Tag Archives: Black Widow

#0235: Black Widow & Falcon

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BLACK WIDOW & FALCON

MARVEL MINIMATES

Widow&Falcon

Okay, so I already went through my immense excitement at the existence of Captain America: The Winter Soldier Minimates yesterday. I shan’t subject you to that again. I’m still really excited, but I’m keeping my composure. Promise. Today, I’ll be looking at Cap’s two most trusted allies in the film, and the biggest push for me to get the Minimates: Black Widow and Falcon!

THE FIGURES THEMSELVES

Widow and Falcon were released as part of Marvel Minimates Series 55, which was released as a tie-in series for Captain America: The Winter Soldier.

BLACK WIDOW

Widow

Black Widow is built on the standard Minimate body. This means she features 14 points of articulation and stands about 2 ½ inches tall. She’s presented here in her SHIELD jumpsuit look that she sports early in the film and in the final act. I was actually a bit surprised by how little she has this look, but it’s definitely the one to go for if you’re doing an action figure. She features six sculpted add-ons: hair, belt, two holsters, and two widow’s stingers. The holsters where originally used on the Avengers movie version of Widow, but I believe everything else is new to this figure. I was actually a bit surprised to see a new sculpt for the stingers, but I guess they thought they could use an update. The new pieces all look pretty great, with nice detail work and a decent amount of accuracy to the movie. The paint on Widow is pretty great. The detail lines are all really sharp, and the base paint is better here than it was on Cap. I did notice some slight bleed over from the whites of her eyes, but it’s actually not too bad, and it’s hardly noticeable. I also love the fact that they’ve given her a more “battle-ready” facial expression, as opposed to the more vacant expression a lot of female figures get. It really adds some character. Widow includes two hand guns and a clear display stand.

FALCON

FalconLike Widow, Falcon is built on the standard Minimate body, so he has the usual height and articulation. Falcon is based on the character’s look during the final act of the film. It’s the character’s true “Falcon” look, so it’s a good choice. He features eight sculpted add-ons: goggles, gloves, a jetpack/harness, two shoulder pad/upper wing pieces, and two lower wing pieces. With the exception of the gloves, which were previously seen on the Age of Ultron Nick Fury, all the pieces are brand new to Falcon. They all look pretty great, and are very accurate to the source material. I’ve seen a few complaints that the harness is too bulky, but the harness from the movie looks pretty bulky to me, so that seems about right. The paint work on Falcon is overall great, with one exception. While he head has a great likeness to actor Anthony Mackie, my figure has a clump of dried paint right on his forehead. Once the goggles are in place, it’s mostly unnoticeable, but it’s still kind of annoying. The rest of the paint work is really great, especially the camo work on his pants. Falcon includes two handguns (different from Widow’s), a flight stand, and a clear display stand.

THE ME HALF OF THE EQUATION

Just like with Cap and Winter Soldier, I was out of town for the release of this series. My dad was nice enough to pick them up for me, which was super awesome of him. I was a little let down by the Cap in the Cap & Winter Soldier set, so I wasn’t sure how the rest of the wave would turn out. I’m happy to say that neither of the figures in this set suffer from the same issues as Cap. That’s very important to me, because having these two particular characters in the same scale is what had me so excited for the Minimates to begin with. These two certainly did not disappoint!

#0222: Black Widow

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

BLACK WIDOW

MARVEL LEGENDS INFINITE SERIES

BlackWidow2(Long)

Toy companies have long insisted that female action figures don’t sell as well as male action figures. So, their response to fan demand is usually one of two things: they shortpack the figure, making it impossible to find, or they put no effort into the figure, making it a monstrosity nobody wants. Or they do both (case in point: Marvel Legends Scarlet Witch. Eughhh…). These actions lead to female figures not selling as well, which leads to companies saying they don’t sell well, which leads to shortpacking and poor figures. Which leads to, you guessed it, bad sales. It’s one of those self-fulfilling prophecy things.

Anyway, this mentality lead to Black Widow being the only team member absent from Hasbro’s 6-inch scale Avengers line, meant to tie-in with the 2012 movie. It was really annoying, but Hasbro said they’d make it up to us. When the Captain America: The Winter Soldier figures were announced, they informed us that Widow would be including two heads, so she could be displayed from either movie. How could it go wrong? Well, Hasbro decided to pack Widow one per-case. For a ratio, there are eight figures in a case, and three of them are Captain America. To make matters worse, Widow included the most essential piece to the line’s Mandroid Build-A-Figure. Fortunately, Hasbro seems to be learning, and has announced that they will be sending out revision cases with Cap, Widow, and Winter Soldier all evenly packed. Maybe their starting to get it…

THE FIGURE ITSELF

Black Widow was released in the second series of Captain America: The Winter Soldier Marvel Legends Infinite Series. The figure stands a little under 6 inches tall and has 24 points of articulation. She’s actually a bit too tall, which is the reverse of the problem that most female figures suffer from. It doesn’t ruin the figure, but she’s almost as tall as Cap, and there’s a difference of almost a foot between Scarlet Johansen and Chris Evans in real life. The figure appears to have a brand new sculpt, and it’s a very nice sculpt at that. I’m not sure if I like the body sculpt quite as much as Hasbro’s Spider-Girl sculpt, but it’s a very close second. Like that figure, she has very nice, mostly realistic proportions. Her stance is perhaps a bit too wide, but other than that, everything looks pretty good. The basic TWS head is a great sculpt, and it looks pretty much spot on to what Ms. Johansen looked like in the movie. The long hair is a little bit restricting to the neck articulation, but that’s understandable given the style. It certainly isn’t as bad as it could have been. In the paint department, Black Widow lucks out compared to the previous two figures I’ve looked at. There’s still a bit of bleed over in a few spots, but she seems to have less of the fuzzy lines and slop of the other two. She includes an extra Avengers-styled head, an extra set of trigger finger hands, and the Mandroid torso. The head is a nice touch, given Widow’s absence from the 6-inch Avengers line and the closeness of the costumes. It looks like the same face with new hair, and it looks pretty good, though the hair might be sitting a smidge too high on her forehead.Widow also includes two pistols…sculpted into their holsters. Remember how I said she had trigger fingers? Yeah, she has nothing to hold in them. It’s seriously disappointing and mars an otherwise great figure.

BlackWidow3(Long)  BlackWidow1(Short) BlackWidow(Short)

THE ME HALF OF THE EQUATION

Widow was part of my set of Series Two figures from Big Bad Toystore. She is the primary reason I bought the set, as I wasn’t going to fork over almost $60 for just her. She definitely lives up to the hype she’s gotten. It’s a great representation of Widow. She’s a great action figure in general. This is the second Hasbro female I’ve given that assessment is the last week. They’re definitely on to something here! However, the figure is hurt by the lack of firearms. I ended up finding a suitable handgun in my spare parts bin, but not everyone has a spare parts bin.

CapTrio

#0057: Hawkeye & Black Widow

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

HAWKEYE & BLACK WIDOW

MARVEL MINIMATES

Today, it’s another entry from the Marvel Minimates line.  The two are once again from the recently acquired Toys R Us Exclusive series.  This time around, its Hawkeye and Black Widow, two characters who received a lot of notoriety from last year’s film The Avengers.

THE FIGURES THEMSELVES

These two were released as part of the 17th Toys R Us exclusive series of Marvel Minimates.

HAWKEYE

First up, it’s nobody’s favorite Avenger, Hawkeye (okay, that’s not true.  He’s actually one of my favorites)!  Hawkeye is depicted here in his most recent costume, prominently featured in his current solo series.  I follows the tradition of changing a character’s look to be more in line with their movie look of which Marvel’s grown so fond.  It’s not a terrible look, and it translated well, so no complaints here.  Hawkeye’s built on the basic Minimate body, so he stands about 2 ½ inches tall and has 14 points of articulation.  He’s got a fair deal of sculpted bits, including:  hair, gloves, utility harness with a quiver, a belt, and leg bands.  The hair, belt, leg bands and harness are reused from previous figures, but they are chosen well, so no issues there.  The quiver and gloves appear to be new.  The quiver looks appropriate to the character, and the gloves are a might in the bulky side, but not too bad.  The paint on the figure is a bit hit and miss, the face looks perfect for the version of the character they’re going for, and the change in finish to designate the boots looks cool, but places like the edges of his sleeves are rather fuzzy.  It’s not enough to ruin the figure, but it’s annoying.  Hawkeye is topped off by a bow, three arrows, and the now standard clear display stand.  These pieces are all reused, but if it works, it works.

BLACK WIDOW

Second, it’s the best former Soviet spy turned kick-ass Avenger Marvel’s got: Black Widow!  Widow’s rocked the black skintight catsuit quite a few times over the years, but this figure is based on the look she has currently in particular.  It’s a look that’s lasted for so many years for a good reason, so its use here sees no complaining from me.  Like Hawkeye, she’s on the typical Minimate body, so she has 14 points of articulation and stands about 2 ½ inches tall.  She features sculpted hair, wrist bands, and leg holsters.  The pieces are all reused, but they all work appropriately for the desired look.  The paint on Widow is a bit better than Hawkeye, though there is a tiny bit of slop on her neckline.  Widow includes two silver handguns and a clear display stand.

THE ME HALF OF THE EQUATION

Like the rest of this series, these two were gotten off of TRU’s website, with no real issues this time around.  I’m really glad because these two are definitely the set from the series I was looking forward to the most.  These two definitely didn’t disappoint.  Widow is a grate update to her traditional look, and while Hawkeye’s not my favorite of his looks, the Minimate is really well done.