base body, which is thematically appropriate, I suppose.  It’s also just a pretty good match for Angelica’s usual built.  She’s got a new upper torso piece, which adds her collar piece.  It’s pretty basic, but hits the spot.  Firestar includes two different head sculpts, based on two differing looks.  The one she comes out of the box wearing is slightly more modern-inspired, and has more wind-swept dynamic hair, and a slightly more rounded mask.  The second head is a bit more directly based on her animation design, with a more geometric mask, and slightly less mobile hair.  Of the two, I personally prefer the more modern head, but they’re both quite nice, and I like having the option.  Firestar’s paint work is basic, bright, and clean, which are really all the best things for a Legends figure.  I appreciate that they actually did the darker accents on the hair for the animation head, keeping it properly show accurate, since those tend to get overlooked.  Firestar has a pretty nice accessory selection.  In addition to the extra head, she also gets two sets of hands (both fists and open gesture), two effects pieces (borrowed from the Infinity War Scarlet Witch), and, coolest of all, Ms. Lion, the trio’s pet dog from Amazing Friends.  Ms. Lion even gets a ball-jointed neck for full posability.  How about that?

THE ME HALF OF THE EQUATION

Firestar’s always been a favorite of mine, thanks to the handful of Amazing Friends episodes I had on VHS as a kid.  I didn’t manage to get her Toy Biz figure until late in the game, and that one’s, admittedly, a little phoned in, as was the later Marvel Universe figure.  I’d been hoping for something with a little more effort for Marvel Legends, and that’s what I got.  This figure’s a really nice, very cleanly done take on the character, and a fantastic way of rounding out this trio in Legends form.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for Marvel Legends, or other toys both old and new, please check out their website and their eBay storefront.

#2709: Piccolo – The Proud Namekian

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

PICCOLO — THE PROUD NAMEKIAN

S.H. FIGUARTS (BANDAI)

Last year, as I delved a bit into some lock-down-induced madness and lost my steady stream of new toys for a little bit, I expanded my ever so modest selection of Dragon Ball-related reviews with a pair of Figuarts I’d grabbed second hand.  Well, it’s been, like, a year, and I’m really hoping this one’s not going to be followed by more lock-down-madness, but I’m looking at another Dragon Ball Figuart.  This time around, I’m looking at one of the franchise’s most prominent characters, Piccolo, the Proud Namekian!

THE FIGURE ITSELF

Piccolo the Proud Namekian (which is, by the way, this figure’s full and proper title) is an early 2021 release for S.H. Figuarts.  This is the third time we’ve gotten Piccolo in the line following the prior Anime and Manga colored variants of the last mold.  Both versions have shot up in price, and Figuarts have evolved somewhat since their release, so it was high time for a new version.  The figure stands 6 1/4 inches tall and he has 38 points of articulation.  Piccolo marks some pretty great strides for Figuarts articulation, at least from my interactions.  The range on these guys has always been great, but all of the joints and various separate pieces needed to give the best range generally makes the figures feel a little bit less sturdy.  As I touched on a bit in my Great Saiyaman review from last year, Piccolo is less broken up to facilitate the articulation, and just generally feels like a more solid figure, while still getting a really good range of motion.  This is especially evident on the legs, which don’t feel as floppy as some of the other figures from the line tend to be.  Notably, they lack the usual drop-hips, but are constructed in such a way that they don’t miss out on too much movement.  I definitely dig this new set-up.  Piccolo’s sculpt is an all-new offering, totally unique from the last version of the character.  This one seems to go a bit more for a slightly later-show incarnation of Piccolo, after they were consistently drawing him as a bit more bulked up, looking a bit more like his appearance post-merging with Kami.  It’s quite a nice sculpt, with sharp detailing, and a rather nice, dynamic layout to his outfit.  Right out of the box, Piccolo is in his fully kitted out set-up, with his cape and turban.  The cape is, as with most Figuarts capes, a little tricky to work with, due to its hard plastic construction.  It’s a little better handled than it was on Saiyaman, and I had less issues with it falling off on this release.  It’s using a multi-piece construction, with the shoulders and actual cape being separate parts, and the cape proper being made up of three separate sections in order to allow for more dynamic posing.  The standard head has the turban in place and a calm, more neutral expression, which is a good fit for the character.  Piccolo’s paint work is generally pretty basic, without a ton going on.  It’s cleanly applied, and bright and eye catching.  There are some very cool touches mixed in, specifically the small bit of exposed skin at his ankles; it’s an easily overlooked detail, but a cool one.  Piccolo’s accessory selection is quite impressively large.  He gets an alternate screaming expression for the turban-wearing head (the turban piece can be swapped between the two), plus three different heads without the turban, one calm, one screaming, and one with a really exaggerated expression.  He’s also got seven hands, in fist (R/L), clawing (R/L), wide gesture (R/L), and special beam cannon (R), plus an alternate set of crossed arms (rather recurrent with DBZ figures) and an extra torn off left arm stump.  Lastly, he’s got three pieces for his back; one to plug up the hole left by the cape, one for use of a stand with the cape down, and one for a stand with the cape up.  *Not* included is any sort of actual stand, as is pretty standard for Figuarts; I provided my own for the photo at the top of this review.  All in all, this selection of extras covers all the major Piccolo looks, and ives the figure quite a bit of range, which I certainly appreciate.

THE ME HALF OF THE EQUATION

When I was first getting into these guys, Piccolo’s original Anime color release was already kind of pricey, so I held off on him, but still kind of wanted one.  Last year, when All Time started carrying Dragon Stars, I thought about snagging that line’s version of Piccolo, but ultimately decided to wait for a chance at another Figuart.  So, when this guy came in, it was kind of hard to say no.  So…uhh…I didn’t?  He’s a really impressive figure, and probably the best I’ve picked up from this sub-line.   Definitely glad I snagged him.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#2706: Mace Windu

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

MACE WINDU

STAR WARS: THE BLACK SERIES (HASBRO)

“A grim Jedi Master with an amethyst-bladed lightsaber, Mace Windu was the champion of the Jedi Order, with little tolerance for the failings of the Senate, the arguments of politicians, or the opinions of rebellious Jedi.”

Mace Windu was one of the few not-hold-over-from-the-original-trilogy characters of the prequels to be of notable prominence, not just in one of the three films, but in the whole trilogy, even before Clone Wars came along and fleshed the others out a bit.  As such, he was also decently covered in the area of toys.  It came as a slight surprise when it took as long as it did for him to make his way into The Black Series, but he finally did, and I’m taking a look at that figure today.

THE FIGURE ITSELF

Mace Windu was an early 2019 release for The Black Series, released as part of the same assortment that included Padmé and Dryden Vos.  He was figure #82, placing him right between Padmé and the standard Battle Droid.  The Jedi all kept the same basic looks through the prequels, but Mace was even more consistent than the others.  This one serves as coverage for both his Episode II and III looks, since they were more or less the same.  The figure stands 6 1/4 inches tall and he has 29 points of articulation.  I’ve actually looked at most of Mace’s parts previously, when they were re-used for Plo Koon.  It was a good sculpt then, and it’s a good sculpt now.  It’s well constructed, and the articulation is quite nicely implemented.  He’s got all the range and motion of the newer Black Series offerings, so he’s a lot of fun to pose.  Obviously, the head and hands are different, so as to be more Mace-appropriate.  The head’s got a pretty darn solid Samuel L Jackson likeness, and probably one of the better likenesses from the line.  In general, the likenesses in this assortment were really strong, as I thought Dryden was up there as well. Also, I dig that the hands aren’t just two basic gripping poses; the left hand’s gesture pose has a lot of possible posing range to it.  Mace’s paint work is all pretty straight forward stuff.  The head has the face printing, which looks quite nice on this particular sculpt.  The robes and such are all basic work, but they’re up to snuff.  No noticeable slop or bleed over, so that’s good.  Mace is packed with his lightsaber and a removable cloth robe.  The saber is nice, but I was a little bummed that he couldn’t hang it from his belt.  The cloak’s about on par with the majority of the other cloth goods from the line, which is to say it’s not amazing, but it’s not terrible either.  It’s certainly better than the one that came with Plo.

THE ME HALF OF THE EQUATION

As I discussed in my review of Padmé, this assortment was the last one before All Time was carrying the line, so I missed out on most of them at retail.  I wanted a Mace to be sure, but just never had the opportunity to get my hands on him.  Fortunately, Hasbro did another production run on him and a handful of other figures, and they’ve just started to show up.  Mace is a really good figure, and certainly one of the line’s best Jedi figures.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2705: Clone Commander Fox

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CLONE COMMANDER FOX

STAR WARS: THE BLACK SERIES (HASBRO)

“Commander Fox led the Coruscant Guard, an elite clone trooper unit assigned to serve as peace-keepers on the Galactic Republic capital.”

With all of the new Archive releases covered (or substituted for the earlier release, as was the case for Cody), I guess I’ll fill this week out with a couple of older releases that I have on hand.  The photo at the end of yesterday’s review may have cued some readers into the fact that I have Clone Commander Fox, but I have not yet reviewed Clone Commander Fox, so I guess I might as well get on that.  How about this here Commander Fox figure?

THE FIGURE ITSELF

Clone Commander Fox was a shared retailed exclusive Black Series release from 2019.  Technically, he was a GameStop/Thinkgeek exclusive, but he was also offered up through Big Bad Toy Store, so he was rather thoroughly distributed.  Fox’s design follows the trend for all of the Clone Commanders’ designs so far, going for his Phase II design.  The figure stands 6 1/4 inches tall and he has 29 points of articulation.  Fox is built on the standard Clone Trooper body, for better or for worse.  That’s overall a good thing, but it does mean that he’s got some slight issues regarding range of motion on his joints, as well as the lack of a trigger finger on his left hand, for the purposes of dual wielding.  He’s got the adjusted belt with the holsters like we saw on Wolffe and Rex, along with a cloth kama piece to match.  The kama still seems a little short, no doubt due to using the same pattern as the other two.  Fox gets a new helmet piece, which is rather similar to Cody’s but lacks a couple of Cody’s specific details.  The standard portions of the helmet match up in style with Cody’s helmet, indicating that they at least started from a common point.  The visor, which is a separate piece on both, is a notably softer plastic here, which causes it to be slightly warped on my copy of the figure.  It’s not terribly so, but it’s noticeable.  Fox’s paint work is pretty nicely handled.  The base work is pretty clean, and the predominantly red coloring helps him stand out.  There’s a lot of fun detail work going on, with some notable wear and tear on his armor.  It gives him a realistic vibe, which works pretty well.  Fox is armed with a DC-15A long rifle and a pair of DC-17 pistols.

THE ME HALF OF THE EQUATION

I’ve pretty much thrown in the towel on resisting getting any of the Clone Commanders, so I knew I wanted Fox as soon as he was shown off.  That being said, it being Fox, I wasn’t in a major rush or anything.  I actually wound up picking him up from an All Time trade-in, back before I even got yesterday’s Cody figure.  I just kept putting off reviewing him because, you know, life, and all.  But, I figured, with Cody finally getting reviewed, I might as well clear out all of the Clone reviews on deck.  Fox isn’t the most impressive of the Clones, but he’s got a distinctive look, and now I’ve got a red one, so that’s cool.

#2703: Han Solo – Hoth

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

HAN SOLO — HOTH

STAR WARS: THE BLACK SERIES ARCHIVE (HASBRO)

“Han stuck with the Rebel Alliance and helped establish its new base on the ice planet Hoth. After Luke didn’t return from a routine sweep of the planet surface, Han headed out alone into the frigid cold to find him.”

Luke wasn’t the only one to get the deluxe Hoth cold-gear treatment for The Black Series in 2015, and he’s likewise not the only one to get the Archive treatment in 2021.  Both times around, Luke was accompanied by his good buddy Han, in his own set of cold-weather gear.  And I’m taking a look at that Han figure today!

THE FIGURE ITSELF

Han is another figure in the third assortment of Star Wars: The Black Series Archive.  Like Luke, he too was originally released in a deluxe set in 2015, where he was originally packaged alongside a Tauntaun.  Unlike Luke, he’s one one release between these two; the figure got a head swap and was packed with Hoth Leia for a two-pack in 2018.  The figure stands 6 1/4 inches tall and he has 25 points of articulation.  Han’s articulation scheme is rather similar to Luke’s, being a rather archaic offering compared to other figures.  The mid-torso joint works a bit better on this guy than on Luke, at least, but otherwise, it’s pretty much the same, right down to the cut joints for the wrists.  Han’s sculpt is a straight re-use again.  It’s not the worst sculpt, but it’s far from one of Hasbro’s best.  The actual body’s not bad; the details are a bit sharper than Luke’s, and the proportions aren’t quite as off.  The real issues have to do with the head.  Firstly, like a number of the Han heads, it sits too high on the neck joint.  The actual head is actually made up of three separate pieces, for the head/hat, the hood, and the goggles.  This is accurate to the film, and gives the sculpt some extra depth, but introduces its own set of problems.  The main head is rather under-scaled when compared to the rest of the body, presumably to compensate for all of the other parts.  The face has an okay likeness of Ford, at least.  The hood and goggles are decent pieces in their own right, but in the case of the hood, designing it to be removable costs the aesthetics a bit.  There’s a rather noticeable seam on the back of the hood where it’s designed for removing, and due to the head sitting as high on the neck as it does, it doesn’t actually sit flush with the rest of the coat.  Since it’s, you know, supposed to be the same garment, and all, that’s kind of a big deal.  With careful posing, it doesn’t look quite as bad, but it’s still off from every angle no matter what.  It all winds up being a rather silly venture anyway, since there’s no reason to actually remove the hood, since it’s not a look that’s ever seen in the movie, and it really just ends up looking goofy.  Without an alternate head, or a hood piece pulled down, there’s no practical reason for the hood to be a removable piece.  He’d be better off with the hood permanently attached.  The figure’s paint work is a notable change-up from the original release.  In addition to getting the face printing to differentiate him from the original release, this figure also takes the opportunity to correct the jacket’s color from the blue of the original release to the proper brown.  The 2018 release made this change too, but this is the first time we’ve gotten the hood in the right color.  Han is packed with his usual blaster pistol.  It’s a little light, but it’s consistent with what he originally had (minus the Tauntaun, of course).

THE ME HALF OF THE EQUATION

Han’s original release was the same deal as Luke, being more difficult to find, lower quality, and just a bit too expensive at the time.  I did *almost* get one during Amazon’s first Prime Day, when he went on sale, for something silly like $5 off, but, again, it was hard to make it worth my time.  I mostly snagged him because I was getting Luke.  Honestly, he’s not as good as the already rather mediocre Luke figure.  The hood and head is a huge issue, and in general, he’s just not a terribly fun figure to mess with.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2702: Luke Skywalker – Hoth

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

LUKE SKYWALKER — HOTH

STAR WARS: THE BLACK SERIES ARCHIVE (HASBRO)

“While on patrol, Luke and his tauntaun are attacked by a vicious wampa. The creature hangs Luke upside-down in its cave, but Luke uses the Force to escape.”

Luke has been no stranger to variants in Star Wars: The Black Series.  As a rather major character in the franchise, I guess that’s pretty fitting.  His major variants largely hit earlier in the line’s run, generally a good deal before the rest of the others in their matching attire.  That has a tendency to drive the prices of said matching looks up a bit.  Fortunately, with the introduction of the Archive sub-line, Hasbro’s got an okay way of getting them back out on the market.  One of the more notable looks that gone without a follow-up was Luke’s cold weather gear from Hoth, which is the Luke variant for the latest round of Archive figures.

THE FIGURE ITSELF

Luke is from the third assortment of The Black Series Archive, re-releasing a figure that was originally put out in 2015, packaged alongside the Wampa in the deluxe portion of the Blue Line iteration of the brand.  The figure stands about 5 3/4 inches tall and he has 25 points of articulation.  Luke’s articulation scheme is rather on the archaic side compared to newer offerings.  The range on a lot of the joints is far more restricted, and they tend to break up the sculpt a lot more than on recent figures.  The arms in particular suffer from both a lack of proper elbow movement, and from a curious lack of anything beyond cut joints for the wrists, which is just unheard of for the line.  A lot of this is due to the figure’s nature, beign built out of parts that are over five years old at this point.  Moreover, Luke is unfortunately from the line when it was kind of at is lowest, before Hasbro really found their footing again.  It’s rough to say the least.  The actual sculpting work’s not awful, at least.  Luke’s seen here post-wampa attach, so his goggles are missing, and he’s got some sculpted scarring on his face.  The face has a pretty decent likeness of Hamill, especially for earlier in the line.  The detail work on the gear is passable, though a touch softer than more recent releases tend to be. His head scarf is a cloth piece this way, which works better from a posing stand point, though it does wind up looking a bit flat and devoid of detail.  Luke’s paint work is generally pretty basic.  It could probably stand to have a little extra accent work, to bring out some of the sculpted details a little better, bit everything important is there.  There’s some slop on the edges of a few spots.  The belt buckle’s slightly misaligned and the skin tone of the the neck doesn’t quite cover the whole area it’s supposed to.  Luke gets the face print set-up in place of the original paint scheme, which is in some ways better, but not quite as hefty an improvement as it usually is.  Notably, it misses out on the blood detailing for the scarring, which was on the prior release.  Additionally, the eyes just don’t look quite right.  At first, I thought I just got a misaligned copy, but all of the ones I looked at were the same, so it looks to be line-wide.  It looks alright from a distance, but up close it looks weird.  In terms of pack-ins, Luke is obviously without the Wampa he was originally packed with, but he gets the lightsaber and blaster from the prior release.  The blaster’s pretty decent, but the lightsaber is of a notably lower quality than other versions; the hilt is molded in silver rather than painted, and the whole thing is a softer plastic than usual, causing the blade to pop out a lot easier.

THE ME HALF OF THE EQUATION

Luke’s original release marked the period when the line was hardest to fine and generally at its lowest quality, which made it rather hard to stay invested at the time.  That, coupled with the higher Deluxe price point had me steer clear of this guy the first time around.  With all of the other Hoth figures as of late, I’d been hoping for an update or something.  Here’s an “or something”, I guess.  Given the era of the line this sculpt comes from, it’s about what I’d expected.  The articulation’s not ideal, and the sculpt could probably stand to be a little sharper.  In general, he just feels sort of half-formed.  The new paint does a little bit to dress him up, but ultimately, it feels out of place in the modern line.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2701: Silver Centurion

Posted by Ethan Wilson in Reviews and tagged with , , , ,

SILVER CENTURION

MARVEL MINIMATES

Con exclusives and Minimates have been pretty heavily linked since the line’s inception.  In the first year of Marvel Minimates, Diamond used these exclusives to fill out the line-up of characters a touch further, and this would continue into the line’s second year.  Though absent from the line entirely in its first year, Iron Man was the recipient not only of a main line release, and a variant, but also his own exclusive two-pack, which I’m taking a look at half of today!

THE FIGURE ITSELF

Silver Centurion (as he’s dubbed on the box; he’s not actually named Iron Man there) was part of the Marvel Minimates exclusive pack from Wizard World Chicago in 2004.  That meant that he hit roughly a month after the first Iron Man arrived in Series 6 of the line.  The figure was built on the standard C3 mate body, pre-peg hole on the head, so he stands about 2 1/4 inches tall and has 14 points of articulation.  He has add-on pieces for his helmet, shoulder armor, belt, and gloves.  All of these parts would remain unique to this particular figure, which was actually pretty rare for these earlier figures.  They’re not a bad assortment of pieces, although the helmet was plagued by an issue of being slightly too short for the head.  Interestingly, the updated Silver Centurion from Series 36 had a similar issue, despite the two parts being different tooling.  Ultimately, it’s not the worst thing in the world, and in most poses, the shortness isn’t too noticeable.  The paint work on this guy is pretty involved; it follows the trend they’d started with the standard Iron Man, who likewise was a step-up from other ‘mates at the time.  It kind of informed how they’d go about a lot of ‘mates in the coming years, with a lot more individual details.  The only part that could stand to be changed is the mouth, which doesn’t get the black detailing like the eyes, which makes it look slightly off.  Still, it looks pretty solid.  Under his helmet, there’s a fully detailed Tony Stark head.  It’s screaming, which is a different sort of expression, but not a bad change up given that it was our fourth Stark head that year.  Silver Centurion was without any accessories.  Flight stands weren’t a thing yet, but the lack of an alternate hair piece for display without the helmet’s a bit of a bummer.

THE ME HALF OF THE EQUATION

I wasn’t really on the up-and-up with convention exclusives at this point in the line, so I didn’t get either Silver Centurion or his pack-mate Classic Iron Man when they were new.  I always wanted them, but just never got around to getting them.  Classic got redecoed into gold for the Avengers boxed set, and there was the updated Silver Centurion, so I felt less of need to get them after that.  However, when that big Minimates collection came through All Time in 2019, this guy was in there, so I went ahead and grabbed him.  He’s not a bad little figure all things considered.