Tag Archives: Captain America

#0429: Infinity Minimates

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

SPACE SUIT CAPTAIN AMERICA, ARMORED HULK, INFINITY THANOS, & THANE

MARVEL MINIMATES

Marvel Minimates is really just the line that keeps on giving. I have a pretty substantial back log of figures I already had before the site was started, so they were already going to show up a lot. However, they also provide new releases on a very regular basis. Which makes for even more frequent reviews. Yay.

Marvel Minimates is also one of the few Minimates lines to be fairly consistently supported by Toys R Us. TRU has carried 18 of their own exclusive series of the line. In addition, they’ve offered fans the opportunity to influence the line a bit with Fan’s Choice boxed sets based on certain events. Today, I’ll be looking at the most recent of those sets, based on last year’s Infinity cross-over. Full disclosure: I haven’t read any of Infinity, so I can’t really speak to any story specific stuff. I know the general gist of it, and I know who the one storyline specific figure in this set is.

THE FIGURES THEMSELVES

These four were released as part of a Toys R Us exclusive four-pack. The line-up was chosen via a poll on Toys R Us’s website. There were two other figures, Ronan the Accuser and Space Suit Iron Man, who did not make the cut for this set, but will be appearing in the TRU Series 19.

SPACE SUIT CAPTAIN AMERICA

There have been a fair number of Captain America ‘mates, especially recently, but this is the first time he’s been space worthy. It’s also the third ‘mate based on Cap’s Marvel Now! appearance. Cap’s clearly the “safe” figure in this set, but that’s not necessarily a bad thing. The figure is about 2 ½ inches tall and he sports 14 points of articulation. He’s based on Cap’s space-faring look from Infinity, which I understand is the look he had for most of the story. It’s basically just a tweak on his regular Now! design and it looks pretty good. The figure makes use of the standard Minimate body, with non-standard upper arms and hands, as well as add-ons for his helmet and space-y web gear. The hands and helmet hail from the previous two Now! Caps, which is a sensible re-use. They’re well-sculpted pieces that are accurate to the source material, so it’s a win-win. The upper arms originally appeared on the Series 49 Mark 42. They aren’t quite as warranted as the hands and helmet, but they’re reasonable enough as a generic set of tech-y arms. The web gear is the only really new piece present. It’s well enough sculpted, and it seems to be pretty accurate to the source material. It’s not the most exciting piece, but it does its job. Cap’s paint work is pretty decent. For the most part, everything is clean, and the details are sharp. However, the paint on the helmet/head is applied in such a way that is impossible for me to get the helmet off his head, which is rather annoying. Cap includes his mighty shield and a hand wield said shield (both reused from the previous Now! figures), as well as a hair piece (also from the Now! Cap), and a clear display stand. The shield is a bit sloppy paint-wise, and the hair is ultimately not very useful due to the issues with the helmet.

ARMORED HULK

Hulk here is a bit less space-ready than the Cap figure. As the name implies, he’s just an armored version of the character. The figure is over 2 ½ inches tall, closer to the 3 inch mark, and he features 12 points of articulation. He’s based on the character’s Now! look. This is the second Minimate based on the look, but the first one was more armor-lite. This is what the character’s looked like for most of the Now! run. The figure is built on the basic Minimate body, with non-standard pieces for the hands and feet, as well as add-ons for the hair, torso, upper arms, waist, torso extender, and upper legs. The hair and upper arms first cropped up on the Series 41 Mega Rage Hulk, the feet first appeared on TRU’s Hulk as Nul, the hands are from the Hulk TTA Maestro, and the torso extender, waist cover, and upper legs are from the TRU 16 Now! Hulk. The chest piece is the only truly new part, however it’s nicely handled. The reused pieces are used a such a way that it wasn’t immediately obvious that the torso was the only new part, which is a sign of good re-use. The shift from sculpted detail lines on the armor on the torso and upper legs to painted on the feet is a little bit jarring at first, but it’s not too bad. Hulk’s paint alright, but it could be better. There’s some bleed over on the transitions from armor to skin, and there’s some pretty bad slop on the back of the figure’s head and torso. The figure also suffers from the same stuck pieces that plagued Cap, something that is a common theme in this set. Hulk includes a clear display stand.

INFINITY THANOS

Thanos here is probably the biggest draw of this set. This is the third version of Thanos in the Marvel Minimates line, but it’s been five years since his last figure. If you’re a faithful follower of my reviews, you’ll recall I didn’t think the last one was very good. Plus, he’s set to be a major player in the Marvel Cinematic Universe in the next few years, so it’s really good timing. Thanos is the largest ‘mate in the set, coming in at just shy of 3 inches tall, and he has 12 points of articulation. He’s based on Thanos’s recent redesign from Infinity. It’s not far off from his original design, but there are a few differences in the execution of some of the details. Thanos uses the basic Minimate body as a starting point, with non-standard hands and feet, as well as add-ons for his helmet, torso, upper arms, waist, torso extender, and upper legs. The upper arms and legs are from the Series 41 Hulk, the extender is from the TRU 16 Hulk, and the waist cover is from a whole bunch of Minimates (I’m not sure who used it first). The helmet, torso cover, hands, and feet are new to Thanos, and they’re pretty good overall. The torso is probably the best piece. It has a lot of ornate detail work that looks really good. The hands and feet are decent, though they seem a little too rounded. The helmet is good in theory, but not quite in practice. It’s well sculpted, but it sits too low on the head, which obscures a lot of the details on the face. Thanos’s paintwork is pretty clean overall. There are a few spots with some bleed over, but most of it’s pretty sharp. The face in particular looks really good, and it definitely improves on the last one. Unfortunately, Thanos was not exempt from the stuck paint issues. His helmet was practically glued on when I got him and took quite a bit of effort to remove. Thanos includes a clear display stand. It would have been nice to get an Infinity Gauntlet that matched this figure, but since it wasn’t in the story, I can understand its absence here.

THANE

Hooo boy, Thane. This guy. So, Thane is the one new character in the set. He’s also new to the storyline, and he has a sort of important role, so I guess his inclusion makes sense. In case you were unaware, Thane is Thanos’s son and he’s half Inhuman, which sort of makes him a bit of a mess. The figure is about 2 ½ inches tall and has 14 points of articulation. Thane is based on the character’s appearance post-Terrigen Mist exposure, which is notably Thanos-inspired. It’s an okay design, though not particularly thrilling. The figure is mostly a “vanilla ‘mate” with his only unique piece being his left hand. This piece is re-used from the DC Minimates Series 6 Cheetah figure. It’s a pretty standard clawed-hand, so that’s good. The rest of Thane’s detail is done with paint. For better or worse, Thane exhibits the best paintwork of the lot. The base colors are clean and even, the colors are pretty bold, and the detail lines are nice and sharp. Thane didn’t have any issues with stuck pieced due to paint, although that’s likely due to his lack of add-ons. The figure includes a clear display stand.

THE ME HALF OF THE EQUATION

I found this set while killing some time during one of my brother’s rehearsals. Obviously, I got it from Toys R Us, it being an exclusive and all. I did participate in the vote on this one, and three of the four I voted for are in the final set, so I guess that’s cool. Unfortunately, Ronan, the one I wanted the most, lost out to Thane, which is a bummer. Guess I’ll have to wait for TRU 19. All in all it’s a pretty good set. Cap and Hulk are fun variants and Thanos offers some nice improvements to the last one. Thane is good on a technical level, but sadly neither the character nor his design is particularly exciting.  But hey, three out of four ain’t bad!

#0414: Ms. Marvel, Captain America, & Radioactive Man

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , , ,

MS. MARVEL, CAPTAIN AMERICA, & RADIOACTIVE MAN

MARVEL LEGENDS INFINITE SERIES

Okay, last day of Marvel Legends reviews this round. But, we’re going out with a bang. Not one, not two, but THREE (count ‘em THREE!) figures this time. Target is doing something of a push for more business in their action figure department, so they’ve just started carrying exclusive sets from Hasbro’s Marvel Legends Infinite Series and Star Wars: the Black Series lines, as well as Playmates’ Teenage Mutant Ninja Turtles line. I just got the Marvel set, so let’s see how that turned out.

THE FIGURES THEMSELVES

Ms. Marvel, Captain America, and Radioactive Man are part of the exclusive Marvel Legends Infinite Series three-pack currently for sale at Target. Radioactive Man was previously slated for a regular release in the Marvel Legends line before the move to the Infinite Series branding, but he ended up getting cancelled. It’s nice to see him find a place here.

MS. MARVEL

“When her human DNA fused with that of the mighty Kree warrior Mar-Vell, Carol Danvers became the superhuman Ms. Marvel.” This is the star attraction of the set for a lot of people. It’s understandable, given that the character hasn’t seen a figure in this scale since way back in the Toybiz days. That’s a pretty dated figure, and near impossible to find, at that, so a new figure is a great move. The figure is about 6 inches tall and she features 29 points of articulation. She’s depicted here in her second costume, designed by the late Dave Cockrum. It’s generally the design she’s most associated with, and it’s probably one of the better ones. Ms. Marvel’s sculpt is head-to-toe identical to that of the Moonstone figure from the Thunderbolts boxed set. Generally, a complete re-use for a separate character doesn’t work out for the best, but Ms. Marvel and Moonstone have generally been rather similar in looks, so a little bit of paint is enough to make it work. It’s a pretty solid sculpt, with good proportions and movement. In addition to the Moonstone pieces, Ms. Marvel’s also been given a sash add-on, which actually does a nice job hiding the flatness of the lower torso. That was the only real issue with the original sculpt, so it makes the figure even better. The paintwork is, obviously, key on this figure, and for once Hasbro really made it work. Everything is really clean, and all the details are nice and sharp. The gold on the logo in particular looks really nice. About the only issue with the paint is the decision to have the exposed skin go up quite so high on the hips. If the costume came down a bit further, the articulation would be pretty well hidden, but as it is they look a bit unsightly. Ms. Marvel included no accessories, but apart from maybe an energy blast or something, there’s not much that would make sense.

CAPTAIN AMERICA

“Science made Steve Rogers a super-soldier with extraordinary speed, agility, strength, and durability, but it’s his heart that makes him Captain America.” Cap here is kind of the requisite heavy hitter of the set. It’s highly unlikely he’ll have much pull for the set’s intended audience, but he’s kind of unavoidable. The figure is about 6 inches tall and he has 32 points of articulation. He’s something of an amalgam of Cap’s various looks over the years. The strongest influence seems to be from the Ultimate universe version of the character, but the color palate is more classically inspired, and the painted on head wings are from the most recent incarnations of the costume. The end result is actually not bad. Like the design, the figure’s pieces are also something of an amalgam of previous figures. Most of the figure is re-used from the most recent Ultimate Cap (Which it should be noted took a lot of its parts from the ML Face-Off version of Punisher). The only pieces not from that figure are the right thigh, which is from the X-Men Marvel Legends Infinite Series Magneto, and the shoulder strap, which is from the ML Commander Rogers figure. The body is a little dated in comparison to some of the more recent stuff, but it’s not terrible. The add-on shoulder strap and belt pieces do a lot to mask some of the flaws, allowing it to serve as a decent mid-way point between the body like we saw on Carnage and the one used for Radioactive Man. I’m still not 100% sold on the head, but it could be worse. It’s just a bit too mean looking. The figure’s paint is pretty solid. Everything is pretty clean. I dig the boldness of the blue. The stars on the shoulders present a bit of an issue with posing, as moving the shoulders causes them to be a bit misaligned. Cap includes his mighty shield and an extra unmasked head. The shield is the same one we’ve seen a few times. It’s a good piece, plus it can be placed on his back, which is cool. The head is a re-use from Commander Rogers. It has a lot of the same issues as the regular head, but at least it matches.

RADIOACTIVE MAN

“A nuclear physicist with his eye on taking over the world, Dr. Chen Lu transformed himself into the walking atomic meltdown known as Radioactive Man.” Not to be confused with the Simpsons character of the same name. Radioactive Man is probably one of the primary reasons for this set’s existence, since I imagine Hasbro didn’t want the sculpt going to waste. The figure is about 6 ½ inches tall and he features 32 points of articulation. He’s based on Radioactive Man’s classic appearance, which is one of my favorites, as goofy as it is. Radioactive Man’s a big guy, and as such he’s built on Hasbro’s new bulky body, which I believe was first used for Hyperion. It’s a pretty good body, especially for larger characters, although the neck might be just a tad too far back. Still, it’s well-proportioned and poses well. Not much else you can ask for. Radioactive Man’s also got a brand new head and an add-on piece for his, uh, skirt. The head is pretty decent, though Hasbro’s male heads are starting to look a bit repetitive. Too many similar features, I guess. The skirt piece is nice, though it can end up being a bit restricting in some poses. Radioactive Man’s paint is pretty decent, if a bit sparse. For the most part he’s molded in translucent green, which is definitely cool. The skirt and boots are molded in s darker, solid green, and the torso’s painted to match. The logo on the chest is clean, which is good. I would have liked it to be more of a yellow, but it looks fine. The only other details are his eyes, which are just simple white. Unfortunately, the left eye on mine is out of place, but it’s not too noticeable. Radioactive Man includes no accessories.

THE ME HALF OF THE EQUATION

Unsurprising for a set that is exclusive to the store, I picked these three up from Target. My brother and I had gone to pick up Lego Batman 3 (which is awesome by the way), and I happened to find this set as well. As luck would have it, I had exactly the right amount of cash on hand to get both. Sure, I don’t really need another Captain America, but this one’s inoffensive and the other two more than make the purchase worth it. Plus, Radioactive Man. How can you say no to Radioactive Man? You just can’t!

#0385: Spider-Man – Spider Sense & Captain America – Marvel Now

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SPIDER-MAN – SPIDER SENSE & CAPTAIN AMERICA – MARVEL NOW

MARVEL MINIMATES

The point of the Best Of Marvel Minimates line is to keep basic versions of Marvel’s heavy hitters in circulation. However, Marvel’s characters, more so than DC’s, have a tendency to change up their designs, leaving a few different options as to what is their “basic” look. So, Diamond Select Toys has decided to take advantage of this to have a few more A-List figures in the line. Today’s set, Spider-Man and Captain America, are a prime example of this.

THE FIGURES THEMSELVES

These two were released as a two-pack in the third series of the Best Of sub-set of Marvel Minimates. Both figures in this set are the second version of their respective characters in the Best Of line.

SPIDER-MAN – SPIDER SENSE

Spider-Man is arguably Marvel’s best known hero, so it’s not surprising to see him pop up again. One of the things about Spider-Man is that, while he’s pretty much had the same costume for most of his career, there’s been a fair number of minor tweaks and stylistic choices by different artists. The Spider-Man released in Best Of Series 1 was based on Spider-Man’s “classic” look, in the vein of artists such as John Buscema and John Romita Sr. This figure is decidedly more modern, taking its influence from Todd McFarlane’s version of the character. The figure is roughly 2 ½ inches tall and features 14 points of articulation. The figure uses the basic Minimate body, with one addition: his spider sense piece. The piece was previously seen on the Spider-Sense Spider-Man in the 13th TRU exclusive series. It’s a decent approximation of the effect used in the comic (though my girlfriend says it makes it look like his head’s on fire), and it’s fairly well sculpted. Unfortunately, once it’s removed, Spidey is left with a hole in the top of his head. Not too much of an issue for long term collectors with dozens of Spider-Man heads to choose from, but certainly an issue for someone who gets this as their first Spidey. Like so many Spider-Man Minimates, this figure is basically a “vanilla ‘mate,” so paint is key. Spidey’s paint is okay, but not quite as good as the rest of the series. The red is a little uneven in places, and the web patterns are out of place and bunched up in a few areas. Also, the web pattern abruptly stops on the sides and backs of the wrists, legs and belt, which, while obviously intentional, is a shame. Spider-Man includes an extra head and hair (first used on Series 51’s Nova), a webline, a jumping stand, and a clear display stand.

CAPTAIN AMERICA – MARVEL NOW

Captain America’s pretty consistently had the same look over the years, but in light of the success of the movies, he’s gotten a little bit of a redesign to bring him a bit more in line with that look. The result is the Marvel Now look, which has gotten a few toys recently. This is the second time this look has been seen in Minimate form, with the first being in the 16th TRU exclusive series. The figure is about 2 ½ inches in height and features 14 points of articulation. Cap uses the standard body, with additional pieces for his helmet, gloves, and belt. All of these pieces are re-used from the first Marvel Now Cap. They were pretty great pieces there, and they’re pretty great pieces here. If there’s one thing to be said about the new costume, it’s that it translates really well to the Minimate style. The figure’s paint is fantastic. Everything is clean and evenly applied. They’ve used a lighter blue than what was used on the TRU 16 figure, and it really helps the figure pop. The detail lines are all really nicely handled, and the design has been translated expertly. The face is interesting; I like it, and I think it’s a great Cap face, but the expression seems like something that would be at home on a more classic version of the character. Still, it’s nice to get a happy expression from time to time. Cap includes his mighty shield (From the Series 40 Cap), an extra non-shield holding hand, a spare hair piece (shared by TRU 16’s Cap and Hulk), and a clear display stand.

THE ME HALF OF THE EQUATION

Spidey and Cap were picked up from Cosmic Comix, my local comicbook store. I hadn’t really planned on getting this set initially. I have plenty of Spider-Men, and I was perfectly content with the TRU 16 version of this Cap costume. However, seeing them in person, they called to me. A more modern Spider-Man’s not a bad thing to have, and the brighter palate on Cap further improves a figure I was already a pretty big fan of. Sure, these aren’t going to be for everyone, and I hope that the Best Of line doesn’t skew to modern, but this is a fun set.

#0256: Captain America

Posted by Ethan Wilson in Reviews and tagged with , , ,

CAPTAIN AMERICA

MARVEL SELECT

CaptainAmerica

Happy Fourth of July everybody! For most of my non-American readers it’s just a day in July, but for those of us in the US, it’s a day in July where we grill stuff and then watch stuff explode! Oh, and something about independence or some such. I think they might have mentioned it once in school, but I wasn’t paying attention.

Anyway, what better way is there to celebrate an American holiday than with the Sentinel of Liberty himself, Captain America!

THE FIGURE ITSELF

Cap was released as one of the first Marvel Select figures offered through the Disney Store, following Disney’s purchase of Marvel. He was released along with an assortment of other Avengers figures, some being re-releases of earlier figures and some being all new. To date, I believe Cap is the only of the figures in that group not to see a release elsewhere, though there’s still time. Cap stands about 7 inches tall and features 25 points of articulation. The figure features a brand new sculpt, which is of…varying quality. For the most part, it’s good. It’s based on artist John Cassidy’s depiction of the character, which is a great starting point. The upper body is all good, with great scale details on his upper torso, and some wonderful detail work in the folds on his sleeves and gloves. The head isn’t perfect, but it’s actually pretty good. Aside from the eyes being a little bit too big, it looks great. The biggest issue with the sculpt is the legs, or more importantly, the hip joints. I’m not sure what they were going for, but they sit too low, and distract from the flow of the sculpt without offering much in the way of articulation. I essence, it’s a total fail. It’s especially disappointing given the great sculpted work and range of articulation elsewhere on the figure. It’s almost like they ran out of time and had to rush to finish. For the most part, the paint work is in line with the better parts of the sculpt. Aside from some slightly off paint on his eyes, the paint looks really great. They’ve even added some nice texturing to bring out all of the sculpt’s little details. Cap includes his mighty shield and a stand based on Cassidy’s cover to Captain America Volume 4 Issue 6, which is a nice touch. My only issue is the way the shield connects to Cap’s arm, which is haphazard at best.

THE ME HALF OF THE EQUATION

After getting bitten pretty seriously by the Marvel Select bug with the Disney Store Exclusive Hawkeye and Black Widow, I came across Captain America at my local Disney Store. He was marked down a few dollars and he looked like a pretty decent version of Cap, so I decided I might as well get him. As fate would have it, he was even more marked down than I thought, so I got him for quite a deal. All in all, he’s probably one of the better basic Captain America figures to see release in the last few years, even with a few minor issues.

CaptainAmericaAlt

#0253: Captain America – Rescue Version

Posted by Ethan Wilson in Reviews and tagged with , , ,

CAPTAIN AMERICA – RESCUE VERSION

S-WORLD MINIFIGURES

CapRescue

Today continues my first real look into the seedy underbelly of toys: Bootlegs! Yesterday, I took a look at Black Lantern Hal Jordan, who provided me a chance to acquire one of my favorite characters, albeit in a slightly less default look, in the Lego style. Today, I’ll be jumping over to the Marvel side, with a one of my favorite non-default looks of a character.

THE FIGURE ITSELF

Captain America is just as much a bootleg as yesterday’s Black Lantern, which means he’s not officially tied to any series, outside of the vague “S-World Minfigures” printed on his display stand. Unlike Hal, I haven’t even been able to tie this one to a larger set. He’s just here. Cap stands about 2 inches tall and has 7 points of articulation. He’s built on the bootlego body, which is a near perfect replica of the real Lego body. The figure is based on Cap’s “Rescue” look from Captain America: The First Avenger, which is a look I quite like. He features one add-on, a helmet, which seems to be a bootleg of the piece used on Lego’s green army men from Toy Story. The figure’s paint is once again impressive for such a back alley figure. The eyes are perhaps a bit soulless, and the helmet has been incorrectly adorned with a star instead of the proper A, but otherwise, everything looks pretty great. The figure is accessorized with a shield (based on his pre-circular one), a machine gun and a display stand.

THE ME HALF OF THE EQUATION

As with Black Lantern, I picked Cap up from a dealer at Mego Meet, before fully knowing the details of his creation. Cap is actually still more of a mystery to me than the other two I picked up, as I have yet to find any evidence of other people having this one. Nevertheless, I’m a big fan of this particular design for the character, and I was thrilled to be able to acquire in yet another style, even if he is less than official.

#0236: Captain America – Stealth Uniform & Brock Rumlow

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CAPTAIN AMERICA – STEALTH UNIFORM & BROCK RUMLOW

MARVEL MINIMATES

Cap&Rumlow

You’ve read my reviews for the first two sets in the Captain America: The Winter Soldier Minimates line-up. Today’s part three. The excitement from the first two parts still remains, but I think I’ve gotten pretty good at keeping my composure. Hopefully. Anyway, I’m looking at yet another Captain America, plus SHIELD agent Brock Rumlow *SPOILER*

…one of the movie’s villains. Do they keep the excitement going? Let’s find out!

THE FIGURES THEMSELVES

Cap and Rumlow were released as part of Marvel Minimates Series 55, which was done as a tie-in to this summer’s Captain America: The Winter Soldier.

CAPTAIN AMERICA – STEALTH UNIFORM

CapStealthCap is built on the standard Minimate body, which means he stands about 2 ½ inches tall and features 14 points of articulation. He’s based on Cap’s stealth look from the movie, which has also been referred to as his “STRIKE Team” look. It’s what he wears during the film’s opening mission and during most of his scenes at the SHIELD headquarters, and it’s also the look seen on most of the promotional stuff for the movie. To convey this look, the figure features sculpted helmet, shoulder harness, wrist straps and belt add-ons, in addition to the base Minimate body. The wrist straps appear to be a re-use from Series 34’s 90s Cyclops, but everything else looks to be brand-new to this figure. Everything seems to be accurate to Cap’s look in the film, and there is plenty of sculpted detail work on each piece. The paint work on Cap is pretty good, though there are a few spots of error. The silver detailing of the “A” on his helmet doesn’t quite line up with the sculpted boarders and there are a few instances of underlying colors not lining up with the detail lines. Also, the wings on the sides of his helmet have been left unpainted, but this seems to be consistent across all versions of this figure. Other than that, the paint work is very nice. All the detail lines are nice and crisp, the likeness on the face presents and uncanny resemblance to Chris Evans, and some of the small details on the uniform are nothing short of amazing. Cap is accessorized with a spare hairpiece, an extra hand for holding the shield, a display stand, and, of course, his mighty shield, this time in stealth colors.

BROCK RUMLOW

RumlowRumlow is built on the same base body as Cap, which means he has the same articulation and relative height. For those of you less in the know with Cap stuff, Rumlow is a SHIELD agent destined to become the villain Crossbones, who worked as the Red Skull’s right-hand man and has been a recurring Captain America villain for many years. His figure here is based on his look in the movie, in his “pre-Crossbones” form, and specifically takes Rumlow’s look from the movie’s final act. A lot of the figures in this series take their looks from that portion of the movie, so it’s nice to see Rumlow stick with the theme. Rumlow features sculpted hair, vest, belt, and holster add-ons to aid with the look. The hair is a re-use from Series 17’s Eddie Brock, and the holsters are from Series 45’s Maria Hill. The belt might be a re-use, but it’s a bit too generic for me to tell. The vest appears to be an all-new piece. All of these parts go together well, and result in a pretty much spot on figure of the character. The paint work on Rumlow is good, but not spotless. The paint on his gloves is splotchy and the edges of his boots have very fuzzy lines, but the detail work is superb, just like the rest of the series. The vest can be removed to show the straps that he had under his vest in the movie, which is a nice touch. Rumlow is accessorized with two hand guns, a sub machine gun, his electro-shock thingy, and a clear display stand.

THE ME HALF OF THE EQUATION

As I’ve mentioned in previous reviews, I was out of town for the release of this series. Thankfully, my dad was nice enough to get a set of them for me, which was very cool of him. I really liked Cap’s stealth suit in the movie, so I’m happy to see that it turned out well, and that it wasn’t plagued by the same paint issues as the Classic Cap. I was also happy to get Rumlow, who has been over looked by other lines based on the movie. He was a fairly important character in the movie, and the Minimate is a great representation of him. All in all, this set is more in line with Widow and Falcon, which is a good thing. I’m happy to see Diamond putting such amazing work into this line.

#0234: Captain America – Classic & Winter Soldier

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

CAPTAIN AMERICA – CLASSIC & WINTER SOLDIER

MARVEL MINIMATES

Cap&WinterSoldier

I love Minimates. That’s no secret. I also loved Captain America: The Winter Soldier (I’ve seen it six times). These are things that have been said many times on this site. So why bring them up? BECAUSE I JUST GOT THE MINIMATES FROM CAPTAIN AMERICA: THE WINTER SOLDER! Whoa, sorry about that. I’m very excited. You see, short of spending an insane amount of money on the Hot Toys figures, the Minimates are the only way to get all of the main characters in a single scale. Plus they’re Minimates! Today, I’ll be kicking off my reviews of the series with the film’s two title characters: Captain America and The Winter Soldier!

THE FIGURES THEMSELVES

This set was released as part of Marvel Minimates Series 55, which was a series based on the Captain America: The Winter Soldier film released this summer.

CAPTAIN AMERICA – CLASSIC

CapClassic

Cap, like just about every other Minimate, is built on the standard Minimate body. As such, he stands about 2 ½ inches tall and features 14 points of articulation. This figure depicts Cap in his “classic” costume from the movie, which is the one he wears during the last act of the film. It’s essentially his uniform from The First Avenger, but it tweaks the stripes on the abdomen, brightens the brown areas, and ditches the holster and side-arm from that film. The figure features sculpted helmet and belt add-ons to help facilitate the look. Both of these pieces appear to be new to this figure, sharply sculpted and look spot on to the movie. The paint work on this figure is a bit mixed. To Diamond’s credit, the detail line work is nothing short of amazing. All the lines are nice and sharp, and the level of detailing is just great! They’ve even succeeded in giving us a pretty great Chris Evans likeness. Unfortunately, the base paint work is not so great. The ends of his gloves are very uneven, the colors routinely go out of detail lines, and you can see that the A on the helmet is pretty far off center. Also, my Cap’s helmet has a smear of silver across the nose, which is incredibly distracting. Cap includes a spare hair piece, his mighty shield, a hand to attach the shield to, and a clear display stand.

WINTER SOLDIER

WinterSoldierUnmaskedWinter Soldier is built on the same basic body as Cap, so he has all the same stats there. He depicts the main Winter Soldier look in the film, the same one shown on all the other WS merchandise. Given its presence in most of the Soldier’s important scenes, I’ve got no complaints there. Bucky features five sculpted add-ons: Mask/Hair, shoulder gear, belt, and a holster for both legs. These pieces all look to be new to this figure, and they all seem to do an admirable job replicating Bucky’s look in the movie. The mask perhaps sits a bit too low, but it’s not so low that it ruins the figure. Bucky seems to have come out a bit better than Cap in the paint department. Like Cap, all of the detail lines are really sharp, and the work on the legs in particular is quite impressive. The Sebastian Stan likeness is much better this time than it was on Diamond’s version of Bucky from the first film. On a side note: Am I the only one that didn’t really notice the eye shadow in the movie? I saw it in one or two scenes, but it was mostly absent. Yet, every single figure has it caked on there. Fortunately, it’s handled pretty well here, nowhere near the monstrosity that was the Hasbro version. The best part of this figure is his accessory selection. He’s armed to the teeth, with a sniper rifle, two sub machine guns, a hand gun, and two knives, plus an alternate hairpiece without the mask and a clear display stand thrown in for good measure! One additional thing I might have liked to have seen is a hair piece without the goggles, to replicate his look from his first fight with Cap, but I wouldn’t want to be too greedy.

THE ME HALF OF THE EQUATION

This series was originally supposed to be released closer to the film’s opening weekend, but was met with a few delays. They were finally released the first week in June, while I happened to be out of town. Fortunately, my awesome dad picked them up for me the day they came out. He even brought them with him when he came to bring me home!

While I’m not quite as happy with the paint on Cap as I’d have liked, the overall work on these figures is pretty great, and Winter Soldier is at the very least the most accurate version of the character available, if not the best! I’m hopeful that the issues with Cap are more or less limited to my set, as I’d hate to see this be a widespread issue.

#0231: Arnim Zola & Captain America

Posted by Ethan Wilson in Reviews and tagged with , , , ,

ARNIM ZOLA & CIVIL WAR CAPTAIN AMERICA

MARVEL MINIMATES

ArnimZola&Cap ArnimZola&CapAlt2

Minimates. What more can I say. I’ve reviewed them numerous times before, and I try to think of original anecdotes about them, but there’s really only so much you can say. Still, they are the greatest toyline on the market today, so that’s a big plus. Today, I’ll be looking at Arnim Zola, a recurring Captain America foe, and Captain America himself.

THE FIGURES THEMSELVES

These two were released as part of the 42nd series of Marvel Minimates. That particular series was meant to loosely tie-in with Thor and Captain America: The First Avenger, which were both released the same year.

ARNIM ZOLA

Arnim is presented here in his classic “face on a chest monitor” look, which is definitely the one to go with if you’re doing an Arnim Zola figure. He’s built on the usual Minimate body, so he has 14 points of articulation and stands around 2 ½ inches tall. Arnim features a uniquely sculpted camera head and torso piece, as well as reused “puffy sleeves.” The pieces work pretty well, and give a nice depiction of the character’s usual look. The paint work on the figure is all nice and clean, with no slop, bleed-over, or fuzzy lines. He also features some impressive detail work on his “torso face” which pretty much perfectly replicates Arnim’s snickering, disembodied face.

CIVIL WAR CAPTAIN AMERICA

Yes, it’s another Cap. This one has been dubbed “Civil War Captain America” but I’m not really sure why. Cap wasn’t involved with the historical American Civil War (and if he had been, I doubt he would have dressed this way) which only leaves the Marvel cross-over of the same name. However, Cap doesn’t dress like this in that story. It seems that the real inspiration for Cap was actually his incarnation on Avengers: Earth’s Mightiest Heroes, where he was frequently seen wearing a similar outfit while riding around on his motorcycle. At any rate, the figure is built on the basic Minimate body like Arnim, so he’s got the usual stats. He features a sculpted helmet, jacket, belt, left hand w/ shield strap, and boots. All of the pieces have been used before, with the helmet coming from Ultimate WW2 Cap, the jacket coming from James Rhodes, the belt coming from Cap reborn, the hand coming from one of the movie Caps, and the boots coming from numerous figures. The pieces are all good pieces and work pretty nicely. The painted details aren’t bad, though I’m not the biggest fan of Cap’s face. The Avengers logo on his arm is also a nice touch. Cap includes a spare set of arms and gloves and a proper Cap mask to allow you to display him as a more basic Cap, as well as a hairpiece for all those wanting him unmasked.

THE ME HALF OF THE EQUATION

I got these two along with the rest of series 42 from my favorite online retailer, Luke’s Toy Store! I mostly bought the series for the Thor sets included, but I wanted this one too, mostly for Arnim. In hand, I think they’re both pretty solid ‘mates, but Cap suffers from some serious redundancy.

#0225: Captain America – Now!

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CAPTAIN AMERICA – NOW!

MARVEL LEGENDS INFINITE SERIES

CapNow!

In my Spider-Girl review, I discussed the different reasons for buying figures. My decision to purchase the figure of today’s review is firmly planted in the “completing a Build-A-Figure” camp. I wouldn’t want my poor Mandroid figure to forever be headless, now would I? Getting that piece also meant getting this figure. In all fairness, I’ve bought worse figures for sillier reasons. Anyway, the figure is the somewhat demanding sounding Captain America – Now! Let’s see how this one turned out!

THE FIGURE ITSELF

Cap was released as part of the first series of Captain America: The Winter Soldier Marvel Legends Infinite Series, and is also going to be seeing a re-release in the second set of revision cases for series two. Cap stands a bit over 6 inches tall and has 32 points of articulation. As the title indicates, Cap is based on his appearance from Marvel’s recent Marvel Now! initiative. I don’t think it has the lasting power of the classic design, but it’s not a bad design, and it is the character’s current look, so it’s nice to see it released. Cap features an all new sculpt, and it’s a pretty good one. He’s got some great texture work, and I quite like the hexagonal pattern on the torso and upper arms. For some reason, the sculpt on the face seems a bit off for Cap. I think that the chin might be a bit too short and the mouth might be a touch too big. The paint work is okay overall, but there are a few spots of noticeable slop, plus a fair bit of inconsistent application on the red stripes on his lower torso. It’s not too distracting, but it is quite noticeable with minor inspection.  Cap seems to be a bit light in the accessories department, especially compared to the rest of the line. He’s limited to his shield, which is reused from Ultimate Cap from the previous Marvel Legends line, and the Mandroid’s head, which happens to be the smallest of the Mandroid pieces as well. It leaves the figure feeling a bit light, but I suppose the figure itself does seem to have a bit more heft than the others.

CapNow!2CapNow!3

THE ME HALF OF THE EQUATION

This Cap was not amongst the figures I recently received from Big Bad Toystore. However, when I realized that I’d have all of the Mandroid pieces save the head, I figured I’d go ahead and pick him up. I ended up getting him from Amazon, at a slightly marked up price. Seems the figure’s become a bit more desirable since Series two was released. He’s not a bad figure, but he’s not my Cap. At best, he’s an amusing variant. Which isn’t the worst thing, truth be told. He’s a solid addition to a great line.

#0220: Captain America – S.T.R.I.K.E. Suit

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

CAPTAIN AMERICA – STRIKE SUIT

MARVEL LEGENDS INFINITY SERIES

CapStrikeSuit1

It’s still early into the summer movie season, but I think it’s going to be hard to topple Captain America: The Winter Soldier from its spot at the top of my list. The movie really resonated with me, and unsurprisingly, I wanted all my favorite characters from it in action figure form. I already picked up and reviewed three of the smaller scale figures, and the Minimates are still a little ways out, but the ones I was really interested in getting were Hasbro’s 6-inch scale versions, released as part of their latest incarnation of Marvel Legends. I finally managed to get a set, and today I’ll be starting my reviews off with the main man himself, Captain America! Foes who oppose the shield, you’d best prepare to yield!

THE FIGURE ITSELF

Cap was released as part of the second series of the Captain America: The Winter Soldier Marvel Legends Infinity Series. Man, is that a long name! He’s presented here in his S.T.R.I.K.E Team suit from The Winter Soldier. That suit is in turn based on Cap’s Commander Rodgers from the time he was Director of SHIELD for a while in the comics. The figure stands a bit over 6 inches tall and sports 32 points of articulation. The figure features an all new sculpt, and it’s a really good one at that. The body has excellent proportions, and the uniform has a great variety of textures, just the real thing. The main head sculpt (the helmeted one) is a very nice piece of work. The face isn’t spot on to Chris Evans, but it’s a decent attempt, and the helmet looks pretty much spot-on to the one featured in the movie. The figure also sports an add-on belt piece, which aids in giving the figure a bit more dimension. The paint work doesn’t quite live up to the sculpt. There are a few noticeable spots of bleed over, though there doesn’t seem to be any outright slop. There are still some nice touches, such as the American flag and “ROGERS” name tag on his left shoulder, and the SHIELD logo on his right shoulder. These could have easily been overlooked, but their inclusion really adds to the figure. Cap is quite well accessorized, with an extra unmasked head, saluting and pointing hands, his mighty shield, and the right leg to this line’s Build-A-Figure, the Mandroid. The extra head is nice, though it looks even less like Evans than the main sculpt. The extra hands add a bit of extra character, and I especially love the pointing finger. It’s got a lot of possible uses. I’ll be covering the Mandroid after the rest of the reviews are done, which just leaves the shield. It’s a well sculpted piece, but it does seem a bit large for Cap. Not too much, but still noticeable. Also, they’ve gone with the all blue look, which I suppose goes with the costume, but given that it’s only in one scene of the movie, it would have been nice to get a regularly colored version.

CapStrikeSuit2 CapStrikeSuit3 CapStrikeSuit4

THE ME HALF OF THE EQUATION

I received Cap and the rest of Series 2 from Big Bad Toystore just the other day. I’ve had the set pre-ordered for a while in order to insure I got all three of the movie related figures. Cap is a really good figure, and one of the best Captain America figures that Hasbro has produced. I’d love to see this level of detail applied to a more classic Cap design. Still, I loved this design in the movie, and I’m glad to have a top-notch figure of it in my collection.